CAPTION

2860 Memphis Street Phila., PA 19134 Phone 215.426.5300 Fax 215.426.6897www.quakercityauction.com

QUAKER CITY AUCTIONEERS’ LIVE & ONLINE MULTI-MILLION DOLLAR VINYL WINDOW MANUFACTURER AUCTION

2 - DAYS 2 - LOCATIONSTUESDAY, NOVEMBER 13th – 1 YEAR OLD FACILITY

$2,000,000+ REPLACEMENT COST 4914 Lambert Pl., Dublin, VA 24084

THURSDAY, NOVEMBER 15th – 180,000 S.F. Plant 767 Sans Souci Parkway, Wilkes-Barre, PA 18706

Location 1

Location 2

2011 2011

2003

2006

1 of 2 STURTZ SMI Linear Pro VHC- Cut & Fab Centers 1 of 2 STURTZ SMI Linear Pro V-Cut & Fab Centers

BESTEN T.A.P.E. AT Insulating Glass LineSTURTZ SMI – SCC-104F Automated Flexfab Sawing & Fabrication Center

2

● WELDERS ●

2010 STURTZ SMI-HSM-30/25POS Horizontal Four Point Frame Welder S/N 110606, Multi-Tiered Standard Welding Range: 136” x 109” w/out Tooling, 128”x100” w/2” Nail Fin, 15-1/2”x 15-1/2” Min (auto unload-w/Tooling), 12”x12” Min. manual unload w/Tooling), Set Spring Loaded Dbl. Stacked Weld Fixture for Dbl. or Sgl. Hung w/Slope Sill Component, ¼ Set Spring Loaded Dbl. Stacked Weld Fixture for Hor. Slider & Picture Window, Notched Welding Capability, Automatic Unload Assist, Bar Code Scanner, network Cabling & Control Card, 30/30 Static Buffer & Unload Table (Item Codes – PC-MS, MT-H, DT-O, DT-PE, WP4-MT-F, NM4-ST-F, MT-U, BCS, 30/30 BUFF)

(2) 2011 STURTZ SMI-HSM-20/19 CDS Horizontal Four Point Sash Welders, S/N’s 130-048 (Left Fixed Bridge) & 130-047 (Right Fixed Bridge), Multi-Tiered, Standard Welding Range: 72”x72” Max, 11-1/2”x11-1/2” Min (manual unload), 12-1/2”x12-1/2” Min (auto unload), (2) Set Spring Loaded Dbl. Stacked Weld Fixtures w/Unequal Offset for Welding Dbl. Hung Sash Profiles, Set Spring Loaded Dbl. Stacked Weld Fixtures w/No Offset for Welding Hor. Slider Sash, (2) Sets Spring Loaded Dbl. Stacked Weld Fixtures for Equal Offset for Welding Dbl. Hung Sash Profiles, Set Spring Loaded Dbl. Stacked Weld Fixtures w/No Offset for Welding Hor. Slider Sash, Tooling to Accept Weather-stripping (Wool Pile), Teflon Roller System – 4 heads, Offset Welding Capability, Sgl. Tiered Unload System w/3rd Unload Position, Bar Code Scanner (Item Codes – PC-MS, ST-U, DET-PE, DT-O, WF-4-MT-F/S, TRS, OSW-MT, BCS 2019 BUFF

● CORNER CLEANERS ●

2011 STURTZ SMI-CNC-2K-30F Automatic Twin Head Frame Corner Cleaner, S/N 40158, Min. Welded Square For Twin Head Operation, 16-1/2”, Max Welded Unit 120”W, Min Profile Height 1”, Max Profile Height 6”, Self-Cleaning Belt System, PC Monitor System, Movable Head Positioning Upgrade, Bar Code Scanner (Item Codes – 2K-SCBS, PC-MS, 2-K-PUMH, BCS)

(2) 2010 STURTZ CNC-2K-18 Twin Head Sash Corner Cleaners, S/N’s 40140 & 40151, Min Welded Square

EQUIPMENT NEW in 2010-2011 ● AUTOMATED CUTTING & FABRICATION SYSTEMS ●

2011 STURTZ SMI Linear Pro VHC-Cut Thru Feed Dbl. Miter Saw Automated Cutting & Fabrication System, S/N 25-227, Frame Saw, Left-to-Right Orientation, (2) 20” Blades, Min. Cut Length 6”, Max Lineal Length 21’, 2 Sets 3-Pocket Table Top tooling for Dbl. hung. Horizontal Slider & Picture Window Frame Units, Custom Nylon In-feed Rollers, 3-Pocket Lineal Pre-loader, Feeder Upgrade w/3 Grippers, FABIII Integrated Tool System, 20 Fabrication Tools (includes Shifters, Drills, Dimple Stations & Router Stations), Overhead Straight Cut 90◦ Cutting Option, Label printer Interface, Optimization/Rest Piece Mgmt. Software, Hor. & Vert. Incline Scrap Conveyor System (Item Codes – ONS, PBPO, CTT-3, FPS, IFR, SD-LP, FAB-3, CFT, OSCN, SCS, DCS, BCS, Optimize, RPM)

