ns-p-serie
DESCRIPTION
sensorTRANSCRIPT
-
HL-Planartechnik GmbH Hauert 13, D - 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020
Internet: http://www.hlplanar.com E-Mail: [email protected]
NS-5/P Single Axis Inclinometer
1 +Ub Supply Voltage 2 GND Ground 3 Earth Earth 4 Output
Analogue Ux +/- 1.5V ratio metrically around about GNDx
5 GNDx Ground for analog voltage signal Ux 6 Input
digital RS232 RxD
7 Output digital RS232
TxD
Specifications
Range: 5 Percision: analogue: digital:
+/- 0.05 +/- 0.01
Resolution: 0.0005 Temperature stability:
Zero point: Sensitivity:
< 5*10-4/C < 1*10-3/C
Analog Output: +/- 1.5V around GNDx
Digital Output: RS-232 in degrees
Transmission rate: 2400 or 9600 Baud Format: ASCII Operating temp. Range: Storage temp. Range:
-25C ... +85C -40C +85C
Supply voltage: +5VDC ...+ 24VDC Current consumption: ca. 35 mA Protection class: IP 65 Connection: Connector or Pigtail
Pinout
Dimensions (mm)
The NS-5/P single-axis inclinometer is a member of a family of high performance, competitively priced, single and dual-axis inclinometers. The heart of every HL Planartechnik inclinometer is a small, state-of-the-art, inclination sensor. The sensor, which is comprised of a molded, ceramic case bonded, via a glass sealing process, to a ceramic substrate. Thin film, platinum electrodes are deposited on the substrate. Then the chamber is partially filled with electrolytic fluid and hermetically sealed. The molded, ceramic, sensor housing combined with a precise, planar electrode geometry yields excellent performance and consistent part-to-part uniformity. All P-type inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or analog voltage output. With their machined, aluminum baseplate and IP 65 housing, they are an ideal choice for a variety of industrial, automotive and aerospace applications.
Applications Advantages Zero point detection Wide range of
application Aligning and level
control Low vibration
sensitivity Angle
measurement Higher Precision
2
3 4
5
6
1 7
40
90
75
4,3
60
1,5
1,5 40
3,5
5,5
25
Stand: 29.06.01 Design: Zn
-
HL-Planartechnik GmbH Hauert 13, D - 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020
Internet: http://www.hlplanar.com E-Mail: [email protected]
NS-5/PI Inclinometer
1 +Ub Supply Voltage 2 GND Ground 3 Earth Earth 4 GNDx Ground for analogue current output signal Ix 5 Output
Analogue Ix 20 mA (-5) to 4 mA (+5)
6 Input digital RS232
RxD
7 Output digital RS232
TxD
Specifications
Range: 5 Percision: analogue: digital:
+/- 0.05 +/- 0.01
Resolution: 0.0005 Temperature stability:
Zero point: Sensitivity:
< 5*10-4/K < 1*10-3/K
Analog Output: (*)
20 mA (-5) to 4 mA (+5)
Digital Output: In degrees Transmission rate: 2400 or 9600 Baud Format: ASCII Operating temp. Range: Storage temp. Range:
-25C ...+85C -40C +85C
Supply voltage +7 ...+ 24VDC Current consumption ca. 35 mA Protection class IP 65 Connection: Connector or Pigtail
Pinout
Dimensions (mm)
2
3 4
5
6
1 7
40
90 75
4,3
60
1,5
1,5 40
3,5
5,5
25
The NS-5/PI single-axis inclinometer is a member of a family of high performance, competitively priced, single and dual-axis inclinometers. The heart of every HL Planartechnik inclinometer is a small, state-of-the-art, inclination sensor. The sensor, which is comprised of a molded, ceramic case bonded, via a glass sealing process, to a ceramic substrate. Thin film, platinum electrodes are deposited on the substrate. Then the chamber is partially filled with electrolytic fluid and hermetically sealed.
