oceanic systems catalogue 2020
TRANSCRIPT
CATALOGUE2020
Oceanic Systems
W H O W E A R E
Oceanic Systems (UK) Ltd design and manufacture world-class
marine systems for control and monitoring vessels. Their product
range includes fuel and water senders, level gauges, NMEA2000®
cabling and connectors, dual and multiple engine displays and
their newest launch, Poseidon.
These NMEA2000® control and monitoring products provide
a modular and flexible solution for users to incorporate their
functions and capabilities in an economical, easy to install and
reliable form.
The NMEA2000® system allows sensors and other devices to
share their information over a single network, with the flexibility
to install additional devices as required.
The products are designed and manufactured in the United
Kingdom and are sold and supported worldwide. The products are
proven to be rugged, robust, and very reliable.
CONTENTS
1 INTRODUCING POSEIDON®
2 THE POSEIDON® SYSTEM UNIT
4 POSEIDON® WIRING DIAGRAM
5 POSEIDON® DISPLAYS
9 NAVIGATION LIGHT CONTROLLER
11 CCTV CAMERAS
12 SIGNALLING
13 POSEIDON® 7 / 10
15 MULTIPLE ENGINE DISPLAYS
17 TANK MANAGEMENT
19 DECK GAUGES
21 SUBMERSIBLE HYDROSTATIC SENDERS
22 SIDE MOUNT HYDROSTATIC SENDERS
23 ADAPTORS
27 AC MONITORING
28 DC MONITORING
29 TEMPERATURE MONITORING
31 PRESSURE MONITORING
32 AIRFLOW MONITORING
33 INPUT AND OUTPUT MODULES
35 CABLES & CONNECTORS
INTRODUCING POSEIDON®
1 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
The mos t a dvanced Alarm , Monitoring an d Control
Sys tem yet .
Poseidon is designed with ease of installation in mind. It requires minimum cabling to speed installation and reduce
the weight and complexity of this system.
Poseidon has a configurable, clean, and modern graphics library with the ability to upload images, view CCTV camera
windows, customise floor plans and more.
The wide array of Poseidon’s options unite style and function, constantly evolving to meet the
user’s requirements.
THE POS EIDON ® S YS TEM UNIT
PLC
Alarm EthernetPLCStandard
USB MicroPlug
RemoteConnectivity
LocalDisplays
Poseidon® System Unit5180PART NUMBER
NMEA2000®
Standard
NMEA2000
+ 44 (0) 1425 610022 │ www.osukl.com │ 2
Poseidon Includes the ‘Network Data Analyser’for system trouble shooting
Configurable Displays
Poseidon® is extremely powerful when it comes to choosing what data to display. Choose from a vast library of widgets to connect to any sensor on-board and tailor it for range, alarms, description and style.
Add, re-name, arrange and delete multiple pages.
Import deck plans, schematics, images and backgrounds for total flexibility of function and style.
3 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
D esign e d for a quick an d eas y set up, Poseidon is f un c tional up on ins tallation .
+ 44 (0) 1425 610022 │ www.osukl.com │ 4
System Overview &Wir ing Diagram
P O S E I D O N ®
IP 67 HDHDMI
IP67 HDMITouchScreen
HD LocalDisplays
10.1” Primary display
Dimensions: 262mm x 186mmResolution: 1280 x 800 WXGABrightness: 1000 Cd/m2 sunlight readableProjected Capacitive Touch
15.6” Primary display
Dimensions: 398mm x 252mmResolution: 1920 x 1080 FHDBrightness: 1000 Cd/m2 sunlight readableProjected Capacitive Touch
5010 5015
A l l Poseidon ® displays have capacit ive touch, are sunl ight
readable , and have outstanding br ightness and contrast .
PART NUMBER PART NUMBER
21.5”19”15.6”10.1”
P O S E I D O N ® P R I M A R Y D I S P L AY S
5 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
H D MI c able up to 5 m etre s from Poseidon ® Sys tem Unit
19“ Primary display
Dimensions: 424mm x 362mmResolution: 1280 x 1024 HDBrightness: 1000 Cd/m2 sunlight readableProjected Capacitive Touch
21.5” Primary display
Dimensions: 516mm x 334mmResolution: 1920 x 1080 FHDBrightness: 1000 Cd/m2 sunlight readableProjected Capacitive Touch
5019 5021PART NUMBER PART NUMBER
+ 44 (0) 1425 610022 │ www.osukl.com │ 6
15.6“ Secondary display
Dimensions: 398mm x 252mmResolution: 1920 x 1080 FHDBrightness: 1000 Cd/m2 Sunlight ReadableProjected Capacitive Touch
5115PART NUMBER
10.1“ Secondary display
Dimensions: 262mm x 186mmResolution: 1280 x 800 WXGABrightness: 1000 Cd/m2 Sunlight ReadableProjected Capacitive Touch
5110PART NUMBER
21.5”19”15.6”10.1”
A l l Poseidon ® displays have
capacit ive touch, are sunl ight
readable , and have outstanding
br ightness and contrast .
