1

> IP67> IP40

TESA electronic calipersUNIVERSAL TWIN-CAL IP 67, WORKSHOP TWIN-CAL IP 67, TWIN-CAL IP 40, VALUELINE IP 40

New design and innovative technologies for ease of use and better performance than ever

C/ONABS/

2.0

2

B

A

C

A

B

mm in A mm B mm00530421 0 ÷ 200 0 ÷ 8 5 8000530422 0 ÷ 250 0 ÷ 10 5 8000530423 0 ÷ 300 0 ÷ 12 5 9000530424 0 ÷ 500 0 ÷ 20 10 15000530425 0 ÷ 600 0 ÷ 24 10 15000530426 0 ÷ 800 0 ÷ 32 10 15000530427 0 ÷ 1000 0 ÷ 39 10 150

mm in A mm B mm C mm00530431 0 ÷ 200 0 ÷ 8 5 80 3000530432 0 ÷ 250 0 ÷ 10 5 80 3700530433 0 ÷ 300 0 ÷ 12 5 90 3700530434 0 ÷ 500 0 ÷ 20 10 150 6000530435 0 ÷ 600 0 ÷ 24 10 150 6000530436 0 ÷ 800 0 ÷ 32 10 150 5600530437 0 ÷ 1000 0 ÷ 39 10 150 56

UNIQUE FEATURES – Total IP67 protection from dust and water, even when connected to cable – The largest screen available on the market with 11 mm digit height – Battery life of over 12,000 hours – ABS measurement mode – Unique TWIN & LINK connectivity concept providing upgradeable performance for the entire TWIN-CAL range

– “Soft touch” features for easy measurements

Models with rounded measuring faces for internal dimensionsand knife-edge jaws for external dimensions

Models with rounded measuring faces for internal dimensions

Workshop electronic calipers

> TWIN CAL IP67✔

ISO 13385-1

0,01 mm / 0.0005 in

LCD, 11 mm

Floating zero

Conversion mm / in≤100 mm: 20 µm >100 - ≤600: 30 µm>600 - ≤1000: 40 µm

10 µm

Scale with incre-mental divisions, inductive

2,5 m / s

RS232 mono- and bi-directional

Hardened stainless steel

3V lithium battery, CR 2032

12,000 hours

Standby mode after 10 min, ins-trument retains

zero. Automatic switch off after 2 hours, instrument retains zero in ABS mode, zero must be reset in DIFF mode

-10°C à 60°C

10°C à 40°C

100%

IP 67

1907/2006/CE 2004/108/CE 2002/96/CE

Suited plastic caseInspection report with declaration of conformity IdentificationNumber

TWIN compatible

C/ONABS/

2.0

3

8,5

4 12

10

15,5

12

24,5

5

12

CB

A

A

4

B

A

B

A

B C

mm in A mm B mm C mm00530430 0 ÷ 250 0 ÷ 10 5 80 54

Models with rounded measuring faces and knife-edge jaws for internal dimensions

Electronic depth calipers

Models with short cut measuring faces or one or two fixed jaw(s)

mm in A mm B mmModels A, with short-cut measuring faces00530441 0 ÷ 200 0 ÷ 8 100 800530442 0 ÷ 250 0 ÷ 10 100 800530443 0 ÷ 300 0 ÷ 12 150 800530444 0 ÷ 500 0 ÷ 20 150 8

Models B, with one fixed measuring jaw00530445 0 ÷ 300 0 ÷ 12 150 800530446 0 ÷ 500 0 ÷ 20 150 8

Models C, with two fixed measuring jaws00530447 0 ÷ 300 0 ÷ 12 150 8

✔

ISO 13385-1

0,01 mm / 0.0005 in

LCD, 11 mm

Floating zero

Conversion mm / in≤100 mm: 20 µm >100 - ≤600: 30 µm>600 - ≤1000: 40 µm

10 µm

Scale with incre-mental divisions, inductive

2,5 m / s

RS232, mono- and bi-directional

Hardened stainless steel

3V lithium battery, CR 2032

12,000 hours

Standby mode after 10 min, ins-trument retains

zero. Automatic switch off after 2 hours, instrument retains zero in ABS mode, zero must be reset in DIFF mode

-10°C à 60°C

10°C à 40°C

100%

IP 67

1907/2006/CE 2004/108/CE 2002/96/CE

Suited plastic caseInspection report with declaration of conformity IdentificationNumber

TWIN compatible

Models with rotary stop plate

mm in A mm B mm00530448 0 ÷ 250 0 ÷ 10 150 8,500530449 0 ÷ 350 0 ÷ 14 150 8,500530450 0 ÷ 500 0 ÷ 20 150 8,5

C/ONABS/

2.0

4

AB

C ± 0,005

Ø2

50

B

A

40 14

6,8

30

3068,5

4,3

14

18,1

2 x M3

DIN74-Km5

Horizontal scale

Accessories for electronic depth calipers

mm in A mm B mm00530471 0 ÷ 150 0 ÷ 6 265 27800530473 0 ÷ 300 0 ÷ 12 415 42800530474 0 ÷ 600 0 ÷ 24 725 73800530475 0 ÷ 1000 0 ÷ 40 1135 1148

