An ISO 9001 : 2008 Certified Company

10, Gondwara, Industrial Area, Urla, Raipur (C.G.) India.Website - ultraaluminium.com. email : id - mail@ultraaluminium.com

Contact Mob. No. 07389906156, Fax No. 0771-4056605

10, Gondwara, Industrial Area, Urla, Raipur (C.G.) India.Website - ultraaluminium.com. email : id - mail@ultraaluminium.com

Contact Mob. No. 07389906156, Fax No. 0771-4056605

M/s. ULTRA ALUMINIUM PVT LTD.

Aluminium Extrusion & Colour Anodize Unit

General Terms and Conditions for Domestic Sale

Delivery Schedule – The material is delivered usually within 1 week for existing dies and 4 weeks case ofnew dies, form the date of acceptance of the order and needs to be confirmed at the time of ordering.

Payment Terms – 30% Advance along with order and balance before dispatch of material. All payment are tobe made by means of RTGS/NEFT or Demand Draft drawn of M/s Ultra aluminium Pvt Ltd, payable atRaipur. All bank charges are borne by the buyer.

Inspection and rejection – Inspection of the goods can be carried out at the premises of UAPL prior todispatch.

Packing – Packing charges depending on the mode of packing would be extra, as applicable. We offerpolythene tube and special packing as per customer requirement.

Transportation – The material ordered can be dispatched through the transport designated by the customer.However, in the absence of such instruction, the goods are dispatched through any reputed transporters onfreight to pay basis.

Change of Order – Any variation or cancellation pertaining to the purchase order should be intimated well inadvance, prior to the date of delivery, provided the item has not been extruded. The buyer shall be liable tocompensate the company any loss incurred by way of such alteration/cancellation of the order.

Indemnity – The buyer shall indemnify the company against all damages, penalties, costs and expenses towhich the company may become liable to as a result of work done according to the buyer’s specification,involving the infringement of letters or registered design/ trademarks/patents.

Warranty – No warranty, expressed or implied is given as to the life or wear and tear of the goods supplied,nor is it stated that they will be fit for any particular purpose or for use under any specified condition notwithstanding that such purpose or condition may be known to the company.

Demurrage – All demurrage charges incurred due to non-clearance of material on time after ists arrival at thedestination or for any other reason shall be borne by the buyer.

Jurisdiction – All contracts between the buyers and the company are deemed to be entered into at Raipur \and therefore are subject to the jurisdiction of courts at Raipur.

General – Any order placed with UAPL against any quotation implies that the customer has read andaccepted the specified terms and conditions. At the time of placing the order

Terms and Conditions For Developing New Dies- General

* New dies can be developed against security for new Die (SND) to be deposited by the customer.* The amount of (Security for new Die) SND will vary depending on the type of profiles and whether the die has to be kept exclusive to the buyer. The exact SND will be informed while submitting the offer.* The SND would be refunded to the buyer if the stipulated minimum quantity of extrusions is bought within a stipulated period. If the minimum stipulated quantity is not taken within the stipulated period, the SND would be forfeited.* The minimum first lot supply for any new dies is 200/500/1000kg, depending on the profile.

22 M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.) 1M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.)

UAPLUAPL

22 M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.) 1M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.)

UAPLUAPL

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 SP101 38.1 25.24 1.0 1.000-1.200kg2 SP102 38.1 25.24 1.2 1.500-1.700kg3 SP103 38.1 25.24 1.5 1.800-2.000kg4 SP1045 SP105 50 25 1.0 1.200-1.400kg6 SP106 50 25 1.2 1.500-1.700kg7 SP107 50 25 1.5 2.000-2.200kg8 SP108 50 25 2.0 2.800-3.000kg9 SP109 50 25 3.0 4.000-4.200kg10 SP11011 SP111 63.5 38.1 1.0 1.800-2.000kg12 SP112 63.5 38.1 1.2 2.400-2.600kg13 SP113 63.5 38.1 1.5 2.800-3.000kg14 SP114 63.5 38.1 2.0 3.800-4.000kg15 SP11516 SP116 72 24 1.0 1.600-1.800kg17 SP117 72 24 1.2 2.200-2.400kg18 SP118 98 24 1.0 2.400-2.600kg19 SP119 98 24 1.2 2.800-3.000kg20 SP120 98 24 1.5 3.500-3.700kg21 SP121 101 44.45 1.5 4.100-4.300kg22 SP122 101 44.45 2.0 5.000-5200kg23 SP123 101 44 3.0 8.800-9000kg

