new bestconnguide lo6sdtv eng 31july p1€¦ · new_bestconnguide_lo6sdtv_eng_31page 1 2006-07-31...
TRANSCRIPT
![Page 1: New BestConnGuide LO6SDTV Eng 31July p1€¦ · New_BestConnGuide_LO6SDTV_Eng_31Page 1 2006-07-31 11:17:39 AM. 2 Connecting Input Device to TV (eg. DVD player, Digital Recorder, VCR,](https://reader033.vdocuments.site/reader033/viewer/2022042306/5ed1d562854a7d7100360e46/html5/thumbnails/1.jpg)
Component Video Input (CVI) Provides superior picture quality by separating the green, blue and red luminance signals. Typically used with red/white audio cables.
Better Good Basic
RF Provides a basic connection for antenna or cable. Provides both audio and video.
Connection Basics
Note
Basic
Composite Audio/Video Separate video (yellow) and audio (red/white) cables that provide a basic connection from the set-top box and other devices.
: The color of audio inputs may differ, e.g. red/white or red/black.
S-Video Supplies a better picture than RF and Composite connections. Used with red/white audio cables.
1 Connecting Set-Top Box to TV
Other Possible Connections
ComponentVideoRefer to panel 2.
3 Connecting Hi-� System or External Speakers to TV oHow t
make the best connectionUse this guide to achie ve the optimal connection for each of your components .TV can support these different types of cable connection. Please check your
RF Cable
C
2005 © Koninklij ke Philips Electronics N.V. All rights reserved.
3139 125 35352
n
TV.
: Need more help?User manual:Check the user ma ual that came with your
Online help www.p4c.philips.com orwww.usasupport.philips.com
Back of Set-Top Box
Cable Signal IN from Cable Company
TOTV/VCR
CABLEIN
IR
USB
DVD-D OUT
AUDIO IN SPDIFVIDEO
IN OUT
S-VIDEOR L
AUDIO OUT
TVPASSCARD
Y Pb Pr
OPTICALSPDIF
TV75 Input
75
A
B
-
C
M
Y
CM
MY
CY
CMY
K
HUG_30PW9110D.pdf 2005-06-30 11:00:00 AM
C Set the out channel of theset-top box to CH 3 or 4if available. Press the A/D button on theremote control to set theTV to analog mode.
A Connect RF cable from wall to input at the back of the set-top box.
Use second RF cable to connect the set-top box to the TV input (75 ).
B
Note: This connection gives mono sound. For stereo sound use also composite audio/video connection (Refer to panel 2).
Monitor out
BasicRFProvides a basic connection for antenna or cable. Provides both audio and video.
device to see which one applies.
A
B
Connect audio cable from the SPDIF jack on the rear of the TV to the DIGITAL IN jack on the rear of the hi-fi system or external speakers.
SPDIF (Sony and Philips Digital Interconnect Format)is highly recommended for high quality digital surround sound output.
Better
OR
S-VIDEO
AV1 in
Y
Pb
Pr
AV2 in
AUDIO
R
L/Mono
VIDEO
COMPONENT VIDEO INPUT
Monitor out
TV Jack Panel
TV
IN
Connect red/while audio cables from the TV monitor output jacks to the rear of hi-fi system or external speakers.
B
A
Audio Out SPDIF
Set the TV to the same channel as the set-top boxoutput channel.Change the channels at the set-top box to view the program.
D
C
M
Y
CM
MY
CY
CMY
K
New_BestConnGuide_LO6SDTV_Eng_31Page 1 2006-07-31 11:17:39 AM
![Page 2: New BestConnGuide LO6SDTV Eng 31July p1€¦ · New_BestConnGuide_LO6SDTV_Eng_31Page 1 2006-07-31 11:17:39 AM. 2 Connecting Input Device to TV (eg. DVD player, Digital Recorder, VCR,](https://reader033.vdocuments.site/reader033/viewer/2022042306/5ed1d562854a7d7100360e46/html5/thumbnails/2.jpg)
2 Connecting Input Device to TV (eg. DVD player, Digital Recorder, VCR, Video Camera, Games Console)
OR
Component Video Input
A Insert Component Video connectors into their corresponding jacks on both DVD player/DVD recorder and TV (sometimes labeled Y, Pb and Pr).
Connect red/white audio cables to the audio output jacks on DVD player/DVD recorder and audio AV inputs on TV.
B
Turn on TV and DVD player/DVD recorder. Press the AV button on the remote control until CVI appears on TV screen.
C Insert a pre-recorded DVD into DVD player/ DVD recorder and press PLAY to verify correct connection.
D
AV1 in AV2 in
R
VIDEO
COMPONENT VIDEO INPUT
TV
Back of DVD Player/Recorder
AV Buttons Remote Control
TV Jack Panel
S-VIDEO
OUT OUT OUT
L
R
AUDIOVIDEOCOMP VIDEO
Y Pb
Pr
A B
C
Note: When using CVI, it is best not to connect a video signal to the other AV input on the TV.