Small model with steel tip

mm in00530451 0 ÷ 25 0 ÷ 1

mmmm A mm B mm C mm mm mm µm

00560103 Removable base attachment 200 11,5 10 ± 0,005 0,02 800560104 Removable base attachment 300 16 16 ± 0,005 0,02 1000560105 Removable base attachment 400 16 16 ± 0,005 0,03 1001961000 3V lithium caliper battery

Fixation system always delivered with removable base attachments

✔

ISO 13385-1

0,01 mm / 0.0005 in

LCD, 11 mm

Floating zero

Conversion mm / in≤100 mm: 20 µm >100 - ≤600: 30 µm>600 - ≤1000: 40 µm

10 µm

Scale with incre-mental divisions, inductive

2,5 m / s

RS232, mono- and bi-directional

Hardened stainless steel

3V lithium battery, CR 2032

12,000 hours

Standby mode after 10 min, ins-trument retains

zero. Automatic switch off after 2 hours, instrument retains zero in ABS mode, zero must be reset in DIFF mode

-10°C à 60°C

10°C à 40°C

100%

IP 67

1907/2006/CE 2004/108/CE 2002/96/CE

Suited plastic caseInspection report with declaration of conformity IdentificationNumber

TWIN compatible

Thickness 7,4

Milling

2,5 in depth

C/ONABS/

2.0

5

13

C

B

A

ø1.5

15.5

3.2

13

C

B

A

ø1.5

15.5

3.2

13

C

B

A

ø1.5

15.5

3.2

> VALUELINE IP40

>TWIN CAL IP40

>TWIN CAL IP67

TESA ValueLine is a brand designed by TESA to meet the demands of clients who are not willing to compro-mise on TESA know-how and are looking for high quality affordable products. The Swiss technology at the heart of our products also provides additional quality assurance.

mm in Thumb roller A mm B mm C mm Depth Rod00530319 0 ÷ 150 0 ÷ 6 – 40 16 74 00530320 0 ÷ 150 0 ÷ 6 – 40 16 74 •00530321 0 ÷ 150 0 ÷ 6 • 40 16 74 •00530322 0 ÷ 200 0 ÷ 8 • 50 20 90 00530323 0 ÷ 300 0 ÷ 12 • 64 22 106

mm in Thumb roller A mm B mm C mm Depth Rod00530097 0 ÷ 150 0 ÷ 6 – 40 16 74 00530094 0 ÷ 150 0 ÷ 6 • 40 16 74 •00530095 0 ÷ 200 0 ÷ 8 • 50 20 90 00530096 0 ÷ 300 0 ÷ 12 • 64 22 106

mm in Thumb roller A mm B mm C mm Depth Rod00539090 0 ÷ 150 0 ÷ 6 – 40 16 74 00539091 0 ÷ 150 0 ÷ 6 – 40 16 74 •00539092 0 ÷ 200 0 ÷ 8 • 50 20 90 00539093 0 ÷ 300 0 ÷ 12 • 64 22 106

TWIN-CAL

VALUELINE

ISO 13385-1

0,01 mm / 0.0005 in

LCD, 11 mm

Floating zero

Conversion mm / in

≤100 mm: 20 µm >100 - ≤300: 30 µm

10 µm

Scale with incre-mental divisions, inductiveTWIN-CAL capacitiveVALUELINE

TWIN-CAL 2,5m/sVALUELINE 1,6 m/sRS232, mono- and bi-directional(TWIN-CAL)

Hardened stainless steel

Pile Lithium 3V, CR 2032

12’000 hours

Standby mode after 10 min, ins-trument retains

zero. Automatic switch off after 2 hours, instrument retains zero in ABS mode, zero must be reset in DIFF mode

-10°C à 60°C

10°C à 40°C

1907/2006/CE 2004/108/CE 2002/96/CE

Suited plastic caseInspection report with declaration of conformity IdentificationNumber

TWIN compatible

C/ONABS/

2.0

6

C/ON ABS/

2.0DIGIMATIC

C/ON ABS/

2.0

C/ON ABS/

2.0

> CONNECTIVITY

> TLC-USB

> TLC-DIGIMATIC

> TLC-TWIN

m Interface04760180 TLC-TWIN – 0503001204760181 TLC-USB 2 –04760182 TLC-DIGIMATIC 2 –

Connections compatible with all TESA TWIN-CAL IP67 / IP40 models

0476018005030012

04760181

04760182

C/ONABS/

2.0

7

> TESA Portable PrinterIntelligent printer designed for the inspection of finished parts or incoming goods – Provides SPC statistics and prints out measurement results with graphical representations.

Can be connected to TESA measuring instru-ments, but also to those provided with a DIGIMA-TIC output – Your TESA PRINTER SPC is capable to recognise the plug in tool and will execute the appropriate configuration, automatically.