P O S E I D O N ® S E C O N DA R Y D I S P L AY S
IP 67 HDHDMI
IP67 HDMITouchScreen
HD LocalDisplays
7 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
19“ Secondary display
Dimensions: 424mm x 362mmResolution: 1280 x 1024 HDBrightness: 1000 Cd/m2 Sunlight ReadableProjected Capacitive Touch
5119PART NUMBER
21.5“ Secondary display
Dimensions: 516mm x 334mmResolution: 1920 x 1080 FHDBrightness: 1000 Cd/m2 Sunlight ReadableProjected Capacitive Touch
5121PART NUMBER
+ 44 (0) 1425 610022 │ www.osukl.com │ 8
Connected VIA Cat 5 Ethernet cable from Poseidon® System Unit
Navigation Light Controller
Oceanic Systems 5971 Navigation Light Controller and the 5972 8 channel expansion modules offers full control and monitoring of LED navigation lights over a standard NMEA2000® network.
The units are designed to control and monitor up to 24 LED Navigation Lights with full monitoring of LED and wiring integrity so that any failures are detected and indicated. There is a single current calibration button that allows the installer to calibrate the unit to each LED circuit so that partial LED failures or wiring failures are detected. In addition, the unit tracks LED power on hours and warns when the LED has reached its useful life and needs to be replaced to maintain safe navigation light visible distances.
Each circuit has a manual override on or off and a self resetting safety fuse. The units are standard DIN rail mounted and have WAGO style cage clamp connections.
5971PART NUMBER
P O S E I D O N ® N AV I G AT I O NL I G H T C O N T RO L L E R
8 channel expansion module
Expand the 5971 Navigation Light Controller from 8 channels to 16 or up to 24 by adding 1 or 2 5972 8 channel expansion modules.
5972PART NUMBER
9 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
+ 44 (0) 1425 610022 │ www.osukl.com │ 10
HDHD
CCTV Cameras
Resolution 2 Mega Pixels3mm wide view lens30m IR distanceLow light ultra high sensitivityWhite Body
CCTV Cameras
Resolution 2 Mega Pixels3mm wide view lens30m IR distanceLow light ultra high sensitivityGrey Body
Poseidon® Ethernet Switch for cameras
Poseidon® Ethernet Switch for Secondary Displays and PLC connections
Poseidon® WiFi Router for remote displays and Cloud access
5350 5351
5360 5361 5362
Poseidon® allows up to 8 fixed focus cameras or pan, tilt, and zoom
cameras to be displayed on any screen.
The cameras can be controlled by simple
touch gestures on display windows.
Poseidon ® is compatible
with th e Flir ® c am era
range .
PART NUMBER PART NUMBER
PART NUMBER PART NUMBER PART NUMBER
P O S E I D O N ® C C T V C A M E R A S
SWITCHES AND ROUTERS
LowLight
Pan/Tilt Zoom
HDHD Low
Light Pan/Tilt Zoom
11 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
S I G N A L L I N G
Whistle Operating Module
Provides fully automatic control of the ship’s whistles and warning lights that can be activated by any Poseidon display.
The unit includes automated general signalling for manoeuvring to Starboard, Port, Astern and Danger signals to IMO Rule 34. It also carries reduced visibility signalling for power vessel, power vessel stopped, anchored, towed or not under command to IMO Rule 35 with variable repeat times as required. It also includes an immediate horn control directly from any touchscreen on the vessel.
5980PART NUMBER
+ 44 (0) 1425 610022 │ www.osukl.com │ 12
HDHDMI
HDMITouchScreen
HD LocalDisplays
7”
IP 68
IP68
13 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
PART NUMBER
5185Main Features
Poseidon® 7 and Poseidon® 10 are the stripped down versions of the Oceanic Systems classic Poseidon® system. Designed for use on smaller vessels where a full system would be impractical, the units incorporate all vessel control and monitoring functionality in a small, yet powerful package with a single display unit.
