mould chart - dandirandandiran.com/myerson -mould chart master-en.pdfmould type ganymed 2 – cusp...
TRANSCRIPT
For the highest standardsin Denture Aesthetics...
Myerson New Special teeth, made from a specially
formulated acrylic interpenetrating polymer network,
have been designed to meet the needs of both the
dentist and technician. They also meet the patient’s
demand for the highest aesthetics.
Myerson New Special are available in an extensive
selection of moulds and 16 V shades – A1 to D4.
The moulds have been individually characterised by
hand to simulate the appearance of well cared for
natural dentition.
Moulds range from flat to curved with either long or
short ridge laps. Labial carvings range from smooth
to rugged, enabling dental practitioners to suit the
personal characteristics of their most discerning
patients.
MYERSON SPECIAL AESTHETIC ADVANTAGES:
n Natural fluorescence: consistent shade values
under any light conditions.
n Natural translucency and surface lustre:harmonise well with adjacent natural teeth.
n Excellent for partial dentures: natural labial
carvings, irregular incisal edges and long lingual
form.
n High density: Absence of porosity - cleaner,
easier to grind.
n Superior durability: The Special cross linking
formula binds the molecules of resin so closely
together that they are resistant to staining and
wear.
n No discolouration: Myerson Special teeth will not
discolour during or after processing.
n Superbonding: No popouts - perfect bond makes
one-piece denture.
n Resilience: preserves tissue, less brittle - no
breakage - no inprocessing repairs.
Approximal stains Strong surface relief Enamel striaton Darker neck of tooth
Composite filling Decalcification Translucent incisal areas Darker canine teeth
Physical and clinical features of Myerson Special teeth
See thedifference…
a72 49.0
10.4
9.1
(a73)
a64 47.0
9.7
8.6
(a71)
a52 45.8
10.4
8.3
(13)
a43 43.2
9.2
7.9
(12)
a44 45.0
9.9
8.3
(13)
a53 47.0
11.4
8.6
(16)
ym5 43.5
10.4
8.2
(8)
ym3 41.5
9.4
7.9
(11)
yw5 46.8
11.2
8.9
(14)
yw3 45.5
10.2
8.6
(13)
a11 48.0
11.1
8.8
(14)
a9 44.5
10.5
8.0
(8)
a7 43.5
9.9
7.9
(7)
a4 41.4
9.6
7.6
(7)
a13 50.3
12.9
9.3
(16)
a2 40.3
9.5
7.3
(11)
ANTERIOR TEETH
Mould VarietyMyerson Special teeth are available in a wide variety of types and forms thatmake it possible to customise dentures to conform to the personalcharacteristics and facial features of most patients.
Upper Anterior MouldsMyerson anterior teeth are categorized into three mould types:1. ‘A’ or Aesthetic Moulds
• Slender forms with excellent balance between the ridge lap and bite• Subtle labial carving and lifelike blending
2. ‘Y’ or Youthful Moulds• These are similar to A moulds in aesthetic concept except that they have ashorter ridge lap• Beautiful sculpting with a vigorous youthful look• Longer more youthful lingual line• Fewer striations and age related effects than ‘P’ moulds
3. ‘P’ or Prime moulds• Designed for older patients
• Shorter, less sloping ridge laps to help butting the ridge in partial and immediatedentures• Excellent carvings with more pronounced age characteristics, ruggedness andcurvature
Posterior MouldsMyerson offer a choice of posterior teeth to enable the clinician andtechnician to meet the needs of the patient using the ‘least complicatedmethod’ Duratomic1 – cusp angle:30 degreesIndication: Full & Partial dentures
• Shallow cusp occlusal surfaces for natural form, good contacts and easylateral movement
• Fast and easy to set up in balanced occlusion with little or noadjustment after processing
• Simulated abrasion on lower cusps: blends well with natural dentition• Long lingual surfaces: improves comfort and phonetics for patient• Durablend material - Interpenetrating polymer network for exceptionalwear resistance
12 32.9
8.5
4.6
Pm2 41.8
9.0
7.8
(11)
Pm4 43.8
10.0
8.1
(12)
Pm6 45.8
11.0
8.4
(13)
Pm8 47.2
12.0
8.7
(14)
Pw2 46.4
9.8
8.5
(13)
Pw4 47.8
10.8
8.8
(a73)
Pw6 48.5
11.8
9.1
(16)
Pw8 50.0
12.8
9.2
(16)
8 33.1
9.8
5.0
10 34.3
10.1
5.2
11 31.0
8.5
4.4
7 32.0
9.1
4.6
13 34.7
9.8
5.1
3 29.2
9.0
4.4
16 36.7
11.1
5.6
14 34.9
10.8
5.1
K E Y
Aesthetic Youthful Prime
Mould type
GanyMed2 – cusp angle: 30 degreesIndication: Full & Partial dentures
• As for Duratomic with the addition of a Durablend material reinforcedwith sub-micron silica further enhancing their hardness and wearresistance.