The molded, ceramic, sensor housing combined with a precise, planar electrode geometry yields excellent performance and consistent part-to-part uniformity.
All Pl-type inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or 4-20 mA current output. With their machined, aluminum baseplate and IP 65 housing, they are an ideal choice for a variety of industrial, automotive and aerospace applications.
Applications Advantages Zero point detection Wide range of
application Aligning and level
control Low vibration
sensitivity Angle
measurement Higher Precision
Stand: 06.06.05 Design: Zn
(*) Impedance:
Type NS-5/PI Standard version ZA
-
HL-Planartechnik Hauert 13, D - 44 227 Dortmund, Tel.: +49 (0) 23
Internet: http://www.hlplanar.com E-M
NS-5/P2 Dual Axis Inclinometer
1 +Ub Supply Voltage 2 GND Ground 3 Earth Earth 4 n.c. n.c. 5 6
7
S
Range: 5 Percision: digital:
+/- 0.01
Resolution: 0.0005 Temperature stability:
Zero point: Sensitivity:
< 5*10-4/K < 1*10-3/K
Output signal: Digital RS 232
In degrees
Transmission rate: 2400 or 9600 Baud Format: ASCII Operating temp. Range: Storage temp. Range:
-25C ...+85C -40C ...+85C
Supply voltage: +5VDC ...+ 24VDC Current consumption: ca. 35 mA Protection class: IP 65 Connection: Connector or Pigtail
Pinout
Dime
2
3 5
6
1 7
60
9075
4,3
1,5
1,5 40
3,5
5,5
45
The NS-5/P2 dual-axis inclinometer is a member of a family of high performance, competitively priced, single and dual-axis inclinometers. The heart of every HL Planartechnik inclinometer is a small, state-of-the-art, inclination sensor. The sensor, which is comprised of a molded, ceramic case bonded, via a glass sealing process, to a ceramic substrate. Thin film, platinum electrodes are deposited on the substrate. Then the chamber is partially filled with electrolytic fluid and hermetically sealed. The molded, ceramic, sensor housing combined with a precise, planar electrode geometry yields excellent performance and consistent part-to-part uniformity. P-type dual axis inclinometers are microprocessor ontrolled transducers capable of producing a
inearized RS-232 digital output. With their machined, luminium baseplate and IP 65 housing, they are an
deal choice for a variety of industrial, automotive and erospace applications.
Applications Advantages Zero point detection Wide range of
application
4
claia
Aligning and level control
Low vibration sensitivity
Angle Higher Precision pecificationsn.c. n.c. Input digital RS232
RxD
Output digital RS232
TxD
nsions (mm) 60GmbH 1/97400, Fax.: +49 (0) 231/974020 ail: [email protected]
Stand: 29.06.01 Design: Zn
-
HL-PlanarteHauert 13, D - 44 227 Dortmund, Tel.: +49
Internet: http://www.hlplanar.co
NS-15/P Single Axis Inclinometer
1 +Ub Supply Voltage 2 GND Ground 3 Earth Earth 4 Output
Analogue Ux +/- 1.5V ratio metrically around about GND
5 6
7
Specifications
Range: 15 Percision: analogue: digital:
+/- 0.05 +/- 0.01
Resolution: 0.001 Temperature stability:
Zero point: Sensitivity:
< 5*10-4/C < 1*10-3/C
Analog Output: +/- 1.5V around GNDx
Digital Output: RS-232 in degrees
Transmission rate: 2400 or 9600 Baud Format: ASCII Operating temp. Range: Storage temp. Range:
-25C ... +85C -40C +85C
Supply voltage: +5VDC ...+ 24VDC Current consumption: ca. 35 mA Protection class: IP 65 Connection: Connector or Pigtail
Pinout
Dim
The NS-15/P single-axis inclinometer is a member of a family of high performance, competitively priced, single and dual-axis inclinometers. The heart of every HL Planartechnik inclinometer is a small, state-of-the-art, inclination sensor. The sensor, which is comprised of a molded, ceramic case bonded, via a glass sealing process, to a ceramic substrate. Thin film, platinum electrodes are deposited on the substrate. Then the chamber is partially filled with electrolytic fluid and hermetically sealed. The molded, ceramic, sensor housing combined with a precise, planar electrode geometry yields excellent performance and consistent part-to-part uniformity. All P-type inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or analog voltage output. With their machined, aluminum baseplate and IP 65 housing, they are an ideal choice for a variety of industrial, automotive and aerospace applications.
