name of teaching staff : dr. k.n. vijaya kumar

Name of Teaching Staff : Dr. K.N. Vijaya Kumar

Designation : Professor & Head,

Department : Mechanical Engineering Date of Joining the Institution : 18.9.2012

Qualifications with Class/Grade : 1. Ph.D (Tech.) Mechanical Engg. University of Mumbai, 2008

2. M.E. (Mech.) Machine Design, SPCE with Ist Class (69.00%), 2001.

3. M.E. (Mgmt.) SJCE with Ist Class (61.00%), 1990. 4. B.E. (Mech.) P.D.A.LOE with Ist Class (71.81%), 1987.

5. D.M.E. Govt. Polytechnic, Bellary.

Total Experience in Years : Teaching: 25 Years

1. Professor, D.J.Sanghvi College of Engineering from 18-9-2012 till date. 2. Professor & Vice Principal – SIT Lonavala from Jul’2011 to 17-9-2012. 3. Professor & Head SIT Lonavala from Jan’10 to Jul’11. 4. Assistant Professor, Fr. CRCE from May’09 to Dec’09

5. Lecturer (Sl. Grade) Fr.CRCE Jan’98 to Apr’09 6. Lecturer VESIT from Jun’93 to Dec’97.

7. Lecturer Fr. CRCE Jan’93 to Jun’93. 8. Lecture SESCOE Jan’90 to Sep’92.

Industry: ----

Research: ---

Papers Published:

National: 9 1. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, “Quality improvement in Manufacturing – A Data mining approach” Proceedings of National Conference on Management Science and Practice, IIT Chennai 9-11, March 2007. 2. Dr. K.N. Vijay Kumar, Mr. M. Ravindran, Mr.Rajit R. Nair, “Quality Aspects in Manufacturing a Deodorizer – A Case Study”, Journal of Indian Institute of Industrial Engineering, XXVI No. 9, September 2007, Pg 35-38.

3. Dr. Arun Kumar, Dr. S.S. Mantha, Dr. K.N. Vijay Kumar, Sahij Singh Gadu, “Quality Improvement using Statistical Process Control – A Case Study”, Journal of Indian Institute of Industrial Engineering, XXXVI No. 10, October 2007, Pg 27-31.

4. Gautam V. Divekar, Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, “Rejection Analysis Based on First Pass Yield – A Case Study”, Journal of Indian Institute of Industrial Engineering, XXXVI November 2007, Pg 31-36.

5. Dr. K.N. Vijay Kumar, A D Lonkhande Investigation into feasibility of establishing Remanufacturing Industry, Proceedings of NCTIME 2010, K.K. Wagh college of Engg. 5-6 Oct 2010. 6. KavitaDhanawade, V.K. Sunnapwar, HanamantDhanawade, B.A. Mujawar, Dr. K.N. Vijay Kumar, Thermal analysis of solid and perforated extended surface by forced convection – an overview, JP Journal of heat and mass transfer Vol. 5 No. 2, 2011, pp, 133-147.

7. T.C. Manjunath, Dr. K.N. Vijay Kumar, Suhasini V.K., “Lossless compression in artificial images” Proceedings of VIT National Conference 2012 Recent Advances and Challenges in Engineering and Management” Mumbai, March 2-3 2012.

8. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Dr. Arun Kumar, “Measurement System Analysis for Improving Quality – A Case Study”, Journal of Indian Institute of Industrial Engineering, Accepted for publication.

9. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Dr. Arun Kumar, “uncertainty in Measurement – A Review”, Journal of Indian Institute of Industrial Engineering, Accepted for publication.

International: 5 1. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Dr. Arun Kumar, “MCUSUM Control Charts for improving Quality”, Proceedings of International Conference on Advanced Manufacturing Technologies, CMERI Durgapur, 29-30, November 2007.

2. Dr. K.N. Vijay Kumar, Suhasini K.V. Spatial, “Data mining application to traffic analysis” Proceedings of International Conference Applications – 2010. Pondicherry, 24-27 Dec, 2010.

3. T.C. Manjunath, Dr. K.N. Vijay Kumar, Suhasini V.K. “Simulation of a Shortest Path using Pixel Method in Robotics Path Planning” International Conference and workshop on Emerging Trends in Technology is published in ICWET2 proceedings with IJCA on March 09, 2012.

4. Dr. K.N. Vijay Kumar, Dhanawade H.S. Thermal Analysis of perforated fin arrays and arrays with cross fin at centre an Overview International Journal of Emerging Technologies and application in Engg., Technology and sciences, ISSN No. 0974-3588, Vol. 4 Issue 2 Page 182-187.

5. T.C. Manjunath, Dr. K.N. Vijay Kumar, Suhasini V.K. “Control of Stationary Robots using Visual Basic Software” International Conference and workshop on Emerging Trends in Technology is published in ICWET2 proceedings with IJCA on March 09, 2012.

Papers Presented in Conferences:

National: 5 1. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Dr. Arun Kumar, “Six Sigma and Statistical Methods in R & D and Manufacturing”, 48th National Convention of Multidimensional Concepts and Approaches for Continual Improvement in the E-Millennium, Indian Institute of Industrial Engineering Bangalore, September 29-30 2006

2. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Lalit Prasad, “Multivariate capability indices for Quality improvement – A review”, National Conference on Trends in Advance Manufacturing NCAM (2007) at Fr. CRCE Bandra, Mumbai, 19th – 20th October 2007.

3. T.C. Manjunath, Dr. K.N. Vijay Kumar, Suhasini V.K. “Template matching techniques using pattern recognition concepts” National Conference on Computer, Communication and Information Technology (NC3IT 2012) Pandharpur, on 18-19 Feb, 2012.

4. T.C. Manjunath, Dr. K.N. Vijay Kumar, Suhasini V.K. “Development of a jacobian matrix for vertical axes robots” National Conference on Computer, Communication and Information Technology (NC3IT 2012), Pandharpur on 18-19 February 2012.

5. T.C. Manjunath, Dr. K.N. Vijay Kumar, Suhasini V.K. “Separation of foreground & Background objects in image proceedings” VIT National Conference 2012 Recent Advances and Challenges in Engineering and Management, Mumbai, March 2-3, 2012.

International: 3 1. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Dr. Arun Kumar, “Quality Improvement Using Multivariate Statistical Process Control”, International Conference on Quality Management Practices for Organizational Excellence, by ITM and NCQM at ITC Grand Central Parel, Mumbai, 16th & 17th August, 2007.

2. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Dr. Arun Kumar, “MEWMA Control Charts for Complex Processes”, International Conference on Advances in Manufacturing Engineering at Manipal Institute of Technology, Manipal, Karnataka 24-26 October 2007.

3. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Dr. Arun Kumar, “Measurement system analysis with attribute data – A case study” 9th International Symposium on Management and Quality Control, Indian Institute of Technology, Chennai, November21-24 2007.

PhD Guide? Give field & : Field: TQM.WCM,----

University University: ---Pune,

Mumbai,JJTU,Pecific- PhDs / Projects Guided : PhDs : 1

Projects at Masters level: 4

Books Published / IPRs / Patents

Professional Memberships : ISNDT

Indian Institution of Industrial Engineering

ISTE,ISME

Consultancy Activities : --

Awards : --

Grants fetched : --

Interaction with : --

Professional Institutions

Name of Teaching Staff : Dr. C. M. Choudhari

Designation : Professor

Department : Mechanical Engineering

Date of Joining the Institution : 24.03.2017

Qualifications with Class / Grade : Ph. D.(Metal Casting) (2015) V.J.T.I, Mumbai, Mumbai

University.

