♻ Printed on recycled paper. Printed by authority of the State of Illinois. October 2013 — 100M — DSD X 140.12

For more information about motorcyclelicensing or examination, contact your

local Secretary of State Driver Services facility, or call:

800-252-8980

I l l inoisMotorcycleoperator manual

Currently, there are nearly356,000 licensed motorcycles onIllinois roads, and this number isincreasing every year. Becauseof their size and vulnerability ina crash, it is important to takespecial precautions when ridinga motorcycle. Learning and thenpracticing proper cycling skillscan significantly reduce the riskof an accident.

This Illinois Motorcycle Operator Manual provides infor-mation that will help you learn how to operate yourmotorcycle safely and skillfully. Information needed forthe Illinois Secretary of State motorcycle licenseexams also is included. I hope you will use thisresource not only as a study aid, but as a tool to devel-op your motorcycling skills.

In addition to studying this manual when preparing foryour motorcycle exams, please review the IllinoisRules of the Road booklet. The booklet provides anoverview of important traffic safety laws. Motorcycleriders have the same rights and responsibilities asother motorists. By obeying traffic laws and practicinggood motorcycling skills, you will ensure not only yoursafety but the safety of others who share the road withyou.

Jesse WhiteSecretary of State

1

OverviewMotorcycle Classification . . . . . . . . . . . . 2Instruction Permits. . . . . . . . . . . . . . . . . . 2License Plates . . . . . . . . . . . . . . . . . . . . . 3Motorcycle Traffic Laws . . . . . . . . . . . . . 3

Preparing to RideHelmet Use/Selection . . . . . . . . . . . . . . . 4Eye and Face Protection . . . . . . . . . . . . . 5Clothing . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Know Your Motorcycle and Your ResponsibilitiesBorrowing and Lending. . . . . . . . . . . . . . 6Get Familiar with the Controls . . . . . . . . 6Check Your Motorcycle . . . . . . . . . . . . . . 7Your Responsibilities . . . . . . . . . . . . . . . . 8

Motorcycle Control and OperationBody Position. . . . . . . . . . . . . . . . . . . . . . 9Shifting Gears . . . . . . . . . . . . . . . . . . . . . 9Braking. . . . . . . . . . . . . . . . . . . . . . . . . . 10Turning. . . . . . . . . . . . . . . . . . . . . . . . . . 10Keeping Your Distance . . . . . . . . . . . . . 11Lane Positions . . . . . . . . . . . . . . . . . . . . 11Following Another Vehicle . . . . . . . . . . 12Being Followed . . . . . . . . . . . . . . . . . . . 13Passing and Being Passed . . . . . . . . . . . 13Lane Sharing . . . . . . . . . . . . . . . . . . . . . 14Merging Vehicles . . . . . . . . . . . . . . . . . . 14Vehicles Alongside. . . . . . . . . . . . . . . . . 15SIPDE . . . . . . . . . . . . . . . . . . . . . . . . . . 15Intersections . . . . . . . . . . . . . . . . . . . . . . 16Passing Parked Cars. . . . . . . . . . . . . . . . 18Parking at the Roadside and Curbs . . . . 18

Being SeenClothing . . . . . . . . . . . . . . . . . . . . . . . . . 19Headlight . . . . . . . . . . . . . . . . . . . . . . . . 19Signals . . . . . . . . . . . . . . . . . . . . . . . . . . 19Brake Light . . . . . . . . . . . . . . . . . . . . . . 20Using Your Mirrors . . . . . . . . . . . . . . . . 20Head Checks . . . . . . . . . . . . . . . . . . . . . 21Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Riding at Night . . . . . . . . . . . . . . . . . . . 22

Crash AvoidanceQuick Stops . . . . . . . . . . . . . . . . . . . . . . 22Swerving or Turning Quickly . . . . . . . . 23Cornering . . . . . . . . . . . . . . . . . . . . . . . . 24

Dangerous SurfacesUneven Surfaces and Obstacles. . . . . . . 25Slippery Surfaces . . . . . . . . . . . . . . . . . . 25Tracks and Pavement Seams . . . . . . . . . 27Grooves and Gratings . . . . . . . . . . . . . . 27

Mechanical ProblemsTire Failure. . . . . . . . . . . . . . . . . . . . . . . 27Stuck Throttle . . . . . . . . . . . . . . . . . . . . 28Wobble . . . . . . . . . . . . . . . . . . . . . . . . . . 28Chain Problems . . . . . . . . . . . . . . . . . . . 29Engine Seizure . . . . . . . . . . . . . . . . . . . . 29

ObstaclesAnimals . . . . . . . . . . . . . . . . . . . . . . . . . 29Flying Objects . . . . . . . . . . . . . . . . . . . . 30Getting off the Road . . . . . . . . . . . . . . . 30

Carrying Passengersand CargoEquipment . . . . . . . . . . . . . . . . . . . . . . . 30Instructing Passengers . . . . . . . . . . . . . . 31Riding with Passengers . . . . . . . . . . . . . 31Carrying Loads . . . . . . . . . . . . . . . . . . . 31

Protect Yourself and OthersGroup Riding . . . . . . . . . . . . . . . . . . . . . 32Alcohol and Other Drugs. . . . . . . . . . . . 33Fatigue . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Earning Your MotorcycleLicenseRider Skill Tests. . . . . . . . . . . . . . . . . . . 37Required Equipment . . . . . . . . . . . . . . . 42Knowledge Test —

Sample Questions/Answers . . . . . . . . 44Motorcycle Rider Safety Training

Program Regional Centers . . . . . . . . . 45

Classification CriteriaMotorcycles, Mopeds. . . . . . . . . . . . . . . 46Two-Wheel, and Three-Wheel

Motorcycles . . . . . . . . . . . . . . . . . . . . 47

TABLE OF CONTENTS

2

OVERVIEWMotorcycle ClassificationIllinois driver’s licenses are classified according to the type and weight of thevehicles to be driven. There are two classifications for motorcycle licenses:

Class L: Any motor-driven cycle with lessthan 150cc displacement.

Class M: Any motorcycle or motor-drivencycle.

To obtain a motorcycle classification onyour driver’s license, you must pass aseparate motorcycle examination (seepages 37-42). Drivers ages 16 and 17also must successfully complete amotorcycle training course approved bythe Illinois Department of Transportation(IDOT). Persons age 18 and older who suc-cessfully complete an IDOT MotorcycleRider Education Course are not required topass a written or driving examination at aDriver Services facility. The IDOT coursecompletion card is valid for one year.

Instruction PermitsMotor-Driven Cycle — Persons ages 16 and 17 who havesuccessfully completed driver education and passed the motorcycle written testmay apply for a 24-month instruction permit to operate a motor-driven cycle(under 150cc). The permit allows driving only during daylight hours, under thedirect supervision of a licensed motor-driven cycle operator age 21 or older withat least one year driving experience.

Motorcycle — Persons age 18 or older may apply for a 12-month instruction per-mit to operate a motorcycle other than a motor-driven cycle. The permit allowsdriving only during daylight hours, under the direct supervision of a licensed motor-cycle operator age 21 or older with at least one year driving experience. A 24-monthinstruction permit for a Class M license may be issued to an applicant under age 18only after successful completion of an approved driver education course and suc-cessful completion of an IDOT Motorcycle Rider Education Course.

Rental/Out-of-State Drivers — A person must have a valid driver’s licensewith the appropriate motorcycle classification to rent a motorcycle or motor-driv-en cycle. Out-of-state drivers may drive for the period during which they are in

Illinois, provided they have a valid driver’s license for motorcycle operation fromtheir home state or country.

Moped Operators — Mopeds are low-speed, two-wheeled vehicles. They can bepedaled like a bicycle or driven like a motorcycle. Mopeds are intended for lim-ited use on public roadways. Moped drivers must carry a valid driver’s licenseand obey all signs, signals and traffic laws. If the moped meets all four criterialisted on page 46, the moped operator is not required to obtain a motor-drivencycle classification.

License PlatesAll motorcycles and motor-driven cycles must have a license plate when operat-ed on streets or highways. Different license plate series are assigned to motorcy-cles and motor-driven cycles; therefore, the correct piston displacement mustappear on your license plate registration application. If trading from one classifi-cation to another (less than 150cc or 150cc and over), the license plate must besent to the Secretary of State, along with applications for transfer, title and theappropriate fee.

Motorcycle Traffic LawsMotorcycle drivers must obey all traffic laws, signs and signals in the same wayas other drivers. Motorcycle drivers are prohibited from passing between twoother vehicles going in the same direction unless there is an unobstructed trafficlane available to permit such passing safely. They also are prohibited from pass-ing on the right unless there is unobstructed pavement at least 8-feet wide to theright of the vehicle being passed. A person who operates a motorcycle on onewheel is guilty of reckless driving or aggravated operating of a motorcycle on onewheel. Motorcycles may proceed through a red light that fails to change to agreen light within a reasonable period of time not less than 120 seconds.

PREPARING TO RIDEBefore taking off on any trip, a safe rider makes a point to: • Wear the right gear. • Become familiar with the motorcycle.• Check the motorcycle equipment.• Be a responsible rider.

3

You have a far better chance of avoiding serious injury in a crash if you wear:• Helmet (A helmet is not required under Illinois law; however, a rider who

wears a properly fitted helmet greatly reduces the chance of a fatal head injuryin an accident.)

• Face or eye protection, and• Protective clothing.

Helmet Use/SelectionMotorcycle crashes are common, particularly among beginning riders. One out ofevery five motorcycle crashes results in head or neck injuries. Crash analysesshow that head and neck injuries account for a majority of serious and fatalinjuries to motorcyclists. Research also shows that, with few exceptions, headand neck injuries are reduced by the proper wearing of an approved helmet.