Applications Advantages Zero point detection Wide range of
2
3 5
6
1 7
40
90
75
4,3
60
1,5
1,5 40
3,5
5,5
25
application Aligning and level
control Low vibration
sensitivity Angle
measurement Higher Precision
4 GNDx Ground for analog voltage signal Ux Input digital RS232
RxD
Output digital RS232
TxD
ensions (mm) chnik GmbH (0) 231/97400, Fax.: +49 (0) 231/974020
m E-Mail: [email protected] Stand: 28.06.01 Design: Zn
-
HL-Planartechnik GmbH Hauert 13, D - 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020
Internet: http://www.hlplanar.com E-Mail: [email protected]
NS-15/PI Single Axis Inclinometer
Specifications
Range: 15 Percision: analogue: digital:
+/- 0.05 +/- 0.01
Resolution: 0.001 Temperature stability:
Zero point: Sensitivity:
< 5*10-4/C < 1*10-3/C
Analog Output: Analog current: (*)
20mA(-15) to 4mA(+15)
Digital Output: RS-232 in degrees Transmission rate: 2400 or 9600 Baud Format: ASCII Operating temp. Range: Storage temp. Range:
-25C ... +85C -40C +85C
Supply voltage: +7 ...+ 24VDC Current consumption: ca. 35 mA Protection class: IP 65 Connection: Connector or Pigtail
Pinout
Dimensions (mm)
The NS-15/PI, single-axis inclinometer is a member of a family of high performance, competitively priced, single and dual-axis inclinometers. The heart of every HL Planartechnik inclinometer is a small, state-of-the-art, inclination sensor. The sensor, which is comprised of a molded, ceramic case bonded, via a glass sealing process, to a ceramic substrate. Thin film, platinum electrodes are deposited on the substrate. Then the chamber is partially filled with electrolytic fluid and hermetically sealed.
The molded, ceramic, sensor housing combined with a precise, planar electrode geometry yields excellent performance and consistent part-to-part uniformity.
All Pl-type inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or 4-20 mA current output. With their machined, aluminum baseplate and IP 65 housing, they are an ideal choice for a variety of industrial, automotive and aerospace applications.
Applications Advantages Zero point detection Wide range of
application Aligning and level
control Low vibration
sensitivity Angle
measurement Higher Precision
2
3 4
5
6
1 7
40
90 75
4,3
60
1,5
1,5 40
3,5
5,5
25
Stand: 06.06.05 Design: Zn
1 +Ub Supply Voltage 2 GND Ground 3 Earth Earth 4 GNDx Ground for analogue current output signal Ix 5 Output
Analogue Ix 20 mA (-15) to 4 mA (+15)
6 Input digital RS232
RxD
7 Output digital RS232
TxD
(*) Impedance:
Type NS-15/PI Standard version ZA
-
HL-PlanartecHauert 13, D - 44 227 Dortmund, Tel.: +49 (
Internet: http://www.hlplanar.com
NS-15/P2 Dual Axis Inclinometer
1 +Ub Supply Voltage 2 GND Ground 3 Earth Earth 4 n.c. n.c. 5 6
7
Range: 15 Percision: digital:
+/- 0.01
Resolution: 0.001 Temperature stability:
Zero point: Sensitivity:
< 5*10-4/K < 1*10-3/K
Digital Output :
RS 232 in degrees
Transmission rate: 2400 or 9600 Baud Format: ASCII Operating temp. Range: Storage temp. Range:
-25C ...+85C -40C ...+85C
Supply voltage: +5VDC ...+ 24VDC Current consumption: ca. 35 mA Protection class: IP 65 Connection: Connector or Pigtail
Pinout
Dim
2
3 5
6
1 7
60
90 75
4,3
1,5
1,540
3,5
5,5
45
The NS-15/P2 dual-axis inclinometer is a member of a family of high performance, competitively priced, single and dual-axis inclinometers. The heart of every HL Planartechnik inclinometer is a small, state-of-the-art, inclination sensor. The sensor, which is comprised of a molded, ceramic case bonded, via a glass sealing process, to a ceramic substrate. Thin film, platinum electrodes are deposited on the substrate. Then the chamber is partially filled with electrolytic fluid and hermetically sealed. The molded, ceramic, sensor housing combined with a precise, planar electrode geometry yields excellent performance and consistent part-to-part uniformity. All P-type inclinometers are microprocessor ontrolled transducers capable of producing a
inearized RS-232 digital output. With their achined, aluminum baseplate and IP 65 housing,
hey are an ideal choice for a variety of industrial, utomotive and aerospace applications.
Applications Advantages Zero point detection Wide range of
application
4
clmta
Aligning and level control
Low vibration sensitivity
Angle measurement
Higher Precision hn0 Specificationsn.c. n.c. Input digital RS232
RxD
Output digital RS232
TxD
ensions (mm) 60 ik GmbH ) 231/97400, Fax.: +49 (0) 231/974020 E-Mail: [email protected]
Stand: 28.06.01 Design: Zn
-
HL-Planartechnik GmbH Hauert 13, D - 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020
Internet: http://www.hlplanar.com E-Mail: [email protected]
NS-45/P Single Axis Inclinometer
1 +Ub Supply Voltage 2 GND Ground 3 Earth Earth 4 Output
Analogue Ux +/- 1.5V ratio metrically around about GND
5 GNDx Ground for analog voltage signal Ux 6 Input
digital RS232 RxD
7 Output digital RS232
TxD
Specifications
Range: 45 Percision: analogue: digital:
0.05 0.05
Resolution: 0.003 Temperature stability: Zero point: Sensitivity: (up to 30)
< 2*10-3/K < 5*10-3/K
Analog Output: 1.5V around GNDx
Digital Output: RS-232 in degrees Transmission rate: 2400 or 9600 Baud Format: ASCII Operating temp. Range: Storage temp. Range:
-25C ... +85C -40C +85C
Supply voltage: + 7 ...+ 24VDC Current consumption: ca. 35 mA Protection class: IP 65 Connection: Connector or Pigtail
Pinout
Dimensions (mm)
The NS-45/P single-axis inclinometer is a member of a family of high performance, competitively priced, single and dual-axis inclinometers. The heart of every HL Planartechnik inclinometer is a small, state-of-the-art, inclination sensor. The sensor, which is comprised of a molded, ceramic case bonded, via a glass sealing process, to a ceramic substrate. Thin film, platinum electrodes are deposited on the substrate. Then the chamber is partially filled with electrolytic fluid and hermetically sealed.
The molded, ceramic, sensor housing combined with a precise, planar electrode geometry yields excellent performance and consistent part-to-part uniformity.
All P-type inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital or analog voltage output. With their machined, aluminum baseplate and IP 65 housing, they are an ideal choice for a variety of industrial, automotive and aerospace applications.
