oil explosion well - electricmotorsforless.com

Explosio

n Proof &

Oil W

ell P

ump M

otors

2018

Explosion Proof & Oil Well Pump Motors Explosion Proof—2, 4, 6‐Pole NEMA Design D—6, 8‐Pole

2

ptjindustrial.com 800.724.2961 © 1/18 North American Electric, Inc. Explosion Proof & Oil Well Pump Motor Brochure—2018

MISSION STATEMENT To provide complete automa on solu ons for the United States and interna onal market with products and service that meet or exceed customer expecta ons for quality, performance, and reliability at the lowest possible cost and delivered within the customer’s schedule, through our authorized distribu on network.

COMPANY HISTORY North American Electric opened its doors in 1993 and began distribu ng high quality electric motors, electric motor control panels and sha mount gearing through our distributors and OEM network across the country. We are a UL 508A panel shop and we package Across the Line Starters, Part Wind Starters, So Starters and Variable Frequency Drives as well as Custom Panels. We offer pre‐engineered panels for General Purpose applica ons as well as Special Purpose panels for the Oil and Gas and Irriga on markets.

Motor Controls Motors Gear Reducers

3


CRUSHER DUTY MOTORS 1 HP—600 HP; 4, 6 or 8‐Pole NEMA Design C Totally Enclosed Fan Cooled Inverter Duty (20:1 VT; 10:1 CT)—(1 HP—300 HP)Inverter Rated (10:1 VT; 5:1 CT)—(250 HP—600 HP)

MOTOR SLIDE BASES Available 56 through 505U Single‐Adjusting Screw Type—(56—145T Frame) Double‐Adjusting Screw Type—(182T—505U Frame)

MOTOR CONTROLS: SAFETY SWITCHES ACROSS THE LINE STARTERS PART WIND STARTERS SOFT STARTERS VFDs

SHAFT MOUNT REDUCERS & ACCESSORIES Sizes 2—10 Gear Ratios: 15:1 & 25:1 Screw Conveyor Adaptors Available Repair kits Also Available

ROTARY UNIT FOR ROTARY PHASE CONVERTER 3 HP—60 HP; 4‐Pole For Use with Rotary Phase Converters To Run Three Phase Equipment From Single Phase Power Totally Enclosed Fan Cooled

VERTICAL HOLLOW SHAFT PUMP MOTORS 10 HP—500 HP; 4‐Pole Extra High Thrust/Double Stacked Bearings Available Inverter Rated (10:1 VT) or Inverter Duty (20:1 VT)

OIL WELL PUMP MOTORS, ODP 7.5 HP—100 HP; 6‐Pole NEMA Design D; High Slip (5% To 8% Slip) Special Purpose Oil Well Pump Motors Inverter Duty (20:1 VT; 10:1 CT)

OIL WELL PUMP MOTORS, TEFC 2 HP—150 HP; 6 or 8‐Pole NEMA Design D; High Slip (5% To 8% Slip) Special Purpose Oil Well Pump Motors Inverter Duty (20:1 VT; 10:1 CT)

EXPLOSION PROOF MOTORS 1—250 HP; 2, 4 or 6‐Pole All Motors Meet Or Exceed UL 674 Specification As Required By OSHA For Installation And Use In Hazardous Locations Totally Enclosed Explosion Proof (TEXP) Inverter Rated (10:1 VT; 5:1 CT)

CLOSE COUPLED PUMP MOTORS 1 HP—75 HP; 2 or 4‐Pole Totally Enclosed Fan Cooled Inverter Duty (20:1 VT; 10:1 CT)

STAINLESS STEEL WASHDOWN DUTY MOTORS 1/3 HP—20 HP; 2, 4, or 6‐Pole C‐Flange with Feet or Round Body Inverter Duty (20:1 VT; 10:1 CT)

THREE‐PHASE, OPEN DRIP PROOF 1 HP—20 HP; 2, 4 or 6‐Pole High Starting Torque Rolled Steel Construction

THREE‐PHASE, TEFC 1 HP—10 HP; 2 or 4‐Pole High Starting Torque Rolled Steel Construction

THREE‐PHASE, 56C FRAME, TEFC 1/3 HP—3 HP; 2 or 4‐Pole High Starting Torque Rolled Steel Construction Removable Feet

SINGLE PHASE, OPEN DRIP PROOF 3 HP–5 HP; 2 or 4‐Pole High Starting Torque Capacitor Start / Capacitor Run Design Rolled Steel Construction

SINGLE PHASE, FARM DUTY, TEFC 1/3 HP—10 HP; 2 or 4‐Pole High Starting Torques Manual Overload Protection (1/3 – 5 HP) Capacitor Start / Capacitor Run Design Rolled Steel Construction

SINGLE PHASE, 56C FRAME, TEFC 1/3 HP—2 HP; 2 or 4‐Pole High Starting Torques Capacitor Start / Capacitor Run Design Rolled Steel Construction Removable Feet

ROUND BODY MOTORS 1 HP—30 HP; 4‐Pole; 1800 RPM C‐Flange without Feet Totally Enclosed Fan Cooled Inverter Duty (20:1 VT; 10:1 CT)

ALUMINUM FRAME INVERTER DUTY MOTORS 1 HP—10 HP; 2 or 4‐Pole Totally Enclosed Fan Cooled Inverter Duty (20:1 VT; 10:1 CT)

GENERAL PURPOSE INVERTER DUTY MOTORS 1 HP—300 HP; 2, 4, 6 or 8‐Pole NEMA Design B Totally Enclosed Fan Cooled or Open Drip Proof Inverter Duty (20:1 VT; 10:1 CT)

4


Explosion Proof Three‐Phase, 143T—449T Frame Totally Enclosed Explosion Proof (TEXP) Inverter Rated (10:1 VT; 5:1 CT) NEMA MG‐1, TABLE 12‐12

1 HP—250 HP EXPLOSION PROOF

CAST IRON INVERTER RATED (10:1 VT; 5:1 CT)

143T—449T FRAME THREE‐PHASE

TEXP

Standard Features Include: ❶ 1 HP—250 HP in Stock

❷ 1.15 Service Factor @ 60 Hertz; 1.0 Service Factor @ 50 Hertz

❸ Sealed Bearings Through 215T Frame;

Regreasable Open Bearings 254T Frame and Above

❹ Class F Insula on System; Class B Rise at Full Load;

Class H Vacuum Pressure Impregna on (VPI) Resin for All Windings

❺ Hazardous Loca ons Classifica on:

140T—210T = See Page 20, Table 1



❻ Stainless Steel Nameplate and Zinc Plate Hardware

❼ NEMA Design B Performance

❽ Feet are Dual Drilled for Moun ng Flexibility

❾ Dual Voltage Ra ngs Suitable for Part Wind Start on Lower Voltage

❿ Corrosion Resistant Epoxy Paint

⓫ F1/F2 Reversible

⓬ Li ing Provision

⓭ Cast Iron Frame Construc on

⓮ IP55 Protec on

⓯ Suitable for Use With Variable Frequency Drives⓰ Two‐Year Warranty⓱ C‐Flange Conversion Kits Available

APPLICATIONS:

For use on pumps, fans, blowers, compressors, material handling and other industrial and commercial machinery installed in damp, dusty or dirty environments. These motors are designed to be used in hazardous loca ons as defined by class and group.

CATALOG FRAME LIST MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES1 1800 143T 208-230/460 PEXP143T-1-4 NEXP $810 M5 85.5 12.6 621 1200 145T 208-230/460 PEXP145T-1-6 NEXP $895 M5 82.5 14.6 79

1.5 3600 143T 208-230/460 PEXP143T-1.5-2 NEXP $830 M5 84.0 12.6 731.5 1800 145T 208-230/460 PEXP145T-1.5-4 NEXP $890 M5 86.5 14.6 881.5 1200 182T 208-230/460 PEXP182T-1.5-6 NEXP $1,010 M5 87.5 16.1 1152 3600 145T 208-230/460 PEXP145T-2-2 NEXP $925 M5 85.5 14.6 752 1800 145T 208-230/460 PEXP145T-2-4 NEXP $1,010 M5 86.5 14.6 882 1200 184T 208-230/460 PEXP184T-2-6 NEXP $1,275 M5 88.5 17.1 1303 3600 182T 208-230/460 PEXP182T-3-2 NEXP $1,175 M5 86.5 16.1 1153 1800 182T 208-230/460 PEXP182T-3-4 NEXP $1,225 M5 89.5 16.1 1303 1200 213T 208-230/460 PEXP213T-3-6 NEXP $1,500 M5 89.5 18.9 2385 3600 184T 208-230/460 PEXP184T-5-2 NEXP $1,465 M5 88.5 17.1 1285 1800 184T 208-230/460 PEXP184T-5-4 NEXP $1,465 M5 89.5 17.1 1835 1200 215T 208-230/460 PEXP215T-5-6 NEXP $1,999 M5 89.5 20.4 295

7.5 3600 213T 208-230/460 PEXP213T-7.5-2 NEXP $1,725 M5 89.5 18.9 2537.5 1800 213T 208-230/460 PEXP213T-7.5-4 NEXP $1,899 M5 71.7 18.9 2547.5 1200 254T 208-230/460 PEXP254T-7.5-6 NEXP $2,250 M5 91.0 23.2 38610 3600 215T 208-230/460 PEXP215T-10-2 NEXP $1,999 M5 90.2 20.4 26210 1800 215T 208-230/460 PEXP215T-10-4 NEXP $2,065 M5 91.7 20.4 26210 1200 256T 208-230/460 PEXP256T-10-6 NEXP $2,799 M5 91.0 25.0 38415 3600 254T 208-230/460 PEXP254T-15-2 NEXP $2,799 M5 91.0 23.2 40115 1800 254T 208-230/460 PEXP254T-15-4 NEXP $2,799 M5 92.4 23.2 40315 1200 284T 208-230/460 PEXP284T-15-6 NEXP $3,650 M5 91.7 26.6 476

