mpc - miracote€¦ · ¥ food & beverage areas ¥ hotels and resorts ¥ mechanical equipment...
TRANSCRIPT
MPCTwo-component, polymer-modified, cementitious Multipurpose Protective Coating
MPC (Multipurpose Protective Coating) is an extremely durable, cost-
effective and versatile protective coating that is “breathable” and allows for
the transmission of moisture vapor from within concrete and other porous
substrates without blistering or delamination. By lowering internal moisture
content, MPC helps reduce the potential for corrosion of steel reinforcement
in concrete.
Designed for both exterior and interior use, MPC restores and protects
concrete and a variety of other surfaces from the consequences of exposure
to chlorides, water intrusion, carbonation, freeze/thaw, and damage from
impact and abrasion. With MPC a variety of finishes can be achieved to
either restore concrete to a “like new” appearance or provide enhanced
visual interest and curb appeal through a wide range of available colors,
textures and patterns.
Renovate, Waterproof and Protect with the Versatility of MPC
Product Features• Water vapor permeable –
reduces corrosion of rebar
• Excellent adhesion and flexibility on concrete and other substrates
• Prevents intrusion of water, chlorides and carbon dioxide
• Excellent resistance to freeze thaw cycles, impact and abrasion
• Ideal for interior and exterior applications
• Suitable for both pedestrian and vehicular traffic
• Extensive choice of colors and textures – enhanced curb appeal
Crossfield Products Corp. | miracote.com | 800.692.3502 | [email protected]
Miracote MPC is applied in two or more coats by trowel, brush, roller, spray or squeegee to a typical minimum thickness of 1/16” depending on traffic and exposure conditions. Available in a natural gray and white powder blends, Miracote MPC (using white powder) can be integrally colored with Miracote ColorPax LIP pigment packs, stained with the use of our architectural water-based, co-polymer Mirastain, or both pigmented and stained to achieve diverse and unique architectural finishes. Seal and protect your finished MPC surface with a clear Miracote sealer or topcoat of your choice from a wide range of scientifically superior siloxane, acrylic, and polymeric sealer and protective coating technologies from Crossfield
Products Corp.
MPCTwo-component, polymer-modified, cementitious Multipurpose Protective Coating
Don’t replace it – Miracote It! Crossfield Products Corp.miracote.com
800.692.3502
West Coast Facility
3000 E. Harcourt Street
Rancho Dominguez, CA
90221
P: 310.631.6594
F: 310.886.9119
East Coast Facility
140 Valley Road
Roselle Park, NJ
07204
P: 908.245.2808
F: 908.245.0659
Product Applications• Resurface and restore
concrete• Deferred concrete floor
toppings• Commercial, retail &
residential flooring• Educational & institutional
flooring• Food & beverage areas• Hotels and resorts• Mechanical equipment rooms• Raised access floor
waterproofing
Where to Use• Pedestrian walkways• Atriums & courtyards• Driveways & porte-cocheres• Balconies & breezeways• Pool decks and promenades• Plaza decks & topping slabs• Parapets and columns• Walls & vertical surfaces
to learn more about miracote
coatings and membranes