NETWORK MANUAL

TOUCH TOYENGLISH

NETWORK SYSTEM - Touch Toy

1 Menu Network 5

2 Net Status 5 2.1 Networking options 5

2.2 Touch Toy Registration 6

2.2.1 Choose connection 6

2.2.2 Internet conection with modem (analogue / ISDN) 6

2.2.3 Internet connection with ADSL (DSL) 7

2.2.4 Internet connection with LAN 8

2.2.5 Internet connection with WLAN 9

2.2.6 Internet connection with UMTS 10

2.2.7 Internet connection with GPRS 12

2.2.8 Connection test 12

2.3 Register Terminal 14

3 Transfer now 15

4 No network reset 15

5 Connection test 15

6 Log File(s) 15

7 Modem 16 7.1 Supported modems 16

7.2 Modem types 17

7.3 Modem describtions 18

7.3.1 Dynamode M56 USB 18

7.3.2 Webjet Pocket ISDN USB 18

7.7.3 Wavecom 1206 Fastrack GPRS 19

7.3.4 Nokia 30 GPRS 20

7.3.5 E220 HSDPA USB Modem 21

8 Glossar 22

1 Menu NetworkTo open the network menu, press red setup key (bookkeeping) and select menu „network“.

• NetStatus

• Transfernow

• Nonetwork/reset

• Log-File(s)

• ConnectionTest

2 Net statusSelect menu item „Net status“ to connect a Touch Toy terminal to the network.

2.1 Network options

FortheTouchToynetwork,aconnectiontoaninternetproviderisrequired(forexampleviamodemornet-

work card). A permanent data actualization will take place.

5

2.2 Touch Toy registration

To register a Touch Toy, only 2 steps are necessary:

• Step1-Chooseconnection

• Step2-Registerterminal

2.2.1 Choose connectionIt is important to configure the internet connection first, in order to be able to implement the Touch Toy regis-

trationdataafterwards.Todothis,selectmenuitem„Step1-Chooseconnection“toconfiguretheexisting

internet connection.

The following options are available:

• ADSL->InternetconnectionwithDSLModem(PPPoE,PPTP)

• LAN->Internetconnectionwithlocalnetwork(LAN,DHCPServer/Router)

• WLAN->Internetconnectionwithwirelesslocalnetwork(DHCPormanualIP-configuration

possible)

• UMTS->InternetconnectionwithUMTSmodem

2.2.2 Internet connection with modem (analogue/ISDN)1. Modem

Intheselectionfield„Modem“pressEdit-button-alistofallconnectedmodemsisdisplayed.

SelectconnectedmodemandpressOK-button

6

2. Number to get an outside line

Ifyouneedanumbertogetanoutsidelineenterthenumberhere(e.g.0).

ThereforepressEdit-buttonintheselectionfield„numbertogetanoutsideline“-enter

requirednumberandpressOK-button

3.Initstring(AT-command)

AT-commandsareaninstructioncodeforintelligentmodems

IntelligentmodemscanbeconfiguredorsteeredbyAT-commands

4. Touch Toy NET telephone number

Select dial in number to the internet provider

Intheselectionfield„TouchToyNETtelephonenumber“pressEditbutton-selectdialinnumber

fortheinternetproviderandpressOK-button

5.Transfersettings

Intheselectionfield„Transfersettings“,pressEdit-button

DefinethedailytimeperiodandhowofteneachdaythenetworkdataoftheTouchToyterminalshouldbe

updated.

e.g. Start time: 12:00

End time: 23:59

Numberoftransmissions:5

i.e.everydaybetween12:00and23:59thenetworkdataoftheTouchToyterminalwillbeupdatedfor5

times.Thegamemodewillnotbeinterruptedduringdatatransfer.Tosavesettingsandexitmenu,press

Store-button

6. Connection test

WiththeConnectiontestmethodit‘spossibletoverifythenetworkconnectionimmediately

2.2.3 Internet connection with ADSL (DSL)IftheADSLtypeofconnectionwasselected,thereisachoicebetweentwopossibilities:

• ADSLviaPPTP

• ADSLviaPPPoE

BasicinformationforTouchToyterminalsequippedwithanADSL-connection

ATTENTION: No USB ADSL modem / router is supported!