5


1 460V Only

Explosion Proof Three‐Phase, 143T—449T Frame Totally Enclosed Explosion Proof (TEXP) Inverter Rated (10:1 VT; 5:1 CT) NEMA MG‐1, TABLE 12‐12

CATALOG FRAME LIST MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES20 3600 256T 208-230/460 PEXP256T-20-2 NEXP $3,050 M5 91.0 25.0 43420 1800 256T 208-230/460 PEXP256T-20-4 NEXP $3,200 M5 93.0 25.0 42820 1200 286T 208-230/460 PEXP286T-20-6 NEXP $4,450 M5 91.7 28.1 52025 3600 284TS 208-230/460 PEXP284TS-25-2 NEXP $3,750 M5 91.7 25.2 50625 1800 284T 208-230/460 PEXP284T-25-4 NEXP $3,775 M5 93.6 26.6 55825 1200 324T 208-230/460 PEXP324T-25-6 NEXP $5,150 M5 93.0 29.8 65730 3600 286TS 208-230/460 PEXP286TS-30-2 NEXP $4,450 M5 91.7 26.7 52830 1800 286T 208-230/460 PEXP286T-30-4 NEXP $4,300 M5 93.6 28.1 58030 1200 326T 208-230/460 PEXP326T-30-6 NEXP $6,350 M5 93.0 31.3 73940 3600 324TS 208-230/460 PEXP324TS-40-2 NEXP $5,285 M5 92.4 28.3 71040 1800 324T 208-230/460 PEXP324T-40-4 NEXP $5,500 M5 94.1 29.8 73440 1200 364T 208-230/460 PEXP364T-40-6 NEXP $7,635 M5 94.1 32.5 91150 3600 326TS 208-230/460 PEXP326TS-50-2 NEXP $7,100 M5 93.0 29.8 74350 1800 326T 208-230/460 PEXP326T-50-4 NEXP $6,750 M5 94.5 31.3 76350 1200 365T 208-230/460 PEXP365T-50-6 NEXP $8,500 M5 94.1 33.5 89960 3600 364TS 208-230/460 PEXP364TS-60-2 NEXP $7,950 M5 93.6 31.4 86060 1800 364T 208-230/460 PEXP364T-60-4 NEXP $8,200 M5 95.0 32.5 89160 1200 404T 208-230/460 PEXP404T-60-6 NEXP $10,500 M5 94.5 38.0 118875 3600 365TS 208-230/460 PEXP365TS-75-2 NEXP $10,200 M5 93.6 31.4 94675 1800 365T 208-230/460 PEXP365T-75-4 NEXP $9,400 M5 95.4 33.5 95775 1200 405T 208-230/460 PEXP405T-75-6 NEXP $12,000 M5 94.5 38.0 1349

100 3600 405TS 208-230/460 PEXP405TS-100-2 NEXP $12,000 M5 94.1 35.0 1393100 1800 405T 208-230/460 PEXP405T-100-4 NEXP $12,100 M5 95.4 38.0 1426100 1200 444T 208-230/460 PEXP444T-100-6 NEXP $16,850 M5 95.0 44.3 1642125 3600 444TS 460 PEXP444TS-125-2 NEXP $15,100 M5 95.0 40.6 1638 1125 1800 444T 460 PEXP444T-125-4 NEXP $15,200 M5 95.4 44.3 1640 1125 1200 445T 460 PEXP445T-125-6 NEXP $21,000 M5 95.0 44.3 1779 1150 3600 445TS 460 PEXP445TS-150-2 NEXP $21,000 M5 95.0 40.6 1830 1150 1800 445T 460 PEXP445T-150-4 NEXP $22,750 M5 95.8 44.3 1898 1150 1200 447T 460 PEXP447T-150-6 NEXP $26,500 M5 95.8 47.8 2174 1200 3600 447TS 460 PEXP447TS-200-2 NEXP $26,500 M5 95.4 44.1 2370 1200 1800 447T 460 PEXP447T-200-4 NEXP $26,500 M5 96.2 47.8 2348 1200 1200 449T 460 PEXP449T-200-6 NEXP $30,500 M5 95.8 52.8 2368 1250 3600 449TS 460 PEXP449TS-250-2 NEXP $29,400 M5 95.8 49.1 2370 1250 1800 449T 460 PEXP449T-250-4 NEXP $28,500 M5 96.2 52.8 2381 1

1 HP—250 HP EXPLOSION PROOF



TEXP

6


1 HP—200 HP EXPLOSION PROOF C‐FLANGE W/ FEET


143TC—449TC FRAME THREE‐PHASE

TEXP

Explosion Proof Three‐Phase, 143TC—449TC Frame Totally Enclosed Explosion Proof (TEXP)

NEMA MG‐1, TABLE 12‐12 Inverter Rated (10:1 VT; 5:1 CT)

APPLICATIONS:

For use on pumps, fans, blowers, compressors, material handling and other industrial and commercial machinery installed in damp, dusty or dirty environments. These motors are designed to be used in hazardous loca ons as defined by class and group.

CATALOG FRAME LIST MULT. FULL C WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES1 1800 143TC 208-230/460 PEXP143TC-1-4 NEXP $834 M5 85.5 12.6 621 1200 145TC 208-230/460 PEXP145TC-1-6 NEXP $922 M5 82.5 14.6 79

1.5 3600 143TC 208-230/460 PEXP143TC-1.5-2 NEXP $855 M5 84 12.6 731.5 1800 145TC 208-230/460 PEXP145TC-1.5-4 NEXP $917 M5 86.5 14.6 881.5 1200 182TC 208-230/460 PEXP182TC-1.5-6 NEXP $1,040 M5 87.5 16.1 1151.5 3600 145TC 208-230/460 PEXP145TC-2-2 NEXP $953 M5 85.5 14.6 752 1800 145TC 208-230/460 PEXP145TC-2-4 NEXP $1,040 M5 86.5 14.6 882 1200 184TC 208-230/460 PEXP184TC-2-6 NEXP $1,313 M5 88.5 17.1 1303 3600 182TC 208-230/460 PEXP182TC-3-2 NEXP $1,210 M5 86.5 16.1 1153 1800 182TC 208-230/460 PEXP182TC-3-4 NEXP $1,262 M5 89.5 16.1 1303 1200 213TC 208-230/460 PEXP213TC-3-6 NEXP $1,545 M5 89.5 18.9 2385 3600 184TC 208-230/460 PEXP184TC-5-2 NEXP $1,509 M5 88.5 17.1 1285 1800 184TC 208-230/460 PEXP184TC-5-4 NEXP $1,509 M5 89.5 17.1 1835 1200 215TC 208-230/460 PEXP215TC-5-6 NEXP $2,059 M5 89.5 20.4 295

7.5 3600 213TC 208-230/460 PEXP213TC-7.5-2 NEXP $1,777 M5 89.5 18.9 2537.5 1800 213TC 208-230/460 PEXP213TC-7.5-4 NEXP $1,956 M5 91.7 18.9 2547.5 1200 254TC 208-230/460 PEXP254TC-7.5-6 NEXP $2,318 M5 91 23.2 38610 3600 215TC 208-230/460 PEXP215TC-10-2 NEXP $2,059 M5 90.2 20.4 26210 1800 215TC 208-230/460 PEXP215TC-10-4 NEXP $2,127 M5 91.7 20.4 26210 1200 256TC 208-230/460 PEXP256TC-10-6 NEXP $2,883 M5 91 25 38415 3600 254TC 208-230/460 PEXP254TC-15-2 NEXP $2,883 M5 91 23.2 40115 1800 254TC 208-230/460 PEXP254TC-15-4 NEXP $2,883 M5 92.4 23.2 40315 1200 284TC 208-230/460 PEXP284TC-15-6 NEXP $3,760 M5 91.7 26.6 47620 3600 256TC 208-230/460 PEXP256TC-20-2 NEXP $3,142 M5 91 25 43420 1800 256TC 208-230/460 PEXP256TC-20-4 NEXP $3,296 M5 93 25 42820 1200 286TC 208-230/460 PEXP286TC-20-6 NEXP $4,584 M5 91.7 28.1 520


❷ 1.15 Service Factor @ 60 Hertz; 1.0 Service Factor @ 50 Hertz

❸ Sealed Bearings Through 215T Frame;




❺ Hazardous Loca ons Classifica on:

140TC—210TC = See Page 20, Table 1




❼ NEMA Design B Performance

❽ Feet are Dual Drilled for Moun ng Flexibility

❾ Dual Voltage Ra ngs Suitable for Part Wind Start on Lower Voltage

❿ Corrosion Resistant Epoxy Paint

⓫ F1/F2 Reversible


⓭ Cast Iron Frame Construc on

⓮ IP55 Protec on

⓯ Suitable for Use With Variable Frequency Drives⓰ Two‐Year Warranty

7


CATALOG FRAME LIST MULT. FULL C WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES25 3600 284TSC 208-230/460 PEXP284TSC-25-2 NEXP $3,863 M5 91.7 25.2 50625 1800 284TC 208-230/460 PEXP284TC-25-4 NEXP $3,888 M5 93.6 26.6 55825 1200 324TC 208-230/460 PEXP324TC-25-6 NEXP $5,305 M5 93 29.8 65730 3600 286TSC 208-230/460 PEXP286TSC-30-2 NEXP $4,584 M5 91.7 26.7 52830 1800 286TC 208-230/460 PEXP286TC-30-4 NEXP $4,429 M5 93.6 28.1 58030 1200 326TC 208-230/460 PEXP326TC-30-6 NEXP $6,541 M5 93 31.3 73940 3600 324TSC 208-230/460 PEXP324TSC-40-2 NEXP $5,443 M5 92.4 28.3 71040 1800 324TC 208-230/460 PEXP324TC-40-4 NEXP $5,665 M5 94.1 29.8 73440 1200 364TC 208-230/460 PEXP364TC-40-6 NEXP $7,864 M5 94.1 32.5 91150 3600 326TSC 208-230/460 PEXP326TSC-50-2 NEXP $7,313 M5 93 29.8 74350 1800 326TC 208-230/460 PEXP326TC-50-4 NEXP $6,953 M5 94.5 31.3 76350 1200 365TC 208-230/460 PEXP365TC-50-6 NEXP $8,755 M5 94.1 33.5 89960 3600 364TSC 208-230/460 PEXP364TSC-60-2 NEXP $8,189 M5 93.6 31.4 86060 1800 364TC 208-230/460 PEXP364TC-60-4 NEXP $8,446 M5 95 32.5 89160 1200 404TC 208-230/460 PEXP404TC-60-6 NEXP $10,815 M5 94.5 38 118875 3600 365TSC 208-230/460 PEXP365TSC-75-2 NEXP $10,506 M5 93.6 31.4 94675 1800 365TC 208-230/460 PEXP365TC-75-4 NEXP $9,682 M5 95.4 33.5 95775 1200 405TC 208-230/460 PEXP405TC-75-6 NEXP $12,360 M5 94.5 38 1349100 3600 405TSC 208-230/460 PEXP405TSC-100-2 NEXP $12,360 M5 94.1 35 1393100 1800 405TC 208-230/460 PEXP405TC-100-4 NEXP $12,463 M5 95.4 38 1426100 1200 444TC 208-230/460 PEXP444TC-100-6 NEXP $17,356 M5 95 44.3 1642125 3600 444TSC 460 PEXP444TSC-125-2 NEXP $15,553 M5 95 40.6 1638 1125 1800 444TC 460 PEXP444TC-125-4 NEXP $15,656 M5 95.4 44.3 1640 1125 1200 445TC 460 PEXP445TC-125-6 NEXP $21,630 M5 95 44.3 1779 1150 3600 445TSC 460 PEXP445TSC-150-2 NEXP $21,630 M5 95 40.6 1830 1150 1800 445TC 460 PEXP445TC-150-4 NEXP $23,433 M5 95.8 44.3 1898 1150 1200 447TC 460 PEXP447TC-150-6 NEXP $27,295 M5 95.8 47.8 2174 1200 3600 447TSC 460 PEXP447TSC-200-2 NEXP $27,295 M5 95.4 44.1 2370 1200 1800 447TC 460 PEXP447TC-200-4 NEXP $27,295 M5 96.2 47.8 2348 1200 1200 449TC 460 PEXP449TC-200-6 NEXP $31,415 M5 95.8 52.8 2368 1

Explosion Proof Three‐Phase, 143TC—449TC Frame Totally Enclosed Explosion Proof (TEXP)

NEMA MG‐1, TABLE 12‐12 Inverter Rated (10:1 VT; 5:1 CT)

1 460V Only

1 HP—200 HP EXPLOSION PROOF C‐FLANGE W/ FEET


143TC—449TC FRAME THREE‐PHASE

TEXP

8


Oil Well Pump Three‐Phase, 184T—449T Frame Totally Enclosed Fan Cooled (TEFC) Inverter Duty (20:1 VT; 10:1 CT) NEMA Design D—High Torque/High Slip (5—8%)


❷ 1.15 Service Factor @ 60 Hertz

❸ Double Shielded Bearings through 215T Frame;




❺ 40o C Ambient Con nuous Duty


❼ NEMA Design D Performance

❽ High Torque/High Slip (5—8%)

❿ Dual Voltage Ra ngs Suitable for Part Wind Start on 230V

⓫ Corrosion Resistant Epoxy Paint

⓬ Li ing Provisions on 213T Frame and Above

⓭ Condensa on Drains with Plugs

⓮ Cast Iron Frame Construc on

⓯ Windings Rated for 2200V Peak Voltage Spikes

⓰ IP55 Protec on

⓱ Suitable for Use With Variable Frequency Drives⓲ Two‐Year Warranty (Extended Warranty Available)

❾ Thermistors in the Windings

APPLICATIONS:

Designed specifically for use on Oil Well Pumping Units. IP55 Protec on as standard for indoor and outdoor applica ons.

2 HP—150 HP OIL WELL PUMP

CAST IRON INVERTER DUTY (20:1 VT; 10:1 CT)


TEFC

CATALOG FRAME LIST MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES2 1200 184T 230/460/796 OWP184T-2-6 NEWT $765 M6 81.0 16.0 862 900 184T 230/460/796 OWP184T-2-8 NEWT $1,100 M6 75.0 16.0 923 1200 213T 230/460/796 OWP213T-3-6 NEWT $895 M6 79.0 18.9 1213 900 215T 230/460/796 OWP215T-3-8 NEWT $1,295 M6 80.0 20.4 1235 1200 215T 230/460/796 OWP215T-5-6 NEWT $1,085 M6 83.5 20.4 1395 900 254T 230/460/796 OWP254T-5-8 NEWT $1,600 M6 81.5 23.2 191

7.5 1200 254T 230/460/796 OWP254T-7.5-6 NEWT $1,615 M6 84.5 23.2 2507.5 900 256T 230/460/796 OWP256T-7.5-8 NEWT $1,950 M6 82.5 25.0 23510 1200 256T 230/460/796 OWP256T-10-6 NEWT $1,825 M6 85.0 25.0 27410 900 284T 230/460/796 OWP284T-10-8 NEWT $2,600 M6 84.0 26.6 28315 1200 284T 230/460/796 OWP284T-15-6 NEWT $2,465 M6 85.5 26.6 35015 900 286T 230/460/796 OWP286T-15-8 NEWT $3,000 M6 85.5 28.1 33720 1200 286T 230/460/796 OWP286T-20-6 NEWT $2,850 M6 86.0 28.1 37020 900 324T 230/460/796 OWP324T-20-8 NEWT $3,850 M6 87.5 29.8 45125 1200 324T 230/460/796 OWP324T-25-6 NEWT $3,400 M6 86.0 29.8 46625 900 326T 230/460/796 OWP326T-25-8 NEWT $4,185 M6 87.5 31.3 49330 1200 326T 230/460/796 OWP326T-30-6 NEWT $3,850 M6 86.5 31.3 51930 900 364T 230/460/796 OWP364T-30-8 NEWT $5,600 M6 87.5 32.5 62940 1200 365T 230/460/796 OWP365T-40-6 NEWT $5,250 M6 87.5 33.5 60940 900 365T 230/460/796 OWP365T-40-8 NEWT $5,950 M6 87.5 33.5 71050 1200 404T 230/460/796 OWP404T-50-6 NEWT $6,450 M6 87.5 36.5 70450 900 404T 230/460/796 OWP404T-50-8 NEWT $7,750 M6 88.5 36.5 89560 1200 405T 230/460/796 OWP405T-60-6 NEWT $7,025 M6 88.0 38.0 92660 900 405T 230/460/796 OWP405T-60-8 NEWT $9,500 M6 89.5 38.0 102575 1200 444T 460/796 OWP444T-75-6 NEWT $8,850 M6 90.0 44.3 104175 900 444T 460/796 OWP444T-75-8 NEWT $15,150 M6 91.7 44.3 1328

100 1200 445T 460/796 OWP445T-100-6 NEWT $11,800 M6 90.5 44.3 1316100 900 445T 460/796 OWP445T-100-8 NEWT $15,800 M6 91.7 44.3 1614125 1200 447T 460/796 OWP447T-125-6 NEWT $17,600 M6 92.5 47.800 1550150 1200 449T 460/796 OWP449T-150-6 NEWT $18,500 M6 93.2 52.800 1628

9


Oil Well Pump Three‐Phase, 254T—444T Frame Open Drip Proof (ODP) Inverter Duty (20:1 VT; 10:1 CT) NEMA Design D—High Torque/High Slip (5—8%)

Standard Features Include: ❶ 7.5 HP—100 HP in Stock

❷ 1.15 Service Factor @ 60 Hertz

❸ Regreasable Open Bearings 254T Frame and Above;

Mechanical Oil Seal on Both Ends for 254T Frame and Above



❺ 40o C Ambient Con nuous Duty


❼ NEMA Design D Performance

❽ High Torque/High Slip (5—8%)

❾ Thermistors in the Windings

❿ Dual Voltage Ra ngs Suitable for Part Wind Start on 230V

⓫ Corrosion Resistant Epoxy Paint


⓭ Condensa on Drains with Plugs

⓮ Cast Iron Frame Construc on

⓯ Windings Rated for 2200V Peak Voltage Spikes

⓰ IP23 Protec on

⓱ Suitable for Use With Variable Frequency Drives⓲ Two‐Year Warranty (Extended Warranty Available)

APPLICATIONS:

Designed specifically for use on Oil Well Pumping Units. IP23 Protec on as standard for indoor and outdoor applica ons.

