stormor shelvingNEW

®

We recognise that as markets and legislation

change, so do the demands this places on

our product range.

For example,

� Compliance with the new Freedom of

Information Act and the Data Protection Act

is now a legal requirement

� Both Acts demand quick and easy location

and retrieval of information

� Full access rights come into force in

January 2005

Similarly, as our economy becomes

increasingly reliant on the service sector,

volumes and methods of data storage

increase. Records in commercial sectors such

as finance continue to grow and quick,

easy-to-use filing systems help in the

provision of rapid-response customer service.

Changes such as these drive our product

development.

understandingfuture requirements

anticipatingyour needsInnovation in design is the key to ensuring our

products meet these demands. Essentially,

the goal is a shelving solution which makes

optimum use of all available space whilst

satisfying the huge range of demands posed

by the many different products and data

records which need accessible storage.

The challenge was to incorporate these

changing demands into a new shelving

system without compromising load capacity

and safety. Key design criteria were:

� Versatile, easy to install shelving with

minimum lost storage space

� A system sufficiently adaptable to

accommodate any product

� Comprehensive range of shelf and frame

sizes for both general and specific

requirements

� Easy-fit accessories to complement basic

components

� Minimum number of components with

maximum interchangeability

designing simply and efficiently

deliveringthe right solutionThe Stormor Shelving System:

� Slim profile shelves and frames

� Family of frames suitable for storage

needs from the commercial to the

workshop environment

� Clip-in accessories

� Tiered projects still

available by combining the

new shelves with the tried

and trusted Euro frame

Stormor - creating optimisedstorage solutions

Solo FrameSolid frame featuring a delta profilefront post with a T-section rear foreasy and immediate fitting of crossbracing and cladding.

Mono FrameClear entry, open shelving frame forheavier duty applications and where ventilation is required.

Duo FrameDouble skinned box section, clearentry frame. Also allows clear accessto the full shelf width, eliminating‘snagging’ of items stored. Complieswith clear access requirements ofBS5454.

Cross BraceProvides stability bracing for openback shelving. Used where rearcladding is not specified.

Rear Cladding Mesh CladdingCan be fitted to open frames and asrear cladding for all frame types.Retains visibility and ventilation for theitems stored.

Dual Use Shelf25mm section shelf with a formed openflange. Also carries suspension filingunderneath the shelf at appropriatedepths. Fits all above frames plus theEuro shelving frame.

Box Section Shelf25mm welded box section shelf onthe front and back edges for greaterload bearing capacity. Fits all aboveframes plus the Euro shelving frame.

Under-shelf DividerDivider simply clips in under the shelfto hold books, files etc upright. Dividercan be re-positioned as required. Foruse with Dual Use shelves only.

Vertical DividerUsed to divide shelves horizontallyinto smaller storage compartments.Reinforced leading edge providesextra strength. Easily repositionedon shelf.

Document DividerSlim profile divider ideal for paper andrecord storage. Ensures maximumuse of shelf capacity. Easily relocatedon shelf.

Part Height Dividers150mm high divider which slots either on top or below the shelf toprovide storage compartments orsupport for files and similar tallmaterial.

Solid interlocking steel sheets thatenclose the rear of the bay. Also givesessential stability to the bay structureas an alternative to cross-bracing.

1

17

Stormor ShelvInterchangeable Frames� 20mm front face � 25mm shelf pitch � Accepts double shelf clip� Frames share common shelf types, rear bracing, cross-bracing and accessories

Shelf Dividers� For dividing shelves into compartments � No additional fixing clip required� Slot into pre-punched holes in shelf

1 2 3

4 5 6

7 8 9

10 11 12

®

24 6

7 8

24

9

10

11

12

16

1413

18

23

19

22

ving - Creating optim

UPRIGHTS

STORMOR GREY*RAL 7035

Standard C

Pull-out Reference ShelfProvides a flat and stable worksurface for document or filereference within the aisle.

Back StopFits across the rear of bays toprevent files falling off the back of ashelf. Simply slots into the upright.

Half Height Door KitHinged 1100mm high door. Createssecure storage cupboard withinshelving. Doors are stiffened to the fullheight and have 2-point locking,recessed handle and safety key.

Plastic DrawersIdeal for the storage of small items.Available in 3 sizes, the drawers tilt onintegrated back-stops to allow easyviewing and access. Can also besub-divided internally using dividers.

3

5

0

15

20

21

mised storage soluti

* Denotes colours available on Speedrange. Swatches shown give an approximate colour guide only.

SHELVES

RACING GREENRAL 6005

SUAVE BLUE*BS 5252 20 E 56

GRAPHITE GREY*BS 5252 18 A14

MARINE BLUERAL 5001

TRAFFIC REDRAL 3020

STORMOR GREY*RAL 7035

Pull-out Accessories� Clip-in ball bearing supported runn� 100% extension for full access to s

13

16

19

22Component Colours

Pull-out DrawerIdeal for the storage of CD's, electronicmedia and other small items within ashelving bay. Available in 4 heights.

Frame Floor Clip

Full Height Door KitHinged doors transform shelving intoa secure storage cupboard. Doorsfeature full height vertical stiffener, 2-point locking, recessed handled and safety key.

Bin FrontsWhen fitted these prevent items fallingoff the front of shelves. Also whenused with shelf dividers they formenclosed compartments or ‘bins’. Canbe used as heavier duty back-stop.

Simple clip-in bracket which allows alltypes of Stormor frames to be floorfixed. Can be shimmed by usingStormor shim plates. Fits within bayfootprint.

Pull-out Filing CradleCan accommodate A4 and foolscaptop loaded suspension files.

Floor Plinth

Tambour Door KitRoller shutter doors for security anddust protection of items stored. Whenopen, door does not protrude intoaisle making this an ideal solution forsecure storage where aisles are narrow.

Clip-in Garment HangingSystem of rails and brackets which fitwithin bay widths to allow the hangingof garments. Rails can bere-positioned as required to createdouble hanging space.

Floor plinths prevent dust and debriscollecting under the shelving. Simplyclips to the underside of shelf tocreate a smooth overall finish of thefront face.

ionsners with integral stops � Fit all frame typestored material � Easily repositioned � No fixings required

NEW Stormor is now available to solve all shelving

problems:

� General office storage

� Dedicated office filing solutions

� Large archiving projects

� Specific demands such as healthcare records

� Heritage storage

� Retail storage

� Bulk off-site storage

� Workshops and stockrooms

� Industrial storage

� Dedicated interface with our own mechanically

assisted or electrically powered mobile systems

to truly maximise space utilisation.

All accessories fit in all shelves, and all shelves fit in

all frames. The comprehensive range of sizes and

accessories ensures Stormor makes specifying and

building shelving easier and quicker for more

versatile solutions.

Every project is designed to meet its specific

requirements, optimising storage space and

minimising waste.

14 15

17 18

20 21

23 24

storage solutions

For further information on these products, please contact your local distributor:

Stormor Shelving is only one element in our comprehensive portfolio. We can also provide:-

MOBILE SHELVING PALLET RACKING JUST SHELVING

HEAVY DUTY SHELVING ANGLE AND SQUARE TUBECONSTRUCTION SYSTEMS

SMALL PARTS STORAGE

MULTI TIER SHELVING PERSONAL STORAGE COMMERCIAL AND WORKPLACEEQUIPMENT

Member Company

Member CompanyCertificate No. FM 09409

Note: This publication shows general concepts only, and should not be used as a guide for specific design or assembly purposes. We reserve the right to alter the specification on any of these products, in the customer’s interest, without prior notification.