new catalog januar 2019 - paladin healthcare llc · sm101-pm notes: plastic coated wire u-shaped...

PRODUCT CATALOG

01-03-19

Architectural Solutions for Clinical Environments

IF YOU NEED IT, WE CAN DO IT!THE WORD “NO” IS NOT IN OUR VOCABULARY!

Rail Mount Kit for Owner provided Scrub Holder

Holder for Crutches

Rail Mount Kits for Art Work

Rail Mount Kit for Thermo

Scan

Rail Mount Kits for First Aid Kits

Rail Mount Kit for Flash Light

Rail Mount Kit for Power Bar

Rail Mount Kit for Mirror

940 W. Oakland Ave, Suite A1Oakland, FL 34787

(407) 614-8781 ph | (407) 641-8782 faxwww.paladinhc.com | [email protected]

3

Table of Contents

Medical Equipment Management Rail 6Diagnostic Equipment Management 10Infection Control Devices 15Soap / Sanitizer / Wipes 17Paper Towel Dispensers 20Glove Box Dispensers 23PPE Dispensers 26Sharps Containers 32Baskets and Bins 34Clips, Hooks and Wire Management 39Shelves and Work Surfaces 43Monitor Mounting and Cable Management Tools 46Vacuum and Medical Gas 51IV, Lighting and others 56Miscellaneous Accessories 59FERNO 64Mobile Treatment and Transport Systems 68Medical Gas Headwall Systems 74Equipment Management 77Managing Very Tight Spaces 78Process and Inventory Management Transformation 79Lean Inventory Control 80Infection Control 81Terminal Cleaning 82

4

Accessories now available for Modular and AMICO Style Rails



5

How to read our part numbers (*very important*)Part numbers ending in “-P” = Plate (Rail Mounting Solution without Accessory) This means the item to be mounted is NOT included in the purchase. It’s just the mounting plate and adapter kit necessary to mount the item to the rail. Some additional installation maybe required to a 3rd party device.Part numbers ending in “-PM” = Plate Mounted (to item)This means the item itself is Paladin factory mounted to the plate and adapter kit necessary to mount the item to the rail. The item and adapter kit are both included in the price. Maybe used for its intended purpose out of the box.Part numbers including “HV” = Horizontal or Vertical (mounting options)This means the mounting plate has integral options for mounting the item either horizontally, or vertically, on the rail. You and your sales rep will specify the initial orientation of the item and will receive it from the factory ready to hang in the orientation specified.If a field change is required, simply remove the adapters and relocate them into the alternate hole pattern.

How our Evolution rail system worksFor an image-based explanation, see page 6: “Required Parts and Pieces”We use a 3-Part system to turn your wall mounted items into a componentized method of mounting and managing your equipment in a way that is flexible, adaptable, and expandable now and throughout the lifecycle of the facility.

1. Rail (Evolution Equipment Rail)2. Plate + Adapter = Mounting Kit 3. traditionally wall mounted Item

The mounting kit marries the traditionally wall-mounted item to the rail. Items can be locked in place on the rail by tightening the Allen screws on the bottom of the adapter.

When a change of devices or process is necessary, simply snap the item off of the rail, snap it onto the rail in its new location, test your new workflow process, and lock the items to the rail when the layout is efficient. Change is a Snap!

We have hundreds of product mounting solutions availableIf you don’t find what you need in this catalog, please call us! We might have a solution already! If we haven’t, we are more than happy to design one for you!

6

Evolution

Fairfield-StyleMedical Equipment Management Railand Accessories System

7

EVOLUTION: Required Parts and Pieces Paladin Healthcare’s Fairfield-style Equipment Rail System

End Cap Rail Screw holes drilled at 16” on center

Adapter behind mounting plate

Adapter and Mounting plate are attached together as a single “mounting kit” by Paladin Healthcare. Simply attach the pre-fabricated kit to the rail and hang the device onto the screws.

mounting plate

Screws that match size and location of hole pattern found on the back of the device

Mounting PlateAdapters – every “mounting kit” includes an adapter Device

**The Mounting Kit is determined by the device to be hung on the rail. User provides device specification.**

Paladin’s Fairfield-style Equipment Rail with inlay

8

EVOLUTION Equipment Management Rail: a seamless, extruded aluminum profile with clear anodized finish containing a groove for attaching an adapter that supports the Owner supplied specified hospital accessories and equipment and includes termination caps at each end. The groove and adapters are designed so that the adaptor requires a seven degree tilt for attachment. The rail is designed to accommodate a seamless Wilsonart laminate decorative color inlay the length of the rail up to ten feet in length.

EVOLUTION Equipment Management Rail shall be specified in one to ten foot lengths as shown on drawings or indicated on purchase order to accommodate room conditions. Rail will be cut to exact lengths as indicated. For lengths greater than ten feet, a JOINER piece is used to attach together multiple pieces of rail to meet the required total length. **The length of the rail is nominal for the rail only and does not include the end caps. Use of two end caps increases the total length of the rail by ½”.

EVOLUTION Equipment Management Rail is pre-drilled on sixteen-inch centers (minimum) with the exception of a one-foot rail length which has two mounting holes drilled at eight inches on center. The Rail may also be field drilled by the installer to accommodate specific job site conditions.

End caps shall be constructed of injected molded thermoplastic and shall resist most hospital cleaning and disinfecting chemicals. The color shall be white and molded throughout the material. End caps shall be friction-fit without use of fastening devices.

Decorative inlay shall be supplied by Paladin for installation by the owner or contractor. Inlay is Wilsonart laminate in the standard finish which will resist most hospital cleaning and disinfecting chemicals. Color shall specified by the Owner. Specialty coating finishes can be made available for additional cost and lead time. Alternate laminate manufacturers may be specified for additional cost and lead time. Contact manufacturer for details.