(Please Note: There is an identical unit, S/N 25-228 in Wilkes Barre – Right-to-Left Orientation)

(2) 2011 STURTZ SMI Linear Pro V-Cut Thru Feed Dbl. Miter Saw Automated Cutting & Fabrication Systems, S/N’s 25-229- Left-to-Right Orientation & 25-230- Right-to-Left Orientation), Sash Saw, (2) 22” Blades, Add’l Table Top Guides & Clamping for added sash model, Feeding & Positioning System Upgrade w/2nd Linear Feeder w/ 2 Add’l. Grippers, Custom Nylon In-Feed Rollers, Dual Lineal Pre-Loader, FAB I Integrated Tooling System, 21 Fabrication Tools (includes Shifters, Drills, Dimple Stations, Router Stations), Label Printer Interface & Bar Code Scanner, Optimization/Rest Piece Mgmt. Software, Hor. & Vert. Incline Scrap Conveyor System, (Item Codes – FPS-LINI, FPD-LIN2, SD-LP, IFR, CTT-4, IFS-1, CFT, SCS, BCS, Optimize, RPM)

STURTZ SMI-JN300 Compound Jamb Notch Saw

12”, Min Profile Height 1.4”, Overhead Vertical Drill, Auto Tilt Latch Routing, Movable Head Positioning Upgrade, Lower Scarf Knife, Lower Vertical Knife, Bar Code Scanner (Item Codes: 2K-VIR-O, 2K-18-TLR, 2K-18-PUMH, BCS)

● SAWS ●

2007 STURTZ SMI-JN300 Compound Jamb Notch Saw, S/N 25132, 12” Blade, 2 1.5HP Motors, Will Notch Sill End of Jambs, Chip Pan.

(2) 2008 STURTZ SMI-TA350M Sgl. Head Upcut Saws, S/N’s 28953 & 28952, 13-3/4” Blade, 3 HP, Clamp Tips, Hydro Pneumatic Feed System, 10’ Roller Conveyor, Spray Mist for Aluminum (on one saw), LA3000A (AMS 300) Automatic Length Stop (Electronic End Stop), PC Monitor System w/JETTER JC241 PLC

(2) 2008 STURTZ TA350M Sgl. Head Upcut Saw, S/N’s 28954 & 27849 (2007), 13-3/4” Blade, 3 HP, Clamp Tips, Hydro Pneumatic Feed System, 10’ Roller Conveyor w/TIGER STOP 10’ Electronic Stop w/ SAMPSON MN Twin 12” Mitre Saw, 1-1/2HP w/TIGER STOP Electronic Stop w/Control

(4) HITATCHI C10FCEZ 10” Compound Mitre Saws

PORTER-CABLE PCB220TS Port. Table Saw, S/N 058137

Location 1: 4914 Lambert Place, Dublin, VA 24084 Inspection: Monday, November 12th, 8:00 am to 4:00 pm

2007

STURTZ SMI-HSM-30/25 PDS 4 - Point Frame Welder

2010STURTZ SMI-CNC-2K-30-F Auto Twin Head Frame Corner Cleaner

2011

3

1 of 2 STURTZ SMI-CNC-2K-18 Twin Head Sash Corner Cleaners

2011

KALAMAZOO 860FA12-SMD-DW Fully Automatic Horizontal Winder

● MISC. WINDOW EQUIPMENT •DAILEY Automation X-Y CNC Automatic Silicone Application System, Travels – x-60”, y-94”, z-3-=1/2”, PC Control, GRACO HD SENATOR Air Pump, mdl. 217-5402010 STURTZ F106 End Mill, S/N 100100302(3) SUPERIOR Jamb, Head & Sill Air PunchesAIR TAC Air Corner NotcherPDDI Air Punch30’ Dbl. Sided Glazing Table w/Roller Track & Inspection Station21’ Dbl. Sided Balance Assembly Table(2) Assembly Tables w/Corner Fixtures40’ & 30’ Final Assembly Racks w/Roller Tracks(2) Screening Tables w/Magnetic Tops & Twin 4-Position Rotary Screen Feeders

● PACKAGING ●2011 KALAMAZOO 860FA12-SHD-DW Fully Automatic Horizontal Winder S/N 11030, Spring Loaded Product Hold-downs, Hyd. Input Lift Conveyor, Input Conveyors, Output Conveyor, Max Width 61”2001 KALAMAZOO 939-M7 HS Window Wrapper S/N 010502, 60” Dia. Rotary Table, 100” Max Width Wrap, 84” Max Wrap Height, Removable Window Holding Fixtures on TableFATOM Full Web Port. Pallet WrapperSHANKLIN S24B L-Bar Wrapper Sealer, S/N 589108 w/T-7 XL Shrink Tunnel, S/N T-892563M- Matic 700r Random Case Sealer w/ACCUGLIDE Belt Conveyor

● MATERIAL HANDLING ●CATERPILLAR C5000-LP Cushion Tire Fork Lift, S/N AT9011898, 4,750 lbs Cap., Tpl. Mast to 187”, Side Shifter, 4,958 HrsCROWN RD 5020-30 Standup Electric Reach Fork Lift, S/N 1A214091, 3000 lbs. Cap., Lift to 270” 2,369 Hrs w/Industrial Battery ChargerGROVE SM3150E Electric Scissor Lift, 31’ Working Height, Fold-out PlatformBALLYMORE Man Lift Cage w/Casters & Fork Pockets, 1000 lbs. Cap.

