Sold as kit Including:

Aluminum Profile - 8 ft (98 7/16”)

Diffuser - 8ft (98 7/16”)

End Caps - 4 Pieces

Mounting Bracket - 4 Pieces

*Suspension kit optional

Type: Built-In

Light Source: Module 1.4

Color Temperature: 2700k/4000k

Lumen Output: 384 lm/ft

Power Consumption: 7.4 w/ft

Dimming and Non-Dimming

Dimming set to (0-10) or (1-10)

(855) 960-0606

www.centerlight.com/vs6332.IES

Designed in California by CENTERLIGHT.COM

VS. 6332Linear Fixture

! “Prior to instalation, choose a location for the power supply and make sure that it is connected to the light switch or a lighting system.”

Installation Instructions

Prepare the surface for

installation of the fixture.

1 Make the electrical

connection to the power

supply and then run the

wires to the location of the

light fixture.

2 Drill a hole into the fixture for

low voltage wires.

3

Secure the end caps and

install the mounting

brackets.

4 Install the fixture into the surface and

run the wires through the hole.

5 Secure the mounting brackets.6

PHOTOMETRIC

Instructions for the connection of electrical wires for fixtures longer than 8ft (98 7/16”)

Install the DreamLED strip on the

fixture surface and connect the

electrical wires

7 Install the diffuser.8 The fixture is ready for use. Enjoy

the light!

9176

352

529

705

1

2

Maximum Candela = 704.78 Located At Horizontal Angle = 0, Vertical Angle = 0# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.)