Some riders do not wear helmets because they think helmets will limit their viewto the sides. Others wear helmets only on long trips or when riding at high speeds.Following are some facts to consider:• An approved helmet lets you see as far to the sides as necessary. A study of

more than 900 motorcycle crashes, where 40 percent of the riders wore hel-mets, did not find even one case in which a helmet kept a rider from spottingdanger.

• Most crashes happen on short trips (less than five miles long), just a few min-utes after starting out.

• Most riders are riding slower than 30 mph when a crash occurs. At thesespeeds, helmets can cut both the number and the severity of head injuries byhalf.

No matter what the speed, helmeted riders are three times more likely to survivehead injuries than those not wearing helmets at the time of the crash.

There are two primary types of hel-mets providing two levels of cover-age: three-quarter and full face. Youget the most protection by makingsure that any helmet:• Meets U.S. Department of Trans -

portation and state standards. • Fits snugly all the way around.• Has no obvious defects, such as

cracks, loose padding or frayedstraps.

Whatever helmet you wear, keep it securely fastened on your head when you ride.Otherwise, if you are involved in a crash, it is likely to fly off your head.

Helmets

4

Eye and Face ProtectionA plastic, shatter-resistant faceshield can help protect your whole face in a crash.It also protects you from wind, dust, dirt, rain, insects and pebbles thrown fromcars ahead. These problems are distracting and can be painful, and divert yourattention from concentrating on the road.

Goggles protect your eyes, although they will not protect the rest of your face likea faceshield does. A windshield is not a substitute for a faceshield or goggles.Most windshields will not protect your eyes from the wind. Neither will eyeglass-es or sunglasses. Glasses will not keep your eyes from watering and they mayblow off when you turn your head while riding.

To be effective, eye or faceshield protection must:• Be free of scratches.• Be resistant to penetration.• Give a clear view to either side.• Fasten securely so it does not blow off.• Permit air to pass through to reduce fogging.• Permit enough room for eyeglasses or sunglasses, if needed.

Tinted eye protection should not be worn at night or any other time when littlelight is available.

ClothingThe right clothing protects you in a crash. It also provides comfort as well as pro-tection from heat, cold, debris, and hot and moving parts of the motorcycle.• Jacket and pants should cover arms and legs completely. They should fit

snugly enough to keep from flapping in the wind, yet loosely enough to movefreely. Leather offers the most protection. Sturdy synthetic material also pro-vides a lot of protection. Wear a jacket even in warm weather to prevent dehy-dration. Many are designed to protect without getting you overheated, even onsummer days.

• Boots or shoes should behigh and sturdy enough tocover your ankles and givethem support. Soles shouldbe made of hard, durable,slip-resistant material. Keepheels short so they do notcatch on rough surfaces.Tuck in laces so they won’tcatch on your motorcycle.

• Gloves allow a better grip and

a. Is not necessary if you have awindshield.

b. Only protects your eyes.c. Helps protect your whole face.d. Does not protect your face as

well as goggles.Answer — page 44

1 A plastic, shatter-resistant face shield:

5

help protect your hands in a crash. Your gloves should be made of leather orsimilar durable material.

In cold or wet weather, your clothes should keep you warm and dry, as well asprotect you from injury. Riding for long periods in cold weather can cause severechill and fatigue. A winter jacket should resist wind and fit snugly at the neck,wrists and waist. Good-quality rainsuits designed for motorcycle riding resisttearing apart or ballooning up at high speeds.

KNOW YOUR MOTORCYCLEAND YOUR RESPONSIBILITIESMany things on the highway can cause you trouble. Your motorcycle should notbe one of them. To make sure your motorcycle won’t let you down:• Read the owner’s manual first.• Start with the right motorcycle for you. Your motorcycle should fit you. Your

feet should reach the ground while you are seated on the motorcycle.• Be familiar with the motorcycle controls.• Check the motorcycle before every ride.• Keep it in safe riding condition between rides.• Avoid add-ons and modifications that make your motorcycle harder to handle.

Borrowing and LendingBorrowers and lenders of motorcycles beware. Crashes are fairly common amongbeginning riders, especially in the first months of riding. Riding an unfamiliarmotorcycle adds to the problem. If you borrow a motorcycle, get familiar with itin a controlled area. And if you lend your motorcycle out, make sure the driver islicensed and knows how to ride.

No matter how experienced you may be, ride extra carefully on any motorcyclethat is new or unfamiliar to you. More than half of all crashes occur on motorcy-cles ridden by the operator with less than six months of experience.

Get Familiar with theControlsFamiliarize yourself complete-ly with the motorcycle andreview the owner’s manualbefore you take the motorcycleout on the street (see diagramon page 7). This is particularlyimportant if you are riding aborrowed motorcycle.

2 More than half of allcrashes:

a. Occur at speeds greater than 35mph.

b. Happen at night.c. Are caused by worn tires.d. Involve riders who have ridden their

motorcycles less than six months.Answer — page 44

6

If you are going to use an unfamiliar motorcycle:• Make all the checks you would on your own motorcycle.• Find out where everything is, particularly the turn signals,

horn, headlight switch, fuel-control valve and engine cut-off switch. Find andoperate these items without having to look for them.

• Know the gear pattern. Work the throttle, clutch and brakes a few times beforeyou start riding. All controls react a little differently.

• Ride very cautiously and be aware of your surroundings. • Accelerate gently, take turns more slowly and leave extra room for stopping.

Check Your MotorcycleA motorcycle needs more frequent attention than a car. If something is wrong withthe motorcycle, you will want to find out about it before you get in traffic. Make acomplete check of your motorcycle before every ride. Before mounting the motor-cycle, make the following checks:• Tires — Air pressure, general wear and tread.• Fluids — Oil and fluid levels. At a minimum, check hydraulic fluids and

coolants weekly. Look under the motorcycle for signs of an oil or gas leak.• Headlights and Taillight — Test your switch to make sure both high and low

beams are working.

Light Switch(High-Low)

ElectricStart Button

ThrottleEngine Cut-Off Switch

Left TurnSignal Switch

Right Turn Signal Switch

Gear Change Lever

Rear Brake Pedal

Kick Starter(if equipped)

Fuel Supply Valve

ClutchLever

Front BrakeLever

Tachometer(if equipped)

Speedometerand Odometer

Ignition Key

Horn

Motorcycle Controls

7

• Turn Signals — Turn on both turn signals. Make sure all lights are workingproperly.

• Brake Light — Try both brake controls, and make sure each one turns on thebrake light.

Once you have mounted the motorcycle, complete the following checks beforestarting out:• Clutch and Throttle — Make sure they work smoothly. The throttle should

snap back when you let go. The clutch should feel tight and smooth.• Mirrors — Clean and adjust both mirrors before starting. It is difficult to ride

with one hand while you try to adjust a mirror. Adjust each mirror so you cansee the lane behind you and as much as possible of the lane next to you. Whenproperly adjusted, a mirror may show the edge of your arm or shoulder, but itis the road behind and to the side that is most important.

• Brakes — Try the front and rear brake levers one at a time. Make sure eachone feels firm and holds the motorcycle when the brake is fully applied.

• Horn — Try the horn to make sure it works.

In addition to the checks you should make before every trip, check the followingitems at least once a week: wheels, cables, fasteners and fluids. Follow yourowner’s manual for recommendations.

Your ResponsibilitiesAs a motorcycle rider, you cannot be sure that other motorists will see you oryield the right of way. To lessen your risk of a crash:• Be visible — wear proper clothing, use your headlight, ride in the best lane

position to see and be seen.• Communicate your intentions — use the proper signals, brake light and lane

position.• Maintain an adequate space cushion — following, being followed, lane

sharing, passing and being passed.• Scan your path of travel 12 seconds ahead.• Identify and separate multiple hazards.• Be prepared to act — remain alert and know how to carry out proper crash-

avoidance skills.

The ability to ride aware, make critical decisions and carry them out separatesresponsible riders from all the rest. Remember, it is up to you to keep from beingthe cause of, or an unprepared participant in, any crash.

MOTORCYCLE CONTROL AND OPERATIONThis manual cannot teach you how to control direction, speed or balance. Thoseare things you can learn only through practice. But control begins with knowing

8

your abilities and riding within them, along with knowing and obeying the rulesof the road.

Body PositionTo control a motorcycle well, follow these guidelines:• Posture — Sit so you can use your arms to steer the motorcycle rather than to

hold yourself up.• Seat — Sit far enough forward so your arms are slightly bent when you hold the

handlegrips so you press on the handlebars without having to stretch.• Hands — Hold the handlegrips

firmly to keep your grip over roughsurfaces. Start with your right wristflat. This will help you keep fromaccidentally using too much throt-tle. Also, adjust the handlebars soyour hands are even with or belowyour elbows in order to use theproper muscles for precision steer-ing.

• Knees — Keep your knees againstthe gas tank to help you keep yourbalance as the motorcycle turns.

• Feet — Keep your feet firmly on the footpegs to maintain balance. Do not dragyour feet. If your foot catches on something, you could be injured and it couldaffect your control of the motorcycle. Keep your feet near the controls so you canget to them fast if needed. Also, don’t let your toes point downward — they mayget caught between the road and the footpegs.

Shifting GearsThere is more to shifting gears than simply getting the motorcycle to pick upspeed smoothly. Learning to use the gears when downshifting, turning or startingon hills is important for safe motorcycle operation.• Shift down through the gears with the clutch as you slow or stop. Remain in first

gear while you are stopped so you can move out quickly if you need to.• Make certain you are riding slowly enough when you shift into a lower gear.

