navy training system plan - globalsecurity.org · navy training system plan ... ° ndi practical...

NAVY TRAINING SYSTEM PLAN

FOR THE

NAVAIR AVIATION SPECIAL SKILLS

TRAINING PROGRAM

N78-NTSP-A-50-0010/A

FEBRUARY 2002

N78-NTSP-A-50-0010/A

February 2002

NAVAIR AVIATION SPECIAL SKILLS TRAINING PROGRAM

i

EXECUTIVE SUMMARY

Naval Air Systems Command (NAVAIR) Special Skills Training has been available sincethe 1970s and is currently available at four Naval training sites around the country. Two NavalAviation Depots (NADEP) on the East Coast are located at Naval Air Station (NAS)Jacksonville, Florida, and Marine Corps Air Station Cherry Point, North Carolina. A third EastCoast training site is located at the Norfolk Naval Shipyard in Portsmouth, Virginia. OneNADEP on the West Coast is located at NAS North Island, California.

NAVAIR Aviation Special Skills Training is performed by civilian Wage Grade LeadInstructor personnel assigned to the various activities and is available to active duty and reservemilitary personnel from the United States Navy, Marine Corps, Air Force, and Army. Studentsare assigned by their respective detailers, or a classroom quota can be requested directly from thetraining activity.

The courses are primarily established for the use of Naval Aviation Fleet maintenancepersonnel. However, they may be utilized by other Department of Defense (DoD) personnel on aspace available basis with no instructional cost to the user. Inputs from other DoD agenciesbeyond space available or requiring additional resources will be accepted subject to priorarrangement for inter-service support.

Instructor manpower for these four training sites is currently in place and there is norequirement for this manpower to change.

Historically, training equipment procurement, replacement, and upgrade requirementshave been issues. Equipment has been borrowed, and in some cases, has been in short supply,which has significantly impacted the quality of training. The current plan is to provide all requiredequipment to each training activity to ensure quality training is available. This is the first NavyTraining System Plan (NTSP) for the NAVAIR Aviation Special Skills Training Program andupdates to this NTSP will track progress in attaining the required equipment.

N78-NTSP-A-50-0010/A

February 2002


ii

TABLE OF CONTENTS

PageExecutive Summary........................................................................................................... iList of Acronyms............................................................................................................... iiiPreface.............................................................................................................................. vi

PART I - TECHNICAL PROGRAM DATA

A. Nomenclature-Title-Program .......................................................................... I-1

B. Security Classification .................................................................................... I-1

C. Manpower, Personnel, and Training Principals................................................ I-1

D. System Description......................................................................................... I-1

E. Developmental Test and Operational Test....................................................... I-2

F. Aircraft and/or Equipment/System/Subsystem Replaced ................................. I-2

G. Description of New Development ................................................................... I-2

H. Concepts ........................................................................................................ I-2

1. Operational ............................................................................................. I-22. Maintenance............................................................................................ I-23. Manning.................................................................................................. I-24. Training .................................................................................................. I-2

I. Onboard (In-Service) Training........................................................................ I-12

J. Logistics Support ........................................................................................... I-13

K. Schedules ....................................................................................................... I-14

L. Government-Furnished Equipment and Contractor-Furnished Equipment

Training Requirements.................................................................................... I-15

M. Related NTSPs and Other Applicable Documents ........................................... I-15

PART II - BILLET AND PERSONNEL REQUIREMENTS ................................... II-1

PART III - TRAINING REQUIREMENTS................................................................ III-1

PART IV - TRAINING LOGISTICS SUPPORT REQUIREMENTS....................... IV-1

PART V - MPT MILESTONES................................................................................. V-1

PART VI - DECISION ITEMS/ACTION REQUIRED ............................................. VI-1

PART VII - POINTS OF CONTACT ........................................................................... VII-1

N78-NTSP-A-50-0010/A

February 2002


iii

LIST OF ACRONYMS

ACDU Active DutyAIMD Aircraft Intermediate Maintenance DepartmentAM Aviation Structural MechanicAMTCS Aviation Maintenance Training Continuum SystemAOB Average OnboardAR Active Reserve (USMC)AS Aviation Support Equipment TechnicianASM AMTCS Software ModuleATIR Annual Training Input Requirement

CAI Computer-Aided InstructionCFE Contractor Furnished EquipmentCFY Current Fiscal YearCIN Course Identification NumberCMC Commandant of the Marine CorpsCMI Computer-Managed InstructionCNET Chief of Naval Education and TrainingCNO Chief of Naval OperationsCOTS Commercial Off-The-Shelf

DCIVN Department of Defense CivilianDoD Department of Defense

ECR Electronic ClassroomETJ Electronic Training Jacket

FMS Foreign Military SalesFTD Fleet Training DeviceFY Fiscal Year

GFE Government Furnished EquipmentGMAW Gas Metal Arc WeldingGPETE General Purpose Electronic Test EquipmentGPTE General Purpose Test Equipment

ICW Interactive Courseware

N78-NTSP-A-50-0010/A

February 2002


iv

LIST OF ACRONYMS

IMI Interactive Multimedia Instruction

LRC Learning Resource Center

MATMEP Maintenance Training Management and Evaluation ProgramMCAS Marine Corps Air StationMCCDC Marine Corps Combat Development CommandMOS Military Occupational SpecialtyMTIP Maintenance Training Improvement ProgramMTL Master Task List

NA Not ApplicableNADEP Naval Aviation DepotNAMP Naval Aviation Maintenance ProgramNAMTRAGRU DET Naval Air Maintenance Training Group DetachmentNAMTRAU Naval Air Maintenance Training UnitNAS Naval Air StationNAVAIR Naval Air Systems CommandNAVAIRINST Naval Air Systems Command InstructionNAVAIRSYSCOM Naval Air Systems CommandNDI Non-Destructive InspectionNEC Navy Enlisted ClassificationNTSP Navy Training System Plan

OPO OPNAV Principal OfficialOPNAV Office of the Chief of Naval OperationsOPNAVINST Office of the Chief of Naval Operations Instruction

PC Personal ComputerPDA Principal Developing AgencyPFY Previous Fiscal YearPMA Program Manager, Air

RFT Ready For Training

SELRES Selected ReserveSPETE Special Purpose Electronic Test Equipment

N78-NTSP-A-50-0010/A

February 2002


v

LIST OF ACRONYMS

SPTE Special Purpose Test EquipmentST Special Tool

TAR Training and Administration of the Naval ReserveTD Training DeviceTEV Test and EvaluationTSA Training Support AgencyTTE Technical Training Equipment

USMC United States Marine CorpsUSN United States Navy

N78-NTSP-A-50-0010/A

February 2002


vi

PREFACE

This Approved Navy Training System Plan (NTSP) updates the Draft NTSP, N78-NTSP-A-50-0010/D, dated July 2001. The Naval Air Systems Command (NAVAIR) Aviation SpecialSkills Training Program has been available for 30 years, but no NTSP was ever written. All of therequirements of the NAVAIR Aviation Special Skills Training Program have been identified andall required manpower and training are currently in place. This NTSP was written to documentthose requirements and identify current training equipment shortfalls.

This NTSP has been written to comply with guidelines set forth in the Navy TrainingRequirements Documentation Manual, Office of the Chief of Naval Operations (OPNAV)Publication P-751-1-9-97.

I-1

N78-NTSP-A-50-0010/AFebruary 2002

PART I - TECHNICAL PROGRAM DATA

A. NOMENCLATURE-TITLE-PROGRAM

1. Nomenclature-Title-Acronym. NAVAIR Aviation Special Skills Training Program

2. Program Element. Not Assigned

B. SECURITY CLASSIFICATION

1. System Characteristics ................. Unclassified2. Capabilities ................................... Unclassified3. Functions....................................... Unclassified

C. MANPOWER, PERSONNEL, AND TRAINING PRINCIPALS

OPNAV Principal Official (OPO) Program Sponsor.................................... CNO (N789)

OPO Resource Sponsor .............................................................................. CNO (N781)

Developing Agency......................................................... NAVAIRSYSCOM (PMA205)

Training Agency ............................................................. NAVAIRSYSCOM (PMA205)

Training Support Agency................................................ NAVAIRSYSCOM (PMA205)

Curriculum Control Authority.........................................NAVAIRSYSCOM (AIR 3.4.6)

Marine Corps Force Structure...................................................................MCCDC (C53)

D. SYSTEM DESCRIPTION

1. Operational Uses. The purpose of the NAVAIR Aviation Special Skills TrainingProgram is to provide adequate numbers of personnel in the Navy, Marine Corps, Army, and AirForce with the capabilities provided by this training.

2. Foreign Military Sales. Training of foreign military maintenance personnel may beaccomplished when arranged and funded in accordance with instructions governing ForeignMilitary Sales (FMS).

I-2

E. DEVELOPMENTAL TEST AND OPERATIONAL TEST. Not Applicable (NA)

F. AIRCRAFT AND/OR EQUIPMENT/SYSTEM/SUBSYSTEM REPLACED. NA

G. DESCRIPTION OF NEW DEVELOPMENT

1. Functional Description. Naval Air Systems Command Instruction (NAVAIRINST)1500.2 series establishes policy and procedures for providing training courses for the special skillstraining of aviation maintenance fleet and shore-based personnel. Under the management ofNaval Air Systems Command (NAVAIRSYSCOM) AIR 3.4.6, these courses providesupplemental training, but do not duplicate courses available at Naval Aviation MaintenanceTraining Group Detachments (NAMTRAGRU DET), Naval Aviation Maintenance Training Units(NAMTRAU), Fleet Readiness Squadrons, and other designated maintenance trainingorganizations. Since this is essentially a training program, its functional description is morethoroughly developed in paragraph H.4, Training Concept, below.

2. Physical Description. NA

3. New Development Introduction. NA

4. Significant Interfaces. NA

5. New Features, Configurations, or Material. NA

H. CONCEPTS

1. Operational Concept. NA

2. Maintenance Concept. NA

3. Manning Concept. Instructor manpower for the NAVAIR Aviation Special SkillsTraining Program is available from the four participating training activities. Instructor personnelare chosen from civilian Department of Defense (DoD) Wage Grade Lead Instructor personnel.These are senior, highly knowledgeable and skilled individuals from each area of expertise at eachtraining activity. All Instructor personnel have attended Instructor Training and are qualified toinstruct.

4. Training Concept. Training for the NAVAIR Aviation Special Skills TrainingProgram is available upon request from the applicable training activity or through the AviationMaintenance Detailers. All training courses are not available at every training activity. Refer toSchedules (paragraph K.1 of this document) for a complete listing of available Aviation SpecialSkills Training.

a. Initial Training. NA

I-3

b. Follow-on Training. Follow-on training for the NAVAIR Aviation SpecialSkills Training Program is provided by four training activities across the country. On the EastCoast, training is provided by three activities:

° Norfolk Naval Shipyard, Portsmouth, Virginia° Naval Aviation Depot (NADEP) Cherry Point, North Carolina° NADEP Jacksonville, Florida

On the West Coast training is provided by:

° NADEP North Island, California

Class quotas are controlled by Aviation Ratings Detailers and by the particulartraining activity. Seats are set aside for both methods of scheduling. The courses are primarilyestablished for the use of Naval Aviation Fleet maintenance personnel. They may be provided toother DoD personnel on a space available basis at no cost to the user. Inputs from other DoDagencies beyond space available or requiring additional instructional resources will be acceptedsubject to prior arrangement for inter-service support. The individual NAVAIR Aviation SpecialSkills Training courses are listed as follows:

Title .................... Non-Destructive Inspection Technician Recertification

CIN ..................... N-701-0005

Model Manager ... NAVAIRSYSCOM, AIR 3.4.6

Description .......... This course provides the Non-Destructive Inspection(NDI) Technician with re-certification through a review of:

° NDI Theory° NDI Practical Application of Liquid Penetrant° Magnetic Particle Inspection° Eddy Current Testing° Ultrasonic Testing° Radiography Inspection° Applicable Publications, including the Naval Aviation

Maintenance Program (NAMP), Office of the Chief ofNaval Operations Instruction (OPNAVINST) 4790.2series

Upon completion, the student will be re-certified toperform as an NDI Technician at the organizational andintermediate levels of maintenance.

Locations............. ° Norfolk Naval Shipyard° NADEP Cherry Point° NADEP Jacksonville° NADEP North Island

I-4

Length ................. 12 days

RFT date ............. Currently available

Skill identifier....... NA

TTE/TD............... Technical Training Equipment (TTE) is listed in elementIV.A.1. There are no Training Devices (TD).

