obps brochure
DESCRIPTION
ENG13 ActivityTRANSCRIPT
-
fast. reliable. The Optical Blood Pressure Sensor is
a device that measures blood pressure and
pulse rate with the use of an optical sensor.
It has a sensor for the finger and another for
the neck for the measurements. It also has a
LED display to show results and notifications
and a USB port so that it can be connected
to a computer or another device.
Optical measurement gives you the data quickly. Saves time. Saves lives.
Can send alert and data via internet so your doctor can respond immediately.
Non-invasive approach cuff-less design so you can measure blood pressure and pulse rate safely and conveniently.
Simple user interface so you can operate it easily. No need for advance knowledge in blood pressure and pulse rate measurement and in computers.
Equipped with 512MB internal memory so you can save results for future use, do as much as readings or large scale analysis, and transfer data to another device via USB.
Portable. Use it anywhere anytime.
Inexpensive so you can afford it and still have fund for other needs.
the edge
OBPS measures blood pressure and pulse rate faster without the use of cuffs. Just place your fingertip on the sensor for finger as you place the device on your neck at the same time, and results will be displayed within 5 seconds.
It accurately measures pressure and pulse in wide ranges.
With its microcontroller, it is easy to setup the device and input required information like the e-mail address where the data will be sent to.
It sends an alert to users doctor when the device detects that the user has irregular blood pressure and/or pulse rate (sends data thru e-mail).
Results can be stored in its internal memory or copied to a computer via USB.
It is lightweight and has a long battery life.
Its materials and components make it economical.
Measuring Method: Optical
Pressure Range: 0-300mmHg
Accuracy: 1 mmHg
Pulse Rate Range: 0-200 beats/min
Accuracy: 1%
Display: LED Touchscreen
Dimensions: 5cm by 6cm
Raspberry Pi Microcontroller
Wi-Fi Connectivity
Memory: 512MB, Internal
Material: Acrylic Plastic Casing
Dimensions: 10cm by 7cm by 1.5cm
Weight: 200g
Power Supply: Li-Polymer Battery
designed for you
index finger is placed on the sensor for finger, the hollow surface in front of the device
the sensor for the neck, the bulge at the back of the device, is positioned on the neck where the pulse can be felt
place fingertip on the sensor for finger and position device on the neck at the same time
-
This might just be what you need
Contact Us
the right innovation
to guide your health