no mhc budgit hoists-9 - mclaughlin hoist &...
TRANSCRIPT
Series 6000
• Die-cast aluminum frame - lightweight, rugged, holds shafts and bearings inclose alignment
• Gearing - combination of precision cut, heat treated helical and spur gearsfor quiet, efficient operation
• Mechanical load brake - positive action, spring biased Weston type loadbrake holds the load and provides exact load spotting and control
• Overload protection - MANGAURD overload device protects againstexcessive overloads... clutch also acts at upper and lower limits
• Multi-vane rotary air motor - eight vanes provide high torque smoothoperation, positive starting and excellent control
• Internal Muffler - reduces sound level
• Pendant control - pendant throttle handle is of the full flow design forexcellent load spotting capabilities
• Throttle valve - percision throttle valves meter the air for smooth operation
10
Basic Hoist Data
Rated Loads1,2, and 3-ton (Spark resistant models are rated at1/2, 1 and 2-ton).
Air Pressure Recommended90 PSI
Air Consumption70 SCFM (full load-full speed) slow speed model;80 SCFM (full load-full speed) fast speed model.
Pendant Control Hose6 foot pendant hose standard for 10 foot lift hoist,longer hose assemblies up to 36 foot available.
Lift10 foot lifts are standard. Additional lifts available.
Net Weight (Basic Hoist)100 lbs.
SuspensionHook or lug
Air Inlet Size3/4 NPTF
Air Supply Hose Size3/4 I.D. min.
tons *FPM *FPM lbs.Hook / Spark 911683 95Lug / Spark 911693 110
911644 13 18 93911641 30 42 95
Hook / Spark 911684 8 11 2 112911654 13 18 106911651 30 42 108
Lug / Spark 911694 8 11 2 120911645 6 9 110911642 15 12 112
Hook / Spark 911685 5 7 3 146911655 6 9 116911652 15 21 118
Lug / Spark 911695 5 7 3 170911646 4 6 144911643 10 14 146911656 4 6 164911653 10 14 166
Net Weight
Hook / Standard
Lug / Standard
Full Load Lift Speed
22 1
1
1
1/2
1
16
Hook / Standard
Lug / Standard2
Hook / Standard3
Lug / Standard
2
2
3
Capacity Hoist Catalog #
Full Load Lowering Speed
Parts of ChainModel
*Hoist speeds based on 90 PSI line pressure with full rated hoist load
Hook & Lug Suspension Specifications
Series 6000
H
C EG DiaK K
Y
X
A
B
2 5/8
LNN
8
J
5 1/4
10 5/16EC
H
Y
X
AB
2 5/8
8
5 1/4
10 5/16
D
11
tons in in in in in in in in1/2 Hook / Spark 911683 16-1/2 11-7/16 6-5/8 2-15/16 6-3/8 7/16 27-13/16 9-11/16
911644911641
Hook / Spark 911684 22 13-1/8 7-15/16 4-9/16 5-1/16 3/16 29-1/2 11911645911642
Hook / Spark 911685 24-7/8 14-3/8 9-3/8 5-7/8 7-1/8 1/4 30-3/4 12911646911643
H X YCapacity Hoist
Catalog #Model
1
D EBA C
13-1/8 7-15/16 4-9/16 5-1/16
6-5/8 2-15/16 6-3/816-1/2
22
Hook / Standard
2
3
Hook / Standard
Hook / Standard 11-17/16 7/16
24-7/8 14-3/8 9-3/8 5-7/8 7-1/8
27-13/16
3/16 29-1/2
1/4 30-3/4
9-11/16
11
12
tons in in in in in in in in in in in in1/2 Lug / Spark 911693 15-1/4 6-5/8 6-3/8 1 1-9/16 1-11/16 10-13/16 1-13/16 5/8 7/16 26-9/16 9-11/16
911654911651
Lug / Spark 911694 21 7-15/16 5-1/16 1-11/16 2-1/2 1-7/8 11-1/8 2-3/16 1 3/16 27-1/2 11911655911652
Lug / Spark 911695 23-5/16 9-3/8 7-1/8 3-1/16 3 1-1/4 12-7/8 3 1-1/4 1/4 29-1/4 12911656911653
H X Y
1
1/4 29-1/4 12
3/16 27-1/2 11
7/16 26-9/16 9-11/16
3 1-1/423-5/16 9-3/8 12-7/87-1/8 3-1/16 3 1-1/4
121 7-15/16 1-7/85-1/16 1-11/16 2-1/2 11-1/8
GN
1-13/16 5/8
2-3/16
Lug / Standard
2
3
Lug / Standard
Lug / Standard
15-1/4 6-5/8 6-3/8 1 1-9/16 1-11/16 10-13/16
J K L MEB CCapacity Hoist
Catalog #Model
Lug Suspension Specifications & Dimensions
Hook Suspension Specifications & Dimensions
Hook Suspension Lug Suspension
Spark Resistant Models
Spark resistant hoists offer greater protection in hazardous environments. Components for spark resistance includesbronze alloy hooks with stainless steel hook latches, lower blocks of stainless steel on single part chain and aluminumon 2 and 3 part chain, chrome nickel non-magnetic stainless steel alloy load chain, bronze limit stop with aluminumlimit actuators and modified sprocket and guide. A spark resistant chain container is recommended on 10 foot liftspark resistant hoists. Spark resistant chain containers are stainless steel.