7.5 HP—100 HP OIL WELL PUMP

CAST IRON INVERTER DUTY (20:1 VT; 10:1 CT)


ODP

CATALOG FRAME LIST MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES7.5 1200 254T 230/460/796 OWP254T-7.5-6-ODP NEWT $1,500 M6 79.2 26.2" 24010 1200 256T 230/460/796 OWP256T-10-6-ODP NEWT $1,675 M6 81.5 26.2" 25715 1200 284T 230/460/796 OWP284T-15-6-ODP NEWT $2,275 M6 84.8 29.6" 34120 1200 286T 230/460/796 OWP286T-20-6-ODP NEWT $2,800 M6 84.6 29.6" 36325 1200 324T 230/460/796 OWP324T-25-6-ODP NEWT $3,150 M6 86.7 33.3" 41330 1200 326T 230/460/796 OWP326T-30-6-ODP NEWT $3,699 M6 86.7 33.3" 47340 1200 365T 230/460/796 OWP365T-40-6-ODP NEWT $4,850 M6 86.0 35.3" 61950 1200 404T 230/460/796 OWP404T-50-6-ODP NEWT $6,400 M6 87.4 31.1" 63160 1200 405T 230/460/796 OWP405T-60-6-ODP NEWT $6,500 M6 88.0 33.46" 114775 1200 405T 460/796 OWP405T-75-6-ODP NEWT $8,750 M6 90.0 33.46" 1179

100 1200 444T 460/796 OWP444T-100-6-ODP NEWT $11,299 M6 90.0 39.1" 1478

10


Explosion‐Proof—Performance Data T Frame, TC Frame

Model Number HP

Full Load

RPM Frame

Service

Factor

DE

Bearing

ODE

Bearing

NEMA

Code

FLA

@ 460V FLT Ft‐Lb LRT (%) BDT (%)

Full Load %

Efficiency

Full Load

Power Factor

Weight

(lbs.)

PEXP143T‐1‐4 1 1773 143T 1.15 6205‐ZZ 6205‐ZZ N 1.35 2.96 275 300 85.5 0.785 62

PEXP145T‐1‐6 1 1175 145T 1.15 6205‐ZZ 6205‐ZZ N 1.65 4.5 170 265 82.5 0.66 79

PEXP143T‐1.5‐2 1.5 3511 143T 1.15 6205‐ZZ 6205‐ZZ M 1.85 2.3 175 250 84 0.845 73

PEXP145T‐1.5‐4 1.5 1769 145T 1.15 6205‐ZZ 6205‐ZZ M 1.95 6 250 280 86.5 0.79 88

PEXP182T‐1.5‐6 1.5 1183 182T 1.15 6306‐ZZ 6306‐ZZ M 2.07 6.7 165 250 87.5 0.71 115

PEXP145T‐2‐2 2 3504 145T 1.15 6205‐ZZ 6205‐ZZ L 2.5 3 170 240 85.5 0.86 75

PEXP145T‐2‐4 2 1765 145T 1.15 6205‐ZZ 6205‐ZZ L 2.6 6 235 270 86.5 0.8 88

PEXP184T‐2‐6 2 1183 184T 1.15 6306‐ZZ 6306‐ZZ L 2.8 8.9 160 240 88.5 0.73 130

PEXP182T‐3‐2 3 3528 182T 1.15 6306‐ZZ 6306‐ZZ K 3.5 4.5 160 230 86.5 0.87 115

PEXP182T‐3‐4 3 1773 182T 1.15 6306‐ZZ 6306‐ZZ K 3.8 8.9 215 250 89.5 0.77 130

PEXP213T‐3‐6 3 1182 213T 1.15 6308‐ZZ 6308‐ZZ K 3.95 13.3 155 230 89.5 0.71 238

PEXP184T‐5‐2 5 3543 184T 1.15 6306‐ZZ 6306‐ZZ J 6 7.41 150 215 88.5 0.85 128

PEXP184T‐5‐4 5 1767 184T 1.15 6306‐ZZ 6306‐ZZ J 7 14.9 185 225 89.5 0.81 183

PEXP215T‐5‐6 5 1178 215T 1.15 6308‐ZZ 6308‐ZZ J 7.5 22.3 150 215 89.5 0.75 295

PEXP213T‐7.5‐2 7.5 3539 213T 1.15 6308‐ZZ 6308‐ZZ H 8.3 11.17 140 200 89.5 0.86 253

PEXP213T‐7.5‐4 7.5 1773 213T 1.15 6308‐ZZ 6308‐ZZ H 8.9 22.3 175 215 91.7 0.84 254

PEXP254T‐7.5‐6 7.5 1186 254T 1.15 6309 6309 H 12.5 33.2 150 205 91 0.78 386

PEXP215T‐10‐2 10 3540 215T 1.15 6308‐ZZ 6308‐ZZ H 11.5 14.9 135 200 90.2 0.88 262

PEXP215T‐10‐4 10 1772 215T 1.15 6308‐ZZ 6308‐ZZ H 12.2 29.8 165 200 91.7 0.86 262

PEXP256T‐10‐6 10 1186 256T 1.15 6309 6309 H 12.5 44.3 150 200 91 0.81 384

PEXP254T‐15‐2 15 3538 254T 1.15 6309 6309 G 16.5 22.4 130 200 91 0.86 401

PEXP254T‐15‐4 15 1778 254T 1.15 6309 6309 G 17.5 44.6 160 200 92.4 0.87 403

PEXP284T‐15‐6 15 1189 284T 1.15 6310 6310 G 22.8 66.3 140 200 91.7 0.82 476

PEXP256T‐20‐2 20 3531 256T 1.15 6309 6309 G 22.8 29.9 130 200 91 0.88 434

PEXP256T‐20‐4 20 1777 256T 1.15 6309 6309 G 23 59.5 150 200 93 0.87 428

PEXP286T‐20‐6 20 1179 286T 1.15 6310 6310 G 23.5 89.1 135 200 91.7 0.81 520

PEXP284TS‐25‐2 25 3560 284TS 1.15 6310 6310 G 27.5 63.88 130 200 91.7 0.88 506

PEXP284T‐25‐4 25 1778 284T 1.15 6310 6310 G 27.5 74.3 150 200 93.6 0.85 558

PEXP324T‐25‐6 25 1187 324T 1.15 6312 6312 G 29 110.6 135 200 93 0.83 657

PEXP286TS‐30‐2 30 3560 286TS 1.15 6310 6310 G 32.5 53.3 130 200 91.7 0.89 528

PEXP286T‐30‐4 30 1777 286T 1.15 6310 6310 G 32.5 88.7 150 200 93.6 0.87 580

PEXP326T‐30‐6 30 1187 326T 1.15 6312 6312 G 34.5 132.7 135 200 93 0.83 739

PEXP324TS‐40‐2 40 3571 324TS 1.15 6312 6312 G 44.5 59.2 125 200 92.4 0.88 710

PEXP324T‐40‐4 40 1783 324T 1.15 6312 6312 G 44.5 117.8 140 200 94.1 0.85 734

PEXP364T‐40‐6 40 1188 364T 1.15 6314 6314 G 46 176.8 135 200 94.1 0.83 911

PEXP326TS‐50‐2 50 3573 326TS 1.15 6312 6312 G 54 73.9 120 200 93 0.88 743

PEXP326T‐50‐4 50 1783 326T 1.15 6312 6312 G 55 148.1 140 200 94.5 0.85 763

PEXP365T‐50‐6 50 1188 365T 1.15 6314 6314 G 56.5 221 135 200 94.1 0.83 899

PEXP364TS‐60‐2 60 3573 364TS 1.15 6313 6313 G 65.5 88.7 120 200 93.6 0.88 860

PEXP364T‐60‐4 60 1786 364T 1.15 6314 6314 G 66.5 176 140 200 95 0.85 891

PEXP404T‐60‐6 60 1192 404T 1.15 6316 6314 G 69 264 135 200 94.5 0.83 1188

PEXP365TS‐75‐2 75 3573 365TS 1.15 6313 6313 G 84.5 110.9 105 200 93.6 0.88 946

PEXP365T‐75‐4 75 1786 365T 1.15 6314 6314 G 86.5 220.6 140 200 95.4 0.85 957

PEXP405T‐75‐6 75 1192 405T 1.15 6316 6314 G 84 330 135 200 94.5 0.83 1349

PEXP405TS‐100‐2 100 3579 405TS 1.15 6313 6313 G 108.8 147.6 105 200 94.1 0.89 1393

PEXP405T‐100‐4 100 1790 405T 1.15 6316 6314 G 109.5 293.4 125 200 95.4 0.87 1426

PEXP444T‐100‐6 100 1190 444T 1.15 6318 6314 G 117 441.3 125 200 95 0.84 1642

PEXP444TS‐125‐2 125 3586 444TS 1.15 6314 6314 G 130 184.1 100 200 95 0.89 1638

PEXP444T‐125‐4 125 1789 444T 1.15 6318 6314 G 133 367 110 200 95.4 0.85 1640

PEXP445T‐125‐6 125 1191 445T 1.15 6318 6314 G 135 551.2 120 200 95 0.84 1779

PEXP445TS‐150‐2 150 3585 445TS 1.15 6314 6314 G 160 221 100 200 95 0.87 1830

PEXP445T‐150‐4 150 1789 445T 1.15 6318 6314 G 162.5 440 110 200 95.8 0.86 1898

PEXP447T‐150‐6 150 1191 447T 1.15 NU318 6318 G 166 661.5 120 200 95.8 0.82 2174

PEXP447TS‐200‐2 200 3584 447TS 1.15 6314 6314 G 213.5 294.8 100 200 95.4 0.87 2370

PEXP447T‐200‐4 200 1789 447T 1.15 6318 6314 G 217 587 100 200 96.2 0.85 2348

PEXP449T‐200‐6 200 1191 449T 1.15 NU318 6318 G 227.5 882 120 200 95.8 0.82 2368

PEXP449TS‐250‐2 250 3585 449TS 1.15 6314 6314 G 262 368.4 70 175 95.8 0.87 2370

PEXP449T‐250‐4 250 1788 449T 1.15 6318 6314 G 268 734 80 175 96.2 0.85 2381

11


Oil Well Pump—Performance Data TEFC

Oil Well Pump—Performance Data Open Drip Proof

213T—449T FRAME 1200 RPM

Model Number HP

Full Load

RPM Frame

Service

Factor

DE

Bearing

ODE

Bearing

NEMA

Code

FLA

@ 460V

LRA


Full Load %

Efficiency

Full Load

Power Factor

Weight

(lbs.)