Prerequisite.......... ° Senior Aviation Structural Mechanic (AM) 7225or

° United States Marine Corps (USMC) MilitaryOccupational Specialty (MOS) 6044

Title .................... Non-Destructive Inspection Technician Specific Task

CIN ..................... N-701-0006


Description .......... This course provide the NDI Technician with re-certification through a review of:

° NDI Theory° NDI Practical Application of Liquid Penetrant° Magnetic Particle Inspection° Eddy Current Testing° Ultrasonic Testing° Radiography Inspection° Applicable Publications, including the NAMP

Upon completion, the student will be certified to performas an experienced NDI Technician at the organizational andintermediate levels of maintenance.


Length ................. 1 day


Skill identifier....... ° Senior AM 7225or

° USMC MOS 6044

TTE/TD............... TTE is listed in element IV.A.1. TD is NA.

Prerequisite.......... Must be approved by Aircraft Controlling Custodian

I-5

Title .................... Aircraft/Support Equipment Basic WeldingCertification

CIN ..................... N-701-0007


Description .......... This course provides formal training, practical instruction,and certification in:

° Metallurgical Properties° Physical Properties° Mechanical Properties° Basic Welding Using the Gas Tungsten Arc Welding

Process on Aluminum Alloys° Steel Alloys° Precipitating Hardening Nickel Based Alloys

Upon completion, the student will be certified to do basicwelding at the organizational and intermediate levels ofmaintenance.


Length ................. 54 days


Skill identifier....... ° Senior AM° Senior Aviation Support Equipment Technician (AS)° MOS 6043


Prerequisites ........ ° United States Navy (USN): 12 months in rate training, E-4 through E-6

° USMC: 12 months in MOS training, E-3 through E-7

I-6

Title .................... Aircraft/Support Equipment Basic WeldingRecertification

CIN ..................... N-701-0008


Description .......... This course provides formal training, practical instruction,and certification in:

° Metallurgical Properties° Physical Properties° Mechanical Properties° Basic Welding using the Gas Tungsten Arc Welding

Process on Aluminum Alloys° Steel Alloys° Precipitating Hardening Nickel Based Alloys

Upon completion, the student will be re-certified toperform Basic Welding at the organizational andintermediate levels of maintenance.


Length ................. 5 days




Prerequisites ........ ° N-701-0007, Aircraft Support Equipment Basic Welding° Must possess a current welding certificate in the

appropriate category

I-7

Title .................... Oxyfuel/Shielded Metal Arc Welder Certification

CIN ..................... N-701-0009


Description .......... This course provides formal training, practical instruction,and certification in Oxyfuel and Shielded Metal ArcWelding using:

° Oxyfuel Welding Process° Shielded Metal Arc Welding Process° Silver Brazing Process° Proper Metal Preparation

Upon completion, the student will be certified to performOxyfuel and Shielded Metal Arc Welding at theorganizational and intermediate levels of maintenance.


Length ................. 19 days


Skill identifier....... ° Senior AS 7222° Senior AM 7222° Senior Hull Technician 7222° Senior Machinery Repairman 7222° MOS 6043


Prerequisites ........ ° USN: 12 months in rate training, E-4 through E-6° USMC: 12 months in MOS training, E-3 through E-7

I-8

Title .................... Oxyfuel/Shielded Metal Arc Welder Recertification

CIN ..................... N-701-0010


Description .......... This course provides formal training, practical instruction,and recertification in Oxyfuel and Shielded Metal ArcWelding using:

° Oxyfuel Welding Process° Shielded Metal Arc Welding Process° Silver Brazing Process° Proper Metal Preparation

Upon completion, the student will be re-certified toperform Oxyfuel and Shielded Metal Arc Welding at theorganizational and intermediate levels of maintenance.


Length ................. 5 days




Prerequisite.......... ° N-701-0009, Oxyfuel/Shielded Metal Arc WelderCertification

° Must possess a current welding certificate in theappropriate category

I-9

Title .................... Aircraft Corrosion Control

CIN ..................... N-701-0013


Description .......... This course provides knowledge and understanding of themethods, techniques, and procedures for:

° Corrosion Detection° Corrosion Identification° Corrosion Treatment° Corrosion Prevention° Proper Use of Tools, Equipment, and Materials° Application of Paints, Sealants, and Preservatives

Upon completion, the student will be able to perform as aCorrosion Control Team Member.

Locations............. ° NADEP Cherry Point° NADEP Jacksonville° NADEP North Island

Length ................. 5 days




Prerequisite.......... ° Any Aviation Maintenance Rating° Completed “A” School after April 1992

Or° C-600-3180, General Corrosion Control

I-10

Title .................... Aircraft Paint Touch Up and Markings

CIN ..................... N-701-0014


Description .......... This course provides formal training and practicalexperience in the methods and techniques of aircraftpainting, including:

° Aircraft Paint Inspection° Aircraft Paint Repair° Aircraft Paint Refinishing° Applying Primers, Decals, and Stencils° Layout and Application of Aircraft Markings and

Insignia° Painting Safety Factors° Paint Storage

Upon completion, the student will be capable of performingaircraft painting and applying markings at theorganizational level of maintenance.

Locations............. ° NADEP Cherry Point° NADEP Jacksonville° NADEP North Island

Length ................. 12 days




Prerequisite.......... ° AM or AS° N-701-0013, Aircraft Corrosion Control

or° C-600-3183, Aircraft Corrosion Control

I-11

Title .................... Gas Metal Arc Welding Certification

CIN ..................... N-701-0025


Description .......... This course provides formal training, practical instruction,and certification in Gas Metal Arc Welding (GMAW)including:

° The Fundamentals of GMAW° The GMAW Process° The Physical Properties of GMAW Equipment° The Mechanical Properties of GMAW Equipment° Repair Requirements and Limits° GMAW Procedures and Techniques° Safety Requirements° Applicable Publications

Upon completion, the student will be certified to performGMAW at the organizational and intermediate levels ofmaintenance.

Locations............. ° NADEP Cherry Point° NADEP North Island

Length ................. 19 days




Prerequisite.......... ° USN: 12 months in rate training, E-4 through E-6° USMC: 12 months in MOS training, E-3 through E-7

c. Student Profiles

SKILLIDENTIFIER

PREREQUISITESKILL AND KNOWLEDGE REQUIREMENTS

MOS 6043 ° D/E-603-4007, Airframes Intermediate Maintenance° C-603-0176, Aviation Structural Mechanic (Structures Hydraulics)

Intermediate Level Strand Class A1° C-603-0175, Aviation Structural Mechanic (Structures Hydraulics) Class A1

I-12

SKILLIDENTIFIER

PREREQUISITESKILL AND KNOWLEDGE REQUIREMENTS

MOS 6044 ° D/E-603-4007, Airframes Intermediate Maintenance° C-603-3191, Naval Aircraft Non-Destructive Inspection Technician Class C1° C-603-0176, Aviation Structural Mechanic (Structures Hydraulics)


AS ° C-602-2026, Aviation Support Equipment Technician Class A1

AM 7222 ° D/E-603-4007, Airframes Intermediate Maintenance° C-603-0176, Aviation Structural Mechanic (Structures Hydraulics)


AM 7225 ° D/E-603-4007, Airframes Intermediate Maintenance° C-603-3191, Naval Aircraft Non-Destructive Inspection Technician Class C1° C-603-0176, Aviation Structural Mechanic (Structures Hydraulics)


d. Training Pipelines. NA

I. ONBOARD (IN-SERVICE) TRAINING. Onboard training will continue when the studentreturns to their activity and performs the actual work under the supervision of personnel withmore experience in this skill. This training will imprint the procedures and precautions furtherinto the student’s knowledge base.

1. Proficiency or Other Training Organic to the New Development. NA

a. Maintenance Training Improvement Program. NA

b. Aviation Maintenance Training Continuum System. Aviation MaintenanceTraining Management System (AMTCS) will provide career path training to the Sailor or Marinefrom their initial service entry to the end of their military career. AMTCS concepts will providean integrated system that will satisfy the training and administrative requirements of both theindividual and the organization. The benefits will be manifested in the increased effectiveness ofthe technicians and the increased efficiencies of the management of the training business process.Where appropriate, capitalizing on technological advances and integrating systems and processescan provide the right amount of training at the right time, thus meeting the CNO’s mandated“just-in-time” training approach.

I-13

Technology investments enable the development of several state-of-the-art trainingand administrative tools: Interactive Multimedia Instruction (IMI) for the technicians in the Fleetin the form of Interactive Courseware (ICW) with Computer Managed Instruction (CMI) andComputer Aided Instruction (CAI) for the schoolhouse.

Included in the AMTCS development effort is the Aviation Maintenance TrainingContinuum System - Software Module, which provides testing [Test and Evaluation], recording[Electronic Certification Qualification Records], and a Feedback system. The core functionalityof these AMTCS tools are based and designed around the actual maintenance-related tasks thetechnicians perform, and the tasks are stored and maintained in a Master Task List data bank.These tools are procured and fielded with appropriate Commercial-Off-The-Shelf (COTS)hardware and software, i.e., Fleet Training Devices - Laptops, Personal Computers (PC),Electronic Classrooms, Learning Resource Centers (LRC), operating software, and networksoftware and hardware.

Upon receipt of direction from OPNAV (N789H), AMTCS concepts are to beimplemented and the new tools integrated into the daily training environment of all participatingaviation activities and supporting elements. AMTCS will serve as the standard training system foraviation maintenance training within the Navy and Marine Corps, and is planned to supersede theexisting Maintenance Training Improvement Program (MTIP) and Maintenance TrainingManagement and Evaluation Program (MATMEP) programs.

2. Personnel Qualification Standards. NA

3. Other Onboard or In-Service Training Packages. NA

J. LOGISTICS SUPPORT

1. Manufacturer and Contract Numbers. NA

2. Program Documentation. NA

3. Technical Data Plan. There are no technical manuals specifically for the NAVAIRAviation Special Skills Training Program. Technical Manuals required for this training come fromvarious existing aircraft and Navy technical manuals. For a complete list of technical manuals bycourse, refer to element IV.B.3 of this document.

4. Test Sets, Tools, and Test Equipment. All test sets, tools, and test equipmentrequired for the NAVAIR Aviation Special Skills Training Program are listed in element IV.A.1of this document.

5. Repair Parts. NA

6. Human Systems Integration. NA

I-14

K. SCHEDULES

1. Installation and Delivery Schedules. The stand-up dates of the NAVAIR AviationSpecial Skills Training are listed below by training activity.

RFT SCHEDULE BY COURSE BY NADEP

CIN, COURSE TITLE

NADEPNORTHISLAND

NORFOLKNAVAL

SHIPYARD

NADEPJACKSON-

VILLE

NADEPCHERRY

POINT

N-701-0005Non-Destructive InspectionTechnician Recertification

Jan 83 Sep 96 Oct 87 Oct 83

N-701-0006Non-Destructive InspectionTechnician Specific Task

Jan 82 Sep 96 Oct 87 Oct 83

N-701-0007Aircraft/Support EquipmentBasic Welding Certification

Oct 80 Apr 96 Oct 87 Jul 86

N-701-0008Aircraft/Support EquipmentBasic Welding Recertification

Oct 80 Apr 96 Oct 87 Jul 86

N-701-0009Oxyfuel/Shielded Metal ArcWelder Certification

Nov 82 Apr 96 May92 Jul 86

N-701-0010Oxyfuel/Shielded Metal ArcWelder Recertification

Nov 82 Apr 96 May 92 Jul 86

N-701-0013Aircraft Corrosion Control

Jan 92 NA Nov 77 Jan 84

N-701-0014Aircraft Paint Touch Up andMarkings

Jan 92 NA Jan 73 Oct 83

N-701-0025Gas Metal Arc WeldingCertification

Mar 96 NA NA Apr 94

I-15

2. Ready For Operational Use Schedule. NA

3. Time Required to Install at Operational Sites. NA

4. Foreign Military Sales and Other Source Delivery Schedule. NA

5. Training Device and Technical Training Equipment Delivery Schedule. TTE forthe NAVAIR Aviation Special Skills Training Program is listed in element IV.A.1 of this NTSP.There are no TDs for the NAVAIR Aviation Special Skills Training Program.

