multi-purpose tanks - taco comfort solutions · multi-purpose tanks ... • designed and...

Multi-Purpose TanksOur line of Chilled Water and Hot Water Multi-Purpose tanks deliver all the quality and performance you expect from Taco products. They are built to last with shell, heads and ANSI flanges with ASME constructed for 125 & 150 psi working pressures all while providing outstanding performance in the field, up to a maximum operating temperature of 240°F.These products are available in standard sizes from 2” through 10” to meet the needs of a broad range of applications with custom unit sizes available. Our tank volumes range from 50 gallons up to 1050 gallons with, 8 options, 16 sizes as standard and custom sizes to meet our customers’ requirements.

Hydronic Accessories

©Taco Catalog # #400-5.1 Supersedes: 08/18/15

Effective Date: 04/21/17Printed in USA

Specifications

Flanged (F) Grooved (G) Threaded (T)

SPECIFICATIONS• Designed and constructed per ASME Code Section VIII, Division 1

• Construction: Carbon Steel with exterior red oxide primer finish

• Standard Design Pressure and Temperature: 125 psi @ 240°F

• Flanged inlet and outlet System Connections (standard sizes shown)

• Registered with the National Board of Pressure Vessel Manufacturers

• Integral Air Vent (Suitable for water, max. 50% glycol)

• Factory installed 2' Blow Down Valve

• Brass Flushing Cock

• (1) 3/4' Temperature/ Pressure port on shell

• U-1A Data Report

• 304 stainless steel coalescence pall rings on Options C, D, E, F, G & H

• (1) 2” NPT Inspection Opening – MPT0050 thru MPT0350• (2) 4”X6” Inspection Handholes – MPT0400 thru MPT1050

OPTIONS (Consult Factory)• Optional materials of construction

• Higher design pressures and temperatures

• Optional System Connection sizes available

THERMAL INSULATION

• None

• Chilled Water 1⁄2' Armaflex ( C )

• Heating Water 1' Silicon Blanket ( H )

• Other _ D, E, F, G, J, K, L, M, P, R, S & T _ See page 19 for details

OTIONAL CONNECTION TYPES• ‘T’ Female NPT Threaded 2” & 2 1/2” only Available only on sizes, MPT0050 thru MPT0350

• 3/4' NPT Temperature/Pressure Ports

• (5) 3/4' Temperature/ Pressure ports: One port on shell and on each nozzle

• Optional Anchor Clips

• 150 PSI Working Pressure

Saddles Base Ring Legs

Chilled WaterInsulation

Chilled/Hot Water withAluminum Jacket Insulation

Hot WaterInsulation

Taco Comfort Solutions is pleased to offer a sizing app to aid in the sizing of Multi-Purpose Tanks. Find the Buffer Tanks Wizard at: www.taco-hvac.com/wizard_buffer_tanks.html

SIZE O.D. B.C. #HOLES HOLE DIA. CL-CL2” 6” 4-3/4” 4 3/4” 3.359

3” 7-1/2” 6” 4 3/4” 4.243

4” 9” 7-1/2” 8 3/4” 2.870

6” 11” 9-1/2” 8 7/8” 3.635

8” 13-1/2” 11-3/4” 8 7/8” 4.497

10” 16” 14-1/4” 12 1” 3.688

ANSI Flange Data Table Class 150 RF30

INSULATION OPTIONS FOR ALL TACO MULTI-PURPOSE TANKS

Many applications arise where a boiler or chiller may operate in a short cycle condition. Short cycling of the boiler or chiller is not recommended due to the high possibility of damage and or shortened component life, Short cycling is frequently due to the lack of BTU load balance between the demand of the hydronic system and the chiller or boiler BTU capacity.

A Multi-Purpose Tanks (MPT) is often utilized to introduce additional system fluid volume into the hydronic system to reduce the likelihood of this short cycling. A properly sized buffer tank optimizes the operation of the chiller or boiler and often introduces BTU storage allowing the system to operate without cycling the chiller or boiler. MPT’s are available in vertical or horizontal orientations with a wide range of diameters and lengths (available storage volumes.)

Anchor Clips (A)

2” & 2-1/2”

Only

-2-

Quick Reference Guide

Refer to standard submittal as this sheet is a “Quick Reference Guide” only.Go to www.TacoComfort.com > Products > Multi-Purpose Tanks > Submittals

401-194 Effective Date June 1, 2016

MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA

GAL. GAL. INCH INCH INCH INCH INCH INCH INCH LBS. LBS. (SQ. FT.)

MPT0050F_-125N1AN 50 55 20 43 30 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075F_-125N1AN 75 82 24 46 34 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100F_-125N1AN 100 111 24 61 34 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125F_-125N1AN 125 139 24 76 34 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150F_-125N1AN 150 168 30 60 40 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180F_-125N1AN 180 201 30 71 40 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200F_-125N1AN 200 222 30 78 40 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250F_-125N1AN 250 278 36 69 46 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300F_-125N1AN 300 334 36 82 46 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350F_-125N1AN 350 386 36 94 46 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400F_-125N1AN 400 443 48 65 58 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450F_-125N1AN 450 497 48 72 58 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500F_-125N1AN 500 551 48 79 58 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700F_-125N1AN 700 712 48 100 58 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850F_-125N1AN 850 873 54 99 64 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050F_-125N1AN 1050 1,077 60 99 70 25-3/4 54 14 6, 8, 10 2370 10,887 143

SIZES & DIMENSIONSAll dimensions shown are subject to change and should not be used for pre-piping.Contact your local Taco representative should certified dimensional drawings be required.

Nozzle Ports are shown for placement and clarity only. ** Add 2” to “C” dimension when specifying 10” nozzles

401-194 OPTION AFLANGED NOZZLES @ 180

SPECIFICATIONS• Designed and constructed per ASME Code Section VIII, Division 1.• Construction: Carbon Steel with exterior red oxide primer finish• Standard Design Pressure and Temperature: 125 psi @ 240°F• Flanged inlet and outlet System Connections (standard sizes shown)• Registered with the National Board of Pressure Vessel Manufacturers• Integral Air Vent (Suitable for water, max. 50% glycol) • Factory installed 2" Blow Down Valve• Brass Flushing Cock• U-1A Data Report• (1) 2” NPT Inspection Opening – MPT0050 thru MPT0350 • (2) 4”X6” Inspection Handholes – MPT0400 thru MPT1050• (1) 3/4" Temperature/ Pressure port on shell• Optional 150 PSI working pressure

OPTIONS (Consult Factory)• Optional materials of construction• Higher design pressures and temperatures• Optional System Connection sizes available• Thermal insulation

o Noneo Chilled Water 1⁄2" Armaflexo Heating Water 1" Silicon Blanketo Other _________________

• Optional Connection Typeso ‘T’ Female NPT Threaded 2” & 2 1/2” only.

Available only on sizes, MPT0050 thru MPT0350• 3⁄4" NPT Temperature/ Pressure Ports

o (5) 3/4" Temperature/ Pressure ports: One port on shell and on each nozzle

• o Optional Anchor Clips• o 150 PSI Working Pressure

Submittal Data Information“MPT” Option A Flanged Vertical Multi-Purpose Tanks

401-194

ITEM LOCATION MODEL QUANTITY GALLONS

MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E

DIAMETER F G APPROX.WEIGHT

GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050F_-125N1AN 50 20 43 30 111⁄2 18 127⁄8 2, 3, 4 270MPT0075F_-125N1AN 75 24 46 34 125⁄8 20 127⁄8 2, 3, 4 320MPT0100F_-125N1AN 100 24 61 34 125⁄8 20 127⁄8 2, 3, 4 360MPT0125F_-125N1AN 125 24 76 34 125⁄8 20 127⁄8 2, 3, 4 410MPT0150F_-125N1AN 150 30 60 40 141⁄4 24 131⁄2 2, 3, 4 600MPT0180F_-125N1AN 180 30 71 40 141⁄4 24 131⁄2 2, 3, 4 680MPT0200F_-125N1AN 200 30 78 40 141⁄4 24 131⁄2 2, 3, 4 720MPT0250F_-125N1AN 250 36 69 46 163⁄4 30 131⁄2 3, 4, 6 830MPT0300F_-125N1AN 300 36 82 46 163⁄4 30 131⁄2 3, 4, 6 940MPT0350F_-125N1AN 350 36 94 46 163⁄4 30 131⁄2 3, 4, 6 1030MPT0400F_-125N1AN 400 48 65 58 195⁄8 44 127⁄8 4, 6, 8 1230MPT0450F_-125N1AN 450 48 72 58 195⁄8 44 127⁄8 4, 6, 8 1300MPT0500F_-125N1AN 500 48 79 58 195⁄8 44 127⁄8 4, 6, 8 1380MPT0700F_-125N1AN 700 48 100 58 195⁄8 44 127⁄8 4, 6, 8 1520MPT0850F_-125N1AN 850 54 99 64 231⁄2 50 131⁄8 4, 6, 8 2110MPT1050F_-125N1AN 1050 60 99 70 253⁄4 54 14 6, 8, 10 2370

Nozzle Ports are shown for placement and clarity only. ** Add 2” to "C" dimension when specifying 10" nozzles

SIZES & DIMENSIONSAll dimensions shown are subject to change and should not be used for pre-piping. Contact your local Taco representative should certified dimensional drawings be required.