Option to powder coat rail with anti-microbial finish (AMF) in select colors. Contact manufacturer for details.

PART NUMBER: R-2XX

** Image shown is a seamless fit in a modular casework application and does not include end caps. **

EVOLUTION Fairfield-Style Equipment Management RailSPECIFICATION: By Paladin Healthcare™ LLC

FOR THE OFFICIAL CSI MASTER FORMAT SPECIFICATION, PLEASE REQUEST IT FROM THE MANUFACTURER.

9

EVOLUTION: RAIL INSTALLATION INSTRUCTIONS

** Installer MUST use 1/4” mounting hardware appropriate to wall construction type or to the installation method required.Contact manufacturer with any installation questions at (407) 614-8781** Refer to the relevant elevation drawings and other specification documentation for quantity and location details for each project.

Stud Mount

Drywall Mount WITHOUT Backing

1. Position and level the “Evolution” rail on the wall at the correct height and location as shown on the elevation drawings. Mark location on wall.

2. Align holes in rail with studs. If required, drill new holes into rail to align with stud locations.

3. Using a 1/4” sheet metal screw, securely fasten the screws through the rail and drywall and into the studs. Ensure a tight fit between rail and wall.

4. Insert supplied inlay strip into grooves and secure end cap.

1. Position and level the “Evolution” rail on the wall at the correct height and location as shown on the elevation drawings. Mark location on wall.

2. Mark through each of the pre-drilled holes in the rail onto the drywall.3. Remove the rail and securely install 1/4” toggle-type wall anchors in locations as

marked.4. Realign the rail holes with the installed wall anchors and tightly secure the rail to

the wall with the 1/4” wall anchor machine screws. Ensure a tight fit between rail and wall.

5. Insert supplied inlay strip into grooves and secure end cap.

Wall Anchor types A + B

Drywall Mount WITH Backing (metal or wood)Follow Drywall Mount instructions 1 + 2 below. Use 1/4” screws to securely mount the rail to the wall. For sheet metal backing use sheet metal screws. For wood backing, use wood screws. Ensure a tight fit between rail and wall. Finish with inlay strips and secure end cap into position.

1. When rails are mounted in accordance to manufacturer’s installation instructions, rail shall accommodate function loading up to 62 foot pounds of torque per foot between 16” centers.

2. The recommended Evolution Equipment Rail loading should not exceed 20 pounds of weight per linear foot.3. The Evolution Equipment Rail loading capability is as well a function of dry wall load bearing capacity, drywall

mounting/installation, and quality of installation hardware.

10

Diagnostic Equipment ManagementRail Mounting Solutions


11

PART NUMBER:

DESCRIPTION: Mounting kit for Welch Allyn aneroid BP sphygmomanometer Tycos 509 (Welch Allyn product is not included)

DEM106-P

NOTES: Suggested for use with SM101

PART NUMBER:

DESCRIPTION: Mounting kit for Baum aneroid BP sphygmomanometer (Baum product is not included)

DEM116-P

NOTES: Suggested for use with SM101

PART NUMBER:

DESCRIPTION: BP cuff basket factory attached to mounting kit

SM101-PM

NOTES: Plastic coated wire U-shaped basket. Max load 4lbs.7”H x 6.75”W x 4”D

PART NUMBER:

DESCRIPTION:

NOTES:

DEM103-P

Welch Allyn 71420 tray for 71140 Desk charger, incl. Rail Mount Kit (Welch Allyn products are not included)

1.5”H x 7.5”W x 4.75”D

12

PART NUMBER:

DESCRIPTION: Mounting kit for Welch Allyn Ophthalmoscope (models 767/777)(Welch Allyn products are not included)

DEM108-P

PART NUMBER:

DESCRIPTION: Mounting kit for Welch Allyn Specula holders (Welch Allyn product is not included)

DEM109-P

PART NUMBER:

DESCRIPTION: Mounting kit for Welch Allyn “Sure Temp” thermometer model 692 (Welch Allyn product is not included)

DEM110-P

13

PART NUMBER:

DESCRIPTION: Mounting kit for Welch Allyn “Connex” Spot Monitor (Welch Allyn products are not included)

DEM104-P

NOTES: Kit includes: Monitor mount, Power Supply mount, Cord bundler and BP cuff basket

PART NUMBER:

DESCRIPTION: Mounting kit for Welch Allyn “Connex Integrated Wall System” comprehensive diagnostic center (Welch Allyn products are not included)

NOTES: Adapter plate includes pre-installed adapters and wall stand-offs

DEM105-P

PART NUMBER:

DESCRIPTION:

DEM100-4-P

Complete set of rail, adapters and BP cuff basket for the equipment components of the Welch Allyn 777 Diagnostic instruments on a 4ft Rail (Welch Allyn products are not included)

14

PART NUMBER:

DESCRIPTION: Mounting kit for Welch Allyn 300 Series Vital Signs Monitor (Welch Allyn products are not included)

DEM167-P

NOTES: Mounting kit includes monitor arm and GCX channel factory mounted to the adapter.

