nu-calgon product catalog - canadian

8/18/2019 Nu-Calgon Product Catalog - Canadian

1/40

Air Conditioning, Refrigeration & HeatingQuality Products for

CANADIAN PRODUCT CATALOG


2/40

Permanent

Compatible with All Refrigerants & Oils

Easiest to Install

READY

SET

SEAL!

Takes seconds to inject.

No injection hose or caulk gun needed.

Concentrated formula means

less material in the system.

Table of Contents

Total System Protection 1-3

Coil Cleaners and Sprayers 4-10

Indoor Air Quality & ClenAir by Nu-Calgon 11-14

Gas Leak Detectors 15

Refrigeration Oil & Vacuum Pump Oil 16-17

Aerosol Products 18-20

Specialty Products 21

Insulation Products 22-23

Glycol & Closed Systems 24-25

Water Treatment 26-29

Plumbing Products / Water Filtration Maintenance 30

Water Filtration 31-32Nu-Plus by Everpure 33-37


3/40 Visit us at www.nucalgon.com or call 1-800-554-5499 1

A/C EasyDry

This product is a quick and simple way to prevent and eliminate moisture in a system.

A/C EasyDry contains a dehydrating agent that converts system moisture into a natural

organic material that is compatible with and mixes with the lubricant. It is great for preventing

acid formation which is caused by moisture in a system and works with all refrigerants (except

ammonia). Each can will treat up to a 5 ton system and is easily installed with the reusable

piercing valve and hose.

3 ounce pressurized can 4051-06

A/C Piercing Valve and Hose 4051-99

A/C EasySealA/C EasySeal prevents and seals refrigerant leaks in residential and light commercial ACR systems. It is perfect for those hard-to-find

and expensive-to-fix leaks and works with all refrigerants (except ammonia). It is easily installed with the reusable piercing valve and hose.

A/C EasySeal circulates with the system’s refrigerant, and if a leak should occur, it will quickly and permanently seal the leak and prevent the

system from losing refrigerant and shutting down.

A/C EasySeal 3 ounce pressurized can - treats 1.5 to 5 ton systems 4050-06

A/C EasySeal-SS 1.25 ounce pressurized can - treats fractional to 1.5 ton systems 4050- 01

“2+1” Display Pack 2 cans of A/C EasySeal and an A/C Piercing Valve and Hose 4050-02

A/C EasySeal-XL Treats systems with refrigerant charge of 125 lbs. – 250 lbs. 4050-10

A/C Piercing Valve and Hose 4051-99

Total System Protection

EasySeal Direct InjectEasySeal Direct Inject is a new generation of sealants. Its patent pending injection method

makes it easier to install than other sealants. With this new injection system, pumping down

the unit is a thing of the past. EasySeal Direct Inject works with all refrigerants and oils.Concentrated formula means less material in system. It is perfect for split systems, heat pumps,

microchannel coils, packaged units, and mini splits.

EasySeal Direct Inject 4050-08

The Next Generation of Refrigerant Leak Sealant

Visit us at www.nucalgon.com or call 1-800-554-5499 1


4/402

Rx11-flush®Rx11-flush is a unique solvent engineered specifically for flushing refrigeration and air conditioning systems. Rx11-flush is ozone-safe,

non-toxic, and non-flammable. Used exactly like the old R-11 flushing process, its patented HFC based solvent formulation is powerful

enough to flush away sludge, carbon residues, oils, acids, water and other particulate. R x11-flush is ideal for system flushing after

burnouts, during retrofits and for flushing line sets for R-410A conversions. Rx11-flush has been the industry’s standard for over a

decade and contractors agree, it’s the best flush for R-410A retrofits and after compressor burnouts.

Rx11-flush Starter Kit Contains a 1 lb. canister, Rx11-flush Gun and Hose, and Injection Valve 4300-08

1 lb. canister Recommended for a 3-4 ton system 4300-09

2+1 Display Pack Contains one Injection Valve and two 2 lb. canisters 4300-10

2 lb. canister Recommended for a 5-7 ton system 4300-11

13 lb. canister Recommended for up to 50 ton system 4300-15

26 lb. canister Recommended for systems over 50 tons 4300-26

Rx11-flush® LiquidRx11-flush Liquid is a new and improved chemistry that is the next generation in

flushing technology. It remains a constant boiling solvent and is now stronger, faster

acting and dissolves more oil, moisture and contaminants than any other flush. It is

ideal for line sets, burnouts and other flushing requirements.

19.5 ounce can 4300-30

Rx11-flush Liquid Starter Kit 4300-38


Endorsed by York®, Goodman®,

Nordyne®, Coleman®, and Daikin®

TotalSyst

emProtection

Rx11-flush® Accessories

The Rx11-flush product family also includes various support tools. This includes the

Injection Valve for hooking up to a charging hose for flushing and the Flushing Tool

for facilitating line set flushing. In addition, the Rx11-flush Gun with a built-in flushing

attachment and the Rx11-flush Hose (24˝) are available.

Flushing Tool 4300-50

Rx11-flush Gun 4300-51

Rx11-flush Hose (24˝) 4300-52

Injection Valve 4300-89

(Injection Valve fits Pneu-flush® and pressurized Rx-Acid Scavenger® as well)



Phase III® Refrigeration Oil Acid Test KitFormulated for use with POEs as well as mineral oils and alkylbenzene. An inexpensive,

disposable test kit that provides proof-positive that acid level in refrigeration oil is either safe

or unsafe. Phase separation makes it easy to see change in color of acid indicator (even if a

leak detection dye has been added to the oil). Just two bottles to work with, it is simple, safe,

accurate, and small enough that you can carry several in your tool box.

1 each 4320-W8

Rx-Acid Scavenger®

The most effective way to neutralize or “scavenge” acid in refrigeration, air conditioning systems. It is perfect for use after burnouts or

during normal on-going system maintenance. In addition, Rx-Acid Scavenger can be used with all lubricants: mineral, alkylbenzene

and polyol ester. Now available in a pressurized can for easy injection into charged systems or hermetically sealed systems.

2 fluid ounce unpressurized bottle 4301-02

3.8 ounce pressurized can 4301-05

Injection Valve 4300-89

(Injection Valve fits R x 11-flush® and Pneu-flush® as well)


A/C Re-NewA/C Re-New is a highly formulated product that has established an outstanding track recordenhancing the performance of air conditioning and refrigeration systems. A/C Re-New aids

with sticky valves, quiets noisy compressors, reduces energy consumption by lowering

starting and running amps, and improves heat transfer in the evaporator and condenser. It’s

great for new and old systems.

1 quart can 4057-54

4 fluid ounce can 4057-55

A/C Re-New Injector Tool 4057-99

1. Pour the solution from the small bottle intothe large bottle. The bottom layer of this

mixture will be purple.

2. Completely fill the small bottle with oil from

the unit being tested. Do this immediately

after the oil is removed from the crankcase

since exposure to air will contaminate the oil

and give a false test result.

3. Pour the oil into the large bottle and shake well.

4. Wait two to three minutes. A phase separationwill develop as the oil rises to the top of the

mixture and an aqueous layer forms on the

bottom.

5. If the bottom layer:

Stays purple- the oil is satisfactory.

Turns light pink or loses color completely-

the oil is contaminated.

Good Oil Bad Oil

How to Test Oil with Phase III®


6/404

CoilCleanerSelectionGuide

EQUIPMENT USED ON

Condenser Coils • • • • • • • • •

Evaporator Coils • • • •

Permanent Filters • • • • •

Electronic Air Filters •

Small Condenser Coils • • • • • • • • •

Small Evaporator Coils • • • •

Fan Blades, Grilles, Etc. • • • • • •

Microchannel Coils • • • • •

FORMULATED TO REMOVE

Greasy Dirt & Oil • • • • • • • • •

Cooking Grease • • • • • •

Lint, Dust, Dirt & Grime • • • • • • • • •

Tobacco Tars •

Oxide (Corrosion) Deposits • • • •

Cottonwood/ Bugs • • • • •

FEATURES & BENEFITS

Product Type Alkaline Alkaline Alkaline Acidic Alkaline Alkaline Alkaline Alkaline Alkaline

Foaming • • • • • •

Brightening • • • • •

Degreasing • • • • • • • • • • •

Disinfectant

Non-Rinsing (Evaporators) • • •

Non-Rinsing (Condensers) •

Biodegradable • • • • • • • • • •

USDA Authorized • • • • •

EPA Registered

NSF Registered • • • • • •

Aerosol Liquid

Nu-Solve™ NRCal-Brite®Special HDCalClean®

Foam-Brite® Alka-Brite® Plus CalClean®TriClean™ 2x Tri-Pow’r® HDNu-Brite®

Aerosol Liquid

* Dilution ratios for no rinse applications: Tri-Pow’r HD = 10:1, Special HD CalClean = 40:1, Liquid CalClean = 10:1 (Aerosol CalClean must be rinsed.)

