nickel coated fibers advanced materials - conductive...
TRANSCRIPT
Nickel Coated FibersConductive Composites has developed a proprietary Chemical Vapor Deposition
(CVD) coating process where fibers are coated with a very thin, robust, and ductile
film of pure nickel. Nickel coated fibers present an ultimate combination of low
density, high strength, toughness, and high conductivity. Our process produces a
conductive fiber with superior handling properties, excellent conductivity/shielding
capabilities and are available in tow, braid, cloth, and converted formats. Our CVD
technology allows a wide range of fiber types to be coated including cellulose, silk,
cotton, jute and even carbon nano materials to name a few.
Carbon FibersCarbon fibers are widely used in commercial and defense
application for their strength and weight properties, and our nickel
coating process adds electrical and shielding performance and
deliver a multifunctional materials system. Available in multiple
tow count and modulus levels, our coated fibers provide a number
of unique properties that can only be obtained through our
proven process.
Aramid FibersNickel coated aramid fibers are high strength, heat-resistant
synthetic fibers which present an ultimate combination of low
density, high strength, toughness, and high conductivity.
CutFiber (chopped & sized staple)Our chopped/sized conductive fiber staple is available with a
wide range of nickel coating levels and sizing chemistries in
lengths from 6mm to 24mm. The superior properties of our
CutFiber makes it a perfect high performance structural and
conductive additive for thermosets & thermoplastics and is also
used in conductive nonwovens.
Precision Converted Fiber (PCF)Our precision converted nickel coated fiber is a highly uniform
short fiber format in length from 2mm to 100µm. Our PCF provides
our customers and partners with a high-performance structural
and conductive additive that is both lighter and longer than typical
nickel coated graphite formats. With a wide range of available
nickel coating levels and sizing chemistries, our easily
dispersable, high uniformity conductive short fiber format is
perfectly suited for conductive gaskets, elastomers, sealants,
adhesives and paints.
ADVANCED MATERIALS
advanced materials from a unique
commercial process
357 West 910 South Heber City, UT 84032 :: 435.654.3683 :: [email protected]
357 West 910 South Heber City, UT 84032 :: 435.654.3683 :: [email protected]
Traditional Electroplated Fibers
Conductive Composites Vapor Deposition Coated Fibers
Inquire about additional base fiber types, coating levels, sizing, format and packaging options
NiFiber Nickel CVD Coated FIbers
Inquire about additional base fiber types, coating levels, sizing, format and packaging options
Cut Fiber
Inquire about additional base fiber types, coating levels, sizing, format and packaging options
Precision Cut Fiber (PCF)
Chemical Vapor Deposition (CVD)
Conductive Composites’
proprietary process provides
continuously coated fibers and
provides many advantages
over traditional methods of
coating fibers.
Conductive Composites believes these values to be typical, however, Conductive Composites does not assume any liability whatsoever for accuracy or completeness of any information contained in this document. Conductive Composites does not warrant this product with respect to merchantability or suitability for use, including any intellectual property or trade restrictions, which is the sole responsibility of the purchaser and/or end user. Always refer to materials handling instructions and safety documentation when using this or any other material. ©2014 Conductive Composites Enterprises, LLC.