octal buffers and line drivers with 3-state outputs … · octal buffers and line drivers with...

SN54ALS244C, SN54AS244A, SN74ALS244C, SN74AS244A OCTAL BUFFERS AND LINE DRIVERS

WITH 3-STATE OUTPUTS SDAS142C – JULY 1987 – REVISED AUGUST 1995

Copyright 1995, Texas Instruments Incorporated

1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

• 3-State Outputs Drive Bus Lines or BufferMemory Address Registers

• pnp Inputs Reduce dc Loading

• Package Options Include PlasticSmall-Outline (DW) Packages, CeramicChip Carriers (FK), and Standard Plastic (N)and Ceramic (J) 300-mil DIPs

description

These octal buffers and line drivers are designedspecifically to improve the performance anddensity of 3-state memory address drivers, clockdrivers, and bus-oriented receivers andtransmitters. With the ′ALS240A, ′ALS241C,′AS240A, and ′AS241A, these devices provide thechoice of selected combinations of invertingoutputs, symmetrical active-low output-enable(OE) inputs, and complementary OE and OEinputs.

The -1 version of SN74ALS244C is identical to thestandard version, except that the recommendedmaximum IOL for the -1 version is 48 mA. There isno -1 version of the SN54ALS244C.

The SN54ALS244C and SN54AS244A arecharacterized for operation over the full militarytemperature range of –55°C to 125°C. TheSN74ALS244C and SN74AS244A arecharacterized for operation from 0°C to 70°C.

FUNCTION TABLE(each buffer)

INPUTS OUTPUTOE A Y

L H H

L L L

H X Z

1

2

3

4

5

6

7

8

9

10

20

19

18

17

16

15

14

13

12

11

1OE1A12Y41A22Y31A32Y21A42Y1

GND

VCC2OE1Y12A41Y22A31Y32A21Y42A1

SN54ALS244C, SN54AS244A . . . J PACKAGESN74ALS244C, SN74AS244A . . . DW OR N PACKAGE

(TOP VIEW)

3 2 1 20 19

9 10 11 12 13

4

5

6

7

8

18

17

16

15

14

1Y12A41Y22A31Y3

1A22Y31A32Y21A4

SN54ALS244C, SN54AS244A . . . FK PACKAGE(TOP VIEW)

2Y4

1A1

1OE

1Y4

2A2

2OE

2Y1

GN

D2A

1V C

C

PRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.

SN54ALS244C, SN54AS244A, SN74ALS244C, SN74AS244AOCTAL BUFFERS AND LINE DRIVERSWITH 3-STATE OUTPUTSSDAS142C – JULY 1987 – REVISED AUGUST 1995

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

logic symbol † logic diagram (positive logic)

1

2

4

6

8

19

11

13

15

17 3

5

7

9

12

14

16

181A1

1A2

1A3

1A4

1Y1

2A1

2A2

2A3

2A4

2Y1

1Y2

1Y3

1Y4

2Y2

2Y3

2Y4

2OE

1OE

21A1

41A2

61A3

81A4

EN1

1Y118

1Y216

1Y314

1Y412

112A1

132A2

152A3

172A4

EN19

2Y19

2Y27

2Y35

2Y43

1OE

2OE

† This symbol is in accordance with ANSI/IEEE Std 91-1984 andIEC Publication 617-12.

absolute maximum ratings over operating free-air temperature range (unless otherwise noted) ‡

Supply voltage, VCC 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input voltage, VI 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Voltage applied to a disabled 3-state output 5.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating free-air temperature range, TA: SN54ALS244C –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . .

SN74ALS244C 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Storage temperature range –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, andfunctional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is notimplied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.




recommended operating conditions

SN54ALS244C SN74ALS244CUNIT

MIN NOM MAX MIN NOM MAXUNIT

VCC Supply voltage 4.5 5 5.5 4.5 5 5.5 V

VIH High-level input voltage 2 2 V

VIL Low level input voltage0.8† 0.8

VVIL Low-level input voltage0.7‡

V

IOH High-level output current –12 –15 mA

IOL Low level output current12 24

mAIOL Low-level output current48§

mA

TA Operating free-air temperature –55 125 0 70 °C† Applies over temperature range –55°C to 70°C‡ Applies over temperature range 70°C to 125°C§ Applies only to the -1 version and only if VCC is between 4.75 V and 5.25 V

electrical characteristics over recommended operating free-air temperature range (unlessotherwise noted)

PARAMETER TEST CONDITIONSSN54ALS244C SN74ALS244C

UNITPARAMETER TEST CONDITIONSMIN TYP¶ MAX MIN TYP¶ MAX

UNIT

VIK VCC = 4.5 V, II = –18 mA –1.5 –1.5 V

VCC = 4 5 V to 5 5 VIOH = –0.4 mA VCC –2 VCC –2

VOH

VCC = 4.5 V to 5.5 VIOH = –3 mA 2.4 3.2 2.4 3.2

VVOHVCC = 4 5 V

IOH = –12 mA 2V

VCC = 4.5 VIOH = –15 mA 2

IOL = 12 mA 0.25 0.4 0.25 0.4

VOL VCC = 4.5 V IOL = 24 mA 0.35 0.5 V

IOL = 48 mA (-1 version) 0.35 0.5

IOZH VCC = 5.5 V, VO = 2.7 V 20 20 µA

IOZL VCC = 5.5 V, VO = 0.4 V –20 –20 µA

II VCC = 5.5 V, VI = 7 V 0.1 0.1 mA

IIH VCC = 5.5 V, VI = 2.7 V 20 20 µA

IIL VCC = 5.5 V, VI = 0.4 V –0.1 –0.1 mA

IO# VCC = 5.5 V, VO = 2.25 V –20 –112 –30 –112 mA

Outputs high 9 18 9 17

ICC VCC = 5.5 V Outputs low 15 25 15 24 mA

Outputs disabled 17 29 17 27

¶ All typical values are at VCC = 5 V, TA = 25°C.# The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.



switching characteristics (see Figure 1)

PARAMETERFROM

(INPUT)TO

(OUTPUT)

VCC = 4.5 V to 5.5 V,CL = 50 pF,R1 = 500 Ω,R2 = 500 Ω,TA = MIN to MAX † UNIT

SN54ALS244C SN74ALS244C

MIN MAX MIN MAX

tPLHA Y

1 16 2 10ns

tPHLA Y

3 12 3 10ns

tPZHOE Y

1 26 3 20ns

tPZLOE Y

1 24 3 20ns

tPHZOE Y

2 10 2 10ns

tPLZOE Y

1 26 1 13ns

† For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.

absolute maximum ratings over operating free-air temperature range (unless otherwise noted) ‡

Supply voltage, VCC 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input voltage, VI 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Voltage applied to a disabled 3-state output 5.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating free-air temperature range, TA: SN54AS244A –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SN74AS244A 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Storage temperature range –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, andfunctional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is notimplied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

recommended operating conditions

SN54AS244A SN74AS244AUNIT

MIN NOM MAX MIN NOM MAXUNIT

VCC Supply voltage 4.5 5 5.5 4.5 5 5.5 V

VIH High-level input voltage 2 2 V

VIL Low-level input voltage 0.8 0.8 V

IOH High-level output current –12 –15 mA

IOL Low-level output current 48 64 mA

TA Operating free-air temperature –55 125 0 70 °C




electrical characteristics over recommended operating free-air temperature range (unlessotherwise noted)

