nature-sdi plus training framework training to support inspire implementation
DESCRIPTION
Co-funded by the Community Programme e Content plus ECP-2007-GEO-317007. NATURE-SDI plus Training Framework Training to Support INSPIRE Implementation. Training for who?. - PowerPoint PPT PresentationTRANSCRIPT
NATURE-SDIplus Training Framework
Training to Support INSPIRE Implementation
Co-funded by the Community Programme eContentplus
ECP-2007-GEO-317007
Training
Training for who?
2
NATURE-SDIplus Training is generally addressed to the operators in Geographical Information and Nature Conservation Data Management, dealing with INSPIRE and its implementation.
In addition, the NATURE-SDIplus training is addressed to the project Partners, in order to acquire a common knowledge on the different topics addressed by the project (both on the technical aspects and in the nature conservation topics), also in view to make easier their participation in the project activities.
Background Knowledge on Nature Conservation MODULE 1 - NATURE CONSERVATION
GI Data Modelling and Standards MODULE 2 - METADATA MODULE 3 - DATA HARMONIZATION MODULE 4 - STANDARDS
Basic IT Standards MODULE 5 - BASICS OF WEB SERVICES
INSPIRE MODULE 6 - THE INSPIRE DIRECTIVE
Training Package
Level 1
Background Knowledge
Level 2
SDI and Nature
conservation
Level 3 Applications
Level 1 - Background Knowledge
MODULE 7 - NATURE CONSERVATION IN INSPIRE
MODULE 8 – DATASETS ANALYSIS AND DATA POLICIES
MODULE 9 – PROCEDURES AND TOOLS FOR DATA HARMONISATION
MODULE 10 – DATA REMODELLING – PRACTICAL EXPERIENCE
MODULE 11 – NATURE-SDIplus INFRASTRUCTURE
MODULE 12 – TESTING THE COMPLIANCE OF OUTCOMES WITH INSPIRE AND INTERNATIONAL STANDARDS
Training Package
Level 2
SDI and Nature
conservation
Level 1
Background Knowledge
Level 3 Applications
Level 2 - SDI and Nature conservation
MODULE 13 - GOOD PRACTICES Interreg III A Alcotra Italy-France - Flora and habitat
conservation and management in the south-western Alps
Dutch Provinces – datasets INSPIRE compliant SAGIS - WebGIS of the Federal State of Salzburg FFH basic data collection GIS data base Of Osogovo Mountains in Bulgaria and
Macedonia Problems of Strandja Nature Park Territory Borders BDN (Banche Dati Naturalistiche) State Cadastre of Protected areas Information system of Protected species ISTB Information system for taxons and habitats EnviroGeoPortal – Geoportal of Environmental
infrastructure for Geographic information in Slovakia VIC Nature MESH (Mapping European Seabed Habitats) NBN Gateway (National Biodiversity Network's
Gateway)
Training Package
Level 3
Applications
Level 1
Background Knowledge
Level 2
SDI and Nature
conservation
Level 3 - Applications
Training
Organisation of the Training Action
• Learning Path
• Time Schedule
• Organizational Aspects
Training
1. Nature Conservation and Natura 2000 Network
2. The INSPIRE Directive (INSPIRE Seminar)
3. Metadata, Concepts and Standards
4. Web Services
5. Nature Conservation and INSPIRE
6. Data Harmonisation
7. Procedures and tools for data and metadata harmonisation
8. Data remodelling: practical experience
Learning path – list of modules
Training
NATURE-SDIplus Training Action Nature Conservation in INSPIRE
The learning path includes 8 training modules for a total of about 30 hours of self learning
The initiative starts with an introductory workshop where the e-learning platform and the training modules are presented and discussed
The workshop is followed by distance learning actions with material in English
At the end, the participants are asked to fill in an evaluation form
Training
Proposed Learning Path 1/4
Nature Conservation and Natura 2000 Network The objective of the module is, at first, to give an overview of the most significant
policies relevant to protected sites management and biodiversity conservation at the International and European level. Particular attention is committed to the EU most significant nature conservation policy: the NATURA 2000 Network. Additional lectures are related to other EU and International Policies on Nature Conservation (RAMSAR, IUCN, OSPAR…..)
