neodent catalog of products

1

14

28

54

80

98

110

118

132

140

156

Technical Guidance

Morse Taper

External Hex

Internal Hex

Transgingival

Zygomatic

Surgical Techniques

Instrumental

Surgical Instruments

Orthodontic Anchorage and Bone Grafting

2

Neodent is much more than dental implants .

It’s a company made for you.

3

earea100%Braziliancompanywithover16yearsofhistory,focusedessentiallyonourclients.Wehaveasmaincharacteristictoprovidesolutionswithhightechnologyandassuredquality.Operatinginfivecontinents,weareproudtobeoneofthebiggestmanufacturersofdentalimplantsandprostheticcomponentsintheworld.

LeaderinBrazil,wehavethesatisfactionofourclientsasourmainobjective.Therefore,wearecommitedtoworkwithseriousnessanddedicationtoofferyoumuchmorethandentalimplants.Thisyoualreadyknow.Whatmaybeyoudon´tknowisthat"muchmore"impliesinaggregatevaluesandqualitiesthatactdirectlywithyourwork.“Muchmore”wastheresultofour

commitmenttoresearchanddevelopmentofnewtechnologies,whichalliedwithsustainability,resultsinamodernindustrialcomplexwhichisenvironmentallycorrect.The“muchmore”ispresentfromourtechnicalsupport,preparedtoanswerwithexcellence,evenincriticalsituations.Wewanttoalwaysbemuchmore,sothatyoualsocontinuebeingso.

W

4

To guarantee our innovative potential and high technology, we inaugurated in 2009 the New Industrial

Complex with 12.000 m² in one plot of 50.000m², expanding the production potential like no other

one in Latin America. The entire project was thought up so that the structure could transmit our values:

advances in technology, respect for human beings and socio-environmental responsibility.

Besides being able to count upon the best

and most modern robotic equipment, the New

Industrial Complex hosted a complete materials

laboratory: The Integrated Laboratory of Materials

– LIM, aimed directly at research, development

and quality control. In LIM, we have the Scanning

Electron Microscope (MEV), which assures

quality from the raw-material through to the end

product. The equipments for mechanical and

metallographic tests assess long-term resistance

and enable the microstructural analysis of

products. All of this is reflected in excellence for

you, client who trusts and takes our name into

your consulting room.

Continuous Development and Quality Control

The industry

PRODUCTION

QUALITY CONTROL

5

SA

LA L

IMPA

SCANNING ELECTRONIC MICROSCOPE

CYCLIC MECHANICAL TESTS

CLEAN ROOM

6

The respect to human standards is a principle trait in the architectural design of the New Industrial Complex,

highlighted by the preference for naturally lit environment and of the use of materials and technologies that

provide greater thermoacoustic comfort. Now, our employees have much more infrastructure and ergonomy

for their daily activities. We also have a fully-equipped restaurant visually integrated into the grove, which

attends to the necessities of the employees and visitors, including during the diverse events promoted.

Concerned with constant trainning, we constructed a spacious auditorium to promote the transmission of

knowledge, one of the important pillars of our essence. Besides intellectual development, encouragement

towards sport is also a priority: sport courts, a golf course, football and wood forest for hiking. These values

are the base of a strong trademark that focuses on the people and works for their wellbeing.

Respect to human standards

SPORT COURTS

AU

DIT

OR

IUM

: C

ON

STA

NT

PR

OFE

SIO

NA

L TR

AIN

ING

RESTAURANT

7

We work with socio-environmental responsibility, respecting

the ideal conditions for growth without harming the planet,

and evoking the same consciousness in the whole team of

employees and partners.

Environment

LIQUID TREATMENT STATION

PREFERENCE FOR NATURAL LIGHT

8

We count on the scientific support of ILAPEO – The Latin American Institute of Research

and Dental Education - , a centre of excellence in research, advances and innovations

in the clinical practice of dentistry. An institute made up of professionals, professors

and researchers of the highest level of knowledge who offer post-graduate

courses, such as specialisation and master’s degree, recognised by CFO, MEC

and CAPES.

AUDITORIUM

MULTIDISCIPLINARY LABORATORY

BLUE CLINIC RECEPTION

9

•RDC 59/2000 – ANVISA - Certificate of Good Practices in the Manufacture and Control of Health

Products;

•ISO 13485 – Health Products – Systems Quality Management – Requisites for regulatory

purposes;

•CE MARK – European Directive 93/42 CEE – Relative to the Medical Devices;

•ISO 9001 – Systems Quality Management.

Certificates Quality certificates

Thelargestcompanyinthe

Brazilianmarket,andoneofthe

biggestintheworldmarket,now

operatinginU.S.A.

COMMERCIAL HEADQUARTERS

As well as industrial and commercial headquarters in Curitiba (PR) state

of Paraná,Brazil, we also have ten branches in São Paulo (capital),

Bauru, Rio de Janeiro, Belo Horizonte, Porto Alegre, Goiânia,

Brasília, Londrina, Recife and Vitória. Eight authorised

distributers installed in seven states (Amazonas, Bahia,

Mato Grosso, Mato Grosso do Sul, Pará, Santa

Catarina and Tocantins), as well as branches in

Lisbon, Portugal and U.S.A. An international

network is spread across more than

13 countries: Argentina, Bolivia, Chile,

Colombia, Spain, Italy, Lebanon, Morocco,

Peru, Dominican Republic, Taiwan,

Thailand and Venezuela.

Contact Always here for your needs, you can

count on our channels of communication:

•SAC 08007072526

•Ombuds 08007256363

•www.neodent.com.br

•www.neodentusa.com

A global company

10

NE

OS

HA

PE

1.Pacient

2.Scanning

3.CADmouldingin3Dplanning

software

4.CustomizedpiecefabricationinNEODENTMilling

Center

5.Endoftheprosthesis

withporcelainapplication

•Single or multiple Copings;

•Infrastructures of fixed prosthesis;

•Infrastructures of hybrid prosthesis (protocol);

•Customized Abutments;

•Acrylic Infrastructures.

•Micrometric adaption;

•Optimization of production time;

•3D Virtual 3D waxing;

•Laser Technology - Precision and

quickness in scanning.

AvailableNeoshapeSystemProducts: Differentials:

The Neoshape CAD/CAM System allows the choice of diverse materials with an

emphasis on Zirconia, Cobalt Chromium, Titanium and Acrylic.

Welcome to the technological innovations that now present themselves to the world of prosthesis. Neodent has

the pride and pleasure to announce the Neoshape CAD CAM System. A system that combines new market trends

to guarantee precision and quality in the production of the existing prostheses. This breakthrough opens new

horizons, offering excellence in personalised aesthetics and planning with digital precision.

CAD CAM SYSTEM

11

HowtheNeoshapeCAD/CAMSystemworks:

TheMillingCenter

The dental prosthesis technician (DPT) can plan on

the computer screen in three-dimensional shape

all aesthetic and functional details of differents

prosthetic resolutions in day-to-day laboratorial.

After the virtual waxing conclusion, a computer file is

sent to the Neodent Milling Center. The information

management is carried out on every received case;

then, the file is forwarded to manufacture, where

the latest equipment, dedicated exclusively to the

Neoshape System, produces the received cases with

precision and quality guarantee.

There is where the waxing stops being virtual and

becomes real, adding up Neodent technology to the

professional knowledge and patient biotype, making

smiles more natural and beautiful.

The Neoshape System offers a large library of

prosthetic interfaces jointly with its 3D modeling

software.

The fabrication process starts with the receiving of

the 3D archive, already projected by the prothesis

technician, using the CAD modeling software (virtual

waxing).

Then, the CAM software defines the best strategy for

the production of the received file, taking into account

the dimensions and the particularities of each case, in

order to get the result exactly as the same projected by

a professional.

The latest technology machines execute the milling in

an efficient way and with high precision, making the

fabrication possible from the single copings through to

complete arches.

The exquisite finishing of the margin lines, edges and

the adaption of the copings and customized abutments

with the help of Neoshape system are insurmountable.

Amongstthem:

•Rotational External Hex;

•Anti-rotational External Hex;

•Mini Conical Abutment;

•Universal Post;

Also, there is a available option: the metallic

interfaces, cemented to the personalised abutments,

so that the contact of the implant is obtained

through metal with metal.

•Anti-rotational External Hex;

•Internal Hex.

Once all the fabrication procedures are

concluded, the products are sent directly to the

professionals, who now has more time to

carry out the perfect layering of

the porcelain, ensuring

quality and aesthetics

in their work.

Independent from the chosen material for

the prosthesis construction, the mechanical

properties and the quality guarantee are ensured

by international raw materials of controlled origin,

reinforcing our ethical commitment and offering

you products with excellence.

CA

D C

AM

SYS

TEM

12

Ne

oP

oro

s

Following years of intense research and development

of new technologies, Neodent has achieved the

most modern and current techniques for the surface

treatment of implants: the Neoporos Surface.

Based on the abrasive blasting concept followed by

acid subtraction, the Neoporos Surface promotes, from

on the use of oxides with controlled granulometry,

irregular craters on the implant surface, which are then

standardized by the acid subtraction technique.

The surface uniformity is obtained during the abrasive

blasting and is assured by virtue of the speed robotised

control, pressure and particle size that collide with the

implant.

Various scientific studies are still under way, so that the

Neoporos surface is always evolving and promoting

much more security for you

Electronic microscopes of the

Neoporos Surface in amplifications of 2000X and 5000X.

Roughness controlled to guarantee the size of the pores between

2.5 and 5.0μm in the entire implant

surface.

SurfaceConstantevolutionandsecurityguarantee

13

Histological study of the bone tissue response of

Neodent implants with Neoporos Surface.

Bone crest formed over a cervical portion of the Morse taper implants with Neoporos surface

after a period of osseointegration.

Direct contact of the bone to the implant, showing osteogenesis by contact and the osseous induction potential of Neoporos Surface.

Surface

14

T e c h n i c a l G u i d a n c e

15

T e

c h

n i

c a

l

G u

i d

a n

c e

16

In accordance with the bone classification of Lekholm and Zard (1985)

IMPLANTINDICATIONTABLE

Bone type IIBone type I Bone type III Bone type IV

Alvim Implant Apex"C" Implant Apex EX Implant Apex "M" Implant Apex

with Mount

with Mount

Morse Taper

Morse Taper

Morse Taper

17

Conical and Slim Fit Abutment (Ø 4.1 and Ø 4.3)

Conical Abutment (Ø 5.0)

Mini Conical Abutment (Ø 4.1 and Ø 4.3)

Mini Conical Abutment (Ø 5.0)

Mini Abutment Slim Fit

Universal Post, Personalizable, Angled and Slim Fit

UCLA (ø3.3)

UCLA (ø4.1; ø4.3; ø5.0)

Mini Ball Attachment

Cylinders

20N.cm

20N.cm

20N.cm

20N.cm

32N.cm

32N.cm

32N.cm

32N.cm

20N.cm

32N.cm

15N.cm

32N.cm

20N.cm

20N.cm

20N.cm

20N.cm

20N.cm

10N.cm

20N.cm

10N.cm

10N.cm

20N.cm

32N.cm

32N.cm

15N.cm

CM and WS Abutment

Angled Mini Conical Abutment CM

CM Mini Conical Abutment and WS and CM Micro Abutment

Universal Post CM and WS

Universal Post Througt Bolt and Angled


Cylinders

Conical Abutment II Plus

Mini Abutment II Plus

Universal Post II Plus

Angled Post II Plus

UCLA II Plus


Cylinders

EXTERNALHEX

INTERNALHEX

TRANSGINGIVAL

MORSETAPER

Cylinders

0.9 1.2 1.6 4.1Conical

GT

CONNECTIONSANDTORQUES

SELECTIONOFPROSTHETICCOMPONENTSACCORDINGTOTHEABUTMENT/IMPLANTINTERFACE

MultipleProsthesis

MultipleProsthesis

A.Overdentureabutment B.Directlyontheimplant

Workingmanner

MultipleProsthesis

MultipleProsthesis

SingleProthesis

SingleProthesis

SingleProthesis

SingleProthesis

TypeofProsthesis

1. Screw retained

2. Cemented

•Mini Conical Abutment•Transepithelial Abutment•Micro abutment

•Conical Abutment•CM Abutment

•Universal Post •Universal Post •Personalizable Post

•Universal Post •Personalizable Post

•UCLA

•UCLA

18

HeightoftheCMAngledProstheticComponents

AngledUniversalPost

ø4.5ø3.3

AngledMiniConicalAbutment

30º

17º

30º

5.8

0

4.5

05

.20

4.9

0

4.8

0

3.5

04

.20

3.9

0

3.8

0

2.5

03

.20

2.9

0

3.5

0

3.5

03

.50

3.5

0

4.9

0

3.5

0

5.9

0

3.5

0

2.5

0

2.5

02

.50

2.5

0

3.9

0

2.5

0 4.9

0

2.5

0

1.5

0

1.5

01

.50

1.5

0

2.9

0

1.5

0 3.9

0

1.5

0

19

RESPECTING YOUR WORK:

CYLINDERS FOR OVERCASTING

The cylinders and UCLAs for overcasting present

with perfect adaption and perfect fitting,

following international quality regulations and

standards. The dimensional tolerance between

implants, intermediates and manufactured belts,

as well as the individual analysis of each piece,

are the differences of these components that

pass through strict industrial quality control at a

micrometric level.

All of these products are manufactured using the

latest equipment, ensuring the best adaption.

Castable polymers sleeves fitted over the

metal bases are replaced with metal after the

overcasting process, thus the pre-fabricated

metalic base has a higher fusion temperature

than the metal to be overcast. Such polymers

facilitate the finishing process of the parts and

ensure the overlapping of the overcast metal to

the pre-manufactured metal. However, the casting

process does not follow the same quality control

that the manufacturing process does, therefore,

the dental technician should often check for

the absence of positive metallic porosities in the

screw passage tube. Therefore, the overcasting

technique maintains the quality of the fittings

among the guaranteed parts from the factory and

enables the design and individualisation of the

infrastructure, to allow additional material on the

manufactured base to hold its shape.

The use of these products should be carried

out in accordance with the handling instructions

as described in the manual, as well as in the

instructions provided by the various manufacturers

of overcasting alloys. Thus, the oral rehabilitation

team can ensure success for the technique more

safely. For best results, always use the entire

sequence of Neodent® products (analogues,

abutments, screws, transfer copings, and protectors).

Believing in the importance of allowing the

customer to choose the product, we offer different

metallic alloy cylinders with pre-fabricated belts

bases for overcasting.

They are:

− Cobalt-Chromium;

− Tilite;

− Gold (Gold Alloy);

− Zirconia.

NE

OD

EN

T

20

NE

OD

EN

T

HANDLING OF

CYLINDERS FOR OVERCASTING

Regardless of the type of alloy chosen, the

dental technician should take special care when

handling the pre-fabricated cylinders, thus

improving the quality of the overcasting and the

ceramic application processes.

1. Waxing:

The edges waxing of the component cannot

overrun the borders that come into contact with

the implant or the prosthetic component (metallic

base of cylinder), guaranteed to preserve and

adapt the industrial quality control process.

2. Overcasting:

The prosthetic cylinders are made non-sterile

and are suitable for single use. The metal bases

are manufactured with alloys that have a high

fusion temperature compared to the metal that

is to be overcast. In cases where the metal for

overcasting has a higher fusion temperature than

the manufactured parts, they will deform due

to high temperatures. However, if the metal due

to be overcast has a fusion temperature much

lower than the metal in the base, bonding may

occur between the parts and the base of the

component, which could result in the release of

the infrastructure.

All the cylinders with pre-fabricated bases are

evaluated one by one, from the reception of the

raw material, which is analysed before production,

to its final packaging, ensuring quality throughout

the entire manufacturing process.

3. Finishing and metal polishing:

The disembedding of the casted object at

the coating must be done carefully, avoiding

abrasive jets blasts, which may alter the pre-

fabricated surface.

It is recommended to machining the final

infrastructure at a low rotation with the use

of refrigeration, with specific drills for metal.

Both of the areas corresponding to the stop of

the head of the prosthetic screws inside the

passing tube must maintain their full original

shape, without the presence of positive metal

porosities or deformations.

The edges of the cylinders must be covered by

polishing protectors during the polishing and

the finishing of the infrastructure. Corrosive

materials, such as those with iron particles,

should also not be used.

Very strict criteria should be applied, because

flaws in overcasting procedure may cause the

loss of the entire work.

4. Ceramic application:

The porcelain choice should correspond

to the used alloy (CoCr, Tilite or Gold). The

ceramic cannot be applied directly over the

manufactured bases of the cylinder, so that the

waxing and the overcasting ensure a complete

covering of the infrastructure area in which the

ceramic is to be applied.

21

NE

OD

EN

T

COBALT-CHROMIUMPRODUCTS LINE (CoCr)

The cylinders for overcasting with pre-

fabricated bases of Cobalt-Chromium (CoCr),

have a high resistance to water corrosion and

elevated mechanical resistance to withstand

occlusal loads. This is an alloy that has a high

biocompatibility and is easy to use by the

technician, with an excellent acceptance of

ceramic application for CoCr. In addition, this alloy

is compatible with one of the strongest trends in

healthcare worldwide in its absence of Nickel in

its chemical composition, resulting in lower risks

of allergenic reactions when in contact with living

tissues, such as the oral mucosa.

Several cylinders and UCLAs are available in this

alloy, and from the customised infrastructures

of the Neoshape line. Note the options and

mechanical characteristics (rotational or anti-

rotational) for each case, as well as the sequence

of products found in this catalogue.

ThechemicalcompositionofthehighfusionCoCralloy

followsisinaccordancetotheinternationalregulation

ASTMF-1537,byfollowingthischemicalcomposition:

Importantinformation:

•Melting range: 1.287 to 1.378°C (2.348 to 2.512 °F);

• Density: 8,28 g/cm³;

• Coefficient of thermal expansion: 14,2µm/K

(600°C).

An alloy compatible for the overcasting procedure

that is in accordance with regulations ASTM F1537,

ASTM F799, ISO 5832-12 or ISO 5832-4 should be

chosen.

The thickness of the metal after overcasting must

be at least 0.5 mm, and can be reduced during

manufacturing and finishing by up to 0.3 mm.

Welding must be done in the range of 1.120 to

1.150°C (2.048 to 2.102 °F)

CHEMICAL ELEMENT Composition (%)

Cobalt 58to69

Chrome 26to30

Molybdenum 5to7

Max.Nitrogen 0,25

Max.Carbon 0,14

22

NE

OD

EN

T

TILITE LINE

The cylinders for overcasting with pre-fabricated

bases in Tilite must always be overcast with

Tilite alloys (Talladium, Curitiba, Brazil). The Tilite

metallic alloys are alloys with a highly resistant

NiCr base. The pre-fabricated base has a high

fusion temperature, accepting only the Tilite

alloys for overcasting. Depending on the ceramic

used by the dental technician, they must select

which Tilite alloy is to be made in overcasting,

according to the table below:

Several cylinders and UCLAs are available in

this alloy. Note the options and mechanical

characteristics (rotational or anti-rotational) for

each case, as well as the sequence of products

found in this catalogue.


•Melting range: 1.204 to 1.302°C (2.200 to

2.375 °F);

•Density: 7,7 g/cm³;

•Coefficient of thermal expansion: varies

according to the Tilite league selected;

•Welding must be done in the range of

1.050 to 1.110°C (1.922 to 2.030 °F).