The spark resistant Series 6000 air hoists have lower speeds and are derated due to the use of stainless steel loadchain. The lower wear life of stainless steel chain limits applications to medium duty service.
When specifying lug suspended spark resistant hoists, care must be taken in the trolley selection to assure that thetrolley fits the derated hoist lug. If this is your first purchase, consult the factory for assistance.
Series 2200
Model # Net Weight Model # Net
Weight
tons tons lbs. lbs. in in in
1/4 2201 37 2202 47 1 65 951/2 2203 37 2204 47 1 45 1201 2205 51 2206 61 2 23 60
1/4 2211 36 2212 46 1 65 951/2 2215 36 2216 46 1 45 1201 2219 49 2220 59 2 23 60
3/8 2241 36 2242 46 1 60 1003/4 2243 49 2244 59 2 29 52
1/4 2251 36 2252 46 1 65 951/2 2255 36 2256 46 1 45 1201 2259 49 2260 59 2 23 60
3/8 2281 36 2282 46 1 60 1003/4 2283 49 2284 59 2 29 52
Pendant Throttle Control Parts of
Load Chain
Lifting Speed Max**
Lowering Speed Max**
Link Chain
Type
Hook Mount Trolleys
Pull Cord Control
Standard Models
Spark Resitant Models
Roller Chain
Link Chain
Link Chain
Capacity
Lug Mount TrolleysStandard Models
Spark Resistant Models
Link Chain
• Pull cord control provides a lightweight, economical hoist for accurate control ofloads
• Pendant throttle control hoists offer ergonomic one-handed controls, for ease ofoperation
• Inlet air swivel with built-in strainer provides free hoist movement
• Aluminum frame and end cover contributes to the lightweight, easily portable,and rugged design
• Heavy duty shoe type brake is a proven design for stopping and holding loads inheavy duty applications
• External adjustment screws for decreased lift and lower speeds
• External brake adjustment
• Limit stops prevent over-travel in upper and lowering directions
• Equa-torque gearing of alloy steel, heat treated spur gears is accuratelymachined to provide a close meshed, compact gear reduction
• Eight-vane motor provides high torque, smooth starting and excellent control
• Tapped exhaust port 1/2 NPTF... for CLEAN applications or to add asupplemental muffler in addition to the built-in muffler for even quieter operation
12
Basic Hoist Data
Rated Loads1/4, 1/2, and 1-ton (Sparkresistant models are rated at3/8 and 3/4-ton).
Air Pressure Recommended90 PSI
Hook & Lug Suspension Specifications
Air Consumption48 SCFM at 90 PSI
Pendant Control Hose6 foot length is standard. Longer lengths are anoptional extra up to 72ft available.
ControlPull cord or pendant throttle
Lift10 foot lifts are standard. Additional lifts available.
Net Weight (Basic Hoist)36 lbs.
SuspensionHook or lug
Air Inlet Size3/8 NPTF
Air Supply Hose Size1/2 I.D. min.
Air Exhaust1/2 NPTF
Series 2200
Exhaust1/2 N.P.T.
Inlet3/8 N.P.T.
W
Z
X
JC
B
A
Y
F EExhaust1/2 N.P.T.
Inlet3/8 N.P.T.
