multipurpose machine for inset and offset applications ... · (dbi) and electric vibrator drive. 2...

Multipurpose machine for inset and offset applications.

Slipform PaversSP 64 | SP 64 i

7 |

11 |12 |

At a glance: outstanding features of the new SP 64 / SP 64 i

Highlights in engine technology and operation (pages 6 /7)

5 | EFFICIENT ENGINE MANAGEMENT

The ECO MODE feature automatically adjusts the engine output to the current performance requirements, thus ensuring reduced diesel consumption and low noise emission levels.

6 | STATE-OF-THE-ART ENGINE TECHNOLOGY

The SP 64 features state-of-the-art, high-performance engine technology (155 kW / 208 HP / 211 PS) complying with exhaust emission standards EU Stage 3a / US Tier 3.The SP 64 i features state-of-the-art, high-performance en-gine technology (180 kW / 241 HP / 245 PS) complying with exhaust emission standards EU Stage 4 / US Tier 4f.

7 | PERFECT ERGONOMIC DESIGN AND HANDLING

Relaxed working is ensured by the ergonomically designed workplace offering a user-friendly operating concept and perfect visibility.

Highlights in concrete paving (pages 4 / 5)

1 | EXCEPTIONAL FLEXIBILITY IN CONCRETE PAVING

The slipform paver achieves perfection in the highly pre-cise paving of standard concrete slabs at widths ranging from 2.00 m to 7.50 m and layer thicknesses of up to 450 mm. Paving widths of up to 6.00 m can be realized with paver configurations including dowel bar inserter (DBI) and electric vibrator drive.

2 | TRIED-AND-TESTED SLAB PAVING MOULD

Metric inset slab paving moulds of the 910 m or 910 wm series are on offer. The 910 wm series is equipped with a wearing pan in standard design and central crown as an optional feature.

3 | MACHINE-INTEGRATED INSERTION OF STEEL REINFORCEMENT

A self-loading dowel bar inserter, central tie bar inserter(s) and side tie bar inserter(s) are available as optional fea-tures in accordance with customer requirements.

4 | OPTIONS IN CONCRETE COMPACTION

Depending on customer requirements, the paver can be equipped with a hydraulic or electric vibrator drive. In standard design, it comes with 12 hydraulic connectors (optionally 18) but can optionally be fitted with 18 or 24 electric connectors.

02 03

1 |

2 |

3 |

4 |

5 |

6 |

9 |

10 |

8 |

Highlights in machine control (pages 8 / 9)

8 | HIGHLY PRECISE STEERING AND DRIVE SYSTEMS

Intelligent steering and control systems for exceedingly quiet operation even in narrow bends guarantee precision in concrete paving.

9 | MACHINE CONTROL SYSTEMS FEATUR-ING ADVANCED INTELLIGENCE

The standardized interface for quick, targeted service diag-nostics and the state-of-the-art WITOS® telematics system increase efficiency in everyday operation.

10 | FIELD-PROVEN 3D INTERFACE

The optional interface guarantees tested compatibility with the 3D control systems of leading suppliers.

Highlights in modular design (pages 10 / 11)

11 | FULLY MODULAR MACHINE DESIGN

The paver’s fully modular design is synonymous with flexi-ble modification, easy retrofitting of customer options and application-specific adjustment to site conditions. It is even possible to convert the paver to the offset configuration of the SP 61 / SP 61 i.

12 | INTELLIGENT TRANSPORT CONCEPT

Compact dimensions and minimum modification require-ments ensure ease of loading and cost-effective transport. The paver’s hydraulically operated pivoting legs are a major contributor to reducing the effort required for machine setup on site.

> FOUR-TRACKED PAVER WITH A TREMENDOUS RANGE OF APPLICATIONS

> INSERTION OF DOWEL BARS AND TIE BARS AT AN INSET WORKING WIDTH OF UP TO 6 M

> FOR HIGHEST QUALITY STANDARDS IN SURFACE EVENNESS

> MODULAR DESIGN ENABLES MODIFICATION TO OFFSET CONFIGURATION

Highlights in concrete paving

CONCRETE SLABS WITH CENTRAL CROWN

Concrete slabs can be produced with a central crown of up to 3%.

