not to scale · 2020. 5. 28. · 160 ft. (4 skip lines) right lane closed 1/2 mile lane closed 1500...

160 FT. (4 Skip Lines) RIGHT LANE CLOSED 1/2 MILE LANE CLOSED 1500 FT. (Min.) (3 Reference Markers) and ½ Mile (Max.) 750 FT. (1.5 Reference Markers) NYW8-33 48x24 in. W4-2R 48x48 in. W20-5R 48x48 in. Roll Ahead Distance Arrow Panel TASD-E3 TASD-E3 NYSDOT WORK ZONE TRAFFIC CONTROL SHORT DURATION OPERATION INVOLVING RIGHT LANE CLOSURE (PAVED SHOULDER 8 FT. OR WIDER) ON FREEWAY OR EXPRESSWAY OCTOBER 2019 FREEWAY OR EXPRESSWAY 4. Spotter Recommended Cone spacing not to exceed 40 FT. ( 1 Skip Line) NOT TO SCALE ROAD WORK 1 MILE ROAD WORK 1 MILE W20-1 48x48 in. LANE CLOSED LANE CLOSED LANE CLOSED Notes: 1. Short duration is work that occupies a location for up to 1 hour. 2. 3. 6. There shall be no workers, equipment, or other vehicles in the roll ahead distance. RIGHT LANE CLOSED 1/2 MILE 18”x18” (Minimum) Warning Flags 1/2 mile Rev. 2019V.04 (Caution Mode) Arrow Panel Shadow/Barrier Vehicle with TMIA Work Vehicle Advanced Warning Vehicle OR ROAD WORK 1 MILE OR RIGHT LANE CLOSED 1/2 MILE 5. Should the work duration continue on longer than the 1 hour Maximum the Work Zone Traffic Control Setup shall be econfigured and adjusted to meet the requirements of the Short Term Stationary Right Lane Closure Set-up. Safety in a short duration operation should not be compromised by using fewer devices simply because the operation will frequently change its location. The Shadow Vehicle shall maintain the appropriate Roll-Ahead Distance, positioned parallel to traffic, parking brake set when possible, have the wheels aligned with the lane striping and lane to maintain lane discipline and to try to stay in lane if struck. Operators of Shadow Vehicles shall remain in the cab, with the lap/ shoulder belt and headrest properly adjusted. Advanced Warning Vehicle may be occupied or unoccupied. If occupied, communication must be established with the work vehicle to ensure adequate spacing is maintained as the work progresses. The operator shall remain in the vehicle with the safety belt and headrest properly adjusted. The vehicle must be positioned parallel to traffic and have the wheels aligned with lane striping and to maintain lane discipline and to stay in lane if struck. If unoccupied, the vehicle must be positioned parallel to traffic and have the wheels aligned with lanes triping. It must be placed in Neutral with the parking brake set (Park/2nd gear for engine off conditions). Advanced Warning signs shall be placed on a temporary sign stand and located on the side of the roadway where the operation is occuring. Sign shall be moved periodically so that it is kept as close as practical to the actual location of the work vehicle.

Upload: others

Post on 03-Feb-2021

1 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

160 FT.(4 Skip Lines)

RIGHTLANE

CLOSED1/2 MILE

LANECLOSED

1500 FT. (Min.)(3 Reference Markers)

and½ Mile (Max.)

750 FT.(1.5 Reference Markers)NYW8-33

48x24 in.

W4-2R48x48 in.

W20-5R48x48 in.

Roll Ahead Distance

Arrow Panel

TASD-E3

TASD-E3

NYSDOTWORK ZONE TRAFFIC CONTROL

SHORT DURATIONOPERATION INVOLVING

RIGHT LANE CLOSURE(PAVED SHOULDER 8 FT. OR WIDER)

ONFREEWAY OR EXPRESSWAY

OCTOBER 2019

FREEWAY OR EXPRESSWAY

4.

SpotterRecommended

Cone spacing notto exceed 40 FT.

( 1 Skip Line)

NOT TO SCALE

ROADWORK1 MILE

ROADWORK1 MILE

W20-148x48 in.

LANECLOSED

LANECLOSED

LANECLOSED

Notes:1. Short duration is work that occupies a location for up to 1 hour.2.

3.

6. There shall be no workers, equipment, or othervehicles in the roll ahead distance.

RIGHTLANE

CLOSED1/2 MILE

18”x18”(Minimum)

Warning Flags

1/2 mile

Rev. 2019V.04

(Caution Mode)

Arrow Panel

Shadow/Barrier Vehicle with TMIA

Work Vehicle

Advanced Warning Vehicle

ORROADWORK1 MILE

ORRIGHTLANE

CLOSED1/2 MILE

5.

Should the work duration continue on longer than the 1 hour Maximum the Work Zone Traffic Control Setup shall be econfigured and adjusted to meet the requirements ofthe Short Term Stationary Right Lane Closure Set-up.Safety in a short duration operation should not be compromised by using fewer devices simply becausethe operation will frequently change its location.The Shadow Vehicle shall maintain the appropriate Roll-Ahead Distance, positioned parallel to traffic, parking brake set when possible, have the wheels aligned with the lane striping and lane to maintain lane discipline and to try to stay in lane if struck. Operators of Shadow Vehicles shall remain in the cab, with the lap/ shoulder belt and headrest properly adjusted.Advanced Warning Vehicle may be occupied or unoccupied. If occupied, communication must be established with the work vehicle to ensure adequate spacing is maintained as the work progresses. The operator shall remain in the vehicle with the safety belt and headrest properly adjusted. The vehicle must be positioned parallel to traffic and have the wheels aligned with lane striping and to maintain lane discipline and to stay in lane if struck. If unoccupied, the vehicle must be positioned parallel to traffic and have the wheels aligned with lanes triping. It must be placed in Neutral with the parking brake set (Park/2nd gear for engine offconditions).

Advanced Warning signs shall be placed on a temporary sign stand and located on the side of the roadway where the operation is occuring. Sign shall be moved periodically so that it is kept as close as practical to the actual location of the work vehicle.