A0038 - UPPER TERMINAL GUIDEA0039 - LOWER TERMINAL GUIDE A0041 - DRAG STOCK A0045 - HOLD DOWN BLOCKA0046 - ANVIL (WIRE) A0047 - ANVIL (INSULATION)A0048 - CUTTER BLOCK A0049 - CUTTERA0050 - CUTTER SPRINGThese items will be referred to in this text by a number in brackets - eg: (2), (6), (34), (45), etc. Not all items listed will be referenced because they do not require adjustment or have any adjustment available to them, but they are related to the crimping function and the adjustments made to the surrounding parts of the machine. So in carrying out any adjustments, their position, function and relationship to the crimping action and to the adjustment being made should be understood. In addition, not all items needing adjustment are shown in the exploded diagram, and the diagram itself shows only one of the interchangeable crimping heads and not the whole machine. Therefore other adjustments will be referred to as necessary in the relevant photographs.Adjustments to be made are not extensive or difficult, but a general understanding of how the machine achieves its crimping action through one complete cycle - knowing what happens, plus when and how - will be helpful in making correct adjustments to the machine and keep it operating correctly.