Course length is around 3 hours
The INSPIRE Directive (INSPIRE Seminar)
The module deals with the following issues: INSPIRE: background, objectives, scope and content of the Directive INSPIRE: the implementation process and the implementing rules INSPIRE: expected impactsCourse length is around 3 hours
Training
Proposed Learning Path 2/4
Metadata, Concepts and Standards The learning objective of this module is to explain the basic
concepts about metadata and how they apply to GI. Special attention is given to metadata standards and to the INSPIRE Metadata Implementing Rules. The module consists of three components, each organized in one or more short lectures.
Course length is around 4 hours
Web ServicesThe learning objective of this module is to explain the basic
concepts of web service technology and how it is applied in the OGC specifications. Special attention is given to the WMS, WFS and WPS services. The module consists of five shorter lectures, reading instructions and a self test.
Course length is around 7 hours
Training
Proposed Learning Path 3/4 Nature Conservation and INSPIREThe module focuses on the role of the INSPIRE Directive in the field of
nature conservation, providing a brief introduction to the four INSPIRE themes related to nature conservation and considered by the NATURE-SDIplus Project.
Therefore, the module gives an overview on the main provisions coming from the Protected Sites data specification guidelines (INSPIRE, 2009 - D2.8.1.9).
Additional lectures are the definitions given by INSPIRE for the four data themes on nature conservation (Protected Sites, Bio-geographical Regions, Habitat and Biotopes, Species Distribution).
Course length is around 4 hours Data Harmonisation The objective of this training module is that the trainee, at the end of the
course, knows the basic concepts of data harmonisation and how they are related to each other. The objective is also that you can apply the concepts to simple but common problems.
Course length is around 4 hours
Training
Proposed Learning Path 4/4
Procedures and Tools for Data and Metadata Harmonisation
This Module describes procedures and tools to migrate the existing Metadata profiles and Data models to the data model for the INSPIRE themes Protected Sites, Habitats and Biotopes and Species Distribution.
The objective of this module is to facilitate the choice of the tool for the different situations and to indicate how to do it enumerating the steps from the existing data up to the preparation for its publication.
Course length is around 4 hours
Data Remodelling: Practical Experience The module offers an example of data transformation within
INSPIRE, according to the guidelines of the Deliverable 3.5 of NATURE-SDIplus “specification for data model implementation (procedures for metadata profile and data model implementation)”.
Course length is around 1 hours
Training
Time Schedule of the Training Action
Introductory Workshop - Remote Workshop 27th April 2011
Registration – Creation of an account to access the courses (Within May 10th 2011)
Distance Learning (self – learning) of the proposed Curriculum (May 15th – July 15th 2011)
Evaluation within July 31st 2011 (evaluation form)
Certificate of attendance after the submission of the evaluation form
Training
Certification of Attendance
Flexible, as for national needs/form It consists of a Certification of attendance, not
needed any examination
Issued after the submission of the Evaluation Form Certification will be issued only for modules
attended by the trainees Progress >80%, reasonable registered time
Issuing body is the tutor of the action (GEO) or GISIG?
Fac Simile of certification (click here)
Training
Resources 1/3
Reference Web Site for the Training Action
http://www.nature-sdi.eu/training_action/hu
It informs about the training action
It includes links to the reference files
It provides direct access to the Training Modules
Training
Resources 2/3
E-learning platform
www.gisig.it/platform
It hosts the training modules (in English) Personal loginProgress monitoring
Formats of training material: texts, video (with voice), tests
Training approach: self-learning
Training
Resources 3/3
Forum
www.gisig.it/forum
It allows interaction among the members of the classroom and exchange of experiences
Personal login
Practical demonstration of the access to the training
Thank you, in advance for your active contribution to the training action