motor equipment news february 2012

See page 36

$6 incl GSTFebruary 2012NewsNewsNewsNews

TOP STORIES� Top Stories� World Skills winner� Tool supplier review� Recycled parts

Zooming into 2012

SLIMLINE L.E.D TRAILER LIGHTING

NARVA L.E.DTHE CHOICE IS EASY

* This warranty guarantees the operation of the L.E.D components for a period of 5 years and does not cover physical damage, abuse or normal wear and tear.

MODEL 34

� Vibration resistant and maintenance free� Virtually unbreakable polycarbonate lens� Fully ADR approved� Ideal for box and boat trailers

Narva New Zealand Ltd.22–24 Olive Road (P.O. Box 12556), Penrose, Auckland. N.Z. Phone: (09) 525 4575 Fax: (09) 579 1192

MODEL 3612V12V

Australasia’s largest distributor of automotive electrical and thermal control parts to the independent

automotive aftermarket.

www.ashdown-ingram.co.nz THE SPECIALIST’S CHOICE

this month Ed Speak

11330 NETT CIRCULATIONSix months Ended 1st Half 2008

Editor: Robert BarryEmail: [email protected] Editor Automotive: John OxleyEmail: [email protected]: Bernard CarpinterAutomotive Group Sales Manager: Dan PrestigeEmail: [email protected] Email: [email protected] Publisher: Cathy ParkerEmail: [email protected] Manager/Enquiries: Hilary KeenEmail: [email protected] Circulation Manager: Kim McIntoshEmail: [email protected] Reading: George WardAdrenalin Publishing Ltd14C Vega Place, Mairangi BayPO Box 65092 Mairangi Bay, Auckland 0754 Phone: 09 478 4771 • Facsimile: 09 478 4779Subscriptions: Motor Equipment News - an 11 issue magazine subscription in New Zealand is $59 (incl GST). Please call us for overseas rates.

ContentsFebruary 2012

2 www.motorequipmentnews.co.nz

this month

Contents

Copyright Motor Equipment News is copyright and may not be reproduced in whole or in part without the written permission of the publisher. Neither editorial opinions expressed nor facts stated in advertisements are necessarily agreed to by the editor or publisher of Motor Equipment News and, whilst all efforts are made to ensure accuracy, no responsibility will be taken by the publishers for inaccurate information, or for any consequences of reliance on this information.

Printing: GEONISSN 1175-1908Website www.motorequipmentnews.co.nz

11,051 NETT CIRCULATIONSix months ended second half 2010

Tool Feature 20

Recycled Parts 28

Panel and Paint 34

Motorsport 36

Classifieds 38

Business Directory 39

Welcome to 2012Belated happy New Year greetings to all Motor

Equipment News subscribers and readers. I hope that you all had a pleasant break despite the weather not being as helpful as it could have been.

I started a painting project at home that got slightly interrupted, but the rainy weather gave me an excuse to catch up on some light reading and catch a few movies, which was nice. For those of you who have young children, I really do recommend taking them to Puss in Boots, it’s a movie that speaks to both kids and adults. I felt that Sherlock Holmes was also worth the ticket price despite unfavourable reviews by some critics.

Despite the title of the magazine, MEN isn’t just about equipment news. We also feature stories on parts and new technology and features articles on how to run your business more efficiently and more effectively.

Planning staff training for the year is always a good idea at this time and you can read about the Bosch training offer for 2012 on page 16.

On a more serious note, the New Zealand Police have set up a stolen vehicle database, details of which

can be found on page 18. Workshop owners always need to be wary of dodgy characters and this is one database that could prevent them from any future heartache of working on cars that may not be legit.

This issue of Motor Equipment News has started the year with a particular focus on new equipment and tools. I hope you all take a moment to browse through the tool feature which starts on page 20. There are some interesting products coming through from our advertisers which will go down well in a busy workshop environment.

Our motorsport section has also veered into a new direction with Bernard Carpinter reporting on the renaissance of motorcycle road and circuit racing in New Zealand. While there has been considerable interest in the off-road race scene, road and circuit races seems to have taken a back seat, but that could be about to change, with some new fresh faces making their debut. You can read more about these brave young men on page 36.

Kindest regards,Robert

brave young men on page 36.

Kindest regards,

Century Equipment DistributorsPhone 04 567 1405

[email protected] www.centurydistributors.co.nz

Suppliers to Those Setting the Standards

Buy NZ’s number 1 selling 4Ton Clear Floor Hoist, model number Heshbon/Century HL-26K during the month of February and March and get “FREE” the worlds best drill sharpener, the Darex DD-750X,

saving $500.00, conditions apply etc

Century Equipment DistributorsPhone 04 567 1405

[email protected] www.centurydistributors.co.nz

Suppliers to Those Setting the Standards

HESHBON 4POST HOISTS4 models available

Remote controlExtra wide jacking beams available

From $8,000.00exc

LEASE OPTIONS AVAILABLE

CENTURY MID RISE LIFTPerfect for tyre fitting

brake and suspension workSingle phase

From $4,495.00exc


HESHBON 4 TON Clear floor hoists

NZ’s #1 2 post hoist 4 tonne

From $5,800 excl


CENTURY TYRE CHANGER WITH HELP ASSIST ARM Model # CEN-990A +

HF 200, Up to 24” clamping Single or three phase, available with or

without help assist arm, under table inflation standard on model shown


CENTURY WHEEL BALANCERModel CEN-900A

Comes standard with hoodAutomatic start




Free Darex drill sharpener – saving $500,

be quick limited numbers

HESHBON 4 TON Clear floor hoists


Our full range is at www.georgestock.co.nz or ph: 0800 863 784 (0800 TO EQUIP)

or email us on [email protected]

Auckland: 8 Te Apunga Pl, Mt Wellington,Ph:09 270 7219, Fax:09 270 7227.

Wellington: Ph: 027 294 2002

Christchurch: 15C Byron St, Sydenham,03 366 5560 or 027 489 2276

BRIAN FOLEY

027 493 7911

WILLIAM SINGLETON

027 473 1061

BRENT GRINDLEY

027 489 2276

PETER KEYS

027 475 4024

STEVE GREER

027 496 6409

GRAEME MARRIS

027 294 2227

SHAUN McGOWAN

027 294 2002

South IslandEquipment Sales Team

Daily finance amount shown is approximate and based on a 5 day working week with repayments over 5 Years and No Deposit through Capricorn Finance. 3 months FREE extended credit available or finance available from 3 months to 5 years from 8.45%. Marac Finance also available.

MEN

0212NEW CHRISTCHURCH

ADDRESS

30 YEARS SUPPLYING LEADING FRANCHISE DEALERS, NATIONAL TYRE STORES, AND INDEPENDENT WORKSHOPS. WE HAVE 1000’S OF MACHINES IN DAILY USE ACROSS NEW ZEALAND EARNING MONEY FOR THEIR OWNERS.

BOOST YOUR PROFITS WITH QUALITY EQUIPMENT FROM STOCKS.

4 Post Hoists & Scissor Lifts

Brake Testers

More Equipment

2 Post Hoists

KPX337WK Rav 2 Post Clear

Floor. Made in Italy. 3200Kg.

Spindle Type. $7.52 per day

SM40-47/RJ4500 Rotary 4 Tonne Service Hoist. 2 Tonne jacking beam included. $12.54 per day

TPF209VC Jig 2 Post Based, 4 Tonne Lift Capacity. Single Phase $3.99 per day

Stenhoj 4030W Made in Denmark.

4 Tonne Wheel Alignment hoist. 2 Tonne jacking

beam included. $24.91 per day

Stenhoj Maestro Clear Floor. Made in Denmark. New

Model Lifting Pads.

$10.86 per day

RFP14A Revolution

6 Tonne Wheel Alignment hoist

with Jacking beam. $17.15 per day

TPO309E Jig 2 Post Clear Floor– 4 Tonne Lift Capacity. Single or 3 Phase. $4.76 per day

SPOA10S5G5 Rotary 2 Post Clear Floor, 4.5 Tonne Lift Capacity. 3 Phase. $7.52 per day

Brake Check Handheld. Electronic Decelerometer. Only $1,149 + GST

MPP2240 Plate Brake Tester Cars & Vans, 4-tonne, above ground Installation, single phase 230V

IW2 Eurolane Full Test Lane. Brakes, Shocks & Side Slip Combo

Caorle Brake Lathe Lathe Discs On & Off Car. Made in Italy. From $15.83 per day

IW2 Euro Car. 3500Kg with PC. Made in Germany

RAV 640.20 Scissor Lift. Made in Italy. 2 Tonne

Jacking Beam included. $23.88 per day

Brand New Roller Brake Testers from $25.63 per day

from $7,995+GST

from only $3,195 + GST Installed

SM40LT-47 Rotary 4 Tonne Wheel Alignment hoist with built in scissor lifts & jacking beam. $18.09 per day

OMA Beam Setter (Head Light Aimer) Adjustable Dip Rate. Made in Italy. Only $1,249 + GST

WKES201 Swing Arm.

23" Clamping. Single Phase

$2.50 per day

WKET201 Tilt Arm.


$3.51 per day

WKETTI201 Tilt Arm

with Tubeless Inflation.

Single Phase$4.26 per day

WKETTII203 Tilt Arm with

Tubeless Inflation. 3 Phase.

$3.51 per day

Win-Align 4 Camera Adjustable Boom$42.66 per day

White Knight

World leading aligner

WKE712 32"Rim

Diameter. 75Kg Wheel

Weight. Single Phase

$3.20 per day

WKE701 26"Rim



$2.75 per day

from $17,890 + GST

A210 20"

Clamping. Single

Phase or 3 Phase

$5.89 per day

Italian Precision from $4,695+ GST

from $1,995 + GST


DSP706/DSP708 - 6 Toe or 8 Toe Sensor Head Pro-AlignWin-Align from $22.47 per day

Hawkeye Elite - 4 Camera Adjustable. New patented Target& Adaptor Design $47.68 per day

Pro-Align 2 Camera Adjustable Boom$27.99 per day

ASK STOCKS FOR A COMPETITIVE

PRICE ON AIR COMPRESSORS

QUALITY ALWAYS

WINS!

EM9350 New Model

Display Single Phase.

Rapid and Precise,

Ideal for High work loads

$8.15 per day

EM7450 New Model

30” Rim Diameter. Display, Single Phase $9.95 per day

EM8340 Electronic.

Variable Balancing

Speed

$11.29 per day

A2015TI 20"

Clamping. 3 Phase

$8.40 per day

A2025TI with

SP2000 help arm

24"Clamping. 3 Phase

$14.17 per day

A2025TIDV with SP2000

help arm 24"

Clamping. Single Phase,

Dual Speed

$15.67 per day

A2025TIDVLL with SP2000

help arm 24"Clamping.

leverless tyre

removal

$15.67 per day

A2030TI with

SP2000 help arm

26"Clamping.

Single Phase

$16.21 per day

See This Amazing New Wheel Aligner By Going To : www.hunter.com/alignment/hawkeye_elite /videos.cfm

Only

$47.68per day

For The New

Hawkeye Elite

Accurate Alignments Satisfied Customers

Increase Your Throughput

and Productivity Greater Profits

Increased Add On Sales New Tyres, Tie Rod Ends, Ball

Joints, etc.

NEW PRODUCTS

MADE IN USA

New Adaptor Design!Faster setups!No metal-to-metal contact!No knob twisting!

Less Weight!Weighs only 2.7 kg (6 lbs ) !Nearly 50% lighter than previous designs!

Space-Efficient Profile!Approx 226mm ( 9in. ) profile!Easy to work around!Great for narrow bays!

New Target Design!Lighter design!Narrower profile!Faster readings!

SEE THE CODELINK VIDEO ON

www.hunter.com

BONUS OFFERFREE HUNTER CODELINK

WORTH $2,195+GSTWITH EVERY NEW HAWKEYE

ELITE SOLD.

Artiglio 50 30"Clamping.

Leverless. Low

Profile & Run Flats

$21.21 per day

EM7240DDPR 30”Rim


Weight Single phase $6.14 per day

DOES WHEEL ALIGNMENTS IN UNDER 60 SECONDS

Our full range is at www.georgestock.co.nz or ph: 0800 863 784 (0800 TO EQUIP)

or email us on [email protected]

Auckland: 8 Te Apunga Pl, Mt Wellington,Ph:09 270 7219, Fax:09 270 7227.

Wellington: Ph: 027 294 2002

Christchurch: 15C Byron St, Sydenham,03 366 5560 or 027 489 2276

BRIAN FOLEY

027 493 7911

WILLIAM SINGLETON

027 473 1061

BRENT GRINDLEY

027 489 2276

PETER KEYS

027 475 4024

STEVE GREER

027 496 6409

GRAEME MARRIS

027 294 2227

SHAUN McGOWAN

027 294 2002

South IslandEquipment Sales Team

Daily finance amount shown is approximate and based on a 5 day working week with repayments over 5 Years and No Deposit through Capricorn Finance. 3 months FREE extended credit available or finance available from 3 months to 5 years from 8.45%. Marac Finance also available.

MEN

0212NEW CHRISTCHURCH

ADDRESS

30 YEARS SUPPLYING LEADING FRANCHISE DEALERS, NATIONAL TYRE STORES, AND INDEPENDENT WORKSHOPS. WE HAVE 1000’S OF MACHINES IN DAILY USE ACROSS NEW ZEALAND EARNING MONEY FOR THEIR OWNERS.

BOOST YOUR PROFITS WITH QUALITY EQUIPMENT FROM STOCKS.

4 Post Hoists & Scissor Lifts

Brake Testers

More Equipment

2 Post Hoists

KPX337WK Rav 2 Post Clear

Floor. Made in Italy. 3200Kg.

Spindle Type. $7.52 per day

SM40-47/RJ4500 Rotary 4 Tonne Service Hoist. 2 Tonne jacking beam included. $12.54 per day

TPF209VC Jig 2 Post Based, 4 Tonne Lift Capacity. Single Phase $3.99 per day

Stenhoj 4030W Made in Denmark.

4 Tonne Wheel Alignment hoist. 2 Tonne jacking

beam included. $24.91 per day

Stenhoj Maestro Clear Floor. Made in Denmark. New

Model Lifting Pads.

$10.86 per day

RFP14A Revolution

6 Tonne Wheel Alignment hoist

with Jacking beam. $17.15 per day

TPO309E Jig 2 Post Clear Floor– 4 Tonne Lift Capacity. Single or 3 Phase. $4.76 per day

SPOA10S5G5 Rotary 2 Post Clear Floor, 4.5 Tonne Lift Capacity. 3 Phase. $7.52 per day

Brake Check Handheld. Electronic Decelerometer. Only $1,149 + GST

MPP2240 Plate Brake Tester Cars & Vans, 4-tonne, above ground Installation, single phase 230V

IW2 Eurolane Full Test Lane. Brakes, Shocks & Side Slip Combo

Caorle Brake Lathe Lathe Discs On & Off Car. Made in Italy. From $15.83 per day

IW2 Euro Car. 3500Kg with PC. Made in Germany

RAV 640.20 Scissor Lift. Made in Italy. 2 Tonne

Jacking Beam included. $23.88 per day

Brand New Roller Brake Testers from $25.63 per day

from $7,995+GST

from only $3,195 + GST Installed

SM40LT-47 Rotary 4 Tonne Wheel Alignment hoist with built in scissor lifts & jacking beam. $18.09 per day

OMA Beam Setter (Head Light Aimer) Adjustable Dip Rate. Made in Italy. Only $1,249 + GST

WKES201 Swing Arm.


$2.50 per day

WKET201 Tilt Arm.


$3.51 per day

WKETTI201 Tilt Arm

with Tubeless Inflation.

Single Phase$4.26 per day

WKETTII203 Tilt Arm with

Tubeless Inflation. 3 Phase.

$3.51 per day


White Knight


WKE712 32"Rim



$3.20 per day

WKE701 26"Rim



$2.75 per day

from $17,890 + GST

A210 20"

Clamping. Single

Phase or 3 Phase

$5.89 per day

Italian Precision from $4,695+ GST

from $1,995 + GST


DSP706/DSP708 - 6 Toe or 8 Toe Sensor Head Pro-AlignWin-Align from $22.47 per day

Hawkeye Elite - 4 Camera Adjustable. New patented Target& Adaptor Design $47.68 per day

Pro-Align 2 Camera Adjustable Boom$27.99 per day

and No Deposit through Capricorn Finance. 3 months FREE extended credit available or finance available from 3 months to 5 years from 8.45%. Marac Finance also available.

Made in Italy. $15.83

MadeOnly+ GSTASK STOCKS

FOR A COMPETITIVE PRICE ON AIR

COMPRESSORS

30 YEARS SUPPLYING LEADING FRANCHISE DEALERS, NATIONAL TYRE STORES, AND INDEPENDENT WORKSHOPS. WE HAVE 1000’S OF MACHINES IN DAILY USE ACROSS NEW ZEALAND EARNING MONEY FOR THEIR OWNERS


QUALITY ALWAYS

WINS!

EM9350 New Model

Display Single Phase.