M.E. (Machine Design), V.J.T.I, Mumbai, Mumbai

University, Distinction, 2003.

B.E. (Mechanical Engg), Prof. Ram Meghe College

of Engineering Badnera, Amaravati University, 1997.

Total Experience in Years : Teaching:

Professor in Mechanical Engineering Department, D. J. Sanghvi College of Engineering from 24.03.2017 to till date. Worked as Associate Professor in Mechanical Engineering Department, Fr. Conceicao Rodrigues Institute of Technology, Vashi, Navi Mumbai from July 2016 to March 2017.

Worked as Assistant Professor in Mechanical Engineering Department, Fr. Conceicao Rodrigues Institute of Technology, Vashi, Navi Mumbai from January 2004 to July 2016.

Worked as Lecturer in Mechanical Engineering Department, Fr. Conceicao Rodrigues Institute of Technology, Vashi, Navi Mumbai, from February 1998 to December 2003.

Industry:

Worked as Vendor Development Engineer, in Motilal

Omprakash Works, Pune, from June 1997 to December

1997.

Research

Papers Published: A. International Journals(Total Citations Received: 52) 1. Choudhari C. M., Patil V. D., “Product

Development and its Comparative Analysis by SLA,

SLS and FDM Rapid Prototyping Processes”,

International Journal of Physics: Materials

Science and Engineering (MSE), doi:10.1088/1757-

899X/149/1/012009).

2. Choudhari C M, B E Narkhede, “Improvement of

Mould Yield in Sand Castings Process using Multi

Cavity Approach” submitted paper to International

Journal of Manufacturing Technology and

Management, from Inderscience Publishers (Paper

ID-IJMTM-147756). 3. Choudhari C. M., B. E. Narkhede, and S. K.

Mahajan, “Methoding and Simulation of LM 6 Sand Casting for Defect Minimization with its

Experimental Validation”, Elsevier Procedia Engineering, Vol. 97, pp 1145-1154, 2014.

4. C M Choudhari, B E Narkhede and S K Mahajan,

“Numerical Simulation of Long Cylindrical Shape Sand Casting with its Experimental Validation”, Elsevier Proceedings, Vol. 1, pp 243-248, 2014.

5. Choudhari C. M., B. E. Narkhede, and S. K.

Mahajan, “Casting Design and Simulation of Cover Plate Using AutoCAST-X Software for Defect Minimization with Experimental

Validation”, Elsevier Procedia Materials

Science, Vol. 6, pp 786-797, 2014. 6. C M Choudhari, B E Narkhede and S K Mahajan,

“Modeling and Simulation for Optimum Design and Analysis of Riser in Sand Casting with Experimental

Validation”, Journal of Applied Mechanics and Materials, Vol.465-466, pp 657-661, 2014.

Published by Trans Tech Publications, Switzerland.


“Modeling and Simulation with Experimental

Validation of Temperature Distribution during Solidification Process in Sand Casting”, International Journal of Computer Applications, Vol 78(16) (ISBN: 973-93-80877-81-0), pp 23-29, 2013.

8. C M Choudhari, B E Narkhede and S K Mahajan, “Defect free casting by using simulation software”,

Journal of Applied Mechanics and Materials, Vol. 313-314, pp 1130-1134, 2013. Published by Trans Tech Publications, Switzerland.

9. A K Gajbhiye, C M Choudhari, D N Raut, B E Narkhede, B M Bhandarkar, “Minimization of

Shrinkage Porosity in A Sand Casting Process by Simulation in AUTOCAST-X Software with Experimental Validation by Destructive testing” at

International Journal of Modern Engineering

Research, ISSN: 2249–6645, Vol. 4, pp. 18- 27,

2014.

10. A R Narwade, C M Choudhari, B E Narkhede,

“Feeder design and analysis by casting simulation

software” at International Journal of Informative &

Futuristic Research, ISSN: 2347-1697, Vol. 1 no.9,

pp 281-291, May 2014.

Papers Presented in B. International Conferences (12) Conferences:

1. Choudhari C. M., Patil V. D., “Product Development

and its Comparative Analysis by SLA and FDM Rapid

Prototyping Processes”, International Conference on

Science and Technology for Sustainable Development

(ICSTSD-2016), May 2016.

2. C M Choudhari, B E Narkhede and S K Mahajan, “A

hybrid approach for casting process simulation by

combining FEM and VEM for defect minimization

with experimental validation”, 62nd Indian Foundry

Congress (IFC 2014), Ahmedabad, during 7th -9th

February, 2014, India.

3. C. M. Choudhari, B. E. Narkhede, and S. K.

Mahajan, “Optimum design and analysis of riser for

sand casting” Industrial Engineering and Engineering

Management (IEEM), 2013 IEEE International

Conference held at Bangkok TBD TH, pp. 1151-

1155, 2013.

4. D M Wankhede, C M Choudhari, Dr B E Narkhede,

“A Critical Study on Casting Defects in Light Metals”,

International Conference on Industrial Engineering

(ICIE-2013), organized by S.V. National Institute of

Technology, Surat, during 20th -23rd November 2013,

ISBN: 978-93-83083-4, pp 929-934, India.


“Finite Element Simulation of Temperature

Distribution during Solidification in Cylindrical Sand

Casting with Experimental Validation” 4th

International and 25th All India Machine Tool Design

and Research (AIMTDR 2012), organized by

Jadavpur University, Kolkata, during 14th -16th

December 2012, Vol 1, pp 1-6, India.


“Modeling and Simulation of Solidification in Metal

Casting for Defect Minimization” jointly organized by

Department of Science and Technology, Govt. of

India, New Delhi and Japan Society for Promotion

of Science, Tokyo (DST-JSPS) on

MANUFACTURING, DESIGN and INNOVATION

held at Indian Institute of Technology, Bombay

during 3rd - 8th December, 2012, India. 7. C M Choudhari, B E Narkhede and S K Mahajan,

“Characterization and Correction of Casting Defects by

Using Process Improvement Tool” at International

Conference on Recent Advances In Engineering,

Technology And Management (SPICON 2012), during

31st May- 2nd June 2012, Mumbai, India. 8. C M Choudhari, V D Patil “Direct Integration of

Reverse Engineering and Rapid Prototyping For Product Development” at International Conference on

‘Frontier in Mechanical Engineering, (FIME2010)

organized by National Institute of Technology,

Suratkal, pp 255-260, India. 9. C M Choudhari, B E Narkhede, “An Integrated

Approach to Product Development for Rapid Tooling

Based on Rapid Prototyping” at 2nd International

Conference on Production and Industrial Engineering

(CPIE-2010) organized by Dr. B. R. Ambedkar

National Institute of Technology, Jalandhar, Punjab, pp

316-320, India. 10. C M Choudhari, V D Patil, “Design and Development

of Vacuum Clamping System” in International

Conference on Advances in Machine Design and Industry Automation (ICAMDIA-2007) organized by

Govt. College of Engineering Pune in association with

corporate during 10-12 January 2007, pp.137-141,

India. 11. S M Khot, C M Choudhari, Nitesh P Yelve, Jitendra

K Sardar, “An Effect of System Parameters on Natural

Frequency of Beams by Using Statistical Method” 2nd

International Conference on ‘Computational

Mechanics and Simulation’ (ICCMS-06), Indian

Institute of Technology, Guwahati, during December

8-10, 2006, Vol. 1, pp 453-459, India. 12. C M Choudhari, Nitesh P Yelve “A Futuristic Study

on Harnessing Wind Energy”, International Conference

on Wind Energy: Trends and Issues (WETI 2006),

NITTTR Bhopal, during January 5-7, 2006, TP II/29-TP II/35, India.