CATERPILLAR C-5000 L.P. Cushion Tire Fork Lift

(4) Glass Harp Racks ● (5) Angle Iron A-Frame Carts ● (29) 5’ 3-Sided Iron Carts ● (6) 8’ Iron Flat Trucks ● (12) Multi-Tier ● (6) STURTZ Parts Carts

● SUPPORT ●

(4) DELTA 50-764 Port. Dust Collectors (never used), 5HP

PIQUA Series 30 Vertical Downstroke Baler, 30”x60” Bale Size

(7) Sections Pallet Racking w/UARCO Dividers 98”x30”x144”

(20) Sections SCOTLAND LD Racking

(2) Hydraulic Pallet Jacks, 5,500 lbs. Cap.

(16) 40”x48”x48” Collapsible Wire Baskets

SHOP EQUIPMENT – MILLER Passport 180 Port. Suitcase Mig Welder S/N LE365573 (2005) w/Cart ● PALMGREN 10” Bench Drill Press, 5-Spd ● ALVA ALLEN BT-5 OBI Bench Punch Press ● DeWALT DW758 8” DeGrinder ● PORTER-CABLE PCB6600DP Drill Press, 16” ● MILWAUKEE Power Tools ● Maintenance Tools ● Hardware & Bins ● Electrical Parts ● Laser Printers ● PC’s

● INVENTORY ●

Finished Windows ● 5,000 lbs. Aluminum Screen Frame Extrusion ● BETERVUE Insect Screen Rolls ● BSI Spring & Coil Balances ● Keepers, Locks, Latches & Stops ● LAMATEK Ether Wrap ● ULTRAFAB Wool Pile ● Vinyl Stripping ● Hardware ● 80 Rolls Ultra Film ● Clay Coat Packing Corners ● Foam Insulating Insert Strips ● Spline ● Pivot Bars ● Sash Seal ● TREM GLAZE S500 Silicone ● Balance Shoes ● Gaskets ● Wood Window Jamb ● Foam Packing Boots ● Corrugated Packing

QUAKER CITY AUCTIONEERS’ LIVE & ONLINESALE: TUESDAY, NOVEMBER 13th at 10:00 am EST

STURTZ SMI-HSM-20/19 CDS 4-Point Sash Welder

2011

2010

2008

1 of 2 STURTZ SMI-TA350 Sgl. Head Upcut Saw w/ AMS 300 Auto Length Stop

4

Location 2: 767 Sans Souci Pkwy, Wilkes-Barre, PA 18706 Inspection: Wednesday, November 14th, 9 am to 4 pm

● AUTOMATED CUTTING & FABRICATION SYSTEMS ●

2011 STURTZ SMI-Linear Pro VHC-Cut Automated Cutting & Fabrication Center S/N 25-228, Frame Saw, Left-to-Right Orientation, (2) 20” Blades, Min. Cut Length 6”, Max Lineal Length 21’, 2 Sets 3-Pocket Table Top tooling for Dbl. hung. Horizontal Slider & Picture Window Frame Units, Custom Nylon In-feed Rollers, 3-Pocket Lineal Pre-loader, Feeder Upgrade w/3 Grippers, FABIII Integrated Tool System, 20 Fabrication Tools (includes Shifters, Drills, Dimple Stations & Router Stations), Overhead Straight Cut 90◦ Cutting Option, Label printer Interface, Optimization/Rest Piece Mgmt. Software, Hor. & Vert. Incline Scrap Conveyor System (Item Codes – ONS, PBPO, CTT-3, FPS, IFR, SD-LP, FAB-3, CFT, OSCN, SCS, DCS, BCS, Optimize, RPM)(NOTE: This unit will be offered as part of the bulk bid, Lot #1 in Virginia and also as a privilege choice bid behind STURTZ SMI-Linear Pro VHC-Cut Automatic Cutting & Fabrication Center S/N 25-2272003 STURTZ SMI-SCC-104F Automated FlexFab Sawing & Fabrication Center S/N 25065, For Master Frame Dbl. Hung & Dbl. Sider, 20” Dia Blades, Ball Screw Feed System, Saw Head Actuation for ‘Zero Scrap’ Processing, will cut up to 4 Profiles per Cycle, Self Adjusting Horizontal Clamping for Variable Profile Widths, 4-Axis Dual Bridge Fab Center w/ Routers, Drills, Punches or Dimpling, 11 Fabrication Tools, Flex Clamp System, Programmable Blade, Path System, Jamb Notching Modifications, Feeding & Positioning System, Table Top Fixtures for 4 Frame Profiles, PC Monitor System, Lineal Pre-Load