PARAMETER TEST CONDITIONSSN54AS244A SN74AS244A

UNITPARAMETER TEST CONDITIONSMIN TYP† MAX MIN TYP† MAX

UNIT

VIK VCC = 4.5 V, II = –18 mA –1.2 –1.2 V

VCC = 4.5 V to 5.5 V, IOH = –2 mA VCC –2 VCC –2

VOHIOH = –3 mA 2.4 3.4 2.4 3.4

VVOHVCC = 4.5 V IOH = –12 mA 2.4

V

IOH = –15 mA 2.4

VOL VCC = 4 5 VIOL = 48 mA 0.55

VVOL VCC = 4.5 VIOL = 64 mA 0.55

V

IOZH VCC = 5.5 V, VO = 2.7 V 50 50 µA

IOZL VCC = 5.5 V, VO = 0.4 V –50 –50 µA

II VCC = 5.5 V, VI = 7 V 0.1 0.1 mA

IIH VCC = 5.5 V, VI = 2.7 V 20 20 µA

IILOE

VCC = 5 5 V VI = 0 4 V–0.5 –0.5

mAIILA

VCC = 5.5 V, VI = 0.4 V–1 –1

mA

IO‡ VCC = 5.5 V, VO = 2.25 V –50 –150 –50 –150 mA

Outputs high 22 34 22 34

ICC VCC = 5.5 V Outputs low 60 90 60 90 mA

Outputs disabled 34 54 34 54† All typical values are at VCC = 5 V, TA = 25°C.‡ The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.

switching characteristics (see Figure 1)

PARAMETERFROM

(INPUT)TO

(OUTPUT)

VCC = 4.5 V to 5.5 V,CL = 50 pF,R1 = 500 Ω,R2 = 500 Ω,TA = MIN to MAX § UNIT

SN54AS244A SN74AS244A

MIN MAX MIN MAX

tPLHA Y

2 9 2 6.2ns

tPHLA Y

1 7 1 6.2ns

tPZHOE Y

1 10 1 9ns

tPZLOE Y

2 8 2 7.5ns

tPHZOE Y

1 6.5 1 6ns

tPLZOE Y

1 10.5 1 9ns

§ For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.



PARAMETER MEASUREMENT INFORMATIONSERIES 54ALS/74ALS AND 54AS/74AS DEVICES

tPHZ

tPLZ

tPHLtPLH

0.3 V

tPZL

tPZH

tPLHtPHL

LOAD CIRCUITFOR 3-STATE OUTPUTS

From OutputUnder Test

Test Point

R1

S1

CL(see Note A)

7 V

1.3 V

1.3 V1.3 V

3.5 V

3.5 V

0.3 V

0.3 V

thtsu

VOLTAGE WAVEFORMSSETUP AND HOLD TIMES

TimingInput

DataInput

1.3 V 1.3 V3.5 V

3.5 V

0.3 V

0.3 V

High-LevelPulse

Low-LevelPulse

tw

VOLTAGE WAVEFORMSPULSE DURATIONS

Input

Out-of-PhaseOutput

(see Note C)

1.3 V 1.3 V

1.3 V1.3 V

1.3 V 1.3 V

1.3 V1.3 V

1.3 V

1.3 V

3.5 V

3.5 V

0.3 V

0.3 V

VOL

VOH

VOH

VOL

OutputControl

(low-levelenabling)

Waveform 1S1 Closed

(see Note B)

Waveform 2S1 Open

(see Note B)0 V

VOH

VOL

3.5 V

In-PhaseOutput

0.3 V

1.3 V 1.3 V

VOLTAGE WAVEFORMSPROPAGATION DELAY TIMES

VOLTAGE WAVEFORMSENABLE AND DISABLE TIMES, 3-STATE OUTPUTS

R2

VCC

RL

Test Point


CL(see Note A)

LOAD CIRCUITFOR OPEN-COLLECTOR OUTPUTS

LOAD CIRCUIT FOR BI-STATE

TOTEM-POLE OUTPUTS


Test Point

CL(see Note A)

RL

RL = R1 = R2

NOTES: A. CL includes probe and jig capacitance.B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.

Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.C. When measuring propagation delay items of 3-state outputs, switch S1 is open.D. All input pulses have the following characteristics: PRR ≤ 1 MHz, tr = tf = 2 ns, duty cycle = 50%.E. The outputs are measured one at a time with one transition per measurement.

Figure 1. Load Circuits and Voltage Waveforms

PACKAGE OPTION ADDENDUM

www.ti.com 24-Aug-2018

Addendum-Page 1

PACKAGING INFORMATION

Orderable Device Status(1)

Package Type PackageDrawing

Pins PackageQty

Eco Plan(2)

Lead/Ball Finish(6)

MSL Peak Temp(3)

Op Temp (°C) Device Marking(4/5)

Samples

5962-86839012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962-86839012ASNJ54ALS244CFK

5962-8683901RA ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8683901RASNJ54ALS244CJ

5962-8683901SA ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8683901SASNJ54ALS244CW