National: --- C. National Conferences and Consortium (9)

1. Participated in the TEQIP II sponsored PhD colloquium

(Poster presentation), organized by V.J.T.I, Mumbai

during March 3-4, 2014.

2. Participated in the TEQIP II sponsored PhD colloquium

(Poster presentation), organized by V.J.T.I, Mumbai

during April 15-16, 2013.

3. Participated in the A National Level Doctoral

Consortium for Research Scholars organized by

V.J.T.I, Mumbai in association with Indian Institution

of Industrial Engineering (IIIE), Educ-Asia Ltd &

S.O.A. University Bhubneswar, January 11, 2013.

4. Participated in the A National Level Doctoral

Consortium for Research Scholars organized by

V.J.T.I, Mumbai in association with Indian Institution

of Industrial Engineering (IIIE), Educ-Asia Ltd during

March 12-16, 2012.

5. Presented a poster at Poster presentation for Research

Scholars organized by V.J.T.I, Mumbai on February

29, 2012. 6. N N Deshmukh, C M Choudhari, “Continuous

Temperature Monitoring System In Engineering

Application Using NI Lab View” in the Global conference on ‘Production and Industrial Engineering’

(CPIE – 2007) organized by Dr. B. R. Ambedkar

National Institute of Technology, Jalandhar, Punjab

during March 22-24, 2007, pp. 116-120, India. 7. S M Khot, C M Choudhari, Nitesh P Yelve, Jitendra

K Sardar, “An Investigation on Effect of System

Parameters on Natural Frequency of Cantilever Beam by Using Taguchi Method and ANOVA” in the

National Conference on Emerging Trends in

Mechanical Engineering (ETIME- 2006) organized by

B.M.S. college of Engineering, Bangalore during

February 11-12, 2006, pp. 77-83, India. 8. N Venugopal, C M Choudhari, Nitesh P Yelve “An

Investigation on Vibration Characteristics of Visco-

elastic Materials by Using Taguchi Method, ANOVA

and Factor Plots ” in the National Conference in Recent

Advances In Manufacturing Technology (RAMT-2006)

organized by Velammal Engineering College, Chennai

on 3rd

February 2006, pp. 106-111, India. 9. N Venugopal, C M Choudhari, Nitesh P Yelve, “An

Investigation on Vibration Characteristics of Visco-

elastic Materials by Using Taguchi Method and

ANOVA” in the National Conference on Recent

Trends In Manufacturing (NCRTM-2006) organized by

K.I.T.’S College Engineering, Kolhapur, during 7-8

January, 2006, pp. 90-94, India.

Details of Short Term Courses Attended (17): 1. One week AICTE sponsored Faculty Development

Programme on “Fundamentals of Project

Management”, organized by V.J.T.I., Mumbai during

February 24-28, 2015.

2. One week TEQIP II sponsored Short Term Course on

“Research Methodology”, organized by V.J.T.I.,

Mumbai during February 3-7, 2014.

3. One week TEQIP sponsored Staff Development

Programme on “Project Management for Industry”,

organized by V.J.T.I., Mumbai during January 12-16,

2014.

4. One week TEQIP II sponsored Faculty Development

Programme on “Program Management Tools and

Techniques” organized by V.J.T.I., Mumbai during

August 22-26, 2013.


Programme on “CFD in

Engineering domain using Computing Softwares”

organized by V.J.T.I., Mumbai during July 8 -12,

2013.


Programme on “Recent trends in Finite Element

Method and Introduction to Boundary element and

Mesh Free Method”, organized by V.J.T.I., Mumbai

during February 18-22, 2013.


Programme on “Industrial Engineering Tools and

Techniques”, organized by V.J.T.I., Mumbai during

March 12-16, 2012.

8. One week Training Programme on “Research

Methodology: Tools and Techniques” organized by

Indian Institute of Roorkee during December 12-16,

2011.

9. One week AICTE sponsored Staff Development

Program on “Advances in the Manufacturing and

Micromachining Techniques”, organized by V.J.T.I.,

Mumbai during November 14-18, 2011.

10. One week Quality Improvement Programme on

“Rapid Product Development” organized by I.I.T.

Guwahati during December 11-15, 2006.


“Computer Aided Design and Manufacturing”

organized by I.I.T. Guwahati during December 12-16,

2005.


“Finite Element Analysis & Signal Processing in

Rotating Machineries” organized by I.I.T. Guwahati

during December 19-23, 2005.

13. Two week Short Term Training Programme on “Computer Integrated Product Design and

Manufacturing” (CIPDM)” organized by Karunya

Institute of Technology And Sciences, Deemed

University, Coimbatore during October 25-November

5, 2004.


“Innovative Tribo - Design” organized by I.I.T. Bombay during November 15-19, 2004.

15. One week Short Term Training Programme on “Concurrent Engineering - A Modern Approach to

Product Development” organized by S.R.K.R.

Engineering College, Bhimavaram, during December

27-31, 2003.

16. Two week Short Term Training Programme on

“Advanced Computational Techniques [ACT-2003]”

organized by L.D. College of Engineering,

Ahmedabad, during December 1-12, 2003.

17. One week training Programme in Rolta India Ltd. on

“Introduction to Pro/E wildfire 2.0” during July 11-15, 2003.

PhD Guide : Approved Ph. D. Guide in Mumbai University.

Field: Mechanical Engineering

University University of Mumbai

PhDs / Projects Guided : Presently guiding 2 students at the Fr CRIT, Vashi, Research

Centre, University of Mumbai

Projects Guided at Post Graduate level /Masters level: 10

Projects Guided at Graduate level: 22


Professional Memberships :

Life Member, Indian Society for Technical Education (ISTE) (LM 46481).

Life Member, Indian Institution of Industrial

Engineering (IIIE) (LM 9391). Consultancy Activities :

Awards : --

Grants fetched : Achieved a Minor Research Grant Sanction of Rs.30,000/- for the project titled “Simulation and Experimental Study of minimization of shrinkage defect in casting” in the year 2014-15 (Ref No.: APD/237/351 of 2014, 13 October, 2014.

Interaction with :


Name of Teaching Staff : Prof. Prasad S. Shirodkar Designation : Assistant Professor



Qualifications with Class / : 1. M.E. (Mechanical Engg.) ,Ist Class with distinction (72.77 %)

Grade from University Of Mumbai in April, 2002.

2. M.S. (Mechanical Engg.), GPA: 3.60 from Michigan Technology

University, Houghton, MI.

3. B.E (Mechanical Engg.) ,Ist Class from University of Mumbai in

January, 1999.


1. Assistant Professor, D.J. Sanghvi College of Engineering from 11.7.2011 till date

2. Lecturer, Sardar Patel Institute of Technology, from July, 2010 to May, 2011.

3. Lecturer ,Sardar Patel College of Engineering, from 2007 to 2010. 4. Part-Time Intern, Helwig Carbon Products, Inc., Milwaukee, WI

from November, 2006 to March, 2007. 5. Teaching/ Research Assistant, Michigan Technological University,

Houghton, Michigan from September, 2004 to August, 2006. 6. Lecturer, K.J. Somaiya Institute of Engg. & Information

Technology from October, 2001 to June, 2004.