Magazine, Network Control Card, Automated Off-Load & Conveyor System, Horizontal & Vertical Inline Scrap Conveyor System, Dust Collector, Automated Off-Load & Sorting System w/ 8 Changeout 96-Hole Sorting Carts, (Item Codes SCC-104F, FFM4, SCC-FT, FCS, PB-F, SCC-JNM, FPS-2A4GA, SCC-TTF, PC MS, SCC-LP, DT-O, OCS-F, 11656, 80025, SCC-Sorter)

2007 JOSEPH SFMC CNC Casement Fabrication Machine Center, S/N 4422-04-07, Servo Infeed for up to 16’, (2) 45° Saws, Routers, Asst Tooling for Fabrication, Power Outfeed Conveyor, Networkable

2006 GED (GLASS EQUIPMENT DEVELOPMENT) MC-3000 Master Frame Machining Center, S/N 061002 w/ 2-14” Saw Blades, Automated for Drilling, Punching, Routing, Dimpling and Notching

2000 SAMPSON MC-2 Sash Machining Center, S/N 001581, ALLEN-BRADLEY Touch Screen Control, Saws

● WELDERS ●

2004 STURTZ SMI-HSM-30/25 BDS Horizontal Four Point Frame Welder, Multi-Tiered, S/N 110196, 136”x109” Max Welding Range (w/out Tooling), 128”x100” (w/2” nail fin), 15 ½” x 15 ½” Min (Auto Unload), 12”x12” Min (Man Unload), Multi-tiered Spring Loaded Weld Fixtures (for Frame), Notched Welding Capable, (Item Codes – WP4-MT-F, NM4-ST-F)

2007 STURTZ SMI-HSM- 19/19-C-DS Twin (2) Compact Horizontal Four Point Sash Welders S/N 130026, Multiple CNC Axis Control, Teflon Roller System, Welds Sashes 11 ½” x 11 ½” to 72”x72”, Max Profile Width 3”, Dbl. Pickup & Sgl. Drop-Off, Intermediate Buffer

(This Welder is interfaced and networked to CNC-H-4K-20/20 Compact Cleaner)

2003 STURTZ SMI-VSM- 20/19-C-DS Compact Vertical Four Point Sash Welders S/N 120064, Multiple CNC Axis Control, Stand Alone Unit, Teflon Roller System, Min Window Size 11.5”x11.5”, Max Window Size 72”x72”, Max Profile Width 3”

2004 SAMPSON SW70612CE Four Point Sash Welder, S/N AB040002, ALLEN BRADLEY Versaview Control 1500P, 96”x120” (est.) - This unit has been fitted w/ STURTZ Towers

1999 SAMPSON SW7000 Four Point Master Frame Welder, S/N 99284, 84”x96”

1998 SAMPSON SW7000 Four Point Casement Welder, S/N 98335, Auto Eject

1999 SAMPSON SW6045 Four Point Welder, S/N 99253, PC Control

1991 SAMPSON A-312-B90/1 Two Point Casement Welder, S/N M-15-2959

● CORNER CLEANERS ●

2007 STURTZ SMI-CNC-H-4K-20/20 Four Head CNC Pass Through Sash Compact Corner Cleaner, S/N 5640, Fully Automated, Motion Control PLC, Hor. & Vertical Scarf Knives, Programmable Sawblade for Outer Contour & Vertical Drilling, Auto Tilt Latch Routing & Pivot Bar Drilling, Built-in Chip Conveyor, Min Size 12”x12”, Max Size 72”x72”, Max Profile Width 2.5” & Height 3”, Min. Height 1.4”

Note: This cleaner is interfaced and networked with the HSM-10/19-C-DS Welder with Buffer Units)

2010 STURTZ SMI-CNC-2K-18 Twin Head CNC Sash Corner Cleaner, S/N 40154, Min. Size 11.5”x11.5”, Max Size 72”x72”, Max Profile Height 1”, Max Width 2.5”, Max Profile Height 1”, Hor. & Vertical Scarf Knives, Overhead Vert. Drill, Auto Tilt Latch Routing, Movable Head Positioning, Bar Code Scanner, Built-in Chip Conveyor

2005 STURTZ SMI-CNC-2K-30-F Twin Head CNC Master Frame Corner Cleaner, S/N40055, Min Size 16.5”x16.5”, Max Size 120”x120”, Max Profile Width 3.6”, Max Profile Height 7”, 9 Cleaning Tools per head, Movable Head Positioning, PC Monitor System, Clean Curved & Sloped Patterns

Compact Sash Line w/ STURTZ SMI-HSM 19/19-C-DS Welder & SMI-CNC H-4K-20/20 Sash Cleaner

STURTZ SMI- Linear Pro-VHC- Cut & Fabrication Center

2011

STURTZ SD7000 CNC Casement Auto Twin Miter & Fab Center

2011

STURTZ SMI-CNC-2K-18 Corner Cleaner2010

2007

5

QUAKER CITY AUCTIONEERS’ LIVE & ONLINESALE: THURSDAY, NOVEMBER 15th at 10 am EST

Location 2: 767 Sans Souci Pkwy, Wilkes-Barre, PA 18706 Inspection: Wednesday, November 14th, 9 am to 4 pm

