nested based cnc-router vantech series 480 | 510 | 512dust extraction port dust extraction volume...
TRANSCRIPT
Nested Based CNC-RouterVantech Series 480 | 510 | 512
MATRIX
5
Configuration
•12 HP (9 kW) HSK-routing spindle
•Option: 16 HP (12 kW) HSK-routing spindle
Tool length control
•After tool change a control of the length is carried out and checked with the tool data file
Tool changing system with tool pick-up station
•Vantech 480: 7 places•Vantech 510/512: 8 places
Synchronous drive
•2 synchronized X-drives guarantee highest processing quality
Vacuum pumps
•Vantech 480: in total 324 m3/h, 60 Hz (3 x 108 m3/h, 60 Hz)
•Vantech 510/512: in total 432 m3/h, 60 Hz (4 x 108 m3/h, 60 Hz)
Vantech Series
Sta
ndar
ds
2 Vantech Series
1 3
4
2
76
4
5
2
3
1
Basic Machine
X X
Highlights:
y Gantry style – Dual drive for highest precision over the total working width
y 2 synchronized digital servo-drives in X-direction
y Extremly high acceleration
y 96 m/min vector speed
y The whole working field is reachable with all processing tools
y Efficient use of energy through high vacuum performance è Low power consumption
y Electronic surveillance of all stops
y 12 HP (9 kW) HSK routing spindle (optionally: 16 HP (12 kW))
y Software bundle for machine and PC
Quick Pod Starter Set
•Different clamping elements available as option
Vertical drilling block [High-Speed 7500]
•7 vertical drilling spindles
Vertical drilling block [High-Speed 7500] and 7-fold tool changer
•12 vertical drilling spindles•7-fold tool changer (Option: 13-fold tool changer)(The lateral linear tool magazine is omitted)
Extention stop system
•4 pneumatically lowerable Aluminium stop cylinders (front left hand side)
•4 pneumatically lowerable Aluminium stop cylinders (front right hand side)
Air-conditioning
•Air-conditioned switch cabinet
Equipment as described in this brochure is subject to technical changes and further developments. Technical data refer to standard equipment and are not binding for the order.
Op
tions
3Vantech Series
8
8
9
9
6 7
MATRIX
Lowerable fence guide and program controlled positioning
•Suitable for safe outfeed of workpieces. Electronic surveillance of all guides and stops
Transport belt
•A workpiece safety control device is attached at the end of the of the conveyor belt, this stop function can be deactivated via a foot switch
Push-off device
•Automatic push-off device, mounted to the gantry, for pushing off workpieces
Dust extraction channel at the outfeed from below
•For cleaning of the work-pieces during feeding out
Dust extraction channel at the outfeed from top
•For cleaning of the work-pieces during feeding out
Vantech Series
Op
tions
4 Vantech Series
1
21
2
4 5
3
3
Basic Nesting Solution
Option: Label Printing Terminal
•PC•Flatscreen•Label printer•Software: woodNest Professional and OfficetoMachine
Equipment as described in this brochure is subject to technical changes and further developments. Technical data refer to standard equipment and are not binding for the order.
5Vantech Series
5
4
MATRIX
Op
tions
Tool pick-up station
•Secure and fast feeding of the tool changer magazine
Transfer rollers
•Intermediary transfer rollers to prevent scratching during the loading process
Vantech Series
Lowerable fence guide and program controlled positioning
•Suitable for safe outfeed of workpieces. Electronic surveillance of all guides and stops
Vacuum arm for positioning
•The vacuum arm takes over a pre-positioned raw board and aligns these against the end of the table in X direction
Lifting table
•For easy infeeding
6 Vantech Series
1 2
2
5
3
4
3
1
Concept 2 Nesting Solution
Tool changing system
•7-fold tool changer•Option: 13-fold tool changer
Dust extraction channel at the outfeed from below
•For cleaning of the work-pieces during feeding out
Dust extraction channel at the outfeed from top
•For cleaning of the work pieces during feeding out
Equipment as described in this brochure is subject to technical changes and further developments. Technical data refer to standard equipment and are not binding for the order.