Industry: ----

Research: ---

Papers Published: International: 3 1. Kumar V, D.J. Bee, P.S. Shirodkar, B.P. Bettig and J.W. Sutherland, “Towards Sustainable Product & Material Flow Cycle: Identifying Barriers to Achieving Product Multi-use and Zero Waste”, Proc. of ASME Manufacturing Engineering Division, 2005, (IMECE2005-81347), appeared on CD-ROM.

2. Shirodkar P.S., V.Kumar. M.E. Jarvie& J.W. Sutherland,” Exploring Value Flow in the Product Life cycle to Promote Successful Value Recovery,” Proceedings of Sustainable Manufacturing IV-Global Conference on Sustainable Product Development and Life Cycle Engineering, Sao Carlos, Sao Paulo, Brazil, 2006, paper # LCA02.

3. Kumar.V, P.S.Shirodkar, J.A. Camelio& J.W. Sutherland, “Value Flow Characterization during Production Lifecycle to Assist in Recovery Decisions, “International Journal of Production Research, vol.45, no.8,2007, pp.4555-4572.

National: ---

Papers Presented in Conferences: International: ---

National: ---

PhD Guide? Give field & : Field: ----

University University: ----

PhDs / Projects Guided : PhDs : ---- Projects at Masters level: ----


Professional Memberships : --


Awards : 1. Henes Fellowship: Fall 2005 2. Appointed Graduate Scholar of Sustainable Futures Institute.

3. IGERT Associate (NSF funded 5-year project): Spring 2005-

Spring 2006.

Grants fetched : --



Name of Teaching Staff : Prof.Vyankatesh U. Bagal Designation : Assistant Professor

Department : Mechanical Engineering Date of Joining the Institution : 11.7.2012

Qualifications with Class / Grade : 1. M.E. (Heat Power Engg.) Shivaji University, 75.49%, May –

2007.

2. B.E. (Mechanical Engg.) Shivaji University, 69.67%, Jul –

2002.

Total Experience in Years : Teaching: 5 Years 1. Assistant Professor, D.J. Sanghvi College of Engineering from 11.7.2012 till date.

2. Assistant Professor, St. John College of Engineering &

Technical from Jun’ 2010 to Jun’ 2012.

Industry: 5 Years 1. Deputy Manager – Mahindra & Mahindra Ltd, from Aug’ 2006

to Jun’ 2010. 2. Production Engineer – Elle Elec Pvt Ltd, from Apr’ 03 to

Jun’04.

Research: ---

Papers Published: International: ---

National: ---


International: Bagal, V. and Mulemane, A., "Aerodynamic Drag Simulation and Validation of a Crossover," SAE Technical Paper 2010-01-0757, 2010, doi:10.4271/2010-01-0757.

National: ---



PhDs / Projects Guided : PhDs : ----

Projects at Masters level: ----




Awards : --

Grants fetched : --



Name of Teaching Staff : Prof. Rajnarayan Yadav Designation : Assistant Professor



Qualifications with Class / Grade : 1. M.Tech. – Banaras Hindu University, First Class, May – 2009.

2. B.E. (Mechanical Engineering), University of Mumbai, First Class, May – 2005.

Total Experience in Years : Teaching: 3 Years 1. Assistant Professor, D.J. Sanghvi College of Engineering from 2.7.2012 till date.

2. Assistant Professor, PVPP College of Engineering, from

Feb’ 2012 to Jun’ 2012.

3. Asst. Professor – JSS Academy of Technical Education,

from Apr’ 2011 to Feb’ 2012.

4. Asst. Professor – ITS Engineering College Gr. Noida, Oct’

2009 to Apr’ 2010.

Industry: 1 year

Enginemates Heat Transfer

Ltd.,Mulund,fromjune2006tojune2007

Research: ---

Papers Published:

International: --- National: ---


National: ---




Books Published / IPRs / Patents Professional Memberships : --

Consultancy Activities : -- Awards : --

Grants fetched : --



Name of Teaching Staff : Prof Prashant Frank Crasta

Designation : Assistant Professor



Qualifications with Class / Grade : M.Tech., Materials (Science) Engg, KREC, Mangalore University, 71%, I Class Distinction ,1994 B.E. Metallurgical Engg, KREC, Mangalore University, 67%, I Class, 1991.


Assistant Professor in D.J. Sanghvi College of Engg. from 22.07.2013 to till date.. Associate Professor SMVITM,Udupi From August 2012 to July 2013. Associate Professor MIT-Kundapura From Sept 2011 to August 2012.

Industry: Manager, Mukand Ltd., Thane From Sept 1996 to August 2011

Engineer, Bhandary Industrial Metals Ltd. Goa From: August 1995 to August 1996. Graduate Engineer Trainee Automotive Axles Ltd., Mysore, From: August 1994 to August 1995 and Sept 1991 to June 1992 Research : Papers Published:

International: ---

National: --- P. Frank Crasta, S. C. Kuiry, Amit Ganguly, “Effect of Tempering on Destabilized Microstructure of Ni-Hard”, in Transactions of Indian Institutes of Metals Vol. 52, No. 5, October 1999 Chirag Gandhi, P Frank Crasta, K N Vijay Kumar, “Improving Quality Parameters of Steel Balls Affecting Noise in Ball Bearing”, International Research Journal of Engineering and Technology (IRJET) ISSN : 2395-0056, Volume 3, Issue 6, June 2016. Chirag Gandhi, P Frank Crasta, K N Vijay Kumar, “Study of Vibration Generated in Steel Balls Creating Noise in Ball Bearings”, International Research Journal of Engineering and Technology (IRJET) ISSN : 2395-0056, Volume 3, Issue 6, June 2016. Kavita Thakur, P Frank Crasta, “Enhancing Ink Mileage”, International Journal of Research in Engineering and Applied Science (IJREAS) ISSN : 2249-3905, Volume 6, Issue 6, June 2016,. Kavita Thakur, P Frank Crasta,“Utility of Six Sigma Application”, International Research Journal of Engineering and Technology (IRJET) ISSN : 2395-0056, Volume 3, Issue 8, June 2016.


International: --- “Effect of Tempering on Destabilized Microstructure of Ni-Hard Ring Casting”,

in Asian Foundry Congress at Calcutta in 1999. National: --- “Optimization Techniques a Review”, at MHSSCOE, Mumbai, 2014. PhD Guide? Give field & : Field: ----

University University: ---- PhDs / Projects Guided : PhDs : ----

Projects at Masters level: ----02 Books Published / IPRs / Patents

Professional Memberships : --Life Member of Indian Society for

Technical Education (ISTE) Consultancy Activities : --

Awards : --

Grants fetched : --



Name of Teaching Staff : Prof. Dhaval Birajdar Jinadatt Designation : Assistant Professor


Date of Joining the Institution 09.07.2013

Qualifications with Class / Grade : 1. B.E. (Mechanical), University of Mumbai, Ist class,

62.53% , September 2009

2. M.E. (Thermal), University of Mumbai, Ist class 61.53%,

September 2012


1. Assistant Professor in D.J. Sanghvi College of Engg. from 09-07-2013 till date.

2. Assistant Professor in St. Franics Institute of Technology

From: 2nd July, 2012

Industry:

1 year experience as Project Engineer

Research: ---

Papers Published:



National: ---






Grants fetched : --



Name of Teaching Staff : Prof Vinit Katira Designation : Assistant Professor



Qualifications with Class / Grade : M.E. Thermal Engg., Sardar Patel College of Engg., August

2013

B.E. Mechanical Engg., Mumbai University, May 2011


1. Assistant Professor inD.J. Sanghvi College of Engg. from 08-07-2014 till date.

Industry:

1. Research Assistant, I.I.T. Bombay, Mumbai, from July

2013- July 2014.