PART NUMBER:

DESCRIPTION: Rail mount adapter kit for Welch Allyn S-shaped Spot monitors with horizontal monitor mount (Welch Allyn products are not included)

NOTES:

DEM164-P

Various part numbers available for this monitor typePart Number: 42NTB-E1 - GTIN: 00732094005714

Welch Allyn Spot Vital Signs Device with Nellcor SpO2, SureTempThermometry, Non-invasive Blood Pressure, Pulse Rate, MAP; 120 V, 60 Hz AC, Lithium Ion (#105631) Battery; IEC Plug Type-B

PART NUMBER:

DESCRIPTION: Rail Mount Kit for Owner Provided wall mount for Welch Allyn Thermometer Thermoscan Pro 6000 (Welch Allyn product is not included)

DEM170-P

15


Infection Control DevicesRail Mounting SolutionsSoap / Sanitizer / WipesPaper TowelsGloves / PPESharps Containers

16

PROBLEM: Per the CDC, many studies have shown that the bacteria that cause hospital-acquired infections are most frequently spread from one patient to another on the hands of healthcare workers.In 34 studies of hand washing, workers washed their hands only 40% of the time.

SOLUTION: Create a standard directional flow with easy access to sink and hand washing accessories at the room entry. “…placing the hand washing accessories on an equipment rail allows adjustment in the system without creating damage to the wall and potential home for pathogens.”

Published by The Center for Health Design 2011

17

Soap / Sanitizer / Wipes

Rail Mounting SolutionsFor Every Brand and Model Number

18

PART NUMBER:

DESCRIPTION: Rail Mount Kit, Universal for most wide body soap/sanitizer dispensers(Dispenser and sanitizer is not included)

IC110-P

NOTES: Adjustable for variable vertical placement of device

PART NUMBER:

DESCRIPTION: Rail Mount Kit, Universal for most narrow body soap/sanitizer dispensers(Dispenser and sanitizer is not included)

NOTES:

IC111-P

Dispenser model needs to be confirmed at the time of order

PART NUMBER: IC136-P

DESCRIPTION: Rail Mount Kit, for Steris Kindest Care Foam Hand Sanitizer (Dispenser and sanitizer is not included)

19

PART NUMBER:

DESCRIPTION: Rail Mount Kit, Universal for Aerosol Foam Dispensers with Drip Pan Extension 9 oz. or 17 oz. (Steris/ Ecolab)(Foam, Dispensers and Drip Pan Extensions are not included)

IC117-P

PART NUMBER:

DESCRIPTION: Universal width adjustable holder and rail mount kit for most brands of sanitizing wipes(Wipes are not included)

IC112-PM

NOTES: Also works to hold some industrial style spray bottles


DESCRIPTION: Rail Mount Kit for Steris Germicidal Surface Wipes Holder, Rail Mount Kit Only(Holder and Dispenser is not included)


DESCRIPTION: Rail mount kit for “Wire Cage Style” wipes mounting, e.g. PDI or CaviWipes(Holder and Dispenser is not included)

20

Paper Towel Dispensers


21

PART NUMBER:

DESCRIPTION: Rail Mount Kit, Universal for half size tri-fold paper towel dispensers (i.e. Kimberly Clark, Georgia Pacific)

Dispenser is not included!

IC401-P

PART NUMBER:

DESCRIPTION: Rail Mount Kit, Universal for most paper towel holders, Sharps Containers etc. with slotted mounts on back (Dispenser is not included)

NOTES:

IC416-P

Includes plates with adapters and stand-offs

Adapters can be moved for adjustable vertical placement

PART NUMBER:

DESCRIPTION:

NOTES:

IC405-P

Rail Mount Kit for GA Pacific EnMotion paper towel dispensers (model 59462)(Dispenser is not included)

Specific model number must be verified prior to order placement

22

PART NUMBER:

DESCRIPTION: Rail Mount Kit for GA Pacific SofPull paper towel dispensers (models 52109,53009, 58201, 58217 and 58008)(Dispenser not included)

IC408-P

NOTES:

PART NUMBER:

DESCRIPTION: Rail Mount Kit for GA Pacific SofPull paper towel dispensers (models 58487 and 58470) (Dispenser not included)

NOTES:

IC411-P



PART NUMBER:

DESCRIPTION:

NOTES:

IC413-P

Rail Mount Kit for Kimberly Clark Professional (model 09335) (Dispenser not included)


23

Gloves Box Dispensers

Rail Mounting SolutionsFor Every Brand and Model NumberEvery Type, Size and Feed StylePlastic, Acrylic, Metal or Wire

(STAND-ALONE MOUNTING KITS FOR OWNER SUPPLIED DISPENSERS ARE AVAILABLE UPON REQUEST)

24

PART NUMBER: IC227-1-H-PM (Single)IC227-2-H-PM (Double)IC227-3-H-PM (Triple)IC227-4-H-PM (Quadruple)Horizontal top feed application

PART NUMBER:

DESCRIPTION:

PART NUMBER:

IC226-1-V-PM (Single)IC226-2-V-PM (Double)IC226-3-V-PM (Triple)IC226-4-V-PM (Quadruple)Vertical side feed application

Gloves box, heavy duty, ABS plastic with internal dividers

DESCRIPTION: Gloves box, ABS plastic with internal dividers

DESCRIPTION:

IC287-3-V-PM (Triple)IC287-4-V-PM (Quadruple)Vertical - side feed application only

Gloves box, heavy duty acrylicDual side loading

25

PART NUMBER:

DESCRIPTION:

IC287-1-H-PM (Single)IC287-2-H-PM (Double)IC287-3-H-PM (Triple)IC287-4-H-PM (Quadruple)Horizontal top feed application


Gloves box, heavy duty acrylic

Please note:

Sometimes a room layout changes…

By switching the adapters on the back,you can easily transform your horizontal glove box holder into a vertical glove box holder. You just need an Allen wrench!

Works for almost every Paladin glove box holder!