Touch Toy hardware only supports Ethernet modems/routers

(aconnectionofanADSLmodem/routerwith theTouchToynetworkadapterhas tobeprovidedbyan

Ethernet network cable).

IfnoDHCP-router isconnectedwith theADSLmodem, theADSLnetworksettingsmustbeconfigured

manually.7

BecarefulwhichtypeofADSL-accessisavailable.CurrentlyPPTPandPPPoEarethemostwidelyused

ADSL-transmissionprotocols.YoucangetfurtherinformationabouttheexistingADSLconnectionandthe

requiredADSLnetworkaddressesfromthenetworkadministratororyourADSL-provider.

ThefollowingADSL-networkaddressesarerequired:

• Terminal IP address -onlynecessarywithPPTP!(standardIP10.0.0.140)

• Router IP address-onlynecessarywithPPTP!(standardIP10.0.0.138)

• User name

• Password

• DNS 1 (primary)

• DNS 2 (secondary)

ForenteringtheconfigurationdatapresstheEditbutton,typeintheconfigurationdata,afterall

requireddataareenteredpressStore-Button

Example of a single-location system via ADSL-modem without router:

ThecablefromthetelephonesocketisconnectedeitherdirectlyorwithasplittertotheADSL-modem.

TheTouchToyterminalsnetworkcardisconnectedtotheADSL-modemviaanEthernetnetworkcable.

2.2.4 Internet connection with LANIftheLANtypeofconnectionwasselected,thereisachoicebetweentwopossibilities:

• Automatic network configuartion via DHCP

• Manual network configuartion

Automatic network configuration via DHCP:

IftheconnectednetworksupportsDHCP(DynamicHostConfigurationProtocol),allnetworksettingsare

8

automaticallyreceivedfromtheterminal.Itisnotnecessarytoconfigurethenetworksettingsmanually.

Inamulti-locationsystemarouter(DHCPconfigured)mightbeinstalledbetweentheADSL-modemandthe

terminals.ADHCP-routerautomaticallyconfiguresallADSLsettings.

Activation of „automatic network configuration via DHCP“:

1. Select „automatic network configuration via DHCP“ (field is marked in yellow)

2.Tosavesettingsandexitmenu,pressStore-Button

3.AllnetworksettingsareallocatedautomaticallyfromtheDHCP-router/Server

Exampleofamulti-locationsystemwithrouter(DHCPconfigured):

ThecablefromtheADSLmodemisconnectedwiththerouter‘s inputsocketandtheoutputsocketare

linked via Ethernet network cables with the Touch Toy terminals network adapter.

Manual network configuration

The network settings must be configured manually. The connected network does not support DHCP. The

followingnetworkaddressesarerequiredforamanualconfiguration(contactthenetworkadministratorif

necessary):

• TerminalIPadress

• SubnetMask

• DefaultGateway

• DNS1,DNS2

Activation of „Manual network configuration“:

1. Select „Manual network configuration“ (field is marked in yellow)

2.ForenteringtheconfigurationdatapresstheEditing-Button,typeintheconfigurationdata,afterall

requireddataisentered,pressStore-Button

2.2.5 Internet connection with LANWLAN adapter installation

ConnecttheWLANadaptertothebluecolouredUSBport(modem)ofthecomputerunit.Switchoffthe

terminal and switch it on again.

Settings for WLAN

• DHCPactivated(automaticIPconfiguration

• OpenSystem

• Supporteddataencryption:WEP64/128Bit,WPA,WPA2

WLAN settings in the network menu

1. Select the available WLAN USB adapter, which is connected to the Touch Toy computer unit

(„Available WLAN adapter“).