Research: - “Experimental and numerical investigations on

melting and solidification of pure lead in rectangular and

cylindrical enclosures”

Papers Published:



National: ---






Grants fetched : --



Name of Teaching Staff : Rohitkumar Chaurasia

Designation Assistant Professor :

Department Mechanical Engineering Department :

Date of Joining the Institution 05/01/2015 :

Qualifications with Class / Grade : M.E. (Machine Design) With First class

B.E. (Automobile Engineering) First class with Distinction

Total Experience in Years : Teaching:4 Years 5 month

Industry:1 year

Research: --

Papers Published: International: --- National: --- Design analysis and Experimental verification of Torispherical and Toriconical bottom pressure vessel


National: ---




Design analysis and Experimental verification of Torispherical and Toriconical bottom pressure vessel




Awards : --

Grants fetched : --



Name of Teaching Staff : PATANKAR PRASHANTKUMAR RAMESH

Designation : ASST. PROFESSOR

Department : MECHANICAL ENGG.

Date of Joining the Institution : 21/01/2015

Qualifications with Class / Grade : M.E.-Mechanical(Machine Design)


Industry:01Year

Research: --

Papers Published:

International: --- National: --- 01


National: --- 01

PhD Guide? Give field & : Field: ---- University University: ----





Grants fetched : --



Name of Teaching Staff : Mr. Ramesh R. Rajguru


Department : Dept. of Mechanical Engg.

Date of Joining the : 12.07.2011

Institution

Qualifications with Class / : (1) Ph.D. (Mechanical Engg.) Pursuing.

Grade

(2) M.E. (Mechanical Engg.), Dec. 2013, Ist class, 69.20%,

Mumbai University.

(3) B.E., Sardar Patel College of Engineering from Mumbai

University, First Class with distinction (82.55%).

Total Experience in Years : Teaching: 06 years and 06 Months

1. Assistant Professor in Mechanical Engg. From 04-07-

2012 till date.

2. Lecturer in Mech. Engg., Dwarkadas J. Sanghvi College

of Engg. from 12-07-2011 till 30-06-2012.

3. Visiting lecturer in Mechanical Engineering, Sardar Patel

College of Engineering from 29-7-2010 to 29-04-2011.

Industry: 03 years

1. Worked as Production Officer in Production Sub-

Assembly, Department of 118NE Car, PAL-PEUGEOT

Ltd. Dombivli from 02/05/1995 to 30/06/1997.

2. Worked as Production Engineer at Aero -Tech Ducon

India Pvt. Limited at TTC Rabale, Nav Mumbai from

01/07/1997 to 30/06/1998.

Papers Published in : National:-- 01

Journals

(1) “A Review of Machining Processes and Machinability in

the case of GFRP Composite Materials” in IPI journal (The official publication of Indian Plastics Institute), August/September 2013,Vol.18, issue 3, ISBN 978-81-927125-0-5 (with Dr. Hari Vasudevan).

International :-- 09

1) "Optimization Of Multi-Performance Characteristics in the

Turning Of GFRP(E) Composites using Principle Component Analysis combined with Grey Relational Analysis” accepted

for publication in Elsevier Materials today Proceedings and

presented in ICMPC (International Conference on Material

Processing and Characterization) held during 17th to 19th

March 2017 at Gokaraju Rangaraju Institute of Engineering

and Technology,Hyderabad (With Dr. Hari Vasudevan, and

Kalpesh).

2) “Grey Fuzzy Multiobjective Optimization of Process Parameters for CNC Turning of GFRP/Epoxy Composites” in Elsevier Journal “Procedia Engineering” vol. 97 (2014) pp. 85 – 94 (doi: 10.1016/j.proeng.2014.12.228) (with Dr. Hari Vasudevan and Naresh Deshpande)

3) “Multiobjective Optimization of Drilling Characteristics

for NEMA G -11 GFRP/Epoxy Composite using Desirability

Coupled with Taguchi Method ” in Elsevier Journal

“Procedia Engineering” vol. 97 (2014) pp. 522 – 530 (doi:

10.1016/j.proeng.2014.12.278) (with Dr. Hari Vasudevan and

Naresh Deshpande)

4) “A study on Edge Milling Operation of NEMA G11 GFRP Composites based on Grey-Taguchi method” in the international journal Applied Mechanics and Materials -

ISSN:660-9336, (doi:10.4028/www.scientific.net/AMM.592-594.18) Vols. 592-594 (2014) pp.18-22, (with Dr. Hari

Vasudevan and Naresh Deshpande)

5) “Desirability Fuzzy Multiple criteria Optimization of

Process Parameters in CNC Turning of GFRP/ Vinyl ester Composites” in Elsevier published Journal “Procedia Material Science” Vol. 5 (2014) pp. 2458 – 2467 (with Dr.

Hari Vasudevan and Naresh Deshpande). DOI: 10.1016/j.mspro.2014.07.497

6) “Experimental Investigation and Optimization in Edge Milling of NEMA G-11 GFRP/Epoxy Composites” presented

in Elsevier published Journal “Procedia Material Science” Vol. 5 (2014) pp. 2105 – 2114 (with Dr. Hari Vasudevan and Naresh Deshpande). DOI: 10.1016/j.mspro.2014.07.546

7) “Investigation of the Machinability Characteristics of GFRP/ Epoxy Composites using Taguchi Methodology” in

the international Journal of Applied Mechanics and Materials

(AMM) Vol. 612 (2014) pp 123-129, as a special volume

titled “Advanced Research in Design, Manufacturing and

Materials”. Published by Trans Tech Publications Ltd

Switzerland,(doi:10.4028/www.scientific.net/AMM.612.123)

(with Dr. Hari Vasudevan and Naresh Deshpande).

8) “Investigation of the machinability characteristics of

GFRP/vinyl ester composite using design of experiments ”, in

the International Journal of Machining and Machinability of

Materials: Special issue on Machining of Advanced

Materials, Inderscience 2014, Vol.15, No.3/4, pp.186 – 200

ISSN (Online): 1748-572X - ISSN (Print): 1748-5711. (with

Dr. Hari Vasudevan and Naresh Deshpande) DOI: 10.1504/IJMMM.2014.060549

9) “Exploring the performance of a Single Cylinder Diesel

Engine with alternative fuels such as CME and CME-Diesel Blends” in the International Journal of Current Engineering

and Technology, InPressco International Press Corporation, Vol. 3, Issue 3, pp.1-4, ISSN 2277-4106 (with Dr. Hari

Vasudevan, Sandip Mane and Naresh Deshpande).

Papers Published in : National:-- 02

conferences (1) “Delamination in Machining of Composite Materials: A

Review in the Context of Drilling Operation” in the National

Conference on Emerging Trends in Engineering, NCETE-13,

during 4th & 5th January 2013, organized by M.H.Saboo

Siddik College of Engineering, Byculla, Mumbai.