SUPER SMOOTHERThe oscillating super smoother manufactured from high-quality material ensures a perfect surface finish.

OSCILLATING BEAMThe eccentrically driven

heavy-duty oscillating beam with automatic lifting feature

in case of machine stoppages removes any irregularities in

the concrete surface.

METRIC SLAB PAVING MOULDSConcrete of stiff consistency can be paved to precision using metric inset slab paving moulds of the 910 m or 910 wm series including wearing pan.

SPREADING PLOUGH OR SPREADING AUGERA spreading plough or spreading auger ensures even distribution of the concrete deposited in front of the paving mould.

04 05

HYDRAULIC VIBRATORSThe standard vibrating equipment comprises 12 hydraulic connectors (optionally 18) for hydraulic vibrator drive.

ELECTRIC VIBRATORSDepending on customer requirements, 18 electric connectors (optionally 24) can be installed for electric vibrator drive.

DOWEL BAR INSERTERThe extending dowel bar inserter (DBI) – with optional self-loading feature – integrated in the machine frame inserts the dowel bars in the correct position to prevent uncontrolled cracking of the concrete slab.

SEPARATE HYDRAULIC SIDE TIE BAR INSERTERSThe side tie bar inserters can be mounted on the left, on the right, or on both sides of the machine.

AUTOMATIC LONGITUDINAL JOINT TIE BAR INSERTER Longitudinal joint tie bars are inserted in an automated process to prevent concrete slabs from drifting apart.

CONCRETE SLABS FROM 2.00 M TO 7.50 M

IN WIDTHHigh-precision, high-quali-ty paving of concrete slabs

at widths ranging from 2.00 m to 7.50 m – up to 6.00 m including dowel

bar inserter and electrically driven vibrators.

LAYER THICKNESS OF UP TO 450 MMPaving at layer thicknesses of up to 450 mm – higher thicknesses can be realized on request.

Integrated dowel bar inserter.

Longitudinal joint tie bar inserter. Separate side tie bar inserter.

Highlights in engine technology and operation

ERGONOMIC DESIGNThe ergonomically de-signed operator’s platform improves operator perfor-mance, therefore increas-ing the productivity of the overall machine.

PERFORMANCE-OPTIMIZED ECO MODE ENGINE MANAGEMENT

Automatic adjustment of the engine output to performance requirements ensures high-est engine efficiency, fuel economy and low

noise emission levels.

06 07

ENGINE TECHNOLOGY FOR EU STAGE 3A / US TIER 3The high-powered diesel engine installed in the SP 64 complies with exhaust emission standards EU Stage 3a / US Tier 3.

ENGINE TECHNOLOGY FOR EU STAGE 4 / US TIER 4FThe high-powered diesel engine installed in the SP 64 i complies with the stringent requirements of the currently highest exhaust emission standards EU Stage 4 / US Tier 4f.

HIGH ENGINE POWERThe high-powered engine ensures efficient concrete paving in the optimum performance and torque ranges.

PERFECT VISIBILITYThe spacious operator’s platform provides a perfect view of the paving process.

OPTIONAL FOLD-DOWN CANOPYThe fold-down canopy allows operation to continue regardless of weather conditions.

EASE OF MAINTENANCEReady access to the check points and points of maintenance minimizes maintenance requirements.

STATE-OF-THE-ART CONTROL PANELThe control panel features a state-of-the-art screen and clear, language- neutral symbols to promote productive working.

STANDARDIZED OPERATING CONCEPT

The standardized, self- explanatory operating con-cept in line with the various

new SP model ranges offers additional synergistic effects.

Ergonomically optimized, clearly structured operating concept.

HIGH-QUALITY MACHINE MANAGEMENT SYSTEM

The high-quality machine management system has a large proportion of soft-

ware developed in-house and increases both safety in operation and the range of

applications of the slipform paver.