Moreinformationcanbefoundinthis

article:SARTORI,IAM;VELOSO,R.Neodent

andTalladium:CastingoftheTilite

manufacturedcomponents.ImplantNews,

no.5,vol.2,Sept/Oct2005.

CHEMICALELEMENT Composition(%)

Níckel 60to76

Chrome 12to21

Molybdenum 4to14

Titanium 4to6

TILITE ALLOY CERAMIC

Carmen,CeramaxCeramco,CeramcoII,CeramcoIII,C-Mix,Duceram,DuceramKiss,Elephant,Excelco,Excelsior,Finesse,Fortune,GCInitialMC,Illusion,IPSInLine,Jelenko,LifeEssence,Micro-Bond,Microlucent,OlympicII,Pencraft,Reflex,Silhouette,Solera,Tru-Est,Vintage-Halo,Vision,Willians/Wilceram

BMK,Creation,DuceramPlus,Elite,HeraCeram,SymbioCeram,Vintage-Regular,VitaOmega900,VM13,VMK-68,VMK-68N

Avante,CeramcoIISilver,NoritakeEX-3,Spectrum,Starlight,Synspar

IPSClasic,IPSd.Sign,Vita,OmegaVMK-95

Luminesse

Premium(P)

Vita(V)

Star(S)

Omega(Ω)

PMF

23

NE

OD

EN

T

GOLD LINE

Among the metallic alloys, the cylinders for

overcasting with pre-fabricated bases in gold are to

be the first choice for the construction of prosthetic

infrastructures on dental implants. Of all of the

existing metallic alloys for the manufacture of

dental prosthesis, none were better than the gold

alloys in relation to intraoral survival time due to

their following characteristics:

• Excellent biocompatibility: no cytotoxic potential

(extraction test ISO 10993-5) or allergenic reaction

(ISO 10993-10 maximized);

• Extremely low levels of corrosion (according to

regulation ISO/DIS 10271);

• Excellent mechanical properties;

• Reduction of friction coefficient between parts;

• Increased pre-load of the prosthetic screw.

From a technical point of view, this is an alloy

of easy handling for the DENTAL TECHNICIAN,

since it has an optimal hardness, low capacity for

deformation and a white colouring, which makes

aesthetics easier. Its high fusion temperature

permits overcasting with gold and semi-gold alloys

and results in complete safety for the ceramic

application.

Cylinders on mini abutments and UCLAs are

available in this alloy.


• Melting range: 1.400 to 1.490°C (2.552 to 2.714 °F);

• Density: 17,5 g/cm³;• Coefficient of thermal expansion: 12,2µm/K (600°C).

The alloys must be chosen to be compatible

with the overcasting procedure (gold or semi-

gold) that are in accordance with regulation

ISO 9693 and ISO 22674.

The thickness of the metal after overcasting

should be at least 0.5 mm.

Welding must be done in the range of 800 to

890°C (1.472 to 1.634 °F).

Thegoldalloywithahighmeltinghasthefollowingchemicalcomposition:

CHEMICALELEMENT Composition(%)

Gold 60

Palladium 20

Platinum 19

Iridium 1

24

NE

OD

EN

T

ALUMINA LINE

In line with global aesthetic trends, the following

cylinders are available for the sequence of

Universal Posts made of Aluminium Oxide: The

Alumina line, indicated to cemented unitary

prostheses without metal, have the following

characteristics:

• Superior aesthetics and excellent

biocompatibility;

• Absence of metallic margin;

• Best translucency;

• Security on marginal adaptation;

• Effective Mechanical properties;

• No possibility of thermal conductivity or

oxidation;

• Excellent cost/ benefit;

• Technical procedures widely known by the

DENTAL TECHNICIANS.

Note the sequence of procedures for utilization of

this product found in this catalogue.

Aluminized feldspatic ceramics are suitable for

the application of these Alumina cylinders. Some

situations require the customisation of the cylinder

in order to avoid the excess of unsupported

feldspar ceramics, as following the manufacturer’s

instructions of the ceramics. For this, the DENTAL

TECHNICIAN must use aluminized ceramics of

margin or reconstruction, fabricating the final

infrastructure before the application of the porcelain.

25

NE

OD

EN

T

ZIRCONIA PRODUCTS LINE (Y-TZP)

Zirconium (Zr) is the basic chemical element of

Zirconia line. In accordance with the periodic

table, this is a transition metal and has many

interesting features, such as high mechanical

and corrosion resistance. From this element, is

obtained Zirconium Dioxide (ZrO2), better known

as Zirconia.

Zirconia has white colour and a crystalline

monocyclic structure. The addition of Yttrium

Oxide (Y2O3) in its composition results in the

formation of a tetragonal crystal (TPZ), which,

from a mechanical point of view, is very important

because it inhibits the propagation of cracks, a

fact commonly noted in ceramics in general.

With the scientific name of Tetragonal Zirconium

Oxide Polycrystal, stabilized with dense Yttrium

highly pure (Y-TZP), the Zirconia line is compliant

with regulation NBR ISO 13356. It has the

following characteristics:

•Biocompatibility;

•White colouring;

•High resistance to corrosion;

•Limits the formation of cracks;

•High fracture tenacity.

Today, there are few industries that have the

technology to process Zirconia. Therefore, after

intensive research, we can offer our clients a

line of UCLAs, Universal and Anatomical Posts,

as well as customizable infrastructures with our

Neoshape line. Not the sequence of this product

found in this catalogue.


•Density: 5,3 g/cm³;

•Flexural resistance: ≥ 1700 MPa.

Special care must be taken when handling

Zirconium. The Posts, UCLAs, and infrastructures

should not be subjected to the sterilisation,

which may result in the loss of their mechanical

properties. Moreover, some precautions should be

taken during the preparation:

•The use of fine grained diamond drills;

•Sufficient refrigeration;

•Finishing with specific rubber rotatory

instruments to avoid micro-cracks.

Porcelains specific for Zirconia must be chosen for

application. Note that in some cases the UCLAs

may need the infrastructure in order to increase

the ceramic volume supported in function of

the distance of the antagonist and proximal

dental elements. The Universal Posts must have

infrastructures, whether customizable with

Neoshape system, or over aluminium cylinders.

26

NE

OD

EN

T

CASTABLE PRODUCTS LINE

A product line that gives to DENTAL TECHNICIAN

complete freedom to cast the infrastructure with

a metallic alloy of their choice, directly over the

implant platform or abutment. Often, price is

the decisive factor in this choice. Therefore, the

adaptation quality to the implant primarily depends

on the care in handling by the professional,

providing quality assurance of prosthetic

components with pre-fabricated metallic base.

After casting, we suggest that you always evaluate

the adaptation of the analogues prior to cementing

the crown.

The castable components are available for all

cylinders on intermediary, Universal Posts and

UCLAs. Note the sequence of this product found in

this catalogue.

27

NE

OD

EN

T

TITANIUM LINE

Among the more traditional alloy in implantology,

there is the Titanium, conforming to regulation

ASTM F136- Ti6Al4V. Known as Titanium grade V,

it is widely used in the manufacture of provisional

prosthesis. The dentist or the DPT can adapt resin

crowns pre-fabricated over the cylinders and can

create temporary crowns with perfect fitting and

security, or even create a temporary crown directly

over the cylinders, which can be used in immediate

loading situations. The prosthetic components in

Titanium are provided sterile, guaranteeing security

and strengthening our ethical commitment with

you. Pre-fabricated components in Titanium must

not be overcasted. Although Titanium has a high

fusion temperature (approx 1680 ºC), the alloy

undergoes structural changes when subjected to

high temperatures. Therefore, metallic alloys with

Titanium base still remain a challenge to the science

of dental material.

The Titanium prosthetic components are offered as

cylinders for all intermediates and implants, also as

customized infrastructures with the Neoshape line.

Note the mechanical characteristics (rotational or

anti-rotational) of each case and the sequence of

products found in this catalogue.

28

M o r s e T a p e r

29

•GAPreduced(impermeablefitting);

•StableAnti-rotationalfixing;

•Highmechanicalstrength;

•Uniqueprostheticinterface,independentoftheimplantdiameter;

•FirstsystemwithConemorsefittinginBrazil;

•TheCMangleandtheinternalthicknessoftheimplantenable

thedesignofthescrewthreadtoreachthecervicalportionofthe

implant;

•Highresistance,comparabletoimplantswithexternalhexwith

regularplatform;

•NeoPorosSurface.

•CM Angled Universal Post 17° and 30°

•CM Universal Post Throug Bolt •CM Universal Post (unique

body)•Anatomical and Universal

Zirconia Post

•CM Mini Ball Attachment•Clip Bar•CM Mini Abutment•CM Micro Abutment

•CM Micro Abutment •CM Mini Abutment •Angled Mini Conical Abutment

17° and 30° •Cylinder and Distal Bar

Passive Fitting Technique•Cylinder - Castable Mini Abutment •Cylinder - Titanium Mini Abutment •Cylinder - Brass Mini Abutment

•WS Abutment (single)•Mini Abutment WS(multiple)•CM TransepithelialAbutment (multiple)

•CM Abutment (single) •Mini Abutment CM

(multiple)•Angled Mini Abutment CM

17º and 30º (multiple)Micro Abutment CM

(multiple)

• WS Universal Post with Screw

•Mini Abutment WS

Passive Fitting Technique• Castable GT Cylinder• Titanium GT Cylinder• Brass GT Cylinder

CONEMORSEIMPLANT

WSCONEMORSECMZYGOMATIC

3.5, 3.75, 4.0,4.3 e 5.0 mm

4.0, 5.0 e 6.0 mm

ScrewretainedProsthesis

CementedProsthesis Overdenture Protocol

ø2.5mm

Ø3.0mm

ØImplant

ØImplant

MORSETAPER

30

Imp

lan

ts

•Cylindrical implant with Morse Taper interface;

•NeoPoros Surface;

•Pre-mounted;

•Double thread (faster installation and less trauma);

•High cutting capacity;

•Suitable for bones type I and II;

•Cover screw not included;

•Unique prosthetic interface for all implant diameters;

•Cervical diameter equal to implant diameter;

•Observe the specific Pilot Drill (same function of countersink drill);

•Better prosthetic resolution with CM Implant inserted 2mm

intraosseous,below the crest level;

•Perforation rotation: 800-1200 rpm;

•Insertion rotation: 30 rpm.

3.5mm

3.75mm

4.0mm

5.0mm

ProductCharacteristics

Optional

Init

ial

Dri

ll

Tita

max

Dri

ll 2

.0

Pil

ot

2/3

Tita

max

Dri

ll 2

.8

Tita

max

Dri

ll 3

.0

Tita

max

Dri

ll 3

.15

CM

Pil

ot

2.8

/3.5

Tita

max

Dri

ll 3

.3

CM

Pil

ot

3/3

.75

CM

Pil

ot

3.3

/4.0

Tita

max

Dri

ll 3

.8

Tita

max

Dri

ll 4

.3

CM

Pil

ot

4.3

/5.0

DrillSequence

31

Ø 5.0

Ø 4.0

7.0 mm 8.0 mm 9.0 mm 11.0 mm 13.0 mm 15.0 mm 17.0 mm

109.556 109.557 109.558 109.559 109.560 109.561 109.562

109.544

109.529

109.545

109.530

109.546

109.531

109.547

109.532

109.548

109.533

109.549 109.550

109.509 109.510 109.511 109.512 109.513 109.514 109.515

Ø 3.5

Ø 3.75

CMCoverScrew

117.013 117.017

2 mm

Healings

Ø 3.3

Ø 4.5

5.5 mm4.5 mm3.5 mm2.5 mm1.5 mm0.8 mm 6.5 mm

106.182 106.168 106.169 106.170 106.183 106.184 106.185

106.175 106.171 106.172 106.173 106.174 106.180 106.181

32

Imp

lan

ts

Optional

3.5mm

3.75mm

4.0mm

• Cylindrical implant with Morse Taper interface;

• NeoPoros Surface;

• Pre-mounted;

• Double thread (faster installation and less trauma);

• High compaction capacity (bone expansion);

• Suitable for bones type III and IV and in areas with little bone thickness ;

• Cover screw not included;

• Unique prosthetic interface for all implant diameters;

• Cervical diameter equal to implant diameter;

• Simplified instrumentation in the prepare of surgical alveolus;

• Best prosthetic resolution with CM Implant 2mm infraosseous;

• Perforation rotation: 800-1200 rpm;

• Insertion rotation: 30 rpm;


Init

ial

Dri

ll

Tita

max

Dri

ll 2

.0

Pil

ot

2/3

Tita

max

Dri

ll 2

.8

Tita

max

Dri

ll 3

.0

CM

Pil

ot

2.8

/3.5

Tita

max

Dri

ll 3

.3

CM

Pil

ot

3/3

.75

CM

Pil

ot

3.3

/4.0

Tita

max

Dri

ll 3

.8

Tita

max

Dri

ll 4

.3

CM

Pil

ot

4.3

/5.0

Drillsequence

Morse Taper

33

Ø 4.0

9.0 mm 11.0 mm 13.0 mm 15.0 mm 17.0 mm 19.0 mm

Ø 3.5

Ø 3.75

109.563 109.564 109.565 109.566 109.567

109.568 109.569 109.570 109.571 109.572 109.573

109.516 109.517 109.518 109.519 109.520 109.521

117.013 117.017

2 mm

Ø 3.3

Ø 4.5

5.5 mm4.5 mm3.5 mm2.5 mm1.5 mm0.8 mm 6.5 mm

106.182 106.168 106.169 106.170 106.183 106.184 106.185

106.175 106.171 106.172 106.173 106.174 106.180 106.181

CMCoverScrew

Healings

Mo

rs

e T

ap

er

34

Imp

lan

ts


•Cylindrical implant with Morse Taper interface;


• Pre-mounted;



• Suitable for bones type III and IV;



• Observe the specific Pilot Drill (same function of countersink drill);





3.75mm

4.0mm

Optional

Drillsequence

Init

ial

Dri

ll

Tita

max

Dri

ll 2

.0

Pil

ot

2/3

Tita

max

Dri

ll 2

.8

Tita

max

Dri

ll 3

.0

CM

Pil

ot

2.8

/3.5

Tita

max

Dri

ll 3

.3

CM

Pil

ot

3/3

.75

CM

Pil

ot

3.3

/4.0

Tita

max

Dri

ll 3

.8

Tita

max

Dri

ll 4

.3

CM

Pil

ot

4.3

/5.0

35

Ø 4.0

9.0 mm 11.0 mm 13.0 mm 15.0 mm 17.0 mm

Ø 3.75

109.594

109.599

109.595

109.600

109.596

109.601

109.597

109.602

109.598

109.603

117.013 117.017

2 mm

Ø 3.3

Ø 4.5

5.5 mm4.5 mm3.5 mm2.5 mm1.5 mm0.8 mm 6.5 mm

106.182 106.168 106.169 106.170 106.183 106.184 106.185

106.175 106.171 106.172 106.173 106.174 106.180 106.181

CMCoverScrew

Healings

36

Imp

lan

ts


• Conical implant with Morse Taper interface;


• Pre-mounted;


• Suitable for bones type III and IV and pos-extracting installation;



• Observe the specific Pilot Drill (same function of countersink drill);





3.5mm

4.3mm

5.0mm

Optional

Drillsequence

Init

ial

Dri

ll

Alv

im D

rill

2.0

Alv

im D

rill

3.5

CM

Pil

ot

2.8

/3.5

Alv

im D

rill

4.3

CM

Pil

ot

3.6

/4.3

Alv

im D

rill

5.0

CM

Pil

ot

4.3

/5.0

37

8.0 mm 10.0 mm 11.5 mm 13.0 mm 16.0 mm

Ø 3.5

Ø 4.3

Ø 5.0

109.551 109.552 109.553 109.554 109.555

109.534 109.535 109.536 109.537 109.538

109.539 109.540 109.541 109.542 109.543

117.013 117.017

2 mm

Ø 3.3

Ø 4.5

5.5 mm4.5 mm3.5 mm2.5 mm1.5 mm0.8 mm 6.5 mm

106.182 106.168 106.169 106.170 106.183 106.184 106.185

106.175 106.171 106.172 106.173 106.174 106.180 106.181

CMCoverscrew

Healings

38

Imp

lan

ts

5.0mm

4.0mm

6.0mm

Optionalforthe"M"Implant


• Cylindrical implant with Morse Taper interface;


• Pre-mounted;


• Optimization of primary stability;

• Excellent alternative to posterior edentulous lower jaw;

• Specific Surgical Kit;

• Observe the specific Pilot Drill (same function of

countersink drill);

• In "M" Titamax WS Implant, the pilot drill is optional;



• Unique Morse Taper prosthetic interface (same dimensions

as CM Zygomatic Implants).

Morse Taper

Drillsequence

Init

ial

Dri

ll

Tita

max

Dri

ll 2

.0

Pil

ot

2/3

Tita

max

Dri

ll 2

.8

Tita

max

Dri

ll 3

.0

CM

Pil

ot

2.8

/3.5

Tita

max

Dri

ll 3

.3

CM

Pil

ot

3/3

.75

CM

Pil

ot

3.3

/4.0

Tita

max

Dri

ll 3

.8

CM

Pil

ot

3.8

/4.3

Tita

max

Dri

ll 4

.3

CM

Pil

ot

4.3

/5.0

CM

Pil

ot

4.3

/5.3

Tita

max

Dri

ll 5

.3

CM

Pil

ot

5.3

/6.0

39

5.0 mm 6.0 mm

Ø 4.0

Ø 5.0

Ø 6.0

109.604

109.574

109.605

109.575

109.576 109.577

117.016

WS

3.5 mm2.5 mm1.5 mm0.8 mm

106.186 106.187 106.188 106.189

5.0 mm 6.0 mm

Ø 5.0

Ø 6.0

109.578 109.579

109.580 109.581

Mo

rs

e T

ap

er

CMCoverscrew

Healings

40

Pro

ste

tic

s C

om

po

ne

nts Demonstrativesequenceof

MorseTaper

CMAbutmentandWSAbutment

CM Abutment WS Abutment

Torque Connection 1.6 mm

Prosthetic Torque Ratchet Driver

GT Open Tray Transfer

GT Transfer

GT Analogue

GT Protective Cylinder

GT Cylinder

Tili

te /

Co

Cr

Titanium

Castable

Torque Connection 1.2mm


32N.cm

• Same prosthetic sequence as the GT Implant;

• Available in Titanium;

• Minimum interocclusal space of 5.0mm from the mucosa level;

• Conicity 15°;

• Single screw retained prosthesis (anti-rotational);

• The cylinders come with Neotorque screw, except the

castables, that comes with Titanium screw.

41

Dem

onstrativesequenceof

CMAbutm

entand

WSAbutm

ent

123.012

GTPolishingProtector

106.102

GTProtectionCylinder

108.039

Open tray

Closed tray

108.040

101.037

GTTransfer

GTAnalogue

GTCylinderScrew

Titanium Neotorque

116.038 116.228

Castable

Anti-rotational

Titanium Tilite CoCr

GTCylinder

0.8mm

0.8mm

1.5mm

1.5mm

2.5mm

2.5mm

3.5mm

3.5mm

4.5mm 5.5mm 6.5mm

CMAbutment

WSAbutment

115.162

115.180

115.147

115.181

115.148

115.182

115.152

115.183

115.163 115.164 115.165

118.180 118.179 118.242118.176

•Observe corresponding sequence and indicated torque;• Use Torque connection 1.6 mm (105.006); • To torque control, use Prosthetic Torque Ratchet Driver (104.026).