PART NUMBER
10”
HDHDMI
IP68 HDMITouchScreen
HD LocalDisplays
IP 68
+ 44 (0) 1425 610022 │ www.osukl.com │ 14
5190
15 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
M U LT I P L E E N G I N E D I S P L AY S
Multiple Engine Display Display size 19”Size: 513 W x 132 H x 53 D
4161PART NUMBER
HD NMEA2000 J1939 !
MicroPlug
EngineError
Messages
GPSCompass
GPSTime
RudderAngle
HD NMEA2000®
Standard
J1939Standard
Disp
lays
Compatible with Caterpillar, Cummins, MAN, MTU, Volvo, Yanmar and other inboard or outboard engines.
Selectable SI or American display units.
Certified to work with J1939 and NMEA2000® devices.
Displays 1, 2 3, or 4 fuel tanks and 2, 3 or 4 engines.
Features the rudder/steering angle indicator and a GPS Compass Rose and local GPS time from the NMEA2000® network.
+ 44 (0) 1425 610022 │ www.osukl.com │ 16
HD NMEA2000 J1939 !
MicroPlug
EngineError
Messages
GPSCompass
GPSTime
RudderAngle
HD NMEA2000®
Standard
J1939Standard
Compatible with Caterpillar, Cummins, MAN, MTU, Volvo, Yanmar and other inboard or outboard engines.
Selectable SI or American display units.
Certified to work with J1939 and NMEA2000® devices.
Displays 1, 2 3, or 4 fuel tanks.
Features the rudder/steering angle indicator and a GPS Compass Rose and local GPS time from the NMEA2000® network.
Dual Engine Display Display size 10”Size: 199 W x 252 H x 52 D
4166PART NUMBER
TA N K M A N AG E M E N T
Tanks
17 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
50mA 50mANMEA
2000NMEA
2000
MicroPlug
MicroPlug
NMEA2000®
Standard
NMEA2000®
Standard
Less than50mA PowerConsumption
Less than50mA PowerConsumption
Volumetric Fuel Level Sender
Measurement and output of the remaining fuel LEVEL or VOLUME in 1% stops.
The 3271 can be programmed with up to 100 volumetric points so that it offers the most accurate indication of the remaining VOLUME of fuel in the tank.
The sender constantly monitors the fuel for any water contamination and warns if any is found to protect the engine from expensive damage.
It is robustly constructed in stainless steel with no moving parts to stick or fail in service. It is available to suit tank depths from 250mm to 2 metres.
Install immediately as all senders are shipped pre-calibrated to give a percentage reading and cut to your specified length.
Water Level Sender
Measurement and output of the remaining fuel LEVEL or VOLUME in 1% stops.
The 3281 can be programmed with up to 100 volumetric points so that it offers the most accurate indication of the remaining VOLUME of fresh water in the tank.
It is robustly constructed in stainless steel with no moving parts to stick or fail in service. It is available to suit tank depths from 250mm to 2 metres.
Install immediately as all senders are shipped pre-calibrated to give a percentage reading and cut to your specified length.
3281PART NUMBER PART NUMBER
3271
+ 44 (0) 1425 610022 │ www.osukl.com │ 18
SAE 5 Bolt 1.25” BSP 1.5” NPT
Sender Type 3271 3271T/3281T 3271N/3281N
Stocked sender
lengths in mm.
All senders can be
cut and calibrated to
order.
500 500 500
1000 1000 1000
1500 1500 1500
2000 2000 2000
3271 & 3281 SENDER MOUNTING TYPES
5x Ø4.5mm holes on Ø54mm
Inner hole Ø47mm
Outer Ø68mm
SAE 5 Bolt to 1 1/4” BSP Sender Mounting Ring
3261PART NUMBER
DECK GAUGES
Tanks
MONITOR & MANAGE FUEL, FRESH WATER, GREYWATER AND BLACK WATER TANKS.
PLC NMEA2000 50mAIP 68
IP68 Less than50mA PowerConsumption
PLCStandard
NMEA2000®
Standard
52505250-F
Fuel5250-W
Water
Deck Level Gauge
PREVENT OVERSPILL
Provides an accurate and clear display of fuel and fresh water tank level at the point of filling. It is designed to be installed near to the tank filler to avoid refuelling spills and prevent water pollution incidents.
