next steps panels- delivery... · 2020. 11. 26. · z^mqm]q_arer]cwzzrumz^eravm]u...
TRANSCRIPT
-
Delivery and Handling Information
Congratulations on your EGGER purchase! All ForestOne panel decorative products are delivered
with protective cover sheets plus sufficient straps and supporting gluts, but for EGGER panels extra
consideration must be taken due to the dimensions and weight. While the sheet size allows for
maximisation of board, it is important they be handled safely. Below is important Chain of
Responsibility safety information for proper handling.
Handling and Unloading:
Manual and Hand Unloading
Customer Pick Up
The parent tynes must be 1560mm long to
support 75% of the full width of the load
OR the forklift tyne extensions or slippers
must be 2070mm long to support the full
width of the board
To comply to Australian standards;
EGGER panels* are up to 80kgs/sheet. Only
handle them from a safe, manageable height on
a stable, flat surface by a minimum two persons.
Forklift/Lifting Equipment
Adequate weight capacity
Sufficient width and length to support the
load and prevent illegal overhang
Adequate restraints to secure the load
OR, if carrying on racks, a rack size and load
rating sufficient to handle the weight and
dimensions of your order
For ForestOne operators to load Egger panels
into vehicles, the vehicles must have:
ForestOne Solutions:
Providing your premises has sufficient room
for a crane truck to safely swing and unload
on a suitable surface, ForestOne can organize
a crane truck delivery to your premises.
Crane Truck UnloadShould you require a lower smaller truck bed for
hand unloading or for tighter access than the
ForestOne fleet will allow, we can organize a
suitable taxi truck delivery to meet your needs.
Small Taxi Truck Delivery
ForestOne offers a cutting service which can
cut your sheets to a suitable size to allow safe
delivery or handling by your current
equipment and methods.
Cutting ServiceIf a ForestOne delivery arrives and goods
cannot be unloaded safely, the unloading will
be postponed until suitable arrangements can
be made.
Please contact the Customer Service team for pricing and availability.
Please note:
EGGER Panel Size*: 2800x2070x18mm
*EGGER Compact Laminate panels are 2790x2060x13mm and weigh 101kg each
1300 088 066
[email protected] | forest1.com/egger