• Available: -Titanium: for provisional prosthesis; -Tilite and CoCr: overcastting; -Castable: casting.• With screw;• To screw torque, use Torque Connection 1.2mm (105.005);• Observe indicated torque;• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

• Available in Titanium;• Replica of implant platform or prosthetic component;

• For prosthesis construction or prosthetic planning.

• Available in Titanium;• Used to protect the component during the prosthesis construction;

• To installation, use Digital Driver 1.2mm (104.007).

• For transference and impression of prosthesis;• Available in Titanium;• For open tray or closed tray technique;• Anti-rotational.

• Protector for cylinders during polishing and finishing of prosthesis;

• Use the corresponding screw to the cylinder for fixation.

MorseTaper

42

•Available in Titanium;

• Minimum interocclusal space of 4.4mm from the

mucosa level;

• Multiple and screw retained prosthesis;

• Conicality 20°;



Pro

sth

eti

cs

Co

mp

on

en

ts Demonstrativesequenceof

CMMiniAbutmentandWSMiniAbutment

WS Mini

Conical Abutment

CM Mini Conical

Abutment

Angled CM Mini Conical

Abutment (17° and 30°)

Connection to Conical Torque

4.1 mm


4.1 mm

Connection to Torque 0.9 mm

Mini Conical Abutment Transfer

Mini Conical Abutment Analogue

Protective Cylinder of Mini Conical Abutment

Mini Conical Abutment Cylinder

Tili

te /

Go

ld /

Co

Cr

Titanium

Castable


Prosthetic Torque Rachet Driver


32N.cm

32N.cm

15N.cm

MorseTaper

43

Dem


CMMiniAbutm

entand

WSMiniAbutm

ent

115.154

115.176

115.149

115.177

115.16617º

115.16930º

115.150

115.178

115.167

115.170

115.151

115.179

115.168

115.171

115.153 115.160 115.161

AnalogueofMiniConicalAbutment

Castable Titanium Tilite Gold CoCr CoCrfor weld

116.036

106.227116.037

0.8mm

0.8mm

1.5mm

1.5mm

1.5mm

2.5mm

2.5mm

2.5mm

3.5mm

3.5mm

3.5mm

4.5mm 5.5mm 6.5mm

CMMiniConicalAbutment

WSMiniConicalAbutment

AngledCMMiniConicalAbutment

•Observe corresponding sequence and indicated torque;•Observe indicated Torque Connection;•To control torque, use Prosthetic Torque Ratchet Driver (104.026);•Check the measurement of angled components in Catalog.

•Check measurements in “Technical Guidance”, on page 14.

CylinderofCM

MiniConicalAbutment

•Available in: -Titanium: provisional prosthesis; -Tilite and CoCr: overcastting; -Castable: casting; -Gold: gold alloy with high melting range. •Rotational for screwed retained multiple elements;•With screw;•To screw torque, use Torque Connection 1.2mm (105.009)•Observe indicated torque;•To torque control, use Prosthetic Torque Ratchet Driver (104.026).

118.112ø4.1

ø4.1

ø4.1

ø4.1

ø4.1

ø4.1

118.113 118.146 118.206 118.209 118.210

106.054

ProtectiveCylinderofMiniConicalAbutment

108.022108.021 108.068

101.020

TransferofMiniConicalAbutment

Open-tray Closed-tray

Short screw

Multifunctional

CylinderScrew

Titanium Neotorque

•Available in Titanium;•Replica of prosthetic component;•For prosthesis construction or prosthetic planning.

•Available in Titanium;•Used to protect the component during the prosthesis construction;•To installation, use Digital Driver 1.2mm (104.007).

•Available in Titanium;•Component with molding function by prosthesis construction;•For open tray or closed tray technique;•Rotational.

123.008

PolishmentProtector

•Protector for cylinders during polishing and finishing of prosthesis;•Use the corresponding screw to the cylinder for fixation.

MorseTaper

44


CoCr

Titanium

CM Micro Conical Abutment





Protective Cylinder of

Mini Conical Abutment



32N.cm

Pro

sth

eti

cs

Co

mp

on

en

ts DemonstrativeSequenceof

CMMicroAbutment


•Multiple and screwed prosthesis;

•Indicated to CM Implants with diameter of 3.5mm

and close to each other;

•Minimum interocclusal space of 4.4mm from the

mucosa level;

•The cylinders come with Neotorque screw, except

the castables, that comes with Titanium screw.

MorseTaper

45

Dem

onstrativeSequenceof

MorseTaper

CMMicroAbutm

ent

OpenTrayTransferofMicroConicalAbutment

118.246

Titanium

118.245 118.247

CoCr Castable

115.200 115.201 115.202

1.5mm 2.5mm 3.5mm

CMMicroConicalAbutment

• Observe sequence and torque;• To torque, use Conical Torque Connection 4.1mm (105.009);• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

MicroConicalAbutmentCylinder

•Available in: -Titanium: provisional prosthesis; -CoCr: overcastting; -Castable: casting.•Rotational for screwed multiple elements;•With screw;•To screw torque, use Torque Connection 1.2mm (105.009)•Observe indicated torque;•To torque control, use Prosthetic Torque Ratchet Driver (104.026).

106.227116.037

ø4.1 106.199

ProtectiveCylinderofCMMicroAbutment

CylinderScrew

Titanium Neotorque



MicroConicalAbutmentAnalogue

108.070

101.057 Rotational

•Available in Titanium;•Replica of prosthetic component; •For prosthesis construction or prosthetic planning. •Available in Titanium;

•Component with molding function by prosthesis construction;•For open tray technique;•Rotational.

46

CM Implant Transfer

Analogue of CM Implant



Optional SequenceIndicated Sequence

CM Anatomic Post

Customization

ConventionalMolding

LaboratorialPhase

Laboratorial Phase

Prosthesis Conclusion



CM AnatomicPost

15N.cm

15N.cm

Pro

sth

eti

cs

Co

mp

on

en

ts

DemonstrativeSequenceof

CMAnatomicPost

•Available in Zirconia, according to

ASTM ISO 13.356;

•Cemented unitary prosthesis;

•Possible customization;

•Indicated for aesthetic area.

MorseTaper

47

1.5mm 2.5mm 3.5mm

CMLateralAnatomicPost

114.332Zirconia 114.333 114.334

CMImplantTransfer

108.041 108.065

ShortLong

• Available in Titanium;• Component with molding function by prosthesis construction;

• For closed tray technique.

CMImplantAnalogue

101.053

•Available in Titanium;•Replica of prosthetic interface;•For prosthesis construction or prosthetic planning.

1.5mm 2.5mm 3.5mm

CMAnatomicPost

•To installation, use Torque Connection 0.9mm (105.065);•Observe indicated torque;•To torque control, use Prosthetic Torque Ratchet Driver (104.026).

•Available in Zirconia;•Cemented prosthesis;•To installation, use Torque Connection 1.2mm (105.005);•Observe indicated torque;•To torque control, use Prosthetic Torque Ratchet Driver (104.026).

114.321Zirconia 114.322 114.323

Dem


MorseTaper

CMAnatomicPost

48

Torque

Connection 1.2mm


CM Post Transfer

CM Post

Analogue

Universal

Post Cylinder

ø 3.3

ø 3.3

ø 3.3

ø 4.5

ø 4.5

ø 4.5

Aluminium

Aluminium

Temporary

Temporary

Castable

Castable

32N.cm

ø3.3 x 4 ø3.3 x 6 ø4.5 x 6

Pro

sth

eti

cs

Co

mp

on

en

ts

•Cemented prosthesis;

•Straight Universal Post in Titanium body;

ø4.5 x 4


CMUniversalPostMorseTaper

49

114.129 114.077 114.078 114.079 114.136 114.137

114.130 114.086 114.087 114.088 114.139 114.140

114.131 114.080 114.081 114.082 114.142 114.143

114.132 114.083 114.084 114.085 114.145 114.146

114.138

114.141

114.144

114.147

UniversalPostTransfer

UniversalPostSetUniversalPostAnalogue

118.186

108.042

108.060101.038

118.181 118.192

118.188

108.044

108.062101.040

118.183 118.194

118.187

108.043

108.061101.039

118.182 118.193

118.189

108.045

108.063101.041

118.184 118.195

TemporaryAluminum Castable

UniversalPostCylinder

0.8mm

ø 3.3

ø 3.3

ø 3.3

ø 3.3

ø 3.3

ø 3.3 ø 3.3

ø 3.3

ø 3.3

ø 3.3 ø 3.3

ø 3.3

ø 3.3

ø 3.3

ø 4.5

ø 4.5

ø 4.5

ø 4.5

ø 4.5

ø 4.5

ø 4.5 ø 4.5

ø 4.5

ø 4.5

ø 4.5 ø 4.5

ø 4.5

ø 4.5

4mm

4 mm

4 mm

4mm

4 mm

4 mm

4 mm

6 mm

6mm

6mm

6mm

6mm

6mm

6mm

1.5mm

1.5mm

2.5mm

2.5mm

3.5mm

3.5mm

4.5mm 5.5mm 6.5mm

CMUniversalPostinTitanium

AngledCMUniversalPostinTitanium

• Available in Titanium;• Observe indicated torque and connection;• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

• Available in: -Titanium: provisional prosthesis; -Alumina: for “metal free” prosthesis; -Castable: casting.• Cemented prosthesis;• Compatible with all Universal Posts, if not prepared.

• Available in polymer;• Component with molding function by prosthesis construction;

• For closed tray technique;• Anti-rotational;• Select transfer according to the component to be molded, as prosthetic planning.

• Available in Titanium;• Replica of prosthetic component platform;• For prosthesis construction and prosthetic planning.

• Components Kit of Universal Post line, containing the Transfer and Provisional / Castable Cylinders.

114.095

114.101

114.107 114.108 114.109

114.110 114.111 114.112

114.102 114.103

114.104 114.105 114.106

114.096 114.097

114.098 114.099 114.100

114.089 114.090 114.091

114.092 114.093 114.094

17º

30º

•See measurements in “Technical Guidance”.

Dem


CMUniversalPost

MorseTaper

50

Transfer of WS Implant

Transfer of Short CM Implant

CM Implant

Analogue

WS Implant

Analogue



CM Universal Post Through Bolt

Torque Connection

1.2mm

WS Post

Pro

sth

eti

cs

Co

mp

on

en

ts

Transfer of Long CM Implant

32N.cm

15N.cm


•Cemented unitary prosthesis;

•Need of Transfer Guide in acrylic resin

•Indicated for laboratorial customization.


MorseTaper

CMUniversalPostThroughBolt

51

Dem


MorseTaper

CMUniversal

PostThroughBolt

WSUniversalPost

114.183 114.184 114.185 114.186

114.187 114.188 114.189 114.190

0.8mm

ø4.5

4mm

6mm

1.5mm 2.5mm 3.5mm

• Available in Titanium;• Component with molding function by prosthesis construction;

• For closed tray technique.

114.293 114.294 114.295

114.300 114.301 114.302

114.286 114.287 114.288

114.289 114.290 114.291

ZirconiaUniversalPostThroughBolt

ø3.3

ø3.3

ø4.5

ø4.5

4mm

6mm

1.5mm 2.5mm 3.5mm

•Available in Zirconia; •Component with through bolt; •Cemented prosthesis; •Use a Torque Connector of 0.9 mm (105.006); for installation;

•Observe indicated torque; •Available in two heights 4mm and 6mm.

CMImplantTransfer

108.041 108.065 108.064

ShortLong WS

101.053 101.055

CM WS

Analogue

• Available in Titanium;• Replica of prosthetic interface;• For prosthetic planning.

114.148 114.149 114.150 114.151 114.152 114.153

114.155 114.156 114.157 114.158 114.159 114.160

114.115 114.117 114.118 114.119 114.162 114.163

114.116 114.120 114.121 114.122 114.165 114.166

114.164

114.167

114.154

114.161

CMUniversalPostThroughBolt

0.8mm

ø3.3

ø3.3

ø4.5

ø4.5

4mm

6mm

1.5mm 2.5mm 3.5mm 4.5mm 5.5mm 6.5mm

• Available in Titanium;• Component with through bolt;• Cemented prosthesis;• To installation, use Torque Connection 1.2mm (105.005);• Observe indicated torque;• Available in two heights: 4mm and 6mm.

• Available in Titanium;• Two pieces;• Component with through bolt;• Cemented prosthesis;• To installation, use Torque Connection 1.2mm (105.005);• Observe indicated torque;• Available in two heights: 4mm and 6mm.

52

Pro

sth

eti

cs

Co

mp

on

en

ts

CM Mini Ball Attachment

Conical Torque Connection 4.1 mm

Positioner

straight

Positioner

7º

Positioner

14º


•Directly over the implant;

•For Overdenture prosthesis, its function is the O’ring retention;

•It's recommended capture the components in patient's mouth, one by one;

•Application of Nitride Titanium coating for increased the wear resistance;

•O’ring with protection disc;

•See the demonstrative sequence of Mini Ball Attachment on page 131.

O’ring with Cylinder

Disc

32N.cm

BallAttachmentInstalled

Demonstrativesequenceof

MiniBallAttachmentMorseTaper


53

straight,7ºe14º

CastableBallAttachment

Positioners

102.069 102.070 102.071 102.097 102.098

CMMiniBallAttachment

1.5mm 2.5mm 3.5mm 4.5mm 5.5mm

•Available in Titanium; •Select according to the mucosa height; •To installation, use Torque Connection 1.2mm (105.005); •Castable: casting in various metals;

•May be cemented in natural roots or waxed in bars for overdenture retention.

•Available in polymer; •Indicated to define the correct distance between Attachment Ball components and O’ring with cylinder; •Corrects the parallelism between the implants;•Essential for O’ring capturing.

102.078

102.076

102.073

102.077

O’ringwithcylinder

O’ring

ProtectionDisc

102.075

O’ringRemover

O’ringMount

104.044

104.043

•Digital Driver with function of O’ring replacing to the cylinder.

•Digital Driver with function of O’ring replacing to the cylinder.

•Available in polymer;•Positioned at the overdenture prosthesis base, has the function of Attachment Ball retention;

•Not Autoclavable.

•Available in polymer;•Positioned at the overdenture prosthesis base, has the function of Attachment Ball retention;

•Not Autoclavable.

•Packaging with 10 units.

Dem


MiniBallAttachm

ent

MorseTaper

54

E x t e r n a l H e x

55

•Results in the integrity of the External Hex;

•Maintains the original rotational freedom;

•Greater practicality and safety;

•Higher mechanical resistance to insertion;

•Transport tweezers for safety in the handling of the implant.

Hex2.37m

m

Hex2.7mm

Ø3.3mm

Ø4.1mm

1mm

0.7mm

Hex3.3mm

Ø5.0mm

Hex2.7mm

Ø 3.3

Ø 4.1

Ø 4.3

Ø 5.0

ScrewedProsthesis


•Mini Conical Abutment (multiple)

•Angled Mini Conical Abutment 17° (multiple) •Castable UCLA •Tilite UCLA •CoCr UCLA •Zirconia UCLA

•SF Mini Conical Abutment (multiple)

•Angled Mini Conical Abutment 17° and 30° (multiple)

•SF Conical Abutment (unitary) •Castable UCLA •Gold UCLA•Tilite UCLA •CoCr UCLA •Zirconia UCLA •UCLA Zirconia with Titanium

interface

•Mini Conical Abutment (multiple)


•Conical Abutment (unitary) •Castable UCLA •Gold UCLA •Tilite UCLA •CoCr UCLA •Zirconia UCLA

•SF Mini Conical Abutment (multiple)


•SF Conical Abutment (unitary)

•Castable UCLA •Tilite UCLA •CoCr UCLA •Zirconia UCLA

•Angled Post 17°•Universal Post •Customized Post•Castable UCLA •Gold UCLA •Tilite UCLA •Titanium UCLA •CoCr UCLA •Zirconia UCLA

•Mini Ball Attachment •Clip Bar •Mini Conical Abutment •Castable UCLA •Gold UCLA •Tilite UCLA •CoCr UCLA

•Angled Post 17°and 30° •Universal Post •Customized Post •Castable UCLA •Gold UCLA •Tilite UCLA •Titanium UCLA •CoCr UCLA •Zirconia UCLA •SF Post


•Mini Conical Abutment •Angled Mini Conical Abutment 17° and 30° •Cylinder and Distal External Bar Passive Fitting Technique • Cylinder of Castable Mini

Abutment • Cylinder of Titanium Mini

Abutment • Cylinder of Brass Mini

Abutment

•Mini Conical Abutment •Angled Mini Conical •Abutment 17° and 30° •Cylinder and Distal External Bar

Passive Fitting Technique • Cylinder of Castable Mini



Abutment

•Angled Post 17° •Tilite UCLA •Castable UCLA •Titanium UCLA •CoCr UCLA •Zirconia UCLA

3.3 e 3.5 mm

3.75 e 4.0 mm

4.5 e 5.0 mm

4.5 e 5.0 mm

EXTERNALHEX

Inte

rnal

Thr

ead

Ø 1

.8In

tern

al T

hrea

d Ø

2.0

Inte

rnal

Thr

ead

Ø 2

.0In

tern

al T

hrea

d Ø

2.5 •Angled Post 17°

•Customized Post •Castable UCLA •Tilite UCLA •Titanium UCLA •CoCr UCLA •Zirconia UCLA


•Mini Conical Abutment •Angled Mini Conical •Abutment 17° and 30° •Cylinder and Distal External

Bar

Passive Fitting Technique • Cylinder of Castable Mini



Abutment

1mm

1mm

Ø4.3mm

56

Imp

lan

ts

Drillingsequence


• Cylindrical implant with External Hex interface;


• Capture and installation with contra-angle or manual without

mount use (reduction of surgical time);


• High cutting capacity;

• Suitable for bones type I and II;

• Cover screw and mount not included;

• Installation through implant internal hex, increasing the

mechanical resistance (when applied elevated torque),

preserving the external hex integrity;


• Installation rotation: 30 rpm;

3.75 mm

4.0 mm

4.5 mm

5.0 mm

Optional

Init

ial

Dri

ll

Tita

max

Dri

ll 2

.0

Pil

ot

2/3

Tita

max

Dri

ll 3

.0

Tita

max

Dri

ll 3

.15

Tita

max

Dri

ll 3

.3

Pil

ot

3/3

.75

Co

un

ters

ink

4.1

Tita

max

Dri

ll 3

.8

Tita

max

Dri

ll 4

.3

Co

un

ters

ink

5.0

57

Coverscrew

9.0 mm7.0 mm 11.0 mm 13.0 mm 15.0 mm 17.0 mm

Ø 4.0

Ø 3.75

Platform(4.1)

Platform(4.1)

Platform(5.0)

Ø 4.5

Ø 5.0

109.284 109.285 109.286 109.287 109.288

109.302 109.303 109.304 109.305 109.306

109.327 109.328 109.329

109.294 109.295 109.296 109.297

117.018 117.003

4.1 mm 5.0 mm

106.092

106.127 106.128 106.129 106.130

106.093 106.094 106.095

2.0 mm 2.0 mm3.0 mm 3.0 mm4.0 mm 4.0 mm5.0 mm 5.0 mm

Ø 4.1 Ø 4.1

Ø 5.0 Ø 5.0

DivergentHealings ParallelHealings

106.084

106.097 106.098 106.099 106.100

106.085 106.086 106.087

2.0 mm 3.0 mm 4.0 mm 5.0 mm

Ø 4.1

Ø 5.0

SlimFitHealings

106.195 106.196 106.197 106.198

106.190 106.191 106.192 106.193

58

Imp

lan

ts


•Cylindrical implant with External Hex interface;