2005 GED PC-4000 Programmable Master Frame Corner Cleaner, S/N 051330, 80”

1999 SAMPSON PC-4000 Corner Cleaner, S/N 99286, w/ 4000 Motion Controller, 80”

(2) 2001 & 2000 SAMPSON CM4000 Twin Station Corner Cleaners, 78”, S/N 011382 & 000026

1993 STURTZ WP.CNC/S Corner Cleaner, S/N 5076-1, 6 Axis Pneumatic Clamping & Hold-down Feed, Dbl. Arm Bridge Type Positioner, JETTER CNC Control, Top/Bottom Scarf Units & Drills

● SAWS ●

2011 STURTZ SMI-SD7000 Automated Miter Saw, S/N 061101207, Miter Cut & Fabricate Casement Frame & Sash Profiles, (2) 20” Blades, Min Cut Length 6”, Max Cut Length 20”, Auto Angle Adjmt. 90° to 45°, Feeding & Positioning System, JETTER Operator Interface Control, Table Support System, Tabletop Tooling, Gripper Shift Modification, Feeding & Positioning System Modification, FlexFab 1 Fabrication System, w/ Sgl. Axis Bridge System w/ Modules for Punching, Routing, Drilling or Dimpling, Fabrication Tooling for FlexFab 2 w/ Lock Rail, Keep Rail, Bottom & Top Rail Fabrication Tooling, Network Control Card, Label Printer Interface, Hor. & Vert. Incline Scrap Conveyors, Dust Collector, Optimization & Rest Piece Mgmt. Software

2003 STURTZ SD8000 Programmable Thru-Feed Notch Saw, S/N 12559, will Miter DH Frame Profiles, Notch Sill End of Jambs & Both Ends of Sill, (2) 20”

Blades, Min. Cut Length 6”, Max Cut Length 21”, L-R Feed, Vert. Pneu. Clamping System, Tabletop Tooling FlexFab 2 Fabrication System for Punching, Routing, Drilling or Dimpling, Fabrication Tooling for FlexFab 2 w/ 5 tools, NRT 500 Conveyor

2004 STURTZ SD7000 CNC Automatic Dbl. Miter Sash Saw, S/N 16932, (2) 20” Blades, Servo Driven Auto Feed Positioning System, JETTER CNC Controls

2006 JOSEPH CNC Screen Saw, S/N 4338-05-06 w/ Feeder, Multiple Saw Orientation

2008 JOSEPH ZDM 45/90 CNC Zero Scrap Dbl. Miter Frame 45-90 Saw, S/N 232R-3-0208, (2) 45-90 Degree Independent 16” Hor. Miter Blades, Servo Infeed, Networkable

2007 JOSEPH ZDM 45/90 CNC Zero Scrap Dbl. Miter Sash 45-90 Saw, S/N 3000-25-08-07, (2) 45-90 Degree

Independent 16” Hor. Miter Blades, Servo Infeed, Networkable

1999 JOSEPH NS 4590 Sash Notch Saw, S/N 340-04-1099

(3) JOSEPH NS 4590 Notch Saws

STURTZ TA350M Sgl. Head Upcut Saw

(3) PISTORIUS RHSC12P Sgl. Cut Saws, 12” Blade

(2) SAMPSON SC12 Sgl. Cut Saws

SAMPSON MN Miter Saw, S/N 22498 w/ TIGER STOP Programmable Stop, 12” Blade

SAMPSON MN12 Twin Miter Saw

SAMPSON SCA Air-Operated Cut-Off Saw(6) MILWAUKEE 10” Compound Miter SawDeWALT DW716 Dbl. Bevel Compound Miter SawSAFETY SPEED Cut H4 Panel Saw, S/N 45813(2) HITACHI C10FCE2 10” Compound Miter Saws(10) TIGER STOP Programmable Stops1986 DOALL Contour 20” Vertical Band Saw, S/N 457-86362GRIZZLY 15” BandsawPOWRKRAFT Radial Arm Saw

●INSULATING GLASS LINE ●

2006 BESTEN T.A.P.E. (Total Automated Production Equipment) AT Insulating Glass Line, DURASEAL & DURALITE Product, Installed in 2008. 2007 GED MWASH4084110000 84” Glass Washer, S/N 13157, Min. Glass Size 9 ½” Sq. Glass, Thickness Max ¼”, Min .085” w/ ALLEN-BRADLEY Panelview Plus 1500 Control, (2) 84”x96” Conveyors, Tape Sealant Applicator, S/N 90-018-0408 w/ Seal Touch Panel w/ VideoJet Excel 170i Inkjet Printer, PNL Main Control Center w/ AB PV Plus 1500 Controller, (2) 84”x96” Conveyors, A-B Panelview Plus 1500 Touch Screen System, (2) 84”x96” Conveyors, 94 TAFT 108”x72” Tilt Table, 84”x96” Conveyor, BAT 93”x108” Butterfly Station 84”x96” Conveyor, HRP-84 Heated Roller Press, A-B Panelview Plus 1500 TS Control w/ Pedestal, Hydraulic Pump Unit, Conveyor