Applications Advantages Zero point detection Wide range of
application Aligning and level
control Low vibration
sensitivity Angle
measurement Higher Precision
2
3 4
5
6
1 7
40
90 75
4,3
60
1,5
1,5 40
3,5
5,5
25
Stand: 19.02.03 Design: Zn
-
HL-Planartechnik GmbH Hauert 13, 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020
Internet: http://www.hlplanar.com E-Mail: [email protected]
Inclinometer 45
NS-45/PI Inclinometer
Specifications
Range: 45 Percision (up to 30): analogue: digital:
0.05 0.05
Resolution: 0.003 Temperature stability: Zero point: Sensitivity ( up to 30):
< 2*10-3/K < 5*10-3/K
Analog Output: Analog current: (*)
20mA(-45) to 4mA(+45)
Digital Output: RS-232 in degrees Transmission rate: 2400 or 9600 Baud Format: ASCII Operating temp. Range: Storage temp. Range:
-25C ... +85C -40C +85C
Supply voltage: + 7 ...+ 24VDC Current consumption: ca. 35 mA Protection class: IP 65 Connection: Connector or Pigtail
Pinout
Dimensions (mm)
Theory of Operation
The NS-45/PI single-axis inclinometer is a member of a family of high performance, competitively priced, single and dual-axis inclinometers. The heart of every HL Planartechnik inclinometer is a small, state-of-the-art, inclination sensor. The sensor, which is comprised of a molded, ceramic case bonded, via a glass sealing process, to a ceramic substrate with deposited thin film, platinum electrodes. The chamber is partially filled with electrolytic fluid and then hermetically sealed. The molded, ceramic, sensor housing combined with a precise, planar electrode geometry yields excellent performance and consistent part-to-part uniformity.
All PI-type inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital and analog current output. With their machined, aluminum base plate and IP 65 housing, they are an ideal choice for a variety of industrial, automotive and aerospace applications.
Applications Advantages Zero point detection IP 65 Housing Machine Tool
Alignment Low vibration
sensitivity Level Control High Precision
2
3 4
5
6
1 7
40
90 75
4,3
60
1,5
1,5 40
3,5
5,5
25
Stand: 06.06.05 Design: Zn
1 +Ub Supply Voltage 2 GND Ground 3 Earth Earth 4 GNDx Ground for analogue current output signal Ix 5 Output
Analogue Ix 20 mA (-45) to 4 mA (+45)
6 Input digital RS232
RxD
7 Output digital RS232
TxD
(*) Impedance:
Type NS-45/PI Standard version ZA
-
HL-Planartechnik GmbH Hauert 13, D - 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020
Internet: http://www.hlplanar.com E-Mail: [email protected]
NS-45/P2 Dual Axis Inclinometer
Specifications
Range: 45 Accuracy : to +/-25 to +/-45
0.1 0.5
Resolution: 0.003 Temperature stability: Zero point: Sensitivity:
< 2*10-3/K < 0.2% /K
Output signal: Digital RS 232
In degrees Transmission rate: 2400 or 9600 Baud Format: ASCII Operating temp. Range: Storage temp. Range:
-25C ... +85C -40C +85C
Supply voltage: + 7 ...+ 24VDC Current consumption: ca. 35 mA Protection class: IP 65 Connection: Connector or Pigtail
Pinout
Dimensions (mm)
The NS-45/P2 dual-axis inclinometer is a member of a family of high performance, competitively priced, single and dual-axis inclinometers. The heart of every HL Planartechnik inclinometer is a small, state-of-the-art, inclination sensor. The sensor, which is comprised of a molded, ceramic case bonded, via a glass sealing process, to a ceramic substrate. Thin film, platinum electrodes are deposited on the substrate. Then the chamber is partially filled with electrolytic fluid and hermetically sealed.
The molded, ceramic, sensor housing combined with a precise, planar electrode geometry yields excellent performance and consistent part-to-part uniformity.
All dual axis P-type inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital output. With their machined, aluminum baseplate and IP 65 housing, they are an ideal choice for a variety of industrial, automotive and aerospace applications. .
Applications Advantages Zero point detection Wide range of
application Aligning and level
control Low vibration
sensitivity Angle
measurement Higher Precision
2
3 4
5
6
1 7
Stand: 15.05.06 Design: Zn
1 +Ub Supply Voltage 2 GND Ground 3 Earth Earth 4 n.c. n.c. 5 n.c. n.c. 6 Input
digital RS232 RxD
7 Output digital RS232
TxD
60
90 75
4,3
60
1,5
1,5 40
3,5
5,5
45