The blue LED display automatically adjusts its brightness to the ambient light levels.
Stainless steel bezel that is easy to install.
The unit is designed and certified to work with NMEA2000® network or with a 0-10V PLC output.
Constructed to meet the IEC60945 standard.
PART NUMBER
19 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
50mA IP 66NMEA
2000
MicroPlug
IP66Less than50mA PowerConsumption
NMEA2000®
Standard
Digital Tank Level Gauge
Digital display for fuel, fresh water, grey water orblack water tanks.
The gauge includes an automatic high and low level alarm that operates a sounder and a flashing red LED when the level passes user settable limits. The sounder can be muted from the front panel.
It is also fitted with a 10 amp relay that can control an external alarm or device that is set when the unit triggers its high or low level alarm.
The blue LED display automatically adjusts itsbrightness to the ambient light levels.
Certified to the NMEA2000® standard, the unit connects to the network using a single micro plug. It draws less than 150mA and is rated to IP66.
50mA IP 66NMEA
2000
MicroPlug
IP66Less than50mA PowerConsumption
NMEA2000®
Standard
Fuel Transfer Controller
The green START button manually starts the pump out where and when allowed. The unit automatically stops the pump out when the tank is empty to avoid the pumps running dry. The user can also stop the pump out at any time by pressing the STOP button.
The Controller is fitted with a 10 amp relay to control the pump out pump.
The blue LED display automatically adjusts itsbrightness to the ambient light levels.
The red LED indicates when the pump out is in progress.
Certified to the NMEA2000® standard, the unit connects to the network using a single micro plug. It draws less than 150mA and is rated to IP66.
335033503350-FFuel
3350-W Fresh Water
3350-B Black Water
3350-G Grey Water
3350-FTC Fuel Tank Controller
3350-GTPO Grey Water Pump Out
3350-HTPO Holding Tank Pump Out
PART NUMBER PART NUMBER
TANK LEVELS AND TRANSFER CONTROLLERS
+ 44 (0) 1425 610022 │ www.osukl.com │ 20
Tanks
4660 4661 4662PART NUMBER PART NUMBER PART NUMBER
21 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
Part No. Depth
4650 0-2m
4651 0-4m
Part No. Depth
4652 0-2m
4653 0-4m
SAE 5 Bolt Mounting Cable Gland Plate
Submersible HydrostaticFuel Sensor
Submersible Hydrostatic Fuel Sender with 4-20mA output for use with 4291 Tank Level Adaptor.
4650 4652
SUBMERSIBLE HYDROSTATIC TANK SENDERS
PART NUMBER
1 1/4” BSP ThreadedMounting Cable Gland Plate
1 1/2” NPT ThreadedMounting Cable Gland Plate
Submersible HydrostaticFresh Water Sensor
Submersible Hydrostatic Fresh Water Sender with 4-20mA output for use with 4291 Tank Level Adaptor.
PART NUMBER
4670 4672Side Mount HydrostaticFuel/Fresh Water Sensor
Side Mount Hydrostatic Fuel/Fresh Water Tank Sender with 4-20mA output for use with 4291 Tank Level Adaptor. G 1/2” Mount.
Side Mount HydrostaticGrey/Black Water Sensor
Side Mount Hydrostatic Grey/Black Water Tank Sender with 4-20mA output for use with 4291 Tank Level Adaptor. G 1/2” Mount.
Part No. Depth
4670 0-2m
4671 0-4m
Part No. Depth
4672 0-2m
4673 0-4m
PART NUMBER PART NUMBER
SIDE MOUNT HYDROSTATIC TANK SENDERS
+ 44 (0) 1425 610022 │ www.osukl.com │ 22
Ad
apto
rs
23 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
Tank Sender Adaptor
Allows a standard resistive tank level sender to connect to the NMEA2000® network.
It is compatible with both European standard 0-180 Ohm and United States standard240-30 Ohm tank level senders and is accurate to ±1%.
It is easily configurable to resistive senders from Fuel, Fresh water, Waste water, Live Well, Oil and Black water tanks linking them to the NMEA2000® network. It supports up to 16 tanks of each type on a single network.
3125NMEA
2000IP 67 50mA
IP67 NMEA2000®
Standard
MicroPlug
Less than50mA PowerConsumption
PART NUMBER
Modbus Gateway
Provides a powerful solution to convert NMEA2000® messages from engines, tank senders, generators, AC monitors, battery banks, battery chargers and control switches to the Modbus RS485 format.