OWP213T‐3‐6 3 1130 213T 1.15 6308‐ZZ 6308‐ZZ K 5.0 32.0 14.0 330 340 79.0 0.74 130

OWP215T‐5‐6 5 1130 215T 1.15 6308‐ZZ 6308‐ZZ J 7.5 46.0 23.3 285 315 83.5 0.75 156

OWP254T‐7.5‐6 7.5 1125 254T 1.15 6309 6309 H 10.8 63.0 34.9 280 295 84.5 0.78 220

OWP256T‐10‐6 10 1130 256T 1.15 6309 6309 H 14.4 81.0 46.5 300 330 85.0 0.77 249

OWP284T‐15‐6 15 1125 284T 1.15 6311 6311 G 20.0 116.0 69.8 280 310 85.5 0.83 341

OWP286T‐20‐6 20 1130 286T 1.15 6311 6311 G 26.5 145.0 93.0 285 310 86.0 0.83 403

OWP324T‐25‐6 25 1120 324T 1.15 6312 6312 G 32.2 182.0 117.3 300 310 86.0 0.85 510

OWP326T‐30‐6 30 1130 326T 1.15 6312 6312 G 38.5 217.0 139.5 300 330 86.5 0.85 572

OWP365T‐40‐6 40 1135 365T 1.15 6313 6313 G 49.0 290.0 185.2 275 290 87.5 0.88 733

OWP404T‐50‐6 50 1140 404T 1.15 NU315 6314 G 61.0 362.0 230.5 275 300 87.5 0.88 911

OWP405T‐60‐6 60 1135 405T 1.15 NU315 6314 G 74.0 435.0 277.8 275 300 88.0 0.87 1001

OWP444T‐75‐6 75 1140 444T 1.15 NU318 6317 G 89.0 542.0 345.7 280 310 90.0 0.88 1258

OWP445T‐100‐6 100 1140 445T 1.15 NU318 6317 G 117.0 725.0 460.0 275 300 90.5 0.88 1390

OWP447T‐125‐6 125 1140 447T 1.15 NU319 6318 G 147.0 907.0 575.0 275 300 92.5 0.88 1850

OWP449T‐150‐6 150 1140 449T 1.15 NU319 6318 G 180.0 1085.0 690.0 275 300 93.2 0.88 1980


Model Number HP

Full Load

RPM Frame

Service

Factor

DE

Bearing

ODE

Bearing

NEMA

Code

FLA

@ 460V

LRA


Full Load %

Efficiency

Full Load

Power Factor

Weight

(lbs.)

OWP215T‐3‐8 3 845 215T 1.15 6308‐ZZ 6308‐ZZ K 5.00 32 19.00 280 290 80.0 0.68 123

OWP254T‐5‐8 5 855 254T 1.15 6309 6309 J 9.00 46 31.50 290 300 81.5 0.65 191

OWP256T‐7.5‐8 7.5 850 256T 1.15 6309 6309 H 12.50 63 47.00 295 300 82.5 0.68 235

OWP284T‐10‐8 10 850 284T 1.15 6311 6311 H 16.50 81 62.00 275 285 84.0 0.68 283

OWP286T‐15‐8 15 855 286T 1.15 6311 6311 G 23.50 116 92.00 290 300 85.5 0.69 337

OWP324T‐20‐8 20 855 324T 1.15 6312 6312 G 31.00 145 123.50 290 310 87.5 0.70 451

OWP326T‐25‐8 25 850 326T 1.15 6312 6312 G 37.50 182 155.00 290 310 87.5 0.71 493

OWP364T‐30‐8 30 855 364T 1.15 6313 6313 G 45.00 217 184.00 280 290 87.5 0.71 629

OWP365T‐40‐8 40 855 365T 1.15 6313 6313 G 58.00 290 246.00 275 285 87.5 0.73 710

OWP404T‐50‐8 50 855 404T 1.15 NU315 6314 G 67.00 362 308.00 275 285 88.5 0.78 895

OWP405T‐60‐8 60 855 405T 1.15 NU315 6314 G 80.00 435 370.00 275 285 89.5 0.78 1025

OWP444T‐75‐8 75 855 444T 1.15 NU318 6317 G 95.50 542 460.00 275 290 91.7 0.80 1328

OWP445T‐100‐8 100 855 445T 1.15 NU318 6317 G 125.0 725 614.00 275 285 91.7 0.82 1614

Model Number HP

Full Load

RPM Frame

Service

Factor

DE

Bearing

ODE

Bearing

NEMA

Code

FLA

@ 460V

LRA


Full Load %

Efficiency

Full Load

Power Factor

Weight

(lbs.)

OWP254T‐7.5‐6‐ODP 7.5 1130 254T 1.15 6309 6309 H 14.5 63 34.7 275 300 78.5 0.64 217

OWP256T‐10‐6‐ODP 10 1140 256T 1.15 6309 6309 H 18 81 46 280 320 81.5 0.65 238

OWP284T‐15‐6‐ODP 15 1120 284T 1.15 6311 6311 G 22 116 70 280 315 82.5 0.8 341

OWP286T‐20‐6‐ODP 20 1130 286T 1.15 6311 6311 G 28 145 93 285 310 85.5 0.8 370

OWP324T‐25‐6‐ODP 25 1125 324T 1.15 6312 6312 G 34 182 116.8 295 310 86.5 0.8 466

OWP326T‐30‐6‐ODP 30 1135 326T 1.15 6312 6312 G 41 217 139 310 330 86.5 0.79 488

OWP365T‐40‐6‐ODP 40 1140 365T 1.15 6313 6313 G 56 290 184.4 275 290 87.5 0.76 660

OWP404T‐50‐6‐ODP 50 1140 404T 1.15 NU318 6314 G 64 362 231.5 275 300 88.5 0.83 878

OWP405T‐60‐6‐ODP 60 1140 405T 1.15 NU318 6314 G 76 435 277 275 300 88.5 0.84 911

OWP405T‐75‐6‐ODP 75 1140 405T 1.15 NU318 6314 G 91.5 542 345.7 300 320 89.5 0.85 963

OWP444T‐100‐6‐ODP 100 1135 444T 1.15 NU319 6318 G 124 725 462 275 300 90.2 0.85 1576


12


Accessories—Motor Slide Base 56—505U FRAME MOTOR SLIDE BASE

CATALOG WEIGHT MULTIPLIER LISTNUMBER (Lbs.) SYMBOL PRICE

NA56 3 M11 $18 NA143 6 M11 $35NA145 7 M11 $35 NA182 10 M11 $48NA184 10 M11 $48 NA213 15 M11 $71NA215 17 M11 $71 NA254 19 M11 $97NA256 20 M11 $97 NA284 24 M11 $109NA286 25 M11 $109 NA324 35 M11 $159NA326 36 M11 $159 NA364 49 M11 $221NA365 50 M11 $221 NA404 66 M11 $271NA405 68 M11 $271 NA444 74 M11 $307NA445 76 M11 $307 NA447 102 M11 $406NA449 105 M11 $406 NA505 137 M11 $630

Standard Features Include: ❶ 56—505U Frame Size in Stock

56—145T Frames are Single‐Adjus ng Screw Type;

182T—505U Frames are Double‐Adjus ng Screw Type

❷ Bases are Provided with Washers

❸ Primed with Oven‐Baked Primer for

Easy Pain ng (Color: Black)