Transport belt
•A workpiece safety control device is attached at the end of the of the conveyor belt, this stop function can be deactivated via a foot switch
Option: Label Printing Terminal
•PC•Flatscreen•Label printer•Software: woodNest Professional and OfficetoMachine
7Vantech Series
7
6
6
7
5
4
8
8
9
9
Option
woodWOP
•Modern software based on Windows©
•More than 30,000 installations worldwide
powerControl
•17“ TFT monitor•Dial in capability•USB frontside bus•Ethernet connection 10/100 Mbit•Option: Ergonomic hand terminal
woodWOP
•Modern software based on Windows©
•More than 30,000 installations worldwide
woodAssembler
•To visualize woodWOP- programs (MPR) in 3D
•Enables the construction of individual workpieces to finished objects
woodWOP DXF Basic
•Interface for CAD-Data Import
•Basis to generate woodWOP programs
3D CNC-Simulator
•Simulates the processing in the order it is stored in the NC-program
•Allows time calculation •Collision check of the
vacuum cups
MCC
•Simple control of main machine functions through soft keys
•Graphical loading
Machine Data Recording Basic
•Machine Data Recording – collecting and evaluating machine states via time meter and event meter
woodNest Basic
•Software for manual nesting of shaped parts
So
ftw
are
| Mac
hine
So
ftw
are
| Offi
ce
Software
8 Vantech Series
9Vantech Series
1000/ 39.4"
Vantech 480: 2500 / 98.4"
Vantech 510: 3100 / 122"
Vantech 512: 3700 / 145.7"
Vant
ech
510/
512:
15
50 /
61.
0"
Vant
ech
480:
12
50 /
49.
2"
W
L
W
L
X
Y
W
Y
L
X
Technical data
mm / inchIncluded safety device
Included safety device
Included safety device
Bas
ic M
achi
neB
asic
Nes
ting
So
lutio
nC
onc
ept
2 N
estin
g S
olu
tion
10 Vantech Series
100
mm
3.9
inch
Z
Travel range
Working field Basic Machine
Basic Machine
* Basic Machine
Basic Machine
Basic Nesting Solution
Basic Nesting Solution
Basic Nesting Solution
Concept 2 Nesting Solution
Concept 2 Nesting Solution
Concept 2 Nesting Solution
Floor space
245 / 9.6
2520Vantech 480
Vantech 480
Vantech 480
Vantech 480
Vantech 480
/ 99.2 / 49.21250 100 / 3.9
mm / inch
mm / inch
3100 Vantech 510
Vantech 510
Vantech 510
Vantech 510
Vantech 510
/ 122.0 / 61.01550 100 / 3.93700 Vantech 512
Vantech 512
Vantech 512
Vantech 512
Vantech 512
/ 145.7 / 61.01550 100 / 3.9
245 / 9.6245 / 9.6
Vector speed X/Y - Z-axisCompressed air connectionCompressed air requiredDust extraction portDust extraction volumeElectrical power – total connection load
96 - 25R ½7Ø 200*
3170*min.27,5
m/min
barmm
m³/hkW
inch
3710 / 146.1 / 76.81652
6830
9405
12405
6330
7830
10330
7330
1004
13651
/ 268.9
/ 370.3
/ 488.4
/ 249.2
/ 308.3
/ 406.7
/ 288.6
/ 393.8
/ 537.4
/ 174.0
/ 185.8
/ 185.8
/ 160.6
/ 177.2
/ 177.2
/ 174.0
/ 185.8
/ 185.8
4420
4720
4720
4080
4501
4501
4420
4720
4720
4290 / 168.9 / 76.819524890 / 192.5 / 76.81952
11Vantech Series
Sub
ject
to te
chni
cal c
hang
e w
ithou
t not
ice.
Mis
prin
ts a
nd e
rror
s ex
cept
ed.
Illust
ratio
ns m
ay s
how
opt
iona
l equ
ipm
ent n
ot in
clud
ed in
the
basi
c pr
ice.
WEEKE Bohrsysteme GmbHBenzstrasse 10-1633442 Herzebrock-ClarholzGERMANYTel.: +49 5245 445-0 Fax: +49 5245 445-44 [email protected]
Member of the HOMAG Group
You may contact us – WORLDWIDE
•Teleservice possibility via basic internet-connection (TSN-possibility)
•Competent spare parts service
•WEEKE Communication: Up-to-date information at all times: www.weeke.com
•Any questions, new ideas, criticism & praise to: [email protected]
For the Success of Original TechnologyA VDMA Campaign
Vant
ech
Ser
ies
05/2
013