If not, the motorcycle will lurch and the rear wheel may skid.• Use the brakes to slow enough before downshifting when riding downhill or

shifting into first gear. Work toward a smooth, even clutch release, especiallywhen downshifting.

• It is best to change gears before entering a turn. However, sometimes shiftingwhile in the turn is necessary. If so, remember to do so smoothly. A sudden changein power to the rear wheel may cause a skid.

Holding Handlegrips

RIGHT

WRONG

9

BrakingYour motorcycle has two brakes: one each for the front and rear wheel. Use bothof them at the same time. The front brake is more powerful and can provide atleast three-quarters of your total stopping power. The front brake is safe to use ifused properly.

• Use both brakes every time you slow or stop. Using both brakes for even nor-mal stops will permit you to develop the proper habit or skill of using bothbrakes properly in an emergency. Squeeze the front brake and press down onthe rear. Grabbing at the front brake or jamming down on the rear can causethe brakes to lock, resulting in control problems.

• If you know the technique, using both brakes in a turn is possible, although itshould be done very carefully. When leaning the motorcycle some of the trac-tion is used for cornering; less traction is available for stopping. A skid canoccur if you apply too much brake. Also, using the front brake incorrectly ona slippery surface may be hazardous. Use caution and squeeze the brake lever— never grab.

• Some motorcycles have integrated braking systems that link the front and rearbrakes together by applying the rear brake pedal. (Consult the owner’s manu-al for a detailed explanation on the operation and effective use of these sys-tems.)

TurningApproach turns and curves with caution. Riders often try to take curves or turns toofast. When they can’t hold the turn, they end up crossing into another lane of trafficor going off the road. Or, they overreact and brake too hard, causing a skid and lossof control. Use the following four steps for better control:1. SLOW — Reduce speed before the turn by closing the throttle and, if neces-

sary, applying both brakes.

In normal turns, the riderand the motorcycle shouldlean together at the sameangle.

In slow tight turns, coun-terbalance by leaning themotorcycle only and keep-ing your body straight.

Normal Turns Slow Turning

1 0

2. LOOK — Look through the turn to where you want to go. Turn just your head,not your shoulders, and keep your eyes level with the horizon.

3. LEAN — To turn the motorcycle must lean. To lean the motorcycle, press onthe handlegrip in the direction of the turn. Press left, lean left, go left. Pressright, lean right, go right. Higher speeds and/or tighter turns require the motor-cycle to lean more.

4. ROLL — Roll on the throttle through the turn to stabilize suspension.Maintain steady speed or accelerate gradually through the turn. This will helpkeep the motorcycle stable.

Keeping Your DistanceThe best protection you can have on the road is distance — a cushion of space —all around your motorcycle. If someone else makes a mistake, distance permitsyou time to react and space to maneuver.

Lane PositionsIn some ways the size of the motorcycle can workto your advantage. Each traffic lane gives a motor-cycle three paths of travel. Your lane positionshould:• Increase your ability to see and be seen.• Avoid others’ blind spots.• Avoid surface hazards.• Protect your lane from other drivers.• Communicate your intentions.• Avoid wind blast from other vehicles.• Provide an escape route.

Select the appropriate path to maximize yourspace cushion and make yourself more easily seenby others on the road.

In general, there is no single best lane position forriders to be seen and to maintain a space cushionaround the motorcycle. No portion of the lane needbe avoided, including the center.

Position yourself in the portion of the lane where you are most likely to be seenand you can maintain a space cushion around you. Change position as traffic sit-uations change. Ride in path 2 or 3 if vehicles and other potential problems areon your left only. Remain in path 1 or 2 if hazards are on your right only. If vehi-cles are being operated on both sides of you, the center of the lane, path 2, is usu-ally your best option (see illustration above).

Lane Positions

11

The oily strip in the center portion that collects drippings from cars is usually nomore than two feet wide. Unless the road is wet, the average center strip permitsadequate traction to ride on safely. You can operate to the left or right of thegrease strip and still be within the center portion of the traffic lane. Avoid ridingon big build-ups of oil and grease usually found at busy intersections or tollbooths.

Following Another VehicleFollowing too closely could be a factor in crashes involving motorcyclists. In traf-fic, motorcycles need as much distance to stop as cars. Normally, a minimum three-second following distance should be maintained behind the vehicle ahead. To gaugeyour following distance:• Pick out a marker, such as a pavement marking or lamp post, on or near the

road ahead.• When the rear bumper of the vehicle ahead passes the marker, count off the

seconds: one-thousand-one, one-thousand-two.• If you reach the marker before you reach a count of three, you are following too

closely.

A three-second following distance leaves a minimum amount of space to stop orswerve if the driver ahead stops suddenly. It also permits a better view of potholesand other hazards in the road.

A larger cushion of space isneeded if your motorcycle willtake longer than normal tostop. If the pavement is slip-pery, if you cannot see throughthe vehicle ahead, or if trafficis heavy and someone maysqueeze in front of you, in -crease your following distance.

Following

3 When riding you should:

a. Turn your head and shoulders.b. Keep your arms straight.c. Keep your knees away from the

gas tank.d. Turn just your head and eyes to

look where you are going.Answer — page 44

1 2

Keep well behind the vehicle ahead even when you are stopped. This will make iteasier to get out of the way if someone bears down on you from behind. It will alsogive you a cushion of space if the vehicle ahead starts to back up for some reason.

When behind a vehicle, ride where the driver can see you in the rearview mirror.Riding in the center portion of the lane should put your image in the middle ofthe rearview mirror where a driver is most likely to see you (see illustration onpage 12).

Riding at the far side of a lane may permit a driver to see you in a sideview mir-ror; however, most drivers don’t look at the sideview mirrors as often as theycheck the rearview mirror. If the traffic situation allows, the center portion of thelane is usually the best place for you to be seen by the drivers ahead and to pre-vent lane sharing by others.

Being FollowedSpeeding up to lose someone following too closely only ends up with someone tail-gating you at a higher speed. A better way to handle tailgaters is to get them in frontof you. When someone is following too closely, change lanes and let them pass. If youcannot do this, slow down and open up extra space ahead of you to allow room forboth you and the tailgater to stop. This will also encourage them to pass. If they donot pass, you will have given yourself and the tailgater more time and space to reactin case an emergency does develop ahead.

Passing and Being PassedBe sure other drivers see you and that you see potentialhazards when passing and being passed. Passing — When passing, follow these steps:1. Ride in the left portion of the lane at a safe following

distance to increase your line of sight and make youmore visible. Signal and check for oncoming traffic.Use your mirrors and turn your head to look for traf-fic behind.

2. When safe, move into the left lane and accelerate.Select a lane position that does not crowd the caryou are passing and provides space to avoid hazardsin your lane.

3. Ride through the blind spot as quickly as possible.4. Signal again and complete mirror and headchecks

before returning to your original lane and then cancel the signal. Remember,passes must be completed within posted speed limits and only where permit-ted. Know your signs and road markings.

Passing

1 3

Being Passed — When you are being passed, stay in the center portion of yourlane. Riding any closer to the passing vehicle could put you in a hazardous situ-ation. Avoid being hit by:

• The other vehicle — A slight mistake by you orthe passing driver could cause a sideswipe.

• Extended mirrors — Some drivers forget thattheir mirrors hang out farther than their fenders.

• Objects thrown from windows — Even if thedriver knows you are there, a passenger may notsee you and might toss something on you or theroad ahead of you.

• Blasts of wind from larger vehicles — They canaffect your control. You have more room for errorif you are in the middle portion when hit by thisblast than if you are on either side of the lane.

Do not move into the portion of the lane farthest from the passing vehicle. It mayinvite the other driver to cut back into your lane too early.

Lane SharingAutomobiles and motorcycles need a full lane to operate safely. Lane sharing isusually prohibited. Riding between rows of stopped or moving cars in the samelane can leave you vulnerable to the unexpected. A hand could come out of a win-dow; a door could open; a car could turn suddenly. Discourage lane sharing byothers. Keep a center-portion position whenever drivers might be tempted tosqueeze by you. Drivers are most tempted to do this:• In heavy, bumper-to-bumper traffic.• When they want to pass you.• When you are preparing to turn at an intersection.• When you are getting in an exit lane or leaving a highway.

Merging VehiclesDrivers on an entrance ramp may not see you onthe highway. Give them plenty of room. Changeto another lane if one is open. If there is no roomfor a lane change, adjust speed to open up spacefor the merging driver.

Vehicles AlongsideDo not ride next to vehicles in other lanes if you donot have to. You might be in the blind spot of a vehi-cle in the next lane, which could switch into your

Merging

Being Passed

1 4

lane without warning. Vehicles in the next lane also blockyour escape if you come upon danger in your own lane.Speed up or drop back to find a place clear of traffic onboth sides.

Scan, Identify, Predict, Decide,Execute (SIPDE)Good experienced riders remain aware of what isgoing on around them. They improve their riding strategy by using SIPDE, a five-step process used to make appropriate judgements, and apply them correctly indifferent traffic situation.

Scan — Search aggressively ahead, to the sides and behind to avoid potentialhazards even before they arise. How assertively you search and how much timeand space you have can eliminate or reduce harm. Focus even more on findingpotential escape routes in or around intersections, shopping areas, school zonesand construction zones.

Be especially alert in areas with limited visibility. Visually busy surroundingscould hide you and your motorcycle from others.

Scan for:• Oncoming traffic that may turn left in front of you.• Traffic coming from the left and right.• Traffic approaching from behind.• Hazardous road conditions.