Large yacht monitoring systems use the Modbus RS485 standard to communicate with PLCs and sensors on board to control and monitor on board systems such as tank levels, pump, ventilators, lighting, alarms and other equipment.
The Modbus Gateway system can interpret the NMEA2000® data from the attached devices and even control up to 8 banks of 28 switches / relays to control on board facilities.
A DA P TO R S
NMEA2000 IP
MicroPlug
IP40NMEA2000®
Standard
DINRail
3155PART NUMBER
40
+ 44 (0) 1425 610022 │ www.osukl.com │ 24
NMEA2000 IP 67
MicroPlug
IP67NMEA2000®
Standard
3271-SAM
Sender Averaging Module
Solves the problem of inaccurate tank level gauge readings caused by the tank contents moving within a long tank when the boat is under power.
The module calculates a mathematical average of two tank senders mounted in the tank and outputs that result in a standard Tank Level PGN 127505 so that all attached displays show the average value of the tank level.
The 3271-SAM signals if either sender is missing or has detected water in the tank so that the user can be confident of the quality of the readings.
PART NUMBER
4291NMEA
2000
MicroPlug
WAGO®
CageNMEA2000®
Standard
4-20mA Tank Level Adaptor
Designed to monitor any 4–20mA level sensor including Fuel, Fresh Water, Waste Water, Live Well, Oil & Black Water senders on the NMEA2000® network.
The 4291 gives a remaining level percentage reading with ± 1% full scale deflection, and can be configured to give a volumetric output.
The unit also has a heartbeat blue LED confirming NMEA2000® transmission.
PART NUMBER
Ad
apto
rs
25 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
J1939NMEA2000
J1939Sandard
DINRail
WAGO®
CageNMEA2000®
Standard
J1939 to NMEA2000® Adaptor
Takes standard J1939 engine and transmission messages and transmits them onto the NMEA2000® network.
The J1939 interface is optically isolated to prevent ground loop problems and is read-only so no messages are sent to the J1939 interface for absolute safety.
The adaptor is equipped with LEDs to indicate when J1939 messages are received and when NMEA2000® messages are transmitted.
This unit uses a simple set of two small rotary source and address switches so multiple adaptors can exist on the same networks.
3185PART NUMBER NMEA
2000 IP 67
MicroPlug
IP67NMEA2000®
Standard
Rudder Angle Adaptor
Allows standard European or American standard resistive rudder angle senders to transmit their rudder position over the NMEA2000® network.
The unit has a red port LED and a green starboard LED that flash to indicate the unit is transmitting the appropriate rudder position.
The mechanical setup of the rudder angle sender is greatly simplified by setting the rudder midships and then adjusting the linkage to the sender until both LEDs illuminate when the sender is also at midships.
In multiple rudder installations the sender type selection and the device instance setup is simply done with the small rotary switch on the unit.
3165PART NUMBER
5099
Male Deutsch Adaptor kit
Deutsch DT12 Connector Kit for sealed adaptors.
PART NUMBER
High Accuracy Fuel Flow Sensor
+ 44 (0) 1425 610022 │ www.osukl.com │ 26
NMEA2000® Flow Adaptor Module
The Oceanic Systems 5720 Flow Adapter Module is designed to report fuel flow and usage over the NMEA2000® network using positive displacement flow meters.
These high accuracy sensors connect directly to the 5720 using the fully water resistant IP68 rated standard Deutsch connectors. The 5720 is compatible with sensors having a single pulsed output as well as those with a 2-phase quadrature output (for cases where reverse flow must be considered). Additionally high accuracy PT100 temperature compensated sensors are fully supported.
As required, the 5720 may be set up to measure two individual flow rates, consumption data based on flow and return rates or total fluid transferred. This configuration along with sensor parameters and network instances may be made to the flow adapter over the NMEA2000® network or by Bluetooth™ using the Oceanic Systems mobile configuration app available for Apple and Android devices.
5720PART NUMBER
Part No. LPH
5721 5-100 LPH
5722 25-500 LPH
5723 75-1500 LPH
Mo
nito
ring
AC M O N I TO R I N G
27 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
NMEA2000
DINRail
WAGO®
CageNMEA2000®
Standard
3420 3423AC Monitor
Accurately measures the AC voltage, AC current and AC frequency, reporting them over the NMEA2000® network.