Historically, due to funding complexities, TTE procurement, replacement, and upgraderequirements have been a problem area in the NAVAIR Aviation Special Skills Training Program.In accordance with financial documentation, the appropriate NAVAIR Program Office shouldprovide support equipment used in this training program. Communications between variousNAVAIR codes and offices has not resolved areas of responsibility. With the Aviation SpecialSkills training being physically located at NADEP facilities, misunderstandings of areas ofresponsibility are further complicated due to NADEPs being Working Capital Funded activities.TTE being in short supply, and/or of an obsolete model, significantly impacts the quality oftraining. In cases where noted in Part IV as TBD, TTE has been borrowed predominately from,but not limited to, the local Aircraft Intermediate Maintenance Department (AIMD).NAVAIRSYSCOM (AIR 3.4.6) has been evaluating the situations to determine appropriateactions necessary to alleviate current TTE shortfalls. The current plan is to provide all requiredequipment to each training activity to ensure continuous quality training is available. Updates tothis NTSP will track progress in attaining the required equipment.

L. GOVERNMENT-FURNISHED EQUIPMENT AND CONTRACTOR-FURNISHEDEQUIPMENT TRAINING REQUIREMENTS. NA

M. RELATED NTSPs AND OTHER APPLICABLE DOCUMENTS

DOCUMENTOR NTSP TITLE

DOCUMENTOR NTSP NUMBER

PDACODE STATUS

Aviation Maintenance Personnel Trainingby Naval Aviation Depots

NAVAIRINST 1500.2(series)

PMA205 ApprovedDec 98

Naval Aviation Maintenance Program OPNAVINST 4790.2(series)

N789H ApprovedFeb 98

II - 1

PART II - BILLET AND PERSONNEL REQUIREMENTS

The following elements are not affected by the NAVAIR Aviation Special Skills Training and, therefore, are not included in PartII of this NTSP:

II.A. Billet Requirements

II.A.1.b. Billets Required for Operational and Fleet Support Activities

II.A.1.c. Total Billets Required for Operational and Fleet Support Activities

II.A.2.a. Operational and Fleet Support Activity Deactivation Schedule

II.A.2.b. Billets to be Deleted in Operational and Fleet Support Activities

II.A.2.c. Total Billets to be Deleted in Operational and Fleet Support Activities

II - 2

PART II - BILLET AND PERSONNEL REQUIREMENTS

II.A. BILLET REQUIREMENTS

II.A.1.a. OPERATIONAL AND FLEET SUPPORT ACTIVITY ACTIVATION SCHEDULE

SOURCE: NAVAIRSYSCOM AIR 3.4.6 DATE: 01/2001

ACTIVITY, UIC PFYs CFY02 FY03 FY04 FY05 FY06

FLEET SUPPORT ACTIVITIES - NAVYNaval Aviation Depot Cherry Point 45008 1 0 0 0 0 0Naval Aviation Depot Jacksonville 39829 1 0 0 0 0 0Norfolk Naval Shipyard 49163 1 0 0 0 0 0Naval Aviation Depot North Island 39503 1 0 0 0 0 0TOTAL: 4 0 0 0 0 0

II - 3

II.A.3. TRAINING ACTIVITIES INSTRUCTOR AND SUPPORT BILLET REQUIREMENTS

NADEP instructors are Wage Grade Lead personnel, i.e., civilians who work for the government. Therefore, there are nomilitary instructors or support personnel.

II - 4

II.A.4. CHARGEABLE STUDENT BILLET REQUIREMENTS

ACTIVITY, USN/ PFYs CFY02 FY03 FY03 FY04 FY06LOCATION, UIC USMC OFF ENL OFF ENL OFF ENL OFF ENL OFF ENL OFF ENL

Naval Aviation Depot, MCAS Cherry Point, 45008NAVY 4.3 4.3 4.3 4.3 4.3 4.3USMC 10.7 10.7 10.7 10.7 10.7 10.7

Naval Aviation Depot, NAS Jacksonville, 39829NAVY 7.7 7.7 7.7 7.7 7.7 7.7USMC 1.5 1.5 1.5 1.5 1.5 1.5

Naval Aviation Depot Norfolk, Norfolk Naval Shipyard, 49163NAVY 3.5 3.5 3.5 3.5 3.5 3.5USMC 1.5 1.5 1.5 1.5 1.5 1.5

Naval Aviation Depot, NAS North Island, 39503NAVY 13.9 13.9 13.9 13.9 13.9 13.9USMC 3.0 3.0 3.0 3.0 3.0 3.0

SUMMARY TOTALS:

NAVY 29.4 29.4 29.4 29.4 29.4 29.4USMC 16.7 16.7 16.7 16.7 16.7 16.7

GRAND TOTALS:

46.1 46.1 46.1 46.1 46.1 46.1

Chargeable Student Billets are generated only when military personnel are on Permanent Change Of Station orders, i.e., en-route training. Therefore, Chargeable Student Billets are substantially less than actual student billets.

II - 5

II.A.5. ANNUAL INCREMENTAL AND CUMULATIVE BILLETS

DESIG/ PNEC/ SNEC/ BILLET CFY02 FY03 FY04 FY05 FY06RATING PMOS SMOS BASE +/- CUM +/- CUM +/- CUM +/- CUM +/- CUM

USNChargeable Student Billets ACDU and TAR

29 0 29 0 29 0 29 0 29 0 29

Total Chargeable Student Billets 29 0 29 0 29 0 29 0 29 0 29

USMCChargeable Student Billets USMC and AR

17 0 17 0 17 0 17 0 17 0 17

Total Chargeable Student Billets 17 0 17 0 17 0 17 0 17 0 17

II - 6

II.B. PERSONNEL REQUIREMENTS

II.B.1. ANNUAL TRAINING INPUT REQUIREMENTS

CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician RecertificationCOURSE LENGTH: 2.0 Weeks NAVY TOUR LENGTH: 36 MonthsATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.00

TRAINING ACDU/TAR CFY02 FY03 FY04 FY05 FY06ACTIVITY SOURCE SELRES OFF ENL OFF ENL OFF ENL OFF ENL OFF ENLNaval Aviation Depot, MCAS Cherry Point

NAVY ACDU 2 2 2 2 2USMC USMC 10 10 10 10 10

Naval Aviation Depot, NAS JacksonvilleNAVY ACDU 10 10 10 10 10

SELRES 2 2 2 2 2USMC USMC 4 4 4 4 4

AR 2 2 2 2 2Naval Aviation Depot Norfolk, Norfolk Naval Shipyard


Naval Aviation Depot, NAS North IslandNAVY ACDU 16 16 16 16 16

SELRES 4 4 4 4 4USMC USMC 8 8 8 8 8

AR 2 2 2 2 2DoD DCIVN 2 2 2 2 2

TOTAL: 90 90 90 90 90

CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific TaskCOURSE LENGTH: 0.2 Weeks NAVY TOUR LENGTH: 36 MonthsATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.00




TAR 1 1 1 1 1SELRES 1 1 1 1 1

USMC USMC 3 3 3 3 3Naval Aviation Depot Norfolk, Norfolk Naval Shipyard



TAR 1 1 1 1 1SELRES 1 1 1 1 1

USMC USMC 3 3 3 3 3DoD DCIVN 1 1 1 1 1

TOTAL: 105 105 105 105 105

II - 7


CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding CertificationCOURSE LENGTH: 8.0 Weeks NAVY TOUR LENGTH: 36 MonthsATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.16




TAR 2 2 2 2 2SELRES 2 2 2 2 2


Naval Aviation Depot Norfolk, Norfolk Naval ShipyardNAVY ACDU 15 15 15 15 15USMC USMC 5 5 5 5 5


TAR 10 10 10 10 10USMC USMC 10 10 10 10 10

TOTAL: 127 127 127 127 127

CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding RecertificationCOURSE LENGTH: 1.0 Weeks NAVY TOUR LENGTH: 36 MonthsATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.00




TAR 1 1 1 1 1SELRES 1 1 1 1 1




TAR 1 1 1 1 1SELRES 2 2 2 2 2


TOTAL: 64 64 64 64 64

II - 8


CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder CertificationCOURSE LENGTH: 3.0 Weeks NAVY TOUR LENGTH: 36 MonthsATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.06




TAR 2 2 2 2 2SELRES 3 3 3 3 3



Naval Aviation Depot, NAS North IslandNAVY ACDU 8 8 8 8 8USMC USMC 8 8 8 8 8

TOTAL: 82 82 82 82 82

CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder RecertificationCOURSE LENGTH: 1.0 Weeks NAVY TOUR LENGTH: 36 MonthsATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.00




TAR 1 1 1 1 1SELRES 2 2 2 2 2




TAR 2 2 2 2 2SELRES 3 3 3 3 3


TOTAL: 50 50 50 50 50

II - 9


CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion ControlCOURSE LENGTH: 1.0 Weeks NAVY TOUR LENGTH: 36 MonthsATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.00




TAR 4 4 4 4 4SELRES 4 4 4 4 4



TAR 5 5 5 5 5SELRES 10 10 10 10 10


TOTAL: 572 572 572 572 572

CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and MarkingsCOURSE LENGTH: 2.0 Weeks NAVY TOUR LENGTH: 36 MonthsATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.00




TAR 6 6 6 6 6SELRES 10 10 10 10 10

USMC USMC 15 15 15 15 15DOD DCIVN 6 6 6 6 6


TAR 10 10 10 10 10SELRES 20 20 20 20 20


TOTAL: 420 420 420 420 420

II - 10


CIN, COURSE TITLE: N-701-0025, Gas Metal Arc Welding CertificationCOURSE LENGTH: 3.0 Weeks NAVY TOUR LENGTH: 36 MonthsATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.06


NAVY ACDU 5 5 5 5 5TAR 1 1 1 1 1

USMC USMC 9 9 9 9 9Naval Aviation Depot, NAS North Island


TOTAL: 21 21 21 21 21

III - 1

PART III - TRAINING REQUIREMENTS

The following elements are not affected by the NAVAIR Aviation Special Skills Training Program and, therefore, are notincluded in Part III of this NTSP:

III.A.1. Initial Training Requirements

III.A.2. Follow-on Training

III.A.2.b. Planned Courses

III.A.2.c. Unique Courses

III.A.3. Existing Training Phased Out

III - 2

III.A.2. FOLLOW-ON TRAINING

III.A.2.a. EXISTING COURSES

CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: MCAS Cherry Point, 45008

SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR

CFY02 FY03 FY04 FY05 FY06 OFF ENL OFF ENL OFF ENL OFF ENL OFF ENL

2 2 2 2 2 ATIR2 2 2 2 2 Output

0.1 0.1 0.1 0.1 0.1 AOB0.1 0.1 0.1 0.1 0.1 Chargeable

SOURCE: USMC STUDENT CATEGORY: USMC - AR


10 10 10 10 10 ATIR10 10 10 10 10 Output

0.3 0.3 0.3 0.3 0.3 AOB0.3 0.3 0.3 0.3 0.3 Chargeable

TRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829



10 10 10 10 10 ATIR10 10 10 10 10 Output

0.3 0.3 0.3 0.3 0.3 AOB0.3 0.3 0.3 0.3 0.3 Chargeable

SOURCE: USN STUDENT CATEGORY: SELRES


2 2 2 2 2 ATIR2 2 2 2 2 Output

0.1 0.1 0.1 0.1 0.1 AOB0.0 0.0 0.0 0.0 0.0 Chargeable



6 6 6 6 6 ATIR6 6 6 6 6 Output

0.2 0.2 0.2 0.2 0.2 AOB

III - 3

0.2 0.2 0.2 0.2 0.2 Chargeable

III - 4


TRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC: Norfolk Naval Shipyard, 49163III.A.2.a. EXISTING COURSES



14 14 14 14 14 ATIR14 14 14 14 14 Output

0.5 0.5 0.5 0.5 0.5 AOB0.5 0.5 0.5 0.5 0.5 Chargeable



14 14 14 14 14 ATIR14 14 14 14 14 Output

0.5 0.5 0.5 0.5 0.5 AOB0.5 0.5 0.5 0.5 0.5 Chargeable

TRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503



16 16 16 16 16 ATIR16 16 16 16 16 Output

0.5 0.5 0.5 0.5 0.5 AOB0.5 0.5 0.5 0.5 0.5 Chargeable

SOURCE: NAVY STUDENT CATEGORY: SELRES


4 4 4 4 4 ATIR4 4 4 4 4 Output

0.1 0.1 0.1 0.1 0.1 AOB0.0 0.0 0.0 0.0 0.0 Chargeable



10 10 10 10 10 ATIR10 10 10 10 10 Output

0.3 0.3 0.3 0.3 0.3 AOB0.3 0.3 0.3 0.3 0.3 Chargeable

III - 5


SOURCE: DoD STUDENT CATEGORY: DCIVN


2 2 2 2 2 ATIR2 2 2 2 2 Output

0.1 0.1 0.1 0.1 0.1 AOB0.0 0.0 0.0 0.0 0.0 Chargeable

CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific TaskTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: MCAS Cherry Point, 45008