PART NUMBER:

DESCRIPTION:

IC257-1-H-PM (Single)IC257-2-H-PM (Double)IC257-3-H-PM (Triple)IC257-4-H-PM (Quadruple)Horizontal top feed application


Gloves box, stainless steel

26

PPE Dispensers

Custom Solutions

27

PART NUMBER:

DESCRIPTION: Bulk dispenser with lid, double bin, heavy duty clear acrylic

NOTES:

IC241-PM

(12.27”W x 11.13”H x 5.78”D)Bulk dispenser only

Custom built to customer specifications for size and product.MINIMUM QTY: 10

Custom acrylic products are available for nearly any item.

28

PART NUMBER:

DESCRIPTION: PPE dispensing cabinet, ABS plastic

NOTES:

IC271-PM

11.625”H x 18.5”W x 4.5”D (cabinet only)

Holds two boxes of gloves, one box of face masks, and one hand sanitizer bottle

PART NUMBER:

DESCRIPTION: PPE dispensing cabinet, ABS and PETG plastic

NOTES:

IC274-PM

23.5”H x 17.625”W x 5”D (cabinet only)

Holds three boxes of gloves, two boxes of face masks, multi-fold towels, and patient bibs.Tabs on both sides of unit to hang patient bib clips

PART NUMER:

DESCRIPTION:

NOTES:

IC275-HV-PM

PPE dispenser, small, ABS plastic

5.75”H x 13.75”W x 7”D (dispenser only)

Universal small box dispenser for shoe cover, cap, and other itemsHorizontal top feed or vertical side feed application

PART NUMER:

DESCRIPTION:

NOTES:

IC276-PM

PPE dispenser, large, ABS plastic

10.125”H x 12.55”W x 10”D (dispenser only)

Universal large box dispenser – shoe cover, cap, and other items

29

PART NUMBER:

DESCRIPTION: Stainless Steel Bulk Dispenser

NOTES:

IC268-PM

11.125”H x 12.25”W x 5.75”D (dispenser only)

Single compartment with hinged lid holds a variety of personal protection apparel; including gloves, bouffant caps, shoe covers, etc.

PART NUMBER:

DESCRIPTION: Face mask dispenser with mounting kit,ABS Plastic and Clear PETG plastic

NOTES:

IC245-PM

5”H x 8.75”W x 4.375”D (dispenser only)

Holds one box of earloop face masks in bulk quantity

PART NUMBER: IC301-PM

DESCRIPTION: Disposable Barrier Sleeves Dispenser, NA Acrylic, Heavy Duty, Clear, incl. Rail Mount Kit

NOTES: Holds one box

Tray Sleeves, Headrest Covers, X-Ray Sleeves, Chair Sleeves

30

PART NUMBER:

DESCRIPTION: Heavy duty acrylic pamphlet display

NOTES:

IC542-PM

15”H x 9.25”W x 6.25”D (dispenser only)Heavy Duty Acrylic, Dispenser only, incl. Rail mount kit with wall stand offs. Bottom of dispenser is slottet for easy cleaning

PART NUMBER:

DESCRIPTION: Surgical Mask Dispenser (fits Halyard Soft Touch II, #47500)

NOTES:

IC501-PM

9.25”H x 7.625”D x 4”W (dispenser only)Incl. Rail Mount Kit and Wall stand-off. Bottom of dispenser is slotted for easy cleaning


DESCRIPTION: Bouffant Cap or Shoe Cover Dispenser, Heavy Duty Acrylic, Clear, Bowman BB-034, incl Rail Mount Kit

NOTES: 8.375”H x 5.375”W x 8.25”D (dispenser only),Incl. rail mount kit and wall stand off. Bottom of dispenser is slotted for easy cleaning.

PART NUMBER:

DESCRIPTION:

IC543-PM

4 bin, top feed, surgical PPE dispenser, heavy duty acrylic, clear

NOTES: 7”H x 5.5”D x 23.75”W (dispenser only),Incl. rail mount kit and wall stand off. Bottom of dispenser is slotted for easy cleaning.

31

PART NUMBER:

DESCRIPTION: Scrub Brush Dispenser

NOTES:

IC298-PM

5.25“W x 5.25“D x 11“H, incl. Rail Mount Kit,(dispenser only), incl. Rail mount kit and wall stand off, heavy duty acrylic, bottom slotted for easy cleaning

PART NUMBER:

DESCRIPTION: 3M Aura Surgical Mask DispenserFor 3M Box #1860

NOTES:

IC533-PM

Inside dimensions 5.5“H x 4.625“W x 8.125“D, Rail Mount Kit incl. Dispenser, heavy duty acrylic, bottom slotted for easy cleaning


DESCRIPTION: 3M Aura Surgical Mask DispenserFor 3M Box #1870

NOTES: Inside dimensions 8.5“H x 9 5/8“W x 3.5“D, Rail Mount Kit and wall stand off incl. Dispenser, heavy duty acrylic, bottom slotted for easy cleaning, heavy duty acrylic

PART NUMBER:

DESCRIPTION:

NOTES:

IC526-PM

Bouffant Cap Dispenser for Halyard #69803

Dimensions 11“W x 11“H x 4“D, incl. Rail Mount Kit and Wall stand-off, dispenser only bottom of dispenser is slotted for easy cleaning, heavy duty acrylic

32

Sharps Containers


33

PART NUMBER:

DESCRIPTION: Mounting kit for sharpsContainer, e.g. Sharps-A-Gator(Container is not included)

NOTES:

IC416-P


PART NUMBER:

DESCRIPTION: Universal Mounting kit for Stericycle sharps containers, all sizes(Container is not included)

IC317-P

PART NUMBER:

DESCRIPTION:

IC303-P

Mounting Kit Only, for Owner Provided Standard Kendall / Covidien Sharps Container, all sizes, Universal(Container is not included)

PART NUMBER:

DESCRIPTION: Mounting kit only for Daniels “Sharpsmart” sharps container (S14 or S22)(Container is not included)

IC309-P (locking)IC304-P (non locking)

34

Baskets and Bins

Rail Mounting SolutionsFactory Attached to Accessories – No assembly required

35

PART NUMBER:

DESCRIPTION: Medium deep wire bin on pull-out glide with mounting kit

NOTES:

SM104-PM

Plastic coated wire basket

10”H x 16.25”W x 15.5”D / 23.5”D fully extended

PART NUMBER:

DESCRIPTION: Large deep wire bin on pull-out glide with mounting kit

NOTES:

SM105-PM

Plastic coated wire basket

10”H x 23”W x 15.5”D / 23.5”D fully extended

36

PART NUMBER:

DESCRIPTION: BP cuff basket with mounting kit

NOTES:

SM101-PM

To accommodate cuffs up to thigh-sized. Max load capacity 4lbs.

Plastic coated wire U-shaped basket

7”H x 6.75”W x 4”D (basket only)

PART NUMBER:

DESCRIPTION: Small wire basket factory attached to mounting kit

NOTES:

SM102-PM

Plastic coated wire basket. Max load capacity 5lbs.

4.25”H x 10”W x 7”D (basket only)

PART NUMBER:

DESCRIPTION: Large wire basket factory attached to mounting kit

NOTES:

SM103-PM

Plastic coated wire basket.Max load capacity 5lbs.

4”H x 18”W x 10”D (basket only)

37

PART NUMBER:

DESCRIPTION: 1 bin tilt-out storage container with mounting kit

NOTES:

SM201-1-PM

White plastic box with clear plastic bins

14”H x 12”W x 14”D (box only)

PART NUMBER:


NOTES:

SM201-2-PM


14”H x 24”W x 14”D (box only)

PART NUMBER:


NOTES:

SM201-3-PM


9.5”H x 24”W x 9.5”D (box only)

38

PART NUMBER:


NOTES:

SM201-4-PM


8.25”H x 23.75”W x 5.5”D (box only)

PART NUMBER:


NOTES:

SM201-5-PM


6.5”H x 23.75”W x 4.5”D (box only)

39

Clips, Hooks and Wire Management


40

PART NUMBER:

DESCRIPTION: 1 hook hanger - powder coated metal wire hook with integrated mounting plate and adapter

NOTES:

SM301-0.75 (3/4” hook)SM301-1.5 (1.5” hook)SM301-2 (2” hook)SM301-4 (4” hook)

Hook and integrated mounting plate in a powder coat painted anti-microbial finish(AMF)

2.5”H x 1.5”W x X”D (length of hook ¾”, 1 ½”, 2” and 4”)

PART NUMBER:

DESCRIPTION: 3 hook hanger - powder coated metal wire hooks with integrated mounting plate and adapter

NOTES:

SM301-0.75 (3/4” hook)SM301-2 (2” hook)SM301-4 (4” hook)

Hooks and integrated mounting plate in a powder coat painted anti-microbial finish (AMF)

2.5”H x 12”W x X”D(length of hooks available: ¾”, 2”, and 4”)

PART NUMBER:

DESCRIPTION:

SM304-PM

Cord Bundler, incl. rail mount kit with ABS antimicrobial plastic adapter

Slide action loop and clip to secure cords, cables, and wires, or to hold stethoscope.

3.5”H x 1.5”W x 0.75”D

NOTES:

41

PART NUMBER:

DESCRIPTION: Lead apron hook with integrated mounting plate and adapter

SM303-RoundSM303-Square

PART NUMBER:

DESCRIPTION: Stainless Steel stationary double hook

SM308

PART NUMBER:

DESCRIPTION: Stainless Steel swing / adjustable triple hook

SM307

PART NUMBER:

DESCRIPTION: 6 hook stainless steelCoat hanger, including mounting plate and adapter

AC138

42

PART NUMBER:

DESCRIPTION: 3 clip hanger with mounting kit

NOTES:

SM401-3

PART NUMBER:DESCRIPTION: 6 clip hanger

with mounting kitNOTES:

SM401-6

PART NUMBER:

DESCRIPTION: Document holder with mounting kit

NOTES:

SM406

Metal clips on anti-microbial (AMF) powder coat painted back-plate

2.5”H x 22”W x 1”D

Metal clips on anti-microbial (AMF) powder coat painted back-plate

2.5”H x 9.75”W x 1”D

Friction fit paper display rail. Release document by lifting bottom of sheet up towards ceiling.

1.5”H x 13”W x 1/2”D

43

Shelves and Work Surfaces


44

PART NUMBER:

DESCRIPTION: Fixed shelf with lip edges

NOTES:

S201 10”W x 8”DS203 14.5”W x 13.5”D

Metal with anti-microbial (AMF) powder coat painted finish

Includes 0.75” lip on 3 sides

PART NUMBER:

DESCRIPTION: Stainless Steel vented shelf

NOTES:

S205

31”W X 10”D

PART NUMBER:DESCRIPTION: Fold down shelf, mediumNOTES:

S216

Non-anti-microbial molded plastic with pencil edge groove to contain spills14.75”W / 15.5”W (outside bracket to outside bracket) x 10”D

PART NUMBER:

DESCRIPTION:NOTES:

S220Fold down tray, large

Molded plastic with embedded anti-microbial compound

24”W / 18”D (outside mounting bracket to outside mounting bracket). Takes 24.5” of rail space.

Pre-fabricated to include hardware and rail mounting adapters.

