ALCATEL-LUCENT 9768METRO RADIO OUTDOORB13 1W

The Alcatel-Lucent 9768 Metro Radio Outdoor (MRO) V1.0 B13 is a next-generation radio based on Alcatel-Lucent Bell Labs groundbreaking lightRadio™ cube that brings together the latest innovations in antennas, amplifiers and transceivers to minimize size and improve radio frequency (RF) performance. The 9768 MRO is designed to be deployed as an overlay in areas covered by LTE macro eNodeBs. Macro eNodeBs cover wide geographical areas with moderate subscriber densities; single or multiple 9768 MROs can provide capacity relief in places where large numbers of subscribers congregate, such as stadiums, large enterprises and shopping malls. The Alcatel-Lucent 9768 MRO is small enough to be mounted on a wall, the side of a building or a pole and operates in 3GPP band 13 (upper 700 MHz). It uses directional antennas to cost-effectively extend 5-bar coverage and capacity to both indoor and outdoor locations. The Alcatel-Lucent 9768 operates in 3GPP band 13 (upper 700 MHz).

The Alcatel-Lucent 9768 MRO has two transmit antennas, with 500 mW conducted power at each antenna, and two receive antennas for two-way receive (Rx) diversity. The radio is ideally suited to support dense metro hotspots, with multiple-input multiple-output (MIMO) 2x2 operation in up to 10 MHz of bandwidth.

INNOVATIVE ARCHITECTUREBased on the distributed eNodeB archi-tecture, the Alcatel-Lucent 9768 MRO integrates a single lightRadio cube and the Remote Radio Head (RRH) functionality into a single compact unit, which connects to an external baseband unit (BBU). The BBU comes in a conventional or clustered configuration and may be located at the same location as the MRO or at a different location. The MRO connects to the BBU through an optical fiber, using Common Public Radio Interface (CPRI) and supports CPRI daisy chaining, thereby enabling multiple MROs to connect to the BBU over the same optical cable. This architecture maximizes deployment flexibility while optimizing the use of the BBU digital assets and connectivity costs.

FEATURES• Small,lightweightunitthatcanbe

mounted on a wall, the side of a building or pole

• Integrateddirectionalantenna,enablinghigher throughput and lower interference, leading to a higher degree of sectorization and greater power efficiency

• SingleLongTermEvolution(LTE)Frequency Division Duplex (FDD) carrier and sector

• Two-pathRxdiversityand2x2MIMOenabled by cross-polarization

• OperateswithconventionalorclusteredBBUs

• CompatiblewiththeAlcatel-Lucent 9926 Digital 2U NodeB (d2U)

• SupportsCPRIdaisychaining

www.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright © 2013 Alcatel-Lucent. All rights reserved. NP2013061554EN (June)

BENEFITS• Canbeeasilydeployedinoptimalcoverage

locations with one-man installation

• High-qualityindoorandoutdoorcoverage

• Faster,morereliabledataconnectionsandhigher data throughput

• Increasedspectralefficiencywithreducedsensitivity to fading

• Flexibledeployment,coupledwithoptimized use of the BBU digital assets

• Reducedcoststhroughleveragingthesame BBU resources as the macro network

• ReducedconnectivitycostswithmultipleMROs sharing the same optical fiber backhaul to the BBU

• Softwareupgradeabletosupportadditional features in the future, such as LTE-A HetNet

TECHNICAL SPECIFICATIONS Physical dimensions

• Height:454mm(17.87in.)

• Width:173mm(6.81in.)

• Depth:201mm(7.91in.)

Weight• 10.3kg(22.7lb)withoutmountingkit

Power• Powersupply:85/264VAC(110/220

nominal AC power input, 50 Hz or 60 Hz)

• Powerconsumption:Between70W and 80 W

Operating environment• Operatingtemperature:-40°Cto+55°C(-40°Fto+122°F)

• RelativeHumidity:8%-100%

• Passiveconvectioncooling(nofansfornoise-free operation)

• Enclosureprotection:Type4Enclosure(per UL50E)

RF characteristics• CombinedantennaandRRHfunctionality

using lightRadio cube

• Frequencyband:3GPPBand13(upper700 MHz )

• Carrierbandwidth:SupportsasingleLTEFDD carrier of either 5 MHz or 10 MHz

• Antennagainis5dBiandfront-to-backratio is >15 dB

• HalfPowerBeamwidth(HPBW)inazimuthandelevationis:

¬AzimuthHPBW:115°

¬ElevationHPBW:130°

• Maximumtransmissionpower:

¬ 500 mW conducted output power at each antenna

¬ 1 W total output power

• 64-QAMtransmiterrorvectormagnitude(EVM) less than 7 percent at maximum rated power

• Two-pathreceivediversityand2x2MIMO(cross-polarized antennas)

• Sensitivity:minimum-101.5dBmmeasured at each antenna port

Baseband interconnection• ConnectstoAlcatel-Lucent9926d2U

• Fiber-opticconnectionwithCPRIline rate 3

• Singlemode/DualFibersupport

• Multi-mode(MM)

¬ Two MM fibers, one carrying downlink (DL) and the other carrying uplink (UL) at 850 nm wavelength

¬Minimumrange:500m(0.31mi)

• Single-mode(SM)usingCWDM

¬OneSMfibercarryingDLat1550nmand UL at 1310 nm wavelength

¬Minimumrange:15km(9.3mi)

• Twosmallformfactorpluggable(SFP)optical ports to support CPRI daisy chaining with CPRI line rate 2-6

Certifications Environment operating conditions

• GR-487

Safety

• CAN/CSA-C22.2No.60950-1-07/UL-60950-1,SecondEdition,informationTechnologyEquipment–Safety–Part1:General Requirements

• CSA-C22.2No.94.1-07/UL50,12thed.CSA-C22.2N94.2-07/UL50E,1sted.,Enclosures for Electrical Equipment

Eco-Environment

• EURoHSDirective–EuropeanUnionDirective on Restriction of the Use of CertainHazardousSubstancesinElectricalandElectronicEquipment(2002/95/EC),RoHS“6of6”

• EUDirectiveonWasteofElectricalandElectronicEquipment(WEEE):Directive2002/96/EC

• EuropeanParliamentandCouncilDirective94/62/EConPackagingandPackagingWaste (O.J. L 365, 31 December 1995) and amendments.

• Alcatel-LucentSupplierRequirements,SubstanceRestrictions:1AA002660035ASZZA

EMC (Electromagnetic Compatibility)

• GR-1089-CORE

• FCCPart15SubpartBClassBandFCCPart 27