mtr square bollard led [mtrqbl] selux · light engine bsmfl mtr square bollard led project: type:...
TRANSCRIPT
Page 1 of 7(Rev. 04/2018)
MTRQBL_ss_v1.5 In a continuing eff ort to off er the best product possible, we reserve the right to change, without notice, specifi cations or materials that in our opinion will not alter the function of the product. Specifi cation sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
ApprovalsProduct Modifi cationsPlease list modifi cation requirements for review by factory:
LED WARRANTY
5YEAR
MTR Square Bollard LED
Project:
Type: Qty:
Date: Customer:
Date:
Series BSMFL MTR Square Bollard LED Flat Top
Light Engine 1B30 2B30 3B30
CCT 272700K
303000K
Height 2.5 2 1/2 feet
3 3 feet
3.5 3 1/2 feet
4 4 feet
Finish WHWhite
BKBlack
BZBronze
SPSpecify Premium Color
Voltage 120 208 240 277 3471 4801
Options DMDimming(0-10V)
HL502
Hi-Lo Switching
REC 3GFCI Receptacle
BSMFL
for other CCTs please consult factory
SV Silver
Order Code: - - - - -BSMFL -
4B30
353500K
404000K
2 120V, 240V, and 277V only3 Only available in 3.5 and 4 ft. heights, 120V only
1 Requires step down transformer
REC2120V GFCI Receptacle w/In-Use Cover
UNV120-277V
Page 2 of 7 (Rev. 04/2018)
MTRQBL_ss_v1.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
1. Luminaire Cover - Die-cast, aluminum cover, with smooth crisp form to reflect and complement the bollard design. Removes by loosening four stainless steel screws for easy access to LED chamber.
2. Gasketing - (not shown) Continuous gaskets provide weather-proofing, dust, and insect control at shielding base, fixture cover and between MTR rings.
3. Shielding - Consists of 8” (200mm) square injection-molded acrylic multi-prisms for total reflection (MTR). MTR rings have a wall thickness of .591” and are patterned after the light-bending characteristics of a prism.
4. LED Light Engine - (not shown) High effi-ciency LED light engine equipped with brand-name LEDs, available in 2700K, 3000K, 3500K, or 4000K CCT tolerance within a 3-step MacAdams ellipse.
5. Drivers - (not shown) Electronic universal 120-277V, PFC > 0.95
6. Diffuser - (not shown) LED optimized UV resistant material ensures evenly lit MTR rings at high transmittance.
7. Bollard Fitter - Die-cast aluminum fitter, with built-in gasketing ridges, for smooth transition to column.
8. Surge Protector - (not shown) Designed to protect luminaire from electrical surge (10kA).
9. Hi-Lo Switching Option - (not shown) Please see p. 3 for details.
Exterior Luminaire Finish - Selux utilizes a high quality Polyester Powder Coating. All Selux luminaires and poles are finished in our Tiger Drylac certified facility and undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultravio-let resistance for color retention. All products are tested in accordance with test specifications for coatings from ASTM and PCI.
Standard exterior colors are White (WH), Black (BK), Bronze (BZ), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide.
5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the MTR Bollard LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED array when installed and operated according to Selux instructions. For details, see “Selux Terms and Condition of Sale.”
Listings and Ratings: Tested to INRTL Wet Location and IESNA LM-79-08 standards. LED tested to LM-80 standards. Luminaire and LED tested at 25°C (77°F) ambient temperature.
NRTL Listed for Wet Location (i.e. UL, CSA)
Visit selux.us for our LED End of Life recycling policy.
Specifications
8” (200mm)
1’-0 1/8” (308mm)
MTR Square Bollard LED
Net Weight (4’ = 40lbs)
BSMFL
1
7
3
6
Page 3 of 7 (Rev. 04/2018)
MTRQBL_ss_v1.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
MTR Square Bollard LED
Standard Single Wiring For 120-277V
Wiring
0-10V Dimming Option (DM) Wiring For 120-277V
Hi-Lo Switching Option (HL) Wiring For 120-277V. When red is energized, light output will be at “Lo” level. Standard HL level: HL50 = low output, 50%. For other combinations, consult factory.
