TEM20/25

Four driving modes provide smooth load handling in different surroundings •

Precise steering and ergonomic hand position enable effective and easy handling •

Spacious and ergonomic driver's compartment •

Floating axels in load wheels ensure stability and good ground contact at all times •

Rocla TEM20/25 is a true multi-directional reach truck with the versatility to handle standard as well as longer and more demanding loads in very narrow and confined spaces. Well-designed ergonomics and sturdy construction delivers optimal handling performance in heavy-duty applications.

Multi-directional Reach Truck

TEM20/25

Manufacturer reserves the right to make changes.

IDENTIFICATION1.1 Manufacturer Rocla Oyj Rocla Oyj1.2 Model TEM 20 TEM 251.3 Power source Electric Electric1.4 Operating mode (pedestrian, stand-on, sit on) Sit-on Sit-on1.5 Nominal capacity / load Q [kg] 2000 25001.6 Load centre c [mm] 600 6001.8 Load wheel axle to fork face (forks lowered) x [mm] See table See table1.9 Wheelbase (forks lowered) y [mm] 1485 1485

WEIGHTS2.1 Truck weight (with nominal load & battery 1100kg) [kg] 6550 73002.3 Axle loadings (without load & with battery) Drive / Load side [kg] 2700 / 2x925 2900 / 2x9502.4 Axle loadings (with nominal load & battery) mast out, Drive / Load side [kg] 850 / 2x2850 600 / 2x33502.5 Axle loadings (with nominal load & battery) mast retracted, Drive / Load side [kg] 2200 / 2x2175 2400 / 2x2450

WHEELS & TYRES3.1 Tyres, material (R=rubber/Vul=Vulkollan) Drive / Load side vul/vul vul/vul3.2 Load wheel dimensions (diameter x width) [mm] Ø285x75 Ø285x753.3 Drive wheel dimensions (diameter x width) [mm] Ø343x140 Ø343x1403.5 Number of the wheels (x=driven) Drive / Load side [mm] 1 / 4 1 / 43.6 Track width (centre of tyres) Load side b10 [mm] 1410 1410

DIMENSIONS4.1 Mast or fork tilting, forwards/backwards ° 2 / 6 2 / 64.2 Lowered mast height (see tables) h1 [mm] See table See table4.3 Free lift h2 [mm] See table See table4.4 Lift h3 [mm] See table See table4.5 Raised mast height (see tables) h4 [mm] See table See table4.7 Height of the overhead guard h6 [mm] 2185 21854.8 Seat (compressed or platform height) h7 [mm] 1055 10554.10 Height of the support legs h8 [mm] 485 4854.15 Fork height, fully lowered h13 [mm] 50 504.19 Overall length (platform up / down) I1 [mm] 2590 25904.20 Powerhead length (to fork face)(platform up / down) I2 [mm] See table See table4.21 Chassis (overall width) b1/b2 [mm] 1700 17004.22 Fork dimensions (thickness/ width/ length) s/e/l [mm] 50 / 120 / 1150 50 / 120 / 11504.24 Width of the fork carriage b3 [mm] 1680 16804.25 Outside width over forks b5 [mm] 560 - 1970 560 - 19704.26 Inner width of the support legs b4 [mm] 900 9004.28 Reach movement l4 [mm] See table See table4.31 Ground clearance m1 [mm] 80 604.32 Ground clearance, centre of wheelbase (forks lowered) m2 [mm] 80 604.33 Working aisle width (Ast3), pallet 1000x1200 mm, load crosswise ( platform up / down) Ast [mm] See table See table4.34 Working aisle width (Ast3), pallet 800x1200 mm, load lengthwise ( platform up / down) Ast [mm] See table See table4.35 Turning radius (forks lowered, platform up / down) Wa [mm] 1800 18004.37 Lenght of the truck without forks l7 [mm] 1980 1980

PERFORMANCE5.1 Travel speed Laden / Unladen [km/h] 10,0 / 10,5 10,0 / 10,55.2 Lifting speed Laden / Unladen [m/s] 0,23 / 0,43 0,21 / 0,435.3 Lowering speed Laden / Unladen [m/s] 0,40 / 0,38 0,40 / 0,385.4 Reach speed, with/without load [m/s] 0.1 / 0.1 0.1 / 0.15.8 Maximum gradeability Laden / Unladen [%] 8,0 / 12,5 7,0 / 125.9 Acceleration time (10 meters), with/without load [s] 6,0 / 5,6 6,5 / 5,55.10 Service Brake Mechanical Mechanical

MOTORS6.1 Drive motor S3 60 min [kW] 7,5 7,56.2 Lift motor S3 15% [kW] 14 146.4 Battery voltage / capacity (5hr. rating) [V/Ah] 48 / 775, 930 48 / 775,9306.5 Battery weight [kg] 1100, 1300 1100, 1300

MISCELLANEOUS8.1 Speed control type Stepless Stepless

Level of noise at the ear level of the driver according to EN 12 053:2001 and EN ISO 4871 in work LpA [dB (A)] 71 71

Level of noise at the ear level of the driver according to EN 12 053:2001 and EN ISO 487, drive/lift/idle LpA [dB (A)] 74/75/60 74/75/60

Whole-body vibration according to EN 13 059:2002 [m/s2] 0,78 0,78Hand-arm vibration according to EN 13 059:2002 [m/s2] < 2,5 < 2,5

8.4

Battery Battery 4.33 4.34 L4 L2 XModel capacity weight Ast Ast3 Ast Ast3 4.28 4.20 1.8

[Ah] [kg] [mm] [mm] [mm] [mm] [mm] [mm] [mm]775 1100 2885 2650 2939 2850 620 1440 350930 1300 2926 2705 2989 2905 565 1495 295775 1100 2885 2650 2939 2850 620 1440 350930 1300 2926 2705 2989 2905 565 1495 295

Ast = Wa + R + 200Ast3 = Wa - X + L6 + 200

h3 h4 h1 h2

Type Tilting

TREV 5400 6200 2495 1800TREV 5700 6500 2595 1900TREV 5900 6700 2662 1967TREV 6300 7100 2795 2100TREV 7000 7800 3028 2333TREV 7500 8300 3195 2500TREV 8000 8800 3362 2667TREV 8500 9300 3528 2833TREV 9000 9800 3695 3000

Tilting carriage 2° / 6°

TEM 20/25

Free liftUpper mast height

Mast height

TEM 20

TEM 25

Lifting heightMast type

TEM20/25

TEM

_EN

G100

9

Options

Rocla Oyj

P.O.Box 88

04401 Järvenpää

Finland

Tel. 020 778 11

Fax 020 778 1440

www.rocla.com

e-mail: rocla@rocla.com

The extremely precise steering of TEM20/25 ensures ef-fective handling of even the longest loads. Ergonomic and well protected operator compartment provides excellent visibility for the driver. Thanks to four driving modes the truck can also be used in very narrow aisles that match the truck’s length.

Special colour stickers •Warning light on the roof •Arm rest •Seat belt •Working lights •Reading lamp •Lifting height indicator •Current output 12V/8A •Rollers for fast battery change •

1. The control panel is ergo-nomically designed with large finger tip switches. Switching between the driving modes is easy with one touch.

2. Driver can choose from nor-mal travel, sideways travel, parallel travel or rotation the best driving mode to maximise the productivity.

3. Floating axle technology enhances the stability and traction, while support wheels benefit from independent steering motors and braking systems.