multi tube facade system (educational project) - poster (jun 2007)
DESCRIPTION
Concept: The Multi Tube facade system is developed to create a comfortable indoor climate by encapsulating all installations in the facade providing diffuse lighting, diffuse ventilation and diffuse heating and cooling over the entire double curved surface. The Multi Tube facade system is based on a triple layer design. The two outer layers are made of twined pvc tubes of which the verticals span the double curved surface and the horizontal tubes contain a liquid controlling the building physics. The tubes change direct sunlight into a uniform diffusely lit surface and control the temperature. The inner layer of etfe foil cushions controls the ventilation and provides insulation. The tubes on the outside also work as a windbreaker and as a solar energy collector in which the liquid is used as a medium to store the energy in the soil. At low temperatures the tubes are emptied and act as an extra insulation layer. The tubes on the inside also contain liquid which is preheated or –cooled and thereby control the temperature of the interior. Fresh air is ventilated through the facade while controlled by the inner layer consisting of etfe foil cushions which allow air to pass when a mechanism slightly separates them. Mechanical ventilation is added between the cushions and the tubes layer on the inside to prevent draft and have full control over the temperature. This project was designed as educational project within the Architecture, Urbanism & Building Sciences master program (1st semester) at Delft University of Technology (TU Delft). Team: Jasper Moelker, Jasper OverkleeftTRANSCRIPT
0
20
40
60
80
100
120
140
31.5 63 125 250 500 1 k 2 k 4 k 8 k 16 k0
20
40
60
80
100
120
140
31.5 63 125 250 500 1 k 2 k 4 k 8 k 16 k
sou
nd
resi
stan
ce [d
B]
frequency [Hz]
3mm4mm7mm
3 - 20 - 4R(3) + R(4) + 6
10
0
-10 C
OUT
IN
soilwaterpump
multi tube innovative facade system_________________________________________________________
multi tube innovative facade system
multi tube innovative facade system
jasper moelker & jasper overkleeft june 2007
physical models <
prototype <
> system concept
> mechanics
> climate
> acoustics
> criteria
> technique
The Multi Tube facade system is developed to create a comfortable indoor climate by encapsulating all installations in the facade providing diffuse lighting, diffuse ventilation and diffuse heating and cool-ing over the entire double curved surface.The Multi Tube facade system is based on a triple layer design. The two outer layers are made of twined pvc tubes of which the verticals span the double curved surface and the horizontal tubes contain a liquid controlling the building physics. The tubes change direct sunlight into a uniform diffusely lit surface and control the temperature. The inner layer of etfe foil cushions controls the ventilation and provides insulation.The tubes on the outside also work as a windbreaker and as a solar energy collector in which the liquid is used as a medium to store the energy in the soil. At low temperatures the tubes are emptied and act as an extra insulation layer. The tubes on the inside also contain liquid which is preheated or –cooled and thereby control the temperature of the interior. Fresh air is ventilated through the facade while controlled by the inner layer consisting of etfe foil cushions which allow air to pass when a mechanism slightly separates them. Mechanical ventilation is added between the cushions and the tubes layer on the inside to prevent draft and have full control over the temperature.