navair mobile facilities
TRANSCRIPT
A T r A d i T i o n o f Q u A l i T y
nAVAir Mobile fAciliTies
NAVAIR MOBILE FACILITIESFAMILY OF 20’ ISO SHELTERS
Gichner Systems Group’s rapidly deployable 20’ ISO Mobile Facilities
are specifically designed to be joined together to form a connected,
environmentally controlled space. These lightweight, aluminum composite
shelters are certified to be transported by air, land, or sea. Gichner is the
largest producer of Mobile Facilities, delivering over 7,000 units to the U.S.
Navy, and is the only manufacturer to have successfully qualified all seven
standard configurations. Beyond the standard offerings, Gichner engineers,
manufactures, and integrates custom Mobile Facilities to meet specific
mission requirements.
• Joined together using end doors and removable side panels to
form a connected, environmentally controlled space
• Rapidly transported & deployed to the field by air, land, or sea
• Standard 8’ x 8’ x 20’ container dimensions and corner castings
tested for military or commercial freight transportation and
handling (ISO 668, ISO 1496/1, ISO 1161, ISO 3874)
• Constructed with aluminum skins and a rigid, closed-cell foam core
• Insulated and integrated with Environmental Control Units
(ECUs), electrical provisions, and other support equipment
• Designed for a 20-year service life
• Available life cycle support including refurbishment, reset, &
repair of damaged Mobile Facilities
• CSC certified, authorized by DoD Instruction 4500.37, and registered
with the Joint Committee On Tactical Shelters (JOCOTAS)
• Available custom configuration and integration
NAVAIR Mobile Facilities are designed from Gichner’s basic GMS-459 20’ ISO Shelter.
Mobile Facility Type A (MFA) • Complexed with other MFs using 48” x 76” personnel doors on both ends
• Wired for 100Amp, 60 Hz power and is capable of transferring 60Hz
or 400Hz power to another shelter
• Includes a power distribution panel, a power monitor panel,
and ceiling mounted lighting
• Contains provisions for the installation of a side-mounted
Environmental Control Unit (ECU)
nAVAir Mobile fAciliTies
Mobile Facility Type B (MFB) Similar to MFA with the following exceptions:
• Includes alternate lighting and ceiling mounted air duct
Side Opening Mobile Facility Type B (SOMFB) Similar to SOMFA with the following exceptions:
• Features a non-standard 30” x 65” personnel door
on the ECU side and no end doors
Side Opening Mobile Facility Type B Modified (SOMFB Modified) Similar to SOMFB with the following exceptions:
• Features 80” wide double doors on one end to allow for the loading
and unloading of large equipmentIntegration Unit Mobile Facility (INU) • Complexed with other MFs using standard personnel doors on both
ends and three removable side panels
• Contains power distribution capabilities that allow the transfer of
200 Amp, 60 Hz and 100 Amp, 400 Hz power to up to 6 MFs Side Opening Mobile Facility Type C (SOMFC) • Features two removable sides and a standard personnel door on one end
• Basic unit contains no power distribution, lighting, or ECU provisions
Side Opening Mobile Facility Type A (SOMFA)Similar to MFA with the following exceptions:
• Contains provisions for the installation of two ECUs on one side
• Features a removable side wall to allow complexing with other SOMFs
• Basic unit contains no power distribution or lighting
490 East Locust Street
Dallastown, Pennsylvania USA
www.gichnersystemsgroup.com
Revision 7/2013
PH: 877 520 1773
FX: 717 246 5496