* * *

Nu-Calgon Coil Cleaners

Found on Pages 6-7

Coil Cleaner Selection Guide



Nu-Blast®Blackhawk ®Evap-Foam® Cal-Blast®Green CleanEvap-Green™Cal-Green™

EQUIPMENT USED ON

Condenser Coils • • • • •

Evaporator Coils • • • • •

Permanent Filters • • • • • • • •

Electronic Air Filters

Small Condenser Coils • • • • •

Small Evaporator Coils • • • • •

Fan Blades, Grilles, Etc. • • • • • • •

Microchannel Coils • • • • • • • •

FORMULATED TO REMOVE

Greasy Dirt & Oil • • • • • • •

Cooking Grease • • •

Lint, Dust, Dirt & Grime • • • • • • • •

Tobacco Tars

Oxide (Corrosion) Deposits

Cottonwood/ Bugs

FEATURES & BENEFITS

Product Type Alkaline Alkaline Alkaline Alkaline Alkaline Alkaline Solvent Solvent

Foaming • •

Brightening

Degreasing • • • •

Disinfectant

Non-Rinsing (Evaporators) • • • •

Non-Rinsing (Condensers) • •

Biodegradable • • • • • •

USDA Authorized •

EPA Registered

NSF Registered • •

Evap-Powl’r®-C

Nu-Calgon Coil Cleaners

Found on Pages 8-9

Coil Cleaner Selection Guide


8/406

Nu-Brite®

Nu-Brite is the most effective coil cleaner available today. It foams, brightens, and is an equally effective yet safer alternative to HF acid-

based products. It produces a high volume of foam that cleans more ef fectively than acids, particularly in removing grease. Biodegradable.

The liquid versions are USDA approved and NSF registered.

18 ounce can 4291-18

1 gallon bottle 4291-08 - Canadian #4891-08

2.5 gallon pail 4291-05*

55 gallon drum 4291-01

Foam-Brite® The ultimate in foaming alkaline cleaners. It provides for excellent cleaning and brightening,

and at the same time provides tremendous foaming to push dirt and grime out of the coil.

Can easily be used in place of the more dangerous HF acid-based products. Biodegradable.

NSF registered.

1 gallon bottle 4178-08



Alka-Brite® PlusA non-acid, alkaline based product for brightening and cleaning air cooled condensers. It

contains the best available detergents to quickly penetrate and remove oxidation, and its

foaming action helps to lift greasy soils out of the coil. Biodegradable. NSF registered.




CoilCleaners

Cal-Brite®Cal-Brite is a low pH cleaner developed for cleaning evaporator coils, air-cooled condensers

and other finned cooling and heating coils. It’s versatility is based upon glycolic acid and other

unique ingredients. It provides moderate foaming and brightening and is safe for use indoors as

well as outdoors. It’s particularly suitable when lime scale must be removed from outdoor coils.



Coil Cleaners

* A 2.5 gallon pail wrench is also available. Part Number ZE64.



Special HD CalClean® The best non-foaming cleaner available. Specifically formulated to remove tobacco tars from

electronic air cleaners as well as the most stubborn deposits from finned coils. USDA approved.

Also great for microchannel coils.




TriClean 2x™ The new way to clean a condenser coil. Simply connect to hose, clean, and rinse. TriClean 2x is

metal-safe, designed for rapid emulsion of soils from the coil. Restores efficiency and is ideal

for painted fin and microchannel coils.

1 quart sprayer with hose connector 4372-24

Coil Cleaners

CalClean®An alkaline detergent formulated for cleaning evaporator coils, air-cooled condenser coils, metal

filters, fan blades, and other surfaces soiled with grease, dust and dirt. Biodegradable. USDA approved

Aerosol is NSF registered. Also great for microchannel coils.





Tri-Pow’r® HDAn outstanding general purpose coil cleaner, providing detergency and degreasing as well as

deodorizing capability. Its positive emulsion technology is very effective against oily grime as

it converts the deposits into a more fluid or liquid form that can be easily rinsed away. It is non-

acid, non-toxic, and biodegradable. NSF registered. Also great for microchannel coils.



Nu-Solve™ NR

Ready-to-use, non-rinse condenser coil cleaner for situations with limited water availability

for rinsing. Nu-Solve NR is also for other applications where it is desirable to have less diluted

cleaning solution on a commercial roof or when a solvent based aerosol approach is not

practical. Nu-Solve NR effectively emulsifies dirt and grime and provides a benefit of leaving

a protective treatment on the aluminum for added corrosion protection, making the next

cleaning easier.




10/408

CoilCleaners

Coil Cleaners

Green Clean

A pleasantly scented, all-purpose, environmental friendly cleaner designed for the rapid

removal of grease and other heavy soils. It can be used right out of the bottle or diluted

for milder jobs. Biodegradable. Also great for microchannel coils.1 quart spray bottle 4186-24



Cal-Green™ Condenser Cleaner

Cal-Green is a plant-based, natural condenser cleaner that is powerful enough to removedirt, grease, and grime but environmentally safe for use around people, plants, animals, and

aquatic life. This non-foaming, non-toxic concentrate is perfect for cleaning residential or

commercial systems and restores their efficiency while being environmentally responsible.






Evap-Green™ Evaporator CleanerEvap-Green is a no rinse product is perfect for numerous heating and air conditioning

applications such as evaporator coils, roof top units, window units, metal filters, fan blades,

and more. Evap-Green uses only natural and renewable resources that are on the EPA’sDesign for the Environment list for safer chemistries. Evap-Green is also biodegradable and

will not harm plants, animals, and aquatic life. Metal-safe - meets OEM guidelines for all

aluminum coils, including microchannel types.

The following products are part of Nu-Calgon’s Environmentally Friendly Green Select line.

They have been recognized by the EPA’s Design for the Environment program, which tests

and identifies products that are safer for the environment.




Evap Pow’r®-C

A no rinse product formulated for cleaning evaporator coils. It is metal-safe, and it cleans

and emulsifies even the most stubborn soils and deposits. Biodegradable. USDA approved.





Cal-Shield®

Cal-Shield is a synergistic liquid formulation based upon DuPont’s Teflon® f luoro-additives. It’s

designed for application on air-cooled condensers, evaporator coils, and other finned heating

and cooling coils. Cal-Shield will shield and protect the coil from adverse conditions.

1 quart spray bottle 4148-32


Coil Cleaners

Nu-Blast®

A no rinse condenser coil cleaner in a convenient aerosol package. Double action of highpressure blast and solvent cleaning restores design efficiency of condenser coils. It is

non-flammable and non-conductive. No rinse required - cleaning solvent evaporates

completely. Use with adequate ventilation.


Cal-Blast®Cal-Blas t is a no rinse condenser cleaner that will powerfully separate undesirabl e materials

from the surface, offering maximum cleaning of finned coils. It’s a high performance

aerosol with excellent solvency and blasting spray.


Evap Foam No Rinse®

Evap Foam No Rinse is a high performing, heavy duty detergent. It is formulated with

special surfactants and alkaline cleaners that have been developed into a foaming, no rinse

product. Evap Foam is ideal for use on most coils, but it is particularly suited for use on

cooling or evaporator coils. The aerosol can be sprayed either right side up or upside down.

NSF registered.


Nu-Shield®

Nu-Shield, the newest generation of chemistry for protecting

coils and other surfaces, is a super-hydrophobic (water repelling)

product. The non-conductive formula has numerous applications

in the management of water on non-food, non-potable water

surfaces for the HVAC/R trade. Simply spray it on and watch the

water bead up and roll right off.

9 ounce can 4294-75

Non-treated :Water Clings

Nu-Shield :Water Repels

Blackhawk®Blackhawk is an expanding foam coil cleaner. Formulated to deeply penetrate the coil, it liquefies

to quickly remove grease, grime, or oily soils from deep within the coil. Blackhawk’s formulation

is safe and problem-free for cleaning evaporator or condenser coils in an occupied building;

produces no objectional fumes. It is particularly effective on coils on refrigerators, coolers, and

freezers located in restaurants and other commercial establishments. NSF registered.


Coil Protectants


12/4010

Sprayers Sprayers

ReplacementpartsareavailableforallNuCalgonsprayers.Contactyourlocalwholesaler.

Coil Gun® Probe The Coil Gun Probe is a time saving

accessory for use with the Coil Gun. Its

90º direction of spray allows cleaning

from inside the coil. It also provides easy

access in tough to reach locations to

discharge debris and emulsified grime in

an outwardly direction from the coil.

Coil Gun®A different approach to coil cleaning

- a “hose-end” sprayer that features 5

different mix ratio settings designed for

coil cleaners. Utilizes a 2 quart capacity

bottle and includes a foam wand as well

as “quick disconnect” capability.

Coil Mate™ Coil Cleaning HoseDurable 5/8 inch diameter reinforced

hose with Flex-Guard protection. The 50 ft

hose is equipped with solid brass wrench

fittings. The Coil Mate is a necessity when

using the popular Coil Gun® or rinsing an

air cooled coil with water after using a

Nu-Calgon coil cleaner.

No. 50P Poly Sprayer

The No. 50P is constructed of high-

density translucent polyethylene. It

has a half gallon (3 pint) capacity. The

nozzle is adjustable and the flow rate

is controlled by a thumb lever. It comes

with a 7˝ polyethylene pump.

No. 100P Poly Sprayer This sprayer is constructed of high-

density translucent polyethylene. It has

a funnel top for easy chemical pouring

and a 1 gallon working capacity. It

comes with a 8˝ polypropylene pump,

brass handle and extension tube with

adjustable nozzle, a wear-resistant hose,

and a pressure relief valve.

No. 200P HiPressure Poly Sprayer

Th e No. 20 0P Hi Pres su re PolySprayer is constructed of high-densitytranslucent polyethylene. It has a 2

gallon working capacity, funnel top,

pump handle, and equipped with all-

brass hardware. No pumping is required.

Pressurize the sprayer with water

through a “quick disconnect” fitting.