W
Z
X
JC
B
A
Y
F EM
M
13
Type CapacityPull Cord ControlModel #
Pendant Throttle Control
Model # A B C E F J M W X Y Ztons tons in in in in in in in in in in in
1/4 2201 2202 15-1/4 10-1/4 4-3/4 7-1/16 5-1/16 6-15/16 10-3/16 3-5/8 30-1/8 8-9/16 5-1/41/2 2203 2204 15-1/4 10-1/4 4-3/4 7-1/16 5-1/16 6-15/16 10-3/16 3-5/8 30-1/8 8-9/16 5-1/41 2205 2206 18 10-1/4 5-3/4 7-1/16 5-1/16 6-15/16 10-3/16 3-5/8 30-1/8 9-11/16 5-1/4
1/4 2211 2212 15-1/4 10-1/4 4-3/4 7-1/16 5-1/16 6-15/16 10-3/16 3-5/8 30-1/8 8-9/16 5-1/41/2 2215 2216 15-1/4 10-1/4 4-3/4 7-1/16 5-1/16 6-15/16 10-3/16 3-5/8 30-1/8 8-9/16 5-1/41 2219 2220 18 10-1/4 5-3/4 7-1/16 5-1/16 6-15/16 10-3/16 3-5/8 30-1/8 9-11/16 5-1/4
3/8 2241 2242 15-1/4 10-1/4 4-3/4 7-1/16 5-1/16 6-15/16 10-3/16 * * * *3/4 2243 2244 18 10-1/4 5-3/4 7-1/16 5-1/16 6-15/16 10-3/16 * * * *
Link Chain
Standard Models
Spark Resitant Models
Roller Chain
Link Chain
Type CapacityPull Cord Control
#
Pendant Throttle Control
Model # A B C E F G J K M W X Y Ztons tons in in in in in in in in in in in in in
1/4 2251 2252 13-7/8 9-5/8 4-3/4 7-1/16 5-1/16 1-1/4 6 1/16 10-3/16 3-5/8 29-1/4 8-9/16 5-1/41/2 2255 2256 13-7/8 9-5/8 4-3/4 7-1/16 5-1/16 1-1/4 6 1/16 10-3/16 3-5/8 29-1/4 8-9/16 5-1/41 2259 2260 17 9-3/4 5-3/4 7-1/16 5-1/16 1/4 6 1-3/16 10-3/16 3-5/8 29-1/4 9-11/16 5-1/4
3/8 2281 2282 13-7/8 9-5/8 4-3/4 7-1/16 5-1/16 1-1/4 6 1/16 10-3/16 * * * *3/4 2283 2284 17 9-3/4 5-3/4 7-1/16 5-1/16 1/4 6 1-3/16 10-3/16 * * * *
Link Chain
Standard Models
Spark Resistant Models
Link Chain
Model
Lug Suspension Specifications & Dimensions
Hook Suspension Specifications & Dimensions
Exhaust1/2 N.P.T.Inlet3/8 N.P.T.
WZ
X
1 9/16 1 9/165/8 dia
1 7/8
3 5/8
JC
K B
A
M
Y
TREAD LINE
F E
5/8 dia
1 9/16
Exhaust1/2 N.P.T.
Inlet3/8 N.P.T.
W
Z
X
JC
B
A
M
Y
FE
3 5/8G
K
1 9/16TREAD LINE
1 7/8
1/4 and 1/2 ton 1 ton
1/4 and 1/2 ton 1 ton
* Spark resistant chain container dimensions can be found in the Air Hoist Accessories section of this brochure
* Spark resistant chain container dimensions can be found in the Air Hoist Accessories section of this brochure
Series 600
14
• 10-pocket oblique-lay liftwheel provides longer chain life
• Epoxy powder coat finish is smooth and tough
• Double reduction gearing
• Variable flow, two-lever pendant for precise load spotting
• Threaded external exhaust for piping away exhaust in clean room orpainting operations
• Rugged cast aluminum alloy hoist frame. Small, compact design forcommercial and industrial applications
• Industrial-duty air motor for tough requirements
• Gear train is lifetime-lubricated with non-oxidizing grease
• Hardened, forged steel, latch-style lower hook rotates 360º. Upperhook provided with a positive load engagement.