Surge Protector
L1
N White
Black
Green
Ground
Light Engine
From Line Cord
Surge Protector
L1
N White
Black
Green
Ground
Light Engine
From Line Cord
RedL2
Relay
Surge Protector
L1
N White
Black
Green
Ground
Light Engine
From Line Cord
Dim (-)
Dim (+)
Orange
Red
Page 4 of 7 (Rev. 04/2018)
MTRQBL_ss_v1.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
MTR Square Bollard LED
347/480V (Standard)
Wiring
347/480V with 0-10V Dimming Option
Surge Protector
L1
N White
Black
Green
Ground
Light EngineFrom
Line Cord
Surge Protector
L1
N White
Black
Green
Ground
Light EngineFrom
Line Cord
RedDim (+)
Auto Transformer
Auto Transformer
OrangeDim (-)
Page 5 of 7 (Rev. 04/2018)
MTRQBL_ss_v1.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
MTR Square Bollard LED
Mounting
Anchorage Information
BOLT CIRCLE DETAIL (Not to Scale)USE CAUTION WHEN SETTING ANCHOR BOLTS. BOLTS MUST BE VERTICALLY STRAIGHT AND CENTERED ON DIMENSIONS SHOWN.
NOTES:1. BOLLARD ORIENTATION IS CRITICAL, ROD & HANDHOLE LOCATIONS ARE CRITICAL.2. ADEQUATE DRAINAGE MUST BE PROVIDED IN CONCRETE FOUNDATION.3. CONDUIT SHOULD BE STUBBED UP ABOVE THE CONCRETE FOOTING.
Ø 4" [Ø 101.6mm]CONDUIT OPENING
Ø 6 3/16" [Ø157.2mm]BOLT CIRCLE
3/8-16 GALVANIZEDHEAVY HEX NUT
3/8-16 x 12" GALVANIZEDANCHOR BOLT
3/8" GALVANIZEDFLAT WASHER
CONCRETE (BY OTHERS)
3/8-16 GALVANIZEDHEAVY HEX NUT
2" [50.8mm]
1/16" [1.6mm]
Ref.
7 7/8" [200.0mm] SQUARE
4 3/8" [111.2mm]
HANDHOLE SIDE OF COLUMN
4 3/8” (111.2mm)
7 7/8” (200mm) Square
Ø 6 3/16” (Ø 157.2mm) Bolt Circle
Ø 4” (Ø 101.6mm) Conduit Opening 1/16”
(1.6mm) Ref.
2” (50.8mm)
Profiles
2.5 30”
3 36”
3.5 40”
4 48”
Height
Page 6 of 7 (Rev. 04/2018)
MTRQBL_ss_v1.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
MTR Square Bollard LED
Photometry
1B30 / 7W LED / 3000K CCTISOFOOTCANDLE LINES OF HORIZONTAL ILLUMINANCE
012 2.253 3.75 45 675
4
32.75
21.75
1
0
1
2
3
House Side Street Side
Distance In Units Of Mounting Heigh tValues Based On 4 Foot Mounting Heigh t
.1
.2
.5
1
2
79
157
236
314
1
Maximum Candela = 314.4 Located At Horizontal Angle = 0, Vertical Angle = 67.5# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)
ISOFOOTCANDLE LINES OF HORIZONTAL ILLUMINANCE
012 2.253 3.75 45 675
4
32.75
21.75
1
0
1
2
3
House Side Street Side
Distance In Units Of Mounting Heigh tValues Based On 4 Foot Mounting Heigh t
.1
.2
.5
1
2
4B30 / 26W LED / 3000K CCT
50
100
150
200
1
Maximum Candela = 200.175 Located At Horizontal Angle = 0, Vertical Angle = 67.5# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)
1B30 2B30 3B30 4B30
Handhole
Energy Consumption
Light Engine
Power Input 8W 16W 23W 31W
1B30 2B30 3B30 4B30
LED Light Engine Distriburion Guide
Catalog #: BSMFL-X-1B30-30-XX-UNV Delivered Lumens: 505 Input Watts: 6.9905W Efficacy: 72 lm/WCCT: 2947KCRI (Ra): 94.9 Maximum candela of 200 at 67.5° from vertical.IES classification: Type IVMounting Height: 4’ (1.22m)BUG Rating: B0-U3-G1Power Factor: 0.916Total Harmonic Distortion: 15.4%