4 4 4 4 4 ATIR4 4 4 4 4 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable



5 5 5 5 5 ATIR5 5 5 5 5 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable




8 8 8 8 8 ATIR8 8 8 8 8 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable



1 1 1 1 1 ATIR1 1 1 1 1 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable

III - 6




3 3 3 3 3 ATIR3 3 3 3 3 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable

TRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC: Norfolk Naval Shipyard, 49163



50 50 50 50 50 ATIR50 50 50 50 50 Output

0.1 0.1 0.1 0.1 0.1 AOB0.1 0.1 0.1 0.1 0.1 Chargeable



22 22 22 22 22 ATIR22 22 22 22 22 Output

0.1 0.1 0.1 0.1 0.1 AOB0.1 0.1 0.1 0.1 0.1 Chargeable




7 7 7 7 7 ATIR7 7 7 7 7 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable



1 1 1 1 1 ATIR1 1 1 1 1 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable

III - 7




3 3 3 3 3 ATIR3 3 3 3 3 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable



1 1 1 1 1 ATIR1 1 1 1 1 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable

CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: MCAS Cherry Point, 45008



11 11 11 11 11 ATIR11 11 11 11 11 Output

1.6 1.6 1.6 1.6 1.6 AOB1.6 1.6 1.6 1.6 1.6 Chargeable



29 29 29 29 29 ATIR29 29 29 29 29 Output

4.3 4.3 4.3 4.3 4.3 AOB4.3 4.3 4.3 4.3 4.3 Chargeable




12 12 12 12 12 ATIR12 12 12 12 12 Output

1.8 1.8 1.8 1.8 1.8 AOB1.8 1.8 1.8 1.8 1.8 Chargeable

III - 8

III - 9




2 2 2 2 2 ATIR2 2 2 2 2 Output

0.2 0.2 0.2 0.2 0.2 AOB0.0 0.0 0.0 0.0 0.0 Chargeable

SOURCE: USMC STUDENT CATEGORY: USMC - ARCFY02 FY03 FY04 FY05 FY06

OFF ENL OFF ENL OFF ENL OFF ENL OFF ENL4 4 4 4 4 ATIR4 4 4 4 4 Output

0.6 0.6 0.6 0.6 0.6 AOB0.6 0.6 0.6 0.6 0.6 Chargeable



1 1 1 1 1 ATIR1 1 1 1 1 Output

0.1 0.1 0.1 0.1 0.1 AOB0.0 0.0 0.0 0.0 0.0 Chargeable




15 15 15 15 15 ATIR15 15 15 15 15 Output

2.2 2.2 2.2 2.2 2.2 AOB2.2 2.2 2.2 2.2 2.2 Chargeable



5 5 5 5 5 ATIR5 5 5 5 5 Output

0.7 0.7 0.7 0.7 0.7 AOB0.7 0.7 0.7 0.7 0.7 Chargeable

III - 10





38 38 38 38 38 ATIR38 38 38 38 38 Output

5.6 5.6 5.6 5.6 5.6 AOB5.6 5.6 5.6 5.6 5.6 Chargeable



10 10 10 10 10 ATIR10 10 10 10 10 Output

1.5 1.5 1.5 1.5 1.5 AOB1.5 1.5 1.5 1.5 1.5 Chargeable

CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: MCAS Cherry Point, 45008



8 8 8 8 8 ATIR8 8 8 8 8 Output

0.1 0.1 0.1 0.1 0.1 AOB0.1 0.1 0.1 0.1 0.1 Chargeable



24 24 24 24 24 ATIR24 24 24 24 24 Output

0.3 0.3 0.3 0.3 0.3 AOB0.3 0.3 0.3 0.3 0.3 Chargeable

III - 11





3 3 3 3 3 ATIR3 3 3 3 3 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable



1 1 1 1 1 ATIR1 1 1 1 1 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable



1 1 1 1 1 ATIR1 1 1 1 1 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable



1 1 1 1 1 ATIR1 1 1 1 1 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable




7 7 7 7 7 ATIR7 7 7 7 7 Output

0.1 0.1 0.1 0.1 0.1 AOB0.1 0.1 0.1 0.1 0.1 Chargeable

III - 12




3 3 3 3 3 ATIR3 3 3 3 3 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable




9 9 9 9 9 ATIR9 9 9 9 9 Output

0.1 0.1 0.1 0.1 0.1 AOB0.1 0.1 0.1 0.1 0.1 Chargeable



2 2 2 2 2 ATIR2 2 2 2 2 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable



4 4 4 4 4 ATIR4 4 4 4 4 Output

0.1 0.1 0.1 0.1 0.1 AOB0.1 0.1 0.1 0.1 0.1 Chargeable



1 1 1 1 1 ATIR1 1 1 1 1 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable

III - 13


CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: MCAS Cherry Point, 45008



4 4 4 4 4 ATIR4 4 4 4 4 Output

0.1 0.1 0.1 0.1 0.1 AOB0.1 0.1 0.1 0.1 0.1 Chargeable



12 12 12 12 12 ATIR12 12 12 12 12 Output

0.2 0.2 0.2 0.2 0.2 AOB0.2 0.2 0.2 0.2 0.2 Chargeable




22 22 22 22 22 ATIR22 22 22 22 22 Output

0.3 0.3 0.3 0.3 0.3 AOB0.3 0.3 0.3 0.3 0.3 Chargeable



3 3 3 3 3 ATIR3 3 3 3 3 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable



2 2 2 2 2 ATIR2 2 2 2 2 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable

III - 14




3 3 3 3 3 ATIR3 3 3 3 3 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable




15 15 15 15 15 ATIR15 15 15 15 15 Output

0.2 0.2 0.2 0.2 0.2 AOB0.2 0.2 0.2 0.2 0.2 Chargeable



5 5 5 5 5 ATIR5 5 5 5 5 Output

0.0 0.0 0.0 0.0 0.0 AOB0.0 0.0 0.0 0.0 0.0 Chargeable




8 8 8 8 8 ATIR8 8 8 8 8 Output

0.1 0.1 0.1 0.1 0.1 AOB0.1 0.1 0.1 0.1 0.1 Chargeable



8 8 8 8 8 ATIR8 8 8 8 8 Output

0.1 0.1 0.1 0.1 0.1 AOB0.1 0.1 0.1 0.1 0.1 Chargeable

III - 15


CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: MCAS Cherry Point, 45008



6 6 6 6 6 ATIR6 6 6 6 6 Output

0.3 0.3 0.3 0.3 0.3 AOB0.3 0.3 0.3 0.3 0.3 Chargeable



6 6 6 6 6 ATIR6 6 6 6 6 Output

0.3 0.3 0.3 0.3 0.3 AOB0.3 0.3 0.3 0.3 0.3 Chargeable




7 7 7 7 7 ATIR7 7 7 7 7 Output

0.4 0.4 0.4 0.4 0.4 AOB0.4 0.4 0.4 0.4 0.4 Chargeable



2 2 2 2 2 ATIR2 2 2 2 2 Output

0.1 0.1 0.1 0.1 0.1 AOB0.0 0.0 0.0 0.0 0.0 Chargeable



2 2 2 2 2 ATIR2 2 2 2 2 Output

0.1 0.1 0.1 0.1 0.1 AOB0.1 0.1 0.1 0.1 0.1 Chargeable

III - 16




1 1 1 1 1 ATIR1 1 1 1 1 Output

0.1 0.1 0.1 0.1 0.1 AOB0.0 0.0 0.0 0.0 0.0 Chargeable




7 7 7 7 7 ATIR7 7 7 7 7 Output

0.4 0.4 0.4 0.4 0.4 AOB0.4 0.4 0.4 0.4 0.4 Chargeable



3 3 3 3 3 ATIR3 3 3 3 3 Output

0.2 0.2 0.2 0.2 0.2 AOB0.2 0.2 0.2 0.2 0.2 Chargeable




6 6 6 6 6 ATIR6 6 6 6 6 Output

0.3 0.3 0.3 0.3 0.3 AOB0.3 0.3 0.3 0.3 0.3 Chargeable



3 3 3 3 3 ATIR3 3 3 3 3 Output

0.2 0.2 0.2 0.2 0.2 AOB0.0 0.0 0.0 0.0 0.0 Chargeable

III - 17




5 5 5 5 5 ATIR5 5 5 5 5 Output

0.3 0.3 0.3 0.3 0.3 AOB0.3 0.3 0.3 0.3 0.3 Chargeable



2 2 2 2 2 ATIR2 2 2 2 2 Output

0.1 0.1 0.1 0.1 0.1 AOB0.0 0.0 0.0 0.0 0.0 Chargeable

CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion ControlTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: MCAS Cherry Point, 45008



46 46 46 46 46 ATIR46 46 46 46 46 Output

0.6 0.6 0.6 0.6 0.6 AOB0.6 0.6 0.6 0.6 0.6 Chargeable



130 130 130 130 130 ATIR130 130 130 130 130 Output1.8 1.8 1.8 1.8 1.8 AOB1.8 1.8 1.8 1.8 1.8 Chargeable





III - 18




4 4 4 4 4 ATIR4 4 4 4 4 Output

0.1 0.1 0.1 0.1 0.1 AOB0.0 0.0 0.0 0.0 0.0 Chargeable



10 10 10 10 10 ATIR10 10 10 10 10 Output

0.1 0.1 0.1 0.1 0.1 AOB0.1 0.1 0.1 0.1 0.1 Chargeable



4 4 4 4 4 ATIR4 4 4 4 4 Output

0.1 0.1 0.1 0.1 0.1 AOB0.0 0.0 0.0 0.0 0.0 Chargeable







10 10 10 10 10 ATIR10 10 10 10 10 Output

0.1 0.1 0.1 0.1 0.1 AOB0.0 0.0 0.0 0.0 0.0 Chargeable

III - 19




10 10 10 10 10 ATIR10 10 10 10 10 Output

0.1 0.1 0.1 0.1 0.1 AOB0.1 0.1 0.1 0.1 0.1 Chargeable



5 5 5 5 5 ATIR5 5 5 5 5 Output

0.1 0.1 0.1 0.1 0.1 AOB0.0 0.0 0.0 0.0 0.0 Chargeable

CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and MarkingsTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: MCAS Cherry Point, 45008



36 36 36 36 36 ATIR36 36 36 36 36 Output

1.2 1.2 1.2 1.2 1.2 AOB1.2 1.2 1.2 1.2 1.2 Chargeable



92 92 92 92 92 ATIR92 92 92 92 92 Output

3.0 3.0 3.0 3.0 3.0 AOB3.0 3.0 3.0 3.0 3.0 Chargeable




81 81 81 81 81 ATIR81 81 81 81 81 Output

2.7 2.7 2.7 2.7 2.7 AOB2.7 2.7 2.7 2.7 2.7 Chargeable

III - 20




10 10 10 10 10 ATIR10 10 10 10 10 Output

0.3 0.3 0.3 0.3 0.3 AOB0.0 0.0 0.0 0.0 0.0 Chargeable



15 15 15 15 15 ATIR15 15 15 15 15 Output

0.5 0.5 0.5 0.5 0.5 AOB0.5 0.5 0.5 0.5 0.5 Chargeable



6 6 6 6 6 ATIR6 6 6 6 6 Output

0.2 0.2 0.2 0.2 0.2 AOB0.0 0.0 0.0 0.0 0.0 Chargeable







20 20 20 20 20 ATIR20 20 20 20 20 Output

0.7 0.7 0.7 0.7 0.7 AOB0.0 0.0 0.0 0.0 0.0 Chargeable

III - 21




15 15 15 15 15 ATIR15 15 15 15 15 Output

0.5 0.5 0.5 0.5 0.5 AOB0.5 0.5 0.5 0.5 0.5 Chargeable



10 10 10 10 10 ATIR10 10 10 10 10 Output

0.3 0.3 0.3 0.3 0.3 AOB0.0 0.0 0.0 0.0 0.0 Chargeable

CIN, COURSE TITLE: N-701-0025, Gas Metal Arc Welding CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: MCAS Cherry Point, 45008