Identify — Locate hazards and potential conflicts.• Vehicles and other motorcycles may move into your path and increase the like-

lihood of a crash.• Pedestrians and animals may be unpredictable and make short, quick moves.• Stationary objects like

potholes, guard rails,bridges, roadway signs,hedges or trees will notmove into your path butmay influence your ridingstrategy.

Predict — Consider speed,distance and direction ofhazards to anticipate howthey may affect you. Cars

Blind Spots

4 Usually, a good way to handle tailgaters is to:

a. Change lanes and let them pass.b. Use your horn and make obscene

gestures.c. Speed up to put distance be-

tween you and the tailgater.d. Ignore them.

Answer — page 44

1 5

moving into your path are more critical than those moving away or remaining sta-tionary. Predict where a collision may occur. Completing this “what if...?” phraseto estimate results of contacting or attempting to avoid a hazard depends on yourknowledge and experience.

Decide — Determine what you need to do based on your prediction. The mentalprocess of determining your course of action depends on how aggressively yousearched. The result is your action and knowing which strategy is best for the sit-uation. You want to eliminate or reduce the potential hazard. You must decidewhen, where and how to take action. Your constant decision-making tasks muststay sharp to cope with constantly changing traffic situations.

The decisions you make can be grouped by types of hazards you encounter:• One hazard • Two hazards• Multiple hazards

Execute — Carry out your decision. To create more space and minimize harmfrom any hazard:• Communicate your presence with lights and/or horn.• Adjust your speed by accelerating, stopping or slowing.• Adjust your position and/or direction.

Apply the old adage, “one step at a time,” to handle two or more hazards. Adjustspeed to permit two hazards to separate. Then deal with them one at a time as sin-gle hazards. Decision-making becomes more complex with three or more haz-ards. Weigh the consequences of each and give equal distance to hazards.

In potential high-risk areas, school zones and construction zones, cover the clutchand both brakes to reduce the time you need to react.

IntersectionsThe greatest potential for con-flict between you and other traf-fic is at intersections. An inter-section can be in the middle ofan urban area or at a drivewayon a residential street — any-where traffic may cross yourpath of travel. Over one-half ofmotorcycle/ automobile crashesare caused by drivers entering arider’s right-of-way. Vehiclesthat turn left in front of you,

5 To reduce your reaction time, you should:

a. Ride slower than the speed limit.b. Cover the clutch and brakes.c. Shift into neutral when slowing.d. Pull the clutch when turning.

Answer — page 44

1 6

including those turning left from the lane toyour right, and those on side streets that pullinto your lane, are the biggest dangers. UsingSIPDE (see pages 15-16) at intersections iscritical.

There are no guarantees that others see you.Never count on eye contact as a sign that adriver will yield. Too often, a driver looksright at a motorcyclist and still fails to see him/her. The only eyes that you cancount on are your own. If a car can enter your path, assume that it will. Good rid-ers are always looking for trouble not to get into it, but to stay out of it.

Increase your chances of being seen at intersections. Ride with your headlight onin a lane position that provides the best view of oncoming traffic. Provide a spacecushion around the motorcycle that permits you to take evasive action.

Large Intersections — As you approachthe intersection, select a lane position toincrease your visibility to the driver. Coverthe clutch and both brakes to reduce reac-tion time. Reduce your speed as youapproach an intersection. After enteringthe intersection, move away from vehiclespreparing to turn. Do not change speed orposition radically. The driver might thinkyou are preparing to turn.

Blind Intersections — If you approach a blindintersection, move to the portion of the lane thatwill bring you into another driver’s field of vision atthe earliest possible moment. In the illustration atright, the rider has moved to the left portion of thelane, away from the parked car, so the driver on thecross street can see him/her as soon as possible.Remember, the key is to see as much as possibleand remain visible to others while protecting yourspace.

If you have a stop sign or stop line, stop there first.Then edge forward and stop again, just short ofwhere the cross-traffic lane meets your lane (seeillustration). From that position, lean your body for-ward and look around buildings, parked cars or

Large Intersection

Small Intersection

1 7

Blind Intersection

bushes to see if anything is coming. Make sure your front wheel stays out of thecross lane of travel while you are looking.

Passing Parked CarsWhen passing parked cars, stay toward the left of yourlane. You can avoid problems caused by doors open-ing, drivers getting out of cars or people stepping frombetween cars. If oncoming traffic is present, it is usu-ally best to remain in the center-lane position to maxi-mize your space cushion.

A bigger problem can occur if the driver pulls awayfrom the curb without checking for traffic behind.Even if the driver does look, he/she may fail to seeyou.

In either event, the driver might cut into your path.Slow down or change lanes to make room for some-one cutting in.

Vehicles making a sudden U-turn are the most dan-gerous. They may cut you off entirely, blocking theentire roadway and leaving you with no place to go.Because you cannot tell what a driver will do, slowdown and get the driver’s attention. Sound your hornand continue with caution.

Parking at the Roadside and CurbsPark at a 90-degree angle to the curb with the rear wheel touching the curb.

BEING SEENIn crashes with motorcyclists, drivers often say they never saw the motorcycle.From ahead or behind, a motorcycle’s outline is much smaller than that of anoth-er vehicle. Also, it is difficult to see something you are not looking for, and mostdrivers are not looking for motorcycles. More likely, they are looking through theskinny, two-wheeled silhouette in search of cars that may pose a problem to them.Even if a driver does see you coming, you are not necessarily safe. Smaller vehi-cles appear farther away and seem to be traveling slower than they actually are.It is common for drivers to pull out in front of motorcyclists, thinking they haveplenty of time. Too often, they are wrong.

You can do many things to make it easier for others to recognize you and yourmotorcycle:

Parking

Parked Cars

1 8

ClothingMost crashes occur in broad daylight. Wear bright-colored clothing to increaseyour chances of being seen. Remember, your body is half of the visible surfacearea of the rider/motorcycle unit.

Bright orange, red, yellow or green jackets or vests are your best options forbeing seen. Your helmet can do more than protect you in a crash. Brightly coloredhelmets also may help others see you. Any bright color is better than drab or darkcolors. Reflective, bright-colored clothing (helmet and jacket or vest) is best.

Reflective material on a vest and on the sides of the helmet will help drivers com-ing from the side to spot you. Reflective material also can be a big help for driv-ers coming toward you or from behind.

HeadlightThe best way to help others see your motorcycle is to keep the headlight on at alltimes (although motorcycles sold in the U.S. since 1978 automatically have theheadlights on when running). Illinois law requires that the headlight be onwhen operating on streets and highways.

Use of the high beam during the day increases the likelihood that oncoming driv-ers will see you. Use the low beam at night and in cloudy weather.

SignalsThe signals on a motorcycle are similar to those on a car. Theytell others what you plan to do. Due to a rider’s added vulner-ability, however, signals are even more important. Use themanytime you plan to change lanes or turn. Use them even whenyou think no one else is around. It is the car you do not see thatis going to give you the most trouble. Your signal lights alsomake you easier to spot. That is why it is a good idea to useyour turn signals even when what you plan to do is obvious.

When you enter a freeway, drivers approaching from behindare more likely to see your signal blinking and make room foryou.

Turning on your signal light before each turn reduces confusion and frustrationfor traffic around you. Once you turn, make sure your signal is off, or a drivermay pull directly into your path thinking you plan to turn again. Use your signalsat every turn so drivers can react accordingly. Do not make them guess what youintend to do.

Signaling

1 9

Brake LightA motorcycle’s brake light is usually not as noticeable as the brake lights on a car,particularly when the taillight is on. (It goes on with the headlight.) If the situationpermits, help others notice you by flashing your brake light before you slow down.It is especially important to flash your brake light before you:• Slow more quickly than others might expect (turning off a high-speed high-

way).• Slow where others may not expect it (in the middle of a block or at an alley).

If you are being followed closely, it is a good idea to flash your brake light beforeyou slow. The tailgater may be watching you and not see something ahead thatwill make you slow down. This will hopefully discourage them from tailgatingand warn them of hazards ahead they may not see.

Using Your MirrorsWhile it is most important to scan what is happeningahead, you cannot afford to ignore situations behind.Traffic conditions change quickly. Knowing what isgoing on behind is essential for you to make a safedecision about how to handle trouble ahead. Frequent mirror checks should be part of your normalscanning routine. Make a point of using your mirrors:• When stopped at an intersection. Watch cars com-

ing up from behind. If the driver is not paying attention, he/she could be on topof you before he/she sees you.

• Before changing lanes. Make sure no one is about to pass you.• Before slowing down. The driver behind may not expect you to slow, or may

be unsure about where you will slow. For example, you signal a turn and thedriver thinks you plan to turn at a distant intersection, rather than at a nearerdriveway.

Some motorcycles have rounded(convex) mirrors. These providea wider view of the road behindthan flat mirrors. They also makevehicles seem farther away thanthey really are. If you are notused to convex mirrors, getfamiliar with them. (While youare stopped, pick out a parked carin your mirror. Form a mentalimage of how far away it is.Then, turn around and look at it

Using Mirrors

6 Making eye contact with other drivers:

a. Is a good sign they see you.b. Is not worth the effort it takes.c. Does not mean the other driver

will yield.d. Guarantees that the other driver

will yield to you.Answer — page 44

2 0

to see how close you came.) Practice with your mirrors until you become a goodjudge of distance. Even then, allow extra distance before you change lanes.

Head ChecksChecking your mirrors is not enough. Motorcycles have “blind spots” like othervehicles. Before changing lanes, turn your head and look to the side for othervehicles.

On a road with several lanes, check the far lane and the one next to you. A driv-er in the distant lane may head for the same space you plan to take.

Frequent head checks also should be your normal scanning routine. Only by know-ing what is happening all around you are you fully prepared to deal with it.

HornBe ready to use your horn to get someone’s attention quickly. It is a good idea togive a quick beep before passing anyone who may move into your lane.Following are some situations:• A driver in the lane next to you is driving too closely to the vehicle ahead and

may want to pass.• A parked car has someone in the driver’s seat.• Someone is in the street, riding a bicycle or walking.

In an emergency, press the horn button loud and long. Be ready to stop or swerveaway from the danger. Keep in mind that a motorcycle’s horn is not as loud as acar’s; therefore, use it, but don’t rely on it. Other strategies may be appropriatealong with the horn.

Riding at NightAt night it is harder for you to see and be seen. Picking your headlight or taillightout of the car lights around you is not easy for other drivers. To compensate: • Reduce Your Speed —

Ride even slower than youwould during the day, par-ticularly on roads you do notknow well. This will in -crease your chances ofavoid ing a hazard.

• Increase Distance — Dis -tances are harder to judge atnight than during the day.Your eyes rely upon shad-ows and light contrasts to

a. Be worn at night .b. Be worn during the day.c. Not be worn.d. Be worn day and night.

Answer — page 44

7 Reflective clothing should:

2 1

determine how far away an object is and how fast it is coming. These contrastsare missing or distorted under artificial lights at night. Open up your followingdistance and allow more distance to pass and be passed.

• Use the Car Ahead — The headlights of the car ahead can give you a better view of the road than even your high beam can. Taillights bouncing up and down can alert you to rough pavement.

• Use Your High Beam — Get all the light you can. Use your high beam when-ever you are not following or meeting a car.

• Be Flexible About Lane Position — Change to whatever portion of the laneis best to help you see, be seen and keep an adequate space cushion.

• Be Visible — Wear reflective materials when riding at night.

CRASH AVOIDANCE No matter how careful you are, there will be times when you find yourself in atight spot. Your chances of getting out safely depend on your ability to reactquickly and properly. Crashes often occur because a rider is not prepared forcrash-avoidance maneuvers.

Knowing when and how to stop or swerve are two skills critical in avoiding acrash. It is not always desirable or possible to stop quickly to avoid an obstacle.Riders also must be able to swerve around an obstacle. Determining the skillsnecessary for the situation is important as well. Studies show most crash-involvedriders: • Underbrake the front tire and overbrake the rear. • Did not separate braking from swerving or did not choose swerving

when it was appropriate.

Quick StopsTo stop quickly, apply both brakes at the same time. Don’t be shy about using thefront brake, but don’t grab it either. Squeeze the brake lever firmly and progres-sively. If the front wheel locks, release the front brake immediately then reapplyit firmly. At the same time,press down on the rearbrake. If you accidentallylock the rear brake on agood traction surface, keepit locked until you havecompletely stopped. Evenwith a locked rear wheel,you can control the motor-cycle on a straight away ifit is upright and going in astraight line.

Stopping Distance

REAR

FRONT

BOTH

2 2

Always use both brakes at the same time to stop. The front brake can provide70 percent or more of the potential stopping power. If you must stop quickly whileturning or riding a curve, the best technique is to straighten the bike upright firstand then brake. However, it may not always be possible to straighten the motorcy-cle and then stop. If you must brake while leaning, apply light brakes and reducethe throttle. As you slow, you can reduce your lean angle and apply more brakepressure until the motorcycle is straight and maximum brake pressure is possible.You should straighten the handlebars in the last few feet of stopping. The motor-cycle should then be straight up and in balance.

Swerving or Turning QuicklySometimes you may not have enough room tostop, even if you use both brakes properly. Anobject might appear suddenly in your path or thecar ahead might squeal to a stop. The only wayto avoid a crash may be to turn quickly or swervearound it.

A swerve is any sudden change in direction. Itcan be two quick turns or a rapid shift to the side.Apply a small amount of hand pressure to thehandlegrip located on the side of your intendeddirection of escape. This will cause the motorcy-cle to lean quickly. The sharper the turn(s), themore the motorcycle must lean. Keep your bodyupright and allow the motorcycle to lean in thedirection of the turn while keeping your kneesagainst the tank and your feet solidly on the pegs.Let the motorcycle move underneath you.

Make your escape route the target of your vision.Press on the opposite handlegrip once you clearthe obstacle to return to your original direction oftravel. To swerve to the left, press the left handle-

grip, then press the right to recover. To swerve to the right, press right, then left. Ifbraking is required, separate it from swerving. Brake before or after, neverwhile swerving.

CorneringA primary cause of single-vehicle crashes is motorcyclists running wide in acurve or turn and colliding with the roadway or a fixed object. Every curve is dif-ferent. Be alert to whether a curve remains constant, gradually widens, getstighter or involves multiple turns. Ride within your skill level and posted speedlimits. Your best path may not always follow the curve of the road.

Swerve, Then Brake

Brake, Then Swerve

2 3

Change lane position depend-ing on traffic, road conditionsand curve of the road. If notraffic is present, start at theoutside of a curve to increaseyour line of sight and the effec-tive radius of the turn. As youturn, move toward the inside ofthe curve, and as you pass thecenter, move to the outside toexit.

8 The best way to stop quicklyis to:

a. Use the front brake only.b. Use the rear brake first.c. Throttle down and use the front

brake.d. Use both brakes simultaneously.

Answer — page 44

2 4

Constant Curves Multiple Curves

Widening CurvesDecreasing Curves (Tighter Turns)

Another alternative is to move to the center of your lane before entering a curveand stay there until you exit. This permits you to spot approaching traffic as soonas possible. You can also adjust for traffic crowding the center line or debrisblocking part of your lane.

DANGEROUS SURFACESYour chance of falling or being involved in a crash increases whenever you rideacross uneven surfaces or obstacles, slippery surfaces, railroad tracks, andgrooves and gratings.

Uneven Surfaces andObstaclesWatch for uneven surfaces such asbumps, broken pavement, potholes orsmall pieces of highway trash. Try toavoid obstacles by slowing or goingaround them. If you must go over theobstacle, first determine if it is possi-ble. Approach it at as close to a 90-degree angle as possible. Look whereyou want to go to control your path of travel. If you have to ride over the obsta-cle, you should:• Slow down as much as possible before contact.• Make sure the motorcycle is straight.• Rise slightly off the seat with your weight on the footpegs to absorb the shock

with your knees and elbows and avoid being thrown off the motorcycle.• Just before contact, roll on the throttle slightly to lighten the front end.

If you ride over an object on the street, pull off the road and check your tires andrims for damage before riding any farther.

Slippery Surfaces Motorcycles handle better when ridden on surfaces that permit good traction.Surfaces that provide poor traction include:• Wet pavement, particularly just after it starts to rain and before surface oil

washes to the side of the road.• Gravel roads, or where sand and gravel collect.• Mud, snow and ice.• Lane markings, steel plates and manhole covers, especially when wet.

To ride safely on slippery surfaces:• Reduce your speed — Slow down before you get to a slippery surface to lessen

your chances of skidding. Your motorcycle needs more distance to stop. It is par-

Obsta cles

2 5

ticularly important to reduce speed before entering wet curves.• Avoid sudden moves — Any sudden change in speed or direction can cause a

skid. Be as smooth as possible when you speed up, shift gears, turn or brake.• Use both brakes — The front brake is still effective, even on a slippery sur-

face. Squeeze the brake lever gradually to avoid locking the front wheel.Remember, use gentle pressure on the rear brake.

• Avoid the center of a lane — When it starts to rain, ride in the tire tracks leftby cars. Often, the left tire track will be the best position, depending on trafficand other road conditions as well.

• Watch for oil spots — Be careful when you put your foot down to stop orpark. You may slip and fall.

• Watch for dirt and gravel — Dirt and gravel collect along the sides of theroad, especially on curves and ramps leading to and from highways. Be awareof what is on the edge of the road, particularly when making sharp turns andgetting on or off freeways at high speeds.

• Watch for ice patches — Ice develops more quickly on some sections of aroad than on others. Patches of ice tend to form in low or shaded areas and onbridges and overpasses. Wet surfaces or wet leaves are just as slippery. Ride onthe least slippery portion of the lane and reduce speed.

Cautious riders steer clear of roads covered with ice or snow. If you cannot avoida slippery surface, keep your motorcycle straight up and proceed as slowly aspossible. If you encounter a large surface so slippery you must coast or travel ata walking pace, consider letting your feet skim along the surface. If the motorcy-cle starts to fall, you can catch yourself. Be sure to keep off the brakes. If possi-ble, squeeze the clutch and coast. Attempting this maneuver at anything otherthan the slowest of speeds could prove hazardous.

Beware of Slippery Roads

2 6

Railroad Tracks, Trolley Tracks and Pavement SeamsIt is usually safer to ride straight within your lane to cross tracks. Turning to taketracks head on (at a 90-degree angle) can be more dangerous and may carry youinto another lane of traffic. For track and road seams that run parallel to yourcourse, move far enough away from tracks, ruts or pavement seams to cross at anangle of at least 45 degrees. Then, make a quick, sharp turn. Edging across couldcatch your tires and throw you off balance.

Grooves and Gratings Riding over rain grooves or bridge gratingsmay cause a motorcycle to weave. The uneasy,wandering feeling is generally not hazardous.Relax, maintain a steady speed and ride straightacross. Crossing at an angle forces riders tozigzag to stay in the lane. The zigzag is farmore hazardous than the wandering feeling.

MECHANICAL PROBLEMSYou can find yourself in an emergency themoment something goes wrong with yourmotorcycle. In dealing with any mechanical problem, take into account the roadand traffic conditions you face. Following are some guidelines that can help youhandle mechanical problems safely.

Tire FailureYou will seldom hear a tire go flat. If the motorcycle starts handling differently,

Crosstracks — RIGHT

Crosstracks — WRONG

Parallel Tracks — RIGHT

Parallel Tracks — WRONG

Grate Crossings — RIGHT

Grate Crossings — WRONG

2 7

it may be a tire failure. This can be dangerous. You should be able to tell from theway the motorcycle reacts. If one of your tires suddenly loses air, react quickly tokeep your balance. Pull off and check the tires.

If the front tire goes flat, the steering will feel heavy. A front-wheel flat is partic-ularly hazardous because it affects your steering. You have to steer well to keepyour balance.

If the rear tire goes flat, the back of the motorcycle may jerk or sway from sideto side.

If either tire goes flat while riding:• Hold handlegrips firmly, ease off the throttle, and keep a straight course.• If braking is required, however, gradually apply the brake of the tire that is not

flat, if you are sure which one it is.• When the motorcycle slows, edge to the side of the road, squeeze the clutch

and stop.

Stuck ThrottleTwist the throttle back and forth several times. If the throttle cable is stuck, thismay free it. If the throttle stays stuck, immediately operate the engine cut-offswitch and pull in the clutch at the same time. This will remove power from therear wheel, although engine noise may not immediately decline. Once the motor-cycle is under control, pull off and stop. After you have stopped, check the throt-tle cable carefully to find the source of the trouble. Make certain the throttleworks freely before you start to ride again.

WobbleA wobble occurs when the front wheel and handlebars suddenly start to shakefrom side to side at any speed. Most wobbles can be traced to improper loading,unsuitable accessories or in -cor rect tire pressure. If you arecarrying a heavy load, lightenit. If you can’t, shift it. Centerthe weight lower and fartherforward on the motorcycle.Make sure tire pressure, springpre-load, air shocks anddampers are at the settings rec-ommended for that muchweight. Make sure windshieldsand fairings are mounted prop-erly. Check for poorly adjusted

9 When it starts raining it is usu-ally best to:

a. Ride in the center of the lane.b. Pull off to the side until the rain

stops.c. Ride in the tire tracks left by cars.d. Increase your speed.

Answer — page 44

2 8

steering; worn steering parts; a front wheel that is bent, misaligned or out of bal-ance; loose wheel bearings or spokes; and swingarm bearings.

If none of these are determined to be the cause, have the motorcycle checked outthoroughly by a qualified professional. Trying to accelerate out of a wobble willonly make the motorcycle more unstable. You should instead:• Grip the handlebars firmly, but do not fight the wobble.• Close the throttle gradually to slow down. Do not apply the brakes; braking

could make the wobble worse.• Move your weight as far forward and down as possible.• Pull off the road as soon as you can to fix the problem. Chain ProblemsA chain that slips or breaks while you are riding could lock the rear wheel andcause your motorcycle to skid. Chain slippage or breakage can be avoided byproper maintenance.• Slippage — If the chain slips when you try to speed up quickly or ride uphill,

pull off the road. Check the chain and sprockets. Tightening the chain mayhelp. If the problem is a worn or stretched chain or worn or bent sprockets,replace the chain, the sprockets or both before riding again.

• Breakage — You will notice an instant loss of power to the rear wheel. Closethe throttle and brake to a stop.

Engine SeizureWhen the engine locks or freezes it is usually low on oil. The engine’s movingparts cannot move smoothly against each other and the engine overheats. The firstsign may be a loss of engine power or a change in the engine’s sound. Squeezethe clutch lever to disengage the engine from the rear wheel. Pull off the road andstop. Check the oil. If needed, oil should be added as soon as possible or theengine will seize. When this happens, the effect is the same as a locked rearwheel. Let the engine cool before restarting.

OBSTACLESAnimalsNaturally, you should doevery thing you safely can toavoid hitting an animal. If youare in traffic, however, remainin your lane. Hitting some-thing small is less dangerousto you than hitting somethingbig, like a car.

a. Accelerate out of the wobble.b. Use the brakes gradually.c. Grip the handlebars firmly and

close the throttle gradually.d. Downshift.

Answer — page 44

10 If your motorcycle starts towobble you should:

2 9

Motorcycles seem to attract dogs. If you are chased, downshift and approach theanimal slowly. As you approach it, accelerate away and leave the animal behind.Do not kick at an animal. Keep control of your motorcycle and look to where youwant to go. For larger animals (deer, cattle, etc.), brake and prepare to stop; theyare unpredictable.

Flying ObjectsOccasionally, riders are struck by insects, cigarettes thrown from cars or pebbleskicked up by the tires of the vehicle ahead. If you are wearing face protection, itmight get smeared or cracked, making it difficult to see. Without face protection,an object could hit you in the eye, face or mouth. Whatever happens, keep youreyes on the road and your hands on the handlebars. When safe, pull off the roadand repair the damage.

Getting off the RoadIf you need to leave the road to check the motorcycle (or need to rest):• Check the roadside — Make sure the surface of the roadside is firm enough

to ride on. If it is soft grass, loose sand or you are just not sure about it, slowdown before you turn onto it.

• Signal — Drivers behind might not expect you to slow down. Give a clear sig-nal that you will be slowing down and changing direction. Check your mirrorand make a head check before you take any action.

• Pull off the road — Get as far off the road as you can. It can be very hard tospot a motorcycle by the side of the road. You do not want someone elsepulling off at the same place you are.

• Park carefully — Loose and sloped shoulders can make setting the side or cen-ter stand difficult.

CARRYING PASSENGERS AND CARGOOnly experienced riders should carry passengers or large loads. The extra weightchanges the way the motorcycle handles, balances, speeds up and slows down.Before taking a passenger or a heavy load on the street, practice away from traffic.

EquipmentTo carry passengers safely:• Equip and adjust your motorcycle to carry passengers.• Instruct the passenger before you start.• Adjust your riding technique for the added weight.

Equipment should include:• Proper seat — large enough to hold both of you without crowding. You should

not sit any farther forward than you usually do.

3 0

• Footpegs for passenger — firm footing prevents your passenger from fallingoff and pulling you off too.

• Protective equipment — the same as recommended for motorcycle operators.

Adjust the suspension to handle the additional weight. You will probably need toadd a few pounds of pressure to the tires if you carry a passenger. (Check yourowner’s manual for appropriate settings.) While your passenger sits on the seatwith you, adjust the mirror and headlight according to the change in the motorcy-cle’s angle.

Instructing PassengersEven if your passenger is a motorcycle rider, provide complete instructionsbefore you start.

Tell your passenger to:• Get on the motorcycle only after you have started the engine.• Sit as far forward as possible without crowding you.• Hold on firmly to your waist, hips or belt.• Keep both feet on the footpegs, even when stopped.• Keep legs away from the muffler(s), chains or moving parts.• Stay directly behind you, leaning as you lean.• Avoid unnecessary talk or motion.

Also, tell your passenger to tighten his/her hold when you:• Approach surface problems.• Are about to start from a stop.• Warn that you will make a sudden move.

Riding with PassengersYour motorcycle will respond more slowly with a passenger on board. The heav-ier your passenger, the longer it will take to slow down and speed up, especiallyon a light motorcycle. • Ride slower, especially

when taking curves, cor-ners or bumps.

• Start slowing earlier asyou approach a stop.

• Open up a larger cushionof space ahead and to thesides.

• Wait for larger gaps tocross, enter or merge intraffic.

11 If you are chased by a dogyou should:

a. Kick it away.b. Stop until the animal loses interest.c. Swerve around the animal.d. Approach the animal slowly,

then speed up.

Answer — page 44

3 1

Carrying LoadsMost motorcycles are not designed to carry much cargo. Small loads can be car-ried safely if positioned and fastened properly.• Keep the load low — Fasten loads securely or put them in saddlebags. Piling

loads against a sissybar or frame on the back of the seat raises the motorcycle’scenter of gravity and disturbs its balance.

• Keep the load forward — Place the load over, or in front of, the rear axle.Tankbags keep loads forward, but use caution when loading hard or sharpobjects. Make sure the tankbag does not interfere with handlebars or controls.Mounting loads behind the rear axle can affect how the motorcycle turns andbrakes. It can also cause a wobble.

• Distribute the load evenly — Load saddlebags with about the same weight.An uneven load can cause the motorcycle to drift to one side.

• Secure the load — Fasten the load securely with bungee cords or nets. Elasticcords with more than one attachment point per side are more secure. A tightload will not catch in the wheel or chain, causing it to lock up and skid. Ropetends to stretch and knots come loose, permitting the load to shift or fall.

• Check the load — Stop and check the load every so often to make sure it hasnot worked loose.

PROTECT YOURSELF AND OTHERSGroup RidingIf you ride with others, do it in a way that promotes safety and does not interferewith the flow of traffic. Small groups make it easier and safer for car drivers whoneed to get around them. A small number is not separated as easily by traffic orred lights. Riders will not always be hurrying to catch up. If your group is largerthan four or five riders, divide it into two or more smaller groups.• Plan ahead — The leader should look ahead for changes and signal early. Start

lane changes early to permit others to follow.• Put beginners up front — Place inexperienced riders just behind the leader

where more experienced riders can watch them from the back.• Follow those behind — Let the tailender set the pace. Use your mirrors to

keep an eye on the person behind. If a rider falls behind, everyone should slowto stay with the tailender.

• Know the route — Make sure everyone knows the route so if someone is sep-arated they will not have to hurry to keep from getting lost or taking a wrongturn. Plan frequent stops on long rides.

Maintain close ranks but at the same time keep a safe distance to allow each riderin the group time and space to react to hazards. A close group takes up less spaceon the highway, is easier to see and is less likely to be separated. However, it mustbe done properly.

3 2

• Don’t pair up — Never operate directly along-side another rider. There is no place to go if youhave to avoid a car or something on the road. Totalk, wait until you are both stopped.

• Staggered formation — This is the best way tokeep ranks close yet maintain an adequate spacecushion. The leader rides in the left side of thelane, while the second rider stays one secondbehind in the right side of the lane. A third ridermaintains in the left position, two secondsbehind the first rider. The fourth rider wouldkeep a two-second distance behind the secondrider. This formation keeps the group close andpermits each rider a safe distance from othersahead, behind and to the sides.

• Passing in formation — Riders ina staggered formation should passone at a time. First, the lead ridershould pull out and pass when it issafe. After passing, the leadershould return to the left position andcontinue riding at passing speed toopen room for the next rider. Afterthe first rider passes safely, the sec-ond rider should move up to the leftposition and watch for a safe chanceto pass. After passing, this ridershould return to the right positionand open up room for the next rider.

Some people suggest that the leader should move to the right side after passing avehicle. This is not a good idea. It encourages the second rider to pass and cutback in before there is a largeenough space cushion in frontof the passed vehicle. It is sim-pler and safer to wait untilthere is enough room ahead ofthe passed vehicle to alloweach rider to move into thesame position held before thepass. It is best to move into asingle-file formation whenriding curves, turning, enter-ing or leaving a highway.

Staggered Formation

Group PassingStage 1

Group PassingStage 2

a. Lean as you lean.b. Hold on to the motorcycle seat.c. Sit as far back as possible.d. Never hold on to you.

Answer — page 44

12 Passengers should:

3 3

Alcohol and Other DrugsYour ability to perform and respond to changing road and traffic conditions isinfluenced by how fit and alert you are. Alcohol and other drugs, more than anyother factor, decrease your ability to think clearly and ride safely. As little as onedrink can have a significant effect on your performance. Studies show that nearlyhalf of all riders killed in motorcycle crashes had been drinking. Only one-third ofthose riders had a blood-alcohol concentration (BAC) above the illegal limit (.08).The rest had only a few drinks in their systems, enough to impair riding skills.

Injuries occur in 90 percent of motorcycle crashes and 33 percent of automobilecrashes that involve drinking or drugs. Annually, more than 2,000 motorcyclists arekilled and about 50,000 seriously injured in alcohol-related crashes. Alcohol anddrugs make you less able to think clearly and perform physical tasks skillfully.Judgment and the decision-making processes needed for vehicle operation areaffected long before the illegal BAC limit is reached. Many over-the-counter pre-scription drugs and illegal drugs have side effects that increase the risk of a crashwhile riding. And the combined effects of alcohol and other drugs are more danger-ous than either is alone.

Alcohol enters the bloodstream quickly. Unlike most foods and beverages, it doesnot need to be digested. Within minutes after being consumed, it reaches the brainand begins to affect the drinker. Alcohol slows down and impairs bodily functions— both mental and physical.

BAC — Blood-alcohol concentration is the amount of alcohol in relation toblood in the body. Generally, alcohol can be eliminated in the body at the rate ofabout one drink per hour. But a variety of other factors also may influence thelevel of alcohol retained. The more alcohol in your blood, the greater the degreeof impairment.

Three factors play a major part in determining BAC:• Amount of alcohol consumed.• How fast you drink.• Body weight.

Other factors also contribute tothe way alcohol affects yoursystem. Your gender, physicalcondition and food intake alsomay cause your BAC level to beeven higher. Alcohol may stillaccumulate in your body evenif you are drinking at a rate ofone drink per hour. Abilities

13 When riding in a group, inex-perienced riders should posi-tion themselves:

a. Just behind the leader.b. In front of the group.c. At the tail end of the group.d. Beside the leader.

Answer — page 44

3 4

and judgment can be affected by that one drink.

A 12-ounce can of beer, a mixed drink with a 1.5-ounce shot of hard liquor and a5-ounce glass of wine all contain the same amount of alcohol.

The faster you drink, the more alcohol accumulates in your body. If you drink twodrinks in one hour, at the end of that hour, at least one drink remains in yourbloodstream. Without taking into account any of the other factors, the formulabelow illustrates the LEAST amount of drinks remaining in the bloodstream:

A person drinking:• 8 drinks in 4 hours would have at least 4 drinks remaining in his/her system.• 7 drinks in 3 hours would have at least 4 drinks remaining in his/her system.

There are times when a larger person may not accumulate a high concentration ofalcohol for each drink consumed because they have more blood and other bodilyfluids. Because of individual differences it is better not to risk that your abilitieshave not been affected. Whether or not you are legally intoxicated is not the realissue. Impairment of judgment begins well below the illegal BAC limit.

DUI — In Illinois, a person with a BAC of .08 is considered intoxicated. It isillegal to drive if your BAC is .08 or greater. However, you can be convicted ofDUI if your BAC is less than .08 percent and your driving ability is impaired.

Alcohol Concentration

Total DrinksConsumed

Number ofHours SinceLast Drink

Drinks Leftin the BodyLESS

- =EQUALS

12-oz. Beer 5-oz. Wine

1.5-oz. ShotHard Liquor

3 5

Drunk drivers face stiff, mandatory penalties. If you are convicted of driving underthe influence of alcohol or drugs, you may receive any of the following:• Driver’s license suspension — Mandatory suspension/revocation for convic-

tion, arrest or refusal to submit to a breath test.• BAIID — Breath-alcohol device required to start your vehicle. • Fines — Severe fines, usually levied with a driver’s license suspension/revo-

cation.• Community service — Performing tasks such as picking up litter along the

highway, washing cars in the motor-vehicle pool or working at an emergencyward.

In addition, you face attorney’s fees, lost work time spent in court or in alcohol-education programs, public transportation costs (while your driver’s license issuspended/revoked) and the psychological costs of being tagged a drunk driver.

Don’t Drink or Don’t Ride — If you have not controlled your drinking, youmust control your riding. Leave the motorcycle so you will not be tempted to ride.Arrange another way to get home. Once you start, your resistance becomes weak-er. Setting a limit or pacing yourself are poor alternatives. Your ability to exercisegood judgment is one of the first things affected by alcohol. Even if you try todrink in moderation, you may not realize to what extent your skills have sufferedfrom alcohol’s effects.

People who have had too much to drink are unable to make a responsible deci-sion. It is up to others to step in and keep them from taking too great a risk. Thereare several ways to keep friends from hurting themselves:• Arrange a safe ride — Provide alternative ways for them to get home.• Slow the pace of drinking — Involve them in other activities.• Keep them there — Use any excuse to keep them from getting on their motor-

cycle. Serve them food and coffee to pass the time. Explain your concerns fortheir risks of getting arrested or hurt or hurting someone else.

• Get friends involved — Usepeer pressure from a group offriends to intervene.

FatigueRiding a motorcycle is more tir-ing than driving a car. On a longtrip, you will tire sooner thanyou would in a car. Avoid ridingwhen tired. Fatigue can affectyour control of the motorcycle.• Protect yourself from the

elements — Wind, cold and

14 If you wait an hour for eachdrink before riding:

a. You cannot be arrested for drinkingand driving.

b. Your riding skills will not be affected.c. Effects from drinking may still

remain.d. You will be okay as long as you ride

slowly.Answer — page 44

3 6

rain make you tire quickly. Dress warmly. A windshield is worth its cost if youplan to ride long distances.

• Limit your distance — Experienced riders seldom try to ride more than sixhours a day.

• Take frequent rest breaks — Stop and get off the motorcycle at least everytwo hours.

• Don’t drink or use drugs — Artificial stimulants often result in extremefatigue or depression when they start to wear off. Riders are unable to concen-trate on the task at hand.

EARNING YOUR MOTORCYCLELICENSESafe riding requires knowledge and skill. Toearn your license, you must pass both the knowl-edge test and skills test covering information inthis manual. To pass you must study this manu-al thoroughly and practice the skills and tech-niques discussed.

Rider Skill TestThe Secretary of State’s office administers theRider Skill Test. Applicants for a Class L orClass M license are required to pass this exami-nation.

Exception: Persons age 18 and older who hold a valid Illinois driver’s licenseand have successfully completed a motorcycle training course approved by IDOTare not required to pass this test at a Driver Services facility. Those personsalready will have passed a skills test at the end of the training course and mustshow an IDOT Motorcycle Rider Education Course completion card dated afterJan. 1, 1993, in addition to proper identification. IDOT Motorcycle RiderEducation Course completion cards are valid for one year after the issue date. Forinformation about a Motorcycle Rider Education Course in your area, please callone of the toll-free numbers on page 45 of this manual.

The Rider Skill Test is designed to measure vehicle handling skills in an off-streetpaved area approximately 30 feet by 75 feet. Lines are painted within this area todelineate the following six exercises. An equipment check is conducted prior tothe examination.

3 7

Two-Wheel Rider Skill TestEngine Stalling• Points are assessed if you stall your engine at any time during any exercise.• Stalling the engine four times during this test is an automatic failure.

Exercise 1 — Cone weave, normal stop• When signaled, ride to the right of the first cone, to the left of the second, and

so on. Weave past all five cones without touching or skipping a cone.• Turn left and ride toward this side of the course. Make a smooth, non-skidding

stop with your front tire inside the box.• When stopped, your front tire must not touch the painted lines. Remain

stopped.

Exercise 2 — Turn from a stop, U-turn• When signaled, make a right turn between the boundary lines. Do not touch

either line.• Diagonally, cross to the opposite side of the range and make a left U-turn inside

the painted box at the far end of the range.• Do not touch the solid line (motorcycles 600cc or more) or the dashed line

(motorcycles less than 600cc) or put a foot down.• Stop with your front tire inside the box and wait for further instructions.