International :-- 17

1) “Grey Fuzzy Multiple Criteria Optimization of Process Parameters for CNC turning of GFRP/Vinyl Ester Composites”, presented at 1st International Conference on

Materials, Manufacturing and Design Engineering. (ICMMD -2016) held at Dr. Babasaheb Ambedkar Technological

Universit, Lonere, Maharashtra, India, during December 20-21, 2016. (with Dr Hari Vasudevan and Naresh Deshpande) 2) “Multiple Criteria Optimization of Process Parameters

for Edge Milling of NEMA G11 Composites using Desirablity

Function Analysis”, presented at 1st International Conference

on Materials, Manufacturing and Design Engineering.

(ICMMD-2016) held at Dr. Babasaheb Ambedkar

Technological Universit, Lonere, Maharashtra, India, during

December 20-21, 2016. (with Dr Hari Vasudevan and Naresh

Deshpande)

3) “Optimization of Cutting Parameters for Surface

Roughness in Machining of GFRP Composites”, presented at

6th International & 27th All India Manufacturing

Technology, Design and Research Conference (AIMTDR-

2016) held at College of Engineering Pune, Maharashtra

India, during December 16-18, 2016. (ISBN: 978-93-86256-

27-0) (with Dr. Hari Vasudevan, Naresh Deshpande, Kalpesh

Tank and Aman Tukrel). 4) “Optimization of Material Removal Rate and Cutting Forces in Turning of GFRP composites” in the 6th International & 27th All India Manufacturing Technology,

Design & Research Conference (AIMTDR–2016) held at

College of Engineering, Pune during 16-18 December 2016 (With Dr. Hari Vasudevan, Kalpesh and Mandar). 5) “Solar Energy a Viable Alternative: A Review” in ICAME2015 held during 15th & 16th of October 2015,UCEV, Villupuram, Vol1, ( with Punit Sanghavi, Chirag Pandya and Raj Hemani). 6) “Optimization of turning parameters for Glass Fibre Reinforced Plastic (GFRP/E) using Grey Relational Analysis coupled with Taguchi method” in ICAME2015 held during 15th & 16th of October 2015,UCEV, Villupuram, Vol1, (Kalpesh N. Tank, Mandar S. Rao, Rahil S. Sheth). 7) “Utility Fuzzy Multiobjective Optimization of Process Parameters for CNC Turning of GFRP/Epoxy Composites”,

presented at 5th International & 26th All India

Manufacturing Technology, Design and Research

Conference (AIMTDR-2014) held at Indian Institute of

Technology Guwahati, Assam, India during December 12-14,

2014. (ISBN: 978-8-19274-610-4) (with Dr. Hari Vasudevan

and Naresh Deshpande)

8)“Experimental Investigation and Optimization of Milling

Parameters in the Machining of NEMA G -11 GFRP

Composite Material using PCD Tool” , presented in the

International conference on All India Manufacturing Technology, Design and Research (AIMTDR-2014) held at

Indian Institute of Technology Guwahati, Assam, India during December 12-14, 2014. (ISBN: 978-8-19274-610-4)

(with Dr. Hari Vasudevan and Naresh Deshpande)

9)“Utility Fuzzy Multicriteria Optimization of Process Parameters in CNC Turning of GFRP/ Vinyl ester Composites” presented in the ICMMM2014 conference held

at Indian Institute of Technology Madras, Chennai, during August 8-9, 2014. (ISBN 978-93-80689-18-0) (with Dr. Hari

Vasudevan and Naresh Deshpande)

10) “Grey fuzzy optimization of milling parameters for G-11

GFRP/Epoxy composites with multiple performance

characteristics” presented in the ICMMM2014 conference

held at Indian Institute of Technology Madras, Chennai,

during August 8-9, 2014. (ISBN 978-93-80689-18-0) (with

Dr. Hari Vasudevan and Naresh Deshpande)

11)“Multi Criteria Decision Making using Fuzzy Inference System : A Case in Manufacturing” presented in the ICCICCT

2014 conference organized by Noorul Islam centre for higher

education, Noorul Islam university, Kumaracoil, Tamilnadu,

India, from July 10-11, 2014. pp.1280 – 1286. (ISBN: 978-1-

4799-4191-9) (doi:10.1109/ICCICCT.2014.6) (IEEE Xplore)


12)“An Experimental Investigation into the Optimization of Cutting Force in CNC Turning of Woven Fabric based GFRP/Epoxy Composites using PCD Cutting Tool” presented

in the International Conference on Design, Manufacturing and

Mechatronics organized by Trinity college of engineering and

research Pune, Maharashtra, from 9th – 10th Jan.2014 . (with

Dr. Hari Vasudevan and Naresh Deshpande)

13)“An Experimental Study on the Performance and Emission Characteristics of a Single Cylinder Diesel Engine Using CME-Diesel Blends”, in the International Conference on Renewable Energy and Sustainable Development (ICRESD- 2014) organized by KJEI’s Trinity College of Engineering and Research, Pune from 9th to 10th January 2014 (with Dr. Hari Vasudevan, S. Mane and Naresh Deshpande).

14) “Analysis of a Multi-criteria optimization problem using

Taguchi and Grey relational analysis: A case study in the

machining of composite materials” in the International

Conference on Advances in Mechanical Engineering organized

by the department of Mechanical Engineering, College of

Engineering Pune, Maharashtra, from 29th-31st May 2013 .


15)“Study of Cutting Force in CNC Turning of Woven Fabric

based GFRP/Vinylester Composites using PCD Cutting

Tool” in the International Conference on Advanced

Manufacturing and Automation (INCAMA-2013, ISBN 978-

93-80686-50-9) organised by the Department of Mechanical

Engineering (DST-FIST Sponsored) Kalasalingam

University, Madurai, Tamil Nadu from the 28th-30th March

2013 . (with Dr. Hari Vasudevan and Naresh Deshpande)

16)“Multi-criteria optimization using Taguchi and Grey

relational analysis in CNC drilling of GFRP/E composite

material” in the International Conference on Advanced

Manufacturing and Automation (INCAMA-2013, ISBN 978-

93-80686-50-9) organised by the Department of Mechanical

Engineering (DST-FIST Sponsored) Kalasalingam

University, Madurai, Tamil Nadu from the 28th-30th March

2013. (with Dr. Hari Vasudevan and Naresh Deshpande)

17)“Recent Trends and Developments in the use of Woven

Fabric Reinforcements for Composite Materials” in the

International Conference on Innovations in Automation and

Mechatronics Engineering 2013 (ICIAME-2013,ISBN 978-

81-924744-03), organised by G.H.Patel College of

Engineering & Technology, Vallabh Vidyanagar, Gujarat,

India, 21-23 February 2013. (with Dr. Hari Vasudevan and

Naresh Deshpande)

Research Grants : Received University of Mumbai Minor Research Grant (Sr.

No. 388) of ₹ 45000 during 2015-16, for project titled “Grey

Relational Analysis for Minimising Surface Roughness of

Milled NEMA GII GFRP Plates” (with Dr. Hari Vasudevan).

Professional Memberships : Life Member of I.S.M.E. (Indian Society of Manufacturing

Engineers).

Reviewer : Indian Journal of Engineering & Materials Sciences,

Publisher: National Institute of Science Communication and Information Resources Dr K S Krishnan Marg, New Delhi 110

012, INDIA.

