Does your noise dosimeter give you the edge?

Svantek SV 104 Personal Noise Dosimeter

Svantek SV 104 Personal Noise Dosimeter

The SV 104 noise dosimeter truly gives professionals the edge in hearing conservation. It is the only badge noise dosimeter with:

P Real-time octave band analysis for accurate hearing protector selection data

P Three simultaneous, independent dosimeter measurements for OSHA PEL, OSHA HCA, ACGIH, or custom configurations

P Audio recording for peak or threshold noise-source identification

P MEMS triaxial vibration sensor identifying possible instrument impacts

P Durable MEMS microphone for greater shock resistance

P Color OLED display for ease of reading in dim light or direct sunlight

Show

n Ac

tual

Siz

e

Svantek SV 104 Personal Noise Dosimeter

01

02

03

MEMS Microphone

The SV 104 offers a solid state microphone technology built directly into the dosimeter body. The microphone is robust, resisting impact and is virtually immune to environmental influences such as temperature and moisture. This results in a longer life and lower cost of ownership.

Color OLED Display

High-contrast, color graphic display is a first in badge style personal noise dosimeters and provides better visibility in direct sunlight, under bright lights, and in dim lighting. Color makes it easier to display large amounts of data within a limited display area.

Real-time Octave Band Analysis Option

Simultaneous measurement of individual octave bands with overall broadband noise dose measurements results offer professionals complete information for the correct prescription of appropriate hearing protection from a single noise survey. Octave band analysis provides greater measurement effectiveness while saving costs associated with using additional instruments.

Svantek SV 104 Personal Noise Dosimeter

04

05

06

Audio Event Recording Option

Record actual audio samples of noise occurring above the selected threshold level to identify contributions to dose exposure, verify noise sources, and validate workplace related noise versus user interference. Audio event playback is performed through the included PC application.

Micro SD Memeory Card

A high-capacity 8GB memory card enables storage of all dose measurement results and one-second time history data from all three user profiles, the octave band analysis data, audio event recording, and voice comments. The large storage capacity is sufficient for recording numerous noise surveys.

Voice Comment Recording

Record brief audio comments before or after surveys to capture relevant voice notes such as location information, worker data, and machinery and process conditions. Voice comments may be played back through the included PC application.

Svantek SV 104 Personal Noise Dosimeter

07

08

09

MEMS Triaxial Vibration Sensor

The embedded triaxial vibration accelerometer measures dosimeter movement including excessive vibration or impacts that may result in false-positive dose measurements. The PC software allows users to review vibration data and determine if affected periods should be removed from the dose calculation.

Lockable Keypad and Display

Eliminate tampering from workers and discourage interference with the instrument by locking the keypad. The color OLED display may optionally be blanked out during surveys for further discretion or tamper-avoidance.

Three Independent User Configurable Profiles

Each of the thee independent profiles can be user configured to measure noise exposure according to specific parameters. Example configurations include OSHA Hearing Conservation Act (HCA), OSHA Permissible Exposure Level (PEL), and ACGIH profiles. Simultaneous measurements save time and costs associated with multiple separate surveys.

Svantek SV 104 Personal Noise Dosimeter

10

11

12

Low Power Digital Signal Processing (DSP)

Enhanced DSP capabilities provide sufficient battery life for up to five 8-hour noise surveys on a single charge. Low power requirements allow charging from powered USB port or wall plug.

Extended Dynamic Range

The SV 104 measures from under 60 to 140 dB to address all workplace noise levels of interest. This range permits use even in quieter noise environments due to the extended low-end range as compared to other badge style personal noise dosimeters.

Automatic Calibration Technology

Calibration procedures begin automatically when an acoustic calibrator is placed over the microphone. One button controls accuracy verification at the start and end of every measurement.

Svantek SV 104 Personal Noise Dosimeter

The SV 104 noise dosimeter gives users the edge in noise measurement and hearing conservation.

A company of the SCHAUENBURG International GroupSensidyne, LP | 1000 112th Circle North, Suite 100 | St. Petersburg, Florida 33716 U.S.A.Tel: 800-451-9444 / +1 727-530-3602 | E-mail: info@Sensidyne.com | Web: www.Sensidyne.com