Exercise 3 — Quick stop• Position your motorcycle on the Start T.• When signaled, accelerate straight up this path. Stabilize your speed between

12 and 20 mph by the time you reach the first line.• Maintain a steady speed.• When your front tire crosses the second line, stop as fast as you safely can. You

will not lose points if you skid.• Once stopped, do not allow your motorcycle to roll in either direction.

Exercise 4 — Obstacle swerve• Start at the same Start T.• When signaled, accelerate straight up this path. Stabilize your speed between

12 and 18 mph by the time you reach the first line.• Maintain a steady speed.• When your front tire passes the second line, swerve to the right/left.• Avoid the obstacle line and stay inside the sideline. Do not touch either line.• Stop smoothly and wait for further instructions.

3 8

1 2

43

Cone Weave, Normal Stop

Quick Stop Obstacle Swerve

Turn From a Stop, U-turn

3 9

20ʼ T

imin

g Z

one

20ʼ T

imin

g Z

one

Three-Wheel/Four-Wheel Rider Skill TestEngine Stalling• Points are assessed if you stall your engine at any time during any exercise.• Stalling the engine four times during this test is an automatic failure.

Exercise 1 — Left turn, normal stop• Accelerate straight ahead and make a sharp left turn between the outside

boundary lines and the cone marker. Do not touch lines or the cone.• Ride toward the end of the course. Make a smooth, non-skidding stop with

your front tire inside the box (left front tire on vehicles with two front tires).• When stopped, your front tire must not touch the painted lines. Remain

stopped.

Exercise 2 — Cone weave, turn from a stop• When signaled, ride to the left of the first cone, to the right of the second, and

to the left of the third. Weave past all three without touching or skipping anyof the cones.

• Turn right at the end of the course and stop at the Start T facing the other sideof the course.

• When signaled, make a right turn between the boundary lines and the cone. Donot touch the outside boundary lines or the cone.

• Make a smooth, non-skidding stop with your front tire inside the box and waitfor further instructions.

Exercise 3 — Quick stop• Position your motorcycle on the Start T.• When signaled, accelerate straight up this path. Stabilize your speed between

12 and 20 mph by the time you reach the first line.• Maintain a steady speed.• When your front tire/overhang crosses the second line, stop as fast as you safe-

ly can. You will not lose points if you skid.• Once stopped, do not allow your vehicle to roll in either direction.

Exercise 4 — Obstacle swerve• Start at the same Start T.• When signaled, accelerate straight up this path. Stabilize your speed between

12 and 18 mph by the time you reach the first line.• Maintain a steady speed.• When your front tire/overhang passes the second line, swerve to the right/left.• Avoid the obstacle line and stay to the inside of the sideline. Do not touch

either line.• Stop smoothly and wait for further instructions.

4 0

1 2

43

Left Turn, Normal Stop

Quick Stop Obstacle Swerve

Cone Weave, Turn From a Stop

4 1

20ʼ T

imin

g Z

one

20ʼ T

imin

g Z

one

To receive a motorcycle license with full privileges, Illinois law requires themaneuvers be performed as designed.

If you test on a three-wheeled vehicle, a J-11 restriction (three-wheeled motorcycleonly) will be added until completion of a two-wheeled test. If you test on a four-wheel vehicle, a J-17 restriction (four-wheeled motorcycle only) will be added.

You also may be tested on your ability to:• Know your motorcycle and your riding limits.• Accelerate, brake and turn safely.• See, be seen and communicate with others.• Adjust speed and position to the traffic situation. • Stop, turn and swerve quickly.• Make critical decisions and carry them out.

Examiners may score on factors related to safety such as:• Selecting safe speeds to perform maneuvers.• Choosing the correct path and staying within boundaries.• Completing normal and quick stops.• Completing normal and quick turns or swerves.

The test will be terminated if the driver:• Falls or drops the motorcycle at any time.• Commits an unsafe act (i.e., loses control, raises the front wheel off the ground,

uses excessively high speed, etc.).• Obtains enough points (11 or more) to constitute a failure.• Testing time exceeds a reasonable time limit.

REQUIRED EQUIPMENTNo motorcycle or motor-driven cycle may be legally operated on a street or high-way without the following required equipment:

Brakes — Motorcycles must have brakes on both wheels, with a separate meansof application for each wheel or two separate means of application on the rearwheel. Motor-driven cycles must have either a hand-operated or foot-operatedbrake on at least one wheel, preferably the rear wheel.

Eye protection — Both driver and passenger must be protected by glasses, gog-gles or a transparent windshield.

Footrests — No passengers may be carried except in a sidecar or enclosed cab,unless the vehicle is equipped for passengers with footrests adjusted to fit the pas-senger.

4 2

Handlebars — Handlebars should not be higher than the height of the head ofthe operator when seated in the normal driving position astride that portion of theseat or saddle occupied by the operator. The operator must keep at least one handon the handlebar grip at all times the motorcycle is in motion.

Headlights — At least one white light, visible for 500 feet, must be lighted when-ever the motorcycle is being operated on streets or highways. A device to modu-late the high beam of the head lamp may be used except when lighted lamps arerequired for all vehicles.

Horn — Must be heard for 200 feet.

License plate light — One white license plate light must be lighted whenever theheadlight is on and must make the license plate visible at least 50 feet away.

Muffler — Must be in constant operation and properly maintained to prevent anyexcessive or unusual noise. Modification of an exhaust system for the purpose ofincreasing the noise level is prohibited by law.

Rearview mirror — Must reflect a view of at least 200 feet.

Seat — Drivers are prohibited from carrying passengers unless the vehicle hasbeen designed to carry two people. Everyone riding a motorcycle must sit astridethe seat, face forward, with one leg on each side of the motorcycle.

Stoplight — One red light, actuated by the brake and visible for 500 feet.

Taillight — One red light, visible for 500 feet.

Note: Although a helmet is not required equipment under Illinois law, a riderwho wears a properly fitted helmet greatly reduces the chance of receiving afatal head injury in an accident, regardless of the vehicle’s traveling speed.

4 3

Answers to above Knowledge Test:1-b 2-c 3-c 4-b

Answers to Test Yourself (previous pages):1-c 2-d 3-d 4-a 5-b 6-c 7-d8-d 9-c 10-c 11-d 12-a 13-a 14-c

KNOWLEDGE TEST — SAMPLE QUESTIONS

1. It is MOST important to flash your brake light when:a. Someone is following too closely.b. You will be slowing suddenly.c. There is a stop sign ahead.d. Your signals are not working.

2. The FRONT brake supplies how much of the potential stopping power?a. About one-quarter.b. About one-half.c. About three-quarters.d. All the stopping power.

3. To swerve correctly:a. Shift your weight quickly.b. Turn the handlebars quickly.c. Press the handlegrip in the direction of the turn.d. Press the handlegrip in the opposite direction of the turn.

4. In the illustration at right, the car at leftis waiting to enter the intersection. It isbest to:a. Make eye contact with the driver.b. Reduce speed and be ready to react.c. Maintain speed and position.d. Maintain speed and move right.

4 4

Motorcycle Rider Safety Training Program Regional Centers

ANorthern Illinois UniversityMotorcycle Safety ProjectDivision of Continuing EducationDeKalb, IL 60115-2854800-892-9607815-753-1683www.online.niu.edu/mcycle

BIllinois State UniversityMotorcycle Safety EducationHealth Science DepartmentNormal, IL 61790-5221800-322-7619309-438-2352www.ilstu.edu/depts/mcsafety/

CUniversity of IllinoisMotorcycle Rider ProgramDept. of Community Health#4 Gerty Dr.Mail Code 678Champaign, IL 61820800-252-3348217-333-7856www.mrc.uiuc.edu

DSouthern Illinois University-CarbondaleMotorcycle Rider ProgramCenter for Injury Control and Work Site Health PromotionCarbondale, IL 62901-6731800-642-9589618-453-2877www.siu.edu/~cycle

For course dates, times and locations, please contact your Regional Center.

Illinois Secretary of State Jesse White thanks the Motorcycle Safety Foundation for its assistance with this manual.

Diagrams and drawings used in this manual are for reference only and are not to correct scale for size of vehicles and distances.

4 5

• A moped is a motor-driven cycle with speeds attainable in one mile of between20 mph and 30 mph.

• Equipped with a motor that produces 2 brake horsepower or less.• If an internal combustion engine is used, the displacement shall not exceed

50cc.• Power drive system does not require the operator to shift gears.

All four criteria must be met, otherwise it is a motor-driven cycle and a Class Lis required.

A moped may be operated with any current, valid driver’s license of any classifi-cation.

CLASSIFICATION CRITERIA

Motorcycle: 150cc and over(two-, three- or four-wheel)

CLASS M

Motor-Driven Cycle: 1cc-149cc(two-, three- or four-wheel)

CLASS L

MOPED

4 6

MOTORCYCLETwo-wheel/single track

MOTORCYCLE W/SIDECARThree-wheel/double track

TRIKEThree-wheel/triple track

Two-Wheel and Three-Wheel MotorcyclesMany variations of vehicles are commercially available and have driven the needfor different tests. Understanding the differences among these vehicles is impor-tant when selecting or administering a Rider Skill Test. A common term is “track”and refers to the number of separate wheel impressions on a soft surface if thevehicle was driven in a straight line through it.

4 7

♻ Printed on recycled paper. Printed by authority of the State of Illinois. October 2013 — 100M — DSD X 140.12

For more information about motorcyclelicensing or examination, contact your

local Secretary of State Driver Services facility, or call:

800-252-8980

I l l inoisMotorcycleoperator manual