Highlights in machine control

HIGHLY PRECISE DRIVE MOTOR CONTROL

The highly precise drive motor control prevents

jerky driving even when working at minimum

speed.

08 09

SPEED ADJUSTMENTComputer-controlled speed adjustment of the individual track units enables specifica-tions to be adhered to with pinpoint precision even when paving in bends.

SERVICE DIAGNOSTICS SYSTEMWIDIAG, the service diagnostics system with standardized interface, is used by WIRTGEN service engineers for quick, targeted service diagnostics right on site.

UPGRADABLE CAN-BUS SYSTEMThe existing CAN-bus system can be upgraded.

EFFICIENT WITOS® TELEMATICS SYSTEMThe WIRTGEN WITOS® FleetView telematics system supports fleet manage-ment, machine position and status monitoring, as well as maintenance and diagnostic procedures.

SECOND-TO-NONE SLOPE CONTROL FEATUREThe innovative electronic slope control developed by WIRTGEN results in significantly shorter machine response times which are reflected in perfect paving results.

OPTIONAL INTERFACE FOR 3D CONTROL SYSTEMSThe optional interface creates ideal conditions for the use of state-of-the-art 3D systems in concrete paving. Thorough acceptance procedures verifying the compatibility with 3D control systems of leading suppliers ensure safety of use.

FOUR STEERING MODESFour different steering modes – Back-straight, Crab, Coordinated, Rotate – allow effortless turning and manoeuvring. In addition, the four steering modes facilitate handling of the machine on site.

Different steering modes demonstrated by the SP 64 / SP 64 i.

ADJUSTMENT OF STEERING ANGLE POSITION

With the SP 64 / SP 64 i, the steering angle positions of the

four track units are adjusted fully automatically to optimize

driving behaviour and thus pre-cision in concrete paving.

BACK-STRAIGHT CRAB

COORDINATED ROTATE

Highlights in modular design

TELESCOPING MACHINE FRAMEThe machine frame can be telescoped in

longitudinal and transverse direction to allow full adjustment to site conditions.

RETROFITTING MADE EASYStandard interfaces enable

easy retrofitting of individual customer-specific options.

FULLY MODULAR MACHINE DESIGNThe paver’s fully modular design enables a

wide variety of inset paving applications.

10 11

SELF-LOADING DOWEL BAR INSERTERThe innovative self-loading feature enables machine transport and setup on the construction site without the need for expensive loading cranes.

EASE OF MODIFICATIONEasy modification and

addition of complementary features cater to complex

customer-specific applications.

GETTING READY FOR TRANSPORT QUICKLYThe four pivoting legs (optionally hydraulic) permit not only rapid switching from transport to operating mode but also maximum flexibility for setup of the machine on site.

COMPACT DESIGNExcellent mobility and the paver’s compact design ensure effortless turning and manoeuvring.

ADAPTABILITY TO SITE CONDITIONSThe machine has been engineered to ensure reliable adaptability to site conditions, thus increasing both productivity and the range of applications.

TWO INSET MACHINE MODELSThe four-tracked SP 64 / SP 64 i slipform paver is optionally available as a two-tracked model, the SP 62 / SP 62 i.

Self-loading dowel bar inserter.

PIVOTING TRACK UNITS Track units with large piv-oting angles ensure full ad-justment to site conditions.

12 13

SP 64 SP 64 i

Range of applications

Slab paving applicationPaving width: 2.00 to 7.50 m *1

Layer thickness: up to 450 mm *2

Concrete spreading

Spreading augerSingle-piece auger, modular extension to up to 6.00 m /

Two-piece auger, modular extension to up to 7.50 m

Spreading plough Modular extension to up to 7.50 m

Slab paving equipment

Slab paving mould type 910 m (excluding wearing pan, excluding crown function)

Modular extension to up to 7.50 m

Slab paving mould type 910 wm (including wearing pan, including or excluding crown function)