SIZE IN MM

RECTANGULAR TUBES

SR. SECTION WEIGHT RANGENO. NO. A A T KGS/12'1 SP124 25 25 1.0 0.800-1.0002 SP1253 SP126 38 38 1.0 1.400-1.6004 SP127 38 38 1.2 1.800-2.0005 SP128 38 38 1.5 2.300-2.5006 SP129 38 38 2.0 3.000-3.2007 SP130 50 50 1.0 1.900-2.1008 SP131 50 50 1.2 2.300-2.5009 SP132 50 50 1.5 2.800-3.00010 SP133 50 50 2.0 3.800-4.000

SIZE IN MM

SQUARE TUBES

STANDARD PROFILES

Sr. No.

01

02

03

04

05

06

07

08

09

10

.

Standard Profiles

Partition Systems

Door Profiles

18 mm Window Series

20 mm Window Series

25 mm Window Series

25 mm Window (Domal) Series

Ladder Profiles

Solar Profiles

Casement (openable) Window Series

Profile Series Name Page No.

01- 05

06-08

09-11

12-14

15-16

17-18

19-20

21-21

22-22

23-23

INTEX

10, Gondwara, Industrial Area, Urla, Raipur (CG) INDIA

Website : ultraaluminium.com, Email : mail@ultraaluminium.com

Contact Details

Mob. No. 07389906156

07879359871

Fax No. 0771-4056605

Ultra Aluminium Pvt. Ltd.

Marketing

Mob. No. 07389906151

07389906155

2 M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.) 3M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.)

UAPLUAPL

CURTAIN WALL

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SP134 45 45 1.2 2.200-2.400

2 SP135 50 50 1.5 3.200-3.400

SIZE IN MM

ROUND PIPE 19 MM

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SP136 19 17 0.6 0.400-0.500

2 SP137 19 17 1.0 0.500-0.600

3 SP138 36 24 6.0 5.550-6.000

SIZE IN MM

Round Pipe Fluted 24mm

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SP139 24 22 0.9 0.700-0.800

2 SP140 24 21 1.7 1.200-1.300

SIZE IN MM

STANDARD PROFILES

EQUAL/UNEQUAL ANGLE

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 SP141 18 18 1.5 0.500-0.7002 SP142 18 18 3.0 1.000-1.2003 SP143 25 25 0.9 0.400-0.4504 SP144 25 25 3.0 1.000-1.2005 SP145 38 25 3.0 1.700-2.0006 SP146 38 25 1.5 0.900-1.1007 SP147 38 25 2.5 1.500-1.7008 SP148 50 50 3.0 2.800-3.000

SIZE IN MM

BULB TEE

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 SP149 25 25 0.9 0.400-0.6002 SP150 25 25 1.0 0.600-0.8003 SP151 25 25 1.3 0.700-0.9004 SP152 25 25 1.5 0.600-0.8005 SP153 25 25 1.5 0.900-1.0006 SP154 38.1 25.4 1.0 0.700-0.900

SIZE IN MM

U CHANNEL

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 SP156 9 9 0.6 0.150-0.1902 SP157 12 12 0.7 0.150-0.2503 SP158 100 50 6.0 14.000-15.000

SIZE IN MM

DOUBLE GLASS CHANNEL

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 SP159 22 11 0.6 0.300-0.4002 SP160 22 11 0.9 0.400-0.5003 SP161 22 11 1.0 0.500-0.6004 SP162 25 11 0.9 0.500-0.550

SIZE IN MM

STANDARD PROFILES

4 M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.) 5M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.)

UAPLUAPL

SYNTEX -C

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SP163 24 22 0.5 0.400-0.500

2 SP164

SIZE IN MM

Door Closer

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SP169 40 36 12.0 8.000-9.000