BILLCO Insulating Glass Line, 72” Glass Washer w/ 6 Stations, 60”x99” Roller Table, Caster Top Tilt Table 60”x100” S/N CH24 BESTEN Vacuum Table, 84”x84”, BESTEN 84”x60” Tilt Vacuum Table, BILLCO 62”x62” Caster Roller Table, BILLCO 64” Heated Roller Press, Control Unit

●CNC GLASS CUTTER ●

2001 BILLCO CNC 2121 Architectural Cutting Machine, S/N 01125, 3 Axis, FANUC 21iM CNC Control, ALPHA Servos w/ Edge Detect, Max Glass Size 72”x84”, Min Glass Thickness 1/16”, 86”x136” Air Vent Float Cutting Table, Belt Conveyor, Servo Control Console w/ GLASS LOADING SYSTEM, 4 Overhead Air Operated Suction Arms w/ (2) 77”x133” Vacuum Conveyor Tables, 4 Glass Skid Dollie Carts, Drop Tables1 of 2 JOSEPH ZDM 45/90 Zero Scrap Dbl. Miter

Sash Saws

GED MC-3000 Master Frame Machining Center

2006JOSEPH SFMC CNC Casement

Fabrication Center

2007

STURTZ SMI-CNC-2K-30-F Master Frame Corner Cleaner

2005

JOSEPH CNC Screen Saw

2006

2008

6

●MISC. GLASS EQUIPMENT ●

• BILLCO 696-8 Glass Washer, S/N W001124-02 • BILLCO Control Cab • (3) 48”x102” Conveyors • 58”x98” Caster Table • BUTTERFLY Tilt Caster Table 60”x100” • 60” Level IV Heat Section • Assembler & Conveyor • Vertical Glass Assembly Line Control • Asst. Conveyors

• GED MHM03550424 Heated Roller Press Control, 98” Heated Press, Pinch Feed Rolls, 86”x124” Roller Table & 52”x84” Conveyor • MSMEXT41 • Mint 400020140E0 • Roller Former • 9-Station • Twin Punch, Insulating Pump w/ Control

● MISC. WINDOW EQUIPMENT ●

(2) DAILEY MFG X-Y Automatic Silicone Application Systems w/PC, GRACO SENATOR HD Air Pumps(3) PYLES Therm-o-Flow 55 Insulating Pumps w/ Controls(2) GED Insulating Pumps w/ Controls(2) CNC Auto Screen Assembly MachinesScreening Table w/ Magnetic Top, Twin 4-Head Rotary Screen Feeders2002 SAMPSON FS-100 Finslitter S/N 021054STIFNAR Bar Rollformer w/ Cut-Off (for Stiffner Bars) w/ Horizontal Uncoiler mdl. CR5052, S/N 524689, 5000 LBS Cap.GED 9-Station Rollformer GRID Fabrication Center (Flat Bar & Contour) w/ Air Operated Aluminum Cut-Off Saw w/ 4 Magazine Feeders, mtd on Table, 1/4”x5/8” Flat, 8”x18” ContourCARLSON SERVICES D2071VS Vertical Vinyl Sash Clamp, S/N 71962082 w/ (4) Air Drills & (2) Vibratory Hopper Feeds

ATCO CC270 Traveling Twin Head Corner Processor, S/N 20130 WEGOMA AKF106 Automatic End Milling MachineWEGOMA KF228 Twin Spdl. Copy Router, S/N 11125WEGOMA KF226 Sgl. Head Copy Router, S/N 89492(50) Asst. Air Operated Punches (w/ asst. tooling)(3) Gas Filling Stations(30) ASTRO Air Screw Guns & Socket Drives, Tilt Top Tables, Glazing, Assembly, Inspection& Balancing Roller Racks and Tables(2) ALVA ALLEN B2, FAMCO 40 & BENCHMASTER 7½ Ton 0B1 Punch Presses● PACKAGING ●

2007 KALAMAZOO 860FA12-PBEZ Fully Automatic Winder Stretch Wrap System, S/N 070102, Powered Belt Conveyor, EZ-Loader Powered Roller Conveyor w/ Air Lift, Spring Loaded Product Hold-downs

(2) 2001 & 2000 KALAMAZOO 939-M7 Rotary Vertical ‘Window’ Wrappers, S/N 01108 & 001107, 60” Dia. Turntable, 3000 LBS Cap, 96”x96” Max Window Size, 30” Film Cap, Window Clamping Table Fixtures

● MACHINE SHOP ●

KOLEE S718HA Hydraulic Feed Surface Grinder, S/N 1466-164, 6”x18” Permanent Magnetic Chuck

ENCO 110-2072 Engine Lathe, S/N 886525, 12”x34”, SS 70-1220 RPM, 7” 3-Jaw Chuck, Inch/Metric Threading

CLEARING HARRISON 16” Engine Lathe, S/N NA, 16”x50”, 32-1000 RPM, 31/8” Thru Spdl. Dia.