*Complete Model Number

as shown below:MPT0050F04-125N1AN

“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8

SUPERSEDES: June 1, 2016 EFFECTIVE: June 16, 2016

Job:

NOZZLE SIZESOFFERED

Circle desired size below.

* Inspection Openings(1) 2" NPTF Models 50through 350

*

400-1050 50-350

“MPT” Option A Flanged Vertical Multi-Purpose Tanks

* Inspection Openings(2) 4" x 6" Models 400through 1050

-3-

401-220 OPTION BFLANGED NOZZLES @ 90

Submittal Data Information“MPT” Option B Flanged Vertical Multi-Purpose Tanks

Corner Model

401-220


MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E


GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050F_-125N1BN 50 20 43 25 111⁄2 18 127⁄8 2, 3, 4 270MPT0075F_-125N1BN 75 24 46 29 125⁄8 20 127⁄8 2, 3, 4 320MPT0100F_-125N1BN 100 24 61 29 125⁄8 20 127⁄8 2, 3, 4 360MPT0125F_-125N1BN 125 24 76 29 125⁄8 20 127⁄8 2, 3, 4 410MPT0150F_-125N1BN 150 30 60 35 141⁄4 24 131⁄2 2, 3, 4 600MPT0180F_-125N1BN 180 30 71 35 141⁄4 24 131⁄2 2, 3, 4 680MPT0200F_-125N1BN 200 30 78 35 141⁄4 24 131⁄2 2, 3, 4 720MPT0250F_-125N1BN 250 36 69 41 163⁄4 30 131⁄2 3, 4, 6 830MPT0300F_-125N1BN 300 36 82 41 163⁄4 30 131⁄2 3, 4, 6 940MPT0350F_-125N1BN 350 36 94 41 163⁄4 30 131⁄2 3, 4, 6 1030MPT0400F_-125N1BN 400 48 65 53 195⁄8 44 127⁄8 4, 6, 8 1230MPT0450F_-125N1BN 450 48 72 53 195⁄8 44 127⁄8 4, 6, 8 1300MPT0500F_-125N1BN 500 48 79 53 195⁄8 44 127⁄8 4, 6, 8 1380MPT0700F_-125N1BN 700 48 100 53 195⁄8 44 127⁄8 4, 6, 8 1520MPT0850F_-125N1BN 850 54 99 59 231⁄2 50 131⁄8 4, 6, 8 2110MPT1050F_-125N1BN 1050 60 99 65 253⁄4 54 14 6, 8, 10 2370

SPECIFICATIONS • Designed and constructed per ASME Code Section VIII, Division 1. • Construction: Carbon Steel with exterior red oxide primer finish • Standard Design Pressure and Temperature: 125 psi @ 240°F • Flanged inlet and outlet System Connections (standard sizes shown) • Registered with the National Board of Pressure Vessel Manufacturers • Integral Air Vent (Suitable for water, max. 50% glycol) • Factory installed 2" Blow Down Valve

• Brass Flushing Cock • U-1A Data Report • (1) 2” NPT Inspection Opening – MPT0050 thru MPT0350 • (2) 4”X6” Inspection Handholes – MPT0400 thru MPT1050 • (1) 3/4" Temperature/ Pressure port on shell

OPTIONS (Consult Factory) • Optional materials of construction • Higher design pressures and temperatures • Optional System Connection sizes available • Thermal insulation o None o Chilled Water 1⁄2" Armaflex o Heating Water 1" Silicon Blanket

o Other _________________ • Optional Connection Types o ‘T’ Female NPT Threaded 2” & 2 1/2” only Available only on sizes, MPT0050 thru MPT0350 • 3/4" NPT Temperature/Pressure Ports o (5) 3/4" Temperature/ Pressure ports:

One port on shell and on each nozzle • o Optional Anchor Clips • o 150 PSI Working Pressure




as shown below:MPT0050F04-125N1BN


Job:

“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8

NOZZLE SIZESOFFERED



Quick Reference Guide 401-220 Effective Date June 1, 2016

MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA


MPT0050F_-125N1BN 50 55 20 43 25 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075F_-125N1BN 75 82 24 46 29 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100F_-125N1BN 100 111 24 61 29 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125F_-125N1BN 125 139 24 76 29 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150F_-125N1BN 150 168 30 60 35 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180F_-125N1BN 180 201 30 71 35 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200F_-125N1BN 200 222 30 78 35 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250F_-125N1BN 250 278 36 69 41 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300F__-125N1B 300 334 36 82 41 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350F_-125N1BN 350 386 36 94 41 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400F_-125N1BN 400 443 48 65 53 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450F_-125N1BN 450 497 48 72 53 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500F_-125N1BN 500 551 48 79 53 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700F_-125N1BN 700 712 48 100 53 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850F_-125N1BN 850 873 54 99 59 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050F_-125N1BN 1050 1,077 60 99 65 25-3/4 54 14 6, 8, 10 2370 10,887 143




*

“MPT” Option B Flanged Vertical Multi-Purpose Tanks Corner Model

400-1050 50-350


-4-




MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA


MPT0050F_-125N1CN 50 55 20 43 30 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075F_-125N1CN 75 82 24 46 34 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100F_-125N1CN 100 111 24 61 34 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125F_-125N1CN 125 139 24 76 34 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150F_-125N1CN 150 168 30 60 40 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180F_-125N1CN 180 201 30 71 40 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200F_-125N1CN 200 222 30 78 40 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250F_-125N1CN 250 278 36 69 46 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300F_-125N1CN 300 334 36 82 46 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350F_-125N1CN 350 386 36 94 46 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400F_-125N1CN 400 443 48 65 58 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450F_-125N1CN 450 497 48 72 58 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500F_-125N1CN 500 551 48 79 58 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700F_-125N1CN 700 712 48 100 58 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850F_-125N1CN 850 873 54 99 64 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050F_-125N1CN 1050 1,077 60 99 70 25-3/4 54 14 6, 8, 10 2370 10,887 143



401-204 OPTION CFLANGED NOZZLES @ 180

SPECIFICATIONS• Designed and constructed per ASME Code Section VIII, Division 1.• Construction: Carbon Steel with exterior red oxide primer finish• Standard Design Pressure and Temperature: 125 psi @ 240°F• Flanged inlet and outlet System Connections (standard sizes shown)• Registered with the National Board of Pressure Vessel Manufacturers• Integral Air Vent (Suitable for water, max. 50% glycol) • Factory installed 2" Blow Down Valve• Brass Flushing Cock• 304 stainless steel coalescence pall rings• U-1A Data Report• (1) 2” NPT Inspection Opening – MPT0050 thru MPT0350 • (2) 4”X6” Inspection Handholes – MPT0400 thru MPT1050• (1) 3/4" Temperature/ Pressure port on shell

OPTIONS (Consult Factory)• Optional materials of construction• Higher design pressures and temperatures• Optional System Connection sizes available• Thermal insulation






Submittal Data Information“MPT” Option C Flanged Vertical Multi-Purpose Tanks

With 2 Internal Pall Ring Baskets

401-204


MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E


GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050F_-125N1CN 50 20 43 30 111⁄2 18 127⁄8 2, 3, 4 310MPT0075F_-125N1CN 75 24 46 34 125⁄8 20 127⁄8 2, 3, 4 360MPT0100F_-125N1CN 100 24 61 34 125⁄8 20 127⁄8 2, 3, 4 400MPT0125F_-125N1CN 125 24 76 34 125⁄8 20 127⁄8 2, 3, 4 450MPT0150F_-125N1CN 150 30 60 40 141⁄4 24 131⁄2 2, 3, 4 640MPT0180F_-125N1CN 180 30 71 40 141⁄4 24 131⁄2 2, 3, 4 720MPT0200F_-125N1CN 200 30 78 40 141⁄4 24 131⁄2 2, 3, 4 760MPT0250F_-125N1CN 250 36 69 46 163⁄4 30 131⁄2 3, 4, 6 890MPT0300F_-125N1CN 300 36 82 46 163⁄4 30 131⁄2 3, 4, 6 1000MPT0350F_-125N1CN 350 36 94 46 163⁄4 30 131⁄2 3, 4, 6 1090MPT0400F_-125N1CN 400 48 65 58 195⁄8 44 127⁄8 4, 6, 8 1310MPT0450F_-125N1CN 450 48 72 58 195⁄8 44 127⁄8 4, 6, 8 1380MPT0500F_-125N1CN 500 48 79 58 195⁄8 44 127⁄8 4, 6, 8 1460MPT0700F_-125N1CN 700 48 100 58 195⁄8 44 127⁄8 4, 6, 8 1600MPT0850F_-125N1CN 850 54 99 64 231⁄2 50 131⁄8 4, 6, 8 2190MPT1050F_-125N1CN 1050 60 99 70 253⁄4 54 14 6, 8, 10 2500




as shown below:MPT0050F04-125N1CN

“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8


Job:

NOZZLE SIZESOFFERED



*

“MPT” Option C Flanged Vertical Multi-Purpose Tanks With 2 Internal Pall Ring Baskets

400-1050 50-350


-5-



MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA


MPT0050F_-125N1DN 50 55 20 43 30 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075F_-125N1DN 75 82 24 46 34 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100F_-125N1DN 100 111 24 61 34 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125F_-125N1DN 125 139 24 76 34 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150F_-125N1DN 150 168 30 60 40 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180F_-125N1DN 180 201 30 71 40 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200F_-125N1DN 200 222 30 78 40 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250F_-125N1DN 250 278 36 69 46 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300F_-125N1DN 300 334 36 82 46 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350F_-125N1DN 350 386 36 94 46 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400F_-125N1DN 400 443 48 65 58 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450F_-125N1DN 450 497 48 72 58 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500F_-125N1DN 500 551 48 79 58 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700F_-125N1DN 700 712 48 100 58 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850F_-125N1DN 850 873 54 99 64 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050F_-125N1DN 1050 1,077 60 99 70 25-3/4 54 14 6, 8, 10 2370 10,887 143



401-205 OPTION DFLANGED NOZZLES @ 180

Submittal Data Information“MPT” Option D Flanged Vertical Multi-Purpose Tanks

with 2 Internal Pall Ring Baskets

401-205


MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E


GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050F_-125N1DN 50 20 43 30 111⁄2 18 127⁄8 2, 3, 4 310MPT0075F_-125N1DN 75 24 46 34 125⁄8 20 127⁄8 2, 3, 4 360MPT0100F_-125N1DN 100 24 61 34 125⁄8 20 127⁄8 2, 3, 4 400MPT0125F_-125N1DN 125 24 76 34 125⁄8 20 127⁄8 2, 3, 4 450MPT0150F_-125N1DN 150 30 60 40 141⁄4 24 131⁄2 2, 3, 4 640MPT0180F_-125N1DN 180 30 71 40 141⁄4 24 131⁄2 2, 3, 4 720MPT0200F_-125N1DN 200 30 78 40 141⁄4 24 131⁄2 2, 3, 4 760MPT0250F_-125N1DN 250 36 69 46 163⁄4 30 131⁄2 3, 4, 6 890MPT0300F_-125N1DN 300 36 82 46 163⁄4 30 131⁄2 3, 4, 6 1000MPT0350F_-125N1DN 350 36 94 46 163⁄4 30 131⁄2 3, 4, 6 1090MPT0400F_-125N1DN 400 48 65 58 195⁄8 44 127⁄8 4, 6, 8 1310MPT0450F_-125N1DN 450 48 72 58 195⁄8 44 127⁄8 4, 6, 8 1380MPT0500F_-125N1DN 500 48 79 58 195⁄8 44 127⁄8 4, 6, 8 1460MPT0700F_-125N1DN 700 48 100 58 195⁄8 44 127⁄8 4, 6, 8 1600MPT0850F_-125N1DN 850 54 99 64 231⁄2 50 131⁄8 4, 6, 8 2190MPT1050F_-125N1DN 1050 60 99 70 253⁄4 54 14 6, 8, 10 2500




as shown below:MPT0050F04-125N1DN

“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8


Job:

SPECIFICATIONS • Designed and constructed per ASME Code Section VIII, Division 1. • Construction: Carbon Steel with exterior red oxide primer finish • Standard Design Pressure and Temperature: 125 psi @ 240°F • Flanged inlet and outlet System Connections (standard sizes shown) • Registered with the National Board of -Pressure Vessel Manufacturers • Integral Air Vent (Suitable for water, max. 50% glycol) l • Factory installed 2" Blow Down Valve

• Brass Flushing Cock• 304 stainless steel coalescence pall rings

• U-1A Data Report • (1) 2” NPT Inspection Opening – MPT0050 thru MPT0350 • (2) 4”X6” Inspection Handholes – MPT0400 thru MPT1050 • (1) 3/4" Temperature/ Pressure port on shellOPTIONS (Consult Factory) • Optional materials of construction • Higher design pressures and temperatures • Optional System Connection sizes available • Thermal insulation o None o Chilled Water 1⁄2" Armaflex o Heating Water 1" Silicon Blanket



NOZZLE SIZESOFFERED



*

400-1050 50-350

“MPT” Option D Flanged Vertical Multi-Purpose Tanks with 2 Internal Pall Ring Baskets


-6-




MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA


MPT0050F_-125N1EN 50 55 20 43 25 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075F_-125N1EN 75 82 24 46 29 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100F_-125N1EN 100 111 24 61 29 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125F_-125N1EN 125 139 24 76 29 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150F_-125N1EN 150 168 30 60 35 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180F_-125N1EN 180 201 30 71 35 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200F_-125N1EN 200 222 30 78 35 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250F_-125N1EN 250 278 36 69 41 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300F_-125N1EN 300 334 36 82 41 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350F_-125N1EN 350 386 36 94 41 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400F_-125N1EN 400 443 48 65 53 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450F_-125N1EN 450 497 48 72 53 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500F_-125N1EN 500 551 48 79 53 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700F_-125N1EN 700 712 48 100 53 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850F_-125N1EN 850 873 54 99 59 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050F_-125N1EN 1050 1,077 60 99 65 25-3/4 54 14 6, 8, 10 2370 10,887 143



Submittal Data Information“MPT” Option E Flanged Vertical Multi-Purpose Tanks

Corner Model with 2 Internal Pall Ring Baskets

401-206


MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E


GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050F_-125N1EN 50 20 43 25 111⁄2 18 127⁄8 2, 3, 4 310MPT0075F_-125N1EN 75 24 46 29 125⁄8 20 127⁄8 2, 3, 4 360MPT0100F_-125N1EN 100 24 61 29 125⁄8 20 127⁄8 2, 3, 4 400MPT0125F_-125N1EN 125 24 76 29 125⁄8 20 127⁄8 2, 3, 4 450MPT0150F_-125N1EN 150 30 60 35 141⁄4 24 131⁄2 2, 3, 4 640MPT0180F_-125N1EN 180 30 71 35 141⁄4 24 131⁄2 2, 3, 4 720MPT0200F_-125N1EN 200 30 78 35 141⁄4 24 131⁄2 2, 3, 4 760MPT0250F_-125N1EN 250 36 69 41 163⁄4 30 131⁄2 3, 4, 6 890MPT0300F_-125N1EN 300 36 82 41 163⁄4 30 131⁄2 3, 4, 6 1000MPT0350F_-125N1EN 350 36 94 41 163⁄4 30 131⁄2 3, 4, 6 1090MPT0400F_-125N1EN 400 48 65 53 195⁄8 44 127⁄8 4, 6, 8 1310MPT0450F_-125N1EN 450 48 72 53 195⁄8 44 127⁄8 4, 6, 8 1380MPT0500F_-125N1EN 500 48 79 53 195⁄8 44 127⁄8 4, 6, 8 1460MPT0700F_-125N1EN 700 48 100 53 195⁄8 44 127⁄8 4, 6, 8 1600MPT0850F_-125N1EN 850 54 99 59 231⁄2 50 131⁄8 4, 6, 8 2190MPT1050F_-125N1EN 1050 60 99 65 253⁄4 54 14 6, 8, 10 2500



• U-1A Data Report • (1) 2” NPT Inspection Opening – MPT0050 thru MPT0350 • (2) 4”X6” Inspection Handholes – MPT0400 thru MPT1050 • (1) 3/4" Temperature/ Pressure port on shell







as shown below:MPT0050F04-125N1EN

SUPERSEDES:June 9, 2016 EFFECTIVE: June 16, 2016

Job:

“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8

NOZZLE SIZESOFFERED



*

400-1050 50-350

“MPT” Option E Flanged Vertical Multi-Purpose Tanks Corner Model with 2 Internal Pall Ring Baskets


-7-



MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA


MPT0050F_-125N1FN 50 55 20 43 25 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075F_-125N1FN 75 82 24 46 29 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100F_-125N1FN 100 111 24 61 29 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125F_-125N1FN 125 139 24 76 29 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150F_-125N1FN 150 168 30 60 35 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180F_-125N1FN 180 201 30 71 35 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200F_-125N1FN 200 222 30 78 35 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250F_-125N1FN 250 278 36 69 41 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300F_-125N1FN 300 334 36 82 41 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350F_-125N1FN 350 386 36 94 41 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400F_-125N1FN 400 443 48 65 53 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450F_-125N1FN 450 497 48 72 53 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500F_-125N1FN 500 551 48 79 53 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700F_-125N1FN 700 712 48 100 53 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850F_-125N1FN 850 873 54 99 59 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050F_-125N1FN 1050 1,077 60 99 65 25-3/4 54 14 6, 8, 10 2370 10,887 143