2 SP170

SIZE IN MM

G-SECTION

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SP165 18 18 1.5 2.300-2.600

2 SP166

SIZE IN MM

LOUVER SECTION

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SP167 38 33 1.3 0.800-1.000

2 SP168

SIZE IN MM

STANDARD PROFILES STANDARD PROFILES

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SP173 25 3.0 0.750-0.950

2 SP174 25 6.0 1.400-1.600

3 SP175 25 10 2.400-2.600

4 SP176 30 10 2.900-3.100

5 SP177 40 6.0 2.400-2.600

6 SP178 40 10 3.900-4.100

7 SP179 50 2.0 1.000-1.200

8 SP180 50 10 4.900-5.100

9 SP181 50 12 5.900-6.100

10 SP182 60 10 5.900-6.100

11 SP183

12 SP184 70 10 6.900-7.100

13 SP185 75 12 8.900-9.100

14 SP186 80 10 7.900-8100

15 SP187 100 10 9.900-10.100

16 SP188 100 12 11.900-12.100

17 SP189 100 20 19.800-20.000

18 SP190 120 10 11.900-12.100

19 SP191 150 10 14.800-15.000

20 SP192 150 12 17.800-18.000

SIZE IN MM

Hexagonal Bar

Flat Bar

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SP171 25 0 0.0 5.000-9.000

2 SP172

SIZE IN MM

SINGAL PARTITION

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 PS101 50 25 1.0 1.300-1.5002 PS1023 PS1034 PS104 63.5 38.1 1.0 1.900-2.1005 PS105 63.5 38.1 1.2 2.500-2.7006 PS106 63.5 38.1 1.5 3.000-3.2007 PS107 63.5 38.1 2.0 4.000-4.2008 PS108 63.5 38.1 3.0 5.900-6.2009 PS10910 PS110 100 44 1.2 3.800-4.00011 PS111 100 44 1.5 4.400-4.60012 PS112 100 44 2.0 6.000-6.40013 PS113 100 44 3.0 8.400-8.80014 PS114

SIZE IN MM

DOUBLE PARTITION

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 PS115 50 25 1.0 1.300-1.5002 PS1163 PS1174 PS118 63.5 38.1 1.0 2.000-2.2005 PS119 63.5 38.1 1.2 2.500-2.7006 PS119 63.5 38.1 1.5 3.100-3.3007 PS120 63.5 38.1 2.0 4.200-4.4008 PS121 63.5 38.1 3.0 6.000-6.4009 PS12210 PS123 100 44 1.2 3.800-4.00011 PS124 100 44 1.5 4.600-4.80012 PS125 100 44 2.0 6.000-6.40013 PS126 100 44 3.0 8.500-8.900

14 PS127

SIZE IN MM

6 M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.) 7M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.)

UAPLUAPL

LEG PARTITION

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 PS128 64 49 1.2 0.900-1.0002 PS129

SIZE IN MM

GLAZING CLIP

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 PS130 19 17 0.7 .240-.2902 PS131 19 17 0.8 .300-.3503 PS132 19 17 0.9 .350-.4004 PS133 19 17 1.0 .400-.4505 PS134

SIZE IN MM

GLAZING PLATE

L PIPE

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 PS138 45 24 1.0 1.100-1.3002 PS139

SIZE IN MM

PARTITION SYSTEM PARTITION SYSTEM

8 M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.) 9M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.)

UAPLUAPL

MEETING

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 PS140 80 18 1.0 2.200-2.4002 PS141

SIZE IN MM

L PIPE

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 PS142 37 24.3 1.0 1.000-1.2002 PS143

SIZE IN MM

PARTITION SYSTEM DOOR PROFILES

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/15'1 DP101 47.5 44.45 1.0 2.800-3.0002 DP102 47.5 44.45 1.5 3.600-3.8003 DP103 47.5 44.45 2.0 4.800-5.0004 DP104 47.5 44.45 3.0 6.700-7.0005 DP1056 DP106 83.5 44.45 1.5 5.000-5.2007 DP107 83.5 44.45 2.0 6.400-6.6008 DP108 83.5 44.45 3.0 9.500-10.0009 DP109

SIZE IN MM

DOOR MIDDLE / DOOR TOP

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 DP110 47.5 44.45 1.2 2.200-2.4002 DP111 47.5 44.45 1.5 2.800-3.0003 DP1124 DP113 83.5 44.45 1.5 3.900-4.2005 DP114

SIZE IN MM

DOOR VERTICAL

DOOR MIDDLE

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 DP115 47 44 1.0 2.200-2.4002 DP116 47 44 1.2 2.500-2.7003 DP117 47 44 1.5 3.000-3.2004 DP118 47 44 2.0 3.700-4.0005 DP119 47 44 3.0 5.400-5.7006 DP1207 DP121 83.05 44.45 1.5 4.000-4.2008 DP122 83.05 44.45 2.0 5.200-5.5009 DP123 83.05 44.45 3.0 7.400-7.70010 DP12411 DP125