Rapid and Precise,

Ideal for High work loads

$8.15 per dayper day

EM7450 New Model

30” Rim Diameter. Display, Single Phase $9.95 per day

EM8340 Electronic.

Variable Balancing

Speed

$11.29 per day

Clamping.

A2015TI 20"

Clamping. 3 Phase

$8.40 per day

Italian Precision

A2025TI with

SP2000 help arm

24"Clamping. 3 Phase

$14.17 per day

A2025TI

Clamping.

A2025TIDV with SP2000

help arm 24"

Clamping. Single Phase,

Dual Speed

$15.67 per dayper day

A2025TIDVLL with SP2000

help arm 24"Clamping.

leverless tyre

removal

$15.67 per day

A2025TIDVLL

Clamping.

A2030TI with

SP2000 help arm

26"Clamping.

Single Phase

$16.21 per day

See This Amazing New Wheel Aligner By Going To : www.hunter.com/alignment/hawkeye_elite /videos.cfm

Only

$47.68per day

For The New

Hawkeye Elite

Accurate Alignments Satisfied Customers

Increase Your Throughput

and Productivity Greater Profits

Increased Add On Sales New Tyres, Tie Rod Ends, Ball

Joints, etc.

NEW PRODUCTS

MADE IN USA

New Adaptor Design!Faster setups!No metal-to-metal contact!No knob twisting!

Less Weight!Weighs only 2.7 kg (6 lbs ) !Nearly 50% lighter than previous designs!

Space-Efficient Profile!Approx 226mm ( 9in. ) profile!Easy to work around!Great for narrow bays!

New Target Design!Lighter design!Narrower profile!Faster readings!

SEE THE CODELINK VIDEO ON

www.hunter.com

Tie Rod Ends, Ball Tie Rod Ends, Ball Joints, etc.Joints, etc.

CODELINK

www.hunter.com

BONUS OFFERFREE HUNTER CODELINK

WORTH $2,195+GSTWITH EVERY NEW HAWKEYE

ELITE SOLD.

Artiglio 50 30"Clamping.

Leverless. Low

Profile & Run Flats

$21.21 per day $8.15

Clamping. EM7240DDPR

30”Rim Diameter.

70Kg Wheel Weight Single phase $6.14 per day

Daily finance amount shown is approximate and based on a 5 day working week with repayments over 5 Years

www.hunter.com/alignment/hawkeye_elite /videos.cfm

www.hunter.com

DOES WHEEL ALIGNMENTS IN UNDER 60 SECONDS

$1,995


NEWS

Quality Equipment Affordable Price

www.cbglimited.co.nz 09 827 2235Parts & Labour Warranty’s

2 Post HoistsFrom $2,950*

Start up Combo PackageTyre Machine & Wheel

Balancer

$3,890*

Dl450 & CB702

B800 Leverless is one of the world’s most advanced Tyre

changer

Ark Wheel AlignmentGerman 8CCD Camera, Touch screen available

from $13,995* *Prices + GST

*Delivery may apply*Installation not included in PriceFinance subject to normal lending criteria, GST as deposit

Spray Booths from

$19,950*

Quality equipment affordable price

A new era begins for Century

A new year brings a fresh new start for Century Distributors (NZ) with Bruce Mason retiring to spend more time enjoying his favourite pastimes, which are hunting, fishing and traveling around New Zealand.

John Jenkins and Bruce started Century Distributors (NZ) more than 15 years ago and have in that time they say they have seen many changes in the motor trade workshop equipment industry, a lot for the better and many that they say they are personally responsible for.

“Although it will be sad to end a successful partnership, all will not be lost without Bruce and his knowledge of the industry, believe me, we will

have him in on a semi regular basis helping out,” says John.

“Bruce’s retirement gave us a good opportunity to look back, reflect, look forward and refocus, he says. “When one looks back it is easy to see things that should have, or may have been done differently, so starting 2012 will see some positive changes put into place.”

John says the initial changes will be:• Rebrand the company so it will be become

known as Century Equipment Distributors (NZ).• Rebrand equipment such as hoists, tyre

changers, balancers, brake rollers, spray booths, truck lifts as Century brand.

• Discontinue supply of products/brands that no longer meet market requirements or receive little factory support.

•Discontinue supplying products that Century Equipment doesn’t have the expertise to offer ongoing support for.

“We feel it is easier to market one brand instead of a number of brands, plus we feel there is less confusion for the end user by providing them a name that they can trust,” says John.

“As far as our valued and loyal customer base is concerned, there are absolutely no changes that will have any affect on them in anyway,” says John.

“However they can rest assured that they will still be dealing with the market leader, they will still be getting a great product at a fair price and equipment that Century are happy to put its own name behind.

“Century Equipment Distributors (NZ) is the only Wellington-based importer and distributor of automotive equipment,” says John.

“We will stay in Wellington as this is where home is and it is central to all of New Zealand. We can usually deliver any equipment in New Zealand within a 24 hour period.”

REAdER REPly 01124

Ph: 09-250 3560 Fax: 09-277 6190

*Finance subject to approval.

(36 months with GST as deposit).

LOOKING FOR EQUIPMENT?✔ A name you can trust✔ After sales support and training✔ Biggest range ex-stock

Summit 3000kgs. 240V Mobile Mid-Rise Tyre/Brake Scissor Lift. With Optional 4WD Kit and Drive-On Ramps. ST3200

4000kgs. Capacity,“Extra Wide”

between posts, asymmetric design!

Included...4WD Pick-Up

Extensions

ST4200 Clear Floor$3,450 + gst

or

*$30.00p/week

ST4000 Base Model$3,125 + gst or

*$27.00p/week

Summit 4000kgs.Alignment Liftwith 2x Jacking Beams. Features 5126mmplatform forbig vehicles.Meets AS/NZ HoistStandard. *$97.00

p/week

SUMMIT/Powerrex 2-4 Post Hoists / Scissor Lifts

*$31.00p/week

PROFITABLE ALIGNER & HOIST

PACKAGES!HofmannGeoliner® 650 3D

Wheel Aligner with Powerrex SL3600A 4000kgs. 4-post alignment hoist, own from *$280 p/week or $36,450 + gstor the Summit Wheel Aligner with the same Powerrex 4-post hoist, own from *$192 p/week or $24,945 + gst.

CALL NOW FOR

MORE INFO

OR A LIVE DEMO!

COMBO DEALS

Meets AS/NZ Hoist Standard

Pick UpExtensionsRound or

Square

Supplied Standard

ST3000 Summit Double Scissor Lift, so low you don’t need to mount in-ground! 3000kgs. capacity, perfect for lowered vehicles. Min. height: 115mm.

*$48.00p/week

2900M Powerrex 2-Post, 4000kgs. Clear Floor Hoist. Single or 3-phase with asymmetric arm design.

*$39.00p/week

With ManualDescent Lever

SL3500W Powerrex 4-Post, 4000kgs. Hoist, 415V. Wider between post to suit large vehicles. Longer platformthan market standard fi t. Operates on control panel or cable remote.

*$66.00p/week

Optional Ratchet Arm

*Mention this advert when order placed and receive a FREE $500

Tool Voucher (Conditions apply).

Director and Sales - Heavy Vehicle Equipment - BRETT HIGGINS 027 448 0848Heavy Lifts - ED HIGGINS 027 482 2422South Island - GENE WYNGAARD 027 444 4771

General Equipment - VICTOR COBB 027 270 1890General Equipment - TREVOR WILLS 027 433 7386Diagnostics / Sales / Support - ED BAARD 027 435 9898email: [email protected]

QUALITY WORKSHOP SOLUTIONS - From a NZ company with over 50 years of service to the NZ automotive industry!

Summit 1600TI

Tyre Fitting SolutionsSummit 1700TI

Summit 1900TI

*$27.00p/week

*$34.00p/week

*$50.00p/week

• Single phase• Clamps to 24” rims

• Single or 3-phase with helper arm• Clamps to 24” rims

• 3-phase 2-speed with helper arms• Clamps to 30” rims

Wheel Balancing Solutions

*$29.00p/week

Summit 1250 GeneralPurpose Balancer• Auto data entry rim size• Auto data entry rim offset• Auto start / stop via hood• Self diagnosis / Self calibration

Summit Megaspin 400-2• Mag wheels and 4x4 specialist• Super fast, less than 7 seconds• All weights applied at 12 o’clock - simple• Single spin for stick-on wheel weights• Rims up to 30” diameter x 20” wide• Full auto data entry (no ext. arm)

Need assistance in selecting a SCAN TOOL for your workshop? We have trained staff who can assist!

560ALXSPS1 The Autologic Solution. Closest to factory tools for Euro. From $14,995 + gst or *$118 p/week.

824SCANVCI Carman VCI. Turns your PC into wireless scan tool. From $4,500 + gst or *$38 p/week.

824SCANATFK Carman Scan AT Full Kit. The ultimate user-friendly professional scan tool! Efficient, fast & inexpensive. From $6,500 + gst or *$53 p/week.

848CS538C Auto Diagnostic Scanner. With a powerful diagnostic platform for U.S., Asian, Australian and European vehicles. Features colour display and user-friendly interface. With free software updates for 2 years. From $2,995.00 + gst or *$26 p/week.

*$50.00p/week

THE SULCO BENEFITS:

Contact the SCAN MAN, Ed Baard, 027 435 9898

✔ Nationwide✔ Payment options✔ Risk free purchase

$3,695 + gst or

$11,995 + gst or

$5,850 + gst or

$4,650 + gst or

$8,200 + gst or

$3,125 + gst or

$3,995 + gst or

$6,065 + gst or

$6,100 + gst or

$3,295 + gst or

NOTE: Hoist prices exclude deliveryand installation.Call for aquote.

NEWS

Ph: 09-250 3560 Fax: 09-277 6190

*Finance subject to approval.

(36 months with GST as deposit).

LOOKING FOR EQUIPMENT?✔ A name you can trust✔ After sales support and training✔ Biggest range ex-stock

Summit 3000kgs. 240V Mobile Mid-Rise Tyre/Brake Scissor Lift. With Optional 4WD Kit and Drive-On Ramps. ST3200

4000kgs. Capacity,“Extra Wide”

between posts, asymmetric design!

Included...4WD Pick-Up

Extensions

ST4200 Clear Floor$3,450 + gst

or

*$30.00p/week

ST4000 Base Model$3,125 + gst or

*$27.00p/week

Summit 4000kgs.Alignment Liftwith 2x Jacking Beams. Features 5126mmplatform forbig vehicles.Meets AS/NZ HoistStandard. *$97.00

p/week

SUMMIT/Powerrex 2-4 Post Hoists / Scissor Lifts

*$31.00p/week

PROFITABLE ALIGNER & HOIST

PACKAGES!HofmannGeoliner® 650 3D

Wheel Aligner with Powerrex SL3600A 4000kgs. 4-post alignment hoist, own from *$280 p/week or $36,450 + gstor the Summit Wheel Aligner with the same Powerrex 4-post hoist, own from *$192 p/week or $24,945 + gst.

CALL NOW FOR

MORE INFO

OR A LIVE DEMO!

COMBO DEALS

Meets AS/NZ Hoist Standard

Pick UpExtensionsRound or

Square

Supplied Standard

ST3000 Summit Double Scissor Lift, so low you don’t need to mount in-ground! 3000kgs. capacity, perfect for lowered vehicles. Min. height: 115mm.

*$48.00p/week

2900M Powerrex 2-Post, 4000kgs. Clear Floor Hoist. Single or 3-phase with asymmetric arm design.

*$39.00p/week

With ManualDescent Lever

SL3500W Powerrex 4-Post, 4000kgs. Hoist, 415V. Wider between post to suit large vehicles. Longer platformthan market standard fi t. Operates on control panel or cable remote.

*$66.00p/week

Optional Ratchet Arm

*Mention this advert when order placed and receive a FREE $500

Tool Voucher (Conditions apply).

Director and Sales - Heavy Vehicle Equipment - BRETT HIGGINS 027 448 0848Heavy Lifts - ED HIGGINS 027 482 2422South Island - GENE WYNGAARD 027 444 4771

General Equipment - VICTOR COBB 027 270 1890General Equipment - TREVOR WILLS 027 433 7386Diagnostics / Sales / Support - ED BAARD 027 435 9898email: [email protected]

QUALITY WORKSHOP SOLUTIONS - From a NZ company with over 50 years of service to the NZ automotive industry!

Summit 1600TI

Tyre Fitting SolutionsSummit 1700TI

Summit 1900TI

*$27.00p/week

*$34.00p/week

*$50.00p/week

• Single phase• Clamps to 24” rims

• Single or 3-phase with helper arm• Clamps to 24” rims

• 3-phase 2-speed with helper arms• Clamps to 30” rims

Wheel Balancing Solutions

*$29.00p/week

Summit 1250 GeneralPurpose Balancer• Auto data entry rim size• Auto data entry rim offset• Auto start / stop via hood• Self diagnosis / Self calibration

Summit Megaspin 400-2• Mag wheels and 4x4 specialist• Super fast, less than 7 seconds• All weights applied at 12 o’clock - simple• Single spin for stick-on wheel weights• Rims up to 30” diameter x 20” wide• Full auto data entry (no ext. arm)

Need assistance in selecting a SCAN TOOL for your workshop? We have trained staff who can assist!

560ALXSPS1 The Autologic Solution. Closest to factory tools for Euro. From $14,995 + gst or *$118 p/week.

824SCANVCI Carman VCI. Turns your PC into wireless scan tool. From $4,500 + gst or *$38 p/week.

824SCANATFK Carman Scan AT Full Kit. The ultimate user-friendly professional scan tool! Efficient, fast & inexpensive. From $6,500 + gst or *$53 p/week.

848CS538C Auto Diagnostic Scanner. With a powerful diagnostic platform for U.S., Asian, Australian and European vehicles. Features colour display and user-friendly interface. With free software updates for 2 years. From $2,995.00 + gst or *$26 p/week.

*$50.00p/week

THE SULCO BENEFITS:

Contact the SCAN MAN, Ed Baard, 027 435 9898

✔ Nationwide✔ Payment options✔ Risk free purchase

$3,695 + gst or

$11,995 + gst or

$5,850 + gst or

$4,650 + gst or

$8,200 + gst or

$3,125 + gst or

$3,995 + gst or

$6,065 + gst or

$6,100 + gst or

$3,295 + gst or

NOTE: Hoist prices exclude deliveryand installation.Call for aquote.


NEWS

PERFORMANCE INNOVATION DEVELOPED EXCLUSIVELY BY, WITH AND FOR EXPERTSIntroducing our new range of Castrol Professional engine oils, now micro filtered to the world’s leading new car manufacturer specifications when filling new vehicle engines for the first time. This innovation has been proven through extensive consumer research to be an advantage that your customers value.

For more information phone Castrol on 0800 CASTROL (227 876).

6679_CATR GEMSTONE MEN AD.indd 1 22/09/11 10:33 AM

Volkswagen’s lucky seven New Zealand has become the first country in the

Asia Pacific region to complete the master technician programme by qualifying seven master technicians according to Volkswagen standards.

The aim of the program is to secure and further enhance the service quality of the Volkswagen brand worldwide, thereby increasing customer satisfaction. In the current economic climate customers are keen to keep their vehicles in the highest possible condition and with seven master technicians on their team, Volkswagen NZ is now in a position to ensure this is possible.

The certificates were presented to the Master Technicians by Volkswagen NZ general manager Dean Sheed at an awards ceremony in November. The awards ceremony was attended by all Volkswagen service managers and demonstrates the high esteem in which these qualifications are held and the commitment of Volkswagen NZ to developing its employees to the highest standards.

To achieve Master status each technician completed rigorous training that comprised 14 modules combined into six courses over 18 months. The final exam is composed of five practical exams, three theory exams and a verbal communication exam. A total of six hours of testing for each participant is conducted over two days. The exams follow the strict guidelines from the

factory and were supervised by the regional technical training manager from Singapore, Mr Stephen Belling.

“Aftersales support is an integral part of the support mechanism required to ensure total customer satisfaction after the sale,” says VW NZ national service manager, Steve Wilson. “This qualification is the start of a process which will see at least one Master Technician in each dealership in the future. The growth of the Volkswagen brand in New Zealand and the retention of highly-skilled staff is imperative for success.

“VW importer (European Motor Distributors) sees this milestone as an important step to not only raise

technical competence but also to set the scene for others to follow. Volkswagen in New Zealand is growing faster than any other European Brand and is set to break records in the future.”

(From left to right: Dean Sheed General Manager of Volkswagen NZ, Jared Lentfer of Ebbett Prestige, Mathew Archer of Euro City, Pierre Meyer of Giltrap Prestige, Anthony Johanson of Miles Continental, Neil Bauer of CCS, Darren Peattie of Bay Prestige, Scott Allchorne of Giltrap Prestige, Steve Wilson National Service Manager of Volkswagen NZ.)

magazinemagazinemagazineNZNZNZ4WD4WD4WD

www.nz4wd.co.nzwww.nz4wd.co.nzVisit our website

Only $52 What a deal!

$$

Grab a year’s subscriptiOn

REAdER REPly 01126

We've all abOut Off-rOadinG - 4Wd tests, places tO GO, 4Wd events.