• Chain bucket optional
Capacity Lift Speed Parts of Chain Hoist Catalog Number Headroom A B *C Shipping Weightlbs. FPM in in in in lbs.250 0-31 1 931889 10-7/8 10-7/8 3-7/8 6'4" 30
300 0-31 1 931890 10-7/8 10-7/8 3-7/8 6'4" 30
500 0-21 1 931892 10-7/8 10-7/8 3-7/8 6'4" 30
500 0-16 2 931894 11-15/16 11-15/16 5-3/4 6'4" 34
600 0-16 2 931895 11-15/16 11-15/16 5-3/4 6'4" 34
1000 0-11 2 931897 11-15/16 11-15/16 5-3/4 6'4" 34
* Pendant drop is for 10’ lift. Other lifts available.
13/16
6 1/4
B
13/16 9/16
9/16
1
3
2 1/16 2 15/16
1
1 3/4
5/8
4 1/16
3/8 NPTFOR AIR SUPPLYCONNECTION
A6 1/32 6 13/16 C
Specifications & Dimensions
TMM140
• Capacity: Rated loads 300 lbs./140 kg.
• Efficient rotary vane motor provides high uniform torque for quick response and smooth,quiet operation.
• Handle-mounted pendant control for one-handed operation and load positioning.
• Precise and infinite speed control for accurate load spotting.
• Self-winding lifting cable stores conveniently inside unit.
• Swivel top and bottom hooks with safety latches standard, for portability and quickinstallation.
• Secures load and eliminates drift when pendant is released.
• A 3/8” NPT air filter-regulator-lubricator is needed for effective operation. Spark resistantfeatures are not available.
• Lifetime Warranty
• Ideal Applications- Assembly Line
- Machine Shops
- Cleaning and/or Dipping Operations
- Manufacturing Plants
- Power Generating Stations
- Shipping Departments
- Chemical Facilities
- Fabricating Shops
- Repetitive Lifting Applications
- Auto/Truck Repair
- Handling Fixtures and Dies
Up Down Up Down D W Llbs. ft. CFM in psi lbs.300 TMM-140 6' 6" 36 59 49 39 21.2 22-3/4 7-2/3 7-7/8 23-3/4 70-95 18.7
Capacity Model #Lift Speed w/ load Lift Speed w/o load Max Air
PressureNet
WeightHeadroomAir
Consump.FPM
Housing Dimensions
in.
Standard Lift
15
7.68
4.49 3.19
7.83
3.62 4.21
.58
.93
22.75
1.42
Specifications & Dimensions
Air Hoist Accessories
16
FILTER-LUBRICATOR UNIT Air hoists must have a supply of clean, lubricated air for their operation. A filterand lubricator must be installed in the air supply line, as close as practical to thehoist. The recommended operating air pressure for all capacities of BUDGIT® airhoists is 90 psig. When air line pressure exceeds 115 psig, it is required that apressure regulator be provided in the supply line to maintain proper pressure.
Catalog # Inlet / Outlet Size Bowl Size. Shipping Weight Catalog # Inlet / Outlet
Size Bowl Size. Shipping Weight
in oz. lbs. in oz. lbs.902960 3/8 11 8 902966 3/8 11 14
902961 1/2 11 8 902967 1/2 11 14
902962 3/4 24 12 902968 3/4 24 18
902963 1 24 12 902969 1 24 18
BULLARD HOOKSAll hoists are furnished as standard with hooks equipped with hook latches. Bullard Hooks with rugged cast swing gate lockingmember that provides greater assurance of load containment are available at additional cost. Spark resistant Bullard Hooks arenot available.
REDUNDANT SUPPORTHoist suspension redundant support for Series 2200 hoist is available for additional cost. This redundant support features a cablethat inserts through the hoist frame and around the initial support.
PENDANT THROTTLE CONVERSION KITKits for converting the pull cord Series 2200 BUDGIT® Air Hoist to pendant throttle operation has standard 6-foot pendant hoseassembly. Longer hose assemblies available. Order Catalog No. 2269. Shipping weight is 8 pounds.
CHAIN CONTAINERSChain containers provide an ideal means for eliminating hanging tail chains. They are easily installed and accept the chain in such a way that chains tend not tokink or twist. State codes are more frequently calling for use of chain container with each hoist.