6 6 6 6 6 ATIR6 6 6 6 Output

0.3 0.3 0.3 0.3 0.3 AOB0.3 0.3 0.3 0.3 0.3 Chargeable



9 9 9 9 9 ATIR9 9 9 9 9 Output

0.5 0.5 0.5 0.5 0.5 AOB0.5 0.5 0.5 0.5 0.5 Chargeable




4 4 4 4 4 ATIR4 4 4 4 4 Output

0.2 0.2 0.2 0.2 0.2 AOB0.2 0.2 0.2 0.2 0.2 Chargeable

III - 22




2 2 2 2 2 ATIR2 2 2 2 2 Output

0.1 0.1 0.1 0.1 0.1 AOB0.1 0.1 0.1 0.1 0.1 Chargeable

III - 1

PART IV - TRAINING LOGISTICS SUPPORT REQUIREMENTS

The following elements are not affected by the NAVAIR Aviation Special Skills Training Program and, therefore, are notincluded in Part IV of this NTSP:

IV.A. Training Hardware

IV.A.2. Training Devices

IV.B.1. Training Services

IV.C. Facility Requirements

IV.C.1. Facility Requirements Summary (Space/Support) by Activity

IV.C.2. Facility Requirements Detailed by Activity and Course

IV.C.3. Facility Project Summary by Program

Note: Historically, due to funding complexities, TTE procurement, replacement, and upgrade requirements have been aproblem area in the NAVAIR Aviation Special Skills Training Program. In accordance with financial documentation, theappropriate NAVAIR Program Office should provide support equipment used in this training program. Communicationsbetween various NAVAIR codes and offices has not resolved areas of responsibility. With the Aviation Special Skills trainingbeing physically located at NADEP facilities, misunderstandings of areas of responsibility are further complicated due toNADEPs being Working Capital Funded activities. TTE being in short supply and/or of an obsolete model significantly impactsthe quality of training. In cases where noted below as TBD, TTE has been borrowed predominately from, but not limited to, thelocal AIMD. NAVAIRSYSCOM (AIR 3.4.6) has been evaluating the situations to determine appropriate actions necessary toalleviate current TTE shortfalls. The current plan is to provide all required equipment to each training activity to ensurecontinuous quality training is available. Updates to this NTSP will track progress in attaining the required equipment.

IV - 2

PART IV - TRAINING LOGISTICS SUPPORT REQUIREMENTS

IV.A. TRAINING HARDWARE

IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE


ITEM EQUIPMENT / QTY DATE GFENO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS

GPTE

201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Oct 83 GFE TBD

ST301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Oct 83 GFE TBD

302 X-Ray Densiometer (Part # 301) 1 Oct 83 GFE TBD

303 Portable Magnetic Inspection Unit (Part # DA-200) 1 Oct 83 GFE TBD

304 X-Ray Illuminator (Part # 65-D4) 1 Oct 83 GFE TBD

305 Expandable Hole Probe Kit (Part # NEC-8031) 1 Oct 83 GFE TBD

306 Light Source Microscope (Part # 190-1) 1 Oct 83 GFE TBD

SPETE601 Radiac-meter (Part # IM-231/CDP) 2 Oct 83 GFE TBD

602 Ultrasonic Test Set (Part # USN-52) 2 Oct 83 GFE TBD

603 Electronic Metal Flaw Detector (Part # PD-214) 2 Oct 83 GFE TBD

604 Ultrasonic Transducer Test Probe (Part # PD238) 1 Oct 83 GFE TBD

605 Electrical Conductivity Tester (Part # FM-140) 1 Oct 83 GFE TBD

606 Illuminate Intensity Meter (Part # 01-434-5112) 1 Oct 83 GFE TBD

607 Ultraviolet Metals Examination Light (Part # FC-100) 1 Oct 83 GFE TBD

CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829


GPTE201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Oct 87 GFE TBD

IV - 3


ST

301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Oct 87 GFE TBD






SPETE

601 Radiac-meter (Part # IM-231/CDP) 2 Oct 87 GFE TBD







CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician RecertificationTRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC: Norfolk Naval Shipyard, 49163


GPTE201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Sep 96 GFE TBD

ST301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Sep 96 GFE TBD

302 X-Ray Densiometer (Part # 301) 1 Sep 96 GFE TBD

303 Portable Magnetic Inspection Unit (Part # DA-200) 1 Sep 96 GFE TBD

304 X-Ray Illuminator (Part # 65-D4) 1 Sep 96 GFE TBD

305 Expandable Hole Probe Kit (Part # NEC-8031) 1 Sep 96 GFE TBD

306 Light Source Microscope (Part # 190-1) 1 Sep 96 GFE TBD

IV - 4


SPETE601 Radiac-meter (Part # IM-231/CDP) 2 Sep 96 GFE TBD

602 Ultrasonic Test Set (Part # USN-52) 2 Sep 96 GFE TBD

603 Electronic Metal Flaw Detector (Part # PD-214) 2 Sep 96 GFE TBD

604 Ultrasonic Transducer Test Probe (Part # PD238) 1 Sep 96 GFE TBD

605 Electrical Conductivity Tester (Part # FM-140) 1 Sep 96 GFE TBD

606 Illuminate Intensity Meter (Part # 01-434-5112) 1 Sep 96 GFE TBD

607 Ultraviolet Metals Examination Light (Part # FC-100) 1 Sep 96 GFE TBD

CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503


GPTE201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Jan 83 GFE TBD

ST301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Jan 83 GFE TBD

302 X-Ray Densiometer (Part # 301) 1 Jan 83 GFE TBD

303 Portable Magnetic Inspection Unit (Part # DA-200) 1 Jan 83 GFE TBD

304 X-Ray Illuminator (Part # 65-D4) 1 Jan 83 GFE TBD

305 Expandable Hole Probe Kit (Part # NEC-8031) 1 Jan 83 GFE TBD

306 Light Source Microscope (Part # 190-1) 1 Jan 83 GFE TBD

SPETE601 Radiac-meter (Part # IM-231/CDP) 2 Jan 83 GFE TBD

602 Ultrasonic Test Set (Part # USN-52) 2 Jan 83 GFE TBD

603 Electronic Metal Flaw Detector (Part # PD-214) 2 Jan 83 GFE TBD

604 Ultrasonic Transducer Test Probe (Part # PD238) 1 Jan 83 GFE TBD

605 Electrical Conductivity Tester (Part # FM-140) 1 Jan 83 GFE TBD

606 Illuminate Intensity Meter (Part # 01-434-5112) 1 Jan 83 GFE TBD

607 Ultraviolet Metals Examination Light (Part # FC-100) 1 Jan 83 GFE TBD

IV - 5




GPTE

201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Oct 83 GFE TBD

ST301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Oct 83 GFE TBD






SPETE601 Radiac-meter (Part # IM-231/CDP) 2 Oct 83 GFE TBD







CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific TaskTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829


GPTE201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Oct 87 GFE TBD

IV - 6


ST

301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Oct 87 GFE TBD






SPETE

601 Radiac-meter (Part # IM-231/CDP) 2 Oct 87 GFE TBD







CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific TaskTRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC: Norfolk Naval Shipyard, 49163


GPTE201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Sep 96 GFE TBD

ST301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Sep 96 GFE TBD

302 X-Ray Densiometer (Part # 301) 1 Sep 96 GFE TBD

303 Portable Magnetic Inspection Unit (Part # DA-200) 1 Sep 96 GFE TBD

304 X-Ray Illuminator (Part # 65-D4) 1 Sep 96 GFE TBD

305 Expandable Hole Probe Kit (Part # NEC-8031) 1 Sep 96 GFE TBD

306 Light Source Microscope (Part # 190-1) 1 Sep 96 GFE TBD

IV - 7


SPETE601 Radiac-meter (Part # IM-231/CDP) 2 Sep 96 GFE TBD

602 Ultrasonic Test Set (Part # USN-52) 2 Sep 96 GFE TBD

603 Electronic Metal Flaw Detector (Part # PD-214) 2 Sep 96 GFE TBD

604 Ultrasonic Transducer Test Probe (Part # PD238) 1 Sep 96 GFE TBD

605 Electrical Conductivity Tester (Part # FM-140) 1 Sep 96 GFE TBD

606 Illuminate Intensity Meter (Part # 01-434-5112) 1 Sep 96 GFE TBD

607 Ultraviolet Metals Examination Light (Part # FC-100) 1 Sep 96 GFE TBD

CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific TaskTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503


GPTE201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Jan 82 GFE TBD

ST301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Jan 82 GFE TBD

302 X-Ray Densiometer (Part # 301) 1 Jan 82 GFE TBD

303 Portable Magnetic Inspection Unit (Part # DA-200) 1 Jan 82 GFE TBD

304 X-Ray Illuminator (Part # 65-D4) 1 Jan 82 GFE TBD

305 Expandable Hole Probe Kit (Part # NEC-8031) 1 Jan 82 GFE TBD

306 Light Source Microscope (Part # 190-1) 1 Jan 82 GFE TBD

SPETE601 Radiac-meter (Part # IM-231/CDP) 2 Jan 82 GFE TBD

602 Ultrasonic Test Set (Part # USN-52) 2 Jan 82 GFE TBD

603 Electronic Metal Flaw Detector (Part # PD-214) 2 Jan 82 GFE TBD

604 Ultrasonic Transducer Test Probe (Part # PD238) 1 Jan 82 GFE TBD

605 Electrical Conductivity Tester (Part # FM-140) 1 Jan 82 GFE TBD

606 Illuminate Intensity Meter (Part # 01-434-5112) 1 Jan 82 GFE TBD

607 Ultraviolet Metals Examination Light (Part # FC-100) 1 Jan 82 GFE TBD

IV - 8




ST307 Foot Control (Part # RFCS-14) 8 Jul 86 GFE TBD

309 Piranha Shear 1 Jul 86 GFE TBD

310 Sand Blaster Table Top (Part # BNP-55-2) 1 Jul 86 GFE TBD

311 Belt Sander 6" X 48" 2 Jul 86 GFE TBD


313 Baldor Chop Saw (Part # 12AA) 1 Jul 86 GFE TBD

314 Band Saw 1 Jul 86 GFE TBD

GPETE

608 Miller Synchro Wave (Part # 350LX) 8 Jul 86 GFE TBD

CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829


ST

307 Foot Control (Part # RFCS-14) 8 Oct 87 GFE TBD

309 Piranha Shear 1 Oct 87 GFE Onboard

310 Sand Blaster Table Top (Part # BNP-55-2) 1 Oct 87 GFE TBD

311 Belt Sander 6" X 48" 2 Oct 87 GFE TBD


313 Baldor Chop Saw (Part # 12AA) 1 Oct 87 GFE TBD

314 Band Saw 1 Oct 87 GFE TBD

GPETE608 Miller Synchro Wave (Part # 350LX) 8 Oct 87 GFE TBD

IV - 9


CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding CertificationTRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC: Norfolk Naval Shipyard, 49163


ST307 Foot Control (Part # RFCS-14) 8 Apr 96 GFE TBD

309 Piranha Shear 1 Apr 96 GFE TBD

310 Sand Blaster Table Top (Part # BNP-55-2) 1 Apr 96 GFE TBD

311 Belt Sander 6" X 48" 2 Apr 96 GFE TBD


313 Baldor Chop Saw (Part # 12AA) 1 Apr 96 GFE TBD

314 Band Saw 1 Apr 96 GFE TBD

GPETE608 Miller Synchro Wave (Part # 350LX) 8 Apr 96 GFE TBD

CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503


ST307 Foot Control (Part # RFCS-14) 8 Oct 80 GFE TBD

309 Piranha Shear 1 Oct 80 GFE TBD







IV - 10




ST307 Foot Control (Part # RFCS-14) 8 Jul 86 GFE TBD







GPETE


CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829


ST

307 Foot Control (Part # RFCS-14) 8 Oct 87 GFE TBD








IV - 11


CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding RecertificationTRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC: Norfolk Naval Shipyard, 49163