❹ All “D” Bolts (or Motor Moun ng Bolts) are

Welded into Posi on to Prevent Spinning

and Dropping from the Slots

❺ All “D” Bolts (or Motor Moun ng Bolts) are

Fixed to the Exact Foot Pa ern of the Motor

to Aid in Easier Motor Installa on

❻ Three‐Year Warranty

13


Moun ng Dimensions—Motor Slide Base 56—286T FRAME MOTOR SLIDE BASE

324T—505U FRAME MOTOR SLIDE BASE

FRAME # A B C D G F BA T AX AY BOLT AT

56 2 7/8 6 1/2 10 5/8 3 13/16 2 7/16 1 1/2 4 1/2 .078 1 1/8 3/8*4 7/8

143T 3 3/8 7 1/2 10 1/2 3 3/4 2 3/4 2 5 1/2 .119 1 1/8 3/8*4 13/16

145T 3 7/8 8 1/2 10 1/2 3 3/4 2 3/4 2 1/2 6 1/2 .119 1 1/8 3/8*4 13/16

182T 4 1/4 9 1/2 12 3/4 4 1/2 3 3/4 2 1/4 6 1/2 .134 1 1/2 1/2*6 1 1/2

184T 4 3/4 10 1/2 12 3/4 4 1/2 3 3/4 2 3/4 7 1/2 .134 1 1/2 1/2*6 1 1/2

213T 4 3/4 11 15 5 1/4 4 1/4 2 3/4 7 1/2 .164 1 3/4 1/2*6 1 1/2

215T 5 1/2 12 1/2 15 5 1/4 4 1/4 3 1/2 9 .164 1 3/4 1/2*6 1 1/2

254T 6 5/8 15 1/8 17 3/4 6 1/4 5 4 1/8 10 3/4 3/16 2 5/8*6 1 7/16

256T 7 1/2 16 7/8 17 3/4 6 1/4 5 5 12 1/2 3/16 2 5/8*6 1 7/16

284T 7 1/2 16 7/8 19 3/4 7 5 1/2 4 3/4 12 1/2 3/16 2 5/8*6 1 11/16

286T 8 1/4 18 3/8 19 3/4 7 5 1/2 5 1/2 14 3/16 2 5/8*6 1 11/16

FRAME # A B C D F H T AX DI AY BOLT

324T 19 1/4 8 1/2 22 3/4 8 6 1/4 14 3/16 2 1/2 3/4 3/4*9

326T 20 3/4 9 1/4 22 3/4 8 6 1/4 15 1/2 3/16 2 1/2 3/4 3/4*9

364T 20 1/2 9 1/8 25 1/2 9 7 15 1/2 1/4 2 1/2 3/4 3/4*9

365T 21 1/2 9 5/8 25 1/2 9 7 16 1/2 1/4 2 1/2 3/4 3/4*9

404T 22 3/8 9 7/8 28 3/4 10 8 16 1/2 1/4 3 7/8 3/4*11

405T 23 7/8 10 5/8 28 3/4 10 8 18 1/4 3 7/8 3/4*11

444T 24 5/8 11 31 1/4 11 9 19 1/4 1/4 3 7/8 3/4*11

445T 26 5/8 12 31 1/4 11 9 21 1/4 1/4 3 7/8 3/4*11

447T 30 1/8 13 3/4 31 1/4 11 9 24 3/4 5/16 3 7/8 3/4*11

449T 35 1/8 16 1/4 31 1/4 11 9 29 3/4 5/16 3 7/8 3/4*11

505U 30 13 1/2 35 12 1/2 10 22 3/4 5/16 3 1/2 1 7/8*12

14


Explosion Proof—Moun ng Dimensions T Frame

143T—449T FRAME 1200—3600 RPM

Frame A C D 2E 2F1 2F2 G H J O P R S T U V ES AA AB BA N‐W

143T 7 12.6 3.5 5.5 4 5 0.5 0.34 1.4 7.1 6.95 0.771 0.188 N/A 0.875 2 1.41 0.75 6.1 2.25 2.25

145T 7 14.6 3.5 5.5 4 5 0.5 0.34 1.4 7.1 6.95 0.771 0.188 N/A 0.875 2 1.41 0.75 6.1 2.25 2.25

182T 9.5 16.1 4.5 7.5 4.5 5.5 0.6 0.41 2 9.1 8.7 0.986 0.25 1.6 1.125 2.5 1.78 0.75 7.5 2.75 2.75

184T 9.5 17.1 4.5 7.5 4.5 5.5 0.6 0.41 2 9.1 8.7 0.986 0.25 1.6 1.125 2.5 1.78 0.75 7.5 2.75 2.75

213T 11 18.9 5.25 8.5 5.5 7 0.7 0.41 2.4 11.2 11.6 1.201 0.312 1.9 1.375 3.12 2.41 1 9 3.5 3.38

215T 11 20.4 5.25 8.5 5.5 7 0.7 0.41 2.4 11.2 11.6 1.201 0.312 1.9 1.375 3.12 2.41 1 9 3.5 3.38

254T 13 23.2 6.25 10 8.25 10 0.7 0.53 2.75 13.2 12.8 1.416 0.375 2.2 1.625 3.75 2.91 1.25 10.3 4.25 4

256T 13 25 6.25 10 8.25 10 0.7 0.53 2.75 13.2 12.8 1.416 0.375 2.2 1.625 3.75 2.91 1.25 10.3 4.25 4

284T 14 26.6 7 11 9.5 11 0.85 0.53 2.75 14.5 14 1.591 0.5 2.2 1.875 4.38 3.28 1.5 11.3 4.75 4.62

284TS 14 25.2 7 11 9.5 11 0.85 0.53 2.75 14.5 14 1.416 0.375 2.2 1.625 3 1.91 1.5 11.3 4.75 3.25

286T 14 28.1 7 11 9.5 11 0.85 0.53 2.75 14.5 14 1.591 0.5 2.2 1.875 4.38 3.28 1.5 11.3 4.75 4.62

286TS 14 26.7 7 11 9.5 11 0.85 0.53 2.75 14.5 14 1.416 0.375 2.2 1.625 3 1.91 1.5 11.3 4.75 3.25

324T 15.5 29.8 8 12.5 10.5 12 1 0.66 2.75 15.9 15.7 1.845 0.5 2.6 2.125 5 3.91 2 12.3 5.25 5.25

324TS 15.5 28.3 8 12.5 10.5 12 1 0.66 2.75 15.9 15.7 1.591 0.5 2.6 1.875 3.5 2.03 2 12.3 5.25 3.75

326T 15.5 31.3 8 12.5 10.5 12 1 0.66 2.75 15.9 15.7 1.845 0.5 2.6 2.125 5 3.91 2 12.3 5.25 5.25

326TS 15.5 29.8 8 12.5 10.5 12 1 0.66 2.75 15.9 15.7 1.591 0.5 2.6 1.875 3.5 2.03 2 12.3 5.25 3.75

364T 17.1 32.5 9 14 11.25 12.25 1.1 0.66 2.95 18.5 18.4 2.021 0.625 2.6 2.375 5.62 4.28 3 15 5.88 5.88

364TS 17.1 31.4 9 14 11.25 12.25 1.15 0.66 2.95 18.1 17.6 1.591 0.5 2.6 1.875 3.5 2.03 3 14.6 5.88 3.75

365T 17.1 33.5 9 14 11.25 12.25 1.1 0.66 2.95 18.5 18.4 2.021 0.625 2.6 2.375 5.62 4.28 3 15 5.88 5.88

365TS 17.1 31.4 9 14 11.25 12.25 1.15 0.66 2.95 18.1 17.6 1.591 0.5 2.6 1.875 3.5 2.03 3 14.6 5.88 3.75

404T 19.3 38 10 16 12.25 13.75 1.25 0.81 3.15 21.1 21.6 2.45 0.75 2.6 2.875 7 5.65 3 16.6 6.62 7.25

405T 19.3 38 10 16 12.25 13.75 1.25 0.81 3.15 21.1 21.6 2.45 0.75 2.6 2.875 7 5.65 3 16.6 6.62 7.25

405TS 19.3 35 10 16 12.25 13.75 1.18 0.81 3.15 19.8 19.1 1.845 0.5 2.6 2.125 4 2.78 3 15.6 6.62 4.25

444T 21.7 44.3 11 18 14.5 16.5 1.35 0.81 3.35 23 23.4 2.88 0.875 3 3.375 8.25 6.91 3 19.9 7.5 8.5

444TS 21.7 40.6 11 18 14.5 16.5 1.35 0.81 3.35 23 23.4 2.021 0.625 3 2.375 4.5 3.03 3 19.9 7.5 4.75

445T 21.7 44.3 11 18 14.5 16.5 1.35 0.81 3.35 23 23.4 2.88 0.875 3 3.375 8.25 6.91 3 19.9 7.5 8.5

445TS 21.7 40.6 11 18 14.5 16.5 1.35 0.81 3.35 23 23.4 2.021 0.625 3 2.375 4.5 3.03 3 19.9 7.5 4.75

447T 21.7 47.8 11 18 16.5 20 1.35 0.81 3.35 23 23.4 2.88 0.875 3 3.375 8.25 6.91 3 19.9 7.5 8.5

447TS 21.7 44.1 11 18 16.5 20 1.35 0.81 3.35 23 23.4 2.021 0.625 3 2.375 4.5 3.03 3 19.9 7.5 4.75

449T 21.7 52.8 11 18 20 25 1.35 0.81 3.35 23 23.4 2.88 0.875 3 3.375 8.25 6.91 3 19.9 7.5 8.5

449TS 21.7 49.1 11 18 20 25 1.35 0.81 3.35 23 23.4 2.021 0.625 3 2.375 4.5 3.03 3 19.9 7.5 4.75

15

ptjindustrial.com 800.724.2961© 1/18 North American Electric, Inc. Explosion Proof & Oil Well Pump Motor Brochure—2018