5962-8683901VRA ACTIVE CDIP J 20 20 TBD A42 N / A for Pkg Type -55 to 125 5962-8683901VRASNV54ALS244CJ

5962-8683901VSA ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8683901VSASNV54ALS244CW

5962-9755901QRA ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9755901QRASNJ54AS244AJ

JM38510/38303B2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 JM38510/38303B2A

JM38510/38303BRA ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510/38303BRA

M38510/38303B2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 JM38510/38303B2A

M38510/38303BRA ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510/38303BRA

SN54ALS244CJ ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 SN54ALS244CJ

SN54AS244AJ ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 SN54AS244AJ

SN74ALS244C-1DW ACTIVE SOIC DW 20 25 Green (RoHS& no Sb/Br)

CU NIPDAU Level-1-260C-UNLIM 0 to 70 ALS244C-1

SN74ALS244C-1DWR ACTIVE SOIC DW 20 2000 Green (RoHS& no Sb/Br)


SN74ALS244C-1N ACTIVE PDIP N 20 20 Pb-Free(RoHS)

CU NIPDAU N / A for Pkg Type 0 to 70 SN74ALS244C-1N

http://www.ti.com/product/SN54ALS244C?CMP=conv-poasamples#samplebuy



http://www.ti.com/product/SN54ALS244C-SP?CMP=conv-poasamples#samplebuy

http://www.ti.com/product/SN54ALS244C-SP?CMP=conv-poasamples#samplebuy

http://www.ti.com/product/SN54AS244A?CMP=conv-poasamples#samplebuy







http://www.ti.com/product/SN74ALS244C-1?CMP=conv-poasamples#samplebuy





Addendum-Page 2

Orderable Device Status(1)

Package Type PackageDrawing

Pins PackageQty

Eco Plan(2)

Lead/Ball Finish(6)

MSL Peak Temp(3)

Op Temp (°C) Device Marking(4/5)

Samples

SN74ALS244C-1NSR ACTIVE SO NS 20 2000 Green (RoHS& no Sb/Br)


SN74ALS244CDBR ACTIVE SSOP DB 20 2000 Green (RoHS& no Sb/Br)

CU NIPDAU Level-1-260C-UNLIM 0 to 70 G244C

SN74ALS244CDBRG4 ACTIVE SSOP DB 20 2000 Green (RoHS& no Sb/Br)

CU NIPDAU Level-1-260C-UNLIM 0 to 70 G244C

SN74ALS244CDW ACTIVE SOIC DW 20 25 Green (RoHS& no Sb/Br)

CU NIPDAU Level-1-260C-UNLIM 0 to 70 ALS244C

SN74ALS244CDWR ACTIVE SOIC DW 20 2000 Green (RoHS& no Sb/Br)


SN74ALS244CN ACTIVE PDIP N 20 20 Pb-Free(RoHS)

CU NIPDAU N / A for Pkg Type 0 to 70 SN74ALS244CN

SN74ALS244CNSR ACTIVE SO NS 20 2000 Green (RoHS& no Sb/Br)


SN74AS244ADW ACTIVE SOIC DW 20 25 Green (RoHS& no Sb/Br)

CU NIPDAU Level-1-260C-UNLIM 0 to 70 AS244A

SN74AS244ADWR ACTIVE SOIC DW 20 2000 Green (RoHS& no Sb/Br)

CU NIPDAU Level-1-260C-UNLIM 0 to 70 AS244A

SN74AS244AN ACTIVE PDIP N 20 20 Pb-Free(RoHS)

CU NIPDAU N / A for Pkg Type 0 to 70 SN74AS244AN

SN74AS244ANE4 ACTIVE PDIP N 20 20 Pb-Free(RoHS)

CU NIPDAU N / A for Pkg Type 0 to 70 SN74AS244AN

SN74AS244ANSR ACTIVE SO NS 20 2000 Green (RoHS& no Sb/Br)

CU NIPDAU Level-1-260C-UNLIM 0 to 70 74AS244A

SNJ54ALS244CFK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962-86839012ASNJ54ALS244CFK

SNJ54ALS244CJ ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8683901RASNJ54ALS244CJ

SNJ54ALS244CW ACTIVE CFP W 20 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8683901SASNJ54ALS244CW

SNJ54AS244AJ ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9755901QRASNJ54AS244AJ

(1) The marketing status values are defined as follows:



















Addendum-Page 3

ACTIVE: Product device recommended for new designs.LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.PREVIEW: Device has been announced but is not in production. Samples may or may not be available.OBSOLETE: TI has discontinued the production of the device.

