DCFC EV DISTRIBUTION KIOSK

Used to add an additional 200A 600V 3Ø secondary service for the purpose of powering modern DCFC EV (Electric Vehicle) Chargers. Distribution and metering kiosk built to BC Hydro’s distribution standards. Outputs for single 100A 480V DCFC. Can be configured for additional DCFC level 3 car chargers and Level 2 car chargers as well as additional site power requirements. Certified for use as service entrance.

*For custom options, speak with your sales representative.

• Fully Welded CSA Construction• Built from Marine Grade Aluminum• Designed for Pad Mount Applications• Stainless Steel 3 - Point Handle c/w Dual Padlock

Provision• BC Hydro Bus with Grounding Stud• Outgoing Terminals• 21 kA Rated Main Breaker• Dead Front/Touch Safe Interior• Viewing Window For Meter Base• Appropriate Climate Control (Under Most

Circumstances)

• Custom Size Enclosures• Custom Colour Powder Coating• Additional Charger Configurations• CSA 1, 3R, 3, 4 or 4X Ratings• Different Distribution Ratings• Convenience Receptacle• Additional Distribution Ratings• Interior Mounted Meter Base c/w Viewing Window• Insulation• Space available for future expansion

F E A T U R E S O P T I O N S

Main Tel: 604-540-0011 www.codeelectric.com sales@codeelectric.com

CAT No: MAIN BREAKER VOLTAGE FOR 21kA BCHDCFC-200-3 200A 3 600V

RATINGS: CSA CERTIFIED 3R ENCLOSURE

PHASE SIZES55 x 80 x 30

NEW

APPROVED BY BC HYDRO FOR STANDARDES54 S2-01.04 R8

February 2019