BRIDGEPORT J-Head Vertical Mill, 9”x48” Table, 6” Riser, SS 80-2720 RPM

DOALL Contour 20” Vertical Band Saw, S/N 457-86362, 26”x26” Table, Blade Welder/Grinder

WILTON 3400 Hor./Vert. Band Saw, S/N 060111409, ¾ HP

MSC 15”Pedestal Drill, S/N 123653, Mdl. 951225, ½ HP

(2) DAYTON 17” Pedestal Drill Presses, Mdl. 3Z918F, w/ COMMANDER Mdl. 700 Multi-Drill Head

MSC 10” Drill Press, Mdl. 951205, S/N 248482

WILTON 2704 Pedestal Drill Press, S/N 134854, 15”

CRAFTSMAN 17” Pedestal Drill Press

DAYTON 6”x9” Belt & Disc Sander

LINCOLN AC-225 Arc Welder

● AIR SYSTEMS ●

2000 KAESER CS76 Rotary Screw Air Compressor, S/N 1053, 60 HP, 252 CFM, 125 PSIG, 20,505 Hrs.

2000 KAESER CSD75 Rotary Screw Air Compressor, S/N 1006

KAESER SK26 Rotary Screw Air Compressor, S/N NA, 20 HP, 6,552 Hrs.

KAESER AS36 Rotary Screw Air Compressor, S/N NA, 30 HP, 13,363 Hrs.

(2) KAESER TE121 Refrigerated Air Dryers, S/N’s 1070 & 1008

KAESER KCF 100 Oil Water Separator

(2) Remote Vertical Air Tanks (approx. 300 Gallons)

● SUPPORT & WAREHOUSE EQUIPMENT ●

PHILADELPHIA TRAMAIL Vertical Downstroke Baler, S/N 88B 6871, 30”x60” Bales

ENCORE S-38 Walk-Behind Floor Scrubber, 907 Hrs.

E-Z Go Golf Cart

(2) DONALDSON Torit 80 Cab Enclosed Dust Collectors

Location 2: 767 Sans Souci Pkwy, Wilkes-Barre, PA 18706 Inspection: Wednesday, November 14th, 9 am to 4 pm

BILLCO CNC 2121 Architectural Cutting Machine w/ Loading System

2001

1 of 2 KALAMAZOO 939-M7 Rotary Window Wrappers

2001

STURTZ SMI-HSM-30/25 BDS 4-Point Frame Welder

2004

1 of 2 DAILEY X-Y Silicone Application Systems w/ GRACO Pumps

7

(5) DELTA 50-764 & 50-861 Dust Collectors, 5 HP

(10) RAPISTAN Power Belt Conveyors to 30’

(18) Glass Harp Racks • (60) Wooden Slotted Window/Screen Carts • (20) Angle Iron A-Frame Carts • (35) 3-Sided Carts • (20) Wooden Window Carts • (65) Asst. Multi-Shelf Carts w/ Dividers • (9) Flat Trucks • (11) 2-Tier Carts w/ Dividers • Raised Glass Skid Dollies • Assembly Tables w/ Raised Corners • Inspection & Assembly Racks w/ Roller Feeds • (46) Sections of Pallet Racking 120”x32”x134” • (2) GALBREATH Self-Dumping Hoppers • (30) Iron Work Tables to 10’ • Cantilever Racks • DAYTON Infra-Red Gas Heaters • Pedestal Fans • Hydraulic Pallet Jacks • HD Blowers

● INVENTORY ●

Galvanized 690 Slit Coils • Corrugated Kraft Rolls • 60+ Rolls BETTERVUE Screen • Aluminum Screening • 25 Boxes AMESBURY Extruded Screen Spline • Spline Rolls • Tru-Seal Duralite & Duraseal Rolls • EDGETECH SDL-S Sentials • Gridloc Clips • 1000’s Spring & Coil BSI & CALDWELL Balances • Screen Triggers, Pulls & Corners

• PHIFERGLASS Rolls of Screening • TRUTH & AMESBURY Operators, Tie Bars, Hinges, Locks, Keepers, Latches, Wheels, Handles, Plugs, Stops & Pivot Bars • TREM GLAZE Silicone & Roof Sealant • ULTRAFAB Wool Pile • LAMATEX Head & Sill Gasket • AMESBURY Extruded Stripping • Glazing Tape • Skids of Hardware • Foam • Insulating Strips • Packaging Materials

QUAKER CITY AUCTIONEERS’ LIVE & ONLINE SALE: THURSDAY, NOVEMBER 15th at 10 am EST

Location 2: 767 Sans Souci Pkwy, Wilkes-Barre, PA 18706 Inspection: Wednesday, November 14th, 9 am to 4 pm

LOCATION 1SALE: TUES., NOVEMBER 13th at 10:00 pm EST 4914 Lambert Place, Dublin, VA 24084