2. Select the according WLAN network which the Touch Toy terminal should use to access the internet

(„Available WLAN networks“).9

3. To protect the WLAN network against unauthorized users we recommend you to activate a data

encryption method.These data encryption methods are available: WPA, WPA2, WEP 64 bit or 128 bit

• EntertheWEPkeyinHEXorASCIIcharacters

• 64bit 128bit

• HEX:10characters HEX:26characters

• ASCII:5characters ASCII:13characters

UsablecharactersetforHEX:A-F,a-f,0-9

UsablecharactersetforASCII:0-9,A-Z,a-z,äüö/\?!-&%$“()=+#

ForenteringWEP-codepresstheEditing-Button,afterallsettingsareenteredpress

Store-Buttontosavesettingsandexitmenu.

Additional information in the WLAN configuration menu:

AdapterMACAddress-MACaddressoftheconnectedWANUSBadapter

(MACAddress=MediaAccessControladdress,ahardwareaddressthat

uniquely identifies each system in a network)

Networksignalstrength-SignalstrengthoftheselectedWLANnetwork

2.2.6 Internet connection with UMTSWithanUMTSModemyouhavethepossibilitytoconnectyourTouchToyTerminalevenifnophonejackis

immediatelyavailable.TheUMTSmodemworkswirelessandoperateswithaSIMcardofamobileinternet

provider.EachSIMcardwithactivatedUMTSfunctionisworking.Amonthlydatavolumeofapproximately

1024 MB is necessary. ATTENTION: The PIN query must be disabled at the SIM card.

UMTS-configuration settings:

Modem

In the selection field „Modem“ press Editing Button -allavailablemodemsaredisplayed.Select

connectedmodemandpresstheOK-Button.

Number

Intheselectionfield„Number“pressEditing-Button

TypeintheGPRS-providerspecificdial-innumberandpressOK-Button

Thedial-innumber*99***1# ispredefinedbythesettings-menuandworkswithallknownmobilephone

providers.

Username

Intheselectionfield„Username“pressEditing-Button .

TypeintheGPRS-providerspecificUsernameandpressOK-Button10

Password

Intheselectionfield„Number“pressEditing-Button

TypeintheGPRS-providerspecificpasswordandpressOK-Button

DNS 1

Intheselectionfield„DNS1“pressEditing-Button

TypeintheIPaddressoftheprimaryDNSserver(DNS1)andpressOK-Button

DNS 2

In the selection field „DNS 2“ press Editing Button

TypeintheIPaddressofthesecondaryDNSserver(DNS2)andpressOK-Button

Initstring

AspecialinitstringisrequiredtoconnectthemodemviaUMTS-mode.

The initstring is made up the following way:

WiththeexceptionofUMTS-provider‘sAPN(AccessPointName),theinitstringalwaysremains

thesameforallproviders.Thefirstpartalwaysremainsunchanged,onlytheAPN(secondpart)

adapts to the local provider.

Examples for an Initstring (date 2008):

ONE(mobiletelephoneproviderAustria):at+cgdcont=1,“IP“,“fullspeed“

T-Mobile(mobiletelephoneproviderGermany):at+cgdcont=1,“IP“,“web.vodafone.de“

The mobile phone provider, who has equipped you with the SIM card, provides you with the

requiredUMTS-settings.

ToenterthenecessaryinitstringpresstheEditing-Button , type in the initstring and press

OK-Button.

Transfersettings:

Intheselectionfield„Transfersettings“pressEditing-Button

Definethedailytimeperiodwhentheterminal‘sdatashouldupdateandhowoftenthedatashouldupdate

each day.

Youcanchangethevalueswiththecursorkeys„+“and„-“.

Tosavesettingsandexitmenu,pressStore-Button

11

•

2.2.7 Internet connection with GPRSTheconfigurationoftheconnectionisexactlythesameasUMTS(see2.2.6InternetconnectionwithUMTS).