Modular extension to up to 7.50 m

Dowel bar inserter (DBI) Modular extension to up to 6.00 m

Oscillating beam Modular extension to up to 7.50 m

Super smoother Modular extension to up to 7.50 m

Longitudinal joint tie bar inserter 1

Side tie bar inserter (hydraulic) Right and / or left

Vibrators and circuits

Hydraulic vibration 12 connectors (optional: 18 connectors)

Electric vibration 18 connectors (optional: 24 connectors)

Hydraulically driven vibrators Curved (D66)

Electrically driven vibrators Curved (D76)

Engine

Engine manufacturer Deutz Deutz

Type TCD 2012 L06 2V TCD 6.1 L6

Cooling Water Water

Number of cylinders 6 6

Rated power at 2,300 rpm 155 kW / 208 HP / 211 PS 180 kW / 241 HP / 245 PS

Displacement 6,057 cm3 6,057 cm3

Fuel consumption, full load 42 l / h 46 l / h

Fuel consumption, 2/3 load 17 l / h 18 l / h

Exhaust emission standards EU Stage 3a / US Tier 3 EU Stage 4 / US Tier 4f

Electrical system

Voltage supply 24 V DC

Electric vibration 110V AC 3~ / 200 Hz

Technical specification

*1 = Please note that not all machine configurations are available for the entire working width range; configurations including DBI are available for working widths of up to 6.00 m only; configurations including central crown are available for working widths of 3.50 m or larger only

*2 = Please consult factory for special paving widths, layer thicknesses and optional equipment features*3 = Values within standard transport height; please consult factory for special dimensions*4 = Weights depend on the machine’s range of equipment and paving width

SP 64 SP 64 i

Tank capacities

Fuel tank 400 l 400 l

Adblue® / DEF tank – 32 l

Hydraulic fluid tank, electric vibration 200 l 200 l

Hydraulic fluid tank, hydraulic vibration 400 l 400 l

Water tank 500 l + 500 l 500 l + 500 l

Driving performance

Paving speed B0: 0 to 6 m / min; B1: 0 to 7 m / min

Travel speed B0: 0 to 21 m / min; B1: 0 to 23.50 m / min

Track units

Number 4

Type B0: dimensions (L x W x H) 1,590 x 300 x 570 mm

Type B1: dimensions (L x W x H) 2,040 x 305 x 580 mm

Height adjustment

Hydraulic 1,100 mm / 1,000 mm

Mechanical 420 mm

Central crown

Variable adjustment range For paving widths of 3.50 m to 7.50 m: max. 3 % *3

Transport dimensions (L x W x H)

Paving width 3.50 m: Machine including slab paving mould type 910 m / 910 wm, including spreading plough, oscillating beam and super smoother (excluding guide bar for super smoother)

9,000 x 3,000 x 3,100 mm

Paving width 6.00 m: Machine including slab paving mould type 910 m / 910 wm, including spreading plough, oscillating beam and super smoother (excluding guide bar for super smoother)

11,500 x 3,000 x 3,100 mm

Machine weights

Operating weight, CE (including slab paving mould type 910 m), 3.50 m 19,000 kg *4

Machine weight 17,000 to 45,000 kg *4

14 15

Dimensions

Working direction

Paving situation: slipform paver SP 64 / SP 64 i equipped with spreading auger or spreading plough, slab paving mould type 910 m / 910 wm, oscillating beam and super smoother

B0: 1,590 B1: 2,040

B0: 1,590 B1: 2,040

8,450 (excluding longitudinal joint tie bar inserter) *1

9,150 (including longitudinal joint tie bar inserter) *1

Laye

r th

ickn

ess

+ 4

,100

Laye

r th

ickn

ess

+ 3

,100

1,00

0

B0:

570

B1:

580

B0:

570

B1:

580

Pavi

ng w

idth

+ 4

50

Pavi

ng w

idth

Dimensions in mm*1 = Longitudinal joint tie bar inserter (pivotable) and side tie bar inserter not shown