401-207 OPTION FFLANGED NOZZLES @ 90

Submittal Data Information“MPT” Option F Flanged Vertical Multi-Purpose Tanks


401-207


MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E


GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050F_-125N1FN 50 20 43 25 111⁄2 18 127⁄8 2, 3, 4 310MPT0075F_-125N1FN 75 24 46 29 125⁄8 20 127⁄8 2, 3, 4 360MPT0100F_-125N1FN 100 24 61 29 125⁄8 20 127⁄8 2, 3, 4 400MPT0125F_-125N1FN 125 24 76 29 125⁄8 20 127⁄8 2, 3, 4 450MPT0150F_-125N1FN 150 30 60 35 141⁄4 24 131⁄2 2, 3, 4 640MPT0180F_-125N1FN 180 30 71 35 141⁄4 24 131⁄2 2, 3, 4 720MPT0200F_-125N1FN 200 30 78 35 141⁄4 24 131⁄2 2, 3, 4 760MPT0250F_-125N1FN 250 36 69 41 163⁄4 30 131⁄2 3, 4, 6 890MPT0300F_-125N1FN 300 36 82 41 163⁄4 30 131⁄2 3, 4, 6 1000MPT0350F_-125N1FN 350 36 94 41 163⁄4 30 131⁄2 3, 4, 6 1090MPT0400F_-125N1FN 400 48 65 53 195⁄8 44 127⁄8 4, 6, 8 1310MPT0450F_-125N1FN 450 48 72 53 195⁄8 44 127⁄8 4, 6, 8 1380MPT0500F_-125N1FN 500 48 79 53 195⁄8 44 127⁄8 4, 6, 8 1460MPT0700F_-125N1FN 700 48 100 53 195⁄8 44 127⁄8 4, 6, 8 1600MPT0850F_-125N1FN 850 54 99 59 231⁄2 50 131⁄8 4, 6, 8 2190MPT1050F_-125N1FN 1050 60 99 65 253⁄4 54 14 6, 8, 10 2500









as shown below:MPT0050F04-125N1FN


Job:

NOZZLE SIZESOFFERED


“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8


*

400-1050 50-350

“MPT” Option F Flanged Vertical Multi-Purpose Tanks Corner Model with 2 Internal Pall Ring Baskets


-8- -9-




MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA


MPT0050F_-125N1GN 50 55 20 43 30 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075F_-125N1GN 75 82 24 46 34 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100F_-125N1GN 100 111 24 61 34 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125F_-125N1GN 125 139 24 76 34 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150F_-125N1GN 150 168 30 60 40 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180F_-125N1GN 180 201 30 71 40 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200F_-125N1GN 200 222 30 78 40 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250F_-125N1GN 250 278 36 69 46 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300F_-125N1GN 300 334 36 82 46 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350F_-125N1GN 350 386 36 94 46 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400F_-125N1GN 400 443 48 65 58 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450F_-125N1GN 450 497 48 72 58 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500F_-125N1GN 500 551 48 79 58 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700F_-125N1GN 700 712 48 100 58 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850F_-125N1GN 850 873 54 99 64 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050F_-125N1GN 1050 1,077 60 99 70 25-3/4 54 14 6, 8, 10 2370 10,887 143



401-208 OPTION GFLANGED NOZZLES @ 180

Submittal Data Information“MPT” Option G Flanged Vertical Multi-Purpose Tanks

With 2 Internal Pall Ring Packs

401-208


MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E


GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050F_-125N1GN 50 20 43 30 111⁄2 18 127⁄8 2, 3, 4 360MPT0075F_-125N1GN 75 24 46 34 125⁄8 20 127⁄8 2, 3, 4 440MPT0100F_-125N1GN 100 24 61 34 125⁄8 20 127⁄8 2, 3, 4 480MPT0125F_-125N1GN 125 24 76 34 125⁄8 20 127⁄8 2, 3, 4 530MPT0150F_-125N1GN 150 30 60 40 141⁄4 24 131⁄2 2, 3, 4 780MPT0180F_-125N1GN 180 30 71 40 141⁄4 24 131⁄2 2, 3, 4 860MPT0200F_-125N1GN 200 30 78 40 141⁄4 24 131⁄2 2, 3, 4 900MPT0250F_-125N1GN 250 36 69 46 163⁄4 30 131⁄2 3, 4, 6 1030MPT0300F_-125N1GN 300 36 82 46 163⁄4 30 131⁄2 3, 4, 6 1140MPT0350F_-125N1GN 350 36 94 46 163⁄4 30 131⁄2 3, 4, 6 1230MPT0400F_-125N1GN 400 48 65 58 195⁄8 44 127⁄8 4, 6, 8 1540MPT0450F_-125N1GN 450 48 72 58 195⁄8 44 127⁄8 4, 6, 8 1610MPT0500F_-125N1GN 500 48 79 58 195⁄8 44 127⁄8 4, 6, 8 1690MPT0700F_-125N1GN 700 48 100 58 195⁄8 44 127⁄8 4, 6, 8 1830MPT0850F_-125N1GN 850 54 99 64 231⁄2 50 131⁄8 4, 6, 8 2510MPT1050F_-125N1GN 1050 60 99 70 253⁄4 54 14 6, 8, 10 2890









as shown below:MPT0050F04-125N1GN


Job:

NOZZLE SIZESOFFERED


“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8


*

400-1050 50-350

“MPT” Option G Flanged Vertical Multi-Purpose Tanks With 2 Internal Pall Ring Packs


-9-



MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA


MPT0050F_-125N1HN 50 55 20 43 25 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075F_-125N1HN 75 82 24 46 29 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100F_-125N1HN 100 111 24 61 29 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125F_-125N1HN 125 139 24 76 29 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150F_-125N1HN 150 168 30 60 35 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180F_-125N1HN 180 201 30 71 35 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200F_-125N1HN 200 222 30 78 35 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250F_-125N1HN 250 278 36 69 41 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300F_-125N1HN 300 334 36 82 41 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350F_-125N1HN 350 386 36 94 41 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400F_-125N1HN 400 443 48 65 53 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450F_-125N1HN 450 497 48 72 53 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500F_-125N1HN 500 551 48 79 53 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700F_-125N1HN 700 712 48 100 53 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850F_-125N1HN 850 873 54 99 59 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050F_-125N1HN 1050 1,077 60 99 65 25-3/4 54 14 6, 8, 10 2370 10,887 143



401-209 OPTION HFLANGED NOZZLES @ 90

Submittal Data Information“MPT” Option H Flanged Vertical Multi-Purpose Tanks

Corner Model with 2 Internal Pall Ring Packs

401-209


MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E


GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050F_-125N1HN 50 20 43 25 111⁄2 18 127⁄8 2, 3, 4 360MPT0075F_-125N1HN 75 24 46 29 125⁄8 20 127⁄8 2, 3, 4 440MPT0100F_-125N1HN 100 24 61 29 125⁄8 20 127⁄8 2, 3, 4 480MPT0125F_-125N1HN 125 24 76 29 125⁄8 20 127⁄8 2, 3, 4 530MPT0150F_-125N1HN 150 30 60 35 141⁄4 24 131⁄2 2, 3, 4 780MPT0180F_-125N1HN 180 30 71 35 141⁄4 24 131⁄2 2, 3, 4 860MPT0200F_-125N1HN 200 30 78 35 141⁄4 24 131⁄2 2, 3, 4 900MPT0250F_-125N1HN 250 36 69 41 163⁄4 30 131⁄2 3, 4, 6 1030MPT0300F_-125N1HN 300 36 82 41 163⁄4 30 131⁄2 3, 4, 6 1140MPT0350F_-125N1HN 350 36 94 41 163⁄4 30 131⁄2 3, 4, 6 1230MPT0400F_-125N1HN 400 48 65 53 195⁄8 44 127⁄8 4, 6, 8 1450MPT0450F_-125N1HN 450 48 72 53 195⁄8 44 127⁄8 4, 6, 8 1520MPT0500F_-125N1HN 500 48 79 53 195⁄8 44 127⁄8 4, 6, 8 1600MPT0700F_-125N1HN 700 48 100 53 195⁄8 44 127⁄8 4, 6, 8 1740MPT0850F_-125N1HN 850 54 99 59 231⁄2 50 131⁄8 4, 6, 8 2400MPT1050F_-125N1HN 1050 60 99 65 253⁄4 54 14 6, 8, 10 2730




o Other _________________ • Optional Connection Types o ‘T’ Female NPT Threaded 2” & 2 1/2” only 3/4" Available only on sizes, MPT0050 thru MPT0350 • NPT Temperature/Pressure Ports o (5) 3/4" Temperature/ Pressure ports:





as shown below:MPT0050F04-125N1HN

SUPERSEDES: June 9, 2016 EFFECTIVE: June 16 , 2016

Job:

NOZZLE SIZESOFFERED


“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8


*

400-1050 50-350

"MPT” Option H Flanged Vertical Multi-Purpose Tanks Corner Model with 2 Internal Pall Ring Packs

* Inspection Openings(1) 2" NPTF Models 50 through 350

-10-




MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA


MPT0050G_-125N1AN 50 55 20 43 30 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075G_-125N1AN 75 82 24 46 34 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100G_-125N1AN 100 111 24 61 34 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125G_-125N1AN 125 139 24 76 34 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150G_-125N1AN 150 168 30 60 40 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180G_-125N1AN 180 201 30 71 40 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200G_-125N1AN 200 222 30 78 40 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250G_-125N1AN 250 278 36 69 46 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300G_-125N1AN 300 334 36 82 46 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350G_-125N1AN 350 386 36 94 46 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400G_-125N1AN 400 443 48 65 58 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450G_-125N1AN 450 497 48 72 58 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500G_-125N1AN 500 551 48 79 58 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700G_-125N1AN 700 712 48 100 58 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850G_-125N1AN 850 873 54 99 64 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050G_-125N1AN 1050 1,077 60 99 70 25-3/4 54 14 6, 8, 10 2370 10,887 143



SPECIFICATIONS• Designed and constructed per ASME Code Section VIII, Division 1.• Construction: Carbon Steel with exterior red oxide primer finish• Standard Design Pressure and Temperature: 125 psi @ 240°F• Flanged inlet and outlet System Connections (standard sizes shown)• Registered with the National Board of Pressure Vessel Manufacturers• Integral Air Vent (Suitable for water, max. 50% glycol) • Factory installed 2" Blow Down Valve• Brass Flushing Cock• U-1A Data Report• (1) 2” NPT Inspection Opening – MPT0050 thru MPT0350 • (2) 4”X6” Inspection Handholes – MPT0400 thru MPT1050• (1) 3/4" Temperature/ Pressure port on shellOPTIONS (Consult Factory)• Optional materials of construction• Higher design pressures and temperatures• Optional System Connection sizes available• Thermal insulation






Submittal Data Information“MPT” Option A Grooved Vertical Multi-Purpose Tanks

401-195


MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E


GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050G_-125N1AN 50 20 43 30 111⁄2 18 127⁄8 2, 3, 4 270MPT0075G_-125N1AN 75 24 46 34 125⁄8 20 127⁄8 2, 3, 4 320MPT0100G_-125N1AN 100 24 61 34 125⁄8 20 127⁄8 2, 3, 4 360MPT0125G_-125N1AN 125 24 76 34 125⁄8 20 127⁄8 2, 3, 4 410MPT0150G_-125N1AN 150 30 60 40 141⁄4 24 131⁄2 2, 3, 4 600MPT0180G_-125N1AN 180 30 71 40 141⁄4 24 131⁄2 2, 3, 4 680MPT0200G_-125N1AN 200 30 78 40 141⁄4 24 131⁄2 2, 3, 4 720MPT0250G_-125N1AN 250 36 69 46 163⁄4 30 131⁄2 3, 4, 6 830MPT0300G_-125N1AN 300 36 82 46 163⁄4 30 131⁄2 3, 4, 6 940MPT0350G_-125N1AN 350 36 94 46 163⁄4 30 131⁄2 3, 4, 6 1030MPT0400G_-125N1AN 400 48 65 58 195⁄8 44 127⁄8 4, 6, 8 1230MPT0450G_-125N1AN 450 48 72 58 195⁄8 44 127⁄8 4, 6, 8 1300MPT0500G_-125N1AN 500 48 79 58 195⁄8 44 127⁄8 4, 6, 8 1380MPT0700G_-125N1AN 700 48 100 58 195⁄8 44 127⁄8 4, 6, 8 1520MPT0850G_-125N1AN 850 54 99 64 231⁄2 50 131⁄8 4, 6, 8 2110MPT1050G_-125N1AN 1050 60 99 70 253⁄4 54 14 6, 8, 10 2370




as shown below:MPT0050G04-125N1AN


401-195 OPTION AGROOVED NOZZLES @ 180

Job:

“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8

NOZZLE SIZESOFFERED



*

400-1050 50-350

“MPT” Option A Grooved Vertical Multi-Purpose Tanks


-11-



MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA


MPT0050G_-125N1BN 50 55 20 43 25 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075G_-125N1BN 75 82 24 46 29 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100G_-125N1BN 100 111 24 61 29 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125G_-125N1BN 125 139 24 76 29 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150G_-125N1BN 150 168 30 60 35 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180G_-125N1BN 180 201 30 71 35 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200G_-125N1BN 200 222 30 78 35 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250G_-125N1BN 250 278 36 69 41 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300G_-125N1BN 300 334 36 82 41 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350G_-125N1BN 350 386 36 94 41 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400G_-125N1BN 400 443 48 65 53 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450G_-125N1BN 450 497 48 72 53 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500G_-125N1BN 500 551 48 79 53 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700G_-125N1BN 700 712 48 100 53 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850G_-125N1BN 850 873 54 99 59 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050G_-125N1BN 1050 1,077 60 99 65 25-3/4 54 14 6, 8, 10 2370 10,887 143



401-221 OPTION BGROOVED NOZZLES @ 90

Submittal Data Information“MPT” Option B Grooved Vertical Multi-Purpose Tanks

Corner Model

401-221


MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E


GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050G_-125N1BN 50 20 43 25 111⁄2 18 127⁄8 2, 3, 4 270MPT0075G_-125N1BN 75 24 46 29 125⁄8 20 127⁄8 2, 3, 4 320MPT0100G_-125N1BN 100 24 61 29 125⁄8 20 127⁄8 2, 3, 4 360MPT0125G_-125N1BN 125 24 76 29 125⁄8 20 127⁄8 2, 3, 4 410MPT0150G_-125N1BN 150 30 60 35 141⁄4 24 131⁄2 2, 3, 4 600MPT0180G_-125N1BN 180 30 71 35 141⁄4 24 131⁄2 2, 3, 4 680MPT0200G_-125N1BN 200 30 78 35 141⁄4 24 131⁄2 2, 3, 4 720MPT0250G_-125N1BN 250 36 69 41 163⁄4 30 131⁄2 3, 4, 6 830MPT0300G_-125N1BN 300 36 82 41 163⁄4 30 131⁄2 3, 4, 6 940MPT0350G_-125N1BN 350 36 94 41 163⁄4 30 131⁄2 3, 4, 6 1030MPT0400G_-125N1BN 400 48 65 53 195⁄8 44 127⁄8 4, 6, 8 1230MPT0450G_-125N1BN 450 48 72 53 195⁄8 44 127⁄8 4, 6, 8 1300MPT0500G_-125N1BN 500 48 79 53 195⁄8 44 127⁄8 4, 6, 8 1380MPT0700G_-125N1BN 700 48 100 53 195⁄8 44 127⁄8 4, 6, 8 1520MPT0850G_-125N1BN 850 54 99 59 231⁄2 50 131⁄8 4, 6, 8 2110MPT1050G_-125N1BN 1050 60 99 65 253⁄4 54 14 6, 8, 10 2370


• Brass Flushing Cock • U-1A Data Report • (1) 2” NPT Inspection Opening – MPT0050 thru MPT0350 • (2) 4”X6” Inspection Handholes – MPT0400 thru MPT1050 • (1) 3/4" Temperature/ Pressure port on shell


o Other _____________________ • Optional Connection Types o ‘T’ Female NPT Threaded 2” & 2 1/2” only Available only on sizes, MPT0050 thru MPT0350 • 3/4" NPT Temperature/Pressure Ports


• o Optional Anchor Clips • o 150 PSI Working Pressure




as shown below:MPT0050G04-125N1BN


Job:

“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8

NOZZLE SIZESOFFERED



*

400-1050 50-350

“MPT” Option B Grooved Vertical Multi-Purpose Tanks Corner Model


-12- -13-




MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA


MPT0050G_-125N1CN 50 55 20 43 30 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075G_-125N1CN 75 82 24 46 34 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100G_-125N1CN 100 111 24 61 34 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125G_-125N1CN 125 139 24 76 34 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150G_-125N1CN 150 168 30 60 40 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180G_-125N1CN 180 201 30 71 40 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200G_-125N1CN 200 222 30 78 40 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250G_-125N1CN 250 278 36 69 46 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300G_-125N1CN 300 334 36 82 46 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350G_-125N1CN 350 386 36 94 46 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400G_-125N1CN 400 443 48 65 58 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450G_-125N1CN 450 497 48 72 58 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500G_-125N1CN 500 551 48 79 58 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700G_-125N1CN 700 712 48 100 58 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850G_-125N1CN 850 873 54 99 64 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050G_-125N1CN 1050 1,077 60 99 70 25-3/4 54 14 6, 8, 10 2370 10,887 143