1/4, 3/8, 1/2 Ton 3/4, 1 Ton R Sft ft lbs. in in
902631 Link Chain 25 12 4-1/2 4-1/2 12
902635 Link Chain 45 22 9 4-1/2 17902634 Link Chain 25 12 5 4-1/2 12902636 Spark Resistant 45 22 10 4-1/2 7902632 Roller Chain 15 - 6-1/2 9 17-1/2902633 Roller Chain 30 15 11 12-1/2 22-1/4
Shipping WeightCatalog # Chain Type
Maximum Lift Dimension
1 Ton 2 Ton 3 Ton R S 1/2 Ton 1 Ton 2 Ton R Sft ft ft lbs. in in ft ft ft lbs. in in
905434 15 do not use do not use 4 4-1/2 10 905444 15 do not use do not use 4 4-1/2 10905435 30 15 10 8 4-1/2 15 905445 30 15 10 8 4-1/2 15905436 45 22 15 10 4-1/2 19 905446 45 22 15 10 4-1/2 19905437 60 30 20 14 4-1/2 23 905447 60 30 20 14 4-1/2 23905438 75 37 25 15 4-1/2 28 905448 75 37 25 15 4-1/2 28905439 90 45 30 16 4-1/2 33 905449 90 45 30 16 4-1/2 33
DimensionMaximum Lift Catalog #
Maximum Lift Shipping WeightCatalog # Shipping
WeightDimension
Filter - Lubricator Units Filter - Regulator - Lubricator Units
Chain Container for Series 2200 Air Hoist
Chain Container for Standard Series 6000 Air Hoist Chain Container for Spark Resistant Series 6000 Air Hoist
Series 2200 Series 6000
Air Hoist Accessories
17
Catalog # ID OD Braid Max. PSI Width Catalog # Hose ID Thread Size M-NPT Catalog # Hose ID Thread Size
M-NPT
in in ft in in in in901610 1/2 15/16 1 200 0.33 901614 1/2 3/8 901618 1/2 3/8
901611 3/4 1-1/4 2 225 0.52 901615 3/4 3/4 901619** 3/4 3/4
901612 1 1-1/2 3 200 0.65 901616 1 3/4 901620** 1 3/4
AIR HOSE ASSEMBLY Assembly requires Catalog No. for both hose and fittings
AIR HOSE TROLLEYS CATALOG NO. 254(For use with Series 2200 and Series 6000 Air Hoists)These trolleys are used to support air hose and are installed on the same track as a hoist. Hose clamp swivels and will fit 5/8 to1-1/2 inch diameter hoses. Shipped from factory in cartons of six only.
RECOIL AIR HOSE WITH FITTINGFor application where air hose trolleys with looped hose is impractical; coil type self-storing hose is recommended.
WIRE ROPE FESTOON SYSTEMS FOR AIR SUPPLY HOSESystem include (note numerical key in illustration at right): (1) 2 end clamp assemblies; (2) 1 hardware kit consisting of 2 eye-bolts, 5 clamps and 1 ball stop; (3)Intermediate carriers - see specified quantity in last column of chart below; (4) Nylon covered wire rope per required length.
Catalog # A B C DMaximum Combine Cable Wt.
Clamp Distance
No. of Carriers (item 3)
ft ft ft ft lbs. / ft ft16 3 18.5 0.84 1.31 6.87 2
21 4 23.5 0.84 1.01 8.87 2
28 3 31.1 1.40 1.31 6.87 4
37 4 40.1 1.40 1.01 8.87 4
40 3 43.6 1.97 1.31 6.87 6
52 4 55.6 1.97 1.01 8.87 6
901601
901602
901603
Air Supply HoseFittings*Male Swivel at One End - Standard Male at Opposite End
Fittings with Quick Disconnect*Quick Disconnect on One End - Standard Male at Opposite End
* Fitting installed on above hose. * Fitting installed on above hose. * 3/4 NPT Quick disconnect is without
check valve.
Catalog # Hose Size x Working Length Fitting Each End
Catalog # Length
I.D. in x ft
ft
901621 1/2 x 15
901629 25
901622 1/2 x 25
901630 50
901624 3/4 x 15
901625 3/4 x 25
901626 3/4 x 50
3/8 NPTF Male Swivel Fittings
3/4 NPTF Male Swivel Fittings
Self Storing Air Hose with FittingsNylon Coated Cable with Eyebolt FittingsEach End for Supporting Recoil Air Hose(Supports by Others)
Hose System (from 0.91” to 1.25” O.D.)
NOTE:Festooning hose and connectors are not included in the system.