However,internetprovidersusedifferentinistringsforGPRSconfiguration.Themobilephoneprovider,who

has equipped you with the SIM card, provides you with the required GPRS settings.

2.2.8 Connection TestAftertheinternetconnectiongetsdefined,thepossibilityexiststoimmediatelytesttheconfiguredinternet

connectionifasuccessfulconnectiontotheinternetcanbeestablished.

Thereforepressthe„Connectiontest“button.

Pressthe„connect“buttontotesttheconfiguredinternetconnection(dependingonthequalityofthecon-12

nection,itcantakeuptooneminute).Theactualstatusoftheexistinginternetconnectionisdisplayedin

the field „Connection status“:

• notconnected-Noconnectiontotheinternetestablished

• connecting-Tryingtoestablishaconnectiontotheinternet

• connected-Sucessfullyconnectedtotheinternet

If a successful connection to the internet is established, it ispossible to start thePING-test to test the

connection.ThePING-testsendsdatapacketstoacertain IPaddressandreceivespacketsagain from

thisselectedIPaddress.Consequentlyyoucannoticeifdatapacketscangetsendandreceivedfromthe

internet.

• rootdns-connectiontesttoMain-DNS-server

• google-connectiontesttowebsitewww.google.com

• funworld-connectiontesttowebsitefunworld.operationnetwork.org

Example:

SelectButton[google]-connectingwebsitewww.google.com(IPAddress216.239.59.147)andtrytoex-

change data packets.

ping www.google.com...

Pingingwww.I.google.com[216.239.59.147]with32bytesofdata:

Replyfrom216.239.59.147:bytes=32time=66msTTL=243

Replyfrom216.239.59.147:bytes=32time=105msTTL=243

Replyfrom216.239.59.147:bytes=32time=69msTTL=243

Replyfrom216.239.59.147:bytes=32time=74msTTL=243

Pingstatisticsfor216.239.59.147:

Packets:Sent=4,Received=4,Lost=0(0%loss),

Approximateroundtriptimesinmilli-seconds:

Minimum=66ms,Maximum=105ms,Average=78ms

In the menu item „Ping statistics“ you can see if the PING-test was successfully.

Packets:Sent=4,Received=4,Lost=0(0%loss)

i.e.

>>>Sent=4

4Packets(32bytes)weresentsuccessfullytoIPAddress216.239.59.147(www.google.com)

>>>Received=4

4Packets(32bytes)werereceivedsuccessfullyfromIPAddress216.239.59.147(www.google.com)

>>>Lost=0(0%loss)

0Packetsarelost(0%loss)

If the PING-test could not get executed, check the configured network settings.

13

2.3 Register terminal

Afterhavingconfiguredthe internetconnection,selectmenu item„Register terminal“ toenterTouchToy

registration data.

Press the Button „Register terminal“, type in your personally User name and password and press the ENTER

button. To get your personal licence number, contact your regional Touch Toy distributor.

Example:

User name: password:

DE365MAYR109XYZ FUN5621

TheTouchToyisconnectingtotheserverandthevalidityoftheenteredUsernameandpasswordwillget

verified.Thenanothermenuwillgetdisplayed,enterthelocationdataandpressStore-Button

All location data ever registered under the same User name are deposited on the server.

IfaTouchToyterminalwillgetregisteredonanalreadyregisteredlocation,itisnotnecessarytoenterthe

locationdataagain;aselectionlistofalldepositedlocationdatagetsdisplayed.

SelectwantedlocationandpressStore-Button

TheregistrationoftheTouchToyterminalisfinished.

Exitthemenu„Netstatus“,andpressStore-Button

14

3 Transfer nowThefirstdatatransmissioncangetstartedafterhavingenteredallregistrationandconnectionsettings.As

soonasthefirstdatatransmissionhasbeencompletedsuccessfully,theautomaticdatatransferisactiva-

ted.

4 No network / resetAll network settings and registration data are deleted. However the Touch Toy terminal can get registered

again any time.