MLI3 – Myerson lingualised IntegrationIndication: Implant supported prostheses and full denture cases with aquestionable jaw relation position.
• Specially designed for the lingualised occlusion scheme• Natural facial cusps and uncomplicated mandibular central fossacombines function and aesthetics.
• Fast set up with minimal occlusal reshaping to achieve balancedocclusion.
1 Special Duratomic combine with Myerson Special anterior teeth. Standard Duratomic combine with Characterized and Standardanterior teeth.
2 GanyMed combine with Myerson Special anterior teeth3 MLI combine with Myerson Special anterior teeth
Mould # Combines with mandibular mouldAll measurements in millimetres
17 36.8
12.3
5.6
a63 34.7
8.0
5.4
a71 35.0
9.0
5.2
a73 36.5
9.0
5.5
2827.7 29.1
8.10 7.52
3029.6 30.6
8.54 8.00
3231.6 33.0
9.25 8.45
3433.4 35.0
9.77 8.85
#26
#36
mC31.2 32.3
9.3 8.50
CC30.9 32.3
9.1 8.50
2827.7 29.1
8.1 7.52
A2 40.3 11 31.0 28 27.7 29.1
A4 41.4 7 32.0 28 27.7 29.1
A7 43.5 7 32.0 30 29.6 30.6
A9 44.5 8 33.1 32 31.6 33.0
A11 48.0 14 34.9 34 33.4 35.0
A13 50.3 16 36.7 34 33.4 35.0
A43 43.2 12 32.9 30 29.6 30.6
A44 45.0 13 34.7 32 31.6 33.0
A52 45.8 13 34.7 32 31.6 33.0
A53 47.0 16 36.7 34 33.4 35.0
A64 47.0 A71 35.0 32 31.6 33.0
A72 49.0 A73 36.5 34 33.4 35.0
YM3 41.5 11 31.0 30 29.6 30.6
YM5 43.5 8 33.1 32 31.6 33.0
YW3 45.5 13 34.7 32 31.6 33.0
YW5 46.8 14 34.9 32 31.6 33.0
PM2 41.8 11 31.0 30 29.6 30.6
PM4 43.8 12 32.9 30 29.6 30.6
PM6 45.8 13 34.7 32 31.6 33.0
PM8 47.2 14 34.9 34 33.4 35.0
PW2 46.4 13 34.7 32 31.6 33.0
PW4 47.8 A73 36.5 34 33.4 35.0
PW6 48.5 16 36.7 34 33.4 35.0
PW8 50.0 16 36.7 34 33.4 35.0
POSTERIOR TEETH
MOULD COMBINES WITHANTERIORS ARTICULATED POSTERIOR
WITH LOWER MOULDUPPER LOWER
MOULD A/6 MOULD A/6 MOULD P/4 P/4mm mm mm mm
C O M B I N AT I O N C H A R T
n Special anteriors combine with Special Duratomic, mli or Ganymed posteriorsn Characterized and Standard anteriors combine with Standard Duratomic posteriors
SHADECHART
Myerson Special & Ganymed A1 A2 A3 A3.5 A4 B1 B2 B3 B4 C1 C2 C3 C4 D2 D3 D4ComparableMyerson Characterized Shade1 I H F C B I H E E I 74 C 41 70 71 70
1 Closest colour match available
KEY
Mould #facio-lingualWidth of 4 maxillary posterior teeth
Width of 4 mandibular posterior teeth
facio-lingual
Myerson is a registered trademark of Myerson LLC
0473
The ‘True to Life’ look for all agesAs the demand continues to grow
among older patients for a more
natural look in full or partial dentures,
more and more dental practitioners
are turning to the use of
characterised teeth in their full and
partial denture cases.
Such characterising features are to
be found in Myerson Special teeth
and serve to help the dentist and
technician to achieve a more natural
‘True to Life’ denture.
Many of these irregularities have been individually
added by hand and the
characterisation varies across the
shades i.e. heavier in the darker
shades and gentler in the lighter
shades. The location of fillings and
decalcified areas are added in a
non-symmetrical manner.
Colours and special effects come
from within the tooth rather than on
the surface, which means that the
teeth can be ground and modified
without affecting the shade.
Aestheticallyand functionally designed,
handcrafted teethfrom Myerson
Summary of Myerson Special Characterisation:
n Greater depth of translucent layer and bluish incisal edges.
n Simulated composite fillings.
n Decalcification areas.
n Irregular incisal edges.
n Neck & labial stains in varying degrees of colours.
n Built in lines or striations.
Myerson Special Characterisation
Characterising features and irregularities areindividually added by hand
Myerson Limited8 Crystal Way, Harrow, Middlesex HA1 2HP UKTelephone: +44 (0)20 8863 9044 Facsimile: +44 (0)20 8861 3091e-mail: [email protected] web: www.myersontooth.com