Explosion Proof—Moun ng Dimensions TC Frame

Frame AJ AK BA BB BC BD N*BF U AH R ES S

143TC 5.875 4.5 2.25 0.16 0.12 6.5 4*3/8‐16 0.875 2.12 0.771 1.41 0.188

145TC 5.875 4.5 2.25 0.16 0.12 6.5 4*3/8‐16 0.875 2.12 0.771 1.41 0.188

182TC 7.25 8.5 2.75 0.25 0.12 9 4*1/2‐13 1.125 2.62 0.986 1.78 0.25

184TC 7.25 8.5 2.75 0.25 0.12 9 4*1/2‐13 1.125 2.62 0.986 1.78 0.25

213TC 7.25 8.5 3.5 0.25 0.25 9 4*1/2‐13 1.375 3.12 1.201 2.41 0.312

215TC 7.25 8.5 3.5 0.25 0.25 9 4*1/2‐13 1.375 3.12 1.201 2.41 0.312

254TC 7.25 8.5 4.25 0.25 0.25 10 4*1/2‐13 1.625 3.75 1.416 2.91 0.375

256TC 7.25 8.5 4.25 0.25 0.25 10 4*1/2‐13 1.625 3.75 1.416 2.91 0.375

284TC 9 10.5 4.75 0.25 0.25 11.25 4*1/2‐13 1.875 4.38 1.591 3.28 0.5

284TSC 9 10.5 4.75 0.25 0.25 11.25 4*1/2‐13 1.625 3 1.416 1.91 0.375

286TC 9 10.5 4.75 0.25 0.25 11.25 4*1/2‐13 1.875 4.38 1.591 3.28 0.5

286TSC 9 10.5 4.75 0.25 0.25 11.25 4*1/2‐13 1.625 3 1.416 1.91 0.375

324TC 11 12.5 5.25 0.25 0.25 14 4*5/8‐11 2.125 5 1.845 3.91 0.5

324TSC 11 12.5 5.25 0.25 0.25 14 4*5/8‐11 1.875 3.5 1.591 2.03 0.5

326TC 11 12.5 5.25 0.25 0.25 14 4*5/8‐11 2.125 5 1.845 3.91 0.5

326TSC 11 12.5 5.25 0.25 0.25 14 4*5/8‐11 1.875 3.5 1.591 2.03 0.5

364TC 11 12.5 5.88 0.25 0.25 14 8*5/8‐11 2.375 5.62 2.021 4.28 0.625

364TSC 11 12.5 5.88 0.25 0.25 14 8*5/8‐11 1.875 3.5 1.591 2.03 0.5

365TC 11 12.5 5.88 0.25 0.25 14 8*5/8‐11 2.375 5.62 2.021 4.28 0.625

365TSC 11 12.5 5.88 0.25 0.25 14 8*5/8‐11 1.875 3.5 1.591 2.03 0.5

404TC 11 12.5 6.62 0.25 0.25 15.5 8*5/8‐11 2.875 7 2.45 5.65 0.75

405TC 11 12.5 6.62 0.25 0.25 15.5 8*5/8‐11 2.875 7 2.45 5.65 0.75

405TSC 11 12.5 6.62 0.25 0.25 15.5 8*5/8‐11 2.125 4 1.845 2.78 0.5

444TC 14 16 7.5 0.25 0.25 18 8*5/8‐11 3.375 8.25 2.88 6.91 0.875

444TSC 14 16 7.5 0.25 0.25 18 8*5/8‐11 2.375 8.25 2.021 3.03 0.625

445TC 14 16 7.5 0.25 0.25 18 8*5/8‐11 3.375 8.25 2.88 6.91 0.875

445TC 14 16 7.5 0.25 0.25 18 8*5/8‐11 3.375 8.25 2.88 6.91 0.875

445TSC 14 16 7.5 0.25 0.25 18 8*5/8‐11 2.375 4.5 2.021 3.03 0.625

447TC 14 16 7.5 0.25 0.25 18 8*5/8‐11 3.375 8.25 2.88 6.91 0.875

447TSC 14 16 7.5 0.25 0.25 18 8*5/8‐11 2.375 4.5 2.021 3.03 0.625

449TC 14 16 7.5 0.25 0.25 18 8*5/8‐11 3.375 8.25 2.88 6.91 0.875

449TSC 14 16 7.5 0.25 0.25 18 8*5/8‐11 2.375 4.5 2.021 3.03 0.625

143TC—449TC FRAME 1200—3600 RPM

16


Oil Well Pump—Moun ng Dimensions TEFC

Frame A B C D 2E 2F1 2F2 H J O P R S T U ES AA AB BA N‐W

213T 11 7.9 18.9 5.25 8.5 5.5 NA 0.41 2.4 10.5 10.2 1.201 0.312 1.9 1.375 2.41 1 8.3 3.5 3.38

215T 11 9.4 20.4 5.25 8.5 5.5 7 0.41 2.4 10.5 10.2 1.201 0.312 1.9 1.375 2.41 1 8.3 3.5 3.38

254T 13 10.4 23.2 6.25 10 8.25 NA 0.53 2.75 13 12.4 1.416 0.375 2.2 1.625 2.91 1.25 10.1 4.25 4

256T 13 12.2 25 6.25 10 8.25 10 0.53 2.75 13 12.4 1.416 0.375 2.2 1.625 2.91 1.25 10.1 4.25 4

284T 14 11.7 26.6 7 11 9.5 NA 0.53 2.75 14.5 14 1.591 0.5 2.2 1.875 3.28 1.5 11.3 4.75 4.62

286T 14 13.2 28.1 7 11 9.5 11 0.53 2.75 14.5 14 1.591 0.5 2.2 1.875 3.28 1.5 11.3 4.75 4.62

324T 15.5 14.7 29.8 8 12.5 10.5 NA 0.66 2.75 15.9 15.7 1.845 0.5 2.6 2.125 3.91 2 12.3 5.25 5.25

326T 15.5 13.2 31.3 8 12.5 10.5 12 0.66 2.75 15.9 15.7 1.845 0.5 2.6 2.125 3.91 2 12.3 5.25 5.25

365T 17.1 15.4 33.5 9 14 11.25 12.25 0.66 2.95 18.1 17.6 2.021 0.625 2.6 2.375 4.28 3 14.6 5.88 5.88

404T 19.3 16.4 36.5 10 16 12.25 NA 0.81 3.15 19.8 19.1 2.45 0.75 2.6 2.875 5.65 3 15.6 6.62 7.25

405T 19.3 17.9 38 10 16 12.25 13.75 0.81 3.15 19.8 19.1 2.45 0.75 2.6 2.875 5.65 3 15.6 6.62 7.25

444T 21.7 22.9 44.3 11 18 14.5 16.5 0.81 3.35 22.1 21.6 2.88 0.875 3 3.375 6.91 3 19 7.5 8.5

445T 21.7 22.9 44.3 11 18 14.5 16.5 0.81 3.35 22.1 21.6 2.88 0.875 3 3.375 6.91 3 19 7.5 8.5

447T 21.7 26.4 47.8 11 18 16.5 20 0.81 3.35 23 23.4 2.88 0.875 3 3.375 6.91 3 19 7.5 8.5

449T 21.7 31.4 52.8 11 18 20 25 0.81 3.35 23 23.4 2.88 0.875 3 3.375 6.91 3 19.9 7.5 8.5

Frame A B C D 2E 2F1 2F2 H J O P R S T U ES AA AB BA N‐W

215T 11 9.4 20.4 5.25 8.5 5.5 7 0.41 2.4 10.5 10.2 1.201 0.312 1.9 1.375 2.41 1 8.3 3.5 3.38

254T 13 10.4 23.2 6.25 10 8.25 NA 0.53 2.75 13 12.4 1.416 0.375 2.2 1.625 2.91 1.25 10.1 4.25 4

256T 13 12.2 25 6.25 10 8.25 10 0.53 2.75 13 12.4 1.416 0.375 2.2 1.625 2.91 1.25 10.1 4.25 4

284T 14 11.7 26.6 7 11 9.5 NA 0.53 2.75 14.5 14 1.591 0.5 2.2 1.875 3.28 1.5 11.3 4.75 4.62

286T 14 13.2 28.1 7 11 9.5 11 0.53 2.75 14.5 14 1.591 0.5 2.2 1.875 3.28 1.5 11.3 4.75 4.62

324T 15.5 14.7 29.8 8 12.5 10.5 NA 0.66 2.75 15.9 15.7 1.845 0.5 2.6 2.125 3.91 2 12.3 5.25 5.25

326T 15.5 13.2 31.3 8 12.5 10.5 12 0.66 2.75 15.9 15.7 1.845 0.5 2.6 2.125 3.91 2 12.3 5.25 5.25

364T 17.1 14.4 32.5 9 14 11.25 NA 0.66 2.95 18.1 17.6 2.021 0.625 2.6 2.375 4.28 3 14.6 5.88 5.88

365T 17.1 15.4 33.5 9 14 11.25 12.25 0.66 2.95 18.1 17.6 2.021 0.625 2.6 2.375 4.28 3 14.6 5.88 5.88

404T 19.3 16.4 36.5 10 16 12.25 NA 0.81 3.15 19.8 19.1 2.45 0.75 2.6 2.875 5.65 3 15.6 6.62 7.25

405T 19.3 17.9 38 10 16 12.25 13.75 0.81 3.15 19.8 19.1 2.45 0.75 2.6 2.875 5.65 3 15.6 6.62 7.25

444T 21.7 22.9 44.3 11 18 14.5 16.5 0.81 3.35 22.1 21.6 2.88 0.875 3 3.375 6.91 3 19 7.5 8.5

445T 21.7 22.9 44.3 11 18 14.5 16.5 0.81 3.35 22.1 21.6 2.88 0.875 3 3.375 6.91 3 19 7.5 8.5



17


Oil Well Pump—Moun ng Dimensions Open Drip Proof

Frame HP A B C D 2E 2F1 2F2 H J O P R S T U ES AA AB BA N‐W

254T 7.5 11.85 11.65 22.15 6.25 10 8.25 10 0.53 N/A 13 12.9 1.416 0.375 2.2 1.625 2.91 1 1/4 9.4 4.25 4

256T 10 11.85 11.65 22.15 6.25 10 8.25 10 0.53 N/A 13 12.9 1.416 0.375 2.2 1.625 2.91 1 1/4 9.4 4.25 4

284T 15 13 12.8 24.8 7 11 9.5 11 0.53 N/A 14.3 13.95 1.591 0.5 2.2 1.875 3.28 1 1/2 10.1 4.75 4.62

286T 20 13 12.8 24.8 7 11 9.5 11 0.53 N/A 14.3 13.95 1.591 0.5 2.2 1.875 3.28 1 1/2 10.1 4.75 4.62

324T 25 14.6 13.95 27.1 8 12.5 10.5 12 0.66 N/A 16.1 15.35 1.845 0.5 2.6 2.125 3.91 2 11.4 5.25 5.25

326T 30 14.6 13.95 27.1 8 12.5 10.5 12 0.66 N/A 16.1 15.35 1.845 0.5 2.6 2.125 3.91 2 11.4 5.25 5.25

365T 40 17 14.65 29.3 9 14 11.25 12.25 0.66 N/A 18.1 17.2 2.021 0.625 2.6 2.375 4.28 3 12.4 5.88 5.88

404T 50 19.1 17 33.3 10 16 12.25 13.75 0.81 N/A 21 20.25 2.45 0.75 2.6 2.875 5.65 3 14.5 6.62 7.25

405T 60 19.1 17 33.3 10 16 12.25 13.75 0.81 N/A 21 20.25 2.45 0.75 2.6 2.875 5.65 3 14.5 6.62 7.25

405T 75 19.1 17 22.3 10 16 12.25 13.75 0.81 N/A 21 20.25 2.45 0.75 2.6 2.875 5.65 3 14.5 6.62 7.25

444T 100 22.3 20.8 39.5 11 18 14.5 16.5 0.81 N/A 22.6 23.3 2.88 0.875 3 3.375 6.91 3 18.9 7.5 8.5

445T 125 22.3 22.8 39.5 11 18 14.5 16.5 0.81 N/A 22.6 23.3 2.88 0.875 3 3.375 6.91 3 18.9 7.5 8.5

447T 150 22.3 24 43 11 18 16.5 20 0.81 N/A 22.6 23.3 2.88 0.875 3 3.375 6.91 3 18.9 7.5 8.5


18


HAZARDOUS LOCATION CLASSIFICATION

Hazardous Locations consist of areas where there is the potential for a fire or explosion due to electrical equipment that is in operation in this area with a reaction to flammable or ignitable gases, liquids, vapors, combustible dusts, fibers or flyings. The need for Explosion‐Proof equipment then arises due to this potential for fire or explosion.

The National Electrical Code (NEC) along with the National Fire Protection Association (NFPA) and Underwriters Laboratories (UL) have published a guide along with codes that classify hazardous areas into classes, divisions and zones.