No. 220CP Poly Sprayer The No. 220CP Poly Sprayer is

constructed of high-density translucent

polyethylene with a funnel-top that

provides easy chemical pouring. This 2

gallon capacity sprayer features an easy

fill level indicator and comes with an 8˝

pump and a high resin plastic adjustable

nozzle with three feet of hose.

No. 300P Poly Sprayer The No. 300P Poly Sprayer isconstructedof high-density translucent polyethylene.

It has a funnel-top and a 3.5 gallon

capacity (3 gallon working capacity). It

comes with a 10˝ Celcon pump, brass

extension tube with adjustable nozzle,

and five feet of vinyl hose.

Multi-Purpose SprayerA 24 ounce capacity sprayer. It is ideal

for small cleaning jobs, such as window

units and water coolers.

1 each 4774-1 1 each 61231

1 each 4770-0 1 each 4770-2 1 each 4771-2

1 each 4771-3 1 each 4772-0 1 each 4768-W3

1 each 4774-0



Bio-Fresh® Fogger The Bio-Fresh Fogger is made of a one-piece, seamless heavy-duty copolymer. It uses a 48˝

flexible hose and is adjustable from 0-18 ounces per minute with the respective particle size at

20 to 80 microns. It’s ideal for spraying Cal-Fresh in duct work and large areas.

1 each 4693-0

Cal-FreshUse Cal-Fresh wherever malodors exist as it inhibits odors rather than masking them.

Cal-Fresh is specifically formulated for industrial use in treating odor problems commonly

found in air conditioners, autos, sick rooms, refrigerators, motels, nursing homes, ice makers,

hotels, evaporators, humidifiers, freezers, and trucks. Cal-Fresh is not a masking agent. It

attacks the odor at its source.


Indoor Air Quality

1 bottle (200 tablets) 4296-60

Pan-Treat®Pan-Treat condensate tablets control odors and prevent overflows caused by plugged

condensate drain lines, and can also be used in humidifiers. They are very easy to use, as well

as safe, non-corrosive, non-toxic, and biodegradable.

Gel Tabs - Condensate Drain Pan TreatmentFormulated with a breakthrough technology for treating air conditioning drain pans and lines. Keeps the drain pan from

clogging and eliminates foul and musty odors. When activated by condensation, the tablet will turn to gel and lock into place.

Dissolves continuously and completely with nothing left to remove for up to 3 months. Stack together to increase duration.

3 ton tab (12 in tube) 4185-03

3 ton tab BULK (200) 4185-04

5 ton tab (6 in tube) 4185-05

15 ton tab (1 each) 4185-15

20 ton tab (1 each) 4185-20


14/4012

Indo

orAirQuality

PurCool® Green Mini StripOne Mini Strip treats up to 5 tons. Prevents slime, sludge,

odors and overflows. For prevention of drain pan fouling and

overflow in mini splits, fan coil units, "A"coils, window units,

and other tight drain pan applications. Mini Strips can be cut

and used with multiple evaporators. Time release formula completely dissolves leaving no

residue. Utilizes unique plant based suspending and dispersing action to prevent blockages

from slime and sludge. Lasts up to 6 months!

PurCool® Green TabletOne tablet treats up to 5 tons. Prevents slime, sludge, odors and overflows. Time release

formula adheres to pan and completely dissolves. It will not float and leaves no residue.

Utilizes unique plant based suspending and dispersing action to prevent blockages from

slime and sludge. Use multiple tablets for larger systems. Lasts up to 6 months!

PurCool® Green Commercial Strips

Green product to prevent slime, sludge, odors, and overflows in commercial air handler

condensate pans. Time release formula adheres to pan and fully dissolves over time. No housing

or sock to remove. Unique green formula utilizes plant based suspending and dispersing action

to keep drain pans clean and free flowing. Lasts up to 6 months.

PurCool® StripsPurCool Strips keep A/C and refrigeration condensate drain pans clean and free flowing. Use

PurCool Strips to prevent condensate drain clogs, costly overflows, and corrosion. Just place

them anywhere in the drain pan where the PurCool Strip will contact the condensate water

and enjoy up to six months of economical protection. PurCool Strips will adhere to the drain

pan and will not float or move. Dissolves completely leaving no residue. Safe for metal and

plastic drain pans.

N u- Ca lg on C le nA ir

Treats 30 tons - 6 mos. 61040 2009

Treats 10 tons - 6 mos. 61041 2003D

Treats 5 tons - 6 mos 61042 2001D

Nu-Calgon Number ClenAir Number

PurCool Commercial Strip 10 ton 61045 PCG10T

PurCool Commercial Strip 30 ton 61046 PCG30T

Nu-Calgon Number ClenAir NumberPurCool Mini Strip 61044 PCG5MS


PurCool Green 1 tablet 61051 PCG5T

PurCool Green Bulk 61052 PCG5T-100

PurCool® Condensate Pan Treatment TabletsPurCool Tablets utilize a powerful formulation to keep condensate drain pans clean and free

flowing. Use PurCool Tablets to remove sludge and slime in A/C condensate pans to prevent

costly water damage caused by overflows. They will control clogs, build-up, odors, corrosion

in drain pans, and condensate pumps, and humidifiers. Approved for computer room

humidifiers. PurCool Tablets are completely soluble in water and biodegradable and will not

leave any deposits on surfaces.


200 PurCool Tablets 61053 PC200

PurCool Shock Tabs 61054 PCST12

ClenAir by Nu-Calgon


Treats 3 tons - 6 mos. 61043 1903D

3 tons Bulk 61047 1903D-100



CherryAir®

Odor NeutralizerCherryAir Odor Neutralizer removes odors quickly and permanently leaving a pleasant cherryfragrance behind. Using unique ClenAir odor neutralizing technology, CherryAir is a true odor

eliminator - not an odor mask like many scented products. CherryAir attacks odors caused by

fuel oil, smoke, pets, mold and mildew, cigarette and cigar smoke, decay, cleaning solvents,

and even skunks!

OrangeAir® Odor Neutralizer

OrangeAir Odor Neutralizer uses the unique ClenAir odor neutralizing technology to safely

eliminate odors, leaving a refreshingly crisp orange fragrance behind. OrangeAir is not a mask

or cover-up. It is a true odor eliminator. OrangeAir eliminates odors caused by smoke, pets,

fuel oil, mold, mildew, bacteria, cigarette smoke, water damage, fire damage, stale air, decay,

chemicals, even skunks!

The Original ClenAir™ Odor Neutralizer

ClenAir’s unique odor neutralizing formula removes odors quickly and permanently. Originally

designed for use in central air systems, on f ire and flood restoration jobs and in sewage facilities,

ClenAir is a professional product, yet it leaves no lingering antiseptic or perfume smell. Use

ClenAir gel to combat stubborn odors, even those that have built up over time like cigarette

odor or pet odors. Simply place the gel near the source of the odor or in the return duct of your

central air system. The best product available for musty basements. Great for smoke and water

damage as well as pet odors. Used by heating and air conditioning technicians, professional

duct cleaners, janitors and property management.

Nu -Calgon Cl en Air

Mini Tub 61018 CA1800M

1/2 lb. Tub Display Box 61010 1800D

1 lb. Tub 61011 1801

Nu-Calgon ClenAir


1/2 lb. Tub Display Box 61001 1500D

1/2 lb. Tub 61002 1500

1 lb. Tub 61003 1501

3 lb. Tub 61004 1503

Nu-Calgon ClenAir


1/2 lb. Tub Display Box 61020 CA1300D

1 lb. Tub 61021 CA1301

At home, school, work, or play, the quality of the indoor air that we breathe

affects the way we feel. The indoor air handler is the heart of the HVAC system.

The air handler’s cooling/heating coils, and condensate drain pan must be

properly treated and maintained in order for it to supply clean, odor free,

conditioned air to the home or building. ClenAir by Nu-Calgon’s Quality IndoorAir Program provides the products to treat the cooling/heating coils, condensate

drain pan, and HVAC system air as it passes through the air handler.

Breathe easy with ClenAir!

Nu-Calgon ClenAir

10 lb. Tub 61005 1510

30 lb. Tub 61006 1530

Wall Unit (White) 61007 1300

Gel Brick for Wall Unit (1lb.) 61008 1401

Nu -Calgon ClenAir

3 lb. Tub 61013 1803

10 lb. Tub 61015 1810

30 lb. Tub 61017 1830

Nu-Calgon ClenAir

3 lb. Tub 61023 CA1303

10 lb. Tub 61025 CA1310

30 lb. Tub 61027 CA1330


16/4014

Indo

orAirQuality

HVAC Odor Block®

ClenAir HVAC Odor Block is not a perfume mask or cover-up. The unique ClenAir formula

molecularly reacts with the airborne odor causing compounds and eliminates them and

other indoor pollutants leaving clean, fresh, air behind. The HVAC Odor Block makes it

easy to remove odors and improve the indoor air quality in the entire home or building by

treating the air through the HVAC system.• Eliminates odors and improves indoor air quality.

• Treats all home or building air through the HVAC system.

• Use in A/C units, furnaces, rooftop units, fan coil units, and air handlers.

ClenAir Liquid FormulaClenAir Liquid is a fast acting deodorizing product. It eliminates odors via an oxidation

process while leaving a fresh scent. Applications include HVACR equipment including

evaporator coils, duct work, condensate pans, refrigeration cases, reach-ins, and walk-in

boxes. It can also be poured down drains, garbage disposals, and in trash cans. Spray in

restrooms, locker rooms and on fouled carpeting, upholstery. Used by hospitals, nursing

homes, HVACR technicians.