Catalog #: BSMFL-X-4B30-30-XX-UNV Delivered Lumens: 2207 Input Watts: 26.5947W Efficacy: 83 lm/WCCT: 2947KCRI (Ra): 94.9 Maximum candela of 314 at 67.5° from vertical.IES classification: Type VSMounting Height: 4’ (1.22m)BUG Rating: B1-U4-G1Power Factor: 0.980Total Harmonic Distortion: 10.4%
4000K3500K3000K2700K
Light Engine Lumens Wattages1B30 0.243 0.2632B30 0.459 0.4793B30 0.877 0.9174B30 1.000 1.000
MTR Square LED Bollard Photometry Multiplier Table
CCT Multiplier
Light Engine Multiplier
1.0001.0100.9420.884
Page 7 of 7 (Rev. 04/2018)
MTRQBL_ss_v1.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
MTR Square Bollard LED
Photometry
Model# Watts Delivered LumensCORL Toolbox Scale Factor
Lumens/WattLight Engine
MultiplierCCT Multiplier
BSMFL-X-1B30-27-XX-UNV 6.99 474 0.884 67.8 0.243
BSMFL-X-2B30-27-XX-UNV 12.73 897 0.884 70.4 0.459
BSMFL-X-3B30-27-XX-UNV 24.36 1710 0.884 70.2 0.876
BSMFL-X-4B30-27-XX-UNV 26.60 1951 0.884 73.4 0.884
BSMFL-X-1B30-30-XX-UNV 6.99 505 0.942 72.2 0.243
BSMFL-X-2B30-30-XX-UNV 12.73 955 0.942 75.0 0.459
BSMFL-X-3B30-30-XX-UNV 24.36 1821 0.942 74.8 0.876
BSMFL-X-4B30-30-XX-UNV 26.60 2079 0.942 78.1 0.942
BSMFL-X-1B30-35-XX-UNV 6.99 542 1.010 77.5 0.243
BSMFL-X-2B30-35-XX-UNV 12.74 1025 1.010 80.4 0.459
BSMFL-X-3B30-35-XX-UNV 24.36 1954 1.010 80.2 0.876
BSMFL-X-4B30-35-XX-UNV 26.59 2230 1.010 83.9 1.010
BSMFL-X-1B30-40-XX-UNV 6.99 536 0.243 76.7 0.243
BSMFL-X-2B30-40-XX-UNV 12.74 1014 0.459 79.6 0.459
BSMFL-X-3B30-40-XX-UNV 24.36 1934 0.876 79.4 0.876
BSMFL-X-4B30-40-XX-UNV 26.59 2207 1.000 83.0 1.000
400
0K
(M
ulti
plie
r =
1.0
00
)35
00
K (
Mul
tip
lier
= 1.
010
)
Double Light Engine (2B30)
Triple Light Engine (3B30)
Quad Light Engine (4B30)
Double Light Engine (2B30)
Triple Light Engine (3B30)
Quad Light Engine (4B30)
270
0K
(M
ulti
plie
r =
0.8
84)
Double Light Engine (2B30)
Triple Light Engine (3B30)
Quad Light Engine (4B30)
MTR Square Bollard LED Lumen Matrix
Single Light Engine (1B30)
Triple Light Engine (3B30)
Double Light Engine (2B30)
Single Light Engine (1B30)
Single Light Engine (1B30)
Quad Light Engine (4B30)
Single Light Engine (1B30)
300
0K
(M
ulti
plie
r =
0.9
42)
GFCI Receptacle (REC) 120V 15A GFCI duplex receptacle with weather-proof, self-closing cover; located 36” (915mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be con-nected to outlet only when attended by operating personnel.
Optional Accessories
(REC) GFCI RECEPTACLE DETAIL (120V)
(REC2) PADLOCKABLE IN-USE GFCI RECEPTACLE DETAIL (120V)2 3/4”(70mm)
4 1/2” (114mm)
Cover show in closed position
Pole (Generic View)
5/8”(15mm)
GFCI Receptacle (REC2) 120V 15A GFCI duplex receptacle with weather-proof, self-closing, padlockable in-use cover; located 36” (915mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel.
(REC) GFCI RECEPTACLE DETAIL (120V)
(REC2) PADLOCKABLE IN-USE GFCI RECEPTACLE DETAIL (120V)
3 9/16” (91mm)
6 11/16” (170mm)
Cover shown in the closed position
2 1/4” (58mm)
Pole (Generic View)