MoshellCommands

Introduction Moshell is a command interface to access the Network Nodes. Normally we use Moshell to change parameters, get dumps from the Network Nodes, collect performance counters, lock and unlock cells, get alarms, get instantaneous cell information and another many actions that can be sent to the network elements such as, restart, calibrate the RET Device, Start hardware test,etc. Using Moshell, RF Engineers can save a lot of time and money when analyzing counters and running scripts from the office.

Logging in to a Node

The first step to start using moshell is to log in to a node:Usage: ./moshell nodename or node ipddress

Examples: Logging in to a RNC

Logging in to a Node B:

BASIC MO COMMANDS lt/ltc[1-9]

To read the list of MOs in the store in moshell memory.

Most common is to use lt all.

Example: lt

BASIC MO COMMANDS lt Loading the MO RbsLocalCell

BASIC MO COMMANDS get/lget Reads attribute(s) from MO(s).

Usage: lget MO Atribute Examples: lget

BASIC MO COMMANDS st/lst Prints administrative state and operational state of MO's

Usage: st MO Example: st

UER1463_JOUHAYNA_IBS> st AiDevice

OR

BASIC MO COMMANDS set[m]/lset[m] Set an attribute value on one or several MOs

Getting the MO, the Attriute and the Value:

Usage: lset MO attribute Value

Setting the values on one MO (electricalantennatilt)

OTHER MO COMMANDS inv[hr] Complete HW/SW inventory. Includes information about RPUs, licensing, JVM, devices,XPs, ISL, etc.

Usage inv

OTHER MO COMMANDS str Print status of the IubLinks/AbisLinks and their associated Cells and Channels

Example

OTHER MO COMMANDS al[atk] Print the list of active alarms. Acknowledge/Unacknowledge an alarm

OTHER MO COMMANDS lg[aevsmircdyuolh] Fetching and/or processing of node logs (alarm, event,availability, system, etc) . Most common lga Alarm Log Getting the Alarm Log for a site Usage lgar startdate enddate

UER1463_JOUHAYNA_IBS> lgar 20142011 201422111

OTHER MO COMMANDS cab[slxradgtm] Display printouts relating to hw, sw, restarts, leds, cpu load, errors, disk/ram usage. Usage: cabx