muscle™ compressor coalescer separates oil from air compressor … · 2012-06-28 · oil/water...

1
S P E C I F I C A T I O N S S P E C I F I C A T I O N S How It Works A. Condensate is injected B. Compressor discharge flows through diffusing chamber C. De-watered air automatically exits via vent D. Water and oils collect E. De-oiled water forced down and through media to remove trace oils, then through tube to exit F. De-oiled water automatic discharge G. Oil floats to surface H. Manual oil discharge Dimensions/Capacity Model Number: Tank Material: Tank Capacity: Tank Height: Tank Diameter: Tank Weight: Tank Fittings: Temperature: Inlet Connection, max.: Inlet Pressure, max.: Condensate, per release, max.: Release Interval, min.: Oil Volume Capacity, max.: Outlet Connection: Hoses: Air Vent: Water Release: Oil Drain: Drum Dolly: Dual Units: F15AC Polyethylene 8 gallons (30 liters) 20” (51cm) 17” (43cm) 20 lbs. (9kg) Spin-welded 41-95°F (5-35°C) 1/2” (12.7mm) 150 psi (10.3 barg) 1 gallon (3.78 liters) 5 minutes 0.75 gallons (2.84 liters) 1/2” (12.7mm) Not included Automatic Automatic Manual #FXDD15, Sold separately Available with manifold when condensate output greater than capacity of one unit Important Note This system utilizes the method of gravity separation to separate oil from water. In some cases where there are specialized detergents in a compressor lubricant, a stable oil/water emulsion may remain, and will appear more milky in nature. These emulsions are generally safe to dispose of, however, each municipality will have their own limit based upon oil contaminant content, volumes generated, and their ability to treat it. Please contact Zebra for more information regarding these emulsions. You may also check with your local municipality to determine contaminant levels and volumes allowed for direct release. In most areas, free testing services are available to determine possible contaminant levels and if they are safe to dispose of without further treatment. A B C D E G F Zebra Industrial & Environmental Division of Zebra Skimmers Corp. PO Box 833 Chagrin Falls, OH 44022 USA ©January 2010 Zebra Skimmers Corp. All rights reserved. Information subject to change without notice. Phone: 1-440-349-0141 Toll Free: 1-888-249-4855 Fax: 1-440-349-1211 www.Zebra-US.com H Will it Work for You? Contact Zebra today to determine if this system will meet your needs, providing effective treatment to dispense direct to the drain! Please provide us the following information: 1. Who is the compressor manufacturer and/or model number? 2. What is the HP or cfm of your compressor? 3. What is the average room temperature in the location of the compressor? 4. What is the average relative humidity in that location? 5. How many hours per day does it operate? 6. What is the appearance of the separated water portion (clear or more milky in nature?) Specifications 1- Condensate Inlet 2- Clean Water Discharge 3- Waste Oil Discharge 4- Coalescing Media Muscle™ Compressor Coalescer Separates Oil from Muscle™ Compressor Coalescer Separates Oil from Air Compressor Condensate Air Compressor Condensate

Upload: others

Post on 29-Mar-2020

9 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Muscle™ Compressor Coalescer Separates Oil from Air Compressor … · 2012-06-28 · oil/water emulsion may remain, and will appear more milky in nature. These emulsions are generally

S P E C I F I C A T I O N SS P E C I F I C A T I O N S

How It Works

A. Condensate is injectedB. Compressor discharge flows through diffusing chamberC. De-watered air automatically exits via ventD. Water and oils collectE. De-oiled water forced down and through media to remove trace oils, then through tube to exitF. De-oiled water automatic dischargeG. Oil floats to surfaceH. Manual oil discharge

Dimensions/Capacity

Model Number:Tank Material:

Tank Capacity:Tank Height:

Tank Diameter:Tank Weight:Tank Fittings:Temperature:

Inlet Connection, max.:Inlet Pressure, max.:

Condensate, per release, max.:Release Interval, min.:

Oil Volume Capacity, max.:Outlet Connection:

Hoses:Air Vent:

Water Release:Oil Drain:

Drum Dolly:Dual Units:

F15ACPolyethylene8 gallons (30 liters)20” (51cm)17” (43cm)20 lbs. (9kg)Spin-welded41-95°F (5-35°C)1/2” (12.7mm)150 psi (10.3 barg)1 gallon (3.78 liters)5 minutes0.75 gallons (2.84 liters)1/2” (12.7mm)Not includedAutomaticAutomaticManual#FXDD15, Sold separatelyAvailable with manifold whencondensate output greater thancapacity of one unit

Important Note

This system utilizes the method of gravity separation to separate oil from water. In some cases where there are specialized detergents in a compressor lubricant, a stable oil/water emulsion may remain, and will appear more milky in nature. These emulsions are generally safe to dispose of, however, each municipality will have their own limit

based upon oil contaminant content, volumes generated, and their ability to treat it.

Please contact Zebra for more information regarding these emulsions. You may also check with your local municipality to determine contaminant levels and volumes allowed for direct release. In most areas, free testing services are available to determine possible contaminant levels and if they are safe to dispose of without further treatment.

AA

BB

CC

DD

EE

GG

FF

Zebra Industrial & EnvironmentalDivision of Zebra Skimmers Corp.PO Box 833 Chagrin Falls, OH 44022 USA©January 2010 Zebra Skimmers Corp. All rights reserved.Information subject to change without notice.

Phone: 1-440-349-0141Toll Free: 1-888-249-4855

Fax: 1-440-349-1211www.Zebra-US.com

HH

Will it Work for You?Contact Zebra today to determine if this system will meet your needs, providing effective treatment to dispense direct to the drain! Please provide us the following information:

1. Who is the compressor manufacturer and/or model number?2. What is the HP or cfm of your compressor?3. What is the average room temperature in the location of the compressor?4. What is the average relative humidity in that location?5. How many hours per day does it operate?6. What is the appearance of the separated water portion (clear or more milky in nature?)

Specifications

1- Condensate Inlet2- Clean Water Discharge3- Waste Oil Discharge4- Coalescing Media

Muscle™ Compressor Coalescer Separates Oil fromMuscle™ Compressor Coalescer Separates Oil fromAir Compressor CondensateAir Compressor Condensate