new xitanium - philips · 2020. 6. 3. · xitanium led driver datasheet xitanium non-isolated sr...
TRANSCRIPT
Xitanium
LED driver
Datasheet
Xitanium non-isolated SR dimmable & programmableXitanium 100W 0.25-0.7A 220V SR 230V9290 016 95606
Because light is all around us, the lighting infrastructure is an ideal platform for collecting and carrying information. The Philips Xitanium SR drivers are sensor ready, making them perfect for use in building management systems. You can power and interfacewith sensors directly from the driver without the need for additional modules, devices or power packs. The versatile and scalable DALI-2 openstandard digital interface is used via a simple 2-wire connection to the sensor, so that you can confidently design flexible lighting, andincorporate your preferred sensors and networks, without worrying about potential incompatibilities.
Benefits• Sensor Ready concept, ideal for use with indoor sensors &
building management systems
• Integrated power supply over DALI-2 to power sensors
and wireless radios directly from the driver, open spec for
all OEMs, simplifying integration of sensors into the
luminaire
• Highly accurate integrated power metering for use in
building management systems
• Certified per DIIA intra-luminaire standard D4i
• Suitable for central emergency DC operation
Features
• Integrated Bus Power Supply for sensors and radios (DALI part 250)
• SimpleSet configuration interface (NFC)
• Configurable operating windows (AOC)
• Dimming supported during DC operation (DCemDim)
• Constant Light Output (CLO)
• Adjustable Light Output (ALO)
• OEM Write Protection (OWP)
• Memory Bank 1 Extension / Luminaire Data (DALI part 251)
• Energy reporting (DALI part 252)
• Diagnostics & Maintenance (DALI part 253)
Application
• Offices
• Healthcare
• Education
• Retail: supermarkets, shopping malls
December 2020
Electrical input data
Specification item Value Unit ConditionRated input voltage range 220...240 Vac Nominal range
Rated input voltage 230 Vac
Rated input frequency range 50...60 Hz Nominal range
Rated input current 0.49 A @ rated output power @ rated input voltage
Rated input power 107 W @ rated output power @ rated input voltage
Power factor 0.9 @ rated output power @ rated input voltage
Total harmonic distortion 20 % @ rated output power @ rated input voltage
Efficiency 94 % @ rated output power @ rated input voltage
Rated input voltage DC range 186...250 Vdc Performance range
Input voltage AC range 202...254 Vac Operational range
Input frequency AC range 47.5...63 Hz Operational range
Input voltage DC range 168...275 Vdc Operational range
Standby Power 0.3 W
Isolation input to output No
Electrical output data
Specification item Value Unit ConditionRegulation method Constant Current
Output voltage 50...220 Vdc
Output voltage max. 250 V Maximum output voltage (rms)
Output current 0.25...0.7 A
Output current min programmable 250 mA
Output current min dimming 4.5 mA
Output current tolerance ± 5 %
Output current ripple LF ≤ 4 % Ripple = peak / average, < 3kHz
Output current ripple HF ≤ 4 %
Output PstLM ≤ 1
Output SVM ≤ 0.4
Output power 28...100 W
Electrical data controls input
Specification item Value Unit ConditionControl method SR DALI Parts: 101, 102, 207, 250, 251, 252, 253
Dimming range 1...100 % With AOC >250mA 1% dimming possible; AOC <250mA min.
physical current = 4.5mA
Isolation controls input to output Double acc. IEC61347-1
SR output voltage max. 22.5 V
SR guaranteed current 52 mA
SR maximum current 60 mA
2 / 9 Xitanium 100W 0.25-0.7A 220V SR 230V December 2020
Wiring and Connections
Specification item Value Unit TypeInput wire cross-section 0.5...1.5 / 20...16 mm2 / AWG WAGO744, solid wire
Input wire strip length 8...9 mm
Output wire cross-section 0.5...1.5 / 20...16 mm2 / AWG WAGO744, solid wire
Output wire strip length 8...9 mm
Maximum cable length 2 m Total length of wiring including LED module, one way
Insulation
Insulation per IEC61347-1 Input Output SR-interface HousingInput Non Double Basic
Output Non Double Basic
SR-interface Double Double Basic
Housing Basic Basic Basic
3 / 9 Xitanium 100W 0.25-0.7A 220V SR 230V December 2020
Dimensions and weight
Specification item Value Unit Tolerance (mm)Length (A1) 360 mm
Mounting hole distance (A2) 350 mm
Width (B1) 30 mm
Height (C1) 21 mm
Mounting hole diameter (D1) 4.1 mm
Weight 284 gram
Logistical data
Specification item ValueProduct name Xitanium 100W 0.25-0.7A 220V SR 230V
EOC 871951426411300
Logistic code 12NC 9290 016 95606
EAN1 (GTIN) 8719514264113
EAN3 8719514264120
Pieces per box 24
Operational temperatures and humidity
Specification item Value Unit ConditionAmbient temperature -25...+50 ºC Higher ambient temperature allowed as long as Tcase-max is not
exceeded
Tcase-max 75 ºC Lifetime 50khrs;