SPECIFICATIONS• Designed and constructed per ASME Code Section VIII, Division 1.• Construction: Carbon Steel with exterior red oxide primer finish• Standard Design Pressure and Temperature: 125 psi @ 240°F• Flanged inlet and outlet System Connections (standard sizes shown)• Registered with the National Board of Pressure Vessel Manufacturers• Integral Air Vent (Suitable for water, max. 50% glycol) • Factory installed 2" Blow Down Valve• Brass Flushing Cock• 304 stainless steel coalescence pall rings• U-1A Data Report• (1) 2” NPT Inspection Opening – MPT0050 thru MPT0350 • (2) 4”X6” Inspection Handholes – MPT0400 thru MPT1050• (1) 3/4" Temperature/ Pressure port on shellOPTIONS (Consult Factory)• Optional materials of construction• Higher design pressures and temperatures• Optional System Connection sizes available• Thermal insulation






Submittal Data Information“MPT” Option C Grooved Vertical Multi-Purpose Tanks


401-210


MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E


GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050G_-125N1CN 50 20 43 25 111⁄2 18 127⁄8 2, 3, 4 310MPT0075G_-125N1CN 75 24 46 29 125⁄8 20 127⁄8 2, 3, 4 360MPT0100G_-125N1CN 100 24 61 29 125⁄8 20 127⁄8 2, 3, 4 400MPT0125G_-125N1CN 125 24 76 29 125⁄8 20 127⁄8 2, 3, 4 450MPT0150G_-125N1CN 150 30 60 35 141⁄4 24 131⁄2 2, 3, 4 640MPT0180G_-125N1CN 180 30 71 35 141⁄4 24 131⁄2 2, 3, 4 720MPT0200G_-125N1CN 200 30 78 35 141⁄4 24 131⁄2 2, 3, 4 760MPT0250G_-125N1CN 250 36 69 41 163⁄4 30 131⁄2 3, 4, 6 890MPT0300G_-125N1CN 300 36 82 41 163⁄4 30 131⁄2 3, 4, 6 1000MPT0350G_-125N1CN 350 36 94 41 163⁄4 30 131⁄2 3, 4, 6 1090MPT0400G_-125N1CN 400 48 65 53 195⁄8 44 127⁄8 4, 6, 8 1310MPT0450G_-125N1CN 450 48 72 53 195⁄8 44 127⁄8 4, 6, 8 1380MPT0500G_-125N1CN 500 48 79 53 195⁄8 44 127⁄8 4, 6, 8 1460MPT0700G_-125N1CN 700 48 100 53 195⁄8 44 127⁄8 4, 6, 8 1600MPT0850G_-125N1CN 850 54 99 59 231⁄2 50 131⁄8 4, 6, 8 2190MPT1050G_-125N1CN 1050 60 99 65 253⁄4 54 14 6, 8, 10 2500




as shown below:MPT0050G04-125N1CN


GROOVED

GROOVED

Job:

“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8

NOZZLE SIZESOFFERED



*

400-1050 50-350

“MPT” Option C Grooved Vertical Multi-Purpose Tanks With 2 Internal Pall Ring Baskets


-13-



MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA


MPT0050G_-125N1DN 50 55 20 43 30 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075G_-125N1DN 75 82 24 46 34 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100G_-125N1DN 100 111 24 61 34 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125G_-125N1DN 125 139 24 76 34 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150G_-125N1DN 150 168 30 60 40 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180G_-125N1DN 180 201 30 71 40 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200G_-125N1DN 200 222 30 78 40 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250G_-125N1DN 250 278 36 69 46 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300G_-125N1DN 300 334 36 82 46 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350G_-125N1DN 350 386 36 94 46 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400G_-125N1DN 400 443 48 65 58 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450G_-125N1DN 450 497 48 72 58 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500G_-125N1DN 500 551 48 79 58 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700G_-125N1DN 700 712 48 100 58 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850G_-125N1DN 850 873 54 99 64 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050G_-125N1DN 1050 1,077 60 99 70 25-3/4 54 14 6, 8, 10 2370 10,887 143



401-211 OPTION DGROOVED NOZZLES @ 180

Submittal Data Information“MPT” Option D Grooved Vertical Multi-Purpose Tanks


401-211


MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E


GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050G_-125N1DN 50 20 43 30 111⁄2 18 127⁄8 2, 3, 4 310MPT0075G_-125N1DN 75 24 46 34 125⁄8 20 127⁄8 2, 3, 4 360MPT0100G_-125N1DN 100 24 61 34 125⁄8 20 127⁄8 2, 3, 4 400MPT0125G_-125N1DN 125 24 76 34 125⁄8 20 127⁄8 2, 3, 4 450MPT0150G_-125N1DN 150 30 60 40 141⁄4 24 131⁄2 2, 3, 4 640MPT0180G_-125N1DN 180 30 71 40 141⁄4 24 131⁄2 2, 3, 4 720MPT0200G_-125N1DN 200 30 78 40 141⁄4 24 131⁄2 2, 3, 4 760MPT0250G_-125N1DN 250 36 69 46 163⁄4 30 131⁄2 3, 4, 6 890MPT0300G_-125N1DN 300 36 82 46 163⁄4 30 131⁄2 3, 4, 6 1000MPT0350G_-125N1DN 350 36 94 46 163⁄4 30 131⁄2 3, 4, 6 1090MPT0400G_-125N1DN 400 48 65 58 195⁄8 44 127⁄8 4, 6, 8 1310MPT0450G_-125N1DN 450 48 72 58 195⁄8 44 127⁄8 4, 6, 8 1380MPT0500G_-125N1DN 500 48 79 58 195⁄8 44 127⁄8 4, 6, 8 1460MPT0700G_-125N1DN 700 48 100 58 195⁄8 44 127⁄8 4, 6, 8 1600MPT0850G_-125N1DN 850 54 99 64 231⁄2 50 131⁄8 4, 6, 8 2190MPT1050G_-125N1DN 1050 60 99 70 253⁄4 54 14 6, 8, 10 2500




as shown below:MPT0050G04-125N1DN

“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8


Job:

SPECIFICATIONS • Designed and constructed per ASME Code Section VIII, Division 1. • Construction: Carbon Steel with exterior red oxide primer finish • Standard Design Pressure and Temperature: 125 psi @ 240°F • Flanged inlet and outlet System Connections (standard sizes shown) • Registered with the National Board of -Pressure Vessel Manufacturers • Integral Air Vent (Suitable for water, max. 50% glycol) • Factory installed 2" Blow Down Valve


• U-1A Data Report • (1) 2” NPT Inspection Opening – MPT0050 thru MPT0350 • (2) 4”X6” Inspection Handholes – MPT0400 thru MPT1050 • (1) 3/4" Temperature/ Pressure port on shell





NOZZLE SIZESOFFERED



*

400-1050 50-350

“MPT” Option D Grooved Vertical Multi-Purpose Tanks With 2 Internal Pall Ring Baskets


-14-




MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA


MPT0050G_-125N1EN 50 55 20 43 25 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075G_-125N1EN 75 82 24 46 29 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100G_-125N1EN 100 111 24 61 29 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125G_-125N1EN 125 139 24 76 29 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150G_-125N1EN 150 168 30 60 35 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180G_-125N1EN 180 201 30 71 35 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200G_-125N1EN 200 222 30 78 35 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250G_-125N1EN 250 278 36 69 41 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300G_-125N1EN 300 334 36 82 41 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350G_-125N1EN 350 386 36 94 41 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400G_-125N1EN 400 443 48 65 53 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450G_-125N1EN 450 497 48 72 53 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500G_-125N1EN 500 551 48 79 53 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700G_-125N1EN 700 712 48 100 53 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850G_-125N1EN 850 873 54 99 59 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050G_-125N1EN 1050 1,077 60 99 65 25-3/4 54 14 6, 8, 10 2370 10,887 143