NEWS

PERFORMANCE INNOVATION DEVELOPED EXCLUSIVELY BY, WITH AND FOR EXPERTSIntroducing our new range of Castrol Professional engine oils, now micro filtered to the world’s leading new car manufacturer specifications when filling new vehicle engines for the first time. This innovation has been proven through extensive consumer research to be an advantage that your customers value.


6679_CATR GEMSTONE MEN AD.indd 1 22/09/11 10:33 AM


NEWS NEWSNEWS

Stocks Equipment is launching into 2012 by introducing an all-new Corghi wheel balancer and offering a special deal on its high-tech Corghi A2025LL tyre changer, both Italian made and with a full two year warranty.

Joining the Corghi range this month is the brand new EM9350, an automatic wheel balancer that features dynamic balancing on both sides of the rim. Utilising 230V single-phase power, this is a fast-response, heavy-duty machine ideal for workshops with heavy workloads and is able to handle rims from 11-inch up to 28-inch in diameter.

Among its features is a laser pointer that helps to position the wheel weights more quickly and more precisely. The inside wheel light makes it easier to take measurements, apply wheel weights and clean and check that the rim is not damaged.

The spin unit has a reduced cycle time and higher performance, compared to other wheel balancers. The automatic measuring cycle and wheel slowing and electronic clamping system makes for easy operation and high productivity.

Other features include electronic acquisition of diameter and distance, as well as positioning of adhesive weights at 3-6-12 o’clock.

It is sized to work with high offset wheels without the need for spacers and, thanks to the large empty space between the body and flange, it is easy to reach the inner part of the wheel for cleaning and fixing the wheel weights.

The pedal-operated clamping brake makes both the wheel clamping option easier, along with the application of wheel weights.

A dual display control panel features quick and intuitive selection of the balancing mode and immediate access to the most common operating functions. Stocks Equipment is launching the new Corghi EM9350 in New Zealand at $6,495 plus GST.

At the same time, Stocks Equipment is offering a

Corghi deal kicks off new year

REAdER REPly 01128

special deal on the leverless version of the popular Corghi A2025TIDV tyre changer at just $9,995 plus GST, and to add even more spice to the deal, Stocks is also selling the optional SP2000 Help Arm for removing low profile tyres as a bonus offer for half price at just $1,250 plus GST.

“We wanted to kick off the year on a positive note and put all the bad economic news behind us and look forward, so this deal is all about opportunity – at these prices, the A2025LL and Help Arm models that we have in stock won’t hang around for very long,” says Stocks Equipment general manager William Singleton, adding that the deal will end when the current stock has run out.

The A2025LL is an advanced tyre changer that is packed with lots of features. It comes in a single phase and features dual speed with a 24" turntable,

allowing clamping 24" from the outside of the rim, in a conventional tyre changer style. This makes it ideal for workshops that don’t have three phase power. It also has a two speed turntable with speeds of six and 15 RPM, which means that operators can remove tyres a lot quicker that tyre machines with only a single speed turntable.

This model also features “Moto Inverter” which is an asynchronous motor with an integrated inverter (on-board control logic) developed by Corghi with built in safety equipment. It has an overload protection device which trips should the turntable jam, and resets itself when the control pedal is fully released, plus a self resetting integrated thermal cut–off should the Moto Inverter overheat.

The A2025LL works extreme ly easily and effectively on all wheel types (including RFT and low profile). The leverless technology enables quick demounting and tried-and-te sted conventional technology for mounting. Its greatest strengths are simplicity of use and absolute efficiency. It is compatible with wheel rim sizes up to 26" and wheel widths up to 14".Stocks Equipment is offering a special purchase deal

on the Corghi A2025LL.

The new Corghi EM9350 wheel balancer.

GM beefs up Volt safety

General Motors has announced enhancements to the vehicle structure and battery coolant system in the Chevrolet Volt that would further protect the battery from the possibility of an electrical fire occurring days or weeks after a severe crash.

The enhancements come in response to a National Highway Traffic Safety Administration Preliminary Evaluation to examine post-severe crash battery performance.

NHTSA opened a preliminary evaluation on November 25, 2011, following a severe-impact lab test on a battery pack that resulted in an electrical fire six days later. The test was conducted to reproduce a coolant leak that occurred in a full-scale vehicle crash test last May that resulted in an electrical fire three

weeks later.Through the first 11 months of 2011, Volt owners

accumulated nearly 20 million miles without an incident similar to the results in the NHTSA tests

“The Volt has always been safe to drive. Now, we will go the extra mile to ensure our customers’ peace of mind in the days and weeks following a severe crash,” says GM senior vice president global product development Mary Barra.

GM will conduct a program to further protect the Volt battery from the possibility of an electrical fire occurring days or weeks after a severe side crash. Modifications will:

• Strengthen an existing portion of the Volt’s vehicle safety structure to further protect the battery pack in a severe side collision.

• Add a sensor in the reservoir of the battery coolant system to monitor coolant levels.

• Add a tamper-resistant bracket to the top of the battery coolant reservoir to help prevent potential coolant overfill.

GM conducted four successful crash tests between

December 9 and 21 of Volts with the structural enhancement. The enhancement performed as intended. There was no intrusion into the battery pack and no coolant leakage in any of the tests.

“These enhancements and modifications will address the concerns raised by the severe crash tests,” say Barra. “There are no changes to the Volt battery pack or cell chemistry as a result of these actions. We have tested the Volt’s battery system for more than 285,000 hours, or 25 years, of operation. We’re as confident as ever that the cell design is among the safest on the market.”

The modifications and enhancements will be applied to all Volts, including vehicles sold in Europe. GM also says it will continue its leadership role in helping the Society of Automotive Engineers develop standards that will help tow truck operators, salvage yards and vehicle recyclers in the proper handling of electric vehicle components. GM will help develop educational materials that can be used by these stakeholders in the future.

REAdER REPly 01128A

www.motorequipmentnews.co.nz 9

NEWS NEWS


BUSINESS COLUMNNEWSNEWS

Home of affordable diagnostic toolsAlthough the Autel MaxiDas DS-708 scan tool

suits the majority of automotive workshops in NZ, due to its extensive vehicle coverage and low cost, there are always some exceptions. This is why GDC says it has added the FCAR–F3-D truck and bus scan tool and the CM Scan tool by Carman Global to its line-up of quality diagnostic tools.

Autel MaxiDas DS-708GDC Equipment says Autel is now recognised

globally by the automotive aftermarket industry as one of the fastest growing scan tool companies, which provides the most extensive and best price/performance ratio for OEM-level diagnostic products, backed up with first-class customer support.

This extremely user-friendly tool has all the features needed by workshops and contains one of the most comprehensive vehicle software packages available, covering Japanese, Korean, European, American and Australian vehicles with multiple software updates available every week.

New Zealand customers can now purchase a DS-708 from the only factory-authorised distributor in NZ, GDC Equipment, for an unbelievably low price of just $3995 + GST says GDC. That also comes with the Australian software package included, two years of FREE software updates and a one year subscription Boyce Autodata valued at $1100 FREE. GDC says that’s value for money!

NEW – CM Scan Tool by Carman Global As everyone has different requirements, GDC has

added a new scanner to its line-up. This tool was released in Feb 2011 and was developed in Korea by newly created partnership between Carman Global and Hanatech who hold a software development supply contract . This tool has some great features and a low price of only $5995 + GST. It is supplied with two years FREE software updates easily download via an internet connection.

NEW - FCAR-F3-D Truck & Bus Scan ToolFCAR-F3-D is the newest addition of multi-

functional truck and bus scanners that are designed for the diagnosis of diesel engine electronic control systems in a variety of European, American, Japanese, Chinese and South Korean diesel power systems. GDC says this scan tool with its simple online software updates, a user friendly program, and a built-in printer provides excellent value for money at only $5450 +GST.

So, with the addition of these tools, GDC says people can compare different options to ensure they get the best tool to suit their individual requirements. With the low pricing GDC has on offer, it says customers could even buy two or three tools for the same price as some other suppliers charge for just one.

For those people who are serious about getting the very best value for money tools on the market according to GDC Equipment, call 0800 214 604 to arrange a demo or brochure or view the website www.automaster.co.nz for more information.

-

——

-----

CARMAN global

---

REAdER REPly 01129


NEWS

Elite offers sub 60 alignment

When Kevin Glover saw the performance figures for the all-new Hunter Elite, the next generation of the Hawkeye 3D wheel aligner range, he knew he’d have to get one for his East Tamaki store, BJ Tyres.

In fact, he turned out to be the first purchaser of the Elite model in New Zealand, after it was introduced late last year by Hunter’s sole distributor Stocks Equipment and says it has lived up to its promise as the fastest wheel aligner on the market.

“You can definitely do a wheel alignment check in under 60 seconds,” he says.

But what is more important is that the new Hunter Hawkeye Elite has more than halved the time taken to do a complete alignment job, which has already increased his business in the few weeks since it was installed.

BJ Tyres counts a number of panelbeaters in East Auckland as regular customers and says he often gets a call late on a Friday afternoon for two or three ‘rush jobs’ and it usually meant working late to complete them. But when two vehicles arrived one recent Friday at 4.30pm, they were both completed before 5pm.

“The trade is certainly impressed we can give them such a speedy service with this machine,” adds Kevin.

The Elite has also had a positive effect on the store’s retail business.

Kevin always offers wheel alignment with tyre jobs, but only a few were prepared to wait as much as 40 minutes with the old machine. But now he says they are happy with one minute for a check and then 10 or 12 minutes for a complete job.

Kevin says the key to the high-speed work of the Elite are new, patented unique QuickGrip (quick release) adaptors and three-dimensional targets that slash set-up times to seconds, rather than minutes. They use spring-loaded clamping arms that adjust easily to various wheel sizes, along with a simple thumb lever to lock the clamp in place.

They attach quickly, without having to worry about needing to perfectly centre the target, since the mounting position has no effect on measurement accuracy, gripping the tyre instead of the rim edge. This eliminates risk of damage to expensive alloy wheels – a protective rubber ring at the base of the adaptor provides the only contact with the wheel.

As soon as the clamps are fitted, the computer in the Elite matches the readings to the data on the vehicle stored in its memory bank and the information is flashed on screen almost instantly, once the vehicle roll-forward is completed, thanks to the WinAlign alignment software which runs on the latest Windows 7 operating system.

“I’m surprised at how quick it all happens and you’ve got the castor and other information on the screen, as well as toe – I like that,” says Kevin. “The graphics are very clear and easy to understand,” he adds.

He says the lighter weight of the adaptor and target assembly (they’re less than 3kg each) makes it easy to handle and install. Constructed from tough polymer materials, they can stand up to the rigours of daily workshop life and the target itself contains no electronics, so requires very little maintenance and there are no messy wires connecting the targets with the cabinet. Additionally, the assembly‘s ultra-compact profile creates more room in the work bay.

Also new and patented on the HawkEye Elite are the digital imaging sensors, incorporating four high-resolution cameras that instantly update adjustment readings on-screen – and adjust automatically for the height of the vehicle on the hoist. Working with the newly designed targets, HawkEye Elite sensors provide 3D modelling of wheel position and orientation for the most accurate alignment measurements.

Kevin will also be the first in New Zealand to get the new Codelink

system fitted to his Elite, which automatically takes care of steering angle sensor settings and also allows for ESP system to be reset on European and other vehicles, further simplifying the alignment task.

Other features that have won favour with Kevin are the larger 22-inch LCD monitor and the comprehensive vehicle data bank that has information on practically every vehicle on New Zealand roads. Live Ride Height targets also included with the package make alignments on Ford Falcons especially so much easier.

The previous Hunter machine at the BJ Tyre store had completed more than 5000 alignments before it was traded in on the new Elite, which has already handled close to 500 since its installation last November. In the first two days of owning the Hunter Elite, Kevin Glover did 27 wheel alignments alone proving that not only is this new model extremely fast, but also very profitable.

The Hunter Hawkeye Elite (HE421FMAB) is a premium model in the Hunter wheel alignment line-up, priced at $37,995 + GST, which includes delivery, installation and training.

Kevin Glover and the new Hunter Hawkeye Elite wheel aligner at BJ Tyres in East Tamaki.

BMW supply diesel engines to Toyota

BMW Group and Toyota Motor Corporation (TMC) recently announced a memorandum of understanding (MOU) concerning a mid-to-long-term collaboration on next-generation environment-friendly technologies.

Under the MOU, the two companies agreed on a collaborative research in the field of next-generation lithium-ion battery technologies. Furthermore, they have agreed to identify and discuss other possible collaborative projects.

In addition, Toyota Motor Europe (TME), TMC’s European subsidiary, and BMW Group have entered into a contract under which BMW Group is to supply 1.6 litre and 2.0 litre diesel engines to TME starting in 2014. The engines will be installed in certain Toyota-produced vehicles planned for sale in the European market. Through this agreement, Toyota plans to expand its European lineup and sales of fuel-efficient, low CO2-emission diesel-powered vehicles.

“We are now joining forces to further develop environment-friendly technologies and to expand our innovation leadership in each of our segments, says BMW AG management board chairman Norbert Reithofer. “Supplying Toyota with our fuel efficient and dynamic diesel engines represents another important step in the planned expansion of our sales activities for engines and power train systems.”

TMC President Akio Toyoda says it is a thrill to enter into this mid-to-long-term collaborative relationship with BMW, a company with its own culture and history from its many years of car manufacturing in Europe, and a company that makes cars that are fun to drive.

Mr Toyoda says in the spirit of contributing to furthering the development of the automotive manufacturing industry and society, both companies will bring their knowledge concerning environmental technologies to the table and make ever-better cars.

REAdER REPly 011210

REAdER REPly 011210A

Timing Belt Kit, 4 cylinder Voucher entitlement: $10

Timing Belt Kit, V6 and Diesel Voucher entitlement: $20

Filter Kit: Purchase any three filters for any one vehicle i.e. air, oil, fuel or pollen filter and receive a $10 Voucher

Add Drive Belts and a Water Pump to any timing belt kit order, and earn yourself another $10 Voucher

But hurry, offer ends 31st March 2012. Contact your local Hyundai dealer today!Vouchers are to be supplied via redemption, simply post a copy of your invoice along with your contact details to: Hyundai 30/30 Voucher

Promotion. PO Box 6240, Wellesley Street, Auckland 1141, by the 15th April 2012.

Simply purchase any one of the below selected products from an authorised Hyundai Parts Agent during February and March 2012 and you’re entitled to receive a FREE gift voucher from Hunting & Fishing New Zealand. Best of all there are no limits on how many vouchers you are entitled to. What’s more, continue to receive 30% off common service items, giving you 30% margin!* with our 30/30 Real Deal Trade Promotion.

BUY GENUINE HYUNDAI PARTS AND THERE COULD BE A CATCH

www.hyundai.co.nz/parts 0800 GET GEN (438 436) + EXT 25

*Offer only available from participating dealers, to trade customers only. HMNZ reserves the right to change pricing without notice. Conditions may apply.

QUALIFYING ITEMS AND VOUCHER VALUES

NEWS

Timing Belt Kit, 4 cylinder Voucher entitlement: $10

Timing Belt Kit, V6 and Diesel Voucher entitlement: $20

Filter Kit: Purchase any three filters for any one vehicle i.e. air, oil, fuel or pollen filter and receive a $10 Voucher

Add Drive Belts and a Water Pump to any timing belt kit order, and earn yourself another $10 Voucher

But hurry, offer ends 31st March 2012. Contact your local Hyundai dealer today!Vouchers are to be supplied via redemption, simply post a copy of your invoice along with your contact details to: Hyundai 30/30 Voucher

Promotion. PO Box 6240, Wellesley Street, Auckland 1141, by the 15th April 2012.

Simply purchase any one of the below selected products from an authorised Hyundai Parts Agent during February and March 2012 and you’re entitled to receive a FREE gift voucher from Hunting & Fishing New Zealand. Best of all there are no limits on how many vouchers you are entitled to. What’s more, continue to receive 30% off common service items, giving you 30% margin!* with our 30/30 Real Deal Trade Promotion.

BUY GENUINE HYUNDAI PARTS AND THERE COULD BE A CATCH

www.hyundai.co.nz/parts 0800 GET GEN (438 436) + EXT 25

*Offer only available from participating dealers, to trade customers only. HMNZ reserves the right to change pricing without notice. Conditions may apply.

Timing Belt Kit,Voucher entitlement:

Timing Belt Kit,Voucher entitlement:

Drive Belts and a Water Pump

QUALIFYING ITEMS AND VOUCHER VALUES


NEWS

Turn a standard battery into a power stationThe latest battery box from Projecta

turns an ordinary automotive battery into a convenient, user-friendly, portable power station that can be used as an auxiliary 12-Volt power source or for jump-starting a car or light commercial vehicle.

By simply fitting a standard car or light truck battery into the pre-wired box, you are ready to go, according to the local distributor of Projecta products, NARVA New Zealand.