• Capture and installation with contra-angle or manual without mount

use (reduction of surgical time);






• Installation through implant internal hex, increasing the mechanical

resistance (when applied elevated torque), preserving the external hex

integrity;

• Prosthetic platform 4.1mm;



Optional

3.75mm

4.0mm

Internal Torque

Init

ial

Dri

ll

Tita

max

Dri

ll 2

.0

Pil

ot

2/3

Tita

max

Dri

ll 2

.8

Tita

max

Dri

ll 3

.0

Tita

max

Dri

ll 3

.3

Pil

ot

3/3

.75

Co

un

ters

ink

4.1

Tita

max

Dri

ll 3

.8

Tita

max

Dri

ll 4

.3

Co

un

ters

ink

5.0

Drillingsequence

59

9.0 mm 11.0 mm 13.0 mm 15.0 mm 17.0 mm 19.0 mm

Ø 4.0

Ø 3.75

109.588

109.582

109.589

109.583

109.590

109.584

109.591

109.585

109.592

109.586

109.593

109.587

117.018

4.1 mm

106.092 106.093 106.094 106.095

2.0 mm 2.0 mm3.0 mm 3.0 mm4.0 mm 4.0 mm5.0 mm 5..0 mm

Ø 4.1 Ø 4.1 106.084 106.085 106.086 106.087

2.0 mm 3.0 mm 4.0 mm 5.0 mm

Ø 4.1 106.190 106.191 106.192 106.193

Platform(4.1)

Platform(4.1)

Inte

rn

al

To

rq

ue

Coverscrew


SlimFitHealings

60

Imp

lan

ts


3.75mm

4.0mm

5.0mm

•Cylindrical implant with External Hex interface;















Optional

Drillingsequence

Init

ial

Dri

ll

Tita

max

Dri

ll 2

.0

Pil

ot

2/3

Tita

max

Dri

ll 3

.0

Tita

max

Dri

ll 3

.3

Pil

ot

3/3

.75

Co

un

ters

ink

4.1

Tita

max

Dri

ll 3

.8

Tita

max

Dri

ll 4

.3

Co

un

ters

ink

5.0

61

9.0 mm7.0 mm 11.0 mm 13.0 mm 15.0 mm 17.0 mm

Ø 4.0

Ø 3.75

Ø 5.0

109.311 109.312 109.313 109.314 109.315

109.289 109.290 109.291 109.292 109.293

109.298 109.299 109.300 109.301

117.018 117.003

4.1 mm 5.0 mm

Plataforma(4.1)

Plataforma(4.1)

106.092

106.127 106.128 106.129 106.130

106.093 106.094 106.095


Ø 4.1 Ø 4.1

Ø 5.0 Ø 5.0

106.084

106.097 106.098 106.099 106.100

106.085 106.086 106.087

2.0 mm 3.0 mm 4.0 mm 5.0 mm

Ø 4.1

Ø 5.0 106.195 106.196 106.197 106.198

106.190 106.191 106.192 106.193

Coverscrew


SlimFitHealings

62

Imp

lan

ts

•Conical implant with External Hex interface;




• Suitable for bones type III and IV and pos-extracting installation;

• Cover screw and mount not included;





• External Hex with height of 1mm: platform 4.3 and 5.0;

4.3mm

5.0mm

Optional


Drillingsequence

Init

ial

Dri

ll

Alv

im D

rill

2.0

Alv

im D

rill

3.5

Alv

im D

rill

4.3

Co

un

ters

ink

4.3

Alv

im D

rill

5.0

Co

un

ters

ink

5.0

63

Ø 5.0

Ø 4.3

10.0 mm 13.0 mm 16.0 mm

109.321 109.322 109.323

109.324 109.325 109.326

117.018 117.003

4.3 mm 5.0 mm

106.092

106.127 106.128 106.129 106.130

106.093 106.094 106.095


Ø 4.1 Ø 4.1

Ø 5.0 Ø 5.0

106.084

106.097 106.098 106.099 106.100

106.085 106.086 106.087

2.0 mm 3.0 mm 4.0 mm 5.0 mm

Ø 5.0 106.195 106.196 106.197 106.198

Coverscrew


SlimFitHealings

64

Imp

lan

ts

•Cylindrical implant with External Hex;





• Suitable for bones type I and II in reduced prosthetic spaces

(upper lateral incisor and lower incisor);


• External Hex with height of 1mm;

• Resistance to the installation torque : 45 N.cm;



3.3mm

with Mount


Drillingsequence

Init

ial

Dri

ll

Tita

max

Dri

ll 2

.0

Tita

max

Dri

ll 2

.8

Co

un

ters

ink

3.3

65

11.0 mm9.0 mm 13.0 mm 15.0 mm 17.0 mm

Ø 3.3

109.140 109.141 109.142 109.143 109.144

117.001

3.3 mm

106.065 106.066 106.067 106.068


Ø 3.3 Ø 3.3 106.060 106.061 106.062 106.063

Coverscrew


wit

h M

ou

nt

66

Imp

lan

ts

•Conical implant with External Hex;


• Cover screw included;

• Suitable for bones type III and IV in reduced prosthetic spaces

(upper lateral incisor and lower incisor) and pos-extracting

installation;


• External Hex with height of 1mm;

• Resistance to the installation torque : 45 N.cm;



3.5mm

Init

ial

Dri

ll

Alv

im D

rill

2.0

Alv

im D

rill

3.5

Co

un

ters

ink

3.3

Optional

with Mount

Drillingsequence


67

Ø 3.5

10.0 mm 13.0 mm 16.0 mm

109.217 109.218 109.219

117.001

3.3 mm

106.065 106.066 106.067 106.068


Ø 3.3 Ø 3.3 106.060 106.061 106.062 106.063

Platform(3.3)

wit

h M

ou

nt

Coverscrew


68

Pro

sth

eti

cs

Co

mp

on

en

ts


• Minimum interocclusal space of 6.1mm on platform 4.1,

and 6.7mm on platform 5.0mm, from the mucosa level;


• Single screwed prosthesis (anti-rotational);

• Cylinders with screw;

• Slim Fit components, that minimize bone remotion of the

Countersink Drill, facilitating the intermediate seating and

the tissue accommodation.


SFConicalAbutmentExternalHex

Torque Connection 1.2

Conical SF Abutment Conical Abutment 4.3 mm

Conical Abutment 5.0 mm




Sequence 4.1 / 4.3 mm

Sequence 5.0 mm

Conical Micro Abutment 4.1 Transfer Conical Micro Abutment 5.0 Transfer

Conical Mini Abutment 4.1 Analogue Conical Mini Abutment 5.0 Analogue

Conical Mini AbutmentProtection 4.1 Cylinder

Conical Mini Abutment Protection 5.0 Cylinder


Conical Mini Abutment 4.1 Cylinder Conical Mini Abutment 5.0 Cylinder

Co

Cr/

Tili

te

Cas

tab

le

Cas

tab

le

Tita

niu

m

Tita

niu

m

Co

Cr/

Tili

te

20N.cm

69

Dem


SFConicalAbutm

ent

ExternalHex

Ø 4.1

Ø 5.0

PolishingProtectorofConicalAbutment

Ø 4.1

Ø 5.0

Anti-rotationalAnalogueofConicalAbutment

Ø 4.1

Ø 5.0

ProtectionCylinderofConicalAbutment

ConicalAbutmentTransfer

Ø 4.1

Ø 5.0

Ø 4.1

Ø 5.0

CylinderScrewofConicalAbutmentt

Titanium Neotorque

Neotorque

•Component with molding function by prosthesis construction;

• Available in Titanium;• For open tray technique;• Anti-rotational;• Select transfer according to the component to be molded, as prosthetic planning.

•Protector for cylinders during polishing and finishing of prosthesis;

• Use the corresponding screw to the component for fixation.

•Application of a thin pellicle with carbon basis, which promotes low friction coefficient, resulting in pre-load increase.

•Available in Titanium;• Used to protect the component during the prosthesis con-struction;

• Observe the compatible diameter with the prosthetic compo-nent;


• Available in Titanium;• Replica of prosthetic component platform;• For prosthesis construction or prosthetic planning.

Castable Titanium Tilite CoCr

ConicalAbutmentCylinder

Ø 4.1

Ø 5.0

•Observe corresponding sequence to the component diameter and indicated torque;

• For torque, use Conical Torque Connection 4.1mm (105.009), except for Ø 5.0 Torque Connection 1.6mm (105.006);

• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

•Anti-rotational for screwed unitary elements;• Observe the corresponding sequence to the component diameter;• Screw included;• To screw torque, use Torque Conection 1.2mm (105.005);• Observe indicated torque;• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

1mm 2mm

Ø 4.1

Ø 5.0

Ø 4.3

3mm

SFConicalAbutment

Sli

m F

it115.051 115.052 115.053

115.007 115.008 115.009

115.192 115.193 115.194

101.030

101.027

106.051

106.052

An

tiro

tati

on

al

An

tiro

tati

on

al

118.106 118.107 118.140 118.233

118.110 118.111 118.142

108.035

108.025

Open-tray

108.075

Closed-tray

123.013

123.014

116.004 116.231

116.005 116.232

70

Pro

sth

eti

cs

Co

mp

on

en

ts




Sequence 3.3 / 4.1 / 4.3 mm

Sequence 5.0 mm

Mini Conical Abutment Analogue 4.1 Mini Conical Abutment Analogue 5.0

Protection Cylinder of the Conical Mini Abutment 4.1

Protection Cylinder of the Conical Mini Abutment 5.0


Micro Conical Abutment Transfer 4.1

Micro Conical Abutment Transfer 5.0

Angled

Mini Abutment

17º e 30º

20N.cm

Conical Mini Abutment 4.1 Cylinder Conical Mini Abutment 5.0 Cylinder

Cas

tab

le

Tita

niu

m

Go

ld /

Co

Cr

/ Ti

lite

Cas

tab

le

Tita

niu

m

Go

ld /

Co

Cr

/ Ti

lite

Conical Torque Connection

4.1 mm

SF Mini Conical Abutment 4.1 mm

32N.cm


SF Mini Conical Abutment 5.0 mm

32N.cm


• Minimum interocclusal space of 4.4mm on platform 4.1,

and 4.8mm on platform 5.0mm, from the mucosa level;

• Screwed and multiple prosthesis (rotational);


• Mini Conical Abutment presents 12 positions of fitting;




Countersink Drill, facilitating the intermediate seating and

the tissue accommodation.

SFConicalMiniAbutmentDemonstrativesequenceof

ExternalHex

71

Ø 4.1

Ø 5.0 123.009

123.008

PolishingProtectorofMiniConicalAbutment

108.023 108.024

108.021 108.022 108.068

MiniConicalAbutmentTransfer

Short screw

Closed-tray Open-tray Multifunctional

116.036

Ø 4.1

Ø 5.0

•Component with moulding function for the making of the prosthesis;

•Available in Titanium; •For the open-tray technique (drag);•Rotational;•Select the transfer in accordance with the component to be moulded conforming to the planned prosthetics.

2mm

Ø 4.1

Ø 5.0

Ø 4.3

3mm 4mm 5mm

AngledMiniConicalAbutment

115.084 115.074 115.075

115.076 115.077 115.078

115.094 115.095 115.096

17º

•Minimum interocclusal space of 4.4mm on platform 4.1, and 4.8mm on platform 5.0mm, from the mucosa level;

• Screwed and multiple prosthesis (rotational);• Observe corresponding sequence to the component diameter;• Observe indicated torque;• For torque, use Torque Connection 1.2 (105.005);• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

118.112 118.113 118.146

118.114 118.115 118.147 118.240

Castable Titanium Tilite

118.206 118.209 118.210

Gold CoCrCoCr

Para solda

CylinderofMiniConical

Abutment

Ø 4.1

Ø 5.0

1mm 2mm

115.187 115.188

115.054 115.055 115.056 115.057 115.058

115.197 115.198 115.199

Ø 4.1

Ø 5.0

Ø 4.3

3mm 4mm

115.189 115.190

5mm

115.191

SFMiniConicalAbutment

Sli

m F

itS

lim

Fit

•Observe corresponding sequence to the component diameter and indicated torque;

• Observe indicated torque;• For torque, use Conical Torque Connection 4.1mm (105.009), except for Ø 5.0 Torque Connection 1.6mm (105.006);

• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

Ø 4.1

Ø 5.0

106.054

106.055

ProtectionCylinderofMiniConicalAbutment

•Available in Titanium;•Used to protect the component during the prosthesis elaboration;

•Observe the compatible diametre with the prosthetic component;

•Use the Digital Driver 1.2mm (104.007) for installation.

Ø 4.1

Ø 5.0 101.022

101.020

AnalogueofMiniConicalAbutment

•Available in Titanium;•Replication of the prosthetic component;•For the making of the prosthesis and/or prosthetic planning.

•Rotational for screwed multiple elements;• Observe corresponding sequence to the component diameter;• To screw torque, use Torque Connection 1.2mm (105.005)• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

Ø 4.1

Ø 5.0

CylinderScrewofMiniConicalAbutment

Titanium Neotorque

116.037 116.227

116.038 116.228

Neotorque



•Application of a thin carbon-based film which promotes reduced friction resulting in an increase in the preload.

Ø 4.1

Ø 5.0

Ø 4.3 115.111 115.112 115.113

115.143 115.144 115.145

115.140 115.141 115.142

30º

SFConicalMiniAbutm

ent

Dem


ExternalHex

72

Pro

sth

eti

cs

Co

mp

on

en

ts

4.5

3.8

Universal Post Transfer

Prosthetic Torque

Ratchet Driver

Universal Post

Neotorque Screw


Universal Post Analogue

Universal Post Cylinder

Aluminum


Temporary


Castable

Ø4.5 Ø4.5 Ø4.5

Ø4.5

Ø4.5

32N.cm

4 ou 6

1, 2 ou 3 mm

UniversalPostDemonstrativesequenceof

ExternalHex


• Cemented prosthesis;

• The Universal Post can be prepared according to circunstances,

and, in this case, the prosthetic sequence can not be used;

• Compatible with platform 4.1 and 4.3 External Hex;

• Screw not included;

• Available in two heights: 4mm and 6mm

73

• Component with molding function by prosthesis construc-tion;

• Available in polymer;• For closed tray technique;• Anti-rotational;• Select transfer according to the component to be molded, as prosthetic planning.

1mm

4mm

4mm

4mm

4mm

2mm

6mm

6mm

6mm

6mm

Ø 4.5

Ø 4.5

Ø 4.5

Ø 4.5

3mm

UniversalPost

UniversalPostAnalogue

UniversalPostSet

• Available in Titanium;• Replica of prosthetic component;• For prosthesis construction and/or prosthetic planning.

• Components Kit of Universal Post line, containing the Transfer and Provisional / Castable Cylinders.

114.177 114.178 114.179

114.180 114.181 114.182

108.045

108.044


101.041

101.040

108.062

108.063

• Available in:Provisional: for provisional prosthesis;Alumina: for “metal free” prosthesis;Castable: casting.• Cemented prosthesis;• Compatible with all Universal Posts, when not prepared.

4mm

6mm

Ø 4.5

118.188 118.183 118.194

118.189 118.184 118.195

TemporaryAluminium Castable

CylinderofUniversalPost

Ø 4.1

Ø 4.3

Neotorque

Neotorque Titanium

UniversalPostScrew

116.180 116.002

• Application of a thin pellicle with carbon basis, which promotes low friction coefficient, result-ing in pre-load increase.

UniversalPost

Dem


E xternalHex

74

Pro

sth

eti

c C

om

po

ne

nts



Neotorque Screw Neotorque Screw Neotorque Screw Titanium Screw

Personalised Post 4.1 mm

Personalised Post 5.0 mm

Angled Post (17º e 30º)3.3/ 4.1/ 4.3 / 5.0 mm

Implant Analogue

Ø3.3 / Ø4.1 / Ø4.3 / Ø5.0 Ø3.3 / Ø4.1 / Ø4.3 / Ø5.0

Conical Transfer 3.3 mm / 4.1 mm / 4.3 mm / 5.0 mm

Dragl Transfer 3.3 mm / 4.1 mm / 4.3 mm / 5.0 mm

32N.cm

32N.cm

32N.cm

32N.cm

Slim Fit Post 4.1 mm


• Cemented prosthesis;

• Angled Post presents 12 positions of fitting;

• Customizable Post without screw. It is recommended to use the

Neotorque screw;


Countersink Drill, facilitating the intermediate seating and the

tissue accommodation.

PostDemonstrativesequenceof

ExternalHex

75

Ø 3.3

Ø 3.3

Ø 4.3

Ø 4.3

Ø 4.1

Ø 4.1

Ø 5.0

Ø 5.0

•Component with molding function by prosthesis construction;•Available in Titanium;•Select transfer according to the implant to be molded, as prosthetic planning.

ImplantTransfer

108.012

Antirotational

Rotational

108.013

108.038

108.029

108.066

108.003

108.002

108.001

108.011

108.034

108.067

108.006

Open-trayClosed-tray

2mm 3mm

Ø 3.3

Ø 4.3

Ø 4.1

Ø 4.1

Ø 5.0

4mm 5mm

AngledPost

•Anti-rotational•Titanium screw included;•Observe indicated torque;•To torque, use Torque Connection 1.2mm (105.005);•To torque control, use Prosthetic Torque Ratchet Driver (104.026).

114.025 114.026 114.027

114.016 114.017 114.018

114.049 114.050 114.051

114.071 114.072 114.073

17º

114.009 114.010 114.01130º

Ø 4.1

•To installation, use Torque Connection 1.2mm (105.005);•To unitary elements, select Neotorque Screw;•Screw not included;•Observe indicated torque;•To torque control, use Prosthetic Torque Ratchet Driver (104.026).

SlimFitPost

114.237

Antirotational

114.236

Rotational

Ø 3.3

Ø 4.3

Ø 4.1

Ø 5.0

ImplantAnalogue

101.002 101.001

Titanium Brass

101.004 101.003

101.028 101.024

101.006 101.005

•Available in Brass and Titanium;•Replica of implant platform;•For prosthesis construction and/or prosthetic planning.

Ø 4.1 for ø 5.0

Ø 4.1 for ø 6.0

Ø 5.0 for ø 6.0

•Available in Titanium;•Cemented prosthesis;•To installation, use Torque Connection 1.2mm (105.005);•To unitary elements, select Neotorque Screw;•Screw not included;•Observe indicated torque;•To torque control, use Prosthetic Torque Ratchet Driver (104.026).•Available to platform 4.1, 4.3 and 5.0 .

CustomizablePost

114.029

114.030

114.035

Ø 3.3

Ø 4.3

Ø 4.1

Ø 5.0

PostScrew

116.188 116.001

116.189 116.003

116.180 116.002

Neotorque

Neotorque Titanium

• Application of a thin pellicle with carbon basis, which promotes low friction coefficient, resulting in pre-load increase.

Post

Dem


ExternalHex

76

Co

mp

on

en

tes

Pro

téti

co

s

• Prosthetic component directly over the implant hex;

• For screwed or cemented prosthesis;

• Available in Rotational or Anti-Rotational;

- Tilite and CoCr: overcastting;

- Castable: casting;

- Titanium: Provisional or Cemented Prosthesis

- Gold: Overcasting with high melting range leagues. With Titanium

and Neotorque screw;

• Observe presentation with screw;

• For unitary elements, select Neotorque screw.

