new product release: illumis ac led panel light module
DESCRIPTION
The Illumis AC-LED Panel Light Module is designed to replace existing DC-driven LED modules in LED panel light fixtures. Designing the revolutionary new Illumis AC-LED PLM module into your fixture, not only gives you a first to market opportunity; but also removes the requirement for an external driver (and bulky driver box) while also reducing over all component costs, and shipping costs - which ultimately gives your product a huge competitive advantage in a hugely competitive market. Our new range of high-voltage AC LEDs benefit from exactly the right driver conditions thanks to our proprietary Application Specific Integrated Circuits (ASICs). No driver to fail, no housing to frustrate lighting designers - and a very competitive price at the quality end of the market. Key advantages of the Illumis AC-LED modules: Unrivalled power efficiency at more than 92%, with a power factor greater than 0.9 Excellent reliability – the modules’ lifetime is limited only by the LEDs themselves and are projected at more than 50,000 hours at case temperatures of up to 85C Excellent dimming capability with ELV dimmers that vary the current to an entire LED array rather than individual banks of LEDs. As dimming is linear, individual banks of LEDs won’t turn off There are no electrolytic capacitors or magnetics giving form factor and reliability The drive current is easily adjustable with a simple, low power resistor offering design flexibility It’s possible to provide multiple lumen output variations with a single design Safety issues are greatly reduced because, with smaller components, the high voltage parts can be shielded with our unique 5VA-rated interwoven fibre. A laser-cut aperture enables the LEDs to emit directly into air Each board is UL recognized (being a self-contained unit allows for easy fixture listing).TRANSCRIPT
[email protected]+1 917 675 3395+44 20 8144 4481
2x2 Panel Light Module: AC-PLM
www.illumislights.com
Connects directly to AC - no driver or bulky driver box needed.
Unique encapsulation technology enables edge-lit designefficiency, never seen before in AC-LED.
Designs for both 110v and 220v, at multiple CCTand lumen outputsand lumen outputs.
UL recognised component enables easy fixture UL listing.
Full fixture lifetime that exceeds 50,000 hours.
Smooth, flicker-free dimming with ELV dimmers.
LM80 rated LEDs used for DLC certification.
Multiple board outputs enables 30-45W Multiple board outputs enables 30-45W panel designs.
Enables extra slim designs and considerably lower shipping costs.
[email protected]+1 917 675 3395+44 20 8144 4481
2x2 Panel Light Module: AC-PLM
www.illumislights.com
Photometric Performance
Detailed Drawings