HX260LTier 4 Final Engine

Net PowerSAE J1349 / 179 HP (133 kW) at 1,950 rpm)

Operating Weight25,600 kg / 56,440 Ibs

Bucket Range1.41yd3 - 1.96yd3

Standard Bucket1.41 yd3

ENGINE

Maker / Model Cummins QSB6.7

Type 4-cycle turbocharged, charger air cooled, diesel engine

Rated flywheel horse power

SAEJ1995 (gross) 190 HP (142 kW) at 1,950 rpm

J1349 (net) 179 HP (133 kW) at 1,950 rpm

DIN6271/1 (gross) 193 PS (142 kW) at 1,950 rpm

6271/1 (net) 181 PS (133 kW) at 1,950 rpm

Max. torque 82.5 kgf·m (597 lbf·ft) at 1500 rpm

Bore X stroke 107×124 mm (4.21"×4.88")

Piston displacement 6700 cc (409in3)

Batteries 2×12V×100 Ah

Starting motor Denso (24V-4.8 kW)

Alternator Denso (24V-95 A)

HYDRAULIC SYSTEM

MAIN PUMP

TypeVariable displacement tandem axis piston pumps

Max. flow 2×228.2 lpm (60.3 gpm)

Sub-pump for pilot circuit Gear pump

Cross-sensing and fuel saving pump system

HYDRAULIC MOTORS

TravelTwo speed axial pistons motor withbrake valve and parking brake

Swing Axial piston motor with automatic brake

RELIEF VALVE SETTINGImplement circuits 350 kgf/cm2 (4,980 psi)

Travel 350 kgf/cm2 (4,980 psi)

Power boost (boom, arm, bucket) 380 kgf/cm2 (5,400 psi)

Swing circuit 300 kgf/cm2 (4,270 psi)

Pilot circuit 40 kgf/cm2 (569 psi)

Service valve Installed

HYDRAULIC CYLINDERS

No. of cylinderbore X stroke

Boom: Ø5.3×52.9 in

Arm: Ø5.7×63.7 in

Bucket: Ø5.1×46.7 in

DRIVES & BRAKES

Drive method Fully hydrostatic type

Drive motor Axial piston motor, in-shoe design

Reduction system Planetary reduction gear

Max. drawbar pull 21,100 kgf (46,500 lbf)

Max. travel speed (high / low) 5.8 km/hr (3.60 mph) / 3.4 km/hr (2.11 mph)

Gradeability 35° (70%)

Parking brake Multi wet disc brake

CONTROL

Pilot pressure operated joysticks and pedals with detachable lever for minimal operator fatigue.

Pilot controlTwo joysticks with one safety lever(LH): Swing and arm, (RH):Boom and bucket (ISO)

Traveling and steering Two levers with pedals

Engine throttle Electric, Dial type

OPERATING WEIGHT (APPROXIMATE)

Operating weight, including 5,850mm (19' 2") boom, 3,050mm (10' 0") arm, SAE heaped 1.08m3 (1.41 yd3) bucket, lubricant, coolant, full fuel tank, full hydraulic tank, and all standard equipment.

OPERATING WEIGHTShoes Operating weight Ground pressure

TypeWidth mm (in)

kg (lb) kgf/cm2 (psi)

Triple grouser

600 (24") HX260 L 25,600 (56,440) 0.52 (7.40)

700 (28") HX260 L 25,900 (57,100) 0.45 (6.40)

800 (32") HX260 L 26,200 (57,760) 0.40 (5.69)

900 (36") HX260 L 26,500 (58,420) 0.36 (5.12)

SWING SYSTEM

Swing motor Fixed displacement axial piston motor

Swing reduction Planetary gear reduction

Swing bearing lubrication Grease-bathed

Swing brake Multi wet disc brake

Swing speed 10.8 rpm

SERVICE REFILL CAPACITIES

Re-filling liters US gal

Fuel tank 400 106

Engine coolant 40 10.6

Engine oil 23 6.1

Swing device 7 1.85

Final drive (each) 4.5 1.19

Hydraulic system (including tank) 275 90.9

Hydraulic tank 160 41.25

DEF/AdBlue® 27 7.1

UNDERCARRIAGE

The X-leg type center frame is integrally welded with reinforced box-section track frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock absorbing springs and sprockets, and a track chain with double or triple grouser shoes.