SIZE IN MM

10 M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.) 11M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.)

UAPLUAPL

SINTEX A (without Grow)

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 DP140 40 24 0.6 0.700-0.900

SIZE IN MM

SINTEX H

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 DP141 40 24 0.8 1.200-1.4002 DP142

SIZE IN MM

DOOR PROFILES

DOOR TOP & BOTTOM

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 DP126 47.5 44.45 1.2 2.200-2.4002 DP127 47.5 44.45 1.5 2.800-3.0003 DP128 47.5 44.45 2.0 3.600-3.8004 DP129 47.5 44.45 3.0 5.200-5.5005 DP1306 DP131 83.05 44.45 1.5 4.000-4.2007 DP132 83.05 44.45 2.0 5.000-5.2008 DP133 83.05 44.45 3.0 7.300-7.7009 DP13410 DP135 114 44.45 1.2 3.900-4.10011 DP136 144 44.45 1.5 4.800-5.00012 DP137 144 44.45 2.0 6.100-6.60013 DP138 144 44.45 3.0 9.000-9.500

SIZE IN MM

SINTEX A (with Grow)

DOOR FRAME

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 DP143 45 35 1.2 1.500-1.700

SIZE IN MM

JUMBO SECTION

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 DP144 88 40 2.2 9.000-9.5002 DP145

SIZE IN MM

DOOR PROFILES

12 M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.) 13M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.)

UAPLUAPL

18 MM SLIDING WINDOW

TOP BOTTOM

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW109 40 18 1.0 1.000-1.200

2 SW110 40 18 1.2 1.400-1600

3 SW111 40 18 1.5 2.000-2.200

4 SW112

SIZE IN MM

HANDALE

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW101 40 18 1.0 1.000-1.200

2 SW102 40 18 1.2 1.400-1.600

3 SW103 40 18 1.5 2.00-2.200

4 SW104

SIZE IN MM

INTER LOCK

SR. SECTION SIZE IN MM WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW105 40 18 1.0 1.200-1.400

2 SW106 40 18 1.2 1.600-1.800

3 SW107 40 18 1.5 2.100-2.300

4 SW108

18 MM SLIDING WINDOW

2 TRACK BOTTOM

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW122 62 32 1.0 1.800-2.000

2 SW123 62 32 1.2 2.400-2.600

3 SW124 62 32 1.5 3.000-3.200

4 SW125

SIZE IN MM

BEARING TOP BOTTOM

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 SW113 60 18 1.0 1.200-1.4002 SW114

SIZE IN MM

BEARING TOP BOTTOM

SR. SECTION SIZE IN MM WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW115 51 18 1.2 1.500-1.700

2 SW116

2 TRACK TOP

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW117 62 32 1.0 1.700-1.900

2 SW118 62 32 1.2 2.300-2.500

3 SW119 62 32 1.5 2.800-3.000

4 SW120

5 SW121

SIZE IN MM

14 M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.) 15M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.)

UAPLUAPL18 MM SLIDING WINDOW

4 TRACK BOTTOM

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW136 122 32 1.0 4.000-4.200

2 SW137

SIZE IN MM

3 TRACK TOP

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW126 92 32 1.0 2.500-2.700

2 SW127 92 32 1.1 3.000-3.200

3 SW128 92 32 1.5 4.000-4.200

4 SW129

SIZE IN MM

3 TRACK BOTTOM

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW130 92 32 1.0 2.600-2.800

2 SW131 92 32 1.1 3.100-3.300

3 SW132 92 32 1.5 4.200-4.400

4 SW133

SIZE IN MM

4 TRACK TOP

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW134 122 32 1.0 3.800-4.000

2 SW135

SIZE IN MM

20 MM SLIDING WINDOW

HANDLE

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW138 38 20 1.0 1.000-1.200

2 SW139 38 20 1.2 1.400-1.600

3 SW140 38 20 1.5 1.800-2.000

SIZE IN MM

INTER LOCK

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW141 38 20 1.0 1.400-1.600

2 SW142 38 20 1.2 1.800-2.000

3 SW143 38 20 1.5 2.200-2.400

SIZE IN MM

TOP BOTTOM

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 SW144 41 20 1.0 1.000-1.2002 SW145 41 20 1.2 1.400-1.6003 SW146 41 20 1.5 1.800-2.000