Guest Lecture / : 1. Delivered an Expert talk on “Components of Composites

Technical Talk and Manufacturing Processes of Composites” at Shri

Bhagubhai Mafatlal Polytechnic, VileParle west, Mumbai.

Name of Teaching Staff : Prof. Pavan Rayar




Qualifications with Class / Grade : M.E . CADCAM AND ROBOTICS

7.41 (FIRST CLASS) BE MECHANICAL

79.52 (DISTINCTION) Total Experience in Years : Teaching:

05 years Lecturer in Vidyavardhinis college of Engineering 01 years

D J Sanghavi college of Engineering till date

Research :

Papers Published:

International: ---

National: ---

Papers Presented in

Conferences: International: --- Design analysis and testing of Aerofoils for high lift at low Reynolds number: A Review

National: ---



Projects at Masters level: ---- Books Published / IPRs / Patents



Awards : --

Grants fetched : --



Name of Teaching Staff : Prof. Bronin Cyriac




Qualifications with Class / Grade : M.E. Thermal Engineering, PIIT, Mumbai University, 8.81

CGPI, 2015.

B-Tech. Mechanical Engineering, AJCE, MG University, 73%, 2011.

Total Experience in Years : Teaching: 5 years

1. Assistant Professor in DJSCE from January 2016 to till date.

2. Assistant Professor in SCOE from July 2015 to December 2015

3. Assistant Professor in LTCOE from July 2014 to April 2015

4. Lecturer in VESIT from July 2013 to July 2014 5. Lecturer in PIIT from July 2012 to July 2013

6. Lecturer in VESIT from August 2011 to July 2012

Industry:-

Research :

Papers Published:

1. Bronin Cyriac, Prof. A.G. Shaligram, Prof.

MD Nadar " CFD Modelling of finned tube gas cooler

for transcritical operation of CO2systems" International Journal of Mechanical Engineering and Robotic

Research, Vol. 4, No.1, January 2015 ISSN: 2278-0149.

International: --- 2. Bronin Cyriac, M.D. Nadar, A.G. Shaligram, “Effect of

operating parameters on the performance of fin and

tube gas cooler for trans-critical operation of CO2 heat pumps”, International Journal of Advanced Technology

in Engineering and Science (ISSN: 2348-7550), Volume No 03, Special Issue No. 01, September 2015

National: ---

Papers Presented in

Conferences:

1. Bronin Cyriac, M.D. Nadar, A.G. Shaligram, “Effect of

operating parameters on the performance of fin and

tube gas cooler for trans-critical operation of CO2 heat

International: --- pumps”, 2nd International Conference on Science, Technology and Management (ICSTM-15), ISBN: 978- 81-931039-6-8 , University of Delhi (DU), Conference

Centre, New Delhi, September,2015.

National: ---




Books Published / IPRs / Patents Applied for patent for the project Pepper

Separator (Patent File No:1979/CHE/2013)



Awards : --

Funding of one lakh by NSTEDB, DST

Grants fetched : Government of India for the project

‘Pepper Separator’. Interaction with : --


Name of Teaching Staff : Prof Greegory Mathew

Designation : Assistant Professor Department : Mechanical Engineering


Qualifications with Class / Grade : M.Tech. Machine Design, SPCE, Mumbai University,

9.38 CGPI, 2015. B.E. Mechanical Engg, VCET, Mumbai University, 62%,

May 2010. Total Experience in Years : Teaching:

Assistant Professor in Sardar Patel College of Engg from 05-06-14 to 31-12-15 Assistant Professor in D.J. Sanghvi College of Engg. from 11-01-2016 to till date. Industry: 1 year as Trainee engineer, Evergreen Engineering Co. Pvt. Ltd. 1 year as Project trainee, Larsen and Toubro EAIC.

Research :

Papers Published:

International: --- Reliability estimation of moulded case circuit breaker through experimental degradation analysis, International Journal on Mechanical Engineering and Robotics, Volume-4, Issue-1, 2016, ISSN (Print) : 2321-5747. (with Krishna Gaikwad)

National: ---

Papers Presented in

Conferences: International: ---

National: ---






Awards : --

Grants fetched : --



Name of Teaching Staff : Prof. Dhananjay S. Shukla



Qualifications with Class / Grade : 1. M.Tech (Mechanical Engineering with specialization in

Thermal Engineering, 1st Class with Distinction (9.8CPI),

1st in VJTI - Gold Medalist, University of Mumbai, July

2013. 2. B.E. (Mechanical Engineering), 1st Class with Distinction (79.50%), 6th Rank in University of Mumbai, 1st Rank in

S.S. Jondhale College of Engineering, University of

Mumbai, May 2010.

Total Experience in Years : Teaching: 4.1 years 1. Assistant Professor, Dwarkadas J. Sanghvi College of Engineering from 05.01.2015 till date. 2. Assistant Professor, Konkan Gyanpeeth College of Engineering from 10.01.2014 to 22.08.2014. 3. Assistant Professor, A.C. Patil College of Engineering from 05.08.2013 to 23.12.2013. 4. Lecturer, S.S. Jondhale College of Engineering from

21.09.2010 to 19.06.2011. Industry: ----------------

Research : -----

Papers Published: International: --- Journal “Experimental Study of Iodine Removal Efficiency

In Self-Priming Venturi Scrubber” published in Annals of

Nuclear Energy. Ms. Ref. No.: ANUCENE-D-14-00260R2.

National: --- ----- Papers Presented in

Conferences: International: --- -----

National: ---







Awards : Won FIRST Prize in Essay competition

(at school level) in the year of 2002

organized by Kalyan Rotary Club.

Grants fetched : --



Name of Teaching Staff :Prof. Kartik Ajugia



Qualifications with Class / Grade : M.Tech Thermal SPCE, Mumbai University, 8.02 CGPI,

2016. B.E. Mechanical KJSCE, Mumbai University, 60.4%, May 2009.


Lecturer in SJCET from 16/06/2010 to 31/12/2015 Assistant Professor in D.J. Sanghvi College of Engg. from 04/01/2016 to till date. Industry: 1 year as a Production Engg in EBCO Pvt Ltd.

Research :

Papers Published:

International: --- Numerical comparison of the Tube Bank Pressure Drop using a Conventional Nozzle position and an Inline Nozzle

position of a Shell and Tube Heat Exchanger National: ---

Papers Presented in Numerical Analysis of the Tube Bank

Conferences: Pressure Drop of a Shell and Tube Heat

Exchanger

International: ---

National: ---






Awards : --

Grants fetched : --



Name of Teaching Staff :Prof. Shashikant Auti



Qualifications with Class / Grade : M.Tech – Mechanical (Automobile), (V.J.T.I.) Mumbai,

Mumbai University, 7.8 CPI, 2014. B.E. Mechanical Engineering, SCOE, Pune, University of

Pune, 67%, 2011. Total Experience in Years : Teaching: 04 yrs

Veermata Jijabai Technological Institute : As a Teaching Assistant 2012 – 2014 Marathwada Mitramandal's College of Engineering : As a Lecturer 2014 – 2015 Forbes Marshall, Kasarwadi Pune : Instructor for preparatory Classes for M.tech Entrance Exam (Sponsored Quota), May and June 2015 MITAOE, Alandi, Pune : As an Assistant Professor 2015 – 2016

Industry: 01 yrs Piaggio Vehicles Private LTD. Baramati, Pune : As Graduate Engineer Trainee (GET) 2011 – 2012

Research : Automotive Shredder Residue Treatment

and Recycling of ELV

Papers Published:

International: --- 1.“Homogeneous Charge Combustion Engine” in International Journal of Global Technology Initiatives (ISSN No. Print/Online : 2277-6591 / 2320-1207 ) Volume 3, Issue 1,

March 2014 National: ---

Papers Presented in

Conferences: International: --- 1.“Homogeneous Charge Combustion Engine” in

International Journal of Global Technology Initiatives (ISSN No. Print/Online : 2277-6591 / 2320-1207 ) Volume 3, Issue 1,

March 2014 National: ---






Awards : --

Grants fetched : --



Name of Teaching Staff : Prof. Ravikant S. Hattale




Qualifications with Class / Grade : M.Tech. (Industrial Metallurgy), NIT Warangal, CGPA, 2016 B.E. (Mechanical Engg.), Shivaji University, 63.93%, May 2013


Assistant Professor in D.J. Sanghvi College of Engg. From 09-01-2017 till date.