Complete as shown. Weight limit 25 lbs.

45

PART NUMBER:

DESCRIPTION: Herman Miller C-Frame rail mounting kit

NOTES:

CF201

For quick and stable mounting of C-Frame to the “Evolution” Fairfield-style rail and to the Paladin “M.T.S” Mobile Treatment Station

C-Frame unit sold separately

C-Frame unit customizable

PART NUMBER:DESCRIPTION: Herman Miller C-Frame

side rail kit

NOTES:

CF101

Add equipment rail to Herman Miler C-Frame for easy mounting of accessories to side of C-Frame unit.

Two rails included.

C-Frame unit sold separately

46

Monitor Mounting and Cable Management Tools

Smart SolutionsWorkspace Flexibility

47

PART NUMBER:

DESCRIPTION: GCX101-25-2 Channel to span (2) rails at 13-22” between railsGXC101-31-2 channel to span (2) rails at 20-28” between railsAdditional lengths available

NOTES:

GCX101-25-2 (25”H x 4”W)GCX101-31-2 (31”H x 4”W)Additional custom lengths available

PART NUMBER:

DESCRIPTION: GCX channel to span (3) rails at 20-28” between rails

NOTES:

GCX101-49-3 (49”H x 4”W)Additional custom lengths available

To mount a variety of equipment such as computer arms and equipment or swing-arm IV pole. Includes (3) pre-installed adapters.

To mount a variety of equipment, arms, and management tools. Includes (2) pre-installed adapters.

GCX149 (4”H x 4”W)

Rail Mount Kit for GCX style Swing Arms

Integrates the GCX channel to a single equipment rail. GCX hardware factory attached to rail mounting adapter.

Does not include patient monitor.Does not include swing arm (PR-GCX-FLP-0009-02)

PART NUMBER:

DESCRIPTION:

NOTES:

48

PART NUMBER:

DESCRIPTION: Articulating /Tilting VESA Mount Arm

NOTES:

DEM163-PM-FAIR

75/100mm with rail mount kit

Does not include monitor

PART NUMBER: AC126-1 (Single)AC126-2 (Double)AC126-3 (Triple)AC126-4 (Quadruple)AC126-5 (Quintuple)AC126-6 (Sextuple)

DESCRIPTION: Cord Caddy - Cord, Hose Storage and retrieval system

49

PART NUMBER:

DESCRIPTION: The “Hold Everything” mounting kit for I-Pads/Tablets/Phones…

NOTES:

AC109-P

User adjustable width to accommodate most mobile devices, computer accessories, hand-held controllers

Includes one pair of brackets (left and right) with factory attached adapters

PART NUMBER:

DESCRIPTION: Holder - Pillow Speaker/Nurse Call (Curbell Medical Style) / Patient Angled Phone Handset (Med-Pat), Rail Mount Kit Only, for Owner Provided Product

NOTES:

AC125-P

shown with SM304 cord bundler (sold separately)

50

PART NUMBER:

DESCRIPTION: Cord bundler with adapter

NOTES:

SM304-PM

PART NUMBER:

DESCRIPTION: Cable/Gas Hose Management Adapter

NOTES:

SM311

PART NUMBER:

DESCRIPTION: Cord cleat incl. Rail Mount Kit

NOTES:

SM306

Accommodates cables and gas hoses for secure and orderly management

Powder coat anti-microbial finish (AMF)

Slide action loop and clip to secure cords, cables, and wires, or to hold stethoscope.

3.5”H x 1.5”W x 0.75”D

Easy management of cables and cords

51

Vacuum and Medical Gas

52

PART NUMBER:

DESCRIPTION:

Duplex Med-Gas Block With 2x DISS Outlets

GBO101 (Oxygen)GBA101 (Air)GBV101-PM (Vacuum)

PART NUMBER:

DESCRIPTION:

Med-Gas Block with 2x 1/8 NPT Outlet

NOTES:

PART NUMBER:

DESCRIPTION: Oxygen Duplex Block with 2 OHIO Female front outlets and DISS inlet

NOTES:

NOTES:

Available with Ohio, Chemetronand 1/8” NPT fittings.

Flow meters and Vacuum regulator not included.

Available with Ohio, Chemetronand 1/8” NPT fittings.Flow meters and Vacuum regulator not included.

GBO102 (Oxygen)GBA102 (Air)GBV102 (Vacuum)


Oxygen Block with anti-microbial powder coat finish

53

PART NUMBER:

DESCRIPTION:

Blender slide, universalfor any brand of blender


PART NUMBER:

DESCRIPTION: Med-Gas Block with 2x 1/8 DISS Outletand 90 degree center outlet

NOTES:

PART NUMBER:

DESCRIPTION:

Duplex Med-Gas Block with 1x NPT and 1x Female Quick Connect Outlet

NOTES:

NOTES:

Bracket slide with anti-microbial powder coat finish

Blender, flow meters and Vacuum regulator not included.

Flow meters and Vacuum regulator not included.