401-212 OPTION EGROOVED NOZZLES @ 90

Submittal Data Information“MPT” Option E Grooved Vertical Multi-Purpose Tanks


401-212


MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E


GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050G_-125N1EN 50 20 43 25 111⁄2 18 127⁄8 2, 3, 4 310MPT0075G_-125N1EN 75 24 46 29 125⁄8 20 127⁄8 2, 3, 4 360MPT0100G_-125N1EN 100 24 61 29 125⁄8 20 127⁄8 2, 3, 4 400MPT0125G_-125N1EN 125 24 76 29 125⁄8 20 127⁄8 2, 3, 4 450MPT0150G_-125N1EN 150 30 60 35 141⁄4 24 131⁄2 2, 3, 4 640MPT0180G_-125N1EN 180 30 71 35 141⁄4 24 131⁄2 2, 3, 4 720MPT0200G_-125N1EN 200 30 78 35 141⁄4 24 131⁄2 2, 3, 4 760MPT0250G_-125N1EN 250 36 69 41 163⁄4 30 131⁄2 3, 4, 6 890MPT0300G_-125N1EN 300 36 82 41 163⁄4 30 131⁄2 3, 4, 6 1000MPT0350G_-125N1EN 350 36 94 41 163⁄4 30 131⁄2 3, 4, 6 1090MPT0400G_-125N1EN 400 48 65 53 195⁄8 44 127⁄8 4, 6, 8 1310MPT0450G_-125N1EN 450 48 72 53 195⁄8 44 127⁄8 4, 6, 8 1380MPT0500G_-125N1EN 500 48 79 53 195⁄8 44 127⁄8 4, 6, 8 1460MPT0700G_-125N1EN 700 48 100 53 195⁄8 44 127⁄8 4, 6, 8 1600MPT0850G_-125N1EN 850 54 99 59 231⁄2 50 131⁄8 4, 6, 8 2190MPT1050G_-125N1EN 1050 60 99 65 253⁄4 54 14 6, 8, 10 2500










as shown below:MPT0050G04-125N1EN


Job:

“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8

NOZZLE SIZESOFFERED



*

400-1050 50-350

“MPT” Option E Grooved Vertical Multi-Purpose Tanks Corner Model with 2 Internal Pall Ring Baskets


-15-

Refer to standard submittal as this sheet is a “Quick Reference Guide” only.Go to www.Taco.Comfort.com > Products > Multi-Purpose Tanks > Submittals


MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA


MPT0050G_-125N1FN 50 55 20 43 25 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075G_-125N1FN 75 82 24 46 29 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100G_-125N1FN 100 111 24 61 29 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125G_-125N1FN 125 139 24 76 29 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150G_-125N1FN 150 168 30 60 35 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180G_-125N1FN 180 201 30 71 35 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200G_-125N1FN 200 222 30 78 35 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250G_-125N1FN 250 278 36 69 41 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300G_-125N1FN 300 334 36 82 41 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350G_-125N1FN 350 386 36 94 41 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400G_-125N1FN 400 443 48 65 53 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450G_-125N1FN 450 497 48 72 53 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500G_-125N1FN 500 551 48 79 53 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700G_-125N1FN 700 712 48 100 53 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850G_-125N1FN 850 873 54 99 59 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050G_-125N1FN 1050 1,077 60 99 65 25-3/4 54 14 6, 8, 10 2370 10,887 143



401-213 OPTION FGROOVED NOZZLES @ 90

Submittal Data Information“MPT” Option F Grooved Vertical Multi-Purpose Tanks


401-213


MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E


GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050G_-125N1FN 50 20 43 25 111⁄2 18 127⁄8 2, 3, 4 310MPT0075G_-125N1FN 75 24 46 29 125⁄8 20 127⁄8 2, 3, 4 360MPT0100G_-125N1FN 100 24 61 29 125⁄8 20 127⁄8 2, 3, 4 400MPT0125G_-125N1FN 125 24 76 29 125⁄8 20 127⁄8 2, 3, 4 450MPT0150G_-125N1FN 150 30 60 35 141⁄4 24 131⁄2 2, 3, 4 640MPT0180G_-125N1FN 180 30 71 35 141⁄4 24 131⁄2 2, 3, 4 720MPT0200G_-125N1FN 200 30 78 35 141⁄4 24 131⁄2 2, 3, 4 760MPT0250G_-125N1FN 250 36 69 41 163⁄4 30 131⁄2 3, 4, 6 890MPT0300G_-125N1FN 300 36 82 41 163⁄4 30 131⁄2 3, 4, 6 1000MPT0350G_-125N1FN 350 36 94 41 163⁄4 30 131⁄2 3, 4, 6 1090MPT0400G_-125N1FN 400 48 65 53 195⁄8 44 127⁄8 4, 6, 8 1310MPT0450G_-125N1FN 450 48 72 53 195⁄8 44 127⁄8 4, 6, 8 1380MPT0500G_-125N1FN 500 48 79 53 195⁄8 44 127⁄8 4, 6, 8 1460MPT0700G_-125N1FN 700 48 100 53 195⁄8 44 127⁄8 4, 6, 8 1600MPT0850G_-125N1FN 850 54 99 59 231⁄2 50 131⁄8 4, 6, 8 2190MPT1050G_-125N1FN 1050 60 99 65 253⁄4 54 14 6, 8, 10 2500










as shown below:MPT0050G04-125N1FN


Job:

NOZZLE SIZESOFFERED


“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8


*

400-1050 50-350

“MPT” Option F Grooved Vertical Multi-Purpose Tanks Corner Model with 2 Internal Pall Ring Baskets


-16-


Refer to standard submittal as this sheet is a “Quick Reference Guide” only.Go to www.Taco.Comfort.com > Products > Multi-Purpose Tanks > Submittals


MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA


MPT0050G_-125N1GN 50 55 20 43 30 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075G_-125N1GN 75 82 24 46 34 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100G_-125N1GN 100 111 24 61 34 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125G_-125N1GN 125 139 24 76 34 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150G_-125N1GN 150 168 30 60 40 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180G_-125N1GN 180 201 30 71 40 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200G_-125N1GN 200 222 30 78 40 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250G_-125N1GN 250 278 36 69 46 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300G_-125N1GN 300 334 36 82 46 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350G_-125N1GN 350 386 36 94 46 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400G_-125N1GN 400 443 48 65 58 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450G_-125N1GN 450 497 48 72 58 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500G_-125N1GN 500 551 48 79 58 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700G_-125N1GN 700 712 48 100 58 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850G_-125N1GN 850 873 54 99 64 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050G_-125N1GN 1050 1,077 60 99 70 25-3/4 54 14 6, 8, 10 2370 10,887 143



401-214 OPTION GGROOVEDED NOZZLES @ 180

Submittal Data Information“MPT” Option G Grooved Vertical Multi-Purpose Tanks

With 2 Internal Pall Ring Packs

401-214


MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E


GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050G_-125N1GN 50 20 43 30 111⁄2 18 127⁄8 2, 3, 4 360MPT0075G_-125N1GN 75 24 46 34 125⁄8 20 127⁄8 2, 3, 4 440MPT0100G_-125N1GN 100 24 61 34 125⁄8 20 127⁄8 2, 3, 4 480MPT0125G_-125N1GN 125 24 76 34 125⁄8 20 127⁄8 2, 3, 4 530MPT0150G_-125N1GN 150 30 60 40 141⁄4 24 131⁄2 2, 3, 4 780MPT0180G_-125N1GN 180 30 71 40 141⁄4 24 131⁄2 2, 3, 4 860MPT0200G_-125N1GN 200 30 78 40 141⁄4 24 131⁄2 2, 3, 4 900MPT0250G_-125N1GN 250 36 69 46 163⁄4 30 131⁄2 3, 4, 6 1030MPT0300G_-125N1GN 300 36 82 46 163⁄4 30 131⁄2 3, 4, 6 1140MPT0350G_-125N1GN 350 36 94 46 163⁄4 30 131⁄2 3, 4, 6 1230MPT0400G_-125N1GN 400 48 65 58 195⁄8 44 127⁄8 4, 6, 8 1540MPT0450G_-125N1GN 450 48 72 58 195⁄8 44 127⁄8 4, 6, 8 1610MPT0500G_-125N1GN 500 48 79 58 195⁄8 44 127⁄8 4, 6, 8 1690MPT0700G_-125N1GN 700 48 100 58 195⁄8 44 127⁄8 4, 6, 8 1830MPT0850G_-125N1GN 850 54 99 64 231⁄2 50 131⁄8 4, 6, 8 2510MPT1050G_-125N1GN 1050 60 99 70 253⁄4 54 14 6, 8, 10 2890










as shown below:MPT0050G04-125N1GN


Job:

NOZZLE SIZESOFFERED


“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8


*

400-1050 50-350

“MPT” Option G Grooved Vertical Multi-Purpose Tanks With 2 Internal Pall Ring Packs


-17-



MODELNUMBER

TANKVOLUME

ACTUALVOLUME

ATANK

DIAMETER

BTANK

HEIGHT

C **FLANGESPREAD

DHEAD TOFLANGE

EBASE RING DIAMETER

FBASE RING AFF

GNOZZLE

SIZE

MAX.APPROX.

DRYWEIGHT

MAX. APPROX.