Center frame X - leg type

Track frame Pentagonal box type

No. of shoes on each side 51 EA

No. of carrier roller on each side 2 EA

No. of track roller on each side 9 EA

No. of rail guard on each side 2 EA

01

B B' C

D

E

A

A'

F

8ft

Unit : mm (ft·in)

Boom length5.850

(19' 2")

Arm length2,100

(6' 11")2,500(8' 2")

3,050(10' 0")

3,600(11' 10")

AMax. digging reach

9,550(31' 4")

9,870(32' 5")

10,360(34' 0")

10,870(35' 8")

A’Max. digging reach on ground

9,360(30' 9")

9,680(31' 9")

10,190(33' 5")

10,700(35' 1")

BMax. digging depth

6,050(19'10")

6,450(21' 2")

7,000(23' 0")

7,550(24' 9")

B’Max. digging depth (8' level)

5,840(19' 2")

6,260(20' 6")

6,830(22' 5")

7,400(24' 3")

CMax. vertical wall digging depth

5,480(18' 0")

5,640(18' 6")

6,150(20' 2")

6,830(22' 5")

DMax. digging height

9,450(31' 0")

9,460(31' 0")

9,670(31' 9")

9,920(32' 7")

EMax. dumping height

6,360(20' 10")

6,420(21' 1")

6,630(21' 9")

6,860(22' 6")

FMin. swing radius

4,420(14' 6")

4,200(13' 9")

3,980(13' 1")

3,900(12' 10")

HX260L WORKING RANGEHX260L DIMENSIONS

5.85 m (19' 2") BOOM and 2.1 m (6' 11"), 2.5 m (8' 2"), 3.05 m (10' 0"), 3.6 m (11' 10") ARM

Unit : mm (ft·in)

A Tumbler distance 3,830 (12' 7")

B Overall length of crawler 4,640 (15' 3")

C Ground clearance of counterweight 1,110 (3' 6")

D Tail swing radius 2,975 (9' 9")

D’ Rear-end length 2,870 (9' 5")

E Overall width of upperstructure 2,840 (9' 4")

F Overall height of cab 3,050 (10' 0")

G Min. ground clearance 480 (1' 7")

H Track gauge 2,580 (8' 6")

I Overall height of guardrail 3,260 (10' 7")

Boom length5,850

(19' 2")

Arm length2,100

(6' 11")2,500(8' 2")

3,050(10' 0")

3,600(11' 10")

J Overall length10,050(33' 0")

10,000(32' 10")

9,920(32' 7")

9,910(32' 6")

K Overall height of boom3,530

(11' 7")3,590

(11' 9")3,220

(10' 7")3,590

(11' 9")

L Track shoe width 600 (24") 700 (28") 800 (32") 900 (36")

M Overall width3,180

(10' 5")3,280

(10' 9")3,380

(11' 1")3,480

(11' 5")

D(D') E

F

C

I

J

K

B

A

ML

H

G

DIGGING FORCE

BoomLength mm (ft·in) 5,850 (19' 2")

RemarkWeight kg (lb) 2,460 (5,420)

ArmLength mm (ft·in) 2,100 (6' 11") 2,500 (8' 2") 3,050 (10' 0") 3,600 (11' 10")

Weight kg (lb) 1,420 (3,130) 1,450 (3,200) 1,540 (3,400) 1,600 (3,530)

Bucketdiggingforce

SAE

kN 156.9 [170.4] 156.9 [170.4] 156.9 [170.4] 156.9 [170.4]

[ ] :Power Boost

kgf 16000 [17370] 16000 [17370] 16000 [17370] 16000 [17370]

lbf 35270 [38290] 35270 [38290] 35270 [38290] 35270 [38290]

ISO

kN 178.5 [193.8] 178.5 [193.8] 178.5 [193.8] 178.5 [193.8]

kgf 18200 [19760] 18200 [19760] 18200 [19760] 18200 [19760]

lbf 40120 [43560] 40120 [43560] 40120 [43560] 40120 [43560]

Armcrowd force

SAE

kN 134.4 [145.9] 130.4 [141.6] 114.7 [124.6] 104.0 [112.9]

kgf 13700 [14870] 13300 [14440] 11700 [12700] 10600 [11510]

lbf 30200 [32790] 29320 [31830] 25790 [28000] 23370 [25370]