Monitor out
Monitor out
L/Mono
Component Video Input (CVI) Provides superior picture quality by separating the green, blue and red luminance signals. Typically used with red/while audio cables.
Better S-Video
Connect audio cables (red/white) to audio AV inputs on back of TV and Audio outputs on back of VCR.
B
Insert pre-recorded videotape into VCR and press PLAY to verify correct connection.
D C Turn on TV and VCR. Press the AV button on the remote control until S-Video appears on TV screen.
TV Jack Panel
Back of VCR
AV Button
B
TV
S-VIDEO
AV1 in
Y
Pb
Pr
AV2 in
AUDIO
R
L/Mono
VIDEO
COMPONENT VIDEO INPUT
AUDIO OUTL R S-VIDEO
OUTANT/CABLE
OUT
VIDEOOUT
A
CH+ and CH- Buttons
Remote Control
C
A Connect S-Video cable to S-Video input on back of TV and S-Video output on back of VCR.
Note: When you connect S-Video and AV2 at the same time,
Monitor out
Monitor outGood
S-Video Supplies a better picture than RF and Composite connections. Used with red/white audio cables.
you can only hear sound coming from S-Video. S-Video will dominate over the Video of AV2.
Composite Audio/Video
Connect the video cable (yellow) to the VIDEO AV input on back of TV and the corresponding video output on back of VCR.
A Connect audio cables (red/white) to audio AV inputs on back of TV and the corresponding audio outputs (L & R) on back of VCR.
B
Turn on the TV and VCR. Press the AV button on the remote control until AV1 or AV2 appears on TV screen.
C Insert pre-recorded videotape into VCR and press PLAY to verify correct connection.
D
TV
TV Jack Panel
Back of VCR B
S-VIDEO
AV1 in AV2 in
AUDIO
R
L/Mono
VIDEO
COMPONENT VIDEO INPUT
AUDIO OUTR L S-VIDEO
OUTANT/CABLE
OUTVIDEOOUT
AV Button Remote Control
C
A
Monitor out
Monitor out
Basic Composite Audio/Video
Separate video (yellow) and audio (red/white) cables that provide a basic connection from the set-top box and other devices.
: The color of audio inputs may differ, e.g. red/white or red/black.
Note
Composite Audio/Video TV Side Jack Panel
VIDEO
AUDIO
L
R
S-VIDEOVIDEO AUDIO
LEFT RIGHT
AV Button Remote Cont r ol
Video Camera
TV
Video Camera Jack Panel
A
B
C
D B
C A
Note: for mono devices, connect only white audio cable from output to white audio input on the side of TV. device’s audio
OR OR
OR
Basic Composite Audio/Video
Separate video (yellow) and audio (red/white) cables that provide a basic connection from the set-top box and other devices.
: The color of audio inputs may differ, e.g. red/white or red/black.
Note
Connect the video cable (yellow) from the video output on camera (or other device) to the video input (yellow) located on the side of TV.
Connect audio cables (red/white) from audio outputs on device to audio inputs (red/white) on the side of TV.
Press PLAY on the device to verify connection
Turn on TV and the device. Press the AV button on the remote control until FRONT / SIDE appears on TV screen.
TV Side Jack Panel
AUTOPICTURE
AUTOSOUND A/D
FORMAT CLOCK SLEEP GUIDE
AV SAP CC INFO
1 2 3
4 5 6
7 8 9
0
VOL CH
MENU OK
MUTE
AUTOPICTURE
AUTOSOUND A/D
FORMAT CLOCK SLEEP GUIDE
POWER
AV SAP
A/CH
CC INFO
AUTOPICTURE
AUTOSOUND A/D
FORMAT CLOCK SLEEP GUIDE
AV SAP CC INFO
AUTOPICTURE
AUTOSOUND A/D
FORMAT CLOCK SLEEP GUIDE
AV SAP CC INFO
1 2 3
4 5 6
7 8 9
0
VOL CH
MENU OK
MUTE
AUTOPICTURE
AUTOSOUND A/D
FORMAT CLOCK SLEEP GUIDE
POWER
AV SAP
A/CH
CC INFO
1 2 3
4 5 6
7 8 9
0
VOL CH
MENU OK
MUTE
AUTOPICTURE
AUTOSOUND A/D
FORMAT CLOCK SLEEP GUIDE
POWER
AV SAP
A/CH
CC INFO
1 2 3
4 5 6
7 8 9
0
VOL CH
MENU OK
MUTE
AUTOPICTURE
AUTOSOUND A/D
FORMAT CLOCK SLEEP GUIDE
POWER
AV SAP
A/CH
CC INFO
AUTOPICTURE
AUTOSOUND A/D
FORMAT CLOCK SLEEP GUIDE
AV SAP CC INFO
C
M
Y
CM
MY
CY
CMY
K
New_BestConnGuide_LO6SDTV_Eng_31Page 1 2006-07-31 11:24:01 AM