Equipped with insulated terminals, plus cigarette lighter and accessory sockets, the Projecta BPE330 12-Volt Portable Battery Station is ideal for use in a dual battery system, acting as a central hub for powering a compressor fridge, camping lights or a

This new Projecta battery box turns

an ordinary car battery into a useful

portable power station

Not all oils are created equally

raft of other camp appliances. The new power station features an

LED battery analyser displaying the fitted battery’s state of charge and comes with a battery hold-down strap and fitting kit to provide a secure installation, plus convenient terminals with rubberised wing nuts for quick and easy connection.

Designed to suit N70Z-size batteries the Projecta 12V Portable Power Station is now available from leading automotive outlets throughout New Zealand at a very competitive price.

Many motorists are not aware that if their vehicle is fitted with low emission technology, the use of a wrong oil product can lead to severe and costly damage.

“We have seen a growing number of diesel particulate filter (DPF) failures from passenger and light commercial vehicles being serviced with the incorrect lubricants,” says Tony Blackburn from Total Lubricants.

“With stricter emission regulations being introduced, DPF units are now a common sight on many late model diesel vehicles from Europe and Asia and its imperative that the correct low SAPS lubricant is used when servicing such vehicles,” he says.

Low SAPS lubricants contain a reduced proportion of sulphated ash, phosphorus and sulphur. Formulated with an all-new generation of additives, the Total Quartz Ineo range considerably increases the

efficiency of anti-pollution systems, particularly the DPF, as the content of metallic components in the lubricant is reduced by 50 percent, which serves to increase the life span and efficiency of the DPF. Total Quartz Ineo MC3 is a new low SAPS range of fully synthetic engine oils from Total Lubricants. It has been designed primarily for the lubrication of high performance petrol and diesel engines both normally aspirated and turbo charged. The results of years of exhaustive development these products are designed to provide maximum protection under the most extreme driving conditions and are compliant with the latest and strictest OEM approvals including Mercedes Benz, BMW, Volkswagen, Hyundai and Kia.

The Quartz Ineo MC3 range is available in 2 viscosity grades: 5W-30 and 5W-40.

Hankook wins design award

A tyre that uses new technology to achieve a better balance between wet and dry performance and fuel efficiency has been recognised by the prestigious iF Design Awards in Germany.

Hankook's Ventus S1 evo2 received a Product Design Award in the competition, which attracted more than 4300 entries from 48 countries.

Established in 1953, the iF Design Awards are regarded as one of the three most important design competitions in the world.

Products are judged on several criteria, including design quality, choice of materials, environmental impact, safety and degree of innovation.

The Ventus S1 evo2 tyre features several innovations, such as triple-layered tread blocks which, as they wear down, increase the tyre's contact patch and therefore traction.

The tyre also uses an innovative pattern of grooves to generate surface air turbulence, resulting in improved heat dissipation.

The rubber compound of the tyre features a new high styrene polymer which reduces rolling resistance and therefore fuel consumption and CO2 emissions.

In 2009, Hankook became the first tyre company ever to win an IF award – receiving recognition for both its environmentally-friendly enfren and Optimo 4S tyre patterns.

The latest addition to Hankook's range of ultra-high performance (UHP) tyres, the Ventus S1 evo2 made its world premiere at the Frankfurt Motor Show in September 2011.

The Ventus S1 evo2 was developed at Hankook's technical centre in Germany and incorporates knowledge acquired by the company as exclusive tyre supplier to the German-based DTM touring car championship.

The iF Product Design Awards ceremony will take place in Munich on February 10.

REAdER REPly 011212


REAdER REPly 011212b

Ask about Total Quartz engine range at your local distributor, call 0800 868 256 or visit www.totalsolutions.co.nz* Promo price applies to 200L Drum. Promo dates 1 February to 31 March 2012. Price does not include GST or any applicable delivery charges.

TOTAL PERFORMANCEWITH

TOTAL QUARTZ

Quartz 7000

Synthetic Based 10W40

200L for $1050*

World Champion technology for your engine.The Quartz engine oil range has your clients covered.

From the Quartz INEO MC3 with new Low SAPS technology for vehicles with a diesel particulate filter to Quartz 7000 and 5000 with unique innovations that protect your engine during start-up, warm-up and drive. API SM/CF.

Road tested in the most extreme conditions.

DP

PI -

C L M

B B D O

NEWS

Total Oil (Oil Imports) new

Ask about Total Quartz engine range at your local distributor, call 0800 868 256 or visit www.totalsolutions.co.nz* Promo price applies to 200L Drum. Promo dates 1 February to 31 March 2012. Price does not include GST or any applicable delivery charges.

TOTAL PERFORMANCEWITH

TOTAL QUARTZ

Quartz 7000

Synthetic Based 10W40

200L for $1050*

World Champion technology for your engine.The Quartz engine oil range has your clients covered.

From the Quartz INEO MC3 with new Low SAPS technology for vehicles with a diesel particulate filter to Quartz 7000 and 5000 with unique innovations that protect your engine during start-up, warm-up and drive. API SM/CF.

Road tested in the most extreme conditions.

DP

PI -

C L M

B B D O

ATTN11TO

T67


NEWS

Ark appoints exclusive distributorArk Corporation has appointed

Automotive Supplies NZ Ltd (ASL) as its exclusive aftermarket distributor nationally through New Zealand.

The appointment of ASL means that New Zealand’s aftermarket retailers have access to the entire Ark range of towing, trailer and recreational four-wheel-drive parts and accessories. “We are delighted to be in partnership with ASL, and

Big Apple promotion winners

In October and November 2011 Repco/Appco ran a promotion where trade customers could go in the draw to win one of two $12,000 trips to New York.

The winners were drawn in mid- December and the branch managers of Repco Whakatane and Appco New Plymouth say they felt like Santa Claus on delivering the $12,000 worth of travel vouchers to the winning businesses.

Repco/Appco sends its congratulations to Kelly‘s Garage of Whakatane and New Plymouth Auto Electrical who will be winging their way to New York some time this year.

There was also 15 iPads up for grabs. Repco/Appco sends its congratulations to the trade customers

we are excited about the opportunity of bringing our unique range of parts and accessories to New Zealand’s outdoor enthusiasts,” says Ark founder and managing director Richard Arakelian.

“ASL have long regarded Ark products as being superior in design and functionality, so we’re really looking forward to being able to offer our customers the best

towing and trailer accessories on the market,” says ASL managing director Murray Eade.

ASL says it is already strongly positioned in the accessories aftermarket wholesale and trade

sector, and this distribution appointment will allow it to further consolidate its position as an industry provider.

Gates goes green

who each received a 16GB iPad to play with over Christmas.

Those customers included: • Cambridge Automotive, Cambridge • Kirwee Challenge, Hornby • J A Thwaities, Invercargill • Bell Automotive, Rotorua • Warren Anderson Motors, Palmerston North • BM Autobahn, Mt Maunganui • Stuart Law Automotive, Te Awamutu • ARB Northern, Whangarei • HiWay Auto Centre, Oamaru • Hollands Suzuki, Christchurch • Terry Gruebner Motors, Auckland• BP Marshlands, Northwood • Miramar Motors, Kilbirnie • Auto Technics Ltd, Morrinsville • C Moore Motors, Petone

Barricade is a new multi-fuel compatible hose that eliminates fuel vapour loss thanks to a unique five-layer GreenShield barrier technology used in its manufacture says Gates. The company says is one of the most environmentally- responsible fuel line hoses in the industry.

According to Gates, Barricade fuel injection hose copes easily with corrosive fuels, and is compatible with virtually all fuel – including E-85, Methanol and Ethanol based fuels.

The Barricade fuel injection line has GreenShield barrier technology which is a unique barrier material that reduces vapour permeation into the atmosphere and improves flexibility.

It is comprised of five layers:• Barrier tube: Synthetic rubber

tubing designed to resist high heat, oils and aggressive fuels like ethanol.

• GreenShield barrier: Patent-pending thermoplastic material that delivers the lowest permeation in the industry!

• Adhesion layer: Serves as a second defence against oils and aggressive fuels if the tube and/or thermoplastic barrier become compromised.

• Reinforcement: Spiral textile reinforcement gives resistance against

internal pressures and offers best in class working MPa.

• Cover: Synthetic rubber cover which is fuel and oil resistant, with outstanding ozone and heat resistance (a temperature range of -40°C to 135°C), this layer covers and protects the underlying components.

The Barricade fuel injection hose is made to high-quality standards so that workshops can offer a premium product to customers who will benefit from less downtime of hose replacement, according to Gates. It says Barricade hose is the best in its class for both high-pressure environments and low-permeation needs.

REAdER REPly 011214

REAdER REPly 011214A REAdER REPly 011214b

NEW

NEW NEW

NEW

NEW

NEW

NEWS

NEW

NEW NEW

NEW

NEW

NEW


NEWSNEWSNEWS

Knowledge for the new era

As vehicle systems grow in complexity and technicians spend an increasing amount of time performing in-depth diagnostic procedures, demand for technical training gains momentum, according to Bosch.

Bosch says sales of workshop test equipment are growing accordingly, with many business owners investing in engine testing modules, complex diagnostic scanners, and even wheel service equipment – once the realm of tyre and undercar specialists.

There is now a well-established group of workshops who have diversified their services to the extent whereby they are now equipped to meet the demands of almost every vehicle on the road – no matter how complex their electrical systems.

With so much investment in technical equipment, though, it is important for workshop operators to ensure there is sufficient knowledge inside their business to operate it at full potential. Time spent self-learning test procedures for various components is time better spent increasing daily vehicle turnover and, in turn, workshop revenue.

It is also important to ensure every technician in the business has a similar level of technical training. Given how prevalent diagnostic procedures have become, there is little point in larger workshops having just one or two staff members with adequate training. Why? Because these staff members will be constantly interrupted to provide support to others, which will noticeably affect productivity.

Implementing a blanket training regime across the entire business will mean that all staff are suitably trained; both in terms of modern vehicle systems, and the way in which to adequately test and replace

them using appropriate diagnostic equipment.Bosch says its technical training program for New

Zealand has been specifically designed to equip workshops for the new technology relevant to the market. These training courses also offer invaluable support to users of Bosch diagnostic equipment, making them the ideal partner for workshops that have made recent investments in this area.

And this ultimately sums up the unique value of the entire training program. Given Bosch is the key innovator across nearly all engine management systems, manufactures many of their replacement components, and designs the equipment to test them, the company says it is undoubtedly in the best position to offer the appropriate diagnostic training.

If you are a workshop owner looking to further empower your business, it is time to invest in technical training. Bosch’s 2012 Technical Training Program for Australia and New Zealand can be obtained by calling +61 3 9541 5553 or emailing [email protected].

Another successful round for BoschThe annual Golf day for the

NZ Bosch Car service and Bosch Diesel service network was held on December 2 and culminated in the annual Network Awards dinner which was held at the Novotel Auckland Airport.

Hosted by Bosch NZ country manager Mark Gardiner and his New Zealand team members Mark Malloy, Sean Randal and Lee Norris, the Golf day has become an annual event and drew members of both networks from both North and South Islands.

The event was also attended by senior members of Bosch management including Ken Ford who is the Asia Pacific regional president for automotive aftermarket and

Thomas Winter, the marketing director for Asia Pacific, as well as Oceania network manager Mark Jones.

Ken Ford spoke briefly to the assembled guests and reiterated that despite the small size and challenging nature within the New Zealand market, and the challenges of the varied carpark, it is still one that is important to Bosch and that the company will continue to support ongoing product initiatives and training programmes.

Mark Jones announced the next Australasian Bosch service

network convention will be held in Auckland from March 8 to 11 and he encouraged the members to take the opportunity

to meet and socialise while enhancing their knowledge and creating a platform to share ideas and technical experience with one another.

The retirement of Phil Robinson as Bosch Australias regional director has seen Damion Newsome relocate to Melbourne from the United Kingdom where he was previously country sales manager for the UK and Ireland. Damion Newsome told Motor Equipment News that he most definitely wants to see the development of a bigger and better car service and diesel service network.

Bosch wants to grow the New Zealand car service network from 58 members in 2011 to 100 in 2012, with the aim being 175 Bosch Car service outlets by 2015.

Guest speaker Jamie Fitzgerald from Inspiring Performance amused the audience with his wry stories about rowing across the Atlantic ocean with fellow adventurer Kevin Biggar, and then having conquered and won that race, they decided to walk on foot unaided to the South pole!

Bosch service network awardsMost supportive Bosch Diesel Service

Winner: Diesel Services Auckland

Runner Up: Turbo and Diesel Hamilton

Most supportive Bosch Car Service

Winner: Leading Edge Automotive

Runner Up: Mt Iron Automotive

Best New Business

Winner: Barry Clarke Automotive

Runner up: Western Auto Electrical

Dealer of the Year

Winner: Saxton Automotive

Runner up: Belfor Automotive

Golf Awards8th hole closest to the pin: Jonathan Patrice

13th hole closest to the pin: Tony Allen

15th hole closest to the pin: Thomas Winter

1st place team 49.35: Mike, Kerry, Pat, Steve

2nd place team 51.40: Jason, Steve, Scott, Darryn

3rd place team 51.67: Cathy, Bryan, Phil, Jonathon

Product Award winnersBosch brakes Partmaster Head office

Bosch belts Pan Pacific Hamilton

Bosch starters and alternators Pan Pacific Chch

Bosch batteries Bryce Arkle Autostop Penrose

Bosch ignition Civic Head Office

Bosch spark plugs Pan Pacific Wellington

Bosch wipers Partmaster Whangarei

Bosch million dollar distributors: Diesel distributors, Automotive Supplies Ltd, Pan Pacific

Distributor of the Year: PartmasterKen Ford

Mark Jones

REAdER REPly 011216


NEWS

Bosch service network awardsMost supportive Bosch Diesel Service

Winner: Diesel Services Auckland

Runner Up: Turbo and Diesel Hamilton

Most supportive Bosch Car Service

Winner: Leading Edge Automotive

Runner Up: Mt Iron Automotive

Best New Business

Winner: Barry Clarke Automotive

Runner up: Western Auto Electrical

Dealer of the Year

Winner: Saxton Automotive

Runner up: Belfor Automotive

Golf Awards8th hole closest to the pin: Jonathan Patrice

13th hole closest to the pin: Tony Allen

15th hole closest to the pin: Thomas Winter

1st place team 49.35: Mike, Kerry, Pat, Steve

2nd place team 51.40: Jason, Steve, Scott, Darryn

3rd place team 51.67: Cathy, Bryan, Phil, Jonathon

Product Award winnersBosch brakes Partmaster Head office

Bosch belts Pan Pacific Hamilton

Bosch starters and alternators Pan Pacific Chch

Bosch batteries Bryce Arkle Autostop Penrose

Bosch ignition Civic Head Office

Bosch spark plugs Pan Pacific Wellington

Bosch wipers Partmaster Whangarei

Bosch million dollar distributors: Diesel distributors, Automotive Supplies Ltd, Pan Pacific

Distributor of the Year: Partmaster


NEWS

Stolen vehicles now online A list of all vehicles stolen in New Zealand in the past six months is available at http://www.police.govt.nz/stolen/vehicles

Deputy Commissioner of the New Zealand Police Mike Bush says the new initiative is free, up-to-date and provides a simple, on-the-spot way of checking on a vehicle.

The new database was officially launched at a meeting of the Crime Prevention Partnership Forum (CPPF) in Wellington last year.

“This has been an initiative that‘s been developed in partnership with the CPPF, a group that represents a wide range of businesses that want to help Police to prevent crime,” says Mr Bush.

Many of the businesses involved in CPPF will get great benefits from the database.

“It will be a resource for security guards, insurance companies, motel owners, scrap metal dealers and community policing patrols,” says Mr Bush.

“It also has obvious benefits for people buying second-hand vehicles, garages that service vehicles and service stations where petrol thefts can regularly be associated with stolen vehicles.”

The database allows the search via registration plate number, VIN, engine or chassis number. This is run against all outstanding stolen flagged numbers.

A hit will return the make, vehicle type and colour, and when the vehicle was reported stolen.

The datacovers vehicles that have been stolen during the past six months for all of New Zealand or in a single police district or combination of districts.

now anyone with a smart phone can run the vehicle through the database on the spot, The risk of being caught with a stolen vehicle has just risen considerably.

Potentially, it gives police many more pairs of eyes out there. People can do their own checking and then report it to Police, says Mr Bush.

It‘s an extra deterrent for offenders because REAdER REPly 011218

Online at www.motorequipmentnews.co.nz

Bentley unveils new V8

two new Bentley models….Full story online at www.motorequipmentnews.co.nz

An electrified Beetle

Volkswagen has launched….Full story online at www.motorequipmentnews.co.nz

Detroit debut for SL

mercedes-Benz unVeiled the…..Full story online at www.motorequipmentnews.co.nz

Hexa space for Hyundai

hyundai motor company….Full story online at www.motorequipmentnews.co.nz

NEWS

Toyotas FP new


NEWSTOOLS FEaTUrE

Getting it right the first timeKitting out a workshop with the

best available tools, be it hand tools, electrical tools, diagnostic tools and the like is not an investment to be taken lightly. Motor Equipment News spoke to various suppliers about the latest and greatest innovations in their products and services on offer – including tool hire for those occasions where workshops need a specialist tool for one-off jobs.