ST307 Foot Control (Part # RFCS-14) 8 Apr 96 GFE TBD

309 Piranha Shear 1 Apr 96 GFE TBD







CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503


ST307 Foot Control (Part # RFCS-14) 8 Oct 80 GFE TBD








IV - 12




ST







315 Light Duty Torches 8 Jul 86 GFE TBD

316 Acetylene Regulators (Part # AA55540-1) 8 Jul 86 GFE TBD

317 Oxygen Regulators (Part # 806-6506) 8 Jul 86 GFE TBD

318 Rod Oven (Part # 16C & 16STC) 1 Jul 86 GFE TBD

GPETE608 Miller Synchro Wave (Part # 350LX) 8 Jul 86 GFE TBD

CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829


ST309 Piranha Shear 1 May 92 GFE TBD

310 Sand Blaster Table Top (Part # BNP-55-2) 1 May 92 GFE TBD

311 Belt Sander 6" X 48" 2 May 92 GFE TBD


313 Baldor Chop Saw (Part # 12AA) 1 May 92 GFE TBD

314 Band Saw 1 May 92 GFE TBD

315 Light Duty Torches 8 May 92 GFE TBD

IV - 13


316 Acetylene Regulators (Part # AA55540-1) 8 May 92 GFE TBD

317 Oxygen Regulators (Part # 806-6506) 8 May 92 GFE TBD

318 Rod Oven (Part # 16C & 16STC) 1 May 92 GFE TBD

GPETE

608 Miller Synchro Wave (Part # 350LX) 8 May 92 GFE TBD

CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder CertificationTRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC: Norfolk Naval Shipyard, 49163


ST309 Piranha Shear 1 Apr 96 GFE TBD






315 Light Duty Torches 8 Apr 96 GFE TBD

316 Acetylene Regulators (Part # AA55540-1) 8 Apr 96 GFE TBD

317 Oxygen Regulators (Part # 806-6506) 8 Apr 96 GFE TBD

318 Rod Oven (Part # 16C & 16STC) 1 Apr 96 GFE TBD


CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503


ST309 Piranha Shear 1 Nov 82 GFE TBD

310 Sand Blaster Table Top (Part # BNP-55-2) 1 Nov 82 GFE TBD

IV - 14


311 Belt Sander 6" X 48" 2 Nov 82 GFE TBD


313 Baldor Chop Saw (Part # 12AA) 1 Nov 82 GFE TBD

314 Band Saw 1 Nov 82 GFE TBD

315 Light Duty Torches 8 Nov 82 GFE TBD

316 Acetylene Regulators (Part # AA55540-1) 8 Nov 82 GFE TBD

317 Oxygen Regulators (Part # 806-6506) 8 Nov 82 GFE TBD

318 Rod Oven (Part # 16C & 16STC) 1 Nov 82 GFE TBD

GPETE608 Miller Synchro Wave (Part # 350LX) 8 Nov 82 GFE TBD



ST309 Piranha Shear 1 Jul 86 GFE TBD






315 Light Duty Torches 8 Jul 86 GFE TBD

316 Acetylene Regulators (Part # AA55540-1) 8 Jul 86 GFE TBD

317 Oxygen Regulators (Part # 806-6506) 8 Jul 86 GFE TBD

318 Rod Oven (Part # 16C & 16STC) 1 Jul 86 GFE TBD

GPETE


IV - 15


CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829


ST

309 Piranha Shear 1 May 92 GFE TBD

310 Sand Blaster Table Top (Part # BNP-55-2) 1 May 92 GFE TBD



313 Baldor Chop Saw (Part # 12AA) 1 May 92 GFE TBD

314 Band Saw 1 May 92 GFE TBD

315 Light Duty Torches 8 May 92 GFE TBD

316 Acetylene Regulators (Part # AA55540-1) 8 May 92 GFE TBD

317 Oxygen Regulators (Part # 806-6506) 8 May 92 GFE TBD

318 Rod Oven (Part # 16C & 16STC) 1 May 92 GFE TBD

GPETE608 Miller Synchro Wave (Part # 350LX) 8 May 92 GFE TBD

CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder RecertificationTRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC: Norfolk Naval Shipyard, 49163








315 Light Duty Torches 8 Apr 96 GFE TBD

IV - 16


316 Acetylene Regulators (Part # AA55540-1) 8 Apr 96 GFE TBD

317 Oxygen Regulators (Part # 806-6506) 8 Apr 96 GFE TBD

318 Rod Oven (Part # 16C & 16STC) 1 Apr 96 GFE TBD


CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503


ST309 Piranha Shear 1 Nov 82 GFE TBD

310 Sand Blaster Table Top (Part # BNP-55-2) 1 Nov 82 GFE TBD



313 Baldor Chop Saw (Part # 12AA) 1 Nov 82 GFE TBD

314 Band Saw 1 Nov 82 GFE TBD

315 Light Duty Torches 8 Nov 82 GFE TBD

316 Acetylene Regulators (Part # AA55540-1) 8 Nov 82 GFE TBD

317 Oxygen Regulators (Part # 806-6506) 8 Nov 82 GFE TBD

318 Rod Oven (Part # 16C & 16STC) 1 Nov 82 GFE TBD

GPETE608 Miller Synchro Wave (Part # 350LX) 8 Nov 82 GFE TBD



ST319 Paint Agitator (Part # MIL-M-3070) 1 Jan 84 GFE TBD

320 Air Regulator Assembly (Part # MILS12928 CLASS1) 2 Jan 84 GFE TBD

IV - 17


321 Pneumatic Oscillating Sander (Part # A-A-2687) 2 Jan 84 GFE TBD

322 Paint Booth Filter (Part # 29-159) 10 Jan 84 GFE TBD

323 Paint Booth (Part # BD-6) 1 Jan 84 GFE TBD

324 Blast Cleaning Machine (Part # BNP-C-150-6) 1 Jan 84 GFE TBD

325 Survivair Respirator, Small (Part # 2100-00) 3 Jan 84 GFE TBD

326 Survivair Respirator, Medium (Part # 2200-00) 3 Jan 84 GFE TBD

327 Survivair Respirator, Large (Part # 2300-00) 3 Jan 84 GFE TBD

328 MSA Respirator, Small (Part # 465825) 3 Jan 84 GFE TBD

329 MSA Respirator, Medium (Part # 460968) 3 Jan 84 GFE TBD

330 MSA Respirator, Large (Part # 466486) 3 Jan 84 GFE TBD

331 Artist Air Brush (Part # B17151) 2 Jan 84 GFE TBD

332 Type III Depth Gage (Part # GGG-C-105) 10 Jan 84 GFE TBD

333 Optical Micrometer Kit (Part # 966A1) 1 Jan 84 GFE TBD

CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion ControlTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829


ST

319 Paint Agitator (Part # MIL-M-3070) 1 Nov 77 GFE TBD

320 Air Regulator Assembly (Part # MILS12928 CLASS1) 2 Nov 77 GFE TBD

321 Pneumatic Oscillating Sander (Part # A-A-2687) 2 Nov 77 GFE TBD

322 Paint Booth Filter (Part # 29-159) 10 Nov 77 GFE TBD

323 Paint Booth (Part # BD-6) 1 Nov 77 GFE TBD

324 Blast Cleaning Machine (Part # BNP-C-150-6) 1 Nov 77 GFE TBD

325 Survivair Respirator, Small (Part # 2100-00) 3 Nov 77 GFE TBD

326 Survivair Respirator, Medium (Part # 2200-00) 3 Nov 77 GFE TBD

327 Survivair Respirator, Large (Part # 2300-00) 3 Nov 77 GFE TBD

328 MSA Respirator, Small (Part # 465825) 3 Nov 77 GFE TBD

IV - 18


329 MSA Respirator, Medium (Part # 460968) 3 Nov 77 GFE TBD

330 MSA Respirator, Large (Part # 466486) 3 Nov 77 GFE TBD

331 Artist Air Brush (Part # B17151) 2 Nov 77 GFE TBD

332 Type III Depth Gage (Part # GGG-C-105) 10 Nov 77 GFE TBD

333 Optical Micrometer Kit (Part # 966A1) 1 Nov 77 GFE TBD

CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion ControlTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503



320 Air Regulator Assembly (Part # MILS12928 CLASS1) 2 Jan 92 GFE TBD

321 Pneumatic Oscillating Sander (Part # A-A-2687) 2 Jan 92 GFE TBD

322 Paint Booth Filter (Part # 29-159) 10 Jan 92 GFE TBD


324 Blast Cleaning Machine (Part # BNP-C-150-6) 1 Jan 92 GFE TBD







331 Artist Air Brush (Part # B17151) 2 Jan 92 GFE TBD

332 Type III Depth Gage (Part # GGG-C-105) 10 Jan 92 GFE TBD

333 Optical Micrometer Kit (Part # 966A1) 1 Jan 92 GFE TBD

IV - 19




ST

319 Paint Agitator (Part # MIL-M-3070) 1 Oct 83 GFE TBD

323 Paint Booth (Part # BD-6) 1 Oct 83 GFE TBD

325 Survivair Respirator, Small (Part # 2100-00) 3 Oct 83 GFE TBD

326 Survivair Respirator, Medium (Part # 2200-00) 3 Oct 83 GFE TBD

327 Survivair Respirator, Large (Part # 2300-00) 3 Oct 83 GFE TBD

328 MSA Respirator, Small (Part # 465825) 3 Oct 83 GFE TBD

329 MSA Respirator, Medium (Part # 460968) 3 Oct 83 GFE TBD

330 MSA Respirator, Large (Part # 466486) 3 Oct 83 GFE TBD

334 Air Regulator Assembly (Part # MILS12928CLASS1) 2 Oct 83 GFE TBD

336 Paint Gun Washer System (Part # 112-636) 1 Oct 83 GFE TBD

337 Airverter Paint Gun Outfit (Part # AV-001/005) 2 Oct 83 GFE TBD

338 Pro Touchup Airverter Paint Gun (Part # PT-100) 2 Oct 83 GFE TBD

CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and MarkingsTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829










IV - 20


334 Air Regulator Assembly (Part # MILS12928CLASS1) 2 Jan 73 GFE TBD

336 Paint Gun Washer System (Part # 112-636) 1 Jan 73 GFE TBD

337 Airverter Paint Gun Outfit (Part # AV-001/005) 2 Jan 73 GFE TBD

338 Pro Touchup Airverter Paint Gun (Part # PT-100) 2 Jan 73 GFE TBD

CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and MarkingsTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503










334 Air Regulator Assembly (Part # MILS12928CLASS1) 2 Jan 92 GFE TBD

336 Paint Gun Washer System (Part # 112-636) 1 Jan 92 GFE TBD

337 Airverter Paint Gun Outfit (Part # AV-001/005) 2 Jan 92 GFE TBD

338 Pro Touchup Airverter Paint Gun (Part # PT-100) 2 Jan 92 GFE TBD






IV - 21





CIN, COURSE TITLE: N-701-0025, Gas Metal Arc Welding CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503


ST309 Piranha Shear 1 Mar 96 GFE TBD

310 Sand Blaster Table Top (Part # BNP-55-2) 1 Mar 96 GFE TBD

311 Belt Sander 6" X 48" 1 Mar 96 GFE TBD

312 Belt Sander 1" X 42" 1 Mar 96 GFE TBD

313 Baldor Chop Saw (Part # 12AA) 1 Mar 96 GFE TBD

314 Band Saw 1 Mar 96 GFE TBD

IV - 22

IV.B.2. CURRICULA MATERIALS AND TRAINING AIDS


QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Oct 83 TBDCarbon Dioxide Fire Extinguisher 1 Oct 83 TBDColor Printer 1 Oct 83 TBDDesk Top Pentium III Computer 1 Oct 83 TBDInstructor Lesson Guide 3 Oct 83 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Oct 83 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Oct 83 TBDProjector (Part # MT830PLUS) 1 Oct 83 TBDProjector Screen (Part # SB-QRT-670S) 1 Oct 83 TBDStudent Guide 10 Oct 83 OnboardStudent Worksheets 10 Oct 83 Onboard

CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829


CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician RecertificationTRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC: Norfolk Naval Shipyard, 49163

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Sep 96 TBDCarbon Dioxide Fire Extinguisher 1 Sep 96 TBDColor Printer 1 Sep 96 TBDDesk Top Pentium III Computer 1 Sep 96 TBDInstructor Lesson Guide 3 Sep 96 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Sep 96 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Sep 96 TBDProjector (Part # MT830PLUS) 1 Sep 96 TBDProjector Screen (Part # SB-QRT-670S) 1 Sep 96 TBDStudent Guide 10 Sep 96 OnboardStudent Worksheets 10 Sep 96 Onboard