UCLA

Analogue3.3 mm

Analogue4.1 mm

Analogue4.3 mm

Analogue5.0 mm

UCLA3.3 mm

UCLA4.1 mm

UCLA4.3 mm

UCLA5.0 mm


Prosthetic Torque

Ratchet Driver

32N.cm

Neotorque Screw

Ø3.3 / Ø4.1 / Ø4.3 / Ø5.0 Ø3.3 / Ø4.1 / Ø4.3 / Ø5.0

Closed-tray Transfer

3.3 mm / 4.1 mm / 4.3 mm / 5.0 mm

Open-tray Transfer

3.3 mm / 4.1 mm / 4.3 mm / 5.0 mm


ExternalHex

77

SDem


UCLA

ExternalHex

108.011

108.034

Ø 3.3

Ø 3.3

Ø 4.3

Ø 4.3

Ø 4.1

Ø 4.1

Ø 5.0

Ø 5.0

•Component with molding function by prosthesis construction;•Available in Titanium;•Select transfer according to the implant to be molded, as prosthetic planning.

•Zirconia Line with and without a Titanium base.

ImplantTransfer

108.012

Antirotational

Rotational

108.013

108.038

108.029

108.066

108.003

108.002

108.001

108.067

108.006

Open-trayClosed-tray

116.003

116.002

116.001Ø 3.3

Ø 4.3

Ø 4.1

Ø 5.0

UCLAScrew

116.188

116.189

116.180

Neotorque Titanium

Ø 3.3

Ø 4.3

Ø 4.1

Ø 5.0

ImplantAnalogue

101.002

Titanium

101.001

Brass

101.004 101.003

101.028 101.024

101.006 101.005

•Available in Brass and Titanium;•Replica of implant platform;•For prosthesis construction or prosthetic planning.

Ø 3.3

Ø 4.3

Ø 4.1

Ø 5.0

123.004

123.005

123.002

123.003

PolishingProtector



Ø 3.3

Ø 3.3

Ø 4.3

Ø 4.3

Ø 4.1

Ø 4.1

Ø 5.0

Ø 5.0

UCLA

Antirotational

Rotational

118.204

118.097

118.009

118.040118.029 118.219

118.027 118.243

118.121 118.217 118.244

118.079 118.215118.212

118.235

118.237 118.006

118.101

118.004

118.001

CastableTilite Zirconia

Zirconia with Titanium

belt Cobalt-Chrome (Cocr)

118.008

GoldTitanium

118.205

118.152

118.030

118.028

118.026

118.120

118.078118.211

118.234

118.236 118.007

118.119

118.005

118.002

Neotorque• Application of a thin pellicle with carbon basis, which promotes low friction coefficient, result-ing in pre-load increase.

78

Pro

sth

eti

c C

om

po

ne

nts


• Directly over the implant;

• It´s recommended capture the components in

patient’s mouth, one by one;

• O’ring with protection disc;

• Application of Nitride Titanium coating for increased

the wear resistance;

• See the demonstrative sequence of Mini Ball

Attachment on page 131.

InstalledBallAttachment


4.1


4.3


5.0

Conical Torque Connection 4.1


Positioner straight

Positioner 7º

Positioner14º

O’ring with cylinder

Protection Disc

32N.cm

MiniBallAttachmentDemonstrativesequenceof

ExternalHex

79

102.060 102.061 102.062 102.093

102.063 102.064 102.065 102.094

102.066 102.067 102.068 102.095

MiniBallAttachment

2mm

Ø 4.1

Ø 4.3

Ø 5.0

3mm 4mm 5mm

• To installation, use Conical Torque Connection 4.1mm (105.009);

• Observe indicated torque;• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

straignt,7ºe14º

CastableAttachmentBall

Positioners

•Castable: casting in various metals;•May be cemented in natural roots or waxed in bars for overdenture retention.

•Available in polymer;•Indicated to define the correct distance between Attachment Ball components and O’ring with cylinder;•Corrects the parallelism between implants;•Essential for O’ring capturing.

102.078

102.076

102.073

102.077

O’ringwithcylinder

O’ring

ProtectionDisk

102.075O’ringRemover

O’ringMount

104.044

104.043

• Digital Driver with function of O’ring replacing to the cylinder.

• Digital Driver with function of O’ring placement to the cylinder.

• Available in Titanium (cylinder);• Available in polymer (O’ring);• Positioned at the overdenture prosthesis base, has the function of Attachment Ball retention;

• Not autoclavable.

• Available in polymer (O’ring);• Positioned at the overdenture prosthesis base, has the function of Attachment Ball retention;


• Package with 10 units.

MiniBallAttachm

ent

Dem


ExternalHex

80

I n t e r n a l H e x

81

•Prostheticcomponentswithreducedplatformin

relationtotheimplant(SwitchingPlatform);

•Installationdriverwithtweezerstoincreasethe

transportsecurityandtheimplantplacement;

•Cervicalmicroretentionstobonetissue

maintenance;

•Uniqueprostheticsequenceindependentofthe

implantplatformdiameter.

INTERNALHEX

Inte

rnal

Thr

ead

Ø 1

.6

• Mini Conical Abutment II Plus (multiple);

• UCLA Tilite II Plus (unitary);• UCLA CoCr II Plus (unitary);• UCLA Zirconia II Plus• Conical Abutment II Plus

• Universal Post II Plus• Angled Post II Plus 17°

and 30°• UCLA Tilite II Plus• UCLA CoCr II Plus (unitary)• UCLA Zirconia II Plus

•Mini Ball Attachment II Plus •Clip Bar

• Mini Conical Abutment II Plus

• UCLA Tilite II Plus• UCLA CoCr II Plus

(unitary).

• Mini Conical Abutment II Plus;

• Cylinder and Distal External Bar.

Passive Fitting Technique • Cylinder - Castable Mini

Abutment• Cylinder – Titanium Mini

Abutment • Cylinder – Brass Mini

Abutment

3.75,4.3e5.0mm

4.3e5.0mm

ImplantDiameter

ProstheticPlatformDiameter

ScrewedProsthesis


PlatformDiameter

2.5mm

HEXAGON

2.6mm

82

Imp

lan

ts


Prosthetic Components with

reduced platform in relation

to the implant (Switching

Platform).

• Cylindrical implant with Internal Hex interface;




• Suitable for bones type I and II;





Drillsequence

3.75mm

5.0mm

Init

ial

Dri

ll

Tita

max

Dri

ll 2

.0

Pil

ot

2/3

Tita

max

Dri

ll 3

.0

Pil

ot

3/3

.75

Tita

max

Dri

ll 3

.15

Co

un

ters

ink

II 4

.3

Tita

max

Dri

ll 3

.8

Tita

max

Dri

ll 4

.3

Co

un

ters

ink

II 5

.0

Optional

5.0

3.8

83

11.0 mm9.0 mm7.0 mm 13.0 mm 15.0 mm

Ø 3.75

(4.3)

Ø 5.0

109.462 109.463 109.464 109.465 109.466

109.474 109.475 109.476 109.477

Coverscrew

117.014

Healings

5.0 mm4.0 mm3.0 mm2.0 mm

106.176 106.177 106.178 106.179

84

Imp

lan

ts

ProductCharacteristics:

• Conical implant with Internal Hex interface;


• Suitable for bones type III and IV and pos-extracting

installation;





4.3mm

5.0mm

Init

ial

Dri

ll

Alv

im D

rill

2.0

Alv

im D

rill

3.5

Alv

im D

rill

4.3

Co

un

ters

ink

II 4

.3

Bro

ca A

lvim

5.0

Co

un

ters

ink

II 5

.0

Optional

Drillsequence

Prosthetic Components with

reduced platform in relation

to the implant (Switching

Platform).

5.0

3.8

85

Ø 4.3

Ø 5.0

10.0 mm 13.0 mm 16.0 mm

109.478 109.479 109.480

109.481 109.482 109.483

Coverscrew

Healings

117.014

5.0 mm4.0 mm3.0 mm2.0 mm

106.176 106.177 106.178 106.179

86

Pro

sth

eti

c C

om

po

ne

nts


ConicalAbutmentIIPlusInternalHex


Prosthetic Torque Ratchet

Driver


Conical Abutment II Plus


Conical Abutment Transfer 4.1

Conical Abutment

Analogue 4.1

Protection Cylinder of Conical Mini Abutment 4.1

Conical Abutment Cylinder 4.1

Cas

tab

le

Tita

niu

m

Tili

te /

Co

Cr

20N.cm


• Minimum interocclusal space of 6.1mm from the mucosa

level;


• Single screwed prosthesis (anti-rotational);

• Concept Switching Platform;

• Compatible components with implants diameter (Ø 3.75,

Ø 4.3 and Ø 5.0);



87

106.051

ProtectionCylinderofConicalAbutment

108.035

108.020

108.075

108.018

101.027

123.013

ConicalAbutmentAnalogue

Open tray Closed tray

Titanium Neotorque

116.004 116.231

Castable

Anti-rotational

Rotational

Anti-rotational

Rotational

Titanium Tilite CoCr

CylinderofConical

AbutmentIIPlus

1.0mm 2.0mm

ø4.1

ø4.1

ø4.1

ø4.1

ø4.1

2.0mm 3.0mm3.0mm 4.0mm

ConicalAbutmentIIPlus

AngledConicalAbutmentIIPlus17°

115.184115.203

115.185115.204

115.186115.205

118.106

118.104

118.107

118.105

118.233

118.232

118.140

118.139

• For torque, use Conical Torque Connection 4.1mm;• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

• To torque, use Conical Torque Connection 4.1mm;• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

•Available: -Titanium: Provisional prosthesis; -Tilite and CoCr: Overcasting; -Castable: Casting. •Anti-rotational for unitary screwed elements;• Screw included;• To screw torque, use Torque Connection 1.2mm (105.005);• Observe indicated torque;• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

• Available in Brass and Titanium;• Replica of implant platform or prosthetic component;• For prosthesis construction or prosthetic planning.


• Observe the compatible diameter with the prosthetic component;


• Component with molding function by prosthesis construction;• Available in Titanium;• For open tray or closed tray technique;• Rotational and Anti-rotational;• Select transfer according to the component to be molded, as prosthetic planning.

ConicalAbutmentTransfer

PolishingProtectorofConicalAbutment

CylinderScrewofConicalAbutment


•Use the corresponding screw to the component fixation.

ConicalAbutm

entIIPlus

Dem


InternalHex

Neotorque• Application of a thin pellicle with carbon basis, which promotes low friction coefficient, resulting in pre-load increase.

88

Pro

sth

eti

c C

om

po

ne

nts


MiniConicalAbutmentIIPlusInternalHex

Mini Conical Abutment II Plus

Conical Torque

Connection 4.1 mm


Multifunctional Mini Conical Abutment

Transfer



Protection Cylinder of Mini Conical Abutment


Tita

niu

m

Cas

tab

le



Go

ld /

Til

ite

/ C

oC

r

20N.cm


• Minimum interocclusal space of 4.4mm from the

mucosa level;

• Screwed and multiple prosthesis (rotational);


• Concept Switching Platform;

• Compatible component with implants diameter II Plus

(Ø 3.75, Ø 4.3 and Ø 5.0);



89

Ø 4.1 123.008

PolishingProtectorofMiniConicalAbutment

118.112 118.113 118.146

Castable Titanium Tilite

118.063 118.209 118.210

Gold CoCrCoCr for welding

CylinderofMini

ConicalAbutment

Ø 4.1

115.155

1mm 2mm

115.156 115.157 115.158 115.159

3mm 4mm 5mm

MiniConicalAbutmentIIPlus

• Observe indicated torque;• To torque, use Conical Torque Connection 4.1mm (105.009);• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

Ø 4.1 106.054

ProtectionCylinderofMiniConicalAbutment

• Available in Titanium;• Used to protect the component during the prosthesis construction;• Observe the compatible diameter with the prosthetic component;• To installation, use Digital Driver 1.2mm (104.007).

Ø 4.1 101.020

MiniConicalAbutmentAnalogue

• Available in Titanium;• Replica of prosthetic component platform;• For prosthesis construction and prosthetic planning.



•Available in: -Titanium: prosthesis; -Tilite and CoCr: overcastting; -Castable: casting; -Gold alloy: overcastting with high melting range leagues.• Titanium and Neotorque screws included;• Rotational for screwed multiple elements;• To screw torque, use Torque Connection 1.2mm (105.005);• Observe indicated torque;• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

Ø 4.1

CylinderScrewofMiniConicalAbutmentTitanium Neotorque

116.037 116.227

ConicalM

iniAbutm

entIIPlus

Dem


InternalHex

Neotorque•Application of a thin pellicle with carbon basis, which promotes low friction coefficient, resulting in pre-load increase.

116.036

ø4.1 108.022108.021 108.068

MiniConicalAbutmentTransfer

Open tray Closed tray

Screw Short

Multifunctional

•Available in Titanium;•Component with molding function by prosthesis construction;•For open tray or closed tray technique;•Rotational;

90

Pro

sth

eti

c C

om

po

ne

nts


UniversalPostIIPlusInternalHex

20N.cm

Universal Post Transfer


Universal Posthigh 4.0 mm

Universal Posthigh 6.0 mm

Neotorque Screw


Universal Post Analogue


Aluminium


Provisional


Castable

Ø4.5 Ø4.5

Ø4.5

Ø4.5

Ø4.5



•Screw not included;

•The Universal Post can be prepared according to circunstances,

and, in this case, the prosthetic sequence can not be used;

•Compatible component with implants diameter II Plus (Ø 3.75,

Ø 4.3 and Ø 5.0);

ø3.8

ø4.5

4 ou 6

Transmucous

91

• Component with molding function by prosthesis construction;

• Available in polymer;• For closed tray technique;• Anti-rotational;• Select transfer according to the component to be molded, as prosthetic planning.

1mm4mm

4mm

4mm

4mm

2mm6mm

6mm

6mm

6mm

Ø 4.5

Ø 4.5

Ø 4.5

Ø 4.5

3mm

UniversalPost

• To installation, use Torque Connection 1.2mm (105.005);• For unitary elements, select Neotorque screw.• Observe indicated torque;• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

• Available in two heights of cemented area: 4mm and 6mm.

UniversalPostAnalogue

UniversalPostSet

•Available in Titanium;•Replica of prosthetic component;•For prosthesis construction and prosthetic planning.

•Components Kit of Universal Post line, containing the Transfer and Provisional / Castable Cylinders;

114.123 114.124 114.125

114.126 114.127 114.128

108.045

108.044


101.041

101.040

108.062

108.063

•Available in: -Provisional: for provisional prosthesis; -Alumina: for “metal free” prosthesis; -Castable: casting.•Cemented prosthesis; •Compatible for all Universal Posts, when not prepared.

4mm

6mm

Ø 4.5

118.188 118.183 118.194

118.189 118.184 118.195

Temporary Alumina Castable

CylinderofUniversalPost

Neotorque Titanium

UniversalPost

ScrewIIPlus

116.228 116.002

UniversalPostIIPlus

Dem


InternalHex

Neotorque•Application of a thin pellicle with carbon basis, which promotes low friction coefficient, resulting in pre-load increase.

92

Pro

sth

eti

c C

om

po

ne

nts


AngledPostIIPlusInternalHex



•Anti-rotational;

•Titanium screw included.



Angled Post II Plus

Transfer

II Plus

Analogue II Plus

20N.cm

20N.cm

93

2mm 3mm

Ø 4.3

Ø 5.0

4mm 5mm

AngledPostIIPlus

•Component with molding function by prosthesis construction;•For open tray or closed tray technique.

114.171 114.172 114.17317º

114.174 114.175 114.17630º

AnalogueIIPlus

101.032

101.034

ImplantTransfer

Antir-otacional

108.046 108.047

Open TrayClosed Tray

•Available in Brass;• Replica of implant platform;• For prosthesis construction and prosthetic planning.

• Observe indicated torque;• To torque, use Torque Connection 1.2mm (105.005);• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

AngledPostIIPlus

Dem


InternalHex

94

Pro

sth

eti

c C

om

po

ne

nts


UCLAIIPlusInternalHex

Transfer II Plus

Analogue II Plus

UCLA II Plus UCLA II Plus UCLA II Plus

CoCr

Tilite

Titanium 20

N.cm



Neotorque Screw

•Directly over the implant;

•Screwed or cemented prosthesis;

•Multiple or unitary elements;

•Available in:

-Tilite and CoCr: overcastting;

-Titanium: provisional or cemented prosthesis;

•Screw not included;

•For unitary elements, select Neotorque screw.

95

UCLAIIPlus

Anti-rotational

Rotational

118.190 118.214

118.213

Tilite CoCr

118.185

Titanium

116.224Ø 4.1

ScrewIIPlus

116.226

Neotorque Titanium

Ø 4.3

ImplantAnalogueIIPlus

101.032

•Available in Brass;•Replica of implant platform;•For prosthesis construction and prosthetic planning.

•Component with molding function by prosthesis construction;•Available in Titanium;•For open tray or closed tray technique;•Anti-rotational;

ImplantTransfer

Anti-rotacional

108.046 108.047

Closed trayOpen tray

UCLAIIPlus

Dem


InternalHex

Neotorque• Application of a thin pellicle with carbon basis, which promotes low friction coefficient, resulting in pre-load increase.

96

Pro

sth

eti

c C

om

po

ne

nts


MiniBallAttachmentIIPlusInternalHex

Mini Ball Attachment II Plus


• Directly over the implant;

• It´s recommended capture the components in patient’s

mouth, one by one;

• Application of Nitride Titanium coating for increased the

wear resistance;

• O’ring with protection disc;

• See the demonstrative sequence on page 131.

Conical Torque Connection

4.1


PositionerStraight

Positioner7º

Positioner14º

O’ring with Cylinder

Protection Disc

32N.cm

BallAttachmentInstalled.

97

102.078

102.090 102.091 102.092 102.096

MiniBallAttachmentIIPlus

2mm 3mm 4mm 5mm

Straight, 7º e 14º

Positioners

102.073

102.077

O’ringwithCylinder

O’ring

ProtectionDisc102.075

O’ringRemover

O’ringMount

104.044

104.043

• To installation, use Conical Torque Connection 4.1mm (105.009);

• Observe indicated torque;• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

• Digital Driver with function of O’ring replacing to the cylinder.

• Digital Driver with function of O’ring placement to the cylinder.

•Package with 10 units.

• Available in polymer;• Defines the correct distance between Attachment Ball and O’ring;

• Essential for O’ring capturing.• Corrects the parallelism between implants;

• Cylinder in Titanium;• O’ring in polymer;• Positioned at the overdenture prosthesis base, has the function of Attachment Ball retention;


• Available in polymer (O’ring);• Positioned at the overdenture prosthesis base, has the function of Attachment Ball retention;


MiniBallAttachm

entIIPlus

Dem


InternalHex

CastableAttachmentBall

•Castable: Casting in various metals;•May be cemented in natural roots or waxed in bars for overdenture retention.

102.078

98

T r a n s g i n g i v a l

99

•SLIMFITProfile:Facilitatestheproceduresofsofttissues

synthesis(suture)bytheincreasingoftaperabutment;

•Unitarybody:highermechanicalstrength;

•Stabiliserscrewofprosthesiswithlargerdiameter(2mm);

•Highresistancetoinsertiontorque;

•Reductionofworkingtime;

•NeoporosSurfacetreatment;

•Usedforsinglestagesurgery;

•Suitableforinferiorprotocoltechnique;

•WorkcanbemadewithfewernumberofImplants.

