mwf & lube brochure
TRANSCRIPT
Tradename Primary Description CAS # Use/Benefit Base
Flu
id
Lubr
icity
Ant
iwea
r Add
itive
Emul
sifie
r
Chem
ical
Inte
rmed
iate
Form
@ 2
5°C
Solu
bilit
y in
Wat
er1
HLB
Clou
d Pt
., °C
(1%
aq.
)
Pour
Pt.
, °C
ERUCICAL H-102 High erucic acid rapeseed (HEAR) oil
8002-13-9 Higher molecular weight vegetable oil that offers improved lubricity compared to other vegetable oils.
• • •Yellow liquid
I -12
ERUCICAL H-107 Erucic acid 68002-87-9 Higher molecular weight fatty acid that compatibilizes formulations and adds lubricity.
• • Yellow liquid
I 11
LAMCHEM PE-108 K Phosphated mono- and diglycerides
Proprietary Food grade phosphorous-based AW/EP additive that imparts lubricity without leaving tacky, discolored residue.
•Opaque liquid
D 5-7
LAMCHEM PE-130 K Phosphated mono- and diglycerides
455943-22-3 Food grade, phosphorous-based EP additive that imparts lubricity without leaving tacky, discolored residue. NSF HX-1 Reg. #128723.
•Opaque liquid
I 3.0 -8
LUBEADD 1307 Amine phosphate Proprietary Low acid value antiwear additive.•
Amber liquid
I
LUMISORB SMO I Sorbitan monooelate 1338-43-8 Oil soluble emulsifier that provides lubricity and rust protection.• •
Amber liquid
I 4.3 -22
LUMULSE 1061-L EO/PO block copolymer 9003-11-6 Low HLB, low foaming w/o emulsifier used in cutting fluids, rinse aids and metal cleaning.
• • •Clear liquid
S 3.0 24 -30
LUMULSE 1062-L EO/PO block copolymer 9003-11-6 Low HLB, low foaming w/o emulsifier used in cutting fluids, rinse aids and metal cleaning.
• • •Clear liquid
S 7.0 32 -4
LUMULSE 2017-R EO/PO reverse block copolymer
9003-11-6 High cloud point, low foaming w/o emulsifier used as lubricity additive in machining applications.
• • •Clear liquid
S 8.0 35 -25
LUMULSE 2025-R EO/PO reverse block copolymer
9003-11-6 High cloud point, low foaming w/o emulsifier used as lubricity additive in machining applications.
• • •Clear liquid
S 6.3 29 -5
LUMULSE 4017-R EO/PO reverse block copolymer
9003-11-6 High cloud point, low foaming w/o emulsifier used as lubricity additive in machining applications.
• • •Clear liquid
S 7-12 46 10
LUMULSE 10101-L EO/PO block copolymer 9003-11-6 Low HLB, low foaming w/o emulsifier used in cutting fluids, rinse aids and metal cleaning.
• • •Clear liquid
I 4 15 -23
LUMULSE 40-L PEG 400 monolaurate 9004-81-3 Secondary emulsifier that provides emulsion stability.• •
Yellow liquid
S 12.8 32 12
LUMULSE 42- LV PEG 400 dilaurate 9005-02-01 Secondary emulsifier that provides emulsion stability.• •
Yellow liquid
D 9.7 29 18
LUMULSE 40-L V PEG 400 monolaurate 9004-81-3 Secondary emulsifier that provides emulsion stability.• •
Yellow liquid
D 12.8 68 12
LUMULSE 40-O I PEG 400 monooleate 9004-96-0 Secondary emulsifier that provides emulsion stability.• •
Yellow liquid
D 11.8 65 5
LUMULSE 40-O K PEG 400 monooleate 9004-96-0 Secondary emulsifier that provides emulsion stability.• •
Yellow liquid
D 11.8 5
LUMULSE CO-25 POE (25) castor oil 61791-12-6 Water-soluble emulsifier used in wide pH ranges to stabilize emulsions.
• •Yellow liquid
S 10.8 5
LUMULSE CO-40 POE (40) castor oil 61791-12-6 Water-soluble emulsifier used in wide pH ranges to stabilize emulsions.
• •Yellow liquid
S 13.0 82 14
LUMULSE CO-5 POE (5) castor oil 61791-12-6 Oil-soluble emulsifier used in wide pH ranges to stabilize emulsions.• •
Yellow liquid
I 4.0 -26
LUMULSE EST-300 High erucic acid rapeseed alkoxylate
253685-23-3 Low foaming, low misting, high HLB emulsifier that adds lubricity to ferrous and non-ferrous MWF formulations.
• •Yellow liquid
S 16.0 85 -5
LUMULSE EST-430 MPEG laurate 9006-27-3 Thermally stable monoester that acts as a secondary emulsifier and provides emulsion stability.
• •Yellow liquid
S 9.2
LUMULSE EST-500 LF Alkoxylated linear alcohol Proprietary Low foaming, low cloud point surfactant which offers excellent detergency, wetting and emulsification.
•Clear liquid
D 10.0 12 -9
LUMULSE EST-520 Alkoxylated lauryl alcohol 68238-81-3 Low foaming surfactant which offers excellent detergency, wetting and emulsification.
• •Clear liquid
D
LUMULSE EST-610 EO/PO block copolymer dioleate
67167-17-3 Low foaming surfactant that offers excellent lubrication on all metals while coupling formulations together.