5 Connection testIs a firewall installed in the local network, there is the possibility that some ports are blocked, and several

TouchToyonlineapplicationswillnotwork.Insuchcasepleaseusetheconnectiontestmethodtoverify

theavailabilityofnecessaryports.

Following ports will be checked:

TCP: 80, 443, 2352, 5050, 5190

UDP: 2351, 2352, 2353, 2362, 2363, 6789

Startconnectiontestprocedureandcheckwhetherallfunctionaltestsweresuccessful.

Ifnecessarycontactthenetworkadministratorforthefirewallsettings.

6 Log-File(s)AlldatatransfersarerecordedintheTouchToysoftware.

InthemenuLog-File(s)allrecordeddatatransfersareaccountedfor.

• ModemLog-Accountofmodemdiagnosticdata

• TransferLog-Accountofalldatatransfers

• UpdateLog-Accountofallreceivedonlineupdates

15

7 Modem

7.1 Supported Modems

16

7.2 Modem Types

analogue modem

Type: Dynamode (Neolec) Freeway 56 USB TT designation: SmartUSB56 Voice Modem

ISDN modem

Type: Webjet Pocket USB TT designation: (ISDN) remote network access

GPRS modem

Type: Wavecom 1206 Fastrack GPRS TT designation: wavecom GPRS

Type: Nokia 30 GPRS TT designation: Nokia 30

UMTS modem

Type: E220 HSDPA USB Modem TT designation: HUAWEI UMTS Modem

17

7.3 Modem Description

7.3.1 Dynamode M56 USB

7.3.2 Webjet Pocket ISDN USB(ISDN remote network access)

ThecaseofWebjetPockethastwosignallightswhichprovideconstantinformationaboutthestatusofthe

adapter and the ISDN line.

*ThestatusofthemodemwastakenaftertheTouchToysoftwarewascompletestarted-up.

18

7.3.3 Wavecom 1206 Fastrack GPRS

Dual band EGSM900/1800 MHz

accessories:

• serial-/USB-adapter

• antennalead,incl.antenna

SinceallmodemsconnectedtothenewpowerboxXtremecommunicateviaUSBinterface,aserial-/USB-

adapterforthemodemWavecom1206GPRSFastrackisneeded.

19

7.3.4 Nokia 30 GPRS

EGSM 900/GSM 1800 network

ThemodemNokia30consitsoftwoparts:

• modem

• RS232adapterforthemodem

TheNokia30hasaninternalantennabut ifthesignalstrengthis insufficientforotpimaluse,anexternal

antenna can be attached to the modem.

accessories:

• serial-/USBadapter

• antennaleadincl.antenna

SinceallmodemsconnectedtothenewpowerboxPROcomunicateviaUSBinterface,aserial-/USB

adapterforthemodemWavecom1206GPRSFastrackisneeded.

Insert the SIM card

Nokia 30 light indicators:

20

7.3.5 E220 HSDPA USB Modem

21

8 Glossar

DSL:

„Digital Subscriber Line“

DSLisatelecommunicationtechnologythatprovidesafast,permanentconnectiontotheInternetbyusing

thetwo-wirecoppercablefoundinalmosteveryhomeandoffice.

Eitherthesamerangeisavailableforthetransmissionineachdirection,orhowever-thatisthemore

oftenthecase-thechannelforreceivingdata(Downstream)ismoreefficientthanforsendingdata

(Upstream).ThereareseveraltypesofDSLandxDSLreferstothefamilyofDSLtechnologies:

The most common techniques permit 1.5 to 1.6 Mbps (megabit per second), which is at least 15 times

fasterthananISDNconnection.