AC104


Available with Ohio, Chemetron, Oxyquip and Schraeder fittings

54

PART NUMBER:

DESCRIPTION: Rail Mount Kit for Vacuum bottle slide, Anti-microbial ABS with anti microbial adapter

NOTES:

AC101-ABS

Does not include vacuum bottle

PART NUMBER:

DESCRIPTION: Oxygen cylinder mount for D or E tank cylinders

NOTES:

HTO101-P

Includes wire metal holder and pre-installed rail mount adapterDoes not include cylinder

PART NUMBER:

DESCRIPTION:

AC136

Rail mount kit for Battery operated suction device

NOTES: Includes pre-installed rail mount adapterDoes not include suction device

PART NUMBER:

DESCRIPTION:

NOTES:

VM201

Double ventilator manifoldwith DISS outlets:2 Air and 2 Oxygen

Integrated blender mount is standard.Blender is not included.Includes pre-installed rail mount adapters.Available with OHIO, Chemetron, Quick Connect or Puritan Bennet Type Fittings

55

PART NUMBER:

DESCRIPTION:

FERNO Mini Manager Compact Gasblockwith multiple Gasflowregulators (5)

NOTES:

GBO116PART NUMBER:

DESCRIPTION:

FERNO Micro Manager5 way DISS Oxygen Gas Block

NOTES:

GBO114PART NUMBER:

DESCRIPTION:

FERNO Multi ManagerGasblock with multiple Gasflow Regulators (8)

GBO115

NOTES:

Primarily use for Mass Casualty, Carts andFree Standing Tripod



56

IV, Lighting and other

PART NUMBER:

DESCRIPTION: IV swing-arm holder with 4-hook IV bag hanger

NOTES:

IM301

Infusion pump mounting swing arm for attachment of infusion pump and other pole-mount devices

Includes adjustable telescoping IV pole with 4 bag hanger

Does not include GCX channel

PART NUMBER:

DESCRIPTION: IV Pole Rail Solution, Dual Rail Mount Kit,4” offset from rail,Consists of 2x rail mount IV pole holder and 1 IV pole,(36” x 20” Pole, 3 Hooks)

IM200-4-3L

57

PART NUMBER:

DESCRIPTION: Universal mount for any device with a C-clamp pole mount

IM401-P-3-4

58

NOTES: 1”Dia. x 4”H aluminum pole on 5”D anti-microbial (AMF) powder-coat painted post

Pre-fabricated to include hardware and rail mounting adapter. Complete as shown.

Available with custom stand-off depth (greater or fewer than 5”) as defined by customer.

PART NUMBER:

DESCRIPTION: Post mount for Owner provided Waldmann light (shown) or IV pole

NOTES:

LM201

Anti-microbial powder coat painted finish (AMF) machined metal post with integrated Allen screw to secure light post or IV pole into post-hole

Includes pre-installed rail mount adapter

Available complete with Waldmann light for turn-key installation.

59

Miscellaneous Accessories

60

PART NUMBER:

DESCRIPTION: Medical Chart HolderVertical

NOTES:

AC173-4-PM-HIPAA (4 slot)AC173-3-PM-HIPAA (3 slot)AC173-2-PM-HIPAA (2 slot)

Acrylic, Opaque Front Face, HIPAA compatible, with adapter mount kit

PART NUMBER:

DESCRIPTION: Medical Chart HolderHorizontal

NOTES:

AC174-4-PM (4 slot) HIPAAAC174-3-PM (3 slot) HIPAAAC174-2-PM (2 slot) HIPAA

Available in clear front,or HIPAA

AC173-4-PM (4 slot)AC173-3-PM (3 slot)AC173-2-PM (2 slot)

Chart Holder Clear Front / Magazine Rack, Vertical

PART NUMBER:

DESCRIPTION:

NOTES: Acrylic with adapter mount kit

61

PART NUMBER:

DESCRIPTION: Low Cost Heavy Duty Acrylic Marker Board

AC159-17.1x14.2 (17.1”W x 14.2”L x 2”D)AC159-8.5x14.2 (8.5”W x 14.2”L x 2”D)

Available in 2 sizes.Insert is not included

NOTES:

AC149-14.75x12 (14.75”W x 12”L x 2”D)AC149-16x26 (16”W x 26”L x 2”D)AC149-17.75x15 (17.75”W x 15”L x 2”D)

PART NUMBER:

DESCRIPTION:

NOTES:

Vu Ease Patient Information Board

The Information Boards are built with high-quality tempered glass, and include a limited lifetime warranty.

PART NUMBER:

DESCRIPTION:

AC148-PM (17.75”W x 13.5”L)

Contemporary Style Mirror with rail mount kit

PART NUMBER:

DESCRIPTION: Rail mount kit for 12 Qt. small vanity waste basket (Rubbermaid)

AC106-PM

62

NOTES: Waste basket available in white or beige


DESCRIPTION: Rail Mount Kit for TIDI PPE Cabinet

SM210-PM (8-3/4W x 7-1/4H x 6D)

Dual lock, Single Door Narcotic Box

Rail mount kit and Double Lock Narcotic Box,20-gauge steel. Beige.

PART NUMBER:

DESCRIPTION:

NOTES:

IC319-PPART NUMBER:

DESCRIPTION:

NOTES:

Rail mount kit for Emesis Bag Dispenser

Bags and dispenser are not included

PART NUMBER:

DESCRIPTION: Catheter container mount

SM206-PM (6”W x 4”D x 18”L)

63

NOTES: Includes catheter container with 2 internal dividers and pre-installed adapter mount.