(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substancedo not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI mayreference these types of products as "Pb-Free".RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide basedflame retardants must also meet the <=1000ppm threshold requirement.

(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.

(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuationof the previous line and the two combined represent the entire Device Marking for that device.

(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finishvalue exceeds the maximum column width.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on informationprovided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken andcontinues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

OTHER QUALIFIED VERSIONS OF SN54ALS244C, SN54ALS244C-SP, SN54AS244A, SN74ALS244C, SN74AS244A :

• Catalog: SN74ALS244C, SN54ALS244C, SN74AS244A

• Military: SN54ALS244C, SN54AS244A

• Space: SN54ALS244C-SP

NOTE: Qualified Version Definitions:

http://focus.ti.com/docs/prod/folders/print/sn74als244c.html


http://focus.ti.com/docs/prod/folders/print/sn74as244a.html


http://focus.ti.com/docs/prod/folders/print/sn54as244a.html

http://focus.ti.com/docs/prod/folders/print/sn54als244c-sp.html



Addendum-Page 4

• Catalog - TI's standard catalog product

• Military - QML certified for Military and Defense Applications

• Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application

TAPE AND REEL INFORMATION

*All dimensions are nominal

Device PackageType

PackageDrawing

Pins SPQ ReelDiameter

(mm)

ReelWidth

W1 (mm)

A0(mm)

B0(mm)

K0(mm)

P1(mm)

W(mm)

Pin1Quadrant

SN74ALS244C-1DWR SOIC DW 20 2000 330.0 24.4 10.8 13.3 2.7 12.0 24.0 Q1

SN74ALS244C-1NSR SO NS 20 2000 330.0 24.4 8.4 13.0 2.5 12.0 24.0 Q1

SN74ALS244CDBR SSOP DB 20 2000 330.0 16.4 8.2 7.5 2.5 12.0 16.0 Q1

SN74ALS244CDWR SOIC DW 20 2000 330.0 24.4 10.8 13.3 2.7 12.0 24.0 Q1

SN74ALS244CNSR SO NS 20 2000 330.0 24.4 8.4 13.0 2.5 12.0 24.0 Q1

SN74AS244ADWR SOIC DW 20 2000 330.0 24.4 10.8 13.3 2.7 12.0 24.0 Q1

SN74AS244ANSR SO NS 20 2000 330.0 24.4 8.4 13.0 2.5 12.0 24.0 Q1

PACKAGE MATERIALS INFORMATION

www.ti.com 6-May-2017

Pack Materials-Page 1

*All dimensions are nominal

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)

SN74ALS244C-1DWR SOIC DW 20 2000 367.0 367.0 45.0

SN74ALS244C-1NSR SO NS 20 2000 367.0 367.0 45.0

SN74ALS244CDBR SSOP DB 20 2000 367.0 367.0 38.0

SN74ALS244CDWR SOIC DW 20 2000 367.0 367.0 45.0

SN74ALS244CNSR SO NS 20 2000 367.0 367.0 45.0

SN74AS244ADWR SOIC DW 20 2000 367.0 367.0 45.0

SN74AS244ANSR SO NS 20 2000 367.0 367.0 45.0

PACKAGE MATERIALS INFORMATION

www.ti.com 6-May-2017

Pack Materials-Page 2

www.ti.com

PACKAGE OUTLINE

C

TYP10.639.97

2.65 MAX

18X 1.27

20X 0.510.31

2X11.43

TYP0.330.10

0 - 80.30.1

0.25GAGE PLANE

1.270.40

A

NOTE 3

13.012.6

B 7.67.4

4220724/A 05/2016

SOIC - 2.65 mm max heightDW0020ASOIC

NOTES: 1. All linear dimensions are in millimeters. Dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed 0.15 mm per side. 4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.43 mm per side.5. Reference JEDEC registration MS-013.