The unit can be used for Single Phase, Bi-Phase and Three Phase systems and is suitable for measuring AC sources such as shore power, generators and inverters. It can also measure the voltage and frequency on AC Bus Bar Systems.
The monitor has a blue LED that flashes as the unit transmits data over the network and a rotary device instance switch to allow local configuration of up to 16 units on a single network.
AC Current Transformer
0-200 Amp Current Transformer for use with 3420 AC Monitor to measure each additional phase.
Set up is as simple as installing the Single Phase Conductor through the Current Transformer, using a cable tie to secure.
The cables from the current transformer to the external sockets are connected using the 6 x 2way WAGO cage clamp terminal block.
PART NUMBER PART NUMBER
S UITA B L E FO R S IN G L E PH A S E , BI- PH A S E A N D T H R EE PH A S E S YS T EM S .
D C M O N I TO R I N G
+ 44 (0) 1425 610022 │ www.osukl.com │ 28
NMEA2000
DINRail
NMEA2000®
Standard
3410 3412DC Monitor
Accurately measures the DC voltage, the DC current of the attached battery and monitors the state of charge. It also calculates the remaining capacity of the battery at the current rate of discharge.
The unit can be used for batteries, solar panels and wind generators. It keeps a track of loads and battery usage even when the NMEA2000® network is powered off.Uses the 3412, 3415 or 3416 current transformer or shunts.
DC Current Transformer
Designed to measure DC currents of -200A to +200A and provide a voltage output that can be measured on the 3410 DC Monitor.
Set up is as simple as feeding the power cable through the ring of the 3412 and using a cable tie to secure the power cable to the projection below the ring.
3415500 Amp DC Shunt
The 3415 500 Amp DC Current Shunt is designed to measure DC currents of 500A to +500A for use with Oceanic 3410 DC Monitor.
34161200 Amp DC Shunt
The 3416 1200 Amp DC Current Shunt is designed to measure DC currents of -1200A to +1200A for use with Oceanic 3410 DC Monitor.
PART NUMBER
PART NUMBER
PART NUMBER
PART NUMBER
WAGO®
Cage
T E M P E R AT U R E M O N I TO R I N G
Mo
nito
ring
29 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
MicroPlug
IP30
Cabin Air Temperature Sensor
Designed to accurately measure the air temperature in a boat cabin using a highly accurate type K thermocouple mounted in an attractive white plastic enclosure.
The unit is designed to be wired to an Oceanic Systems 4521 Temperature Input Module.
4522IP 30
PART NUMBER
4511Exhaust Gas Temperature Probe
The probe is designed to be easily mounted in the exhaust hose with an armoured stainless steel sheathed cable to the NMEA2000® sensor module mounted within 3 metres.
The probe mount is a corrosion resistant duplex stainless steel pocket that is sealed to prevent any exhaust leaks.
PART NUMBERNMEA2000
MicroPlug
IP30NMEA2000®
Standard
IP 30
4510Exhaust Gas Temperature Sensor
Designed to measure the exhaust gas temperature of a marine engine or generator. It uses a highly accurate Type T thermocouple and reports the temperature directly onto the NMEA2000® network. It shows the actual temperature to prevent partial cooling water blockages before any damage occurs.
PART NUMBER
MicroPlug
IP30
4530IP 30
PART NUMBER
Cabin Temperature and Humidity Module
Allows up to 16 4531 Cabin Temperature & Humidity Sensors to be connected to the module and report the temperature and humidity values over the NMEA2000® network.
The module is compatible with either 12 or 24 Volt systems and requires no user setup menus.
+ 44 (0) 1425 610022 │ www.osukl.com │ 30
NMEA2000
DINRail
WAGO®Cage
NMEA2000®
Standard
4 Channel Temperature Module
Monitors up to 4 type K thermocouples which include the Oceanic Systems 4525, 4522, 4523 and 4524. The unit will also work with standard type K Temperature Sensors supplied by the user. The 4521 has user-configurable temperature source information for each channel and a red warning LED that lights up in case of malfunction and can be panel or DIN-rail mounted.
4521PART NUMBER
IP 67
MicroPlug
IP67
Rugged Engine Room Probe
The 4525 is an essential piece of equipment for your vessel. It is perfect for taking air temperature readings across a variety of locations.
4525PART NUMBER
Liquid Temperature Probe
Rugged, robust temperature probe made for sensing the temperature of various liquids around the vessel.
