multi-zone batch fertigation system - agrowtek · 2020. 5. 15. · reached and the batch is ready...

2
GrowControl™ BDX Batch Dosing & Fertigation System is a nutrient mixing and irrigation system for pre-mixing and dispensing to plants, hydroponic systems or holding tanks. Control and schedule 5/6 zones and add up to 8 more zones with an 8-valve expansion panel for a total of 14 valves. Avail- able with 5, 10 or 12 persitaltic dosing pumps for mixing multi-part fertilizer solutions on the fly according to fertilizer ratio recipies and EC/pH/ORP targets. Available with redundant sensors for enhanced error detection and backup operation. Alarms and automatic shut down functions standard. Compact system is easy to use and maintain. Pre-fabricated assembly on stainless steel back panel mounts to wall surface for simple installation. System includes a recirculating/irrigation pump with outlet control relay and SXL liquid sensors for detecting high and low levels in the mixing tank. Available with VBT series mixing tanks between 55-350 gallon capacity, or supply your own mixing tank (recommended up to 500 gallons max.) Multi-Zone Batch Fertigation System • Up to 12 Peristaltic Pumps for Dosing Chemicals • 3,000mL/hr Injection Rate (12,000mL/hr optional) • Dual pH/EC/ORP sensor options • Alarms: Sensor Difference, pH No-Change / Wrong Direction Component Failure, Low Water Flow, Tank Overfill / Empty, Batch Deviation, pH Re-Correct, Feed Timeout, and more. Made in USA Return to Mix Tank Dosing Pumps Fertigation Controller 10.1” Touch Screen with Ethernet Stainless Steel Wall Mountable Back Panel pH/EC/Temp Sensors (ORP/DO opt.) 7” Wall-Mount Depth Fresh Water Inlet Valve Requires Pressurized Supply Minimum: 4 psi Mix Valve Zone Valves Inlet from Tank Pump Drain Valve (or 6th zone) Expansion Valve Panel 39.63” 39” Check Valve Flow Sensor Redundant Sensors (opt.) • 50-350 gal batches,100-300gal/hr typical • 22gpm 30psi Recirculator/Irrigation Pump (10A/120V) • 10.1” Intuitive Color Touch Screen Controller • Valves: 1 Water Fill, 1 Mix, 5/6 Zones (1 Drain) • Add up to 8 more Zone Valves with Expansion Panel • Maintain up to 10 stock tanks with DXI8 Trigger Module © Agrowtek Inc. | www.agrowtek.com | Technology to Help You Grow™ Technology to Help You Grow AGROWtEK BDX BatchMATIC™ Fertigation System System Overview Specifications

Upload: others

Post on 12-Aug-2021

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Multi-Zone Batch Fertigation System - Agrowtek · 2020. 5. 15. · reached and the batch is ready to feed. 1. Fill The mix valve closes and the zone valve opens. The main pump starts

GrowControl™ BDX Batch Dosing & Fertigation System is a nutrient mixing and irrigation system for pre-mixing and dispensing to plants, hydroponic systems or holding tanks. Control and schedule 5/6 zones and add up to 8 more zones with an 8-valve expansion panel for a total of 14 valves. Avail-able with 5, 10 or 12 persitaltic dosing pumps for mixing multi-part fertilizer solutions on the fly according to fertilizer ratio recipies and EC/pH/ORP targets. Available with redundant sensors for enhanced error detection and backup operation. Alarms and automatic shut down functions standard. Compact system is easy to use and maintain. Pre-fabricated assembly on stainless steel back panel mounts to wall surface for simple installation.

System includes a recirculating/irrigation pump with outlet control relay and SXL liquid sensors for detecting high and low levels in the mixing tank. Available with VBT series mixing tanks between 55-350 gallon capacity, or supply your own mixing tank (recommended up to 500 gallons max.)

Multi-Zone Batch Fertigation System

• Up to 12 Peristaltic Pumps for Dosing Chemicals• 3,000mL/hr Injection Rate (12,000mL/hr optional)• Dual pH/EC/ORP sensor options• Alarms: Sensor Difference, pH No-Change / Wrong Direction Component Failure, Low Water Flow, Tank Overfill / Empty, Batch Deviation, pH Re-Correct, Feed Timeout, and more.

Made in USA

Return to Mix Tank

DosingPumps

Fertigation Controller10.1” Touch Screen

with Ethernet

Stainless SteelWall Mountable

Back Panel

pH/EC/TempSensors

(ORP/DO opt.)

7”Wall-Mount Depth

Fresh Water Inlet ValveRequires Pressurized Supply

Minimum: 4 psi MixValve

ZoneValves

Inlet fromTank Pump

Drain Valve(or 6th zone)

ExpansionValve Panel

39.63”

39”

Check Valve

Flow Sensor

RedundantSensors

(opt.)

• 50-350 gal batches,100-300gal/hr typical • 22gpm 30psi Recirculator/Irrigation Pump (10A/120V)• 10.1” Intuitive Color Touch Screen Controller • Valves: 1 Water Fill, 1 Mix, 5/6 Zones (1 Drain)• Add up to 8 more Zone Valves with Expansion Panel• Maintain up to 10 stock tanks with DXI8 Trigger Module

Made in USA

© Agrowtek Inc. | www.agrowtek.com | Technology to Help You Grow™

Technology to Help You GrowAGROWtEK BDX

BatchMATIC™ Fertigation System

System Overview

Specifications

Page 2: Multi-Zone Batch Fertigation System - Agrowtek · 2020. 5. 15. · reached and the batch is ready to feed. 1. Fill The mix valve closes and the zone valve opens. The main pump starts

Ordering Options

System Includes Optional Components

BDX fertigation systems automate filling of a mixing tank to a specific volume with water, followed by dosing cycles to achieve the desired ppm and pH levels according to the recipe. Once the mixing is complete, the solution is pumped through the respective valve to a room’s hydroponic system, drippers or a holding tank. When the tank is empty and watering is complete, the next recipe can be mixed and irrigated according to the programmed schedule.

BDX10 - 200 +ORP - 2

None: pH, EC & Temperature+ORP: Add ORP

Doser Pump Model200: 160mL/min per pump

1: Single Sensor Manifold2: Dual Sensor Manifolds

Doser Pumps5, 10 or 12 pump parts

At the start of a scheduled fertigation cycle, the fill valve opens supplying fresh water to the mixing tank. Tank may be filled fully or partially according to the parameters. The high level sensor on the tank prevents over filling.

The fill valve closes and the mix valve opens. The main pump starts recircu-lating water through the manifolds and the chemicals are injected by the dosing pumps until the set points are reached and the batch is ready to feed.

1. Fill

The mix valve closes and the zone valve opens. The main pump starts feeding from the mix tank to the plants until the low level sensor detects that the tank is empty. The system moves on to the next batch in the schedule.

•BDX Dosing Panel, Assembled (specify model)•RX1i Pump Control Relay•22GPM 1/2HP 120V Cast Iron Circulator/Irrigation Pump•SXL High & Low Mix Tank Sensors

•Mixing Tank•Plumbing & Fittings for Pump & Valves•Pressurized Fill Water Supply (Pressure Switch Pump)

VXP8 Eight Valve Expansion Panel

VBT Vertical BatchMixing Tank & Stand

DXI8 Eight InputTrigger Module

© Agrowtek Inc. | www.agrowtek.com | Technology to Help You Grow™

BDXBatchMATIC™ Fertigation System

2. Mix 3. Feed

Not Included (customer supplied)