Tcase-life 65 ºC Lifetime 100khrs; measured at Tc-point
Maximum housing temperature 110 ºC In case of a failure, inherent by design
Relative humidity 10...90 % Non-condensing
4 / 9 Xitanium 100W 0.25-0.7A 220V SR 230V December 2020
Lifetime
Specification item Value Unit ConditionDriver lifetime 100,000 hours Measured temperature at Tcase-point is Tcase-life. Maximum
failures = 10%
Mains switching cycles > 100,000 switches See Design-in guide for detailed explanation
Storage temperature and humidity
Specification item Value Unit ConditionAmbient temperature -40...+85 ºC
Relative humidity 5...95 % Non-condensing
Programmable features
Specification item Available Default setting ConditionSet Adjustable Output Current (AOC) LEDset, Programmable, SimpleSet 250 mA
NTC on LEDset Yes OFF
Adjustable Light Output (ALO) Yes OFF
Constant Light Output (CLO) Yes OFF
DALI 102 Yes ON Programmable via SimpleSet
DALI 253 M Yes —
Min Dim Level Yes 1 %
DC emergency (DCemDim) Yes ON Default 15%, EOFx range = 1 .. 100% (EOFx = DCemDIM level)
Dimming support at DC operating Yes OFF
OEM Write Protection (OWP) Yes OFF
SR PSU Yes ON
Luminaire Info Yes —
5 / 9 Xitanium 100W 0.25-0.7A 220V SR 230V December 2020
Features
Specification item Value ConditionOpen load protection Yes Automatic recovering
Short circuit protection Yes Automatic recovering
Over power protection Yes Automatic recovering
Hot wiring No
Suitable for fixtures with protection class I per IEC60598
Output Overvoltage Detection Yes
Energy metering Yes Accuracy 4%
Diagnostics Yes
Inrush current
Specification item Value Unit ConditionInrush current Ipeak 4.5 A Input voltage 230V
Inrush current Twidth 1000 µs Input voltage 230V, measured at 50% Ipeak
Drivers / MCB 16A type B ≤ 18 pcs Indicative value
MCB Rating Relative number of LED driversB 4A 25%
B 6A 40%
B 10A 63%
B 13A 81%
B 16A 100% (stated in datasheet)
B 20A 125%
B 25A 156%
B 32A 200%
B 40A 250%
C 4A 42%
C 6A 63%
C 10A 104%
C 13A 135%
C 16A 170%
C 20A 208%
C 25A 260%
C 32A 340%
C 40A 415%
Driver touch current / protective conductor current
Specification item Value Unit ConditionTypical Protective Conductor Current (ins. Class I) 0.5 mA rms Acc. IEC60598-1. LED module contribution not included
Surge immunity
Specification item Value Unit ConditionMains surge immunity (diff. mode) 1 kV Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Mains surge immunity (comm. mode) 2 kV Acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us
Control surge immunity (diff. mode) 1 kV Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Control surge immunity (comm. mode) 2 kV Acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us
6 / 9 Xitanium 100W 0.25-0.7A 220V SR 230V December 2020
Application Info
Specification item ValueApproval marks CCC / CE / D4i / EAC / EL / ENEC / RCM / SR / UA
Ingress Protection classification (IP) 20
Application Indoor Linear
Mounting Type Built-in
Graphs
Operating window
Power factor versus output power
7 / 9 Xitanium 100W 0.25-0.7A 220V SR 230V December 2020
Efficiency versus output power
THD versus output power
8 / 9 Xitanium 100W 0.25-0.7A 220V SR 230V December 2020
Notes
Standby Power: typical 0.3W, max 0.5W (No load on SR), max 1W (250mW load on SR).
This product includes software licensed under terms that require Signify Holding B.V. to display the following notice:
ASF: Release ASF-3.32The Atmel® Software Framework (ASF, www.atmel.com/asf) is a compilation of embedded software for Atmel flash MCUs: megaAVR®, AVR XMEGA®, AVR UC3 and SAM devices.It has been designed to help develop and glue together the different components of a software design. It can easily integrate into an operating system (OS) or run as astand-alone product.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materialsprovided with the distribution.3. The name of Atmel may not be used to endorse or promote products derived from this software without specific prior written permission.4. This software may only be redistributed and used in connection with an Atmel microcontroller product.THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE EXPRESSLY ANDSPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTEGOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCHDAMAGE.
©2020 Signify Holding, IBRS 10461, 5600 VB, NL. All rights reserved. UK importer address: Signify Commercial UK Limited, 3, Guildford Business Park, GU2 8XG.
The information provided herein is subject to change without notice. Signify does not give any representation or warranty as to the accuracy orcompleteness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this documentis not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or theirrespective owners. Date of release: December 10, 2020 v3
www.philips.com/oem