TRANSGINGIVAL

Inte

rnal

Scr

ew Ø

2.0

3.75,4.0e4.5mm

•Castable GT Cylinder •Tilite GT Cylinder •Titanium GT Cylinder •CoCr GT Cylinder

•Clip Bar •Castable GT Cylinder

•Cylinder and Distal Extension Bar•Neopronto Technique

Passive Fitting Technique •Castable GT Cylinder•Titanium GT Cylinder•Brass GT Cylinder

ScrewedProsthesis


Ø4.8mm

2.6mm

3.0mm

100

Imp

lan

ts


• Cylindrical implant;

• Unitary body;



• Suitable for inferior protocol;

• Prosthetic component integrated to the implant;

• Emergency profile that facilitates tissue accommodation

(Slim Fit);

• Transmucosa height 3mm;



3.75mm

4.0mm

4.5mm

Init

ial

Dri

ll

Tita

max

Dri

ll 2

.0

Pil

ot

Dri

ll 2

/3

Tita

max

Dri

ll 3

.0

Tita

max

Dri

ll 3

.15

Tita

max

Dri

ll 3

.3

Pil

ot

Dri

ll 3

/3.7

5

Tita

max

Dri

ll 3

.8

Drillsequence

Optional

101

109.345

109.455

109.346

109.456

109.347

109.457

109.348

109.458

109.341

109.355

109.342

109.356

109.343

109.357

109.344

109.358

11.0 mm

11.0 mm

13.0 mm

13.0 mm

15.0 mm

15.0 mm

17.0 mm

17.0 mm

109.337

109.351

109.338

109.352

109.339

109.353

109.340

109.354

Ø 3.75

Ø 3.75

Ø 4.0

Ø 4.0

Ø 4.5

Ø 4.5

102

Ne

op

ron

to

Advantages:

•Fast treatment;

•Reduced cost;

•Easy technique and practicality;

•Prosthetic bar prefabricated in Titanium;

•Definitive prosthesis;

•Guided surgery;

•Mandibular protocol.

•It´s a system for inferior protocol surgery, guided

with prefabricated bars;

• Case in autoclavable polymer;

• Driver, connections and surgical instruments re-

quired to Neopronto technique;

• Specific technique with GT Implants.


103

Neopronto Surgical Kit Case

Initial Drill Plus

Neopronto Drill 2.0 Plus




Neopronto Drill Guide 2.0




Neopronto Bone Tap 3.75



Neopronto Implant Mount

Short Digital Driver 1.2

Hex Connector for Short Ratchet

Hex Connector for Contra-angle

Surgical Torque Ratchet

Titanium Tweezers

Neopronto GT Surgical Bar

Neopronto Surgical Guide Pin

Neopronto Surgical Guide

Neopronto Parallel Indicators

110.145

103.170

103.175

103.176

103.177

103.178

125.018

125.019

125.020

125.021

111.026

111.027

111.028

113.021

104.007

105.001

105.002

104.027

129.001

125.025

125.010

125.009

128.014

1

1

1

1

1

1

1

1

1

1

1

1

1

4

1

1

1

1

1

1

2

1

3

ItemscontainedintheNeoprontoSurgicalKit

104

1 2 3

4 5 6

7 8 9

Surgical Guide for the Neopronto Bar positioned over the ridge, with demarcation of the distal oblique incisions.

Osteotomy of the alveolar ridge. Surgical Guide for the Neopronto Bar positioned over the ridge, to evaluate the disposition of the implants.

Margin of safety from the distance of distal Implants in relation to the mentual emergencies with flags of 7 mm.

Stabilization of Surgical Guide for Neopronto Bar with guide pin and drilling with graft drill of 1.6 mm.

Neopronto Surgical Bar fixing with graft screws of 2.0 x 12 mm.

Positioning of Drill Guide 2 mm and drilling with respective drill. Observe double irrigation.

Implants installation. Observe the mounters seating over the Neopronto Surgical Bar.

Surgical Bar removed and GT Implants installed.

105

10 11 12

13 14 15

16 17 18

Placement of Multifunctional Guide between the arches to re-establish the intermaxillary relations and make the union with acrylic resins and the transfers. After union, fluid silicon is injected to the soft tissue impression.

Transfers union with acrylic resin.Suture completed.

Protection Cylinders installation. See the Multifunctional Guide.

Observe the difference between the laboratorial work screw for cementing cylinder and the Neopronto Prosthetic Bar Screw.

Installation of Neopronto Prosthetic Bar over the Titanium cylinders and mounting in the articulator.

Cemented titanium cylinders in Neopronto Prosthetic Bar.

Final intraoral frontal view.

106

NeoprontoSurgicalGuide

• Allows the osteotomy planning in Neopronto cases or in Conventional Protocol cases;

• Assists in implant position planning (relation of distal implants with mentuals emergencies);

• Guide the perforations for Neopronto Surgical Bar fixing.

NeoprontoDrillGuide

• Attachment on Neopronto Surgical Bar to guide perforations;

• With screw to fix Neopronto Surgical Bar;• Observe drill sequence according to the implant.

PinforNeoprontoSurgicalGuide

• Stabilizes the Surgical Guide for Neopronto Bar.

125.009

125.018 ø2.0

125.019 ø3.0

125.020 ø3.3

125.021 ø3.8

125.010

107

128.014

NeoprontoParallel

IndicatorNeoprontoBoneTap

NeoprontoSurgicalBar

• Available in Titanium;• Chambers system for irrigation;• Lower perforations to bar fixing with graft screws 2.0mm;• Higher perforations to Drill Guide and GT Implant installation (with mount);

• For better adaptation to the bone, use Neopronto Surgical Guide.

125.025

NeoprontoProstheticBar

• Available in Titanium;• Prefabricated structure for Neopronto protocol prosthesis;

• May be desgasted conform required and would be cemented over the specific Titanium cylinders for Neopronto technique.

125.002

•Available in Titanium;• Forms the first threads to guide the implant during the installation.

• Available in Titanium;• Direction guides to implants installation, in relation to the antagonist.

111.026

3.75mm

111.027

4.0mm

111.028

4.5mm

108

NeoprontoDrillPlus

• Available in surgical stainless steel;• Twist Drill for Ø2.0mm and tri-spade to anothers diam-eters;

• Markings from 9 to 17mm.

103.175

ø2.0mm

103.176

ø3.0mm

103.177

ø3.3mm

103.178

ø3.8mm

NeoprontoProstheticBarScrew

• Final fixing of protocol prosthesis;• Torque of 20 N.cm;• To torque, use Torque Connection 1.2mm (105.005);• To torque control, use Prosthetic Torque Ratchet Driver (104.026).

116.157

NeoprontoMount

•Available in Titanium;•Specific for GT Implant installation in the Neopronto Technique.

113.021

GTOpenTrayTransfer

• Available in Titanium;• Torque screw included to use with multifunctional guide;

• Rotational for protocol.

108.010

GTAnalogue

•Available in Titanium;•GT Implant replica;•For prosthesis construction or prosthetic planning.

101.037

DRILLSPLUS:Count with the application of a thin pellicle with carbon basis, which promotes low friction coefficient and reduction of the heat generated on osteotomy.

109

NeoprontoCylinder

WorkScrew

• Available in Titanium;• Its function is the union of Prosthetic Bar to the model during the prosthesis construction.

116.087

ø5.0mm

GTProtectionCylinder

• Available in Titanium;• Protect the GT Implant Abutment during the prosthesis confeccion;

• To installation, use Digital Driver 1.2 (104.007).

106.102

CylinderforcementingoftheNeoprontoBar

• Available in Titanium;• Allows prosthesis passivity;• Cemented before waxing;• Screw included only for cementation.

118.013

GTPassiveFittingCylinder

• Cylinders to use the Passive Fitting technique with casted structure over the GT Implants.

118.174 118.173 118.172

Castable Brass Titanium

•Use Driver 1.2.

NeoprontoCylinderScrew

116.038

Observation:Aftertheimplantsinstallation,ifthereisnopassive

fittingfoProstheticBar,isindicatedusethecylindersfromthe

PassiveFittingTechnique(describedonSurgicalTechniquesbook).

Observation:Aftertheimplantsinstallation,ifthereisnopassive

fittingfoProstheticBar,isindicatedusethecylindersfromthe

PassiveFittingTechnique(describedonSurgicalTechniquesbook).

110

Z y g o m a t i c

111

Zy

go

ma

tic

112

Imp

lan

ts


• Cylindrical implant;

• Morse Taper interface, with different dimensions of the conventional

implants (same dimensions of WS Titamax Implant) or External Hex

4.1mm;

• Smooth surface;

• Pre-mounted;


• Double thread in CM Zygomatic version;

• It is indicated to use the Transepithelial Abutment according to the

prosthetic interface.

Observation: This technique requires specificaccreditation.

Informationonwww.neodent.com.br

Ø 4.4mm

Nom

inal

Len

gth

Ø 3.9mm

Hex2.7m

mØ4.1mm

0.7mm

ø3.0mm

113

ZygomaticCMCoverScrew

117.016

30.0 mm 35.0 mm 40.0 mm 45.0 mm 47.5 mm 50.0 mm 52.5 mm

109.522 109.523 109.524 109.525 109.526 109.527 109.528

ExternalHexCoverScrew

30.0 mm 35.0 mm 40.0 mm 45.0 mm 47.5 mm 50.0 mm 52.5 mm

109.460 109.450 109.451 109.452 109.461 109.453 109.454

117.018

4.1

ExternalHex

MorseTaper

114

Pro

sth

eti

c C

om

po

ne

nts


TransepithelialZygomaticAbutment

External HexTransepithelial Abutment

Morse TaperTransepithelial Abutment

Conical Torque Connection 4.1mm

Transfer

Transepithelial Abutment Analogue

Protection Cylinder of Transepithelial Abutment



Prosthetic TorqueRatcht Driver

20N.cm


•Minimum interocclusal space of 4.5mm;

•Screwed and multiple prosthesis;

•Exclusive for Zygomatic Implants;

•Machined cylinder in Tilite and CoCr for overcastting and

castable for casting.

Transepithelial Abutment Cylinder

TiliteCoCrCastable

32N.cm

115

Transepithelial

Dem


ZygomaticAbutm

ent

•Morse Taper Model compatible with WS Titamax.

MorseTaperTransepithelialAbutment

TransepithelialAbutmentCylinder

Castable CoCr Tilite

118.034 118.254 118.150

• Castable: casting;• Tilite: overcastting in Tilite (screw included);• CoCr: overcasting in various metals (screw included).

CylinderScrew

116.004

TransepithelialAbutmentOpenTrayTransfer

108.026

• Available in Titanium;• Open Tray:• Rotational.

TransepithelialAbutmentAnalogue

101.018

• Brass;• Transpithelial abutment replica;• For prosthesis construction or prosthetic planning.

ProtectionCylinderofTransepithelialAbutment

106.056

• Available in Titanium;• Suitable to protect the component in mouth during the prosthesis elaboration;


115.023 115.024 115.025 115.026

ExternalHexTransepithelialAbutment

3mm 4mm 5mm 6mm

115.172 115.173 115.174 115.175

3mm 4mm 5mm 6mm

116

Zy

go

ma

tic

K

it



• Drills and connections for Zygomatic Implants –

External Hex and Morse Taper;

• Insert not included (KAVO).

Observation: This technique requires specificaccreditation.


117

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

110.214

104.042

105.067

105.069

103.190

103.191

103.192

103.193

103.197

103.208

128.016

124.004

129.011

129.012

104.007

104.039

Zygomatic Surgical Kit Case

Zygomatic Installation Driver

Zygomatic Contra-Angle Connection

Connection for exchange of Zygomatic Drills

Zygomatic Spherical Drill 2.9 Plus

Zygomatic Twist Drill 2.7 Plus

Zygomatic Pilot Twist Drill 2.7/3.3 Plus

Zygomatic Twist Drill 3.3 Plus

Zygomatic Countersink Drill CM Plus

Zygomatic Pilot Twist Drill 3.3/3.7 Plus

Zygomatic Height Measurer CM

Zygomatic Labial Protector

Zygomatic Bicortal Probe

Zygomatic Probe



ItemscontainedinZygomaticKit

* •Illustrative photo

118

S u r g i c a l T e c h n i q u e s

119

Su

rg

ica

l T

ec

hn

iqu

es

120

Su

rgic

al

Te

ch

niq

ue

s

•Specific composition for the technique;

•Case in autoclavable polymer;

•Drivers, connections and surgical instruments

necessary to the Neoguide technique;

• Technique suitable for virtual planning and

flapless surgery.

Obs.:Thistechniquerequiresspecificaccreditation.


•Case in autoclavable polymer

•Instruments for use of the technique, only with CM

Implants with diameter of 3.5 mm in reduced prosthetic

spaces (mesio-distal);

•Supplement to Neoguide Kit;

•The Narrow Neoguide technique does not use the

implant insertion guide.

CharacteristicsofNeoguideKit CharacteristicsofNarrowNeoguideKit

121

ItemsincludedinNeoguideSurgicalKit

Neoguide Surgical Kit Case

Neoguide Rotatory Punch

Neoguide Manual Punch

Neoguide Lance Drill

Neoguide Drill 1.3

Neoguide Drill 2.0

Neoguide Drill 2.8

Neoguide Drill 3.0

Neoguide Drill 3.3

Neoguide Pilot Drill 3.5



Hex Connector for Contra-angle

Hex Connector for Short Ratchet


Digital Driver for Torque Connectors

Driver for Neoguide Mount

Neoguide Drill Guide 2.0




Neoguide Guide Clamp

Neoguide Mount 3.5

Neoguide Mount 3.75

Neoguide Mount 4.0


Titanium Tweezers

Implant Guide 3.5

Implant Guide 3.75

Implant Guide 4.0

110.220

103.180

103.181

103.182

103.179

103.183

103.184

103.185

103.186

103.187

103.188

103.189

105.002

105.001

104.007

104.005

125.037

125.033

125.034

125.035

125.036

125.032

113.033

113.034

113.035

104.027

129.001

125.029

125.030

125.031

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

4

5

5

5

1

1

5

5

5

Narrow Neoguide Surgical Kit Case

Narrow Neoguide Pilot Drill

Narrow Neoguide Rotatory Punch

Narrow Neoguide Manual Punch

Narrow Neoguide Drill Guide 2.0

Narrow Neoguide Drill Guide 2.8

Narrow Neoguide CM Mount

110.225

103.196

103.194

103.195

125.039

125.040

113.037

1

1

1

1

1

1

2

ItemsincludedinNarrowNeoguideKit

*illustrative photos

122

NeoguideDrills

• Twist Drill for Ø1.3 and Ø2.0 and Tri-Spade for another diameters;• Available in surgical stainless steel;• Sequence for perforation of surgical alveolus;• Drill 1.3 for perforation in the fixing tubes of Surgical Guide;• Markings from 7 to 17mm.

103.179 103.183 103.184 103.185 103.186

ø1.3 ø2.0 ø2.8 ø3.0 ø3.3

103.187 103.188 103.189

NeoguidePilotDrills

• Surgical stainless steel coated in carbon, which provides a lower friction coefficient;

• Preparation of the bone crest for seating of cervical third in CM Titamax Implants;

• Indicated for bones type I and II.

ø3.5 ø3.75 ø4.0

NeoguideInitialDrill

103.182

• Surgical Stainless Steel with a carbon coating that provides reduced frictions;

• Breaking of cortical bone.

Punch

• Surgical stainless steel coated in carbon, which provides a lower friction coefficient;

• Guided circular incision for mucosa removing;• Rotatory Punch – used with contra-angle;• Manual Punch – used manually with Digital Drivers for Torque Connections (104.028);

• Also indicated as circular scalpel.

103.180

103.194

103.181

103.195

Rotatory Manual

NeoguideMount

• Surgical stainless steel;• Specific mount for Neoguide technique;• Narrow Neoguide Kit Mount is used only to the installa-tion of CM Implants Ø3.5mm.

113.033 113.034 113.035

ø3.5 ø3.75 ø4.0

125.037

DriverforNeoguideMount

• Assists in exchange of conventional Mount for the specific Mount of the Neoguide Technique.

Neoguide Kit

Neoguide Kit

Neoguide Kit

Narrow Neoguide Kit

Narrow Neoguide Kit

Narrow Neoguide Kit

113.037

103.196

DRILLPLUS:Count with the application of a thin pellicle with carbon basis, which promotes low friction coefficient and reduction of the heat generated on osteotomy.

123

125.029

125.032

125.030 125.031

ø3.5 ø3.75 ø4.0

GuideforNeoguideImplants

• Available in Titanium;• Guide for installation of CM Implants in Neoguide Technique;

• The colors indicate the CM Implant diameter.GuideClamp

• Titanium;• Pin for fix the surgical guide over the ridge;• Effective length of 12mm and Ø 1.3mm.

DrillGuide

• Use the corresponding drill to the Surgical Guide diameter (colors);• Embedded in the washers of Surgical Guide;• The colors indicate the CM Implant diameter.

125.033Neoguide Kit

125.039Narrow Neoguide Kit

125.034

125.040

125.035 125.036

ø2.0 ø2.8 ø3.0 ø3.3 • Available in Titanium;• Used with Mini Conical Abutment Analogue for obtain the work model;

• 3 spreaders with 1mm of height included;• Technique for prosthesis construction before the surgery.

Neoguide

Support

101.054

124

Su

rgic

al

Te

ch

niq

ue

s


PassiveFitting

Technique that allows the passive fitting without

welding through Titanium cylinder cementation in

the metallic structure. Used for multiple prosthesis

and results in laboratorial working time reduction.

125

PassiveFitting

Dem


118.083

118.250

118.086

118.174

118.089

118.081

118.248

118.084

118.173

118.087

118.082

118.249

118.085

118.172

118.088

Castable

Castable

Castable

Castable

ø4.1

ø5.0

Brass

Brass

Brass

Brass

Titanium

Titanium

Titanium

Titanium

PassiveFittingCylindersofMiniConicalAbutment

PassiveFittingCylindersofMicroConicalAbutment

PassiveFittingCylindersofTransepithelialAbutment

GTPassiveFittingCylinders

PassiveFittingWorkingScrew

4.1 mm 5.0 mm

116.086 116.087

126

1 Regularization of the alveolar ridge. 2 Surgical perforation concluded, checking the correct distance of the Distal Implant in relation to the mentual foramen with a 7mm flag.

3 Installation of 5 CM "C" Titamax Implants Ø3.75.

4 Installation of CM Mini Abutments. 5 Installation of squared transfers, replacing by the short screws (mini abutment cylinder screw) and making the union of transferents with acrylic resin.

6 Positioning of the Multifunctional Guide to obtain the intermaxillary relations. Make the union with acrylic resin of the transferents. After union, inject fluid silicon to the soft tissue impression.

7Removal of Multifunctional Guide and installation of Mini Abutment Analogues to the transferents.

8 Work model with artificial gingiva. 9 Castable Passive Fitting Cylinder, Brass Passive Fitting Cylinder and Titanium Passive Fitting Cylinder with slots and lower diameter than brass, compensating the casting contraction.

PassiveFittingDemonstrativesequenceof

127

1 0 Brass Cylinders are placed over the analogues and receive Castable Cylinders fixed with work screws.

1 1 1 2Casting ring with waxed infrastructure.