Working direction

Paving situation: slipform paver SP 64 / SP 64 i equipped with spreading auger or spreading plough, slab paving mould type 910 m / 910 wm, dowel bar inserter (DBI), oscillating beam and super smoother

B0: 1,590 B1: 2,040

B0: 1,590 B1: 2,040

Laye

r th

ickn

ess

+ 4

,100

Laye

r th

ickn

ess

+ 3

,100

1,00

0

B0:

570

B1:

580

B0:

570

B1:

580

Pavi

ng w

idth

+ 4

50

Pavi

ng w

idth

10,500 *2

Dimensions in mm*2 = Applies to standard longitudinal joint tie bar inserter (non-pivotable)

16 17

= Standard equipment = Standard equipment, replaceable with optional equipment = Optional equipment

Standard equipment features

SP 64 SP 64 i

Basic machine

Basic machine comprising engine station and chassis, telescoping to the left and right mechanically for the installation of slab paving moulds between the track units and including pre-fitting for four track units

Fuel tank, 400 litres

Electrical system (24 V)

Cooling system with temperature-controlled fan speed

Hydraulic system including an adequately sized hydraulic fluid tank and a pump transfer gearbox with two output shafts and the pumps required for the machine’s basic equipment package

Main frame and height adjustment

Hard-wearing steel frame which can be telescoped, in increments, by 750 mm to either side and optionally extended using fixed extension elements

The chassis is pre-fitted with multiple attachment points for the modular addition of a variety of equipment features

Concrete paving equipment ranging from 2.00 m to 4.00 m in width can be connected to the machine frame; optional extension to working widths of up to 7.50 m (depending on the machine’s range of equipment; up to 6.00 m with DBI)

Chassis elements for mechanical telescoping in increments to achieve working widths of up to 4.00 m

Track system and connection of track units

Paving speed of B0 track unit: 0 to 6 m / min

Transport speed of B0 track unit: 0 to 21 m / min

Cylinder steering system for model with four B0 track units

Model with four B0 track units (four rollers), fitted with triple-grouser steel track pads

Model with two manually pivotable track connections each, front and rear

Machine control and levelling and steering

WI-CONTROL: high-quality control system ensuring perfect interaction between all machine features

Malfunction reports are displayed on the machine’s control screen

The existing CAN-bus system can be upgraded to customer specifications

ECO mode: performance-optimized engine management for reduced diesel consumption and low noise emission levels

Electrohydraulic proportional levelling and steering by means of a PLC system including four levelling sensors and two steering sensors


SP 64 SP 64 i


Sensor mountings adjustable in both height and range

An electronic slope sensor enables concrete to be paved at working widths of 4.00 m using a stringline on only one side

Four hydraulic levelling cylinders with a stroke of 1.00 m / 1.10 m

Vibration

Hydraulic vibrator drive for max. 12 vibrators

10x curved vibrators D66, hydraulically driven

Concrete equipment for slab paving

Slab paving mould of the 910 m series without crown function – basic width 3.50 m, including trailing side header extension 260 mm and trailing side header with transverse connection (minimum 2.00 m)

Single-piece sideplate for slab paving mould series 910 m / 910 wm

Operator’s platform

Ergonomically designed operator’s platform providing a perfect view of the paving process

Two control panels with clear, language-independent symbols for ergonomic operation

Control panel No. 1 for machine setup in line with field requirements

Control panel No. 2 with multifunctional control screen which provides the operator with the required ma-chine parameters and allows settings to be made via a menu. It can be adjusted to all directions of travel and paving configurations.

One control panel can be stored in the engine compartment. The second control panel can be protected against vandalism and weather using lockable covers.