• •Yellow liquid
D 5.0
LUMULSE GML K Glycerol monolaurate 61789-05-7 Oil-soluble emulsifier that provides lubricity and rust protection.• •
Yellow solid
I 5.2 26
Lubricants & Metalworking Fluid Additives
1 Solubility in Water: I = Insoluble S = Soluble D = Dispersible. * Cloud points were run on products “as-is”.
Typical properTies
Tradename Primary Description CAS # Use/Benefit Base
Flu
id
Lubr
icity
Ant
iwea
r Add
itive
Emul
sifie
r
Chem
ical
Inte
rmed
iate
Form
@ 2
5°C
Solu
bilit
y in
Wat
er1
HLB
Clou
d Pt
., °C
(1%
aq.
)
Pour
Pt.
, °C
LUMULSE GMO K Glycerol monooleate
37220-82-9 Oil-soluble emulsifier that provides lubricity and rust protection.• •
Yellow liquid
I 2.8 8
LUMULSE GMR K Glycerol monoricinoleate
1323-38-2 Oil-soluble emulsifier that provides lubricity and rust protection.• •
Viscous liquid
I 2.6 -21
LUMULSE GMT K Glycerol monotallate 61789-12-6 Oil-soluble emulsifier that provides lubricity and rust protection.• •
Amber liquid
I 2.8 -18
LUMULSE GMT-40 Glycerol monotallate 61789-12-6 Oil-soluble emulsifier that provides lubricity and rust protection.• •
Amber liquid
I 2.8 -18
LUMULSE HCO-16T POE (16) hydrogenated castor oil
61788-85-0 Water-soluble emulsifier used in wide pH ranges to stabilize emulsions. • •
Yellow liquid
S 9.1
LUMULSE HCO-25 POE (25) hydrogenated castor oil
61788-85-0 Water-soluble emulsifier used in wide pH ranges to stabilize emulsions. • •
Yellow liquid
S 10.8 88 5
LUMULSE HCO-40 POE (40) hydrogenated castor oil
61788-85-0 Water-soluble emulsifier used in wide pH ranges to stabilize emulsions. • •
Yellow liquid
S 14.0 100
LUMULSE MPEG 350 Polyethylene glycol 350 methyl ether
9004-74-4 Low toxicity, water soluble and non-staining lubricant that can be used as an intermediate. • •
Clear liquid
S 19.3 3
LUMULSE MPEG 550 Polyethylene glycol 550 methyl ether
9004-74-4 Low toxicity, water soluble and non-staining lubricant that can be used as an intermediate. • •
Clear liquid
S 19.5 20
LUMULSE PEG 200 Polyethylene glycol 200 25322-68-3 Low toxicity, water soluble and non-staining lubricant that can be used as an intermediate. • •
Clear liquid
S 20.0
LUMULSE PEG 300 Polyethylene glycol 300 25322-68-3 Low toxicity, water soluble and non-staining lubricant that can be used as an intermediate. • •
Clear liquid
S 20.0 -11
LUMULSE PEG 400 Polyethylene glycol 400 25322-68-3 Low toxicity, water soluble and non-staining lubricant that can be used as an intermediate. • •
Clear liquid
S 20.0 6
LUMULSE PEG 600 Polyethylene glycol 600 25322-68-3 Low toxicity, water soluble and non-staining lubricant that can be used as an intermediate. • •
Clear liquid
S 20.0 20
OLEOCAL C-102 Canola oil 8002-13-9 Food grade, environmentally friendly base oil and lubricity additive for applications where the lubricant is used repeatedly for long periods of time. NSF HX-1 Reg. #128724.
• • •Yellow liquid
I -18
OLEOCAL C-104 High oleic canola oil 120962-03-0 75% oleic vegetable oil for applications where low pour point and high oxidative stability are necessary.
• • •Yellow liquid
I -15
OLEOCAL IVO-114 K Soybean oil 8001-22-7 Environmentally friendly base oil and lubricity additive for applications where the lubricant is not used repeatedly.
• • •Yellow liquid
I -7
OLEOCAL ME-112 Methyl canolate 67762-38-3 Low viscosity lubricity additive and chemical intermediate. Base fluid in environmentally friendly solvents and cleaning products.
• •Yellow liquid
I -5* -15
OLEOCAL ME-130 Methyl soyate 67784-80-9 Low viscosity lubricity additive and chemical intermediate. Base fluid in environmentally friendly solvents and cleaning products.
• •Yellow liquid
I -2* -6
OLEOCAL ME-70 V Methyl oleate 67762-26-9 Low viscosity lubricity additive and chemical intermediate.• •
Yellow liquid
I 11* 7
POLYCAL 1265 Proprietary ester blend Proprietary Food grade, high temperature stability and non-staining to alumi-num during machining operations. NSF HX-1 Reg. #136557.
• •Clear liquid
I 5
POLYCAL PGI-285 Polyalkylene glycol, water insoluble
9003-13-8 Base fluid for high performance lubricants.•
Clear liquid
I
POLYCAL PGS-260 Polyalkylene glycol, water soluble
9038-95-3 Base fluid for high performance lubricants.•
Clear liquid
S
POLYCAL PGS-660 Polyalkylene glycol, water soluble
9038-95-3 Base fluid for high performance lubricants.•
Clear liquid
S
POLYCAL PGS-5100 Polyalkylene glycol, water soluble
9038-95-3 Base fluid for high performance lubricants.•
Clear liquid
S
POLYCAL TMP 18-1 TMP trioleate 68002-79-9 Environmentally friendly base oil and lubricity additive for applica-tions where the lubricant is used repeatedly for long periods of time.
• •Amber liquid
I -42
Lubricants & Metalworking Fluid AdditivesTypical properTies