novatem pamphlet 2010 heliborne geophysical.pdf · novatem - 1087, chemin de la montagne,...
TRANSCRIPT
-
_______________________________________________
NOVATEMNOVATEMNOVATEMNOVATEM - 1087, Chemin de la Montagne, Mont-Saint-Hilaire, J3G 4S6, Qc, Canada www.novatem.com - [email protected] - Tel: +1 450 464 1655 - Cel: +1 514 966 8000
COLIBRICOLIBRICOLIBRICOLIBRI he l ibo rnehe l ibo rnehe l ibo rnehe l ibo rne geophy s i cal geophy s i cal geophy s i cal geophy s i cal surv eyssurv eyssurv eyssurv eys
COLIBRI has been designed by Novatem for surveys
requiring both tight-draped and low height
measurements. The helicopter flies close to the ground
and follows the topography precisely.
The clearance of the helicopter is measured accurately
by a laser altimeter of centimetric precision. This laser
samples alternatively the height above the ground and
above the vegetation. Thus, the pilot can follow one or
the other according to the importance of the vegetation
on the survey.
The height variations between adjacent profiles are
thus minimized and corrugation is considerably
reduced. Therefore, only the control lines located at the
end of the traverse lines are necessary, which
significantly decreases the price.
The magnetometers are located in front of the
helicopter as far as possible by means of a stinger
developed and certified by Novatem.
The certification of the system on floats enables flights
over water.
Novatem staff constant dedication to quality, improves
again the high resolution data collected via COLIBRI.
Quality controls are integrated in the normal survey
procedures and starts from the establishment of the
flights path until the delivery of the final data and
reports to the client.
During the survey, quality controls are regularly
performed by the Project Manager. In flight, the quality
controls are computer-performed and the pilot
interrupts the survey if the geophysical or/and
aeronautical parameters don’t meet the survey
specifications.