O342m AnalyserUV Absorption Ozone Analyser

Provides accurate O3 measurement in the ranges of 0.4 ppb to 10 ppm

The O342M analyser combines years of experience of a wide range of

analysers with an enhanced electronics package to produce the most

advanced solution for ambient air monitoring

Free from Interference The MMS is composed of autonomous modules based on their analysis

1. Chemiluminescence (NO, NO2, NOx)

2. UV Photometry (O3)

3. IR Gas Filter Correlation (CO, CO2)

4. UV Fluorescence (SO2)

Advanced Technology for Multitasking Operation Multitasking software allows advanced calculation such as wind

direction averaging and gives user-friendly access to the instrument

set-up, as well as the status and maintenance parameters. Users also

have the freedom to access to real-time synoptics, auto-diagnostics and

maintenance data screens.

KEYFEATURES

• User programmable ranges and average

times

• Full remote emulation of the analyser

• Built-in USB port and serial interface for

full remote control and display

• Built-in storage of 12 months 1/4 h

average data

• Interactive menu-driven display

• Real-time calibration graphs

Continuous & accuratemeasurement of O3 in

ambient air “ “

GASESANALYSED

O3

11 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HTT: +44(0)151 666 8300 F: +44(0)151 666 8329 E: sales@a1-cbiss.com W: www.a1-cbiss.com Buy Online: shop.a1-cbiss.com

Cert No. 996ISO 9001

TECHNICALSPECIFICATION

APPLICATIONS• Continuous indoor and outdoor air quality monitoring

• Stationary and mobile AQMS laboratories

• Industrial fence-line monitoring

• Continuous emissions monitoring (CEM) by dilution

• Laboratory and field studies on ozone effects

PHYSICAL • Dimensions: (L x W x H): 483 x 545 x 133 mm

• Weight: 9kg (19.9 lbs)

POWER • Power supply: 230v / 50 Hz or 115 V / 60 Hz

• Power consumption: 70 VA approx

CERTIFICATIONS• TUV report no 936/21205818/D

MEASUREMENT • Ranges: programmable from 0- 0.1 / 0.2 / 0/5 / 1 / 2 / 5 /

10ppm

• Lower detectable limit: <0.4 ppb

• Zero drift: less than 1 ppb / week

• Span drift: less than 1% / week

• Linearity: ± 1% of full scale

Complete Project Solutions

• Expert consultancy • Project management • In-house project design & build • Installation & commissioning

• After product service & support

Our complete project solutions are developed to assist you in IED compliance. We achieve this through;

Find a1-cbiss on: