To Record Video: 1. Plug in charger to USB port on back of clock to charge battery or leave charger plugged in to use

outlet power. 2. Turn on clock with on/off switch on back of unit. 3. Press the two “VOL” buttons simultaneously on top of clock and hold down for 3 seconds. A

menu icon named “DV” should appear on the screen. If the “DV” icon does not appear, press the two “VOL” buttons simultaneously again until the “DV” icon appears on the screen.

4. With the “DV” icon on the screen, press the “OK” button on top of the clock to start the

recording mode. An image of what is being recorded will show up on the clock’s screen with a message stating that recording will start in 10 seconds.

5. Place the clock in a desired location to monitor activity. The screen will automatically return to

display a standard digital clock on the screen but will continue to record covertly. A blue dot on the upper right section of the clock screen indicates that record mode is set.

Blue dot indicates record mode. To stop recording press the “ESC” button

on top of clock twice. To start recording mode again return to

the “DV” mode by repeating steps 3 through 5.

To View Recordings: 1) Press any of the top buttons to enter the menu mode. 6 menu icons will appear on the bottom

of the screen.

2) Press any of the “VOL” buttons on top of the clock to cycle through the 6 menu icons. Stop at

the menu icon called “Video Player”

3) Press the “OK” button on top of the clock. A video player icon folder should appear on the left

side of the screen.

4) Press and hold down the two “VOL” buttons simultaneously on top of the clock for 3 seconds. Recorded files will show up on the clock screen on the right side. Use the “VOL” buttons to cycle through the files shown on the right side of the screen to select a desired file to view.

5) Press the “OK” button on top of the clock to start playback of desired file. Use the “VOL” button on top of the clock to cycle through playback files. Press the “ESC” to return to the previous section or press the “ESC” twice to exit.