Residential HVAC Odor Block 61060 1502

Commercial HVAC Odor Block 61061 CA1015


Unscented Spray 16 oz. 61030 1600D

Unscented Liquid 1 gal. 61031 1610

Citrus Spray 16 oz. 61033 1700D

Side Vent for Carbon Filtration

HVAC Carbon Block® In-Duct Air Purification SystemHVAC Carbon Block is an add-on Carbon purifier for all HVAC systems. Improves indoor

air quality by removing odors, indoor air pollutants, and VOC’s. Treats up to 10 tons for

6-9 months.


HVAC Carbon Block 61062 CACB10

• Animal Odors

• Food Odors

• Ozone

• Tobacco Smoke

• Formaldehyde

• Body Odors

• Paint Fumes

• Auto Exhaust

• Sewer Gases

• Burnt Odors

• Printer Gases

• Chlorine

• Turpentine

• Cosmetics

• Mercaptans

• Ammonia

• Solvents

• Alcohol

• Cleaning Chemicals

• Acetone

• VOC’s

• Smog

• Mildew

• Hospital Odors

HVAC Carbon Block® Removes Many Indoor Air Pollutants Including:

Gases

& Chemicals

Activated

Carbon

Pores

Activated Carbon Adsorbs

Gases & Chemicals

ClenAir by Nu-Calgon


Citrus Liquid 1 gal 61035 1710

CherryAir Spray 16 oz. 61037 1900D

CherryAir Liquid 1 gal. 61038 1910



Gas Leak Detector The original industry leak detector. A high viscosity liquid that forms bubbles when daubed

on a gas leak. Non-corrosive, non-staining, harmless to skin. Detects any type of gas leak such

as air, compressed air, carbon dioxide, nitrogen, natural gas, and refrigerant gases. Freeze-

protection to -20˚F. Six ounce plastic bottles have dauber in cap. USDA approved.

Cal-Blue® LT Gas Leak Detector The same high quality formulation as regular Cal-Blue Plus, but has added freeze-protection

to -20˚F. It is the ideal detector for geographical areas that may experience very cold

temperatures. NSF registered.

6 ounce bottle with dauber 4180-53 - Canadian #4832-C9



Gas Leak Detectors

8 ounce bottle with dauber 4184-53



Cal-Blue® Plus Gas Leak Detector

Cal-Blue Plus is a complete gas leak detector, freeze protected to 5˚F. Its high viscosity

formula enables it to remain in contact with the applied surface for an extended period of

time, allowing it to detect the smallest of leaks. It is also non-corrosive to metal, and it will notaffect ultraviolet or black lights. NSF registered.

Fluorescent Gas Leak DetectorA fluorescent formulation that provides improved visibility and long lasting bubbles.

It is non-corrosive to metals and is freeze protected to 5˚F. Suitable for high and low

temperature applications. Can be used for most refrigerants, natural gas and oxygen

systems. USDA approved.

6 ounce bottle with dauber 4182-53




18/4016

Emkarate RL Viscosity 1 Quart 1 Gallon 5 Gallon 53 Gallon

22H 100 SUS 4313-46

32H 150 SUS 4314-44 4314-46 4314-45 4314-41

32HB 150 SUS 4314-6232-3MAF 150 SUS 4314-64 4314-66 4314-65 4314-67

46H 200 SUS 4315-46 4315-41

68H 300 SUS 4316-44 4316-46 4316-45 4316-41

68HB 300 SUS 4316-86 4316-85

68HP 300 SUS 4316-76 4316-71

100E 500 SUS 4317-66

170H 850 SUS 4318-26 4318-25 4318-21

220H+ 1100 SUS 4318-66 4318-65 4318-61

220XL 1100 SUS 4318-75

Polyol Ester (POE) Lubricant

Emkarate® RL Lubricant

The Emkarate family of polyol ester refrigeration lubricants are designed specifically for use with HFC refrigerants. They are available

in a range of viscosities. They have excellent thermal and chemical stability, and are compatible with a wide range of elastomers,

polymeric materials, and other materials of construction. Fully miscible and compatible with mineral oils and alkylbenzene lubricants

as well as with CFCs, HCFCs and HFCs.

Polyvinyl Ether (PVE) Lubricant

Idemitsu Polyvinyl Ether LubricantPVE lubricants provide for increased stability and lubrication. They do not hydrolyze in the

presence of moisture, a very important feature in HVAC/R applications. Additionally, they

are compatible with other refrigeration oils and process fluids. PVE lubricants also exhibit

compatibility and performance with frequently used anti-wear additives.

Idemitsu Viscosity 1 Quart

FVC32D 32 SUS 4319-14

FVC68D 68 SUS 4319-24

C-3s, C-4s, C-5s Refrigeration Oil

These are mineral naphthenic lubricants manufactured by Calumet Lubricant Company and

available in three viscosities. They are specifically designed for today’s high performance

air conditioning and refrigeration compressors using CFC and HCFC refrigerants. These

compressors run at higher speeds and generate higher temperatures, and as a result, they

require better lubrication. Use of these oils will ensure continued efficient operation, providing

the important properties required from an efficient refrigeration oil.

Nu-Calgon Viscosity 1 Gallon 5 Gallon 55 Gallon

C-3s 150 SUS 4303-07 4303-05 4303-01

C-4s 300 SUS 4304-07 4304-05 4304-01

C-5s 500 SUS 4305-07 4305-01

Mineral Oil

Refrige

rationOil&VacuumPumpOil



Alkylbenzene Oil

Zerol Viscosity 1 Gallon 5 Gallon 55 Gallon

150 150 SUS 4310-07 4310-01

200TD 200 SUS 4308-07 4308-01300 300 SUS 4311-07 4311-05 4311-01

400CA 400 SUS 4311-65

500 500 SUS 4312-05

Zerol® Alkylbenzene Refrigeration OilZerol Refrigeration Oil is recommended for use in all refrigeration and air conditioning

applications using CFC and HCFC refrigerants. It is highly recommended by refrigerant and

compressor manufacturers for use with R-22 and other HCFC blends such as R-409A as it provides

many distinct advantages: excellent miscibility, excellent thermal stability, low temperature

performance compatibility with mineral oils. It is the oil of choice for R-22 and R-502.

Oil Refractometer

A precision optical instrument that allows for the rapid and accurate determination of the

refractive index of oil solutions. It will specifically assist in determining the percent residual

of oil remaining in a refrigeration system when converting it to a new refrigeration oil. Such

retrofits require converting the mineral oil to a polyol ester (POE) or polyalkylene glycol (PAG),

an alkylbenzene lubricant (Zerol®) to a POE, or a mineral oil to an alkylbenzene.

1 each 4815-0

CanVerter®A hand-held pump used to remove or add oil to hermetic compressors. Easy to use; each stroke

pumps 1 ounce of oil.

1 each 4814-0

Refrigeration Oil Products

Cal-Vac® Vacuum Pump OilNu-Calgon’s Vacuum Pump Oil is a quality, high-grade lubricant that performs at the deepest

vacuum. It has a very low vapor pressure and it has excellent lubricity for complete surface

protection. It contains no additives or detergents.

1 pint bottle 4383-34

1 quart bottle 4383-24


Vacuum Pump Oil

Refrigeration Oil Charging Pump

An oil pump for charging refrigeration oil into a system, even while it ’s running. This pump canbe used for 1 gallon, 2.5 gallon, and 5 gallon containers. Incorporates an automatic bleed valve

that keeps pressure equalized inside the container, and includes a tapered rubber adapter that

fits all container openings without the need for additional adaptors.

1 each 4814-40


20/4018

Aerosol Coil Cleaners

AerosolProducts

Nu-Blast®

A no rinse condenser coil cleaner in a convenient aerosol

package. Double action of high pressure blast and

solvent cleaning restores design efficiency of condenser

coils. It is non-flammable and non-conductive. No rinse

required - cleaning solvent evaporates completely. Use

with adequate ventilation.

Nu-Brite®

Nu-Brite is a very effective degreaser and cleaner oncondenser coils. Its high foaming characteristic will help

push soil deposits out of the coil, leaving it clean and

bright. With proper ventilation, it can also be used as

a kitchen degreaser by emulsifying stubborn, resistive

grease deposits found on coils located in kitchens. Product

should be used where adequate rinsing is possible.



Cal-Blast®

Cal-Blast is a no rinse condenser cleaner that will

powerfully separate undesirable materials from

the surface, offering maximum cleaning of finned

coils. It’s a high performance aerosol with excellent

solvency and blasting spray.


CalClean®

CalClean is a heavy duty detergent formulation

of surfactants, grease solvents, alkaline cleaners,

corrosion inhibitors, and water conditioners. Ideal

for cleaning window units as well as small evaporator

coils, air cooled condenser coils, metal filters, fan

blades and other surfaces soiled with greasy dust anddirt. NSF registered.


Blackhawk®

Blackhawk is an expanding foam coil cleaner. Formulated

to deeply penetrate the coil, it liquefies to quickly

remove grease, grime, or oily soils from deep within

the coil. Blackhawk’s formulation is safe and problem-

free for cleaning evaporator or condenser coils in an

occupied building; produces no objectional fumes. It isparticularly effective on coils on refrigerators, coolers,

and freezers located in restaurants and other commercial

establishments. NSF registered.


