IDEAL FOR CEMENT GROUT LINES.

INTERNAL AND EXTERNAL APPLICATION.

NAN

OTE

CH

NO

LOG

Y PR

OTE

CTI

VE T

REAT

MEN

T - G

ROU

T LI

NES

P R OT E TT I V O V E T R I E C R I S TA L L IPF-10grout lines protection

features

advantages

ECTOR® PF10 is a nanotechnology treatment of last generation desi-gned to properly protect all cement grout lines. ECTOR® PF10 provides an excellent protection against dirt, oily sub-stances and water infiltration, assuring an extreme ease of cleaning. Unlike protective silicones on the market which turn yellow and “peel off” over time, ECTOR® PF10 aggregates to the substrate of the grout lines at the molecular level, providing an invisible, total and long la-sting protection.

PULITORE FUGHE is a strong and penetrating cleaner designed for ceramic and porcelain floor. No matter how dirt the grout lines are, this cleaner will be up to the task. ATTENTION: DO NOT USE on marble and natural limestone floors.

• ECTOR® PF-10 dries quickly at room temperature• It is frost resistant• It is solvent and silicones free• Water based

PF-10

• The treated surfaces get excellent hydrophobic and oleophobic properties which literally reject dirt and contaminats

• Dirt cannot penetrate into the substrate so the surface becomes easy to clean.

• It creates an excellent antifouling protection (against moss and fungi).

• It does not create a film which becomes yellow or “peel off” over time, but provides an invisible protection.

• It does not alter the breathability of the grout lines.• It provides a long lasting protection.• Very easy application.

The best eco-friendly protection

PF-10

1. Clean carefully the grout lines by using “Pulitore Fughe” (undi-luted) and an appropriate brush (if not available, a nail brush may be useful at this purpose). If necessary, repeat the proce-dure to assure a perfect cleaning.

2. Rinse to remove any residue and let the surface dry thorou-ghly.

3. Now the grout lines are clean and ready to be protected. 4. Ector® PF-10 is ready to use. Apply it directly on the grout lines

without overusing. During the application, we recommend to immediately wipe off (with a paper towel) any excess of product that may have rea-ched the tiles. Once dry the grout lines are already protected, but the optimal and complete protective effect is achieved 24 hours after the tre-atment.

CONSUMPTIONThe consumption depends on the width of the grout lines.Usually the kit (100 ml) is enough to treat grout lines for 200 linear meters.

Packaging: kit composed by:• 100 ml/1000 ml bottle of PULITORE FUGHE (cleaner) • 100 ml/1000 ml bottle of PF-10 PROTETTIVO FUGHE (protecti-

ve treatment).

method ofapplication

NAN

OTE

CH

NO

LOG

Y PR

OTE

CTI

VE T

REAT

MEN

T - G

ROU

T LI

NES

Data Sheet PF-10 - v.07/2015

The information contained in this data sheet is based on the best practical and laboratory. It cannot in any way imply a or liability regarding the use of our products, since the conditions of use are beyond our control. It is recommended , before using the product , to carry out practical tests that confirm its suitability for the intended use. The data can be changed at any time without prior notice.

produced by R. & R. GROUP

www.renodry.com

delivered by RENODRY

Christian Zido Hauptstrasse 552276 Katzelsdorf