IV - 23


CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Jan 83 TBDCarbon Dioxide Fire Extinguisher 1 Jan 83 TBDColor Printer 1 Jan 83 TBDDesk Top Pentium III Computer 1 Jan 83 TBDInstructor Lesson Guide 3 Jan 83 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Jan 83 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jan 83 TBDProjector (Part # MT830PLUS) 1 Jan 83 TBDProjector Screen (Part # SB-QRT-670S) 1 Jan 83 TBDStudent Guide 10 Jan 83 OnboardStudent Worksheets 10 Jan 83 Onboard



CIN, COURSE TITLE: D-701-0006, Non-Destructive Inspection Technician Specific TaskTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829


IV - 24


CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific TaskTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Jan 82 TBDCarbon Dioxide Fire Extinguisher 1 Jan 82 TBDColor Printer 1 Jan 82 TBDDesk Top Pentium III Computer 1 Jan 82 TBDInstructor Lesson Guide 3 Jan 82 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Jan 82 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jan 82 TBDProjector (Part # MT830PLUS) 1 Jan 82 TBDProjector Screen (Part # SB-QRT-670S) 1 Jan 82 TBDStudent Guide 5 Jan 82 OnboardStudent Worksheets 5 Jan 82 Onboard

CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific TaskTRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC: Norfolk Naval Shipyard, 49163

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Sep 96 TBDCarbon Dioxide Fire Extinguisher 1 Sep 96 TBDColor Printer 1 Sep 96 TBDDesk Top Pentium III Computer 1 Sep 96 TBDInstructor Lesson Guide 3 Sep 96 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Sep 96 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Sep 96 TBDProjector (Part # MT830PLUS) 1 Sep 96 TBDProjector Screen (Part # SB-QRT-670S) 1 Sep 96 TBDStudent Guide 5 Sep 96 OnboardStudent Worksheets 5 Sep 96 Onboard


QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Jul 86 TBDCarbon Dioxide Fire Extinguisher 1 Jul 86 TBDColor Printer 1 Jul 86 TBDDesk Top Pentium III Computer 1 Jul 86 TBDInstructor Lesson Guide 3 Jul 86 TBDIntegrated VHS Play/Record (Part # AG-520A) 1 Jul 86 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jul 86 TBDProjector (Part # MT830PLUS) 1 Jul 86 TBDProjector Screen (Part # SB-QRT-670S) 1 Jul 86 TBDStudent Guide 14 Jul 86 OnboardStudent Worksheets 14 Jul 86 Onboard

IV - 25


CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829


CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503


CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding CertificationTRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC: Norfolk Naval Shipyard, 49163

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Apr 96 TBDCarbon Dioxide Fire Extinguisher 1 Apr 96 TBDColor Printer 1 Apr 96 TBDDesk Top Pentium III Computer 1 Apr 96 TBDInstructor Lesson Guide 3 Apr 96 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Apr 96 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Apr 96 TBDProjector (Part # MT830PLUS) 1 Apr 96 TBDProjector Screen (Part # SB-QRT-670S) 1 Apr 96 TBDStudent Guide 14 Apr 96 OnboardStudent Worksheets 14 Apr 96 Onboard

IV - 26



QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Jul 86 TBDCarbon Dioxide Fire Extinguisher 1 Jul 86 TBDDesk Top Pentium III Computer 1 Jul 86 TBDInstructor Lesson Guide 3 Jul 86 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Jul 86 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jul 86 TBDProjector (Part # MT830PLUS) 1 Jul 86 TBDProjector Screen (Part # SB-QRT-670S) 1 Jul 86 TBDStudent Guide 10 Jul 86 OnboardStudent Worksheets 10 Jul 86 Onboard

CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Oct 87 TBDCarbon Dioxide Fire Extinguisher 1 Oct 87 TBDDesk Top Pentium III Computer 1 Oct 87 TBDInstructor Lesson Guide 3 Oct 87 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Oct 87 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Oct 87 TBDProjector (Part # MT830PLUS) 1 Oct 87 TBDProjector Screen (Part # SB-QRT-670S) 1 Oct 87 TBDStudent Guide 10 Oct 87 OnboardStudent Worksheets 10 Oct 87 Onboard

CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Oct 80 TBDCarbon Dioxide Fire Extinguisher 1 Oct 80 TBDDesk Top Pentium III Computer 1 Oct 80 TBDInstructor Lesson Guide 3 Oct 80 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Oct 80 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Oct 80 TBDProjector (Part # MT830PLUS) 1 Oct 80 TBDProjector Screen (Part # SB-QRT-670S) 1 Oct 80 TBDStudent Guide 10 Oct 80 OnboardStudent Worksheets 10 Oct 80 Onboard

IV - 27


CIN, COURSE TITLE: C-701-0008, Aircraft/Support Equipment Basic Welding Recertification (Track N-701-0008)TRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC: Norfolk Naval Shipyard, 49163

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Apr 96 TBDCarbon Dioxide Fire Extinguisher 1 Apr 96 TBDDesk Top Pentium III Computer 1 Apr 96 TBDInstructor Lesson Guide 3 Apr 96 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Apr 96 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Apr 96 TBDProjector (Part # MT830PLUS) 1 Apr 96 TBDProjector Screen (Part # SB-QRT-670S) 1 Apr 96 TBDStudent Guide 10 Apr 96 OnboardStudent Worksheets 10 Apr 96 Onboard


QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Jul 86 TBDCarbon Dioxide Fire Extinguisher 1 Jul 86 TBDDesk Top Pentium III Computer 1 Jul 86 TBDInstructor Lesson Guide 3 Jul 86 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Jul 86 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jul 86 TBDProjector (Part # MT830PLUS) 1 Jul 86 TBDProjector Screen (Part # SB-QRT-670S) 1 Jul 86 TBDStudent Guide 10 Jul 86 OnboardStudent Worksheets 10 Jul 86 Onboard

CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 May 92 TBDCarbon Dioxide Fire Extinguisher 1 May 92 TBDDesk Top Pentium III Computer 1 May 92 TBDInstructor Lesson Guide 3 May 92 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 May 92 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 May 92 TBDProjector (Part # MT830PLUS) 1 May 92 TBDProjector Screen (Part # SB-QRT-670S) 1 May 92 TBDStudent Guide 10 May 92 OnboardStudent Worksheets 10 May 92 Onboard

IV - 28


CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Nov 82 TBDCarbon Dioxide Fire Extinguisher 1 Nov 82 TBDDesk Top Pentium III Computer 1 Nov 82 TBDInstructor Lesson Guide 3 Nov 82 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Nov 82 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Nov 82 TBDProjector (Part # MT830PLUS) 1 Nov 82 TBDProjector Screen (Part # SB-QRT-670S) 1 Nov 82 TBDStudent Guide 10 Nov 82 OnboardStudent Worksheets 10 Nov 82 Onboard

CIN, COURSE TITLE: C-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification (Track N-701-0009)TRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC: Norfolk Naval Shipyard, 49163

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Apr 96 TBDCarbon Dioxide Fire Extinguisher 1 Apr 96 TBDDesk Top Pentium III Computer 1 Apr 96 TBDInstructor Lesson Guide 3 Apr 96 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Apr 96 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Apr 96 TBDProjector (Part # MT830PLUS) 1 Apr 96 TBDProjector Screen (Part # SB-QRT-670S) 1 Apr 96 TBDStudent Guide 10 Apr 96 OnboardStudent Worksheets 10 Apr 96 Onboard


QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Jul 86 TBDCarbon Dioxide Fire Extinguisher 1 Jul 86 TBDColor Printer 1 Jul 86 TBDDesk Top Pentium III Computer 1 Jul 86 TBDInstructor Lesson Guide 3 Jul 86 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Jul 86 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jul 86 TBDProjector (Part # MT830PLUS) 1 Jul 86 TBDProjector Screen (Part # SB-QRT-670S) 1 Jul 86 TBDStudent Guide 10 Jul 86 OnboardStudent Worksheets 10 Jul 86 Onboard

IV - 29


CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 May 92 TBDCarbon Dioxide Fire Extinguisher 1 May 92 TBDColor Printer 1 May 92 TBDDesk Top Pentium III Computer 1 May 92 TBDInstructor Lesson Guide 3 May 92 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 May 92 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 May 92 TBDProjector (Part # MT830PLUS) 1 May 92 TBDProjector Screen (Part # SB-QRT-670S) 1 May 92 TBDStudent Guide 10 May 92 OnboardStudent Worksheets 10 May 92 Onboard

CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Nov 82 TBDCarbon Dioxide Fire Extinguisher 1 Nov 82 TBDColor Printer 1 Nov 82 TBDDesk Top Pentium III Computer 1 Nov 82 TBDInstructor Lesson Guide 3 Nov 82 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Nov 82 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Nov 82 TBDProjector (Part # MT830PLUS) 1 Nov 82 TBDProjector Screen (Part # SB-QRT-670S) 1 Nov 82 TBDStudent Guide 10 Nov 82 OnboardStudent Worksheets 10 Nov 82 Onboard

CIN, COURSE TITLE: C-701-0010, Oxyfuel/Shielded Metal Arc Welder Recertification (Track N-701-0010)TRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC: Norfolk Naval Shipyard, 49163

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Apr 96 TBDCarbon Dioxide Fire Extinguisher 1 Apr 96 TBDColor Printer 1 Apr 96 TBDDesk Top Pentium III Computer 1 Apr 96 TBDInstructor Lesson Guide 3 Apr 96 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Apr 96 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Apr 96 TBDProjector (Part # MT830PLUS) 1 Apr 96 TBDProjector Screen (Part # SB-QRT-670S) 1 Apr 96 TBDStudent Guide 10 Apr 96 OnboardStudent Worksheets 10 Apr 96 Onboard

IV - 30



QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Jan 84 TBDCarbon Dioxide Fire Extinguisher 1 Jan 84 TBDDesk Top Pentium III Computer 1 Jan 84 TBDInstructor Lesson Guide 3 Jan 84 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Jan 84 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jan 84 TBDProjector (Part # MT830PLUS) 1 Jan 84 TBDProjector Screen (Part # SB-QRT-670S) 1 Jan 84 TBDStudent Guide 12 Jan 84 OnboardStudent Worksheets 12 Jan 84 Onboard

CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion ControlTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Nov 77 TBDCarbon Dioxide Fire Extinguisher 1 Nov 77 TBDDesk Top Pentium III Computer 1 Nov 77 TBDInstructor Lesson Guide 3 Nov 77 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Nov 77 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Nov 77 TBDProjector (Part # MT830PLUS) 1 Nov 77 TBDProjector Screen (Part # SB-QRT-670S) 1 Nov 77 TBDStudent Guide 12 Nov 77 OnboardStudent Worksheets 12 Nov 77 Onboard

CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion ControlTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Jan 92 TBDCarbon Dioxide Fire Extinguisher 1 Jan 92 TBDDesk Top Pentium III Computer 1 Jan 92 TBDInstructor Lesson Guide 3 Jan 92 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Jan 92 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jan 92 TBDProjector (Part # MT830PLUS) 1 Jan 92 TBDProjector Screen (Part # SB-QRT-670S) 1 Jan 92 TBDStudent Guide 12 Jan 92 OnboardStudent Worksheets 12 Jan 92 Onboard

IV - 31



QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUSColor Printer 1 Oct 83 TBDDrafting Table (Part # VLT32T) 10 Oct 83 TBDInstructor Lesson Guide 3 Oct 83 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Oct 83 TBDOverhead Projector (Part # 1BC7) 1 Oct 83 TBDStudent Guide 12 Oct 83 OnboardStudent Worksheets 12 Oct 83 Onboard

CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and MarkingsTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS Jacksonville, 39829

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUSColor Printer 1 Jan 73 TBDDrafting Table (Part # VLT32T) 10 Jan 73 TBDInstructor Lesson Guide 3 Jan 73 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Jan 73 TBDOverhead Projector (Part # 1BC7) 1 Jan 73 TBDStudent Guide 12 Jan 73 OnboardStudent Worksheets 12 Jan 73 Onboard

CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and MarkingsTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUSColor Printer 1 Jan 92 TBDDrafting Table (Part # VLT32T) 10 Jan 92 TBDInstructor Lesson Guide 3 Jan 92 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Jan 92 TBDOverhead Projector (Part # 1BC7) 1 Jan 92 TBDStudent Guide 12 Jan 92 OnboardStudent Worksheets 12 Jan 92 Onboard


QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Apr 94 TBDCarbon Dioxide Fire Extinguisher 1 Apr 94 TBDColor Printer 1 Apr 94 TBDDesk Top Pentium III Computer 1 Apr 94 TBDInstructor Lesson Guide 3 Apr 94 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Apr 94 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Apr 94 TBDProjector (Part # MT830PLUS) 1 Apr 94 TBD

IV - 32


Projector Screen (Part # SB-QRT-670S) 1 Apr 94 TBDStudent Guide 5 Apr 94 OnboardStudent Worksheets 5 Apr 94 Onboard

CIN, COURSE TITLE: N-701-0025, Gas Metal Arc Welding CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC: NAS North Island, 39503

QTY DATETYPES OF MATERIAL OR AID REQD REQD STATUS4' X 8" Whiteboard 1 Mar 96 TBDCarbon Dioxide Fire Extinguisher 1 Mar 96 TBDColor Printer 1 Mar 96 TBDDesk Top Pentium III Computer 1 Mar 96 TBDInstructor Lesson Guide 3 Mar 96 OnboardIntegrated VHS Play/Record (Part # AG-520A) 1 Mar 96 TBDProjection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Mar 96 TBDProjector (Part # MT830PLUS) 1 Mar 96 TBDProjector Screen (Part # SB-QRT-670S) 1 Mar 96 TBDStudent Guide 5 Mar 96 OnboardStudent Worksheets 5 Mar 96 Onboard

IV - 33

IV.B.3. TECHNICAL MANUALS

CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : MCAS Cherry Point, 45008

QTY DATETECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS

NA 01-1A-16 Hard copy 10 Oct 83 OnboardNondestructive Inspection Methods

CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS Jacksonville, 39829



CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician RecertificationTRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC : Norfolk Naval Shipyard, 49163


NA 01-1A-16 Hard copy 10 Sep 96 OnboardNondestructive Inspection Methods

CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS North Island, 39503


NA 01-1A-16 Hard copy 10 Jan 83 OnboardNondestructive Inspection Methods

CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific TaskTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : MCAS Cherry Point, 45008



IV - 34


CIN, COURSE TITLE: C-701-0006, Non-Destructive Inspection Technician Specific Task (Track N-701-0006)TRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS Jacksonville, 39829



CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific TaskTRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC : Norfolk Naval Shipyard, 49163


NA 01-1A-16 Hard copy 5 Sep 96 OnboardNondestructive Inspection Methods

CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific TaskTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS North Island, 39503


NA 01-1A-16 Hard copy 5 Jan 82 OnboardNondestructive Inspection Methods

CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : MCAS Cherry Point, 45008


NA 01-1A-34 Hard copy 14 Jul 86 OnboardAeronautical Equipment Welding

CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS Jacksonville, 39829


NA 01-1A-34 Hard copy 14 Oct 87 OnboardAeronautical Equipment Welding

IV - 35


CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding CertificationTRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC : Norfolk Naval Shipyard, 49163


NA 01-1A-34 Hard copy 14 Apr 96 OnboardAeronautical Equipment Welding

CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS North Island, 39503



CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : MCAS Cherry Point, 45008



CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS Jacksonville, 39829



CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding RecertificationTRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC : Norfolk Naval Shipyard, 49163



IV - 36


CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS North Island, 39503



CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : MCAS Cherry Point, 45008



CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS Jacksonville, 39829


NA 01-1A-34 Hard copy 10 May 92 OnboardAeronautical Equipment Welding

CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder CertificationTRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC : Norfolk Naval Shipyard, 49163



CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS North Island, 39503


NA 01-1A-34 Hard copy 10 Nov 82 OnboardAeronautical Equipment Welding

CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : MCAS Cherry Point, 45008


NA 01-1A-34 Hard copy 10 Jul 86 Onboard

IV - 37

Aeronautical Equipment Welding

IV - 38


CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS Jacksonville, 39829



CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder RecertificationTRAINING ACTIVITY: Naval Aviation Depot NorfolkLOCATION, UIC : Norfolk Naval Shipyard, 49163



CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder RecertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS North Island, 39503


NA 01-1A-34 Hard copy 10 Nov 82 OnboardAeronautical Equipment Welding

CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion ControlTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : MCAS Cherry Point, 45008


NA 01-1A-509 Hard copy 12 Jan 84 OnboardAircraft Weapons Systems Cleaning And Corrosion Control

CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion ControlTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS Jacksonville, 39829


NA 01-1A-509 Hard copy 12 Nov 77 OnboardAircraft Weapons Systems Cleaning And Corrosion Control

CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion ControlTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS North Island, 39503


NA 01-1A-509 Hard copy 12 Jan 92 Onboard

IV - 39

Aircraft Weapons Systems Cleaning And Corrosion Control

IV - 40


CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and MarkingsTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : MCAS Cherry Point, 45008


FED-STD-595B Hard copy 12 Oct 83 OnboardColor Used In Government Procurement

MIL-F-18264D Hard copy 12 Oct 83 OnboardFinishes: Organic, Weapons Systems, Application And Control Of

MIL-STD-2161A Hard copy 12 Oct 83 OnboardPaint Schemes And Exterior Markings For U.S. Navy And MarineCorps Aircraft

NA 01-1A-509 Hard copy 12 Oct 83 OnboardAircraft Weapons Systems Cleaning And Corrosion Control

CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and MarkingsTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS Jacksonville, 39829


FED-STD-595B Hard copy 12 Jan 73 OnboardColor Used In Government Procurement

MIL-F-18264D Hard copy 12 Jan 73 OnboardFinishes: Organic, Weapons Systems, Application And Control Of

MIL-STD-2161A Hard copy 12 Jan 73 OnboardPaint Schemes And Exterior Markings For U.S. Navy And MarineCorps Aircraft


CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and MarkingsTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS North Island, 39503


FED-STD-595B Hard copy 12 Jan 92 OnboardColor Used In Government Procurement

MIL-F-18264D Hard copy 12 Jan 92 OnboardFinishes: Organic, Weapons Systems, Application And Control Of

IV - 41


MIL-STD-2161A Hard copy 12 Jan 92 OnboardPaint Schemes And Exterior Markings For U.S. Navy And MarineCorps Aircraft


CIN, COURSE TITLE: N-701-0025, Gas Metal Arc Welding CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : MCAS Cherry Point, 45008



CIN, COURSE TITLE: N-701-0025, Gas Metal Arc Welding CertificationTRAINING ACTIVITY: Naval Aviation DepotLOCATION, UIC : NAS North Island, 39503


NA 01-1A-34 Hard copy 5 Mar 96 OnboardAeronautical Equipment Welding

V-1

PART V - MPT MILESTONES

COG CODE MPT MILESTONES DATE STATUS

TSA Began Training at Jacksonville Jan 73 Complete

TSA Began Training at North Island Oct 80 Complete

TSA Began Training at Cherry Point Oct 83 Complete

TSA Began Training at Norfolk Apr 96 Complete

PDA Distribute Draft NTSP Jun 01 Complete

OPO Approve NTSP Feb 02 Complete

TSA Deliver Training Aids FY02 Pending

TSA Deliver Technical Training Equipment FY02 Pending

PART VI - ACTION ITEMS/ACTION REQUIRED

VI-1

DECISION ITEM OR ACTION REQUIRED COMMAND ACTION DUE DATE STATUS

Most of the equipment listed in Part IV as “Required” lists the status as“TBD.” A more definitive status of required items should be provided.

AIR 3.4.6 Open Pending

Note: Due to the sheer volume of information contained in the following ActionItems, the Action Required is not included. For information on each MTRR ActionRequired, refer to the OPNAV N789H Home Page, (http://www.avtechtra.navy.mil)or contact a NAVAIRSYSCOM, AIR 3.4.6 point of contact listed in Part VII of thisNTSP.

ACTION ITEM NUMBER CIN COMMAND ACTION STATUS

NADEP.00MTRR.0005.1 N-701-0005 AIR 3.4.6 Pending



NADEP.00MTRR.0005.4 N-701-0005 OPNAV 789 Pending










NADEP.00MTRR.0007.6A N-701-0007 AIR 3.4.6 Pending

NADEP.99PMTRR.0007.1 N-701-0007 AIR 3.4.6 Pending


NADEP.00MTRR.0007.5 N-701-0007 AIR 3.2 Pending





NADEP.00MTRR.0007.6 N-701-0007 COMNAVRES Pending



PART VI - ACTION ITEMS/ACTION REQUIRED

VI-2

ACTION ITEM NUMBER CIN COMMAND ACTION STATUS





900.00MTRR.7040.02 N-701-0009 COMNAVRES Pending








PART VII - POINTS OF CONTACT

NAME / FUNCTION / ACTIVITY, CODE / INTERNET EMAIL TELEPHONE NUMBERS

VII-1

CAPT Owen Fletcher COMM: (703) 604-7747Deputy for Aviation Maintenance Programs DSN: 664-7747CNO, N781B FAX: (703) [email protected]

CAPT Terry Merritt COMM: (703) 604-7730Head, Aviation Technical Training Branch DSN: 664-7730CNO, N789H FAX: (703) [email protected]

AZCS Gary Greenlee COMM: (703) 604-7743NTSP Manager DSN: 664-7743CNO, N789H1A FAX: (703) [email protected]

Mr. Robert Zweibel COMM: (703) 602-5151Training Technology Policy DSN: 332-5151CNO, N795K FAX: (703) [email protected]

AMHC David Edinger COMM: (301) 757-8141Assistant Program Manager, Training Systems DSN: 757-8141NAVAIRSYSCOM, PMA205-3E1 FAX: (301) [email protected]

Ms. Nancy Heisley COMM: (301) 757-3084Competency Manager DSN: 757-3084NAVAIRSYSCOM, AIR 3.4.6 FAX: (301) [email protected]

AEC Larry Morales COMM: (301) 757-3097NADEP Training Manager DSN: 757-3097NAVAIRSYSCOM, AIR 3.4.6 FAX: (301) [email protected]

Mrs. Pollyanna Randol COMM: (757) 836-0103Aviation NTSP Point of Contact DSN: 863-0103CINCLANTFLT, N-721 FAX: (757) [email protected]

Mr. Bob Long COMM: (808) 471-8513Deputy Director for Training DSN: 471-8513CINCPACFLT, N70 FAX: (808) [email protected]

Mr. Steve Berk COMM: (850) 452-8919CNET NTSP Distribution DSN: 922-8919CNET, ETS-23 FAX: (850) [email protected]



VII-2

CDR Erich Blunt COMM: (850) 452-4915Aviation Technical Training DSN: 922-4915CNET, ETE-32 FAX: (850) [email protected]

MAJ Jon Doering COMM: (703) 784-6241Head, ACE Branch, TFS Division DSN: 278-6241MCCDC, C5325A FAX: (703) [email protected]

Mr. Anthony Caruso COMM: (407) 380-4807NTSP POC, NAWC, Training Systems DSN: 960-4807Division, 4971 FAX: (407) [email protected]

Mr. Fernando Del Valle COMM: (619) 545-4406Fleet Training Coordinator DSN: 735-4406NADEP North Island, 90021 FAX: (619) [email protected]

Ms. Valerie Knapp COMM: (252) 464-7560Fleet Training Coordinator DSN: 451-7560NADEP Cherry Point, 7.2.232 FAX: (252) [email protected]

Mr. Mike Waldroup COMM: (757) 396-4883Fleet Training Coordinator DSN: 961-4883Norfolk Naval Shipyard, 900T.1 FAX: (757) [email protected]

Mr. Larry Brown COMM: (904) 542-5151Fleet Training Coordinator DSN: 942-5151NADEP Jacksonville, 6.0CMC FAX: (904) [email protected]

Mr. Bob Hayes COMM: (301) 737-3500NTSP Author DSN: NoneManagement Analysis Group Associates FAX: (301) [email protected]

Mr. Phil Szczyglowski COMM: (301) 757-8280Competency Manager DSN: 757-8280NAVAIRSYSCOM, AIR 3.4.1 FAX: (301) [email protected]

Mr. Bob Kresge COMM: (301) 757-1844NTSP Manager DSN: 757-1844NAVAIRSYSCOM, AIR 3.4.1 FAX: (301) [email protected]



VII-3

ADCS Patrick Reed COMM: (301) 757-3107NTSP Coordinator DSN: 757-3107NAVAIRSYSCOM, AIR 3.4.1 FAX: (301) [email protected]