Evap Foam No Rinse®

Evap Foam No Rinse is a high performing, heavy dutydetergent. It is formulated with special surfactants

and alkaline cleaners that have been developed into a

foaming, no rinse product. Evap Foam is ideal for use on

most coils, but it is particularly suited for use on cooling

or evaporator coils. The aerosol can be sprayed either

right side up or upside down. NSF registered.




Aerosol Specialty Products

Nu-Shield™

Nu-Shield, the newest generation of chemistryfor protecting coils and other surfaces, is a super-

hydrophobic (water repelling) product. The non-

conductive formula has numerous applications in the

management of water on non-food, non-potable water

surfaces for the HVAC/R trade. Simply spray it on and

watch the water bead up and roll right off.

9 ounce can 4294-75

Food-Grade Silicone

Food Grade Silicone sprays a perfect non-stick surface

on ice machine surfaces, vending machines, coin slots,

slicing machines, dairy machinery, and other food

processing and packaging equipment. An excellent

lubricant that prevents binding and sticking. Contains

ingredients approved by the FDA for food contact use.

USDA approved.

Break-n-Lube™

This advanced technology 4-in-1 product is made

with CERFLON® for high performance in a non-drying

penetrating lubricant. It’s highly versatile with the

ability to penetrate, lubricate, displace moisture, and

provide superior resistance to corrosion. It’s especially

formulated to help free rusted parts and assemblies.

V-Belt Dressing

V-Belt Dressing is specially formulated to penetrate and

extend modern V-Belt life. It is particularly effective in

maintaining V-Belt efficiency and performance under

today’s increasing performance requirements. It keeps

belts pliable, prevents slippage, and does away with

squealing and chattering. USDA approved.




Aerosol Lubricants

A/C Shine® Superior Cleaner / Protectant

A/C Shine is specially formulated to clean and protect thepainted metal surfaces of outdoor A/C condensing units.

It sprays on and wipes off quickly and easily without

water. For use on all outdoor unit painted surfaces.

PenetrateHD® Super Penetrating Lubricant

Loosens rusted and frozen metal parts. Frees stuck fan blades,

blower shafts, pulleys, rusted nuts and bolts, and any frozen,

rusted, or seized metal part. Unique low surface tension

formula penetrates into the smallest spaces and breaks and

dissolves the bonds of rust and corrosion. Lubricates and

protects metals. Dielectric strength 40,000 volts.

12 ounce can 61105

17 ounce can 61106

12 ounce can - LV* 61107

17 ounce can - LV* 61108

* LV = Low VOC for California


12 oz. 61118 ACS12

BEFORE AFTER


22/4020

Pan-Spray®Pan-Spray is an effective, easy-to-use waterproof

rubberized coating that won’t chip, flake, or peel. It’s ideal

for sealing out rust and corrosion as well as repairing leaky

condensate pans, cooling towers, swamp coolers, roofing,

gutters, and down spouts. Pan Spray is the perfect

solution for emergency and permanent repair.

16 ounce can - White 4296 -50

16 ounce can - Black 4296-51

AerosolProducts

Aerosol Specialty Products

Zinc Rich Cold Galvanizing

Highly resistant to nearly all forms of corrosion. Perfect

for repairing factory galvanized material damaged in

shipment, welding, assembly, etc. Its 95% pure zinc film

fuses itself to iron, steel, or aluminum. Blends well with

hot-dip coating. Meets or exceeds Military Specifications

MIL-P- 26915A, MIL-T- 26433, MIL-P- 21035, MIL-P-46105

and the Preece Test.

Pipe-Dri®Aerosol insulation which provides a moisture barrier

to stop sweating and dripping on refrigeration lines,

air conditioning lines, and other cold surfaces. Quickly

adheres and dries to a hard waterproof coating. Pipe-

Dri makes it possible to insulate hard to reach areas.



Pump Protector

When corrosion occurs in close-tolerance areas, it can

cause the impeller to stick or bind. Pump Protector

protects seasonally operated pumps against corrosion

during shutdowns by winterizing them. It is safe for all

types of water pumps and requires no special rinsing

at start-up.

10 ounce can 4299-T8

Electrical Contact Cleaner

Cleans, lubricates, and protects electrical contactsfrom corrosion, and is safe on most plastics. Cleaning

action quickly removes greases, dust, and oxidation,

restores and maintains precision and efficiency to the

instrument and component. Includes extension tube

for pinpointing application. USDA approved.

Degreasing Solvent EF

A degreasing solvent, specially formulated for cleaningand degreasing equipment where washing or flushing

is not possible. Simply spray on and wipe off. Penetrates

quick and deep, loosening and liquefying heavy

greases and tar. Non-corrosive and non-staining with a

dielectric strength over 26,000 volts.


14 once can - LV * 4082-04



14 ounce can - LV* 4083-83


Aerosol Adhesives

Spray-n-Bond™

A wide web spray adhesive formulated specifically

for insulation and duct liner applications. Ideal

for porous surfaces, it is waterproof, flexible,

transparent, non-staining, and it can be used for

both temporary or permanent bonds. Formulated

with the environment in mind, it contains no

chlorinated solvents or ozone depleters, and it is

voc-compliant in states such as California.12 ounce can 4369-75

Spray Adhesive

Spray Adhesive is a fast-drying, all-purpose product

that provides a strong, water-resistant, flexible bond. It

is translucent and does not penetrate or soak material

causing bleed-through. Spray Adhesive is excellent

for labeling, bonding, splicing and sealing paper,

cardboard, cloth, rubber, styrofoam, canvas, leather,

wood, and most plastics.




Degreasing Solvent EFA degreasing solvent that is ozone-safe and environmentally friendly. It is a volatile solvent

that provides effective degreasing and cleaning as well as controlled drying with absolutely

no residue. It has a dielectric strength in excess of 26,000 volts.

1 gallon 4162-07

1 gallon - LV* 4162-17


Specialty Products

Quick Seal™ Pipe Repair

A permanent knitted fiberglass impregnated tape that is designed for quick, in-the-f ield repair

of leaks for all types of pipes. It can be used on both cold or hot water as well as refrigeration,

plumbing, industrial, commercial, and residential applications. It is safe for potable water and

is UL listed. ANSI/NSF Standard 61.

2 ˝ x 3´ wrap 4299-10

4 ˝ x 12´ wrap 4299-11

Thermo-Trap Paste 11 ounce tube 4371-36Thermo-Trap Gel 1 quart spray bottle 4371-32

Thermo-Trap Gel 4 fluid ounce spray bottle 4371-53

Thermo-Trap® The industry’s original heat absorbing paste designed to isolate heat encountered in

soldering, welding, and brazing, thereby preventing damage to nearby heat sensitive

controls, or fittings. USDA approved. Biodegradable. Available in paste as well as a gel.

Great WipesGreat Wipes Industrial Strength Hand Towels are waterless wipes made specifically for the air

conditioning, refrigeration, and plumbing service technician. Each premoistened, heavy duty

towel has strong pumice scrubbing power that conveniently cleans anywhere and anytime.

75 count canister 4185-75

Scrubs-In-A-Bucket® HVAC80 The original Scrubs. Disposable, pumice-performance waterless hand cleaner towels that

effectively and quickly clean hands on a wide variety of industrial soils and greases. Each self-

dispensing portable canister contains 80 perforated disposable heavy-duty towels and are

pre-moistened with the famous Scrubs cleaning formulation. Effective yet gentle to the skin.

Use anywhere, anyplace, anytime.



Visible Defects Heat Exchanger Inspection System The Visible Defects Heat Exchanger Inspection System is a complete kit that enables the

technician to better evaluate the integrity of a heat exchanger. If a crack exists, the specially

formulated fluorescent penetrant visually enhancing the crack allowing the technician to see

the defect easier.

Visible Defects Kit 4385-00

Visible Defects Replacement Solution 4385-06


24/4022

2 ˝ x 1/8 ˝ x 30´ roll 4217-12

2 ˝ x 1/8 ˝ x 30´ roll 4217-W3

Perma-Wrap™ Foam Insulation Tape

Formulated from the highest quality elastomeric thermal insulation material, and

is manufactured to meet the needs of today’s air conditioning and refrigeration

applications. Its closed cell construction seals out air and moisture, slowing down heat

transfer and providing complete insulation. Used on hot or cold water pipes, chilled

water, and refrigerant lines to prevent sweating and condensation. Service temperatures

as low as -20ºF with a high continuous temperature of 160ºF and a high intermittent

temperatures of 220ºF.

Foam-Tite®An economically priced tape formulated from quality thermal insulation material. It utilizes

closed cell construction and can be used on cold water pipes, chilled water lines and refrigerant

lines to prevent sweating and condensation. It can also be used on hot water lines, for better

insulation against heat loss. Service temperatures of -15ºF to 160ºF.

2 ˝ x 1/8 ˝ x 30´ roll 4219-12

Cork TapeFormulated and manufactured for the air conditioning and refrigeration industry, it meets and exceedsspecifications as an insulating material for preventing sweating and condensation on refrigerant lines,

cold pipes, and other commercial refrigeration and a/c systems. Also serves as an excellent insulator on

hot pipes, and used as a gasketing material, a sound-deadening material, and for wrapping valves, tees,

and fittings. Service at temperatures as low as -30ºF, as high as 200ºF and won’t sag up to 350ºF.