ISO

kN 139.3 [151.2] 134.4 [145.9] 118.7 [128.8] 107.9 [117.1]

kgf 14200 [15420] 13700 [14870] 12100 [13140] 11000 [11940]

lbf 31310 [33990] 30200 [32790] 26680 [28970] 24250 [26330]Note : Boom weight includes arm cylinder, piping, and pin

Arm weight includes bucket cylinder, linkage, and pin

02

HX260L LIFTING CAPACITY - 5.85 m (19’ 2”) boom equipped with 1.08 m3 (SAE heaped) bucket and 600 mm (24”) triple grouser shoe

Load pointheightm (ft)

Load radius At max. reach1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach

m (ft)

Arm Length m (ft)

2.10 m (6’ 11”)

2.10 m (6’ 11”)

2.50 m (8’ 2”)

2.50 m (8’ 2”)

2.10 m (6’ 11”)

2.10 m (6’ 11”)

2.50 m (8’ 2”)

2.50 m (8’ 2”)

2.10 m (6’ 11”)

2.10 m (6’ 11”)

2.50 m (8’ 2”)

2.50 m (8’ 2”)

2.10 m (6’ 11”)

2.10 m (6’ 11”)

2.50 m (8’ 2”)

2.50 m (8’ 2”)

2.10 m (6’ 11”)

2.10 m (6’ 11”)

2.50 m (8’ 2”)

2.50 m (8’ 2”)

2.10 m (6’ 11”)

2.10 m (6’ 11”)

2.50 m (8’ 2”)

2.50 m (8’ 2”)

2.10 m (6’ 11”)

2.50 m (8’ 2”)

6.0 m kg *5710 *5710 *5160 3180 *4790 2950 8.32 8.67

(20 ft) lb *12590 *12590 *11380 7010 *10560 6500 (27.3) (28.4)

4.5 m kg *7730 *7730 *6430 5580 *5960 5660 *5920 3690 *5520 3740 4510 2680 4250 2510 8.91 9.23

(15 ft) lb *17040 *17040 *14180 12300 *13140 12480 *13050 8140 *12170 8250 9940 5910 9370 5530 (29.2) (30.3)

3.0 m kg *10170 8250 *9430 8430 *7520 5210 *7100 5270 5920 3540 5950 3560 4200 2450 3960 2290 9.17 9.48

(10 ft) lb *22420 18190 *20790 18580 *16580 11490 *15650 11620 13050 7800 13120 7850 9260 5400 8730 5050 (30.1) (31.1)

1.5 m kg *12210 7570 *11660 7660 8300 4870 *8260 4890 5740 3370 5740 3370 4160 2410 3920 2240 9.14 9.45

(5 ft) lb *26920 16690 *25710 16890 18300 10740 *18210 10780 12650 7430 12650 7430 9170 5310 8640 4940 (30.0) (31.0)

Ground kg *13090 7300 *12850 7280 8050 4650 8040 4640 5620 3260 5590 3240 4410 2560 4120 2360 8.80 9.13

Line lb *28860 16090 *28330 16050 17750 10250 17730 10230 12390 7190 12320 7140 9720 5640 9080 5200 (28.9) (30.0)

-1.5 m kg *15540 15310 *15190 15040 *13000 7280 *13050 7200 7990 4590 7930 4540 5540 3190 5060 2970 4670 2710 8.13 8.49

(-5 ft) lb *34260 33750 *33490 33160 *28660 16050 *28770 15870 17610 10120 17480 10010 12210 7030 11160 6550 10300 5970 (26.7) (27.9)

-3.0 m kg *16450 *16450 *17010 15630 *17960 15340 *12000 7440 *12340 7310 8100 4700 7990 4590 *6210 3970 5940 3520 6.98 7.41

(-10 ft) lb *36270 *36270 *37500 34460 *39590 33820 *26460 16400 *27210 16120 17860 10360 17610 10120 *13690 8750 13100 7760 (22.9) (24.3)

-4.5 m kg *13270 *13270 *14720 *14720 *9380 7840 *10300 7630

(-15 ft) lb *29260 *29260 *32450 *32450 *20680 17280 *22710 16820

Load point

height

m (ft)

Load radius At max. reach1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) 9.0 m (30 ft) Capacity Reach

m (ft)

Arm Length

m (ft)

3.05 m

(10’ 0”)

3.05 m

(10’ 0”)

3.60m

(11’ 10”)

3.60m

(11’ 10”)

3.05 m

(10’ 0”)

3.05 m

(10’ 0”)

3.60m

(11’ 10”)

3.60m

(11’ 10”)