The “Combustion” or “Fire” Triangle is used to classify Hazardous Locations in the Explosion‐Proof industry. A source of fuel (explosive gases,liquids, or vapors), source of ignition (fire, spark, or explosion) and oxygen must be present in the appropriate consistencies for an explosion to occur. Our Explosion‐Proof Enclosures & Systems operate to prevent these three criteria from mixing in such a way that would generate an explosion and be hazardous to the surrounding environment.

CLASS I

Class I locations consist of areas where gases, vapors or liquids may exist that have the potential to become flammable or ignitable. There are two different divisions that exist in Class I, Division 1 and Division 2, along with three Zones; Zone 0, 1 & 2. Locations that would be considered to be Class I include Petroleum Refineries, Gasoline Storage Areas, Dry Cleaning Plants, Spray Finishing Areas, Fuel Servicing Areas, etc.

Division 1 is a subset of Class I and is classified as an area where the explosive or flammable gases, vapors or liquids mentioned above can exist under normal, everyday operating conditions.

Division 2 is also a subset of Class I and is classified as an area where the explosive or flammable gases, vapors or liquids mentioned above are not likely to exist during regular operation.

Zone 0 is described as the presence of explosive or flammable gases, vapors or liquids for long periods of time during operating conditions or during a large portion of the operating conditions.

Zone 1 is described as the presence of explosive or flammable gases, vapors or liquids for some of the time during normal operating conditions.

Zone 2 is described as there not being a likelihood of explosive or flammable gases, vapors or liquids present during normal operating conditions.

CLASS II

Class II locations consist of locations where combustible dusts may exist that have the potential to become flammable or ignitable. Locations that would be considered to be Class II include Grain elevators, Flour and feed mills, Metal powder manufacturers, and Coal plants, etc.

Division 1 is a subset of Class II and is classified as an area where the explosive or flammable combustible dusts mentioned above can exist under normal, everyday operating conditions.

Division 2 is also a subset of Class II and is classified as an area where the explosive or flammable combustible dusts mentioned above are not likely to exist during regular operation.

19


CLASSIFICATION OF HAZARDOUS ATMOSPHERES

20


Explosion Proof—Table 1 Hazardous Loca ons

400T—440TC FRAME TEFC, C‐FLANGE

MAX AMB TEMP S F OPER TEMP CODE

55°C 1.15 T3C

General Descrip on: For use of AC electric motors in hazardous loca ons. Suitable for Class I, Division 1, Groups C and D


40°C 1.15 T3C

General Descrip on: For use of AC electric motors in hazardous loca ons. Suitable for Class I, Division 1, Groups C and D;

Class II, Division 1, Groups F and G.


55°C 1.15 T2B

40°C 1.15 T3C

General Descrip on: For use of AC electric motors in hazardous loca ons. Suitable for Class I, Division 1, Groups C and D;

Class II, Division 1, Groups F and G.





21

ptjindustrial.com 800.724.2961© 1/18 North American Electric, Inc. Explosion Proof & Oil Well Pump Motor Brochure—2018

NOTES

22

800.724.2961 © 1/18 North American Electric, Inc. Explosion Proof & Oil Well Pump Motor Brochure—2018

NO‐FAULT WARRANTY POLICY

Motors with frame sizes 215T and smaller are covered under our “No‐Fault Warranty”. The warranty period is 24 months from the date of invoice. This special limited warranty is offered one me per end‐user, per appli‐ca on. If there is more than one failure, please follow our standard limited warranty policy and procedure and contact our warranty department for assistance. For informa on regarding this warranty policy you may contact our customer service department at (800) 884‐0404 or visit our website at www.naemotors.com.

North American Electric’s liability under this warranty or any other warranty, expressed or implied, in law or fact, shall be limited to the replacement of the motor, and in no event shall North American Electric, Inc. be liable for consequen al or indirect damages, including freight.

When filing a claim under our “No Fault Warranty”, you must provide the following documenta on to ensure your claim is processed in a mely manner.

Original nameplate from the failed motor Copy of the original North American Electric, Inc. invoice or the invoice number for the failed motor A brief descrip on of the failure for quality control purposes

Note: Please make a legible photo copy of the nameplate from the failed motor for your records.

STANDARD LIMITED WARRANTY POLICY

General Purpose Cast Iron Motors (TEFC & ODP) 36 months from date of invoice

Crusher Duty Motors 36 months from date of invoice

Close Couple Pump Motors 36 months from date of invoice

Oil Well Pump Motors 36 months from date of invoice

All Rolled Steel Motors, Three‐Phase & Single Phase 24 months from date of invoice

Rotary Phase Converter Motors 24 months from date of invoice

Stainless Steel Motors 24 months from date of invoice

Explosion Proof Motors 24 months from date of invoice

Ver cal Hollow Sha Motors 24 months from date of invoice

Sha Mount Reducers 24 months from date of invoice

Motor Slide Bases 36 months from date of invoice

North American Electric, Inc. shall, at its op on and expense, either repair or replace any such motor or part, which is defec ve within the warranty period. To be covered under warranty, any motor must have at all mes been operated or used under normal opera ng condi ons for which the motor was designed.

In the event of warranty claims, North American Electric, Inc. must be no fied promptly following any motor failure. The motor should be sent to a North American Electric, Inc. authorized service center to diagnose cause of failure. A er this examina on, a determina on will be made if the failure was due to defec ve mate‐rial and/or workmanship. If the failure was due to defec ve material and/or workmanship, North American Electric, Inc. will replace or repair the motor. DO NOT repair any motor without a prior wri en purchase order from North American Electric, Inc.

North American Electric’s liability under this warranty or any other warranty, expressed or implied, in law or fact, shall be limited to the replacement of the motor, and in no event shall North American Electric, Inc. be liable for consequen al or indirect damages, including freight.

ptjindustrial.com

MOTOR WARRANTY POLICY & PROCEDURES

23


CONTINUING EDUCATION

CONTINUING EDUCATION

North American Electric’s con nuing

educa on courses were created with

you in mind to provide informa on,

tools, technical support, and training

to sell, install, and support low voltage

AC drives.

NAE University offers professional,

comprehensive, and educa onal programs

including:

Sales/Product Training Electric Motors Electric Motor Controls

Motor Start Up / Basic Programmingof Low Voltage AC Drives

Maintenance and Troubleshoo ngTraining

Electric Motors Electric Motor Controls

We provide in depth, hands on training at

our headquarters in Hernando, Mississippi.

We also provide on‐site training at your

loca on as well as internet courses and

webinars.

800.724.2961 [email protected]

ptjindustrial.com

P.O. Box 17900 Reno, NV 89511

General Purpose Motors & More

508A Listed Panel Shop

oil explosion well - electricmotorsforless.com

Documents