Ring Bolt Temperature Probe
Rugged, robust temperature probe for sensing the temperature of various components around the vessel.
45234524PART NUMBER PART NUMBER
Mo
nito
ring
31 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
NMEA2000
NMEA2000®
Standard
Vacuum & Pressure Sensors
The Oceanic Systems’ Pressure Sensor range can monitor a wide range of liquids or gas pressures in the marine environment.
The units use a high performance piezoresistive pressure transducer as t he sensing part, and the inner structure is O-ring sealed. All the sensors have a -10 to 70°C wide temperature compensation.
Vacuum/Pressure Sensors range
4620-4626
Part No. Pressure range
4620 Vacuum -1 Bar
4621 Pressure 0-3 PSI
4622 Pressure 0-10 PSI
4623 Pressure 0-100 PSI
4624 Pressure 0-500 PSI
4625 Pressure 0-1000 PSI
4626 Pressure 0-5000 PSI
4601NMEA2000® 4-20mA Pressure Adaptor
Designed to monitor any 4 – 20mA pressure source including Atmospheric, Water, Steam, Compressed Air, Hydraulic, Oil & Fuel on the NMEA2000® network. It provides a standard NMEA2000® pressure PGN130314 over the network and is an important part of our complete Poseidon® Monitoring and Digital Switching System.
PART NUMBER PART NUMBER
P R E S S U R E M O N I TO R I N G
4645Pressure Snubber
Protects Transducers, Gauges and Switches from Pressure Spikes, Surges and Water Hammer.
PART NUMBER
+ 44 (0) 1425 610022 │ www.osukl.com │ 32
5700Air Flow Monitor
Measures 0-125 m3/hr Adjustable Alarm set pointLocal Display.
PART NUMBER
5716PVC Tubing Red
PVC tubing from Duct Probeto 5700 Air Flow Monitor.
Part No. Length
5716 2m
5717 25m
PART NUMBER
5718PVC Tubing Blue
PVC tubing from Duct Probeto 5700 Air Flow Monitor.
Part No. Length
5718 2m
5719 25m
PART NUMBER
A I R F LO W M O N I TO R I N G
5704Duct Flow Probe
Part No. Length
5703 0-2m
5704 0-4m
PART NUMBER
Duct Probe 95mm long. Other lengths available.
Mo
du
les
IP
33 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
I N P U T A N D O U T P U T M O D U L E S
NMEA2000
MicroPlug
Relay Output Module
Allows messages over the NMEA2000® network to directly control 8 power relays using standard NMEA2000® PGN messages.
Each of these relays are totally isolated and can be connected to any mix of DC or AC control circuits, each controlling up to 8 Amps at 35 Volts for DC or up to 16 Amps at 250 Volts AC resistive load.
The relay would be supporting remote alarm inputs, pump management, power switching connectors, light control and many other applications where power needs to be controlled over the network.
Each 3478 has a switch settable Switch Bank Instance to allow multiple Relay Output Modules on a single network.
Each relay output has a green LED to indicate when each relay is operated.
The 3478 is operated from the standard NMEA2000® Switch Bank Control PGN 127502 from any NMEA2000® controller. The unit also transmits the standard NMEA2000® Switch Bank Status PGN 127501 every 2 seconds to keep the network updated.
3478NMEA
2000
MicroPlug
IP40NMEA2000®
Standard
NMEA2000®
Standard
Switch Input Module
The 4410 16 Channel Switch Input Module monitors switch closure devices and reports their status over the NMEA2000® network.
These devices can include fire/smoke/carbon monoxide detectors, bilge and flood float detectors, doorway and porthole closure detectors, valve status detectors and many more. With this module and suitable NMEA2000® displays the status of all these items can be viewed anywhere on the vessel.
The unit has PLC quality inputs that are manufactured to IEC61131 and IEC61000 standards so they are optically isolated and fully protected against ESD, Voltage Surges and Transients to ensure the most reliable operation at all times.
It is compatible with either 12 or 24 Volt systems. It requires no user setup menus but the simple setting of two small rotary address switches so multiple Switch Input Modules can exist on the same network.
Each switch input also has a tell tale green LED to indicate when it is active.