Automated recognition of the specific machine configuration makes orientation simple for the machine operator

Miscellaneous

Comprehensive toolkit in lockable toolbox

Comprehensive safety package with EMERGENCY STOP switches

Machine hydraulics filled with mineral hydraulic oil

Standard painting in RAL 9001 (cream)

Lighting package including 4 halogen working lights, 24 V

18 19


Optional equipment features

SP 64 SP 64 i

Main frame and height adjustment

Chassis elements for continuous hydraulic telescoping to achieve working widths of up to 6.00 m

Concrete spreading equipment for slab paving

Spreading auger without crown function – basic width 3.50 m (minimum 2.00 m)

Split spreading auger with or without crown function – basic width 3.50 m

Spreading auger – extension element 0.25 m, right-handed




Spreading auger – extension element 0.25 m, left-handed




Spreading plough – basic width 3.50 m (minimum 3.00 m)

Spreading plough – extension element 0.25 m




Track system and connection of track units

Cylinder steering system for model with four B1 track units

Model with four B0 track units (four rollers), fitted with polyurethane track pads

Model with four B1 track units (six rollers), fitted with triple-grouser steel track pads

Model with four B1 track units (six rollers), fitted with polyurethane track pads

Model with two hydraulically pivotable track connections each, front and rear

Walkway extension on the left side of the machine, including handrails and access ladder. Allows crossing of the construction site via the machine. Includes the extension elements required for use with working widths ranging from 4.75 m to 6.00 m.


SP 64 SP 64 i


Slab tracer, 2 units

Slab tracer, 4 units

Control panel for manual steering of the track system

Pre-fitting for 3D levelling

Vibration

Hydraulic vibrator drive for max. 18 vibrators

Straight vibrator D66, hydraulically driven

Curved vibrator D66, hydraulically driven

Electric vibrator drive including 40-kVA generator for max. 18 vibrators

10x curved vibrators D76, electrically driven

Straight vibrator D66, electrically driven

Curved vibrator D76, electrically driven


Metering screed for slab paving mould without crown function – basic width 3.50 m (minimum 2.00 m)

Split metering screed for slab paving mould with or without crown function – basic width 3.50 m

Automatic metering screed control for concrete slab paving mould

Metering screed – extension element 0.25 m




Slab paving mould of the 910 wm series without crown function – basic width 3.50 m, including trailing side header extension 260 mm and trailing side header with transverse connection (minimum 2.00 m)

Slab paving mould of the 910 wm series with or without crown function – basic width 3.50 m, including trailing side header extension 260 mm and trailing side header with transverse connection

Slab paving mould series 900 m / 910 m – extension element 0.25 m wide

Slab paving mould series 910 m – extension element 0.50 m wide

20 21



SP 64 SP 64 i




Slab paving mould series 910 wm – extension element 0.25 m wide




Two-piece sideplate for the production of construction joints with the 910 m / 910 wm series slab paving mould

Longitudinal joint tie bar inserter for tie bars ø 12 – 25 mm, length 400 – 800 mm

Model with mounting components for attachment of a longitudinal joint tie bar inserter to the slab paving mould

Model with mounting components for attachment of a longitudinal joint tie bar inserter to the dowel bar inserter

Model with mounting components for optional attachment of a longitudinal joint tie bar inserter to the slab paving mould or dowel bar inserter

Electric control system for dowel bar inserter (DBI) and longitudinal joint tie bar inserter + chassis extension for dowel bar inserter (DBI)

Automatic dowel bar inserter (DBI) for use without crown function – basic width 3.50 m (minimum 2.50 m)

Automatic dowel bar inserter (DBI) for use with crown function – basic width 3.50 m

Floor assembly for dowel bar inserter (DBI) for paving widths of up to 3.50 m




Dowel bar inserter (DBI) – extension element 0.25 m




Load blocks as modification aid for altering the width of the dowel bar inserter (DBI)


SP 64 SP 64 i


Self-loading feature for DBI including diesel-powered hydraulic power pack

Transport frame for oscillating beam and super smoother as transport unit

Oscillating beam without crown function – basic width 3.50 m (minimum 2.00 m)

Oscillating beam with or without crown function – basic width 3.50 m

Oscillating beam – extension element 0.25 m




Super smoother – basic width 3.50 m (minimum 2.00 m)