PART NUMBER:

DESCRIPTION: CareFusion Razor mount for Owner provided razor

A112-P

PART NUMBER:

DESCRIPTION:

NOTES:

DEM157-PM (4 3/4”H x 5 3/8” Dia)DEM160-PM (4 3/4”H x 7 1/8” Dia)

Cup for pens, pencils, tongue depressors, etc.

white, powder coated

64

FERNO

DESCRIPTION: Small FERNO Bag

65

NOTES: Available in 3 different colors: Red, white and blue

DESCRIPTION:

NOTES:

Large Wall MountedFERNO Wall Cabinet

PART NUMBER: PR-FN-506


Large FERNO Bag

PART NUMBER:

DESCRIPTION:

NOTES:

PR-FN-507

Available in 3 different colors: Red, white and blue

Available in 3 different colors: Red, white and blue

Available sizes:24”, 36” and 48” width

DESCRIPTION: Large Vertical Inventory Supply Pouch

66

NOTES: 10”H x 8”W x 2.5”D

DESCRIPTION:

4.5”H x 8”W x 2.5”D

NOTES:

Small Inventory Supply Pouch



Large Horizontal Inventory Supply Pouch

4.5”H x 16”W x 2.5”D

PART NUMBER:

DESCRIPTION:

NOTES:

PR-FN-502

PART NUMBER:

DESCRIPTION:

NOTES:

PR-FN-505

Double Micro Inventory Supply Pouch

4.5”H x 4”W x 2.5”D

DESCRIPTION: Mounting Plate for FERNO Inventory Pouches

67

NOTES: This plate is for every size of FERNO Bag

DESCRIPTION:

NOTES:

PART NUMBER: SM502-P

PART NUMBER: SM501-P

Holder Plate for FERNO Bags

Plate is for small andlarge FERNO Bags

68

Mobile Treatment and Transport Systems

PART NUMBER:

DESCRIPTION: METS 1: Mobile Equipment Transportation System

IM601

69

NOTES: Bed mountable equipment transport solution to facilitate patient monitoring and infection control right at the bed during patient transportation or for temporary hallway use.

PART NUMBER:

DESCRIPTION: METS 2: Mobile Equipment Transportation System

IM501

70

NOTES: • Patient transport cart which docks to a patient bed or stretcher to manage and organize equipment during patient transport

• Includes (2) infusion poles and (5) EVOLUTION equipment rails• Supports medical delivery, patient monitoring, supply, and infection

control tools• Stable weighted base that is powder-coated in an anti-microbial finish• Heavy-duty rubberized non-skid casters, 2 of which are lockable• (20) Linear Feet of usable equipment rail space for custom location of all

accessories based on immediate need• Adjustable transport docking device will adapt to uneven surfaces or

emergency Trendelenburg positioning

71

PART NUMBER:

DESCRIPTION:

NOTES:

MC102

Mass Casualty Rapid Deployment Equipment Management System

Portable and easily stored Equipment Management System for rapid deployment in any situation. Application on rough terrain is accommodated through use of heavy duty Tri-Pod Stand which will “self level”.

• Includes (2) tri-pods with (2) carrying cases (2) 4ft rails with rail joiner in canvas pouch

• Sturdy and stable• Pre-Hospital or In-Hospital• Perfect for MCI Tent Applications• Can be stored in a closet, MCI Trailer or heavy rescue type vehicle• Delivers Med Gas, mounts PPE and monitoring devices on rail and

off the floor• Complete Integration with FERNO Intraxx components

PART NUMBER:

DESCRIPTION: F.T.S. Flexible Treatment Station

MC101

73

NOTES: • Manage all clinical and support equipment in forward triage or hallway overflow conditions

• Use as a flu screening cart in the ED waiting areas to alleviate throughput• Able to supply locking drawers and a variety of work surfaces and file

organizers for admission forms, etc. • Stable weighted base that is powder-coated in an anti-microbial finish• Heavy-duty rubberized non-skid casters, 2 of which are lockable• (20) Linear Feet of usable equipment rail space for custom location of all

accessories based on immediate need• Adjustable transport docking device will adapt to uneven surfaces or

emergency Trendelenburg positioning• Includes (2) infusion poles and (5) EVOLUTION equipment rails

74

Medical Gas Headwall Systems

PART NUMBER:

DESCRIPTION: REVOLUTION Horizontal Headwall Unit

HWH-006 / HWH-008 / HWH-009

75

NOTES: • Available in 6’, 8’, and 9’ lengths, or customized to project specs• Customizable Gas and Electrical outlet type and placement• (2) layers of integrated “Evolution” Fairfield-style equipment rail• Single-point connection feed manifold• Option for integrated lighting, up and/or down• Optional RAL paint finishes available for face panels• Any color Wilsonart laminate inlay standard for rails. Alternate

manufacturers available.• Fully integrates with Marlite wall protection system

PART NUMBER:

DESCRIPTION: HALO Vertical Headwall Unit

HWV-HALO (different models available)

76

NOTES: • Vertical headwall unit that can be used alone as a headboard for a single bed or for use with two beds

• Ergonomic gas and electrical services to promote clinical excellence• Single-point connection manifold. Only 3 brazing connections.• Customizable width and services placement available• Standard bundled solution includes (6) 72” “Evolution” equipment rails• Any color Wilsonart laminate inlay standard for rails. Alternate

manufacturers available.• Face panel customizable in Marlite FRP finishes• Fully integrates with Marlite wall protection system

77

Equipment Management

78

Managing Very Tight Spaces

79

Process and Inventory Management Transformation

“By implementing the Paladin rail system, we have improved the ease of workflow and delivery of care and have dramatically reduced our inventory costs.”

- ER Supply Coordinator

AFTER

BEFORE

80

Lean Inventory Control

81

Infection Control

82

Terminal Cleaning

The Paladin Equipment Rail SystemFor a “True” Terminal Clean, all equipment and technology may be removed from a patient room in a matter of minutes



IF YOU NEED IT – WE CAN DO IT!

www.paladinhc.com

Emergency Department

ICU

Patient Room

NICU

Physician / Clinic Exam Room

Pre and Post Op

Scrub Sinks

General Infection Control

Operating Rooms

Ambulatory Care

Mass Casualty / Surge Population Management

Forward Triage Cart

new catalog januar 2019 - paladin healthcare llc · sm101-pm notes: plastic coated wire u-shaped...

Documents