120

0.25 C A B

1110

PIN 1 IDAREA

NOTE 4

SEATING PLANE

0.1 C

SEE DETAIL A

DETAIL ATYPICAL

SCALE 1.200

www.ti.com

EXAMPLE BOARD LAYOUT

(9.3)

0.07 MAXALL AROUND

0.07 MINALL AROUND

20X (2)

20X (0.6)

18X (1.27)

(R )TYP

0.05

4220724/A 05/2016


SYMM

SYMM

LAND PATTERN EXAMPLESCALE:6X

1

10 11

20

NOTES: (continued) 6. Publication IPC-7351 may have alternate designs. 7. Solder mask tolerances between and around signal pads can vary based on board fabrication site.

METALSOLDER MASKOPENING

NON SOLDER MASKDEFINED

SOLDER MASK DETAILS

SOLDER MASKOPENING

METAL UNDERSOLDER MASK

SOLDER MASKDEFINED

www.ti.com

EXAMPLE STENCIL DESIGN

(9.3)

18X (1.27)

20X (0.6)

20X (2)

4220724/A 05/2016


NOTES: (continued) 8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 9. Board assembly site may have different recommendations for stencil design.

SYMM

SYMM

1

10 11

20

SOLDER PASTE EXAMPLEBASED ON 0.125 mm THICK STENCIL

SCALE:6X

MECHANICAL DATA

MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE

4040065 /E 12/01

28 PINS SHOWN

Gage Plane

8,207,40

0,550,95

0,25

38

12,90

12,30

28

10,50

24

8,50

Seating Plane

9,907,90

30

10,50

9,90

0,38

5,605,00

15

0,22

14

A

28

1

2016

6,506,50

14

0,05 MIN

5,905,90

DIM

A MAX

A MIN

PINS **

2,00 MAX

6,90

7,50

0,65 M0,15

0°–8°

0,10

0,090,25

NOTES: A. All linear dimensions are in millimeters.B. This drawing is subject to change without notice.C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.D. Falls within JEDEC MO-150

IMPORTANT NOTICE

Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to itssemiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyersshould obtain the latest relevant information before placing orders and should verify that such information is current and complete.TI’s published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integratedcircuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products andservices.Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and isaccompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduceddocumentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statementsdifferent from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for theassociated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.Buyers and others who are developing systems that incorporate TI products (collectively, “Designers”) understand and agree that Designersremain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers havefull and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI productsused in or for Designers’ applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, withrespect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerousconsequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm andtake appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer willthoroughly test such applications and the functionality of such TI products as used in such applications.TI’s provision of technical, application or other design advice, quality characterization, reliability data or other services or information,including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended toassist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in anyway, Designer (individually or, if Designer is acting on behalf of a company, Designer’s company) agrees to use any particular TI Resourcesolely for this purpose and subject to the terms of this Notice.TI’s provision of TI Resources does not expand or otherwise alter TI’s applicable published warranties or warranty disclaimers for TIproducts, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections,enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specificallydescribed in the published documentation for a particular TI Resource.Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications thatinclude the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISETO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTYRIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, orother intellectual property right relating to any combination, machine, or process in which TI products or services are used. Informationregarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty orendorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of thethird party, or a license from TI under the patents or other intellectual property of TI.TI RESOURCES ARE PROVIDED “AS IS” AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES ORREPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TOACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUALPROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM,INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OFPRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL,DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES INCONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEENADVISED OF THE POSSIBILITY OF SUCH DAMAGES.Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements.Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, suchproducts are intended to help enable customers to design and create their own applications that meet applicable functional safety standardsand requirements. Using products in an application does not by itself establish any safety features in the application. Designers mustensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products inlife-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use.Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., lifesupport, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, allmedical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S.TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product).Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applicationsand that proper product selection is at Designers’ own risk. Designers are solely responsible for compliance with all legal and regulatoryrequirements in connection with such selection.Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer’s non-compliance with the terms and provisions of this Notice.

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265Copyright © 2018, Texas Instruments Incorporated

http://www.ti.com/sc/docs/stdterms.htm

octal buffers and line drivers with 3-state outputs … · octal buffers and line drivers with...

Documents