WAGO®
CageDINRail
PART NUMBER
4410PART NUMBER
40IP
IP40
40
Carbon Monoxide Detector
Combined Smoke/ Heat Detector
Bilge Detector/Switch10Amp
Fixed Temp Heat Detector
Magnetic Switch Cylindrical Indoor/Outdoor
Magnetic Switch Rectangular Outdoor
5301
5311
5302
5312
53225321
Rate of Heat Rise Detector Magnetic Switch Rectangular Indoor
5313 5320
Bilge Detector/Switch 20Amp
Motion Detector
5303
5304Optical Smoke Detector
5310
PART NUMBER
PART NUMBER
PART NUMBER
PART NUMBER
PART NUMBER
PART NUMBER
PART NUMBER
PART NUMBER PART NUMBER
PART NUMBER
PART NUMBER
PART NUMBER
Grounded Input Adaptor
4411
+ 44 (0) 1425 610022 │ www.osukl.com │ 34
C A BLE S & CONNEC TORSOur cables and connectors range has been developed
to satisfy customer requirements for installing an NMEA2000® network in a vessel.
Cab
les
35 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
NMEA2000®
+ 44 (0) 1425 610022 │ www.osukl.com │ 36
Female Blanking Plug
3801-FPART NUMBER
Micro Dual Tee Adaptor
3802-2PART NUMBER
Micro Male Terminator
3804PART NUMBER
Micro Bulkhead FeedThrough
3807PART NUMBER
Male Blanking Plug
3801PART NUMBER
Micro Quad Tee Adaptor
3802-4PART NUMBER
Micro Female FieldInstallable Connector
3805PART NUMBER
Micro Inline Terminator
3808PART NUMBER
Micro Female Terminator
3803PART NUMBER
Micro Male FieldInstallable Connector
3806PART NUMBER
PART NUMBER
Micro Elbow Adaptor
3840
Micro Trunk to MicroDrop Tee Adaptor
3802PART NUMBER
Cab
les
37 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
Micro Trunk/Drop Cable
3810-3819
Micro Cable100 Metre Reel
382124 Volt to 12 Volt NMEA2000® Power Adaptor
3890-MF
PART NUMBER
PART NUMBER PART NUMBER
Micro Power Tee Dual Feed
3832PART NUMBER
CABLE LENGTHS
Part No. Length
3809 0.2m
3810 0.5m
3811 1m
3812 2m
Part No. Length
3813 3m
3815 5m
3819 10m
Volvo/Suzuki Hub to NMEA2000® Micro Female Socket Adaptor
3851-FPART NUMBER
MANUFACTURER CONNECTING CABLES
Raymarine E Series to NMEA2000® Male Adaptor 1 Metre
3853-1PART NUMBER
Honda Outboard to NMEA2000® Male connector 3 Metre
3852-3PART NUMBER
Honda Outboard to NMEA2000® Male connector 6 Metre
3852-6PART NUMBER
Yamaha Hub to NMEA2000® Female Socket Adaptor
3861-FPART NUMBER
Yamaha Hub to NMEA2000® Network Link Cable
3862-0.2PART NUMBER
+ 44 (0) 1425 610022 │ www.osukl.com │ 38
Micro Trunk/Drop Gender Change CableMale/Male
Micro Trunk/Drop Gender Change CableFemale/Female
3825 3826PART NUMBER PART NUMBER
Length: 0.5mLength: 0.5m
39 │ 2020 Oceanic Systems Catalogue │ Copyright Reserved
Micro Trunk/Drop Cable Female/Male 90°
3847-3849
Part No. Length
3847 0.2m
3848 0.5m
3849 1m
PART NUMBER
Micro Network Starter Kit
3800
N E T W O R K S TA RT E R K I T
The Network Starter Kit includes:
2x 3802 Micro Trunk/ Drop Tee Adaptor1x 3803 Micro Female Terminator1x 3804 Micro Male Terminator1x 3812 Micro Trunk/Drop Cable 2m1x 3832 Micro Power Tee Dual Feed
PART NUMBER
Micro Trunk/Drop Cable Male/Female 90°
3827-3829
Part No. Length
3827 0.2m
3828 0.5m
3829 1m
PART NUMBER
Cab
les
+ 44 (0) 1425 610022 │ www.osukl.com │ 40
Oceanic Systems (UK) Ltd
Oceanic Systems America
[email protected]: +44 (0) 1425 610022
Units 10-11, Milton Business CentreWick Drive, New MiltonBH25 6RH, UK
[email protected]: EST (844) 898 6462
USA
oceanic-systems-uk-ltd