– Memory capacity: 9999 single values for one feature per sample.

– Two operating modes: «Normal» and «Tolerance».– Limits of size quickly set on the display of the

connected instrument with subsequent transfer to TESA PRINTER SPC.

– Output of statistical values printed out with graphical representations.

– Output of reports with headings to be filled in by the operator.

– Hardcopies printed in preferred language (English, German, French, Italian or Spanish).

– Battery-powered (6 V) printer unit for use on the fly (optional).

TESA PRINTER SPC

Normal Tolerance

Statistical featuresLower limit of size (LSL) – •Upper limit of size (USL) – •Tolerance – •Number of captured values:– sampling extent • •– < lowest size – •– > highest size – •– out of tolerances in per-cent – •Lowest list value • •Highest list value • •Value dispersion R • •Arithmetical mean x • •Standard deviation σn, σn-1 • •Process capability Cp, Cpk – •Graphical RepresentationsPosition of each single value within the tolerance range (10 classes)

– •Histogrammes – •Display (luminous LEDs)

Sorting of each single value with green for Good, yellow for Rework and red for Reject

– •

✔

Matrix printer using thermal paper rollPaper width: 110 mm. Print mode: 40 signs/lineRS232 for data inputs (9-pin male,

trapezoid connector) DIGIMATIC (Ansley connector, 10-pin)Connector with mini-jack for remote triggering of data transfer

Mains adapter 100 to 240 Vac, 6,6 Vdc. Optional

accessory: 6 V battery pack, rechargeable

10 °C to 40 °C

– 10 °C to 60 °C

IP40 (CEI 60529)EN 50081-1,EN 50081-2, EN 50082-1, EN 50082-2

180 x 180 x 84 mm (L x P x H)

0,55 kg

Shipping packaging

Identification number

Declaration of conformity

06430000 TESA PRINTER SPC Printer with SPC capability, value classification and memory.Prints all results with graphical representations using the matrix printer provided with a 110 mm wide thermal paper roll; RS232 interface.

Supplied with the following accessories04765013 1 Thermal paper roll, 110 mm in width04761054 1 Adapter 100 to 240 Vac, 50 to 60 Hz, 6,6 Vdc, 750 mA04761055 1 EU adapter cableOptional accessory04760182 TLC-Digimatic cable to connect the SPC printer to the TWIN-CAL

–

8

> www.tesabs.ch

TESA SA Switzerland Bugnon 38CH-1020 RenensVente SuisseTél. +41 (0)21 633 16 00Fax +41 (0)21 633 17 57tesa-ventech@hexagonmetrology.com

TESA FRANCE SAS2 rue Antoine LavoisierPôle Lavoisier – Bâtiment AF-54300 Moncel-lès-Lunéville Tél. +33 (0)3 83 76 83 76 Fax +33 (0)3 83 74 13 16tesa-france@hexagonmetrology.com

TESA Technology Deutschland GmbHNetzestraße 32 D-71638 LudwigsburgTel. +49 (0)7141 8747 0Fax +49 (0)7141 8747 88 tesa-de@hexagonmetrology.com

TESA Technology UK Ltd.Metrology HouseHalesfield 13 Telford, Shrops. TF7 4PLTel. +44 1952 681 349Fax +44 1952 681 391tesa-uk@hexagonmetrology.com

TESA Technology ITALIA s.r.l. Via Bizzozzero, 118IT-20032 Cormano (MI) Tel. +39 02 663 053 69Fax +39 02 663 090 82tesa-italia@hexagonmetrology.com

TESA Technology IbéricaAv. de Vizcaya s/nApart. 202 ES-48260 ErmuaTel. +34 943 170 340Fax +34 943 172 092tesa-iberica@hexagonmetrology.com

TESA BeneluxVan Elderenlaan 1NL-5581 WJ Waalre

Tel. +31 (0)40 222 06 08Fax +31 (0)40 222 17 16tesa-benelux@hexagonmetrology.com

TESA SA – Bugnon 38 – CH-1020 Renens – Switzerland – Tel. +41(0)21 633 16 00 – Fax +41(0)21 633 75 35 – www.tesabs.ch – tesa-info@hexagonmetrology.com

Main window

Tabbed functions for improved traceability

Listed measurements within a third-party software, e.g. MS Excel

User-defined commands

Direct value displaying

This software solution is an easy way to collect and report in real time all measured values taken with nearly any TESA’s precision tools featuring an RS 232 data output.

DATA-Direct is provided with serial input/output drivers specially configured for TESA’s products, but also for those purchased from other manufacturers. It works effectively for data transfer to your data sheets, database, statistical modules or any other Windows-based applications.

With this user-friendly software you will be able to create your own reports for the relevant part inspection

> DATA-Direct

04981001 TESA DATA-DirectSoftware including– CD for installation – USB dongle– Instruction manual (PDF)

All modifications reserved - 0512.150.1304