Multimedia Thematic Project – Part IIILesson II

Multimedia Thematic Project – Part IIILesson II

F-18E/F Maintenance ResearchF-18E/F Maintenance Research

Joe KingUniversity of Phoenix

Designing and Producing Educational Technology 555Debora Greenfield-Fox

April 21, 2023

Joe KingUniversity of Phoenix

Designing and Producing Educational Technology 555Debora Greenfield-Fox

April 21, 2023

April 21, 2023April 21, 2023 Designing and Producing Educational Technology 555Designing and Producing Educational Technology 555 22

Lesson ObjectiveLesson Objective

• Each student will be able to successfully identify and complete the five required troubleshooting steps to identify and repair a failed/problem component(s).

• Each student will be able to successfully identify and complete the five required troubleshooting steps to identify and repair a failed/problem component(s).

April 21, 2023April 21, 2023 Designing and Producing Educational Technology 555Designing and Producing Educational Technology 555 33

Troubleshooting ProceduresTroubleshooting Procedures

• Step 1: Confirm a deficiency exists.

• Step 2: Identify the problem space.

• Step 3: Split the problem space.

• Step 4: Perform a controlled fix.

• Step 5: Test the solution.

• Step 1: Confirm a deficiency exists.

• Step 2: Identify the problem space.

• Step 3: Split the problem space.

• Step 4: Perform a controlled fix.

• Step 5: Test the solution.

April 21, 2023April 21, 2023 Designing and Producing Educational Technology 555Designing and Producing Educational Technology 555 44

Scoring RubricScoring Rubric

Student Designed Troubleshooting Rubric

3 5 10

Confirm that a deficiency

exists

Had trouble with equipment, and failed to confirm deficiency exists.

Could work equipment, but had trouble confirming deficiency exists.

Could use equipment properly, and confirmed deficiency exists.

Identify the problem

space

Could not properly find the problem space

Could identify aircraft system only Properly identified the problem space.

Split the problem

space

Could not split the problem space Could locate aircraft system only Properly split the problem space.

Perform a controlled

fix

Could not remove or repair failed component

Could remove failed component, but could not install new component

Properly performed a remove and replace of faulty component.

Test the solutionUnsure how to test the solution Could run the test, but test failed. Properly tested the solution.

April 21, 2023April 21, 2023 Designing and Producing Educational Technology 555Designing and Producing Educational Technology 555 55

Exit SurveyExit Survey

Student Survey(Check the appropriate box)

1Strongly Disagree

2

Disagree

3No

Opinion

4

Agree

5Strongly

Agree

The physical classroom environment was satisfactory.

The course registration process was easy to complete.

The availability of the course was convenient for my schedule.

The location of the course was convenient.

The course content was applicable to my job duties.

The course instructor(s) were knowledgeable of the subject.

Completing this course has made me more comfortable working at Boeing.

April 21, 2023April 21, 2023 Designing and Producing Educational Technology 555Designing and Producing Educational Technology 555 66

QuestionsQuestions