AIRPORTS:Regional – Roanoke Regional Airport (ROA) – 52 Miles from Dublin

International – Charlotte/Dougls Int’l (CLT) – 153 Miles from Dublin

HOTELS:1) HAMPTON INN 540-674-57004420 Cletburne Blvd., Dublin, VA 24084

2) COMFORT INN 540-674-11004424 Cletburne Blvd., Dublin, VA 24084

3) HOLIDAY INN EXPRESS 540-674-16004424 Cletburne Blvd., Dublin, VA 24084

————————————

LOCATION 2 SALE: WED., NOVEMBER 15th at 10 am EST767 Sans Souci Pkwy, Wilkes-Barre, PA 18706

AIRPORTS:Wilkes-Barre Scranton Int’l (WBW)

HOTELS:1) Best Western Genetti Hotel 570-823-6152

2) Comfort Inn & Suites 570-823-0500

3) Ramada Inn Wikes 570-824-7100

CNC Auto Screen Machine

KALAMAZOO 860FA12-PBEZ Auto Winder Stretch Wrap System

2007

Partial View of KAESER Air Systems

STURTZ SD 8000 CNC Thru-Feed Notch Saw

STURTZ SMI-VSM-20/19-C-DS Compact 4-Point Sash Welder

Partial View of Glass Harp Racks

CROWN RD5020-30 Standup Electric Reach Fork Lift (VA. Location)

PRESORTED FIRST CLASS MAILUS POSTAGE PAID

PHILA PA 19116

Permit No. 2278

2860 Memphis Street • Philadelphia, PA 19134Phone 215.426.5300 • Fax 215.426.6897www.quakercityauction.com

License #AU001769L

MULTI-MILLION DOLLAR 2-Day Auction LIVE & ONLINE VINYL WINDOW MANUFACTURER AUCTION

DOVE VINYL WINDOWS - 2-DAYS, 2-LOCATIONS TUESDAY, NOVEMBER 13th at 10 am EST: 4914 Lambert Pl., Dublin, VA 24084

THURSDAY, NOVEMBER 15th at 10 am EST: 767 Sans Souci Pkwy, Wilkes-Barre, PA 18706

TERMS: (BUYERS PREMIUM) 12% buyers premium live. 15% Buyers Premium online. Full payment due upon receipt of invoice in Cash, Bank Check or Wire Transfer. No equipment may be removed until final payment in full is received. Business check accepted only when accompanied by Bank Letter of Guarantee: ‘Customer Name’ is a customer of the bank. This bank will guarantee unqualified payment to Quaker City Auctioneer’s on the account listed above up to the amount of $)_____. This guarantee is in effect until_____. Failure to pay auction bill will result in forfeiture of all items purchased. Auctioneer will retain all deposit monies paid, liquidate the buyers’ auction purchases and any deficiencies along with all expenses will be charges to the original buyer. Wire Transfers to Quaker City Auctioneer’s account prior to sale is acceptable. Sales tax will be charged where applicable.

PLEASE NOTE: All items will be sold as is, where is, to the highest bidder in cash in accordance with our normal terms of sale, also posted throughout premises. Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information contained in this brochure. Buyers are urged to inspect prior to sale. The auctioneer is not responsible for discrepancies in description or nomenclature and assumes no liability for errors or omissions in the listing. The auctioneer reserves the right to accept or reject any and all bids, to add, reduce and group any lots he deems appropriate. No items will be permitted to be removed until conclusion of sale and payment in full has been received. Neither the auctioneer nor any

other party has heretofore and does not hereby make any representation or warranty, express or implied, with respect to the merchantability, condition, quality, durability or fitness of any items sold or any accompanying goods for the purpose of any buyers or their transferees, successors or assigns.

The Merchandise is sold without any warranty of any kind, whether express or implied. The Owner/seller makes no warranty of merchantability or fitness for a particular purpose. The buyer acknowledges that it has not relied upon the skill or judgement of the seller in selecting or evaluating the Merchandise. The buyer represents that it has inspected the Merchandise, or that it has had a full and fair opportunity to do so and has declined to do so. Having inspected the Merchandise (or having waived the right to do so) the buyer represents that it accepts the Merchandise in “as is” condition. The buyer acknowledges that the Auctioneer has no authority to make any warranty or representation on behalf of the owner.

TO BID BY PROXY: Prior to sale date, contact one of our representatives to act on your behalf. You must provide us with a description, lot number and/or serial number along with your desired bid amount. We will make every attempt to buy those items at the lowest possible price. You will be required to wire or send your bids with a 25% deposit to our office prior to sale day. Deposits for unsuccessful bids will be returned within 72 hours. For information call one of our representatives at 215-426-5300 or fax 215-426-6897

LIVE & ONLINE MULTI-MILLION DOLLAR VINYL WINDOW MANUFACTURER 2-DAY, 2-LOCATION AUCTIONDOVE VINYL WINDOWSTuesday, November 13th at 10:00 am ESTOne Year Old Facility4914 Lambert Place, Dublin, VA 24084Thursday, November 15th at 10:00 am EST767 Sans Souci Parkway, Wilkes-Barre, PA 18706Bid Online at Bidspotter.com

8