Industry:

Research : One year research experience at CSIR-CGCRI (Central Glass and Ceramic Research Institute), Kolkata.

Papers Published:

International: ---

National: ---

Papers Presented in

Conferences:

International: --- Synthesis and Characterization of Molybdenum doped spin coated Nanostructured V2O5 thin films, International Conference on Ceramic and Advanced Materials for Energy

and Environment, Christ University , Bangalore, 14th

-17th

December 2015, page 136-137.

National: --- Novel Soft Chemical Synthesis of Transition Metal Doped Smart Thin Films, National Conference on Recent Trends in Functional Materials in Relation to Nanotechnology and Nanomaterials (RTFMNN), Saint Paul College, Kolkata, 4

th -

5th

February 2016, page-216. PhD Guide? Give field & : Field: ----







Awards : --

Grants fetched : --



Name of Teaching Staff :Prof Sachin Kamble



Qualifications with Class / Grade : M.Tech. Automobile Engg, V.J.T.I, Mumbai University,

7.3 CGPI, 2014. B.E. Mechanical Engg, SVERI COE Pandharpur, Solapur

University, 67%, May 2012. Total Experience in Years : Teaching:

Assistant Professor in D.J. Sanghvi College of Engg. from 20-07-2015 to till date. Industry:

Research :

Papers Published:

International: ---

National: ---

Papers Presented in

Conferences: International: ---

National: ---






Awards : --

Grants fetched : --



Name of Teaching Staff : Prof (Ms) Shreya Kadwadkar Designation : Assistant Professor



Qualifications with Class / Grade : B.E. Mechanical Engg., Shivaji University, 69% May 2002

Total Experience in Years : Teaching: 1. Assistant Professor inD.J. Sanghvi College of Engg. from 06-07-2013 till date.

2. Lecturer, Thakur College of Engg. from August 2011 - June 2013

Industry: 1. Sr. Executive ProjectsGodrej & Boyce Mfg Co.

Ltd.,From July 2007 to October, 2008 2. Sr. Technical Consultant3D Engineering, July 2004 to July

2007 3. Assembly Supervisor, Hirlekar PrecisionFrom July 2002

to June 2004 .

Research: --- Papers Published: International: --- ‘Optimization Of Turning Process Parameters In The Machining Of An Accumulator (Mdn-250) Using

Taghuchi’s Design Of Experiments’, International Journal of Mechanical and Production Engineering

(IJMPE), Volume-3,Issue-5 (May, 2015), Online ISSN 2321-2071, Print ISSN 2320-2092.

National: ---

Papers Presented in Conferences: International: --- “Contribution of DOE in the field of Turning process optimization”, in the international conference on Eco-Friendly Technologies for Sustainable Growth (ICEFT-14) National: ---







Awards : --

Grants fetched : --

Interaction with Professional : --

Institutions

Name of Teaching Staff

: Prof. Saurabh Vichare


Date of Joining the Institution : 08.07.2014 Qualifications with Class / Grade : M.E. Mechanical Engg, DJSCE, Mumbai University,

8.91 CGPI, 2016. B.E. Mechanical Engg, RGIT, Mumbai University, 67%

May 2011.

Total Experience in Years : Teaching: Assistant Professor in D.J. Sanghvi College of Engg. from

08-07-2014 to till date. Industry: 1.5 year as Reliability Engineer at ACG Pam Pharma

Technologies PVT Ltd.

Research :

Papers Published:

International: --- National: --- Papers Presented in

Conferences: International: --- Article on Lean Manufacturing: A step Towards

Green Future in International Conference of Eco

Friendly Technology For Sustainable Growth National: ---







Awards : --

Grants fetched : --



Name of Teaching Staff : Prof Aditya M. Jawlekar Designation : Assistant Professor



Qualifications with Class / Grade : M.E. Mechanical Engg, Mumbai University, 8.53 CGPI 2016

B.E. Mechanical Engg., Mumbai University, 70% May 2012


Assistant Professor in D.J. Sanghvi College of Engg. from 08-07-2014 till date.

Industry:

Worked as a Production Engineer in Gearbox company for period of one year.

Papers Published:



International – An Overview of Total Productive Maintenance & Overall Equipment Efficiency,in International Conference of Eco Friendly Technology for Sustainable Growth National: ---







Awards : --

Grants fetched : --



Name of Teaching Staff : Prof. Dharam V. Ranka



Qualifications with Class / Grade : M.E. Mechanical Engg, DJSCE, Mumbai University,

9.01 CGPI, 2016. B.E. Automobile Engg, MHSSCE, Mumbai University, 72%, May 2011.


Assistant Professor in D.J. Sanghvi College of Engg. from 08-07-2014 to till date. Industry: 1 year as Technical Advisor, NMPL

Research :

Papers Published:

International: --- 1. Suspecting Dominant Variable That Causes Porosity Defect in a Cast Made up of Aluminium Alloy (LM2) Using Shainin’s DoE Approach, International Journal of Advances in Mechanical and Civil Engineering, Volume-3, Issue-5, Oct, 2016, ISSN: 2394-2827. (with Khavekar Rajendra and Dr. Hari Vasudevan)

2. Optimization Of Turning Process Parameters In The Machining Of An Accumulator

(mdn-250) Using Taghuchi’s Design Of Experiments, International Journal of

Mechanical And Production Engineering, Volume- 3, Issue-5, May-2015, ISSN: 2320-

2092. (with Dr. Hari Vasudevan and Prof. Shreya Kadwadkar)

National: ---

Papers Presented in

Conferences: International: --- 1. Suspecting Dominant Variable That Causes Porosity Defect in a Cast Made up of

Aluminium Alloy (LM2) Using Shainin’s DoE Approach, International Journal of Advances in Mechanical and Civil Engineering, Volume-3, Issue-5, Oct, 2016, ISSN: 2394-2827. (with Prof. Khavekar Rajendra and Dr. Hari Vasudevan)

2. Optimization Of Turning Process Parameters In The Machining Of An Accumulator

(mdn-250) Using Taghuchi’s Design Of Experiments, International Journal of Mechanical And Production Engineering, Volume- 3, Issue-5, May-2015, ISSN: 2320-

2092. (with Dr. Hari Vasudevan and Prof. (Mrs.) Shreya Kadwadkar)

National: ---






Awards : --

Grants fetched : --



name of teaching staff : dr. k.n. vijaya kumar

Documents