1 3

Casted infrastructure.

1 4Infrastructure adaptation over the model.

Final intraoral view.

PassiveFittingDemonstrativesequenceof

1 5Observe area for cementation.

1 6

Cementation with Panavia® (Kuraray Med. Inc. Tokyo-Japan) of the structure over the Titanium cylinders;

1 7Cementation with Panavia® (Kuraray Med. Inc. Tokyo-Japan) of the structure over the Titanium cylinders;

128

Su

rgic

al

Te

ch

niq

ue

s


DistalBar

ø4.1

ø5.0

PolishingProtector

123.008

Mini Abutment GT

123.009

123.012

• Protector for cylinders during finishing and polishing of prosthesis;


• Technique for facilitate mandibular rehabilitations with

Passive Fitting using a prosthesis type implant-supported

provisional protocol.

ø4.1

ø5.0

DistalBarCylinder

118.169

Mini Abutment GT

118.160

118.171

• Available in Titanium;• Retentions to facilitate the acrylic resin union;• Indicated torque: 10 N.cm;• Use Torque Connection 1.2 (105.005);• To torque, use Torque Connection 1.2 (105.005).

ø4.1

ø5.0

DistalBar

125.011

Mini Abutment

• Use in Distal Implants to strengthen the Cantilever.

GT

125.012

125.023

129

1

2GT Implant installed. 3Wear prosthesis, maintaining the integrity of posterior area.

4

Cylinders installation in Central Implants and of Distal Bar in posterior implants.

5Proof of the inferior prosthesis with wear (centrical occlusion position, without interference in cylinders).

6 Placement of a rubber dam over the cylinders to the soft tissue protection.

7

Application of autopolymerizable acrylic resin in the cylinders.

8 9Acrylic resin application between the cylinders

1 0

Application of inferior prosthesis in wear area, repositioning in mouth, patient in occlusion even your full polimerization.

Implant-supported provisional prosthesis concluded.

1 1

Remotion of inferior prosthesis after resin polimerization, cylinders captured.

Final intraoral posterior view.1 2Wear, finishing and polishing of inferior prosthesis with polishing protectors.

DistalBarDemonstrativesequenceof

130

119.007

119.008

119.009

ClipBarcasted.

Castable Cover for Clip

(needs casting)

Bar

(needs casting)

Clip

Su

rgic

al

Te

ch

niq

ue

s


BarClip

131

1 Construction of new total prosthesis.

Lateral view of set.

2 Implants installed. 3 Components.

4 Attachment Ball installed. 5 Using of positioners to correct the parallelism between the Implants and determinate the correct distance between O’ring and Attachment.

6 Placement of protection disks.

Placement of O’rings.7 8 9Inferior view of alleviation.

10 First O’ring captured. 11

Proof of prosthesis to verify adaption without interference.

Second O’ring captured. 12

AttachmentBallMiniDemonstrativesequenceof

132

B o n e G r a f t i n g

&

O r t h o d o n t i c A n c h o r a g e

133

Bo

ne

Gr

aft

ing

an

dO

rth

od

on

tic

A

nc

ho

ra

ge

134

*illustrative photo

111111111111111

Bone Grafting and Orthodontic Anchorage CaseBone Grafting Manual DriverPhilips Connection for Manual DriverPhilips Connection for Contra-angleDrill 1.6 for Contra-angleDrill 1.3 for Contra-angleDrill 1.1 for Contra-angleDrill 1.6 for Straight Piece Drill 1.3 for Straight Piece Drill 1.1 for Straight PieceGraver for Bone Grafting and Orthodontic Anchorage Orthodontic Anchorage DriverContra-angle connection – Anchorage - LongContra-angle connection – Anchorage – ShortRatchet Adaptor for contra-angle connections

110.227104.018105.063105.023103.045103.079103.044103.043103.078103.042103.207104.033105.039105.040105.025

CompleteKit:BoneGrafting&OrthodonticAnchorage

BO

NE

GR

AF

TIN

G

AN

D

OR

TH

OD

ON

TIC

AN

CH

OR

AG

E K

IT

135

1

1

1

1

1

1

1

1

1

1

1

Bone Grafting and Orthodontic Anchorage Case

Bone Grafting Manual Driver

Philips Connection for Manual Driver

Philips Connection for Contra-angle

Drill 1.6 for Contra-angle



Drill 1.6 for Straight Piece



Graver for Bone Grafting and Orthodontic

Anchorage

110.227

104.018

105.063

105.023

103.045

103.079

103.044

103.043

103.078

103.042

103.207

BoneGraftingKit

1

1

1

1

1

1

1

1

1

Bone Grafting and Orthodontic Anchorage Case





Orthodontic Implant Driver

Long Connection

Short Connection

Ratchet Adaptor

110.227

103.079

103.044

103.078

103.042

104.033

105.039

105.040

105.025

OrthodonticAnchorageKit

136

Expanded Head

Expanded Head

Standard Head

6mm

Ø1.5mm

Ø2.0mm

Ø2.0mm Ø3.0mm Ø3.85mm

Ø1.5mm

Ø1.5mm Ø2.5mm Ø3.70mm

Ø2.0mm

8mm

8mm

10mm

10mm

12mm

12mm

14mm

14mm

116.194

ScrewforBoneGrafting

• Available in Titanium;• Osseous block fixation; • Self-tapping.

116.196 116.198 116.199 116.200

116.203 116.205 116.207

116.210 116.211 116.212

116.214 116.215 116.216

116.213

116.209

7mmCollar

Ø1.3mm

Ø1.6mm

Ø1.3mm

Ø1.6mm

9mm 11mm

Low

Low

Medium

Medium

• Implants for orthodontic movement;• Available in Titanium alloy according to ASTM-F136 (level V);• Torque resistance up to 10 N.cm (Ø 1.3mm) and 20 N.cm (Ø 1.6mm);• Self-tapping;• Collar height: -Low Collar: 0mm. -High Collar: 1mm.

109.484 109.485 109.486

Hex Size: 2.7 mm

Hole Diameter: 0,7mm

109.487 109.488 109.489

109.493 109.494 109.495

109.496 109.497 109.498

ImplantsforOrthodonticAnchorage

1 m

m

BO

NE

GR

AF

TIN

GA

ND

OR

TH

OD

ON

TIC

AN

CH

OR

AG

E

137

• Stainless steel;• Manual installation of Orthodontic Anchorage implants.

OrthodonticImplantDriver

104.033

GraverforBoneGraftingandOrthodonticAnchorage

103.207

• Stainless steel;• Initial severance of cortical.

ConnectionsandAdaptorsOrthodonticAnchorage

• Connections for Anchorage Implant installation with Ratchet and Contra-angle.

105.040

Short

105.039

Long

105.025

DrillsforOrthodonticAnchorage

• Suitable for bones type I and II;• Markings referent to the implant length (7.9 and 11mm).

103.042

7 mm9 mm

11 mm

103.078 103.043

103.044

Ø 1.1mm Ø 1.3mm Ø 1.6mm

Straight Piece

Contra-angle 103.079 103.045

BO

NE

GR

AF

TIN

G

AN

D

OR

TH

OD

ON

TIC

AN

CH

OR

AG

E

138

PhilipsDriver

HandDriver

104.018

105.063

Straight part

105.023

Contra-Angle

• Assists in handling of Philips Driver (105.063) and of Graver for Bone Grafting and Orthodontic Anchorage (103.207).

• Stainless steel;• Screws installation for Bone Grafting.

BO

NE

GR

AF

TIN

G

AN

D

OR

TH

OD

ON

TIC

AN

CH

OR

AG

E

139

Package of Orthodontic Anchorage Implant. Seal opening to get the implant in sterile capsule.

Cover removal to access the implant. Capture of implant with Orthodontic Anchorage Contra-angle Connection(105.040).

Option to insert the implant with a micromotor. Implant installation.

Insert option of implant manually with Orthodontic Anchorage Driver (104.033).

Implant installed.

1

3

5

7

2

4

6

8

Sequenceof

BO

NE

GR

AF

TIN

GA

ND

O

RT

HO

DO

NT

IC A

NC

HO

RA

GE

140

I n s t r u m e n t s

141

STERILISE

Sterilize on the eve of or in the day of procedure. It is

recommended, preferably, follow the method of sterilization

by steam autoclaving, and also the parameters and procedures

established in the regulation BS EN ISO 17665-1:2006 Moist

heat. Requirements for the development, validation and routine

control of a sterilization process for medical devices, or to proceed

conforming to the instructions manual from the manufacturer of

the autoclave.

WARNING: THE KITS ARE DAMAGED WHEN SEALED WITH

ADHESIVE TAPE.

DO NOT STERILIZE PRODUCTS MADE IN POLYMER AT HOTHOUSE.

VALIDITY OF STERILIZATION: 7 to 15 days, since kept in clean

environment, dry and away from the sun.

HYGIENE

Kits Neodent and surgical instruments should be properly

cleaned after each use. Do not let them in contact with

moisture for prolonged periods.

1stStep:Disassemblepiece(ifapplicable).

2ndstep:Immergethewholepieceinenzymaticdetergent

withsolutionof10%.

3rdStep:Washinanultrasonicwasherforabout10minutes,

4thstep:Rinsewithdistilledwaterinabundancetoremove

completelythesolutionresidues,makinguseofbrushes.

5thstep:Drywithcleananddryclothorcompressedair.

6thstep:Realizevisualinspection,observingifthecleaning

processhasbeensuccessful.Ifthereisanydirt,thepiece

shouldbere-immersedindetergent–1stand2ndsteps-,

and,ifisnecessary,thecleaningshouldbedonewiththe

helpofawirebrushfordentaluse(repeattherinsingand

dryingsequence).

7thStep:Selectthepackaginginaccordancewiththe

sterilizationprocess.Preferablyusesurgicallevelfilmand

paperenvelope.

IMPORTANT: Never store the material without complete drying.

Drying is very important to prevent oxidations.

ATTENTION: Do not use not incrusted products (non-enzymatic).

They tend to darken the pieces and also cause oxidation. The

use of enzymatic liquid with concentration higher than 10%, as

well as drying of pieces containing cleaning solution residues,

helps oxidation and must be avoided. Ins

tr

um

en

ts

142

Su

rgic

al

Kit



• Drivers, connections and surgical instruments for

Titamax Implants and External Hex Alvim, Internal Hex,

Morse Taper and GT.

Observation:ItemscontainedinSurgicalKitarealsosoldseparately.Following,threesurgicalkitsaresuggested:Initial,IntermediaryandAdvanced.

143

ItemscontainedinSurgicalKit Advanced

Interm

ediate

Initial

110.206

103.170

103.171

103.162

103.213

103.163

103.164

103.165

103.166

103.167

103.168

103.172

103.173

103.174

103.209

103.239

103.211

103.242

103.216

103.217

103.218

103.219

103.220

103.091

105.047

105.045

105.046

105.050

105.048

105.049

105.001

105.018

105.002

128.015

113.014

113.020

113.036

128.019

128.020

128.021

128.022

128.023

104.039

104.007

104.028

104.027

129.004

129.001

105.030

105.031

105.068

103.077

103.070

Surgical Kit Case

Initial Drill PLUS

Alvim Twist Drill 2.0 PLUS

Twist Drill 2.0 PLUS

Pilot Drill 2/3 PLUS







Alvim Drill 3.5 PLUS



Countersink Drill 3.3 PLUS

SF Countersink Drill 4.1 PLUS

Countersink Drill 4.3 PLUS

SF Countersink Drill 4.5 and 5.0 PLUS

CM Pilot Drill 2.8/3.5 PLUS

CM Pilot Drill 3/3.75 PLUS




Extension Drill

Connection for TI Contra-angle 4.1 and 4.3

Short TI Ratchet Connection 4.1 and 4.3

Long TI Ratchet Connection 4.1 and 4.3

Contra-angle TI Connection 5.0

Short TI Ratchet Connection 5.0

Long TI Ratchet Connection 5.0

Hex Connection for Short Ratchet

Hex Connection for Long Ratchet

Hex Connection for Contra-angle

Height Measurer CM

H.E. Long Mount 3.3

GT Mount

CM Long Mount 3.5

Parallel Indicators 2.8/3.5







Digital Driver for Contra-angle Connections

Surgical Torque Ratchet Driver

Depth Probe

Titanium Tweezers

Short Ratchet Connection II Plus

Long Ratchet Connection II Plus

Contra-angle Connection II Plus

Countersink Drill II Plus 4.3

Countersink Drill II Plus 5.0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

*illustrative picture

144

WS

Kit



• Drivers, connections and surgical instruments for CM

Titamax Implants and WS Titamax installation.

Observation:ItemscontainedinSurgicalKitarealsosoldseparately.Descriptionsshownnext.

145

ItemscontainedinWSKit

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

WS Surgical Kit Case

Initial Drill Plus








Extension Drill

Pilot Drill 2/3 PLUS



Pilot Drill 3.8/4.3 PLUS


Pilot Drill 4.3/5.3 PLUS




Hex Connection for Short Ratchet

Hex Connection for Long Ratchet

Hex Connection for Contra-angle

WS Post 4.5x6x0.8 Prosthetic Selection






WS Parallel Indicators 4.3/5.0

WS Parallel Indicators 5.3/6.0

Titanium Tweezers

Depth Probe

110.218

103.170

103.162

103.163

103.164

103.166

103.167

103.168

103.169

103.091

103.213

103.217

103.218

103.214

103.220

103.215

103.221

104.007

104.027

105.001

105.018

105.002

114.230

114.231

114.232

114.233

128.020

128.021

128.024

128.025

129.001

129.004


146

Dri

lls


The drills suffer wear during their use. Evaluate

their cut effectiveness periodically and observe the

need for substitution to avoid loss of implants.

DRILLSPLUS:Counts upon the application of a

thin pellicle with carbon basis which promotes

reduced friction and reduction of the heat gener-

ated in the osteotomy.

147

InitialDrillPlus

103.170Ø 2.0

• Surgical Stainless Steel;• Cortical disruption;• Diameter of 2.0mm.

AlvimDrill

Plus(Scaled)

• Surgical Stainless Steel and Zirconia;• Instrumentation sequence of surgical alveolus for Alvim Implants;

• Lenghts: -Standard: 35 mm.

103.174 103.255

103.173 103.254

103.172 103.253

Surgical Stainless Steel





Zirconia

Zirconia Zirconia

Zirconia

Zirconia

8.010.0

11.513.0

16.0

Ø 3.5

Ø 4.3

Ø 5.0

• Surgical Stainless Steel and Zirconia;• Its function is increase the surgical alveolus diameter, facilitating the next drill entry;

• Substitutes the Countersink Drill in use of the Morse Taper Implants;

• Markings indicates: osseous level, 1.0mm and 2.0mm intraosseous.

PilotDrillPlus

103.216 103.272

103.218 103.274

103.219 103.275

103.220 103.276

103.213

103.217 103.273

103.214 103.270

103.215 103.271

2.8/3.5 mm

3.3/4 mm

3.6/4.3 mm

4.3/5 mm

2/3 mm

3/3.75 mm

3.8/4.3 mm

4.3/5.3 mm

103.221 103.2775.3/6 mm

5.07.0

11.0

1.0

17.015.0

2.0Nível ósseo

6.0

9.0

13.0

CountersinkDrillPlus

• Surgical Stainless Steel and Zirconia;• Prepare of the bone crest for cervical third seating in Implants 3.3, 3.75, 4.0,4.5 and 5.0mm (external hex) and 4.3 and 5.0mm (internal hex).

103.212 103.268

103.242 103.292

103.209 103.263

ExternalHex InternalHex

Ø 4.1SlimFit

Ø 3.3

103.210 103.267Ø 5.0

103.211 103.293Ø 4.3

Ø 4.3

Ø 4.5/ Ø 5.0

Ø 5.0

103.077 103.298

103.070 103.299

TwistDrillPlus

103.171 103.232103.222103.228Ø 2.0

Short Alvim Short Alvim Long

103.162

Intermediate

• Surgical Stainless Steel and Zirconia;• Instrumentation sequence of surgical alveolus for Titamax Implants;• Lenghts: -Short: 31mm; -Intermediate: 35mm; -Long: 43mm.

103.224

103.225

103.230

103.231

Ø 3.0

Ø 3.15

Ø 3.3

103.164 103.245

103.166 103.247

103.165 103.246

103.226

103.227

Ø 3.8

Ø 4.3

Ø 5.3

103.167 103.248

103.168 103.249

103.169 103.250

103.223103.229Ø 2.8 103.163 103.244

148

Contra-angleConnection

• To capture the implant directly on the package;• For installation of External Hex Ti Implants and Internal Hex Ti Implants with contra-angle, or coupled to the Digital Driver (104.028) for manual installation;

• With tweezers to increase the security in transport and implant installation.

105.047 105.050 105.068

RatchetConnection

105.049 105.030 105.031105.048105.046105.045

4.1/4.3 5.0

5.0 4.3/5.0 4.3/5.05.04.1/4.34.1/4.3

4.3/5.0

ExternalHex–Ti InternalHex–IIPlus

Short Short Short Long Long Long

• For the installation of External Hex TI Implants and Internal Hex II Plus with Surgical Torque Ratchet Driver (104.027);

• Ratchet Connection II Plus with markings indicating the face position of internal hex.

• Available in Titanium;• Instrumental for implant position orientation;• Diameter of the central belt corresponding to the CM Implants diameter;

• Smaller side for use after drill 2.0mm;• Bigger side for use after last drill, before the implant installation.

ParallelIndicators

ExternalHex–TI InternalHex–IIPlus

128.019

128.020

128.021

128.022

128.023

128.024

128.025

WS

2.8/3.5

3.0/3.75

3.3/4.0

3.6/4.3

4.3/5.0

Ø 4.3/5.0

Ø 5.3/6.0

149

HexConnectionforContra-Angle

• Available in surgical stainless steel;• Adaptation of hex mounters;• For implant insertion, using motor and contra-angle;• Silicone ring for best fixing and mounter transport.

105.002

HexConnectionforRatchet(RatchetDriverConnection)

• Available in surgical stainless steel;• Adaptation of hex mounters;• Fit in squared ratchets;• Silicone ring for best fixing and mounter transport.

105.018105.001

Mounters(ImplantMount)

• Available in Titanium;• Requires Hex Connections 105.002 in motor use and 105.001 for Ratchet;

• Use Hex Driver 1.2mm for handling (104.007);• Long mounters 3.3 and 3.5 indicated for substitute the implant mount in cases of reduced interproximal space (mesio-distal).

113.014 113.020

GT

113.036

CM ExternalHex.

ø3.3mmø3.5mm

DrillExtension

• Available in surgical stainless steel;• With clamp bolt for drill fixation;• Fix screw to the drill extension;• For tighten and unleash the screw, it is necessary only around half turn of Hex Driver 1.2 (104.007).

103.091

150

DigitalDriver

• Available in surgical stainless steel;• Connected to the Contra-angle Connections Ti and II Plus, it becomes a manual driver for the implant installation.

104.028

HexDigitalDriver0.9mm

• Available in surgical stainless steel;• With divergent hex for best fixing and screw transport;

• Handling of Cover Screws in Implants 3.3, 3.5, 3.75,4.0, 4.3 and Healing 3.3 height 2mm.

-Short: 20mm; -Intermediate: 25mm; -Long: 38mm.

104.040104.041104.039

Medium LongShort

HexDigitalDriver1.2mm

• Available in surgical stainless steel;• With divergent hex for best fixing and screw transport;

• Handling of Mounters in Implants and Cover Screws.