FLOODED WEIGHT

SURFACE AREA


MPT0050G_-125N1HN 50 55 20 43 25 11-1/2 18 12-7/8 2, 3, 4 270 607 21

MPT0075G_-125N1HN 75 82 24 46 29 12-5/8 20 12-7/8 2, 3, 4 320 866 27

MPT0100G_-125N1HN 100 111 24 61 29 12-5/8 20 12-7/8 2, 3, 4 360 1,114 34

MPT0125G_-125N1HN 125 139 24 76 29 12-5/8 20 12-7/8 2, 3, 4 410 1,373 42

MPT0150G_-125N1HN 150 168 30 60 35 14-1/4 24 13-1/2 2, 3, 4 600 1,761 43

MPT0180G_-125N1HN 180 201 30 71 35 14-1/4 24 13-1/2 2, 3, 4 680 2,091 50

MPT0200G_-125N1HN 200 222 30 78 35 14-1/4 24 13-1/2 2, 3, 4 720 2,298 55

MPT0250G_-125N1HN 250 278 36 69 41 16-3/4 30 13-1/2 3, 4, 6 830 2,795 59

MPT0300G_-125N1HN 300 334 36 82 41 16-3/4 30 13-1/2 3, 4, 6 940 3,322 69

MPT0350G_-125N1HN 350 386 36 94 41 16-3/4 30 13-1/2 3, 4, 6 1030 3,829 79

MPT0400G_-125N1HN 400 443 48 65 53 19-5/8 44 12-7/8 4, 6, 8 1230 4,346 80

MPT0450G_-125N1HN 450 497 48 72 53 19-5/8 44 12-7/8 4, 6, 8 1300 4,833 88

MPT0500G_-125N1HN 500 551 48 79 53 19-5/8 44 12-7/8 4, 6, 8 1380 5,330 95

MPT0700G_-125N1HN 700 712 48 100 53 19-5/8 44 12-7/8 4, 6, 8 1520 7,138 117

MPT0850G_-125N1HN 850 873 54 99 59 23-1/2 50 13-1/8 4, 6, 8 2110 8,969 127

MPT1050G_-125N1HN 1050 1,077 60 99 65 25-3/4 54 14 6, 8, 10 2370 10,887 143



401-215 OPTION HGROOVED NOZZLES @ 90

Submittal Data Information“MPT” Option H Grooved Vertical Multi-Purpose Tanks

Corner Model with 2 Internal Pall Ring Packs

401-215


MODELNUMBER

TANKVOLUME

ADIAMETER B C** D E


GAL. INCH INCH INCH INCH INCH INCH SIZE LBS.MPT0050G_-125N1HN 50 20 43 25 111⁄2 18 127⁄8 2, 3, 4 360MPT0075G_-125N1HN 75 24 46 29 125⁄8 20 127⁄8 2, 3, 4 440MPT0100G_-125N1HN 100 24 61 29 125⁄8 20 127⁄8 2, 3, 4 480MPT0125G_-125N1HN 125 24 76 29 125⁄8 20 127⁄8 2, 3, 4 530MPT0150G_-125N1HN 150 30 60 35 141⁄4 24 131⁄2 2, 3, 4 780MPT0180G_-125N1HN 180 30 71 35 141⁄4 24 131⁄2 2, 3, 4 860MPT0200G_-125N1HN 200 30 78 35 141⁄4 24 131⁄2 2, 3, 4 900MPT0250G_-125N1HN 250 36 69 41 163⁄4 30 131⁄2 3, 4, 6 1030MPT0300G_-125N1HN 300 36 82 41 163⁄4 30 131⁄2 3, 4, 6 1140MPT0350G_-125N1HN 350 36 94 41 163⁄4 30 131⁄2 3, 4, 6 1230MPT0400G_-125N1HN 400 48 65 53 195⁄8 44 127⁄8 4, 6, 8 1450MPT0450G_-125N1HN 450 48 72 53 195⁄8 44 127⁄8 4, 6, 8 1520MPT0500G_-125N1HN 500 48 79 53 195⁄8 44 127⁄8 4, 6, 8 1600MPT0700G_-125N1HN 700 48 100 53 195⁄8 44 127⁄8 4, 6, 8 1740MPT0850G_-125N1HN 850 54 99 59 231⁄2 50 131⁄8 4, 6, 8 2400MPT1050G_-125N1HN 1050 60 99 65 253⁄4 54 14 6, 8, 10 2730










as shown below:MPT0050G04-125N1HN


Job:

NOZZLE SIZESOFFERED


“C” Dim.Size Dia. 2” T 2-1/2” T50 20 23 3/8 23 5/8

75, 100, 125 24 27 3/8 27 5/8150, 180, 200 30 33 3/8 33 5/8250, 300, 350 36 39 3/8 39 5/8


*

400-1050 50-350

“MPT” Option H Grooved Vertical Multi-Purpose Tanks Corner Model with 2 Internal Pall Ring Packs


-18-

Taco Multi-Purpose Tank Coding Matrix without BafflesPosition 1, 2,3 4, 5, 6,7 8 9, 10 11 12, 13, 14 15 16 17 18

Description Multi-Purpose Tanks Gallons Connection

TypeNozzle

Size Design Temp. °F

Designpsi Insulation Sensing

Ports Option Options

Part Number MPT 0050 F 04 - 125 N 1 A N

1, 2, 3Multi-Purpose MPT Multi-Purpose, Vert., Base Ring DesignCarbon SteelConstruction CT Custom Tank*

8

Connection F Flanged

G Grooved

T Threaded, FNPT 2” & 2-1/2” ONLY

9 Custom Type Request*

4, 5, 6, 7

Capacity Gallons 0050 50 Gallons

0075 75 Gallons

0100 100 Gallons

0125 125 Gallons

0150 150 Gallons

0180 180 Gallons

0200 200 Gallons

0250 250 Gallons

0300 300 Gallons

0350 350 Gallons

0400 400 Gallons

0450 450 Gallons

0500 500 Gallons

0700 700 Gallons

0850 850 Gallons

1050 1050 Gallons

--- Custom Gal. Request*

9, 10Nozzle Size 02 2” ANSI

03 3” ANSI04 4” ANSI06 6” ANSI08 8” ANSI10 10” ANSI--- Custom Size Request*

11Design Temp. ˚F -- 240˚F, Standard, MPT Series

--- Custom Temp Request*

12, 13, 14Design Pressure 125 psi

150 psi--- Custom Pressure Request*

15InsulationOptions N 0 No Insulation required

H R-3.0 1” Silicon/Fiberglass, Hot Water Insulation, For Interior use

J R-6.2 2” Silicon/Fiberglass, Hot Water Insulation, For Interior use

C R-2.1 1/2” Armaflex, Chilled Water Insulation, For Interior use

E R-3.1 3/4” Armaflex, Chilled Water Insulation, For Interior use

D R-4.2 1” Armaflex, Chilled Water Insulation, For Interior use

F R-6.0 1-1/2” Armaflex, Chilled Water Insulation, For Interior use

G R-8.0 2” Armaflex, Chilled Water Insulation, For Interior use

K R-2.1 1/2” Armaflex w/ Alum. Jacket, Chilled Water Insulation,For Exterior use

L R-3.1 3/4” Armaflex w/ Alum. Jacket, Chilled Water Insulation,For Exterior use

M R-4.2 1” Armaflex w/ Alum. Jacket, Chilled Water Insulation, For Exterior use

P R-6.0 1-1/2” Armaflex w/ Alum. Jacket, Chilled Water Insulation,For Exterior use

R R-8.0 2” Armaflex w/ Alum. Jacket, Chilled Water Insulation, For Exterior use

S R-12.3 2” Polyisocyanurate with Alum. Jacket, CW & HW Insulation, For Interior & Exterior use

T R-20.8 3” Polyisocyanurate with Alum. Jacket, CW & HW Insulation,For Interior & Exterior use

9 Custom Insulation Request*

163/4” Sensing Port

1 3/4” NPTF Port on Shell (1) Standard as shown on submittal

5 Optional 3/4” NPTF Ports one on each nozzle (4)

9 Custom Port Request*

17Option Nozzle Positions and pall rings

A “MPT” Option A Model 180˚ (No Pall Rings)

B “MPT” Option B Corner 90˚ (No Pall Rings)

C “MPT” Option C 180˚ w/ 2 Internal Pall Ring Baskets

D “MPT” Option D 180˚ w/ 2 Internal Pall Ring Baskets

E “MPT” Option E Corner Model 90˚ w/ 2 Internal Pall Ring Baskets

F “MPT” Option F Corner Model 90˚ w/ 2 Internal Pall Ring Baskets

G “MPT” Option G Model 180˚ w/ 2 Internal Pall Ring Packs

H “MPT” Option H Corner Model 90˚ w/ 2 Internal Pall Ring Packs

9 Custom Port Request*

18Options N None

A Anchor Clips (4)9 Custom Port Request

PLEASE NOTE: Any “Custom Request” a Part Number to this Matrix, Sketch and Description MUST BE Sent with the Request.

Taco Inc., 1160 Cranston Street, Cranston, RI 02920 / (401) 942-8000 / Fax (401) 942-2360 Taco (Canada) Ltd., 8450 Lawson Road, Unit #3, Milton, Ontario L9T 0J8 / (905) 564-9422 / Fax (905) 564-9436

www.TacoComfort.com

multi-purpose tanks - taco comfort solutions · multi-purpose tanks ... • designed and...

Documents