Cork-Tite®Designed for all types of climates, insulating cold pipes for all kinds of air conditioners in cars, homes,

freezers, and refrigerators. Helps stop condensation problems and is ideal for retarding heat gain in

cold pipes and preventing heat loss in hot pipes. An effective sound dampening material, it can also

be used for gasketing purposes, sticks to all kinds of dry metals and seals tightly without drying. It is

flexible and does not shrink or melt within the service temperature of -20ºF to +200ºF.

Insulation Products

2 ˝ x 1/8 ˝ x 30´ roll 4218-W3

2 ˝ x 1/8 ˝ x 30´ roll - Dispenser Package 4218-12InsulationProducts



Sealing and Caulking CordsSealing and Caulking Cords are nonstaining sealers formulated from the highest quality raw

materials. They are water-resistant, dust-resistant and white in color. In addition, they securely

adhere to most surfaces and provide excellent insulation value. They are available in 3/8˝ pre-

shaped extruded cords, with serrated release paper.

Thumb-Tite® This compound is formulated and manufactured for use in many sealing, insulating, and

general maintenance applications. It has excellent adhesion capability and is non-staining,

non-hardening, and unaffected by wide variations in temperature - an excellent thumbing

grade. It is packaged in 2 pound boxes, each box contains two one pound bars.

Nu-Foam®Nu-Foam is an expanding polyurethane prepolymer foam.

It is used as a sealant and insulating product on openings

created for refrigeration, air conditioning and heating tubes

or pipes, duct joints, and other areas where unwanted air

penetration might occur. Contains no CFCs nor any HCFCs,and is UL classified and f ire retardant.



2 lb. box 4216-92

3/8 ˝ x 25´ roll 4216-27

Insulation Products

2 ˝ x 1/8 ˝ x 30´ roll 4219-20

Foam Tape PEFoam Tape PE insulation tape provides an economical way to prevent sweating or condensation on

air conditioning, refrigeration, chilled water or other cold lines. It can also be used on hot water lines

for insulation against heat loss and it can be overlapped or the edges can be butted.


26/4024

Freez-Kontr’l®An expanded family of heat transfer f luids (anti-freeze) based upon non-toxic propylene

glycol. All products are fully formulated to provide optimum freeze protection as well

as corrosion protection in chilled water, hydronic and other closed systems. Safe to use

where contact with potable water is possible. (GRAS certified- generally regarded as safe.)

• Freez-Kontr’l - provides greater than -60ºF freeze protection and

greater than -100ºF burst protection

• Freez-Kontr’l 95/5 - a fully concentrated (~100%), inhibited propylene glycol product

• Freez-Kontr’l 35 - formulated with 35% propylene glycol for use as a

secondary coolant in supermarket rack applications

• Freez-Kontr’l FG - a certified USP, food grade propylene glycol product

at ~100% concentration. Inhibited. NSF registered.

Propylene Glycol

Burst-Kontr’l® AP-100A specially formulated propylene glycol heat transfer solution for use in boilers having

aluminum heat exchangers. It has corrosion inhibitors to protect aluminum, copper, solder,

brass, and steel as well. Provides burst protection to -100ºF and freeze protection to -60ºF.

5 gallon pail 4187-15

Glycol

Freez-Therm®An inhibited heat transfer fluid and anti-freeze based upon ethylene glycol. It can be used

in chilled water, hydronic, and other closed systems for both freeze point suppression and

corrosion inhibition. An uninhibited version is also available in drums on special order.




Ethylene Glycol

Freez-Kontr’l 1 gallon bottle 4188-07



Freez-Kontr’l 95/5 5 gallon pail 4188-06


Freez-Kontr’l 35 55 gallon drum 4188-35

Freez-Kontr’l FG 55 gallon drum 4188-04

Glycol/ Oil Transfer PumpHeavy-duty pump designed to transfer Freez-Kontr’l®, Freez-Therm®, or oil products (up to

1000 sus) from Nu-Calgon supplied 55 gallon drums to their application.

Glycol Equipment

Glycol RefractometerAn accurate and economical tool for ensuring proper levels of glycol treatment in HVAC

fluid systems. Removes guess work and prevents wasteful over-treatment. It has metal

body with cushioned eyepiece, focus adjustment, and a rubber hand grip. A calibration

screwdriver, calibration fluid, a plastic pipette, optical cleaning cloth, and a rugged carrying

case are included.

1 each 4817-10


1 each 61301 GLY32



Closed Systems & Steam Boilers

Ty-lon® B20

A liquid nitrite-borax corrosion inhibitor and dispersant for closed recirculating systems.

It combines corrosion inhibitors, a unique copolymer dispersant, and a color indicator to

facilitate leak detection, into a complete treatment for hot and chilled water closed systems

containing ferrous and non-ferrous metal components.5 gallon pail 7537-05

Ty-lon® B14AAn all-in-one boiler treatment product that controls scale, corrosion, and condensate line

corrosion in low pressure, low make-up steam heating boilers where 90% or more of the

condensate is returned. It is chromate-free and contains a color indicator for visual determination

of treatment residual. Its balanced formulation provides an energy efficient way of heating.


System CleanerA liquid, heavy-duty industrial alkaline cleaner specifically formulated to emulsify and clean

equipment surfaces and pipe fouled by cutting oils, grease, lubricants, corrosion products,

and other debris.


Winter Treat®Multi-treatment product for hot water and steam heating boilers and other closed water

systems. It emulsifies and cleans away rust, corrosion deposits sludge, as well as inhibits system

corrosion, foaming, surging, and lime scale. Typical use is one quart per 25 gallons of water.

1 quart bottle 4390-32



28/4026

Liquid Scale DissolverA hydrochloric (muriatic) acid formulated to remove calcium scales from cooling towers and other water-cooled equipment. It containslow-foaming corrosion inhibitors and a built-in pH color indicator to let you know when the acid has been neutralized. pH test paper

is also included. USDA approved.

1 gallon bottle 4330-08 - Canadian #4845-K8

5 gallon pail 4330-05 - Canadian #4845-PB


Season Start® “Imperial Grade” Scale RemoverA powdered sulfamic acid formulation that contains the best inhibitors available for

protecting all metals including galvanized metal. It is the best and the safest dr y acid cleaner

available. It contains a built-in pH color indicator to let you know when the acid solution has

been neutralized as well as wetting and anti-foaming agents. USDA approved.

10 lb. container 4360-88

50 lb. pail 4360-84

Low-Foaming Performance

To demonstrate its greater low-foamproperty, Liquid Scale Dissolver wasadded to a beaker containing limescale. A leading competitive liquidproduct was added to another beakercontaining an equal amount of limescale. See the difference! When cleaningtowers and evaporator condensers,low-foam is the preferred approachas high foam is dangerous to bothpersonnel and surroundings.

pH Color Indicator

Nu-Calgon’s exclusive “built-in” pH colorindicator tells you when to add moreacid, and it lets you see when the systemis clean. At working strength, the acidcleaning solution is green or light blue.When the acid solution is neutralizedand is no longer working, the solutionturns purple and more acid must thenbe added. The system is clean when thegreen color is retained for 20-45 minutes.

NeutralizedWorking

Strength

Competitive

Product withDangerous Foam

Nu-Calgon

Low-FoamingLiquid Scale Dissolver

Initial Dosage Recommendation

Tons of Horsepower Liquid Scale Dissolver Eco-Lyme Season Start

10 2 gallons 4 gallons 10 lbs.




Scale Removal

Eco-Lyme®

Eco-Lyme is a new chemistry for the HVAC/R market that provides a unique blend of

performance with a desired eco-profile. The product is specially formulated to achieve

descaling behavior of competing hydrochloric acid based chemistry descalers. However, the

active ingredient is substantially safer on equipment metals. Eco-Lyme is ideal for stainlesssteel construction to eliminate potential issues of localized corrosion/pitting caused by

repeated use of hydrochloric acid. Eco-Lyme is odorless; making it safer to use in the field.

NSF registered.

Wa

terTreatment





29/40


30/4028

Algae Prevention

Bromicide Tablets

A chlorine-bromine donating organic compound in tablet form. It slowly releases powerful

oxidizing hypohalous acids which prevent algae and slime bacteria fouling in open recirculating

cooling water systems and evaporative coolers. It also has the capability of breaking up and

removing existing biological mass from system surfaces. USDA approved and EPA-registered.

50 lb. pail 4109-M9

pH-Treat™pH-Treat is an in-line treatment product specific for the treatment of the acidic nature of

the condensate water produced by today’s high efficiency furnaces. Includes fitting kit for

easy installation.

1 each 4720-06

Humidi-Pro™Humidi-Pro is designed for humidifiers using up to 25 gallons per day and will inhibit scale for

one season. Install Humidi-Pro on the water line that supplies water directly to the humidifier.

1 each 4190-02

Other Water Treatment Products

Wa

terTreatment Corrosion Prevention

To Control Corrosion

Cal-Treat No. 233 Required per Month Bleed-off for Most Corrosive Waters Capacity of System in Tons of Horsepower

1/3 gallon 1/10 gpm 10

1 gallon 1/4 gpm 30

2 gallons 3/8 gpm 50

3 gallons 1/2 gpm 90

Cal-Treat® No. 233A liquid formulation that is used for controlling severe corrosion in evaporative condensers

and cooling tower systems. It is based upon a synergistic formulation of zinc, molybdate, and

organic phosphonate. Provides superior corrosion control and inhibits scale accumulation.