-Short: 20mm; -Intermediate: 25mm; -Long: 38mm.

104.010104.012104.007

Medium LongShort

151

TitaniumTweezers

• To implants manipulation;• New system of tweezers, that avoids the deviation of the active tip;

• Scale in milimeters, for conference during the procedures.

129.001

SurgicalTorqueRatchetDriver

• Available in surgical stainless steel;• Extremely secure (a variation of less than 5%);• Realize calibration annually;• Fitting for square connections;• Collapsible ratchet, that allows the correct cleaning of set.

104.027

UseInstructions

The Surgical Torque Ratchet Driver was projected to allow the required torque application, and also allow that this torque be checked simultaneously with the same instrument.

The Neodent Surgical Torque Ratchet has pre-calibrated torques.

The ratchet function serves for both sides. Just pull and turn the pin driver 180°. However, the torque function is only in clockwise.

For this, only apply the force on the RATCHETSTEM, 1 until it reaches the value set in LATERALGRADUATION2which corresponds to the desired torque.

•Prosthetic: 10,15,20,32 and 45 N.cm;•Surgical: 45,60 and 80 N.cm.

CAUTION: When you reverse the direction of torque, the gear can be detached from the driver body and fall it. Therefore, this reversal should only be done with the driver connected to the piece or outside the patient’s mouth.

152

Pro

sth

etI

c I

ns

tru

me

nts

110.213105.065105.041105.005105.006105.007105.008105.009105.044105.071128.015104.005104.016104.026

Prosthetic Kit CaseTorque Connection 0.9Short Torque Connection 1.2Torque Connection 1.2Torque Connection 1.6Slot Torque ConnectionSquare Torque ConnectionConical Torque Connection 4.1Short Conical Torque Connection 4.1Long Torque Connection 1.2CM Height MeterDigital Driver for Torque ConnectionsTransfer DriverProsthetic Torque Ratchet Driver

XXXXX X X X X X X X X X

XXXXX

X X

X

11111111111111


Complete

Basic

153

• Surgical stainless steel;• Cleansing and sterilizing of the disassembled ratchet;

• Extremely secure (variation less than 5%);• Realize calibration annually;• Fitting for square connections;

ProstheticTorqueRatchetDriver

104.026

UseInstructions

The Surgical Torque Ratchet Driver was projected to allow the required torque application, and also allow that this torque be checked simultaneously with the same instrument.

The Neodent Surgical Torque Ratchet has pre-calibrated torques.

The ratchet function serves for both sides. Just pull and turn the pin driver 180°. However, the torque function is only in clockwise.

For this, only apply the force on the RATCHETSTEM,1until it reaches the value set in LATERALGRADUATION,2 which corre-sponds to the desired torque.

•Prosthetic: 10,15,20,32 and 45 N.cm;• Surgical: 45,60 and 80 N.cm.

CAUTION: When you reverse the direction of torque, the gear can be detached from the driver body and fall it. Therefore, this reversal should only be done with the driver connected to the piece or outside the patient’s mouth.

ProstheticAdaptationDriver

•Mandrel for analogues fixing and prosthetic components machining..

104.036

154

DriversandTorqueConnections

•Surgical Stainless Steel;•Observe corresponding connection to the prosthetic component screw;

•To torque control, the connections must be adapted to the Prosthetic Torque Ratchet Driver (104.026);

•To connections manual torque, must be adapted to the Digital Driver (104.007);

105.009

Square Slot 1.61.20.9

105.065 105.005 105.006 105.007 105.008 104.005105.041 105.042 105.044

1.6Short

1.2Short

Conical 4.1

Conical4.1 Short

Digital

105.071

1.2Long

• Surgical Stainless Steel;• Indicated for Conical Transfer (used in closed tray transfer).

TransferDriver

104.016

• Surgical Stainless Steel;• Length: -Short: 2 cm; -Intermediate: 2.6 cm; -Long: 3.8 cm; • Observe screw indications.

DigitalDriver0.9mm DigitalDriver1.2mm

104.039 104.007

Short ShortIntermediate MediumLong Long

104.041 104.012104.040 104.010

• Surgical Stainless Steel;• Length: -Short: 2cm; -Intermediate: 2,6 cm; -Long: 3,8 cm.• Observe screw indications.

• Connections for torque in prosthesis screws with motor;

• Observe connection according to the cor-responding screw.

0.9

105.066

Contra-angleTorqueConnections

105.010 105.012 105.013

1.2 1.6 Slot

155

Pro

sth

eti

c I

ns

tru

me

nts

• Illustrative Photo

110.223

114.191

114.192114.193114.194114.195114.196114.197114.198114.199114.200114.201114.202114.203114.204114.205114.206114.207114.208114.209114.226114.227114.228

114.210114.211114.212114.213114.214114.215114.216114.217114.218114.219114.220114.221114.222114.223114.224114.230114.231114.232114.233104.007114.335114.336114.337

CM Prosthetic Selection Kit CaseCM Post 3.3x4x0.8 Prosthetic Selection CM Post 3.3x4x1.5 Prosthetic Selection CM Post 3.3x4x2.5 Prosthetic Selection CM Post 3.3x4x3.5 Prosthetic Selection CM Post 3.3x4x4.5 Prosthetic Selection CM Post 3.3x4x5.5 Prosthetic Selection CM Post 3.3x4x6.5 Prosthetic Selection CM Post 3.3x6x0.8 Prosthetic SelectionCM Post 3.3x6x1.5 Prosthetic SelectionCM Post 3.3x6x2.5 Prosthetic SelectionCM Post 3.3x6x3.5 Prosthetic SelectionCM Post 3.3x6x4.5 Prosthetic Selection CM Post 3.3x6x5.5 Prosthetic Selection CM Post 3.3x6x6.5 Prosthetic Selection CM Post 4.5x6x0.8 Prosthetic SelectionCM Post 4.5x6x1.5 Prosthetic SelectionCM Post 4.5x6x2.5 Prosthetic SelectionCM Post 4.5x6x3.5 Prosthetic SelectionCM Post 4.5x6x4.5 Prosthetic SelectionCM Anatomical Post Height 1.5 Prosthetic Sel.CM Anatomical Post Height 2.5 Prosthetic Sel.CM Anatomical Post Height 3.5 Prosthetic Sel.

CM Post 4.5x4x5.5 Prosthetic SelectionCM Post 4.5x4x6.5 Prosthetic SelectionCM Post 4.5x6x0.8 Prosthetic SelectionCM Post 4.5x6x1.5 Prosthetic SelectionCM Post 4.5x6x2.5 Prosthetic SelectionCM Post 4.5x6x3.5 Prosthetic SelectionCM Post 4.5x6x4.5 Prosthetic SelectionCM Post 4.5x6x5.5 Prosthetic SelectionCM Post 4.5x6x6.5 Prosthetic SelectionCM Angled Post 3.3x6x1.5 17º Prosthetic SelectionCM Angled Post 3.3x6x2.5 17º Prosthetic SelectionCM Angled Post 3.3x6x3.5 17º Prosthetic SelectionCM Angled Post 3.3x6x1.5 30º Prosthetic SelectionCM Angled Post 3.3x6x2.5 30º Prosthetic SelectionCM Angled Post 3.3x6x3.5 30º Prosthetic SelectionWS Post 4.5x6x0.8 Prosthetic SelectionWS Post 4.5x6x1.5 Prosthetic SelectionWS Post 4.5x6x2.5 Prosthetic SelectionWS Post 4.5x6x3.5 Prosthetic Selection Short Digital Driver 1.2CM Anatomical Post Lateral 1.5 Prosthetic SelectionCM Anatomical Post Lateral 2.5 Prosthetic SelectionCM Anatomical Post Lateral 3.5 Prosthetic Selection

156

S u r g i c a l I n s t r u m e n t s

157

SU

RG

ICA

L

INS

TR

UM

EN

TS

158

TrephineBurs

103.051 103.026 103.087 103.027 103.028 103.029

Ø3.3mm Ø4.1mm Ø4.3mm Ø5.0mm Ø8.0mm Ø10.0mm

• Surgical Stainless Steel;• Osseous cylinder collect;• Implants removal;

BoneProfileDrill

Ø3.3mm Ø4.1mm

ExternalHex InternalHex

Ø4.3mm Ø5.0mm Ø4.3mm Ø5.0mm

• Surgical Stainless Steel;• Used in the second surgical phase;• Adapt the bone around implant platform, preparing the emergency profile compatible with the prosthetic component profile;

• Each drill has a guide with specific diameter.

103.039 103.030 103.085 103.031 103.102 103.103

AngleMeter

• Available in Titanium;• Angulations: 17° and 30°.• For selection and angulation planning of prosthetic component during the surgical procedure;

• Use indication: after Twist Drill 2.0.

128.017

17º

128.018

30º

Flags

128.008 128.007

9 mm 12 mm128.003

7 mm

• Surgical Stainless Steel;• Adaptive to mirrors handle;• Indicated for surgical/prosthetic planning.

ProstheticSurgicalGuide

103.093

Pin

103.092

Guide

• Available in Titanium;• Components for surgical guide construction;• Internal diameter of prosthetic guide 2mm;• Heights: 6mm and 10mm;• Surgical Guide: package with 10 units (5 units of 10mm and 5 units of 6mm);

• Surgical Guide Pin: package with 5 units.

AlvimRadiographicPositioner

129.013 129.014129.009

• Available in Titanium;• Used to check flapless osteotomy depth;• It is suggested make the periapical radiography for evaluation.

Ø 3.5 mm Ø 4.3 mm Ø 5.0 mm

0.35mm

16

11.513

10

8

159

1.8mm

1.8mm

2.5mm

2.5mm

3.0mm

3.0mm

3.5mm

3.5mm

4.0mm 4.5mm

• Surgical Stainless Steel;• Concave cutting tip for atraumatic elevation of maxillary sinus floor;

• Used in the preparing of surgical alveolus for implants installation in posterior maxillary area, which has less osseous height;


• Surgical Stainless Steel;• Convex tip;• Used when thickness bone is insufficient, requiring compression and prior bone expansion to the implant placement;


110.154

110.160

110.155

110.161

110.156

110.162

110.157

110.163

110.158 110.159

Osteotomes

OsteotomesModified

OsteotomesTray

• Autoclavable polymer;• Osteotomes sold separately.

110.180

17 mm13 mm9 mm

15 mm11 mm7 mm

17 mm13 mm9 mm

15 mm11 mm7 mm

160

Mallet

CurettesforSinusLifting

• Surgical Stainless Steel;• Detachment of sinusal membrana.

126.008 126.009 126.010 126.011 126.012

•Surgical Stainless Steel;•Used in compactors and expanders;•Weight: 150g.

126.001

161

DisposableBoneScraper

• Used to remove autogenous bone;• Unique usage;• Sterile.

127.023

127.016

Reto

127.017

Positivo

127.018

Negativo

127.019

Lâmina

MetalBoneScraper

• Used to remove autogenous bone applied in reconstructive surgery;

• Autoclavable;• Blade included;• Silicone handle;• Blade coated with Aluminium Nitride.

DisposableBoneCollector

• Used to collect autogenous bone;• Polymer;• Unique usage;• Adaptive to vacuum pump;• Two disposable sieves included;• Use the second tip to saliva suction (beware of contamination).

107.003

107.008

162

SurgicalLabialRetractor

124.001

• Available in Surgical Stainless Steel;• Rounded corners to minimize the surgical trauma.

ColumbiaRetractor

• Available in Surgical Stainless Steel;• Rounded corners to minimize the surgical trauma.

124.003

DepthProbe

• Available in Titanium;• For probing preparation and depth analysis;

• Scale in milimeters for conferences during procedure.

129.004

ScalpelHandle

• Available in Surgical Stainless Steel;• For use of conventional scalpel blade;• Blade not included.

129.008

163

BladeandHandleBivers

• Handle and blade in surgical stainless steel;• Atraumatic exodontics to implants installation;• Similar with a periostomal;• Blades supplied individually.

ComplementTray

• Autoclavable polymer;• Used to organize the drills and auxiliar con-nections.

110.211

Test

BoneMill

• Surgical Stainless Steel;• Bone volume gain;• The blade has 3-year of warranty against rust;• With lever for better facility during utilization;• Bone mill pestle with slots to optimize the bone block locking during use;

• Avoid bone handling originated in tissue bank.

Bovine bone block with volume = 1,76 cm³

Volume gain was approximately of 7 times.

Particles amplified.

127.011

129.002

129.005

164

Su

rgic

al

Mo

tor

1

2

3

6

7

4

5

Calibration System

Contra-angle Without light With light

Electronic Electronic and Mechanical (Dynamometre)

The Neosurg XT and XT Plus are small, light and can be easily transported anywhere. The products are ideal for anyone who tends to more than one surgery and wishes to have just one surgical motor.

As well as electronic calibration, the Neosurg XT Plus has a torque ratchet to guarantee yet more precision of the micro motor and contra-angle. The calibration is executed directly by the professional, without the need for maintenance from the manufacturer.

It´s not necessary to autoclave, the hose system is sterilisation only.

Allows perfect adaption of the irrigation handle, offering resistance and security. Can be sterilised.

Use the magnetic induction system, which does not produce noises nor vibrations. High Precision of the torque and variation of speeds.

Rigid body of the micro motor to not risk breaking. Doesn´t lose brightness with time of use, unlike the LED.

Highly resistant Titanium Body (XT Plus version), Internal and external irrigation system. Head with a reduced size and ergonomically compact body. Better visibility, access and mobility within the oral cavity.

All adjustments of the irrigation system, programs and speeds can be triggered by the pedal, leaving the hands free for surgical procedure. It was developed to avoid the accidental activation of micro motor system (progressive acceleration.)

CONTROL PANEL WITH EASIER INTERFACE

PORTABLE

ControlU

nit

MicroMotorContra-angle

MECHANICAL CALIBRATION SYSTEM

PUMP CONNECTED TO THE MOTOR

IRRIGATION SYSTEM WITH METAL CONNECTORS

MICRO MOTOR REINFORCED WITH A TITANIUM COATING

OPTICAL FIBER (XT PLUS VERSION)

CONTRA- ANGLE WITH REDUCED SIZE

INTELLIGENT CONTROL PEDAL

165

XT

XT PLUS

CONTRA-ANGLE WITH DENTAL LEVER

CONTRA-ANGLEPUSH BUTTON

WITH LIGHT

130.001

132.023

132.002

132.025

2 EXCLUSIVENEOSURGXTPLUS

5

67

4

3

1

Illumination

166

BauruAl. Dr. Octávio Pinheiro Brizolla, 7-4617012-059 - Bauru - SP - BrazilPhone: ++ 55 14 3201-3500

BeloHorizonteR. Grão Pará, 55430150-341 - Belo Horizonte - MG - BrazilPhone: ++ 55 31 3071-8700

BrasíliaSH/SUL, QD. 06 CONJ “A” BL. “F” Loja 2070316-901 - Brasília - DF - BrazilPhone: ++55 61 3298-3200

CuritibaAv. Visconde de Guarapuava, 383280250-220 - Curitiba - PR - BrazilPhone: ++ 55 41 2169-1000

USA3785 NW 82 Avenue Suite 211Zip Code 33166Doral - FLPhone: 305-913-7136

GoiâniaR. T-55, 199 - Sl. 4 a 674150-320 - Goiânia - GO - BrazilPhone: ++ 55 62 3878-7700

LondrinaR. Senador Souza Naves, 151086010-160 - Londrina - PR - BrazilPhone: ++ 55 43 3306-2000

PortoAlegreR. Félix da Cunha, 836 - Cj. 20290570-000 - Porto Alegre - RS - BrazilPhone: ++ 55 51 3272-7400

PortugalAv. Defensores de Chaves, 15 - 3º D1000-109 Lisboa - PortugalPhone: ++ (351) 21 013 4400

RecifeR. Francisco Alves, 325 - Sl. 40150070-490 - Recife - PE - BrazilPhone: ++ 55 81 3202-6900

RiodeJaneiroR. 2 de Dezembro, 38 - Cj. 302 a 30522220-040 - Rio de Janeiro - RJ - BrazilPhone: ++55 21 3622-8900

SãoPauloR. Francisco Leitão, 469 - Sl. 180905414-020 - São Paulo - SP - BrazilPhone: ++ 55 11 3728-2700

VitóriaR. Cassiano Antônio Moraes, 100 - Loja 0229050-525 - Vitória - ES - BrazilPhone: ++ 55 27 3203-5300

DISTRIBUTORSINBRAZIL

CampoGrande–MSAlphadent Implantes e InstrumentaisR. Padre João Cripa, 2385 – Bairro: Vila AltaCEP: 79010-180Phone: (67) 3027-5993 / 0800 600 5993

Cuiabá–MTAlphadent Implantes e InstrumentaisPhone: (67) 3027-5993 / 0800 601 5993Av. São Sebastião, 2454 – Bairro: PopularCEP: 78045-400

Florianópolis–SCImplantológica - Revenda NeodentPhone: (48) 3225-6069 / 0800 600 6069R. Tenente Silveira, 713 – CentroCEP: 88.010-301

Manaus–AMA R. RodriguezPhone: (92) 2121-7700Av. Nabuco, 2235CEP: 69.020-0z

Salvador-BAImplante Way Produtos Médicos-Odontológicos LtdaPhone: 0800 284 5378 / Fax: (71) 3351-5378 Rua Senador Theotônio Vilela, 190 Ed. Convention Center , SL 506 - Pq Bela Vista BACEP 40279-435

ArgentinaHorácio Y Norberto CalamanteSanta Fé 31532000 RosarioPhone: 54 341 438 [email protected]

ChileComercial Express DentRut 78.378.3160-3 Av. Presidente Errazuriz 4125Las Condes – Santiago - ChilePhone: 56 2 233 6690/ 56 2 263 [email protected]

ColombiaNeoimplants Colômbia Ltda.Calle 119 N. 14 A - 25 Ofic. 107 - BogotáPhone: 752 151 560 17595 [email protected]

SpainP.D. Per, S.LCristóbal De Boleda, 1425006 - LleidaPhone: 34 9021 17077/ 9021 [email protected]

ItalyBio-sferaVia C. Pavese, 50Peschiera Borromeo – MiPhone: 39 349 224 [email protected]

LebanonImplanet Dekwaneh Slaf Main Road Yervan Bldg - BeirutPhone: 961 169 [email protected]

MoroccoSarl Innov MatSect 2, Rue Al Missouak Nr 20Hay Riad - RabatPhone: 212 37 680892 / 212 61 [email protected]

ParaguayD & D Distribuidora S.ACap. Lezcano Esq PascualToledo 2321 Ruc 80025797-9 - Asunción Phone: 595 21 310 [email protected]

DominicanRepublicDeposito Dental Idemefa S/aCalle Pedro A Bobea, Esq. Primera, Bella VistaSanto DomingoPhone: 809 535 [email protected]

TaiwanHanns Dental Suply Company 2f 50 Fuxing N Road, 10488 Taipei - Taiwan Rov Phone: 852 254 01158 [email protected]

VenezuelaDental El BosqueAv. Universitaria Resd Diamante Local P.B.Valle Abajo - Caracas Phone: 58 212-6614280 / 6617790 / [email protected]

INTERNATIONALDISTRIBUTORS

AFFILIATES

neodent catalog of products

Documents

new industrial complex

complete materials laboratory

use of materials

continuous development

intellectual development

human beings

human standards

sport courts