multi-function drilling rig
TRANSCRIPT
金泰机械
SD30AMulti-Function
Drilling Rig
SD30A Multi-Function Drilling Rig
2
Multi-Function Drilling RigSD30A
Mast head
Mast
Crowd cylinder
Main winch
Auxiliary winch
Drilling bit
Quadruple Parallelogram Support Structure
Undercarriage
Upper carrier
Drilling bit
Rotary head
Kelly bar
Kelly bar guide
3
Quadruple Parallelogram Support Structure
Upper carrier
SD30A Main Technical Parameters
Model SD30A
Upper base carrier JS80
Engine QSM11-Tier 3
Rated output (kW/rpm) 299/1900
Rated output JT80
• Engine: Cummins QSM11, USA• Emission standard: Tier 3
• Dynamic mast angle• Dynamic display of dr i l l ing tool posit ion
anddrilling depth• Dynamic display of pulling force of winch
• Main and auxiliary pump: Kawasaki Load-sensitive variable pump, Japan
• Main valve: Kawasaki special design for rotary drilling rig, Japan
• Design for large drift diameter and large flow
The SD30A is Jintai new model of rotary drilling rig. It is advanced hydraulic system to enhance the power efficiency, and also through optimum design to proper readjust the counterweight achieving the effective balance from pull down and pull up force and therefore improving the ability for penetration in rock formation..
SD30A Multi-Function Drilling Rig
4
Undercarriage• High strength slewing bearing support.• Robust H Type Frame connected structure.• Hydraulic cylinder activated retractable crawler.• Oversize ground contact bearing capacity to sustain larger over turning torque• High traction force.
Main winch• Special design for long-term heavy load.• Single layer and long drum, fold line groove,
reducing wire rope wear.• Pulling force sensor and depth sensor.• Backward winch frame for transportation.
Upper carrie――High efficiency, cost saving,comfortable, durable long life• Intelligent control system.• Multi-oil pump operation to increase effective output.• Specialize control valve for drilling machine function reducing power loss.• Enlarged and well organized spacious compartment easy accessible for
maintenance.
Modular Type Combination counter weight• Multi-layer Horizontal type counter weight.• Enable smaller turning radius.• Easy for adjustment and combined use.• Easy for dismantling.
5
Advanced driver control cabin• The Jintai Cabin is human engineered to meet international standard,• with all round visibility air conditioned comfortable working condition.• Multi-function control level.• Strong FOPS structure.
Mast head• High strength light weight material design.• Suitable for transportation height.• With sensor for height limit control.
Rotary head• Advanced mechanical and hydraulic design with
direct preliminary gearbox transmission of• Robust and durable construction.• Electronic controlling motor control system easy
to operate,easy to maintain.• Large Diameter hole pivot, effective and high
efficiency design.
Quadruple parallelogram support structure• Dual activating arm to ensure strength and rigidly.• Reinforced protection of the linkage connection of the quads system.• Pin lock at both end to avoid deformation.
6
SD30A Multi-Function Drilling Rig
SD30
2404
0
1000
4680
1300
3750-435037155600
5697
1760
3300
4400
800
3475
462
695
4360
1669
559
0
1 5° 5° 5° 5°
7
Technical ParametersModel SD30A
Height (mm) 24040
Total weight (w/o drill tools) (kg) 86000
Upper undercarriage JS80
Engine QSM11-Tier 3
Rated Power (kW/rpm) 299/1900
Hydraulic system flow(L/min) 2×380+164
Hydraulic system pressure (Mpa) 33
Capacity of fuel tank(L) 650
Capacity of hydraulic oil tank (L) 420
Retractable undercarriage JT80
Crawler shoes width (mm) 800
Crawler length (mm) 5680
Crawler width(retract/extend) (mm) 3300~4400
Traction force (kN) 500
Travel speed (km/h) 1.5
Rotary head
Rotary torque (kNm) 300
Rotation speed (rpm) 6~30
Main winch
Max. single line pulling force (kN) 300
Wire rope diameter (mm) 36
Max. hoisting speed (m/min) 65
Aux. winch
Single line pull (kN) 75
Wire rope diameter (mm) 18
Max. hoisting speed (m/min) 45
Crowd system cylinder type
Stroke (mm) 5700
Crowd force (kN) 250
Pulling force (kN) 250
Crowd winch system
Stroke (mm) 10000
Crowd force (kN) 250
Pulling force (kN) 250
8
SD30A Multi-Function Drilling Rig
HA
L1
L2
NL
T
B
L3
Dimension(mm) SD30A
L1 21142
L2 9475
L3 3772
SD30A Kelly bar size A(m) B(m) Weight (kg) H(m) T(m)
φ470/3/Interlocking 16.9 45.3 8628 4.2 42
φ470/4/Interlocking 16.9 59.9 10860 4.2 56
φ470/5/Friction 16.4 72.4 11800 4.7 70
Kelly bar drilling data (without casing)
Other size and length of Kelly bar can be supplied.
9
Transportation Parameters
2
6935
540
B=3400mmG=80T
Crowd cylinderG=1.1T
320
2140
1680 1310
Rotary headG=5.1T
45036
33
930
12036
1745012662
SD30A Upper carrier and mast
1 SD30 Base transportation:
3160
17450
B=3400mmG=47T
Left and right trackG=2×7T
5600 1172
1070
1860 1070
837
Upper mastG=0.9T
Mast headB=1450mm G=1.2T
3415
2013
Main winch and frameB=2400 G=4.1T
1531
2500
3155
530
29079
8
1044
Count-weight and mast supportG=13.4T
SD30A Kelly bar size A(m) B(m) Weight (kg) H(m) T(m)
φ470/3/Interlocking 16.9 45.3 8628 4.2 42
φ470/4/Interlocking 16.9 59.9 10860 4.2 56
φ470/5/Friction 16.4 72.4 11800 4.7 70
10
SD30A Multi-Function Drilling Rig
Case
SD30A-Chongqi Mingyue City Park project
SD30A-Chongqi Luneng Tai Mountain Seven project
1
1
2
1
2
11
"Warehouse" for fast moving spare parts and tools bring the technology and services to the jobsite.
Provide the inspection, maintenance , repair , modification and updateservices.One stop service : Provide technology updated and performance upgrade and modification plan to maximize the machine value in use.Provide operation, training ,maintenance and repair practice withexperienced foundation technical and service staff for customercultivating own working team.
Sales network & Service
1
2
400-820-8326
Address: 45 Luopu Road Anting ShanghaiTel: 86-21-59572973 Fax: 86-21-59577434E-mail: [email protected]:www.jintai-sh.com
More Information:www.jintai-sh.com
Technical specifications are subject to change without prior notice and incurring responsibility for machines previously sold. The shown machines may have special equipment. Technical data do not consider power losses. Error and misprints reserved.
(M)2018-10-SD30A
SD20 SD36ASD30ASD22 SD25