6Rsp Micromet®

Food-grade phosphate specifically formulated for inhibiting scale in ice machines and other

equipment using low volumes of water. It is used in Nu-Calgon scale controlling cartridges and

requires replacement once every 6 months. Typical dosage is 8 ounces per 500 pounds of ice

(50 gallons of water) a day. USDA approved. NSF registered.

50 lb. pail 4265-50



Conductivity MeterA hand held conductivity meter with built-in cell and automatic temperature compensation.

It has an easy to read digital meter (in micromhos, 0-10,000) and dual point calibrations.

1 each 4812-0

No. 215 and No. 1075 Drip Feeders

Used for feeding No. 340 Liquid Scale Inhibitor, Cal-Treat 233, Ty-Ion C70 and No. 85

Algaecide. Calibrated at the factory to ensure accurate feeding. Provides the benefits of

continuous treatment for small systems without the high cost usually associated with

automatic feeding equipment.

No. 215 Drip Feeder 4669-W3

No. 1075 Drip Feeder 4670-W3

No. 20L and No. 100L FeedersSteel tanks suitable for pressures up to 150 psi and temperatures up to 212ºF. Uses 3/4 inch

FNPT connections for installing on bypass to any size line. Use No. 20L Feeder for initial charges

up to 20 pounds (or 2 gallons). Use No. 100L Feeder for initial charges up to 100 pounds (or 10

gallons). Inlet/outlet strainers not included.

No. 20L Feeder 4628-0

No. 100L Feeder 4650-0

Jug Holders These should be used when drip feeding any of Nu-Calgon’s liquid water treatment products.

Once secured to the cooling tower or evaporative condenser, they will hold the 1 or 5 gallon

containers in the proper position.

1 gallon holder 4606-0

5 gallon holder 4607-0

CMS III and CMS-IV Cooling Tower Monitor SystemFor monitoring conditions in cooling towers and evaporative condensers. Provides subsequent

bleed-off and chemical feed. It features a combination monitor and pump engineered into

one-piece digital equipment. Complete system includes a solenoid valve.

CMS III 4608-0

CMS IV 4608-4

Other Water Treatment Products


32/4030

Liquid Ice Machine Cleaner

Liquid Ice Machine Cleaner is a food-grade phosphoric acid that is fast acting, yet safe to use. It has been

formulated to remove scale deposits from ice machines and coffee urns. It does not give off any harsh

fumes or contain chlorine or chlorides that would attack stainless steel. USDA approved. NSF registered.

Ice Guard® AP

Ice Guard AP contains advanced nano-titanium technology formulated to inhibit the growth of a wide

variety of slime-forming bacteria and algae found in ice machines. Ice Guard AP provides 3-6 months

protection for machines up to 1200 lbs. of ice per day. Mini Ice Guard AP that is designed to fit in machines

with smaller sumps. It provides 3-4 months protection in machines up to 400 lbs. of ice per day.

Ice Guard® AP 4209-06

Mini Ice Guard® AP 4209-05

Nickel-Safe Ice Machine Cleaner

The original Nickel-Safe Ice Machine Cleaner. It is a food-grade citric-phosphoric acid product for removing

scale deposits from ice machines having nickel-plated or tin-plated evaporators, and it is acceptable foruse in all ice machines containing nickel. It mixes to form a green solution which makes rinsing easier.

USDA approved.

Water Filtration - Maintenance

Plum

bingProducts Plumbing Products

Calci-Solve

Remove scale from lines and clear clogged drains easily and effectively with Calci-Solve. The product includes

a special inhibitor that coats the inside of the pipes with a protective film, allowing the acid in Calci-Solve to

quickly dissolve calcium, magnesium, sodium, lime, rust, and other elements without harming pipes.

Drain SolveIdeal for condensate pan drains. Drain Solve saves time and money with its ease of use. It eliminates

application concerns associated with more reactive, fuming drain openers. Simply pour it down the drainand let it work without fear of noxious fumes or reactions. Does not contain sulfuric acid.

1 quart 4134-24

1 gallon 4134-08

1 quart 4165-24

1 gallon 4165-08

A/C Drain Sucker®A/C condensate drain pan overflows are a very common and costly service problem. The overflows are

caused by slime and sludge that builds up and clogs the drain line. The A/C Drain Sucker quickly removes the

clog and the excess water, resolving the overflow problem. The kit includes PurCool® Shock Tablets to clean

and treat the remaining slime and sludge in the pan and lines, and a PurCool® Pan Strip to provide months

of preventive treatment and free flowing drains, and all fittings & hoses for suction or pressure applications.

16 fluid ounce bottle 4287-34 - Canadian #4841-AB


8 fluid ounce bottle 4207-47 - Canadian #4834-C71 gallon bottle 4207-08 - Canadian #4834-08


A/C Drain Sucker Kit A/C Drain Sucker Kit 61308 CADS1

PurCool Shock Tabs 61054 PCST12PurCool Pan Strip - treats 3 tons - 6 mos. 61043 1903D

WaterFiltration

Mainte

nance



Micro-Plus® & Micro-Carbon 4 The complete all-in-one treatment for ice machines, coffee urns and

brewers, humidifiers, steamers, etc. The Micro-Plus “in-line” filters

contain 6R Micromet® to control scale, high-grade activated carbon for

eliminating objectionable tastes and odors, and filter discs to remove

silt and sediment down to 20 microns. Available in four sizes with

1/4˝ FPT connections. When properly sized, each filter will last up to 6

months. The Micro-Carbon 4 is available for removing objectionable

tastes and odors.

Micro-Plus 2 4615-W3

Micro-Plus 4 4612-W3Micro-Plus 8 4613-Y8

Micro-Plus 16 4614-Y8

Micro-Carbon 4 4617-24

The CTL Series The CTL Series contains a matching product for the Tri-Liminator Filtration System with

specifications that are nearly identical. For example, the CTL’s primary cartridge (C0070) will

replace both the K00070 and K00174 cartridges, and it has more scale control ability than either

of the Tri-Liminator cartridges. Part numbers are easily crossed over: CTL10 replaces the Tri-L10.

CTL 220 4610-30

Prefilter 4621-43

Primary Cartridge - CG5-20S 9108-27

CFS Filtration SystemA family of replacement cartridges and manifolds designed to service existing CUNO® CFS installations.

A cost-effective water filtration system for food service applications: ice machines, fountain beverages, steam ovens, and drinking water.

These systems offer manifold and sanitary quick change cartridges to fit the existing CUNO CFS brand installations and can also support

new filtration installations. Nu-Plus CFS is the reliable choice for water filtration to prevent unwanted troubles caused by sediment, scale, or

taste & odor existing in CUNO installations.

Sediment – 5 Micron 4623-10

Sediment – 5 Micron / Phosphate 4623-11

Carbon Block - .5 Micron 4623-12

Carbon Block - .5 Micron / Phosphate 4623-13

Water Filtration

Water Filtration - OEM Replacements

Application Micro-Plus 2 Micro-Plus 4 Micro-Plus 8 Micro-Plus 16 Micro-Carbon 4

Water (per day) 12.5 gallons 25 gallons 50 gallons 100 gallons 50 gallons

Ice (per day) Up to 125 lbs. Up to 250 lbs. Up to 500 lbs. Up to 1000 lbs. ---

Coffee (per week) 25 lbs.(1,250 cups) 50 lbs. (2,500 cups) 100 lbs. (5,000 cups) 200 lbs. (10,000 cups) ---

Single Head 4623-01

Twin Head 4623-02

Triple Head 4623-03

Twin Series 4623-06


34/4032

NP Series Brackets

Some installations may require two or three NP Series housings to meet more than one

specific water-related condition. This custom installation can be accomplished through the

use of one of the NP Series multi-housing brackets.

NP48PS 4717-87

6R Micromet® Cartridge

The NP246R Micromet Cartridge contains 1 pound of 6R Micromet, and it fits the NP24DD

Housing. The NP486R Cartridge contains 2 pounds of 6R and fits the NP48DD Housing, with

10 micron filtration.

Carbon Block Cartridge The NP24C Cartridge fits the NP24DD Housing while the NP48C fits the NP48DD. These carbon blocks

will remove most objectionable tastes and odors and are rated to remove particulate to 10 microns.

6R Micromet®/Carbon CartridgeA custom cartridge, combining 6R Micromet for scale-control and a carbon block for sediment

(10 microns), taste and odor control.

NP Series Housings These housings are designed to hold one of the NP Cartridges used to f ilter water for ice

machines, coffee urns, and other beverage equipment. The NP24DD and NP48DD Housings

can be charged with specific “NP24” or “NP48” cartridges for controlling scale, sediment, or

objectionable tastes and odors. The NP24DD is equipped with 3/8˝ FPT connections and

handles up to 4.0 gpm. The NP48DD is equipped with 1/2˝ FPT connections and can handle

flow rates up to 5.0 gpm.

NP24PC 4706-87

NP48PC 4716-87

NP24C 4701-87

NP48C 4711-87

Sediment Cartridge The NP24S (5˝) and the NP48S (10˝) are made from FDA-approved polypropylene construction

and filter to 5 microns. In addition, the 10˝ as well as a 20˝ version are available in bulk packaging.

6R Micromet®/Sediment CartridgeAnother custom cartridge within the NP Series, consisting of polypropylene for filtration

(5 microns) and phosphate for scale-control.