3.05 m

(10’ 0”)

3.05 m

(10’ 0”)

3.60m

(11’ 10”)

3.60m

(11’ 10”)

3.05 m

(10’ 0”)

3.05 m

(10’ 0”)

3.60m

(11’ 10”)

3.60m

(11’ 10”)

3.05 m

(10’ 0”)

3.05 m

(10’ 0”)

3.60m

(11’ 10”)

3.60m

(11’ 10”)

3.05 m

(10’ 0”)

3.05 m

(10’ 0”)

3.60m

(11’ 10”)

3.60m

(11’ 10”)

3.05 m

(10’ 0”)

3.05 m

(10’ 0”)

3.60m

(11’ 10”)

3.60m

(11’ 10”)

3.05 m

(10’ 0”)

3.60m

(11’ 10”)

6.0 m kg *3610 *3610 *3820 *3820 *4350 2610 3900 2280 9.22 9.77

(20 ft) lb *7960 *7960 *8420 *8420 *9590 5750 8600 5030 (30.2) (32.1)

4.5 m kg *5240 *5240 *4950 3790 *4380 3830 *2380 *2380 3850 2230 3460 1950 9.74 10.27

(15 ft) lb *11550 *11550 *10910 8360 *9660 8440 *5250 *5250 8490 4920 7630 4300 (32.0) (33.7)

3.0 m kg *13500 *13500 *8280 *8280 *6430 5350 *5730 5440 *5550 3590 *5030 3610 *3480 2470 3590 2040 3240 1790 9.98 10.49

(10 ft) lb *29760 *29760 *18250 *18250 *14180 11790 *12630 11990 *12240 7910 *11090 7960 *7670 5450 7910 4500 7140 3950 (32.7) (34.4)

1.5 m kg *9550 *9550 *12720 *12720 *10740 7810 *9770 7990 *7690 4930 *7090 4980 5740 3370 5740 3360 4140 2340 3550 1990 3190 1730 9.95 10.46

(5 ft) lb *21050 *21050 *28040 *28040 *23680 17220 *21540 17610 *16950 10870 *15630 10980 12650 7430 12650 7410 9130 5160 7830 4390 7030 3810 (32.6) (34.3)

Ground kg *10670 *10670 *11130 *11130 *12350 7280 *11720 7330 8030 4610 8030 4610 5550 3190 5510 3150 4030 2230 3700 2070 3310 1800 9.65 10.18

Line lb *23520 *23520 *24540 *24540 *27230 16050 *25840 16160 17700 10160 17700 10160 12240 7030 12150 6940 8880 4920 8160 4560 7300 3970 (31.7) (33.4)

-1.5 m kg *10030 *10030 *9120 *9120 *13960 *13960 *13310 *13310 *12950 7090 *12690 7020 7840 4450 7780 5370 5450 3100 5370 3020 4210 2340 3640 2010 9.05 9.62

(-5 ft) lb *22110 *22110 *20110 *20110 *30780 *30780 *29340 *29340 *28550 15630 *27980 15480 17280 9810 17150 11840 12020 6830 11840 6660 9080 5160 8020 4430 (29.7) (31.6)

-3.0 m kg *13630 *13630 *12230 *12230 *18520 14940 *16930 14640 *12640 7120 *12750 6970 7830 4440 7710 5340 5340 2990 5060 2940 4360 2470 8.06 8.71

(-10 ft) lb *30050 *30050 *26960 *26960 *40830 32940 *37320 32280 *27870 15700 *28110 15370 17260 9790 17000 11770 11770 6590 11160 6480 9610 5450 (26.4) (28.6)

-4.5 m kg *17920 *17920 *15940 *15940 *16430 15430 *17690 15030 *11230 7350 *11810 7120 *8010 4620 7820 *5820 4460 *5630 3510 6.48 7.30

(-15 ft) lb *39510 *39510 *35140 *35140 *36220 34020 *39000 33140 *24760 16200 *26040 15700 *17660 10190 17240 *12830 9830 *12410 7740 (21.3) (24.0)

Rating over-front Rating over-side or 360 degree

1. Lifting capacity are based on SAE J1097 and ISO 10567.2. Lifting capacity of the HX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full

hydraulic capacity.

3. The load point is a hook located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.5. Additional lifting capacity charts are available upon request.

03

www.hceamericas.com HCEA Rev 7/2015

PLEASE CONTACT

6100 ATLANTIC BOULEVARD NORCROSS GA 30071 U.S.A TEL: (1) 678-823-7802 FAX: (1) 678-823-7778

ENGINE STD OPT

Cummins QSB 6.7 engine ●

HYDRAULIC SYSTEM

Intelligent Power Control (IPC)3-power mode, 2-work mode, user mode ●

Variable Power Control ●

Pump Flow Control ●

Attachment Mode Flow Control ●

Engine Auto Idle ●

Engine Auto Shutdown Control ●

Electronic Fan Control ●

CAB & INTERIOR STD OPT

ISO Standard cabinRise-up type windshield wiper ●

Radio / USB player ●

Bluetooth / Handsfree mobile phone system with USB ●

Miracast ●

12 volt power outlet (24V DC to 12V DC converter) ●

Electric horn ●

All-weather steel cab with 360° visibility ●

Safety glass windows ●

Sliding fold-in front window ●

Sliding side window (LH) ●

Lockable door ●

Hot & cool box ●

Storage compartment & Ashtray ●

Transparent cabin roof-cover ●

Sun visor ●

Door and cab locks, one key ●

Mechanical suspension seat with heater ●

Pilot-operated adjustable joystick ●

Console box height adjust system ●

Automatic climate controlAir conditioner & heater ●

Defroster ●

Starting Aid (air grid heater) for cold weather ●

Centralized monitoring8" LCD display ●

Engine speed or Trip meter/Accel. ●

Engine coolant temperature gauge ●

Max power ●

Low speed/High speed ●

Auto idle ●

Overload ●

Check Engine ●

Air cleaner clogging ●

Indicators ●

ECO Gauges ●

Fuel level gauge ●

Hyd. oil temperature gauge ●

Fuel warmer ●

Warnings ●

Communication error ●

Low battery ●

Clock ●

Cabin lights ●

Cabin front window rain guard ●

Cabin roof-steel cover ●

SeatAdjustable air suspension seat with heater ●

Cabin FOPS/FOGFOPS (Falling Object Protective Structures) ISO 3449 Level 2 ●

FOG (Falling Object Guard)·ISO/DIS 10262 Level 2

Front & Top Guard ●

Top Guard ●

Cabin ROPSROPS (Roll Over Protective Structures) ISO 12117-2 ●

SAFETY STD OPT

Battery master switch ●

Rearview camera ●

AAVM (All Around View Monitoring) ●

Four front working lights ●

Dual boom working lights ●

Travel alarm ●

Rear work lamp ●

Beacon lamp ●

Automatic swing brake ●

Boom holding system ●

Arm holding system ●

Safety lock valve for boom cylinder with overload warning device

●

Safety lock valve for arm cylinder ●

Swing Lock System ●

Three outside rearview mirrors ●

OTHER STD OPT

Booms5.85 m, 19' 2" ●

Arms2.1 m, 6' 11" ●

2.5 m, 8' 2" ●

3.05 m, 10' 0" ●

3.60 m, 11' 10" ●

Removable clean-out dust net for cooler ●

Removable reservoir tank ●

Fuel pre-filter ●

Fuel warmer ●

Self-diagnostics system ●

Hi-mate (Remote Management System) Mobile ●

Satellite ●

Batteries (2 x 12V x 100 AH) ●

Fuel filler pump (50 lpm / 13 gpm) ●

Single-acting piping kit (breaker, etc.) ●

Double-acting piping kit (clamshell, etc.) ●

Rotating Piping Kit ●

Quick coupler piping ●

Quick coupler ●

Boom floating control ●

One Pedal Straight Travel System ●

Accumulator for lowering work equipment ●

Pattern change valve (2 patterns) ●

Fine Swing Control System ●

Tool kit ●

UNDERCARRIAGE STD OPT

Lower frame under cover (Additional) ●

Lower frame under cover (Normal) ●

Track shoesTriple grousers shoes (600 mm, 24") ●

Triple grousers shoe (700 mm, 28") ●

Triple grousers shoe (800 mm, 32") ●

Triple grousers shoe (900 mm, 36") ●

Double grousers shoe (700 mm, 28") ●

Track rail guard ●

Full track rail guard ●

* Standard and optional equipment may vary. Contact your Hyundai dealer for more information.

The machine may vary according to International standards.* The photos may include attachments and optional equipment that are not available in your area.* Materials and specifications are subject to change without advance notice.* All imperial measurements rounded off to the nearest pound or inch.

04