ADSL:

„Asymmetric Digital Subscriber Line“

ThemostcommonformofDSLisADSL

Itentailsonehigh-speed,unidirectionaldatachannelandonelow-speed,bidirectionalcontrolchannel(ma-

kingitasynchronous).Basically,thismeansyoucandownloadfasterthanyoucanupload.ADSLsupports

data rates to 8 Mbps when receiving data (known as the downstream rate) and rates up to

1 Mbps when sending data (known as the upstream rate).

LAN:

„Local Area Network“

A local communication network in a relatively small, predetermined area (such as a room, a building, or a set

ofbuildings)consistingofoneormorecomputers(LANServer),workstations,anetworkoperatingsystem,

anuniformprotocolandspecialcablesascommunicationline.

Server:

AserveristhecontrolcomputeronaLAN,meaningitcontrolsthesoftware,accesstoprintersandother

partsofthenetwork.Ithousesinformationandrespondstorequestsforinformation.

Ethernet:

Networkprotocolforlocalnetworks

Ethernetrepresentsthemostcommontechnologyfortheconnectionoflocalnetworks(LANs).

Protocol:

A specification that describes how computers talk to each other on a network. A protocol is an established

methodofexchangingdataovertheInternet.

The most common protocols are : HTTP, IP, POP, PPP, SMTP, TCP/IP

DHCP:

22

„Dynamic Host Configuration Protocol“

A protocol that provides a mean to allocate IP address dynamically to computers on a LAN. It eliminates the

need to manually assign permanent IP addresses.

TCP/IP:

„Transmission Control Protocol/Internet Protocol“

TheTCP/IPistheStandard-Internet-Protocol.

TheInternet-Protocol(IP)specifiesthetransmissionrouteforthedatapackages.TheTCPprotocol

guaranteesthatallsentbyteswillbereceivedcorrectly.TCP/IPistherefora„routable“protocol.

IP AdDress:

„InternetProtocol“-Address;

A numeric address that is given to computers connected to the Internet.

Gateway:

Asystem forexchanging informationacrossnetworks thatare incompatibleandusedifferentprotocols.

Basically,agatewayisacombinationofhardwareandsoftwarethatconnectstwodifferenttypesof

networkssothatinformationcangetexchanged.Thehardwaredevices(called„bridges“)andthe

computerprogramsperformthenecessarytranslations.

Subnet Mask:

AnumberusedtoidentifyasubnetworksothatanIPaddresscanbesharedonaLAN.

An IP address has two components, the network address and the host address.

DNS:

The Domain Name System (DNS) helps users to find their way around the Internet. Every computer on the

Internethasauniqueaddress-justlikeatelephonenumber-whichisarathercomplicatedstringofnum-

bers. It is called „IP address.“ But it is hard to remember everyone‘s IP address. The DNS makes it

easierbyallowingafamiliarstringofletters(the„domainname“)tobeusedinsteadofthearcane

IP address.

PPP:

„Point to Point Protocol“

ThePPPisadatatransmissionprotocolintheinternet,whichisusedformodem-connections.

PPPoE:

„PPP over Ethernet“

PPPoEistheuseofthenetworkprotocolPPPoveranEthernet-connection.PPPoEisneededtodayforthe

useofanADSLconnection(speciallyinGermany).

PPTP:

„Point to Point Tunneling Protocol“23

PPTPisanetworkprotocol,whichisusedforanADSL-access(speciallyinAustria).

DSL Modem:

TheDSLmodem,servesthetransmissionofdataoveraDSL-line.

Router:

ARouterisaswitching-computer,whichisinvolvedinestablishingaconnectioninacomputernetwork,e.g.

theinternet.Suchswitching-computersroutethedatapackagesonthebasisoftheaddresstothe

respective target computer. The address determines, to which other Router or personal computer the data

mustbesendtoandtheRouterdecidesforeachcase(temporallyanddistance-moderately)themost

favourableway.YoucanalsouseaRoutertofunctionasaswitching-computerbetweenseverallocal

networks(LANs)withauniformprotocol.

Splitter:

Asplitterseparateslanguagetraffic(e.g.atelephone)fromthedatatraffic.