Two housing brackets NP2BR

Three housing brackets NP3BR

NP24DD 4704-24

NP48DD 4714-24

NP246R 4705-87

NP486R 4715-87

NP24S 4702-87

NP48S 4712-87

20 ˝ Bulk 4621-43

Problem to Solve Daily Capacities

Cartridge Type Sediment Taste & Odor Scale “24’s” “48’s”

“S” Cartridges 4 1800 lbs. (200 gal.) 3600 lbs. (400 gal.)

“C” Cartridges 4 4 1800 lbs. (200 gal.) 3600 lbs. (400 gal.)

“6R” Cartridges 4 4 900 lbs. (100 gal.) 1800 lbs. (200 gal.)

“PC” Cartridges 4 4 4 600 lbs. (65 gal.) 1200 lbs. (135 gal.)

“PS” Cartridges 4 4 550 lbs. (60 gal.)

Water Filtration - NP Series

W

aterFiltration



Systems

Nu-Plus E Series by Everpure Coldrink/Insurice Systems The Coldrink/Insurice manifolds can be used with any Nu-Plus by Everpure cartridges. I.E. the

MC2 or XC2 for carbonated beverages or i20002 or i40002 for ice machines. Utilize the systemsexisting 10" or 20" pre-filter on a single, twin, triple, or quad manifold. Systems come with the

initial EC110 or EC210 pre-filter cartidge. Just purchase the appropriate Nu-Plus by Everpure

cartridge for your application.

Nu-Plus E Series by Everpure High Flow CSR Manifold with Prefilter

Utilizing the nu-MC2 or the nu-XC2 cartridges, this system provides premium quality water to

high flow fountain dispensers, coffee makers and ice machines. New and improved Micro-

Pure II media inhibits the growth of bacteria. High Flow CSR reduces chlorine taste and odor

and other offensive contaminants that can adversely effect the taste of beverages. Precoatsubmicron technology reduces dirt and particles as small as 1/2 micron and reduces health

contaminants such as cysts. Additionally, the SRX Housing inhibits scale when it is equipped

with scale-inhibiting IMF-10 ScaleSticks®.

High Flow CSR Manifold with Prefilter

Twin Triple Quad

10˝ 9294-02 9294-03 9294-04

20˝ 9294-22 9294-23 9294-24

Kleensteam CT and Kleensteam IIEverpure’s second generation water treatment system for steam applications.

Kleensteam is a total system delivering high quality filtered water with scale inhibition as well

as deliming capabilities. The dual cartridge design provides enhanced performance for low and

high flow capacity steamers and flexibility for expanding to meet future needs. Kleensteamalso reduces chlorine-induced corrosion. It’s simple to install, operate, and maintain.

Kleensteam CT 1.67 gpm max. flow 9797-50

Kleensteam II 2.5 gpm max. flow 9797-21

Coldrink/Insurice Manifold with Prefilter

Single Twin Triple Quad

10˝ 9293-01 9293-02 9293-03 9293-04

20˝ 9293-21 9293-22 9293-23 9293-24

QL3B Single System Head

Used with any Nu-Plus® E Series filters. Head includes a water shut-off

valve with mounting bracket and screws. (3/8˝ NPT)

1 each 4621-07

QC7I HeadsIdeal for all Nu-Plus® E Series filters. Head includes a shut off, flushing

valve, and outlet pressure gauge on a box bracket design.

Single Head 4621-01Twin Parallel Head 4621-02

Triple Parallel Head 4621-03

Quad Parallel Head 4621-04

Nu-Plus® by Everpure® Heads

*Everpure® is a trademark of Everpure, Inc., Westmont, IL.


36/4034

WaterFilt

ration

NuPlus

byEverpure

Cartridges

nu-i20002 and nu-i40002

Reduces water-related ice machine problems caused by dirt, objectionable tastes and odor

and scale build-up. Pre-coat submicron filtration reduces particles as small as 1/2 micron along

with chlorine and other offensive contaminants. In addition, both cartridges use 6R Micromet®,

a highly acclaimed scale inhibitor that inhibits scale build-up caused by dissolved minerals. NSF

registered under NSF/ANSI Standards 42 and 53.

• Pre-coat filtration with Micro-Pure® II antibacteria l protection

• Premier 6R Micromet scale control

• Cyst and asbestos fibers reduction

• Sanitary quick-change cartridge replacement

nu-MC2 and nu-XC2

Reduces chlorine taste, odor and other offensive contaminants that can adversely affect the

taste of fountain beverages. Pre-coat submicron filtration reduces particles as small as 1/2

micron, and it helps retain carbonation in drinks. NSF registered under NSF/ANSI Standards

42 and 53.

• Pre-coat filtration with Micro-Pure® II antibacterial protection• Reduces objectionable tastes and odors

• Cyst and asbestos fibers reduction

• Sanitary quick-change cartridge replacement

nu-i20002 4621-10

Capacity: 9,000 gallons • 750 lbs. for most cubers • 1,500 lbs. for most flakers

nu-i40002 4621-11

Capacity: 12,000 gallons • 1,000 lbs. for most cubers • 2,000 lbs. for most flakers

nu-MC2 4621-20

nu-XC2 4621-21

Capacity: 9,000 gallons


BH2 and OCS2 Cartridge

• Delivers premium quality water for ice and coffee applications

• Designed for applications where the i20002 is too long

• Precoat submicron particulate reduction• Inhibits scale formation

• Taste & odor reduction

• NSF registered under NSF/ANSI Standard 42 and 53.

BH2 4621-12

OCS2 9618-07

Capacity: 3,000 gallons or 6,000 pots of coffee • 0.5 gpm max. flow

Capacity: 1,500 gallons or 3,000 pots of coffee • 0.5 gpm max. flow

OW200L and OW4Plus Cartridge• Ideal for office or residential water systems

• Unique filter blend uses activated carbon to reduce chlorine taste, odor, and other

offensive contaminants

• Reduces lead to below the Federal Action Level of 10 ppb

• Precoat submicron technology reduces dirt and particles as small as 1/2 micron

• Inhibits scale build-up in water-using appliances

• NSF registered under NSF/ANSI Standards 42 and 53

OW200L 9619-06

OW4PLUS 9635-06

Capacity: 480 gallons





Cartridges


7CB5 9618-16

4CB5 4621-32


4CB5, 7CB5, 4CB5-S, and nu-7CB5-S CartridgeCarbon Block filter finely polishes water for high quality beverages and food applications.

NSF registered under NSF Standard 42.

• Problem-solving cartridge for high particulate or low flow water pressure areas

• Taste and odor, chlorine reduction

• Particulate reduction to 5 micron

• 4CB5-S, and nu-7CB5-S cartridges control scale

nu-7CB5-S 4621-30


4CB5-S 4621-31



7FC5 9693-61

4FC5 9693-21


4FC5, 7FC5, 4FC5-S, and 7FC5-S Cartridge

New Fiberdyne™ II media with Agion® antimicrobial protection to inhibit potential bacterialgrowth. Balanced for optimum performance in varying water qualities. Helps retain the

drink’s carbonation.

• Increased capacity 25,000 gallons


• Particulate Reduction

• NSF Standards 42 and 53

• 2.5 gpm flow rate

• 5 Micron Rating

• Scale Inhibition (4FC5-S and 7FC5-S)

7FC5-S 9693-71


4FC5-S 9693-31


4FC, 7FC, 4FC-S, and 7FC-S Cartridge

New Fiberdyne™ II media with Agion® antimicrobial protection to inhibit potential bacterial

growth. Balanced for optimum performance in varying water qualities. Improves the taste of

fountain drinks and helps retain the drink’s carbonation.


• Particulate reduction

• 2.5 gpm flow rate

• 0.5 Micron Rating

• NSF Standards 42 and 53

• Scale Inhibition (4FC-S, and 7FC-S only)

7FC 9692-61


7FC-S 9692-71


4FC 9692-21


4FC-S 9692-31



38/4036

WaterFiltration

NuPlus

byEverpure


7CLM Cartridge

Reduces chloramines, chlorine taste and odor and other offensive contaminants that can

adversely affect the taste of beverages. The cartridge reduces particles down to 1/2 micron

and reduces cysts and Giardia. Improves the taste of fountain beverage and helps retain the

drink’s carbonation. NSF registered.

• Chloramine reduction• Chlorine reduction

• Cyst reduction• Particulate reduction

4SI and 7SI CartridgeSpecially designed for ice machines. This cartridge does not include carbon. The cartridge

reduces sediment and particulate down to 1/2 micron and reduces cyst and Giardia. The filter

allows chlorine to pass through which helps reduce slime and bacteria growth inside the ice

machine and ice bin. Ideal for food service operations where baking of bread and pastries is

done on-site.

• Scale inhibition

• Particulate reduction

• Cyst reduction

• 0.5 micron rating

• NSF Std 42 and 53

Cartridges

7SI 9606-01

Capacity: 25,000 gallons • 3.5 gpm flow rate

7CLM 9693-01

Capacity: 3,600 gallons at 1.7 gpm, 5,500 gallons at 1.33 gpm

4SI 9606-51

Capacity: 15,000 gallons • 2.0 gpm flow rate

Nu-Plus® CU and Nu-Plus CU-S The Nu-Plus E Series CU and CU-S cartridges are replacements that are compatible with the

CUNO Series CFS 8000 filter cartridges. Both incorporate a carbon block filter that reduces

objectionable tastes and odors as well as chlorine and other contaminates, providing highquality beverage and ice. They also reduce extra fine dirt as small as 5 microns. Additionally,

the CU-S provides for the reduction of scale form

nu-calgon product catalog - canadian

Documents