SIZE IN MM

16 M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.) 17M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.)

UAPLUAPL

3 TRACK BOTTOM

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW156 92 20 1.0 3.000-3.200

2 SW157 92 20 1.2 3.600-3.800

3 SW158 92 20 1.5 4.400-4.600

SIZE IN MM

3 TRACK TOP

20 MM SLIDING WINDOW

2 TRACK TOP

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW147 62 20 1.0 1.700-1.900

2 SW148 62 20 1.2 2.300-2.500

3 SW149 62 20 1.5 2.800-3.000

SIZE IN MM

2 TRACK BOTTOM

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 SW150 62 20 1.0 2.000-2.2002 SW151 62 20 1.2 2.700-2.9003 SW152 62 20 1.5 3.200-3.400

SIZE IN MM

25 MM SLIDING WINDOW

HANDAL SECTION

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW159 50.5 25 1.0 1.600-1.800

2 SW160 50 25 1.2 2.000-2.200

3 SW161

SIZE IN MM

INTER LOCK

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 SW162 50 25 1.3 2.300-2.5002 SW163

SIZE IN MM

BEARING BOTTOM

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 SW164 60 25 1.45 2500-27002 SW165

SIZE IN MM

18 M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.) 19M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.)

UAPLUAPL

3 TRACK TOP

2 TRACK BOTAM

2 TRACK TOP

25 MM SLIDING WINDOW 25 MM UPVC SLIDING SERIES (DOMAL)

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 SW170 116 25 1.3 3.000-3.2002 SW171

SIZE IN MM

3 TRACK BOTTOM

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 SW172 116 25 1.3 3.500-3.7002 SW173

SIZE IN MM

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 SW166 75 25.4 1.3 2.400-2.6002 SW167

SIZE IN MM

2 TRACK BOTTOM

SR. SECTION WEIGHT RANGENO. NO. A B T KGS/12'1 SW168 75 25.4 1.25 2.200-2.4002 SW169

SIZE IN MM

HANDLE /TOP BOTTOM

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW174 60 22 1.2 2.800-3.000

2 SW175

SIZE IN MM

3 TRACK

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW176 100 46 1.2 6.000-6.200

2 SW177

SIZE IN MM

CLIP

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW178 27 33 1.0 0.800-1.000

SIZE IN MM

20 M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.) 21M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.)

UAPLUAPL

HANDLE/TOP BOTTOM

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW181 65 27 1.5 3.000-3.200

2 SW182

SIZE IN MM

CLIP

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW183 27 33 1.0 0.800-1.000

2 SW184 65 22 1.5 3.200-3.400

SIZE IN MM

3 TRACK TOP WITH GROOVE

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SW179 93 41 1.5 5.600-5.800

2 SW180

SIZE IN MM

25 MM UPVC SLIDING SERIES (DOMAL) LODDER PROFILES

LADDER 3 (FLUTED)

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/20'

1 LP105 24 21 1.5 2.000-2.200

SIZE IN MM

LADDER 1

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/20'

1 LP101 66 32 1.5 3.500-4.000

2 LP102 66 32 2.5 5.000-5.500

3 LP103 66 32 3.0 5.500-6.000

SIZE IN MM

LADDER 2

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/20'

1 LP104 62 31 1.2 1.500-2.000

SIZE IN MM

22 M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.) 23M/s. Ultra Aluminium Pvt. Ltd., 10, Gondwara Industrial Area, Urla, Raipur (C.G.)

UAPLUAPL

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SLP101 36 22 2.0 1.800-2.000

2 SLP102

SIZE IN MM

UAPL

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SLP103 22 20 1.5 1.000-1.200

2 SLP104

SIZE IN MM

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 SLP105 40 40 2.5 2.500-2.700

SIZE IN MM

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 CW101 42 38 1.20 2.300-2.500

SIZE IN MM

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 CW102 42 38 1.20 1.400-1.600

SIZE IN MM

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 CW103 28 10 1.20 0.800-1.000

SIZE IN MM

SR. SECTION WEIGHT RANGE

NO. NO. A B T KGS/12'

1 CW103 28 10 1.20 0.800-1.000

SIZE IN MM

SOLLAR PROFILES CASEMENT WINDOW SERIES