Super smoother – extension element 0.25 m





One side tie bar inserter for straight tie bars, max. ø 20 mm, length 800 mm

Two side tie bar inserters for straight tie bars, max. ø 20 mm, length 800 mm

Concrete equipment for offset paving

One set of hydraulic components for adjusting the sideplate of a European-type offset paving mould

One set of hydraulic components for adjusting the sideplate of an American-type offset paving mould

Rigid suspension for offset paving mould

Offset paving mould up to 0.60 m wide, max. height of 0.40 m (see form TEI#2170960)

Offset paving mould from 0.60 m to 1.20 m wide, max. height of 0.40 m (see form TEI#2170960)

Offset paving mould from 1.20 m to 1.80 m wide, max. height of 0.40 m (see form TEI#2170960)

Offset paving mould up to 0.90 m high, max. base width of 0.60 m, including hopper (see form TEI#2170960)

22 23



SP 64 SP 64 i

Concrete equipment for offset paving

Offset paving mould up to 1.20 m high, max. base width of 0.60 m, including hopper (see form TEI#2170960)

Split offset paving mould up to 0.60 m wide, max. height of 0.40 m (see form TEI#2170960)

Split offset paving mould from 0.60 m to 1.20 m wide, max. height of 0.40 m (see form TEI#2170960)

Bottom part for split offset paving mould up to 0.60 m wide (max. height 0.40 m)

Bottom part for split offset paving mould from 0.60 m to 1.20 m wide (max. height 0.40 m)

Concrete feeding system

Belt conveyor 5.90 m x 0.60 m with reversible hydraulic drive, hydraulically adjustable

Belt conveyor 6.00 m x 0.60 m in folding design with reversible hydraulic drive, hydraulically adjustable

Auger conveyor 4.60 m x 0.40 m with reversible hydraulic drive, hydraulically adjustable

Auger conveyor 5.70 m x 0.40 m with reversible hydraulic drive, hydraulically adjustable

Steel chute

Steel-rubber chute

Operator’s platform

Canopy for operator’s platform, foldable manually

Miscellaneous

Painting in one special colour (RAL)

Painting in two special colours (RAL)

Painting in maximum two special colours with the lower part painted in special colour (RAL)

High-performance lighting package including 8 LED working lights, 24 V

Hydraulic high-pressure water cleaning system, 500-litre steel tank

Additional electrical water pump 24 V including 10-m hose and spray gun with handle

Additional water tank providing additional 500 litres of water

Self-levelling feature for transport mode

Halogen rotating beacon 24 V including magnetic base

SP 64 SP 64 i

Miscellaneous

Flashing beacon 24 V including magnetic base

Paving Plus package

Additional control panel for track system adjustment

WITOS® FleetView telematics system including 3-year licence (EU) –WITOS® FleetView telematics system including 3-year licence – PROMOTION –WITOS® FleetView telematics system including 3-year licence (non-EU) –Two lighting balloons, 230 V, including power generator

Two lighting balloons, 110 V, including power generator

High-performance lighting package including 4 LED working lights, 24 V, for illuminating the compaction zone

Crane system for dowel bar packs, chain drive

Crane system, hydraulic drive

Wire tensioning system, complete with 1,000 m wire rope

Second tensioning winch for levelling the machine via two wire ropes

Wire tensioning system, complete with 4 x 300 m nylon rope

Radius paving kit, fibre-glass rod as replacement for the stringline when paving corners of different radii

Daily rate for machine start-up

Export packaging


All details, illustrations and texts are non-binding and may include optional additional fittings. Subject to technical modifications. Performance data dependant upon operational conditions. No. 2579926 EN-04/18 © WIRTGEN GmbH 2018. Printed in Germany.

WIRTGEN GmbHReinhard-Wirtgen-Str. 2 · 53578 Windhagen · Germany

Phone: +49 (0) 26 45 / 131-0 · Fax: +49 (0) 26 45 / 131-392Internet: www.wirtgen.com · E-Mail: [email protected]

multipurpose machine for inset and offset applications ... · (dbi) and electric vibrator drive. 2...

Documents