OntheinterfacefordatatrafficanADSLmodemorroutingcanbepluggedon.

GPRS:

„General Packet Radio Service“

TheGPRSisanewnonvoicevalueaddedservicebasedontheIPprotocolthatallowsinformationtobe

sent and received across a GSM mobile telephone network.

TheconventionalGSMnetworkdatatransmissionratesareamaximumof9.6Kbps(bitpersecond),with

GPRStheoreticallyfarover100Kbpsarepossible.Howeversofartheactuallycarriedoutvaluesareapprox.

40Kbps.

APN:

„Access Point Name“

AnAPN-accessiscomparablewithadial-innumber,

whichassignstheGPRS-connectionafunctionality,likeaInternet-,network-orWAP-access

Initstring (AT-command)

AT-commandsareinstructioncodesforintelligentmodems

IntelligentmodemscanbeconfiguredorsteeredbyAT-commands

ISDN:

„Integrated Services Digital Network“

Aninternationalcommunicationsstandardforsendingvoice,video,anddataoverdigitaltelephone

lines or normal telephone wires.

ISDNconsistsoftwo64-KbpsB-channelsandoneD-channelfortransmittingcontrolinformation

S0 Bus (ISDN):

TheS0BusisaninternationalstandardBuswith4wiresbehindtheNTBA(NetworkTerminationforBasic24

Access)whichisresponsiblefortheconnectionoftheISDNterminalequipment.

OnoneS0-Busitispossibletoconnect8terminals

B-Kanal (ISDN):

ISDNconsistsof two64-Kbit/secchannels (called theBchannels).Therewith twoconnectionscanget

established at the same time.

SIM (SIM card)

SIMcardsaretelephonecardsformobilephones.SIMcardsidentifythesubscriberofthetelephone

PIN:

„personal identification number“

ThePINisasecretnumberofaSIM-,credit-orEurochequecard,whichservesfortheidentificationofthe

card owner

WEP:

„Wired Equivalent Privacy“

Securityprotocoltoencryptradiowavesinawirelesslocalareanetwork.AWEPkey-codeisusedforthe

dataencoding.Themorehighlythebit-rateofthekey,themorehighlytheprotection.

RAM:

„RandomAccessMemory“;workingmemoryofthecomputers

TheRAMis(incontrasttotheharddiscdrive)anon-permanentmemory,

the data in the RAM will be stored as long as the current power supply is not interrupted.

UMTS:

UniversalMobileTelecommunicationsSystem(UMTS)isoneofthethird-generation(3G)cellphone

technologies.

TodifferentiateUMTSfromcompetingnetworktechnologies,UMTSissometimesmarketedas3GSM,em-

phasizingthecombinationofthe3GnatureofthetechnologyandtheGSMstandardwhichitwas

designed to succeed.

WCDMA:

WidebandCodeDivisionMultipleAccess isatypeof3Gcellularnetwork.W-CDMAisthehigherspeed

transmission protocol used in the Japanese FOMA system and in the UMTS system, a third generation

follow-ontothe2GGSMnetworksdeployedworldwide.

Moretechnically,W-CDMAisawidebandspread-spectrummobileairinterfacethatutilizesthedirect

sequence Code Division Multiple Access signalling method (or CDMA) to achieve higher speeds and

supportmoreuserscomparedtotheimplementationoftimedivisionmultiplexing(TDMA)usedby2GGSM

networks.

25

HSDPA:

High-SpeedDownlinkPacketAccess(alsoknownasHigh-SpeedDownlinkProtocolAccess)isa3G(third

generation)mobile telephonycommunicationsprotocol in theHigh-SpeedPacketAccess (HSPA) family,

which allows networks based on Universal Mobile Telecommunications System (UMTS) to have higher data

transferspeedsandcapacity.

26 4

Quanmax AG | Division funworldPhotoPlayStr.1,A-4860Lenzing Tel.+43766267850,Fax+437662678555sales@funworld.com,www.funworld.com

4