Hire a tool from HTCHave you ever needed a

specialised tool to complete a job but couldn’t justify purchasing it or you could not get it in time?

HTC has thousands of tool solutions for hire which it will supply all over NZ. Hire team leader John Hopewell says that customers returning equipment gear are often heard making the comment, “If only I’d know about the hire service earlier I could have saved thousands.”

The HTC hire range includes transmission jacks, torque equipment, low height mag drills, hollow centre hydraulic rams, heavy

REAdER REPly 011220

EQUIPMENT

EQUIPMENT

SPX OTC PC-VCi WIRELESS SCAN TOOL Perform trouble

shooting, check technical data and order your parts required to finish the job all from the motor vehicle

The PC-VCi can also be connected to Navigator to approved customers, talk to your local Store Manager or Sales Representative

Generation Diagnostic Exclusive to REPCO•The PC-VCi communicates wirelessly from the

VCi module plugged into the diagnostic port, to the touchscreen semi-rugged tablet

•No cables to damage or drag around. This purpose designed tablet allows the operator to simply touch a screen button to start the Diagnostic Scan Tool

•The Tool also has the add on feature to wirelessly connect additional units such as the OTC 4/5 Gas Analyser or the OTC Diesel Smoke Meter

•With a Wireless internet connection in the workshop, the operator has all the information required to complete a job without leaving the vehicle

PC-VCI

NEW

Quality & Value you can Trust

Cordless Variable Switch Impact Wrench• 13mm(½”)Dr.VariableSpeed• Noloadspeed• 0-1800rpm• Weight2.9kgRCLIWV

Cordless Adjustable Torque Impact Wrench• 13mm(½”)Dr.6TorqueSettings• Noloadspeed• 1800rpm• Weight2.9kgRCLIWA

NewtoRepco’srangeofimpactgunsandwrenchesaretheimpressive18VCordless Impact Guns. These quality impact guns are presented in their own Blowmould Case with an additional battery, charger and 4 of the most popular

impactsockets.ThelatestinLithium-Ionbatterytechnologyprovidesamaximumtorqueof5,500kg-cm(400ft-lb)withlongcyclelifeandfastchargingof1hour.

NEW

0800 472 787 0800 200 100

2_258464 February MEN advert.indd 1 12/01/12 4:38 PM

TORQUE WRENCHCALIBRATION

0800 48 2000www.specialisedtools.co.nz

SALES • SERVICE • HIRE • CALIBRATION

TORQUE WRENCH CALIBRATION

1.2–1500Nm (0.88–1106lbf.ft)

NationwideOn-site

On-siteNationwide

1.2-1500Nm (0.88-1106lbf.ft)

duty gear pullers and a large range of lifting gear including air bags and low height rams.

All torque tools are all calibrated and include manual wrenches up to 1500Nm through to hydraulically powered units up to 15180Nm. HTC hire also has a range of pneumatic and electric torque and impact guns for speedy assembly, as well as foldable engine cranes, manual and electric chain hoists. For the heavy vehicle trade the transmission jacks – with a customisable top plate – turn a 2-3 man operation into a job done safely by one man. Drilling chassis are easy with low height magnetic based drills and HTC also hire out rotor broach cutters.

If it’s required for lifting, pulling or even a special application, HTC has an extensive range of small and large hydraulic rams to help.

HTC provides a same day delivery service to help keep downtime to a minimum, pick up is also available once the job is done. If customers aren’t located close to one of the HTC branches in Auckland or Christchurch the company will courier tools overnight.

“The speed at which HTC despatches hire equipment is something that often surprises customers,” says John.

“One customer from Rotorua called at 4:30pm because he was in a bit of a jam and needed a hydraulic torque system to break some bolts out – the excavator had to be back in operation the following day.

“We placed a hydraulic torque

system on the courier that night and by 9am the next day he was into the repair.”

John says that next time people are stuck on a job and don’t have the right tool, they should try HTC Hire – 0800 482 000. He says HTC have loads of experience and really enjoy making the hard jobs easy. www.specialisedtools.co.nz .

Easy to use

Equipment

AECS Training Ph: 06 8749 077 Fx: 06 8749 078 E: [email protected] www.aecs.net We provide valuable automotive training throughout the country.

LAUNCH Diagun Scantool

Full kit: $7,550 +gst

$16,300+gst

Automotive scantool. Huge coverage! AECS Ltd is an official LAUNCH Dealer

AECS Ltd is NZ’s Automotive equipment provider. Our staff can teach you how to get the most out of your equipment.

Herbert Leijen

$4,850 +gst

Aircon service: - Recover - Vacuum - Oil injecting - Dye injecting - Precise sys-tem charging Also for mobile applications

Ecotechnics made in Italy From

$5,680 +gst

Testlane: $33,000 +gst Brake testers from: $17,000 +gst

Price reduction!

Make use of the perfect € FX rate!

New shipment

arriving soon!

NEWS

EQUIPMENT

EQUIPMENT

EQUIPMENTEQUIPMENT

SPX OTC PC-VCi WIRELESS SCAN TOOL Perform trouble

shooting, check technical data and order your parts required to finish the job all from the motor vehicle

The PC-VCi can also be connected to Navigator to approved customers, talk to your local Store Manager or Sales Representative

Generation Diagnostic Exclusive to REPCO•The PC-VCi communicates wirelessly from the

VCi module plugged into the diagnostic port, to the touchscreen semi-rugged tablet

•No cables to damage or drag around. This purpose designed tablet allows the operator to simply touch a screen button to start the Diagnostic Scan Tool

•The Tool also has the add on feature to wirelessly connect additional units such as the OTC 4/5 Gas Analyser or the OTC Diesel Smoke Meter

•With a Wireless internet connection in the workshop, the operator has all the information required to complete a job without leaving the vehicle

PC-VCI

NEW

Quality & Value you can Trust

Cordless Variable Switch Impact Wrench• 13mm(½”)Dr.VariableSpeed• Noloadspeed• 0-1800rpm• Weight2.9kgRCLIWV

Cordless Adjustable Torque Impact Wrench• 13mm(½”)Dr.6TorqueSettings• Noloadspeed• 1800rpm• Weight2.9kgRCLIWA

Cordless Adjustable Torque Impact Wrench

Settings

Cordless Variable Switch Impact Wrench

Speed

NewtoRepco’srangeofimpactgunsandwrenchesaretheimpressive18VCordless Impact Guns. These quality impact guns are presented in their own Blowmould Case with an additional battery, charger and 4 of the most popular

impactsockets.ThelatestinLithium-Ionbatterytechnologyprovidesamaximumtorqueof5,500kg-cm(400ft-lb)withlongcyclelifeandfastchargingof1hour.

NEW

0800 472 787 0800 200 100

2_258464 February MEN advert.indd 1 12/01/12 4:38 PM


NEWSHYBrID FEaTUrE

Snap-on releases new rangeSnap-on says that new specifications for its

diagnostic product range make it more customisable and greater value than ever before. Whether you require the comprehensiveness of Verus, the flexibility of Verdict or the robustness of Modis, Snap-on says it has a diagnostic tool to suit the needs of any business and budget price-point.

“Customers can now customise their Snap-on diagnostic platform in a manner of ways – adding single adaptor or kits for OBD I vehicles, a diagnostic cart, docking station or high or low amps clamps. Now your diagnostic tool comes the way you want it and fits how you work,” says Snap-on diagnostics sales and marketing manager Paul Lynch. “Not only are there more tools in the Snap-on range, each of them can be customised to suit the needs of the customer.”

The 2012 range includes Snap-on’s new 11.4

version software, with new features and coverage, in addition to all of the features and coverage from the previous upgrades.

There are more than 92,300 new and enhanced codes, tests, tips and data, plus access to more than 44,445 new systems for 1996 to 2011 model years, including enhanced 2011 model coverage for Holden, Mazda, Lexus, Nissan, Subaru and Toyota, increased coverage for European vehicles plus the addition of new coverage for Smart Car. Additionally, Software Bundle 11.4 offers over 5,700 new component test meter (CTM) tips.

Snap-on Diagnostics says it provides and unrivalled support package – a dedicated team of diagnostic product specialists, technical support help desk, on-line and face-to-face product training, Tech Ed and, of course, its extended warranty.

REAdER REPly 011222


TOOLS FEaTUrE

Speak to your Snap-on Franchisee for more information

0800 810 581 www.snapontools.com.au**CONDITIONS APPLY. FIGURES QUOTED MAY VARY ACCORDING TO CONTRACT TERMS. TRADE CARD APPLICATIONS ARE SUBJECT TO APPROVAL, ONGOING PURCHASES ARE SUBJECT TO YOUR AVAILABLE/APPROVED CREDIT LIMIT.

GET THE VERDICT ON TRADE CARD FROM ONLY **$77 (inc.) PER

WEEK

THE VERDICTTM

IS INAND IT'S OUR MOST FLEXIBLE TOOL EVER

VERDICT puts everything in your hands from anywhere in the shop: codes, live data, component tests, Troubleshooter, web resources and real-world answers.

The VERDICT diagnostic and information system includes a wireless display, scanner and meter to let technicians be in more places at once.

GET THE VERDICT

FROM ONLY $12,207

inc. GST [NZD]

ALL FROM

HERE

SOT_MEN_02-12_Verdict.indd 1 16-Jan-12 2:47:05 PM

New products from Sulco Super wide roll cabinet sets the standard New 306 piece tool kit

T&E have recently added a new set to its range of tool kits. Part number 9889 comprises 306 pieces of selected most-used socket wrenches, ratchets and accessories plus a range of hand wrenches and spanners plus pliers and other service tools, all housed in an extra large, 10-drawer tool chest, with all ball bearing slides.

All the sockets and drive accessories are stored in formed pockets in the top layer of the chest for easy access. It’s simple to

ensure that all the small items are safely placed back where

they belong. There is also space in the chest for additional tools to be added later. If an item is misplaced or lost all

components in sets are also available individually.

Summit heavy vehicle jacksSulco says the new range of its mid-

priced Summit heavy vehicle jacks are made in an advanced manufacturing facility in China featuring computerised machining equipment.Sulco says the new range will meet the

needs of workshops seeking top quality air hydraulic jacks at affordable prices. Four jacks with capacity from 15 to 60 tonnes are currently on offer from a wide range of models available ex-factory. Sulco says the advanced manufacturing

technique ensures that all components are machined to exact tolerance which is critical when manufacturing jacks of this type.Sulco recommends that workshops which

service trucks, buses and tractors should check out the advantages of these new

Summit jacks before making a purchasing decision.

T&E Tools Australia have introduced a new range of tool chests and roll cabinets purpose-built for the Australasian market. All the boxes and cabinets in the new range feature extra heavy duty ball bearing drawer slides, with heavy drawer pulls giving the drawers greater rigidity. The slides are of heavy construction with doubled up slides on the extra deep drawers. Heavy gauge steel construction with extra welds and super duty large diameter polymide casters on the roll cabs ensure top quality, says Sulco Tools and Equipment. The boxes are finished with bright red powder-coated enamel with UV stabilisers protecting them from paint fade.

The largest offering in the range is the all-new monster 1800mm (72 inch) wide 21 drawer super roll cabinet on offer at a very competitive price point, according to Sulco. This cab has 21 drawers and six heavy-duty braked casters. The dimensions are 1830mm wide x 1180mm high x 660mm deep. A 40mm thick laminated wooden butcher block top is fitted to the top of this cabinet. At $2700.00 plus GST Sulco Tools says this cabinet is great buying.

formed pockets in the top layer of the chest for easy access. It’s simple to

are safely placed back where they belong. There is also space in the chest for additional tools to be added later. If an item is misplaced or lost all

components in sets are also available individually.

Summit heavy vehicle jacksSulco says the new range of its mid-

priced Summit heavy vehicle jacks are made in an advanced manufacturing facility in China featuring computerised machining equipment.Sulco says the new range will meet the

needs of workshops seeking top quality air hydraulic jacks at affordable prices. Four jacks with capacity from 15 to 60 tonnes are currently on offer from a wide range of models available ex-factory. Sulco says the advanced manufacturing

technique ensures that all components are machined to exact tolerance which is critical when manufacturing jacks of this type.Sulco recommends that workshops which

service trucks, buses and tractors should check out the advantages of these new

Summit jacks before making a purchasing decision.

T&E Tools Australia have introduced a new range of tool chests and roll cabinets purpose-built for the Australasian market. All the boxes and cabinets in the new range feature extra heavy duty ball bearing drawer slides, with heavy drawer pulls giving the drawers greater rigidity. The slides are of heavy construction with doubled up slides on the extra deep drawers. Heavy gauge steel construction with extra welds and super duty large diameter polymide casters on the roll cabs ensure top quality, says Sulco Tools and Equipment. The boxes are finished with bright red powder-coated enamel with UV stabilisers protecting them from paint fade.

The largest offering in the range is the all-new monster 1800mm (72 inch) wide 21 drawer super roll cabinet on offer at a very competitive price point, according to Sulco. This cab has 21 drawers and six heavy-duty braked casters. The dimensions are 1830mm wide x 1180mm high x 660mm deep. A 40mm thick laminated wooden butcher block

top of this cabinet. At $2700.00 plus GST Sulco Tools says this

buying.

The best vice option. A new range of European-made fully

forged steel vices is now available for the first time in NZ.

Sulco says that Fortissimo forged steel vices offer far greater strength and rigidity than traditional cast iron or cast semi-steel vices and will give a much longer service life.

Initial shipments will arrive in February 2012. Sulco believes its customers want better quality because buying solely on price can be costly in the longer term.

The new vice range includes the Fortissimo model in sizes 125mm, 150mm and 200mm jaw widths. Being fully forged C45 grade steel with induction hardened jaws and anvil, Sulco says the manufacturer claims it has never had a broken vice and more than 80 percent of its production goes to Germany which it says has the highest standard for vices in the world.

Fortissimo vices have cross milled steel jaw grips. They are available with clip on forged steel pipe holding jaws as an option for tradespeople working with pipes. The vice slide can be adjusted for lateral movement by adjustment screws in the vice body. They are of compact and streamlined design compared to big heavy cast iron vices.

For price sensitive buyers, the fully forged C45 steel Kanex range of models in jaw widths 125mm and 150mm will deliver very rugged long-life vices at a lesser price than the Fortissimo.

Fortissimo Vices are available by calling Sulco Tools on 0800 800 488 or selected tool stockists nationwide.

NEWS

Speak to your Snap-on Franchisee for more information

0800 810 581 www.snapontools.com.au**CONDITIONS APPLY. FIGURES QUOTED MAY VARY ACCORDING TO CONTRACT TERMS. TRADE CARD APPLICATIONS ARE SUBJECT TO APPROVAL, ONGOING PURCHASES ARE SUBJECT TO YOUR AVAILABLE/APPROVED CREDIT LIMIT.

GET THE VERDICT ON TRADE CARD FROM ONLY **$77 (inc.) PER

WEEKFROM ONLY **$77

THE VERDICTTM

IS INAND IT'S OUR MOST FLEXIBLE TOOL EVER

VERDICT puts everything in your hands from anywhere in the shop: codes, live data, component tests, Troubleshooter, web resources and real-world answers.

The VERDICT diagnostic and information system includes a wireless display, scanner and meter to let technicians be in more places at once.

GET THE VERDICT

FROM ONLY $12,207

inc. GST [NZD]

WORK FROM

HERE

WORK FROM

HERE

ALL FROM

HERE

SOT_MEN_02-12_Verdict.indd 1 16-Jan-12 2:47:05 PM


ParTS NEWSTOOLS FEaTUrE

REAdER REPly 011224

Scan tools from Sulco

Sulco Tools and Equipment carries a large range of automotive and heavy commercial vehicle scan tools to ensure that its customers get the right product for their workshops. Sulco says it also provides technical support from factory trained specialists across all of its brands.

Sulco has been importing and selling automotive aftermarket scan tools since the early 1990s and offers New Zealand workshops a broad range of equipment to suit any budget and any type of vehicle, from OBII readers to fully programmable professional units.

The Sulco range of scan tool brands now includes, JBT, Carman/Nextech, Autoboss from SPX, Opus from Sweden, Autologic from the UK

and in a new development it has the complete range of Hanatech scan tools, scopes and accessories.

The JBT scanner is a budget scan tool priced below $4,000 that Sulco says is excellent piece of entry level equipment for a workshop which has good coverage of most vehicles found in New Zealand. Most of its software development was done locally.

Carman/Nextech has been at the forefront of diagnostic tool development for many years according to Sulco. Carman/Nextech

provide diagnostic solutions to the Japanese and Korean OEM as well as developing

its range of aftermarket hand held tools which provides data on a wide selection of European, US, and Australian brands as well as the Korean and Japanese vehicles.

Nextech staff has also spent time in New Zealand to further develop the software of their scanners to cater for the huge diversity of Japanese cars found here according to Sulco and it also understands that Carman/Nextech is Australasia’s largest selling scan tool brand.

The Carman Scan Lite is an entry-level portable hand-held compact scanner

which is robust enough to survive the New Zealand workshop environment according to

Sulco. It has menu driven software which is easily navigated.

Sulco says the user-friendly Carman AT with colour touch screen technology has been its best selling scan tool for the last 12 months while it says the Carman VCI has been its best selling PC-based scan tool that offers additional vehicle repair data..

The Autoboss V30 from SPX has very good coverage of European and Asian vehicles

according to Sulco while it says the

user-friendly Swedish Opus CMT Pro is a PC-based wireless scanner

that has great coverage of the

latest European models.

Sulco says the Opus CMT Pro is

particularly easy to use with Audi and

Volkswagen passenger and commercial vehicles. For European car repair

specialists Sulco says the English Autologic scan tool is

the most capable on the New Zealand market, offering the

functionality of a franchise dealer tool with coverage of all vehicle systems.

Sulco says that Autologic aims to match or exceed OEM functionality with factory trained technical support and practical training allowing workshops to compete with franchises for specialist work.

“We firmly believe you won’t find a more capable aftermarket scan tool than the Autologic anywhere in the world, and yes that is a bold claim,” says Sulco general manager Brett Higgins.

As well as distributing the complete range of new Hanatech equipment, Sulco is now also ably equipped to offer current Hanatech/OTC owners full service and support for their old tools as well as the option to upgrade to new tools and accessories.

For more information please contact Sulco scan tool specialist Ed Baard on 027 4359898.


NEWSTOOLS FEaTUrE

Specialists in transport tools and parts

JTC automotive tools live up to the expectations of demanding engineers, with tight tolerances achieved through quality assembly and engineering that makes work more productive, according to its sole NZ distributor Transport Tools and Parts.

The company says these tools comply with the European DIN 3113, GS Standards, as well as the ISO 9001 and ISO 9002 international standards. The JTC range of products have

met the demands and requirements of the Asian,

European and American automotive service and repair market since 1981.

Transport Tools and Parts director Bruce Milne says that he

personally has more than 45 years experience

as a mechanic and he started the automotive tool trade and wholesale business more than 12 years ago. The company now has

four vans on the road to service clients around Canterbury and the West Coast. Based in Christchurch, Transport Tools and Parts is a member of the Motor Trade Association. It is a friendly family-owned company that has more than 40 years experience understanding the requirements

and demands of the automotive industry.

“We supply a lot of

specialist tools to

the

automotive industry including camshaft timing, air conditioning, and tools for panel beating.

“There is considerable demand for the hard to find one-off items and we endeavor to find the one-off tools that other supplier might have difficulty sourcing,” he says, This aspect is becoming a large part of their business. Transport Tools and Parts also carry Tota Clamp tools for body shops as well as dedicated JTC auto tools for the Audi, BMW, Mercedes-Benz and Volkswagen brands.

Wrenches and sockets carry a lifetime warranty of the tool; these are made from CR-V steel, and are heat treated to provide high-level strength and uniform hardness.

Bruce says that pneumatic, electrical and hydraulic equipment is available from Transport Tools and Parts as well as general tools and wrenches. Transport Tools and Parts also import Hans Tools, which helps meet the demand for AF sizes, which are getting harder to obtain in New Zealand.

requirements of the Asian,

and demands of the automotive industry.

“We supply a lot of

specialist tools to

the

of demanding engineers, with tight tolerances achieved through quality assembly and

Transport Tools and Parts director Bruce Milne says that he

personally has more than 45 years experience

as a mechanic and he started the automotive tool trade and wholesale business more than 12

phone: 0800 867 885 e: [email protected]

call us to find your local supplier

Workshop Tools

REAdER REPly 011225


NEWSTOOLS FEaTUrE

Ting 1/2 page new

New products from TengToolsTengTools started more than

twenty-six years ago with the belief that quality lives in

the details. Over the years these useful details have

come to be known as “typically Teng”.

Today TengTools says it offers more than 2500 tools to the professional user and DIY enthusiast and its products are sold in more than 30 countries around the world.

TengTools says that professional

users in industry and automotive workshops all over the world have discovered the advantages of Teng.The company

says it offers Swedish design and dependability of

Taiwanese production at prices competitive

enough to please price conscious professional users. TengTools says it is not just another company selling hand tools, because Teng’s guaranteed quality tools feature a uniquely patented tool control system, helping users

to get organised! The system will help improve workflow by creating a more organised and efficient workshop with smoother performance. Teng Tools says workshops will save money and time by eliminating the hassle of

searching for misplaced tools. All tools bearing the name

TengTools are designed and manufactured to meet or exceed ISO, DIN and other international standards says the company. The TengTools “everlasting power guarantee” gives the added assurance that any TengTools product will be exchanged or repaired should it fail under normal working conditions due to faulty workmanship or material. Check out the TengTools website, www.tengtools.co.nz for more information.

TengTools started more than twenty-six years ago with the

belief that quality lives in the details. Over the years these useful details have

come to be known as “typically Teng”.

Today TengTools says it offers more than 2500 tools to the professional user and DIY enthusiast and its products are sold in more than 30 countries around the world.

TengTools says that professional

users in industry and automotive workshops all over

says it offers

efficient workshop with smoother

time by eliminating the hassle of

REAdER REPly 011226


NEWS NEWSTOOLS FEaTUrE

Modern diagnostics from AECS

Launch Staff pairing the X431 Diagun wireless connector with the

hand held PDA.

REAdER REPly 011227

For more than 11 years AECS has been supplying NZ (and Australian) workshops with automotive test equipment, training and technical support for the past 11 years.

One of the core product lines supplied by AECS is the Launch scan tool range.

“We have chosen the Launch scanners as most other scan tools can only do some sections on some cars,” says AECS director Herbert Leijen.

“Many equipment suppliers state that you always need a number of different tools to cover all the vehicles you work on, as not one scan tool is complete,” he says.

“With our diagnostic background we dispute that and we believe that the Launch does cover all the cars technicians would work on with maybe one or two exceptions.

“We have recently been to the Launch factory in China and have seen its vast industrial complex made up of factories and research centres. In our view is this unparalleled anywhere in the world, not one of the equipment manufacturers we have previously visited is as large as this one,” he says.

“When we were at the factory we found out that Launch not only makes its own tools on the production line but also builds instrument clusters for a European car brand. Launch does various projects like this from time to time to maximise return on its specialist automated production lines,” says Herbert.

Size of resourcesHerbert says the size of the Launch Company

makes its scan tools really affordable.“The company would not have been this large

if they did not sell huge numbers of their tools worldwide and if the tool was not the best on the market,” he says.

“To maintain market share they need to reinvest in the tools but due to the company’s size they have more than sufficient resource and the advances I have seen in the past few years are phenomenal.

“AECS keep up with new developments to make sure that the customer is kept provided with this new technology and kept informed of how to use the equipment efficiently.”

AECS appoints more staff“The demand for training and equipment has

increased dramatically in the last few years, and this has put a lot of pressure on AECS,” says Herbert.

“Late last year we decided to employ two highly skilled people. One will assist us in the technical support and development of new technique. Paul has worked for the past seven years in the UK for the Williams F1 team as a sensor technician. I am sure that AECS customers will meet him now and then.

“Paul adds strength to the role that Peter has within AECS. A university graduate with a BE Hons in electronics, Peter is involved with the numerous R&D projects we have underway at present.”

New training moduleHerbert says that one of Peter's roles has been the

development of a new training seminar.“The launch of this seminar is for the YES

association in February, and it will be rolled out later in the year throughout the country,” says Herbert.

“The training seminar deals with some technical problems we recently encountered on late model vehicles. It explains how to easily spot these problems through the information displayed by the equipment,” he says.

“One example is how a drive by wire vehicle throttle control motor response slows down due to noise induced on its position sensor. The problem lay in the capacitance of the earth cable, but how do you find? It is simple, once you know what to look for,” says Herbert.

Toledo tools & Tridon Clamps:Toledo with over 60 years of experience is committed to excellence by design and value for money. Toledo continually strives to provide its customers with the most comprehensive range of quality hand tools at an affordable price. In 2011 we introduced over 100 new products to the extensive range.

301934 Toledo professional bits set 37 pieces■ Bits are made from hardened and tempered alloy steel■ Professional quality set supplied in a handy metal tool box – length 240mm

304041 Toledo Pulley puller spanner set■ Ideal for holding, removing and tightening damper, crank, power steering pump, alternator, radiator fans, and difficult access pulleys.■ Drop forged chrome vanadium steel■ Hard wearing matt coated grip prevents possible slippage■ Sizes 13, 15, 16, 17 and 19mm■ Total length 470mm www.tridon.co.nz

Tridon is the leading quality accredited hose clamp manufacturer in the Southern Hemisphere. The clamps are manufactured in a full range of solid and perforated band worm drive hose clamps and heavy duty T-bolt hose clamps. Tridon can also design and produce purpose built clamps to meet unique fastening or sealing requirements. All products are manufactured to either SAE or BS requirements and are accepted by all motor vehicle and Industrial OEM’s. Tridon’s manufacturing and distribution facilities are TS16949 / ISO9001 quality accredited and ISO14001 environmentally accredited.

Launch Master X431 post production continuous testing rig

Launch Wheel alignment equipment R&D and calibration department


NEWS

Business as usual? Motor Equipment News talks to

the dismantling trade about the

effect of the Japanese tsunami

and earthquake as well as the

emissions regulations on the supply

and demand for new and recycled

automotive parts.

Dodson Autospares director Harry Dodson says that personally he hasn’t noticed a negative effect from the Japanese situation in regard to his main supplier of parts, and that prices have remained relatively stable.

“Our primary supplier has complained to us that he has not been getting the amount of stock he would like, but he has continued to ship the same amount of containers to us as before the earthquake and tsunami,” says Harry.

“It’s the second-tier supply that has been very scarce – because they have been unable to source product for us.”

Steve Trevett from Toyotaz Galore says he has found getting containers of parts out of Japan post-earthquake and tsunami has been a slower process.

“The supply chain has certainly been affected and sourcing parts for both early and late-model product has become more difficult and more expensive,” he says.

“We import as much ex-Japan stock as we are able to, but we also dismantle NZ new vehicles to cater for the local supply and demand,” says Steve.

“There has been a noticeable increase in price for stock out of Japan but the price of locally-sourced items has been relatively stable,” He says.

Harry says he has been cautious about purchasing damaged whole vehicles from Japan particularly with regard to vehicles that may have water damage and contamination.

“I put procedures in place to guard against possible contamination, and sent Geiger counter equipment to our main supplier in Japan with a request for new stock inspection procedures to be followed before containers were packed and shipped,” he says.

Despite the downturn in insurance claims last year as people used their cars less or heeded the safety messages about driving more carefully, Harry says it’s still a competitive market for parts and panels in New Zealand as well as

replacement engines.“People are still replacing engines

and there was a small increase in the number we sold towards the end of 2011,” he says.

“I think the automotive servicing market is a reflection of the economy, with people deferring maintenance and skipping services.”

Steve Trevett says that even through the Rugby World Cup in 2011 business for Toyotaz Galore remained consistent as people still needed parts for their vehicles.

“Our aftermarket parts and our local parts sold consistently, we didn’t notice a great deal of change across the market,” he says.

However, Harry Dodson says that he sees the introduction of tighter new emission rules governing the importation of second hand vehicles as being a positive one for the dismantling industry.

“There will be people out there who will not be able to afford the more expensive cars on offer-there are people out there who can’t afford to invest $15,000 in a newer second hand car and they will repair the old one to keep it going.”

Steve Trevett agrees. “Unlike the insurance companies who want genuine parts for panel repairs, and rightly so, we find motorists who are paying for their own repairs and maintenance still want the cheapest possible option be it aftermarket or second hand.”

REAdER REPly 011228

NEWS

ROUND 5 WHANGAREIMARCH 9 & 10 2012

ROUND 4 MT SMARTFEBRUARY 10 & 11 2012

0800 480 095

GIVE US A RING 0800 480 095

Proud sponsors of

Round 3 TaupodecembeR 16 & 17 2011

GIVE US A RING 0800 480 095

Proud sponsors of

Round 3 TaupodecembeR 16 & 17 2011


NEWS

Formula SAE-A hat trick for Monash UniversityThe Monash University Motorsport

Team stamped its authority on the Formula SAE-Australasia competition by scoring its third successive outright victory in the competition.

Famous for its winged Formula SAE-A car designs developed in the Monash University wind tunnel, the 2011 Monash University Motorsport team performed consistently across the nine scoring events to take the win with 829.3 points to beat University of Western Australia with a total score of 754.1 and Edith Cowan University on 739.5 points.

experience is unique because students work in a team environment facing deadline challenges, while optimising their design, just like it happens in industry. He said Australia needs the best talent in its automotive sector, which is a cornerstone for many other key industries.

Now in its 11th year, this engineering education experience in a race car is part of a prestigious international series of Formula SAE competitions held throughout Asia, Europe and the USA. Competing teams of engineering students design, build, test and compete in small race cars designed to a specific formula and a $50,000 budget limit.

The 2011 winnersDesign Patron for Formula SAE-A is

former Brabham and RALT race car designer Ron Tauranac and Senior Design Judge is Hyundai Technical Trainer Pat Clarke. Ron Tauranac said the competition is a huge learning opportunity for the students.

Organised by the Society of Automotive Engineers - Australasia (SAE-A), the international competition is run over the academic year and the scoring events were held at the Victoria University Werribee campus training track near Melbourne from 15 to 18 December.

The Formula SAE-A host company for 2011 was GM Holden and engineering director Greg Tyus welcomed 23 teams from universities in all mainland Australian states and from India, Japan, and New Zealand. He said the Formula SAE-A education

Edith Cowan University delivered a surprise to its 22 competitors with a strong third place outright

performance.

Pictured at the launch of the 2011 Formula SAE-Australasia competition were (left to right) Wyndham

City Council Deputy Major Cr Glenn Goodfellow, GM Holden Executive Director Engineering Greg Tyus,

General Manager Motorsport, Australian Grand Prix Corporation Craig Fletcher, and SAE-A President Bill

Malkoutzis. The welcome ceremony for 23 universities from Australia, Asia and Europe featured a hot laps

demonstration by Swinburne University driver Matt Dwyer in the team’s 2010 second place winning car.

Outright winner of the Formula SAE-Australasia university engineering competition for the third successive

year was Monash University Motorsport.

Formula SAE-A Senior Design Judge Pat Clarke and Design Patron Ron Tauranac The University of Western Australia team bounced back to second place outright after a loss of form in

2010.

Ron Tauranac said that in addition to the design and construction process, the teams have a chance to learn from each other and the judges when they come together at the end of the year. “In the judging, we prefer to educate them, and after the judging we try to revisit teams for mini workshops,” he said.

Monash University Motorsport defended their 2009 and 2010 Formula SAE-A titles with a lighter car with a more fuel efficient engine. The team won first places in the Cost, Skid Pad, and Endurance events, second place in the Autocross and high scores in the Design, Endurance and Economy categories.

In addition to the outright Formula SAE-A prize, they were awarded the prestigious FISITA (International Federation of Automotive Engineering) Engineering Excellence Award. Monash University achieved all this after facing an “all-nighter” on the Friday to remedy engine problems.

REAdER REPly 011230


MagazINE FOr THE Nz HEavY DIESEL INDUSTrYNews

NEWS

Hino unveils new technology

Hino Motors Limited unveiled a cutting-edge zero-emission electric delivery van concept as part of the company's presentation at the recent Tokyo Motor Show.

The eZ-CARGO light duty EV (electric vehicle) van concept points toward the future of urban cargo transport – with a lightweight compact body, exceptionally large cargo space and zero-emission drivetrain.

Hino used the 42nd annual Tokyo show as a platform to showcase the company's latest hybrid, plug-in hybrid and EV (electric vehicle) technologies that will be used in production trucks and buses from 2012.

Hino Australia divisional manager Alex Stewart says Hino used the show to display the depth and spread of Hino technologies in markets around the world.

"Hino Motors works extremely hard to identify

exactly which technologies are suited to individual markets around the globe," he says.

"Hino's stand at this year's Tokyo show is of significant importance for new and existing customers as it showcases a number of potential hybrid and electric propulsion technologies we are likely to see in the future.

"We're looking forward to sharing new hybrid and electric truck and bus technology with customers in the near future, along with Hino's considerable engineering expertise in this field," he said.

New Hino vehicles on display at the show include the Hino Dutro (300 Series) hybrid, 300 Series plug-in hybrid, S'ELEGA hybrid premium bus and the eZ-CARGO concept.

The eZ-CARGO concept is a unique EV vehicle, designed primarily for use in congested urban areas.

It features a large, flat cargo area with a lightweight

and compact exterior body, and is highly suited to short-distance high-volume cargo transport.

The all-new Dutro (300 Series) plug-in hybrid is a direct development of the Australian market's Hybrid 300 Series.

It features an advanced battery pack charged from an external power source to provide extended electric-only running that further reduces fuel consumption and greenhouse gas emissions.

The S'ELEGA hybrid bus is the only mass-produced hybrid touring bus from a Japanese manufacturer, and will be displayed with a luxury-specification interior for show attendees.

Hino also displayed a series of global heavy duty trucks, and a 500 Series truck that competed in the recent Dakar Rally.

REAdER REPly 011231

DIESEL INDUSTrY NEWS


ContiTech unveils new air spring catalogueThe new ContiTech 2011/2012

product catalogue contains the complete range of ContiTech air spring systems for the heavy commercial vehicle replacement market segment.

For the first time, the catalogue also contains the entire range of screw kits. For air springs that come complete with mounting kits, workshops can also order any screws, nuts, split pins and washers they require at the same time. Furthermore, mounting instructions are enclosed which give detailed information on what to look out for when

mounting an air spring. Besides key instructions, regarding tightening torque values for example, symbol diagrams also help to guide mechanics.

As usual, all references are listed according to their application and any new references are marked – also on the respective data sheets. Workshops can order the updated catalog by sending an e-mail to [email protected] or view it online at www.airspringcatalogue.com.

Measuring 25 years of progressIn 2012, Volvo Trucks will begin

production of its most powerful truck yet – the 550kW (750hp) Volvo FH16. The year marks exactly 25 years since Volvo first launched its 16-litre engine back in 1987, so to find out what has really changed in that time, British freelance truck journalist Brian Weatherley put

the original Volvo 345kW (470hp) F16 head-to-head with the new Volvo FH16-750 in a heritage haulage challenge.

Both trucks were driven a distance of 2,200 metres on a seven percent gradient, up one of Sweden’s toughest ascents – known as the Gothenburg hill located just outside Jönköping.

For Brian, driving the Volvo F16-470 again after so many years brought back a great many memories and served as a reminder of how advanced the original 16-litre was when it was first released. However, the relative ease with which the Volvo FH16-750 powered up the Gothenburg hill really hit home and

showed just how much progress has been made since then.

Brian Weatherley is the former editor-in-chief of ‘Commercial Motor’ and ‘Truck & Driver’, as well as the founder of the Biglorryblog. He is currently a UK International Truck of the Year jury member.

REAdER REPly 011232


•Gilmour Diesel Ltd Invercargill 03 215 6174 •Alltech Diesel & Turbocharger Ltd Auckland 09 443 6511 •JE Paisley & Co Ltd Oamaru 03 434 8967 •ADS Fuel Specialists Ltd Auckland 09 262 2940 •Diesel Services Ltd Christchurch 03 348 8825•Entech Ltd Nelson 03 543 9409

•Diesel Specialists Ltd Wellington 04 939 6616•Raglan Diesel Injection Ltd Raglan 07 825 5100 •Diesel Services Ltd Auckland 09 525 0830 •Ireland Motors Ltd Gisborne 06 868 8034 •Powertech Ltd Whangarei 09 438 2587 •Diesel Service Centre Papakura Ltd Auckland 09 298 0021 •Turbo & Diesel Specialists Ltd Hamilton 07 847 3339 •Diesel & Turbo Ltd Wellington 04 568 9218 •John R Milburn Ltd Dunedin 03 455 0510

•Simms Diesel & Turbocharger Services Ltd Auckland 09 579 1159 •Autokraft Ltd Palmerston North 06 359 0100 •Diesel Injection Services Ltd Timaru 03 684 3565 •Rotorua Diesel Services Ltd Rotorua 07 348 3158 •Diesel Pumps Ltd Christchurch 03 348 1132

•Marine & General Engineering Ltd Nelson 03 548 9138 •Ashburton Diesel Injection Service Ltd Ashburton 03 307 5801 •Turbochargers NZ Ltd Nelson 03 545 8506 •DSL Automotive Ltd Napier 06 843 5287

Need a Diesel Fuel injection and Turbocharger specialist?

Introducing the AADS, the largest and only network of diesel & turbo specialists across New Zealand.

The Association of Australasian Diesel Specialists (AADS) is a group of dedicated business owners, passionate about the Diesel industry.

Every member is a SPECIALIST in repairing Diesel Fuel injection systems and Turbochargers.

Common Rail Pumps, Inline Pumps, Rotary pumps, Electronic pumps, Common Rail Injectors, EUI injectors, traditional injectors & turbochargers, they all require specialist expertise, skills and high tech test equipment to repair.

Only a dedicated Diesel Specialist has what it takes and can provide the quality service necessary for today’s Diesel Fuel injection systems.

So when you have a Diesel problem give your local AADS member a call...

repairing Diesel Fuel injection systems and

to repair.

DIESEL INDUSTrY NEWS


Crane choice a critical factor

Oceania LED Ltd says picking the right crane was critical in building a new fleet of truck-mounted ‘big screens’ to entertain Rugby World Cup fans.

Oceania LED Ltd built two truck-screen units worth around million dollars each to service the RWC and a growing number of events around New Zealand. Each 8.4m x 4.8m LED screen is stored in three sections inside the truck, then erected and dismantled using a Unic URW504 crane mounted behind the cab, supplied by Crane Sales New Zealand.

“We looked at a range of new and second-hand crane options but we were advised that second-hand cranes would make it hard to achieve certification,” says Oceania director Bob Wilson. “We looked at a number of cranes, but in the end, the Unic was the only crane that ticked all the boxes.”

Oceania needed a cable crane to lift the fragile LED screens straight up and down to erect and pull down. The crew uses a handheld remote control unit to manoeuvre the 800kg screen panels. “Remote control is a key to the operation. We can move the screen sections a millimetre or two at a time with the trigger-based remote. It also minimises the risks of damaging the screens,” says Bob Wilson.

Building the trucks to carry the big screens, plus a crane to comply with New Zealand transport regulations, was a challenge. It meant there was a very small footprint for the crane, and the crane needed to be raised 250mm higher than the chassis

to clear the truck body. Oceania overcame the challenges and now has two mobile truck screens that are totally self-sufficient. Each can travel with its own generator and PA system.

“The Unic crane can pick up or put down an 800kg screen panel or an 800kg generator up to 10.8m away, so that means the truck crane is all we need to set up a screen either on the truck or on another structure.

“Before we put these truck units on the road,

mobile screens often needed third-party cranes to erect and dismantle them. That can be a big cost and it takes time. Our trucks can be in Wellington for an event one day, pull the screen down in an hour, and then drive off to the other end of the country to set up again the next day.”

After the RWC concluded, the trucks had a busy summer travelling to concert and winery tours and other big events.

REAdER REPly 011233


Excellence in refinishing

Drew Avery (Image courtesy of WorldSkills International)

The WorldSkills 2011 competition wrapped up in London with Drew Avery proving his technical skills in vehicle refinishing by winning a Medallion of Excellence.

More than 931 competitors from around the world took part in October’s event competing in 46 skill areas. The New Zealand team won seven Medallions of Excellence.

“The competition has been one of the most beneficial experiences of my life,” says Drew.

“I learned new skills and tested new technology, such as using water-borne products which will go a long way to furthering my skills in refinishing.”

Drew says he’s always had an interest in cars and motorbikes. After finishing school he completed a ‘taster’ automotive course and he was hooked. He enrolled in a pre-apprenticeship course and was offered a job at Stokes Valley Collision Repair Centre in the Hutt Valley.

Once he completed his course through correspondence Drew then

signed up with the NZ Motor Industry Training Organisation (MITO) to do an apprenticeship in collision repair and achieve a National Certificate in Motor Industry (Automotive Body).

For more than four years Drew has been working for Stokes Valley Collision Repair Centre and he says he loves the diversity of the job and takes pride in delivering a good service for his customers.

“I take a dent in the car, repair it, get the colour match, and then paint the repair. It’s a simple enough process, but you have to be spot on,” says Drew.

In 2009 he won the State Refinishing Apprentice of the Year Award, winning a place with the State smash repair team in the Hamilton ITM400. He was also named the inaugural Apprentice of the Year in the Hutt Valley Business Excellence Awards.

“This job has done so much for me,” says Drew, “I have had the opportunity to travel and compete throughout New Zealand and

overseas. What started as a job has now become my career and one day I hope to operate my own business.”

The WorldSkills 2011 New Zealand team also included Andre Prinsloo who

competed strongly in the autobody repair category and Curtis Hartley who represented the team in automobile technology.

For a fine silver finish

For the painting of rims and add-on parts, Spies Hecker says its Permahyd Silver Star base coat for fine metallic finishes is an ideal solution.

Thanks to its extra-fine effect pigments, Spies Hecker says that Permahyd Silver Star base coat is perfect for the painting of rims and add-on parts such as mirror housings. “Such vehicle parts are usually coated in extremely fine shades of silver. With Silver Star base coat, Spies Hecker now has an excellent material for paintwork repairs and original finishes,” says Spies Hecker technical manager Frank Barduna.

“The new Silver Star is our response to bodyshop demand for a bright and fine shade of silver,” he says. “The microscopic metal pigments yield a smooth, aluminium-like gloss.

Refinishers achieve the brightest effects if they spray a film of clear coat straight onto the surfacer before base coat application and then lightly sand the surface to prevent the effect from being marred by variations in substrate texture.” The VOC-compliant base coat can be recoated with any Permasolid clear coat applied in 1.5 coats.

Become more profitable, productive and competitive. Upskill with MITO technical and business programmes

for the motor industry.

Become more profitable, productive and competitive.Upskill with MITO technical and business programmes

for the motor industry.

www.mito.org.nz 0800 88 21 21


REAdER REPly 011234


Ultra-high tensile first for MazdaMazda Motor Corporation has become the first car manufacturer to

successfully develop vehicle components using 1,800 MPa ultra-high tensile steel.

The super strength steel will debut in the all-new Mazda CX-5 crossover SUV set to launch in New Zealand in early 2012.

Mazda’s new production technology uses 1,800 MPa ultra-high tensile steel to fabricate bumper beams, which fit inside the front and rear bumpers and mitigate damage in the event of a collision.

The bumper bars are 20 percent stronger and 4.8 kilograms lighter than previous versions and are a key part of Mazda’s next-generation, lightweight and highly rigid vehicle architecture.

The new body architecture was developed as part of Mazda’s Skyactiv Technology programme and incorporates a new energy absorbing structure as well as an expanded use of high tensile steel to reduce weight.

Mazda CX-5 SKYACTIV-BodyThe use of high tensile steel enables vehicle parts to be

thinner yet still retain the same degree of strength. This leads to significant savings in vehicle weight.

Reducing the weight of bumper beams is particularly important because, as they are incorporated into the body structure at the farthest point from the vehicle’s centre of gravity, their weight has a considerable effect on dynamic performance and responsiveness.

They must also be strong to provide sufficient collision protection. For these reasons, a method of mass producing the parts using stronger steel has been highly sought after.

However, stronger materials are less pliant and therefore absorb less energy in a collision. To overcome this, Mazda conducted extensive research into how bumper beams deform in a crash, and created a new design that absorbs energy more efficiently.

Mazda is committed to reducing vehicle weight and improving dynamic performance while also maintaining a high level of body rigidity and excellent crashworthiness, in order to provide all its customers with driving pleasure and outstanding environmental and safety performance.

Mazda Motor Corporation has become the first car manufacturer to successfully develop vehicle components using 1,800 MPa ultra-high

The super strength steel will debut in the all-new Mazda CX-5 crossover

Mazda’s new production technology uses 1,800 MPa ultra-high tensile steel to fabricate bumper beams, which fit inside the front and rear bumpers and mitigate damage in the event of a collision.

The bumper bars are 20 percent stronger and 4.8 kilograms lighter than previous versions and are a key part of Mazda’s

The use of high tensile steel enables vehicle parts to be thinner yet still retain the same degree of strength. This leads to

Reducing the weight of bumper beams is particularly important because, as they are incorporated into the body structure at the farthest point from the vehicle’s centre of gravity, their weight has a considerable point from the vehicle’s centre of gravity, their weight has a considerable

They must also be strong to provide sufficient collision protection. For these reasons, a method of mass producing the parts using stronger steel

However, stronger materials are less pliant and therefore absorb less energy in a collision. To overcome this, Mazda

deform in a crash, and created a new design that absorbs

thinner yet still retain the same degree of strength. This leads to

Reducing the weight of bumper beams is particularly important because, as they are incorporated into the body structure at the farthest point from the vehicle’s centre of gravity, their weight has a considerable

Emotions and dynamics of colourDuPont develops an annual colour trend show

to share with the world’s leading automotive manufacturers as they seek to develop colour palettes for future vehicles. This year’s trend show, Sense of Colour, showcases the emotions and dynamics of colour. The senses play an important role in understanding if a colour is loud or quiet, powerful or somber, exotic or sophisticated. DuPont Performance Coatings demonstrates the influences of colours by how tasteful, touching reminiscent or calming a colour will react with consumer preferences and moods. The 2011 DuPont trend show is segmented into four groups, as follows:

Déjà vu – The colours in this group are intense and meaningful as DuPont remembers similar versions of these colours from the past. Rich greens and reds like “Green Velvet” and “Flashback” are historic colours that symbolise thoughtfulness, heritage, comfort and stability. New sparkling effects and intense colours bring a modern fit to white and dark red. Modern shades of gray and beige bring

relevance and quality to the hues, favorites for a mature market and exclusive vehicles.

Sound of silence – Although the colours in this group are slightly muted and quiet, the calming colours featured in this group are determined to make their mark. The eco-friendly hybrids and energy-efficient technologies are thought provoking inspirations for the future. In this group, colour is influenced by nature’s palette and the fast-growing world of technology. Sophisticated metallic, soft hues “Crescendo” and “Silent Auction” and earthy tones “Minor Gamut” and “Speechless” coexist in this group, and its dynamic make-up is a natural trend for global consideration.

Touch of Blue – This group focuses on the intense emotional attributes of colour, inspired by the environment. Home accessories and interior design inspire some of the bright and rich blues in this group. Fashion inspires this group, as well, particularly in the pale blue and grayish undertones. The sense of familiarity and dramatic

impulses of the light metallic and chromatic hues make this group popular among all vehicle segments, which includes contrasting sober shades like “Tactile Teal” and “Tickled Blue.” DuPont has tracked blue trends in all markets, including automotive to best new style spaces for the automotive segment. This demand is expected to grow as the global focus on blue increases.

Matter of Taste – The exaggerated and unusual colours featured in this group offer a creative menu of colours that spotlight international flavors. Powerful shades of yellow, green, pink and purple bring excitement to a fearless group of colours. Caramel, tangerine and other savory colours are eye-catching and perfect for new vehicle launches, brand colours, concept vehicles, limited editions and the aftermarket. They put the individual taste of the driver at the forefront and include colours such as “Sweet Caramel” and “Berry Fusion.”

REAdER REPly 011235


NEWS


MOTOrSPOrTNEWSMOTOrSPOrT


Return of the Golden Age?Bernard Carpinter reports on the renaissance men of NZ motorcycle racing.

New Zealand motorcycle racing is on the up, with strong entries for the present season and new stars emerging after a period of stagnation. The Suzuki International Tri-Series, raced over three rounds in December, illustrated this resurgence, although it also showed that we cannot quite match the standard of the top Australians right now.

We still have a way to go to get back to our earlier golden ages, such as when Aaron Slight came so close to winning the World Superbike Championship, Simon Crafar won a 500cc Grand Prix and Andrew Stroud – who had competed in both those series – won the world BEARS (British European American Racing Series) on the bike designed and built in Christchurch by John Britten.

A little before that Graeme Crosby won the old Formula One motorbike world championship, and finished second in the 500cc championship. In the early 1970s Ginger Molloy and Keith Turner both also finished second in the world 500cc championship, both times to the great Giacomo Agostini, and Kim Newcombe led it on a bike he had built himself before he was killed in a crash. Hugh Anderson won world championships in the smaller classes and, in

a slightly different form of racing, Robert Holden, Bruce Anstey and Shaun Harris won TT races on the Isle of Man.

We have been short of stars since the Slight-Crafar-Stroud generation and several of our top riders are in their late 30s or early 40s. Stroud himself is 44 and the father of eight, but he is fit and fast and he won the 2010 and 2011 New Zealand Superbike Championships.

Indeed, Hamilton-based Stroud also won the Tri-Series Superbike class – for modified road bikes with about 200hp from their 1000cc engines - on his David Reid Homes Suzuki GSX-R1000 although he

finished first only once in his six races. That was the second race at Manfeild, in round two.

Rising star Nick Cole, 25 and also from Hamilton, achieved his first victory at the top level when intelligent riding in very difficult conditions brought him the win in the first Manfeild race on his Kawasaki ZX-10.

Cole, a former 600cc Supersport champion just starting his second season in Superbikes, rode a very strategic race. A damp track forced the riders to start with wet-weather tyres but during the race the track dried out and the tyres took a hammering. Cole restrained himself early on to conserve his tyres, so he could charge later on when others were coping with worn-out tyres. Ray Clee had a big lead on his Suzuki but Cole reeled him in. “I could see Ray’s tyres were getting wrecked and he was sliding around, so I thought I’ll make my charge now,” says Cole. He grabbed the lead on the last lap, getting a better drive out of the hairpin.

Wellington’s Sloan Frost, also in his 20s, had some bad luck during the series but still managed a third and a fourth on his BMW S1000RR. Rookie Scott Moir, an accomplished rider in several other

Andrew Stroud leads Ray Clee at Manfeild Photo by fotocd.co.nz

Dan Stauffer rides his Yamaha on rails at Cemetery Circuit

NEWS


categories including motocross, did very well in his first Superbike races and finished fifth in the series on his Honda CBR1000RR, one place behind the young but much more experienced Hayden Fitzgerald from New Plymouth on another Honda.

Of the more established riders, Craig Shirriffs from Feilding scored two podium finishes on his Suzuki but did not finish the other two races he contested. He did not race in the final round at Wanganui. Ray Clee from Kumeu had been very fast in earlier seasons but in recent times he had lost some of his pace – mainly because he builds race engines for other riders and gets so busy before the season he does not have time to prepare himself properly. This time he managed to get in some pre-season racing at minor events with his Suzuki and he was back to his best, very nearly beating Stroud in the second heat at Manfeild.

Going back to the first round at Hampton Downs, Australian Robbie Bugden, a former New Zealand champion, won both the races riding a Suzuki for Peter “Red” Fenton’s Christchurch-based Triple R team. Bugden, who has had some great battles with Stroud over the years, was race-sharp after contesting the Australian Superbike Championship but he did not have things all his own way.

Stroud led the first race till a gremlin struck. “It was

like someone had turned the key off,” says Stroud. “I pulled off and Robbie and Craig [Shirriffs] came past. But then it started again and it was fine till the end of the race.” He finished third, behind Bugden and Shirriffs. In race two, Stroud tailed the Australian through the first half of the race, but lost ground when he got held up by a lapped rider.

Cemetery CircuitThese two meetings were the lead-up to the big

one - Wanganui, a street race with history going back to the early 1950s and always attracting at least 10,000 fans. The tight, bumpy little Cemetery Circuit (yes, it goes through the town cemetery) is quite different from a proper racetrack and usually it takes riders a few visits before they can really go fast. It doesn’t pay to make mistakes, because most of the corners have no run-off and if you go too fast you hit a hay bale or worse.

In 2010 Australian Dan Stauffer amazed the locals by winning the Robert Holden Memorial feature race at his first attempt, riding a Yamaha for Brian Bernard’s Wanganui-based team. At his second appearance, with the same team, he excelled himself by winning the two preliminary races as well as the feature event. With a background in motocross he was not too worried about having the bike bouncing and sliding around.

Stroud put up a good fight in two of the races but

was hindered by problems getting the suspension and brakes to work the way he wanted them to. Cole is great on street circuits and he finished second in the feature races, after posting second and third in the first two heats. He was handicapped by qualifying fourth, which put him on the outside of the front row and left him vulnerable to getting pushed wide at the first corner. With a better position on the start grid he might have pushed Stauffer really hard.

The two preliminary heats were the final points races in the Tri-Series and Stroud’s second and third placings were all he needed to wrap up the series for the fourth year in a row. Cole was second overall and Clee, who had scored a fifth and a fourth in the Wanganui points races, third. A fourth in heat one helped Fitzgerald finish fourth overall, ahead of fellow Honda riders Scott Moir and Ryan Hampton. Stauffer appeared only at Wanganui.

The class immediately below Superbikes is 600cc Supersport and this is where ambitious young riders have to make their mark. And Jaden Hassan did just that at the first round of the Tri-Series. The tall, lean 17-year-old Aucklander, who has been getting coaching from Graeme Crosby, won both his races from a strong field including national champion Dennis Charlett from Christchurch and Glen Skachill from Wellington. Hassan rode a Yamaha, the other two Suzukis.

Skachill, 21, struck back with two wins at Manfeild, Hassan second both times. At Wanganui Skachill and Charlett raced nose-to-tail through both races, each scoring a first and a second. Skachill, who is aiming to move up to Superbikes next season, won the series from Charlett, as Hassan did not go to Wanganui.

Looking further into the future, the series saw the racing debut of Andrew Stroud’s oldest son Jacob, just turned 13. Jacob is well known in the paddock as he has always accompanied his father to the circuits and his knowledge of motorcycle racing is such that in recent years he has often been asked to help with race commentaries. An intelligent young man – he skipped a year at school – Jacob acquitted himself very well on his Suzuki RG150 two-stroke in the Ultra-Lite class so don’t be surprised to see his name featuring prominently in the coming years.

The crowd goes wild at Wanganui

Andrew Stroud and his son Jacob.

A good field of Superbikes just after the start at Hampton Downs in the Suzuki Tri-Series.

REAdER REPly 011237

CLaSSIFIEDS

Send details and pre–payment cheque to: Motor Equipment News Classifieds.

Freepost 4359, P.O. Box 65 092, North Shore 0754. You can also fax to: 09–478 4779

Payment Cheque Visa Mastercard

Name on Card .....................................................Card Number:

■■■■ ■■■■ ■■■■ ■■■■Expiry Date: ....................................... / ...............

Signature: ............................................................

Please tick the appropriate category

Situations Vacant Motor Parts ServiceMachinery For Sale Wanted To BuyBusinesses for Sale Other

motor equipment news classiFieds really work For you! At just $49.95 (inc GST) per issue for up to 30 words FANTASTIC VALUE – reaching over 45,000 automotive readers each month! 60 cents for each additional word.

Company Name: ........................................

Contact: ....................................................

Address: ....................................................

City: ...........................................................

Tel: ............................................................

Fax: ............................................................

E–mail: .......................................................

Enter your advertisement in the space below.Maximum of 30 words, to appear single column.Please highlight my advert

BOxEd additional $5 rEVErSEd additional $10

Redundant Equipment? Need new staff? Buying/selling a business?

motor equipment news classiClassified Selling

ALL TRAILER WHEELS Industrial, ATV, Solid Rubber, Agricultural, Lawnmower, Barrow Wheels, Turf, Industrial, Trailer, Hay-Rake, Go-Kart Tyres and Tubes. Towballs. Rims. Jockey Wheels. Whangarei Importing. Nationwide Delivery. Phone 0800 653 246.

BEAMSETTER (HEAdLIgHT ALIgnER) - New. plus other WOF equipment. Phone Stocks Equipment on 0800 863 784 or email: [email protected]

BRAKE LATHE. New Caorle Brake Lathes. Made in Italy. On & Off Car. Phone Stocks Equipment on 0800 863 784 or email: [email protected]

BRAKE TESTER - New MAHA brake testers.Phone Stocks Equipment on 0800 863 784 or email [email protected] for more information.

CAR HOIST – BRAnd nEW 2 POST HOISTS available from only $3,195 + GST installed. Also 4 Post Hoists, Wheel Alignment Scissor Lifts, Belly Lifters also available. Phone Stocks Equipment 0800 863 784 or email: [email protected]

TYRE CHAngER - CORgHI. New & used Tyre Changers. Phone Stocks Equipment on 0800 863 784 or email: [email protected] for more information.

WHEEL ALIgnER - HUnTER. New & used Wheel Aligners, Phone Stocks Equipment on 0800 863 784 or email: [email protected] for more information.

WHEEL BALAnCER - CORgHI. New & used Wheel Balancers. Phone Stocks Equipment on 0800 863 784 or email: [email protected] for more information.

AIR COndITIOnIng PARTS And SERVICE. Contact Kensair, your one-stop-shop for all automotive air-con replacement parts and service equipment. Quality parts, quality service, technical back-up. Phone: 0508 197 197

ALFA ROMEO PARTS - for late model vehicle specialising in mechanical and body parts. Italian Autos, 23 Salesyards Rd, Otahuhu Ph (09) 276 7245

CHRYSLER, JEEP, dOdgE. Covering most makes and models, new, used and replacement parts 1992-2010. Shipping nationwide daily. Call Hi Tech Auto Parts. 0800 244 832 www.hitechautoparts.co.nz

EngInE IMPORTS. Huge range of new & used Japanese engines from $495. Mazda WLT, RFT, TF, R2, 13BTT. Nissan SR20DET, RB25DET, RB26DETT, TD27, QD32, QG15, YD25. Mitsi 4D56T, 6G74, 4G63BT. Toyota 14B, 15B, 2L, 3L, 2AZ, 1AZ, 3SGTE. Available now, genuine MITSI 4D56 complete engines turbo & non turbo. We’ve been in business over 30 years with the same suppliers. All engines guaranteed. Call now: 0800 627 424

EngInE IMPORTS. Power Plus generators from $295. 2.0KVA up to 6KVA petrol or diesel. Power Plus water pumps & trash pumps from $495. Call now for a brochure: 800 627 424

EngInE IMPORTS. Performance car dismantling. Wrecking now Mitsi EVO 1-7, Nissan R32 GTR, Nissan S13 Sylvia, Subaru WRX 92. Call now: 0800 627 424

FIAT PARTS. All genuine new parts, used for late model vehicles. Specialising in Mechanical and body parts. Italian Autos 23 Salesyards Rd, Otahuhu. Tel (09) 276 7245, Fax 276 6957

HOndA dISTRIBUTORS New, Excellent prices! See our website for more information: www.hitechautoparts.co.nz under New Parts. Call 0800244832

HYUndAI gEnUInE PARTS Ph 09 444 7777 North Harbour Hyundai for all your parts requirements Very competitive pricing on Mechanical and Panel Parts to the trade. Fast friendly service. Visa and Mastercard accepted.

KIng–PIn KITS, TIE ROd EndS, suspension parts, spring shackles etc for all makes and models, especially: Austin, Chevrolet, Chrysler, Essex, Ford, Hillman, Morris, Standard, Vauxhall. Ronald Lever, 87 Tui Road, Papatoetoe,Auckland 2025. Ph 09 278 3888 (evenings)

LUMEnITIOn IgnITIOn SYSTEMS. Kits available for most vehicles to replace points and condensor with electronic ignition system by Lumenition UK. Contact N.Z. distributor Swift Automotive 31 Carmen Road, Christchurch Phone (03) 349 7446 Fax (03) 349 5990

MERCEdES A160S Dismantling now. Cashel Rover Parts - 342 Cashel Street, Christchurch. Phone: 0800 422 743

MERCEdES BEnZ PARTS. We sell genuine parts for all models irrespective of age. Very competitive pricing, fast & efficient service you can rely on. Try us for accessories, merchandise & the less common parts. Armstrong Prestige, Christchurch Ltd. 6 Detroit Place, Christchurch. Ph: (03) 343 8119 or email [email protected]

MgF‘S dISMAnTLIng. We have now dismantled 15 MGF’s, all models 1995-2000. Good range of parts mechanical & panel. More arriving weekly. Phone: M G Service Centre, Christchurch, Ph 03-365-0151. e-mail: [email protected]

MInI PARTS. Contact Swift Automotive at 31 Carmen Road, Christchurch for the largest range of new mini parts in N.Z. (standard, performance and/or restoration)Phone (03) 349 7446 or Fax (03) 349 5990

PORSCHE SAAB & VOLVO PARTS. Full range of OEM service parts. Parts Plus Ltd, 160 Tinakori Road, Wellington. Phone: (04) 471 2755 Fax (04) 471 2756

REnAULT PARTS – New, used and rebuilt for Clio, Megane, Laguna, Scenic, RX4, Safrane, R19, R21, R25 and more. NZ’s largest independent supplier. Renno Parts (NZ) Phone: 0508 473 666

ROVER CAR PARTS 75s,114, 214, 216, 200, 416, 420, 600s, 820, 825, MGF and Landrover Freelander KV6 x 2. Most used, but some new. Have dismantled over 100 Rovers.Cashel Rover Parts - 342 Cashel Street, Christchurch. Phone 0800 422 743

SU CARBURETTORS. Swift Automotive at 31 Carmen Road, Christchurch are NZ stockists for SU and carry an extensive range of spares (including over 800 different needles).Plus offer a rebuilding service. Phone (03) 349 7446 Fax (03) 349 5990

TOYOTA PARTS. Vitz/Platz 1000 cc 1SZFE timing chain kits. Hydraulic drive belt tensioners for most Toyotas. Central locking door actuator motors, window regulators. Many other parts imported to order. Email [email protected] Ph: 027 602 8166

WIndOW REgULATORS for European & Japanese cars. Ford Falcon, Honda, Mazda door actuators & kits. Timing chain kits Japanese made, Vitz 1000cc, 4M4O Mitsubishi & others. Parts imported to order. Email [email protected] Ph: Len, 027 602 8166

CYLIndER HEAdS nEW – bare or complete from $360 retail + g.s.t. CHEV 350, ISUZU 4JG2, 4JG2T MAZDA WLT, FE, F8, R2, RF MITSUBISHI 4D56, 4D56T, 4G54, 4M40T, 4G63, 4G64, 4D30, 4D31, 6G72 NISSAN TD27, TD27T, SR20, QD32, Z24 TOYOTA 1FZ, 1KZ ,1RZ, 1KZTE, 2C, 2CT, 2L, 2H, 2LT, 2LT2, 2RZ, 22R, 3B, 3L, 3Y, 3CT, 3RZ, 3VZ, 4Y, 5L, 5S. 6 months parts & labour guarantee, also a full range of used, tested complete cylinder heads available from $450 retail +g.s.t Phone DODSON JAPANESE AUTOSPARES 09 441-3152 or [email protected]

ALTERnATORS refurbished from $175 retail + g.s.t. most Japanese models available 6 months parts & labour guarantee also a full range of used guaranteed Alternators available from $120 retail +g.s.t. Phone DODSON JAPANESE AUTOSPARES 09 441-3152 or [email protected]

nEW dISTRIBUTORS from $350 retail + g.s.t. Mazda/Ford 2lt V6 FS, Honda Prelude, Accord, Civic, Integra. Also a complete range of used Japanese guaranteed distributors available from $80 retail +g.s.t. Ph DODSON JAPANESE AUTOSPARES 09 441-3152 or [email protected]

nEW EngInES – Short block, Long block and complete engines $1650 - $2500 retail +g.s.t. Toyota 2RZ, 3Y, 4Y Mitsubishi 4D56 12 months parts & labour guarantee, also a complete range of used guaranteed petrol & diesel engines available. Phone DODSON JAPANESE AUTOSPARES 09 441-3152 or [email protected]

STARTER MOTORS nEW from $150 retail + g.s.t. 6 months parts & labour guarantee USED from $85 retail + g.s.t. 60 day parts & labour guarantee. Phone DODSON JAPANESE AUTOSPARES 09 441-3152 or [email protected]

USEd gEnUInE JAPAnESE PETROL EngInES – from $700 retail +g.s.t. 12 months parts & labour guarantee, also a comprehensive range of Japanese diesel engines available. Phone DODSON JAPANESE AUTOSPARES 09 441-3152 or [email protected]

MACHINERY/EQUIPMENT

MoToR PARTs sERvICEs

target oVer 11,000 Businesses! contact dan to discuss adVertising in the classiFieds. ph annie 09 477 0364


BUSINESS DIrECTOrY


To target over 11,000 automotive trade businesses

advertise in the business directory from $222 and

geT resulTs!

News

To find out how call sales on 09 477 0364

Wanting to expand or increase your tyre opportunities and sales?

Tyrepower NZ Ltd, currently 19 stores nationally, is looking for new members in selected regions to join the proven

Tyrepower cooperative business model.

Contact Craig Johnstone [email protected] (09) 273 8438

GENUINE PARTS DIRECT

0800 223 221

• The only authorised supplier of Volkswagen,

Audi, Skoda and Porsche genuine parts in NZ

• Two-year factory warranty

• Competitive pricing

• 70,000 items in stock

EMD0042 Motor Equip 137x84.indd 1 22/11/11 10:45 AM

THE VEHICLE SANDBLASTING SPECIALISTSLE EE SASASASASANNDNDNDNDBBLASTING SPG SP

1

DDDBLBLBLBLASASASASTTT

2INSERVICE RUST REMOVAL Cars, Trucks, 4x4s Phone (09) 443 6574 www.blasta.co.nz

PE LAL SISI TSECI LLALISISISISTTSTINGNG SSPNGNG PEPEPEPEPE LALAEEEECICICICIALALALALTITITINGGGGGNGN SSSSSSSPPPPPNGNGNGGNGN SS

3

GBi GEARBOXESInternational Ltd

New and re-conditioned

gearboxesCall us 09 827 1425 or email: [email protected] • 41 Veronica

Street, New Lynn, AucklandTo see the full range www.gearboxes.co.nz

Regis Coatings Ltd0800 542 542 www.regiscoatings.co.nz

OEM parts rEviEw Oils and lubricants

FEaturEs in thE March 2012 issuE

rEad all abOut thE changEs and thE latEst prOducts availablE FOr yOur autOMOtivE businEss

Oils and lubricantsOils and lubricantsOils and lubricantsOils and lubricantsOils and lubricants

SUPERIOR TECHNOLOGY - MAXIMUM PERFORMANCE - MODERN DESIGN

NOW AVAILABLE

FROM

SUPERIOR TECHNOLOGY - MAXIMUM PERFORMANCE - MODERN DESIGN

motor equipment news february 2012

Documents

editor automotive

new technology

mairangi baypo box

newsnewsnewsnewstop

boat trailersnarva new

tool feature

thermal control parts

circulation manager